Senior Electrical Engineer with 12.5 Years experience in Engineering and Design of Oil & Gas,Refinery and Petrochemical Plants/Facilities

1. PERSONAL AND CONFIDENTIAL
IMAN KALYAN MUKHERJEE
Address Najda Street, Abu Dhabi, United Arab Emirates, P.O. Box: 44169
Phone +971528938960,+97126223063,+919836796254
E-Mail iman_mukherjee@yahoo.com
Seeking assignments in Engineering & Design with an organization of repute
Synopsis
 12.5 years of experience in Engineering Consultancies, in the Oil & Gas,Refinery and
Petrochemical sector, currently working with Worley Parsons, Abu Dhabi as Senior
Engineer: Electrical. Have been working as Electrical Discipline Lead Engineer for Shell
BGC Umbrella contract for the last 2.5 years, successfully delivering upon over 30K Man-
hours worth of Engineering Deliverables, Procurement Support and Site Support Activities.
Responsibilities include managing a team of 7 Engineers and 3 Designers, Inter-Discipline
Coordination, Man-power planning, project scheduling, budgeting and delivering on the project
maintaining the quality of deliverables within the productivity targets.
 Thorough understanding of the various procedures in design and engineering of oil & gas,
refinery and petrochemical installations.
 Adept at various aspects of Electrical Engineering including system studies, equipment sizing
calculations, hazardous area classification studies, engineering layouts among others.
 Experienced at planning for project manpower requirement and ensuring delivery of projects
maintaining budget and productivity targets.
 An effective communicator with good analyzing and problem solving skills.
Core Competencies
Engineering & Design
 System studies with working knowledge of ETAP for Load Flow Studies, Short Circuit
Calculation, Harmonics Studies and Motor Start Up Studies (Dynamic and Static Motor Start
Up).
 Preparation of Key Single Line Diagrams.
 Preparation of Metering and Protection Single Line Diagrams.
 Load Analysis and preparation of Electrical Load Schedules.
 Sizing of equipments: Transformers, NGR, Capacitors, Switchboards, DC and AC UPS, EDG.
 Earthing & Lightning Protection Calculations, Lighting Calculations, Cable sizing.
 Review of Substation Equipment Layouts, Cable Routing Layouts.
 Review of control schematics of switchgear.
 Preparation of Datasheets and Material Requisitions.
 Preparation of RFQs for Long Lead as well as Package Items, Review of Vendor Documents for
the same.
 Hazardous Area Classification Studies and preparation of HAC Layouts.
 Equipment Selection for Hazardous Area.

2. PERSONAL AND CONFIDENTIAL
Career Features
Worley Parsons, Abu Dhabi Senior Engineer June’13- Till Date
Projects :
Shell Basra: Shell Umbrella of Rehabilitation and Greenfield Projects in West Quarna,
North Rumeila and Hammar Oil Fields, Iraq: Oct’13-Till Date
 Working as Electrical Discipline Lead Engineer for Shell Basra Umbrella Project Client
being JV of Shell and BGC (Basrah Gas Company, Iraq).
 Responsibilities include : Development of Electrical Design Basis
 Development of Key Single Line Diagram
 Preparation of Electrical Load Schedule
 Development of Metering and Protection Single Line Diagram
 Calculations :
 Earthing & Lightning Protection Calculation
 Diesel Generator Sizing Calculations
 Cable sizing Calculations
 Transformer Sizing Calculation
 Battery and UPS Sizing Calculation
 Lighting Calculation and Panel Schdule
 Power System Study :
 Load flow analysis
 Short Circuit study
 Motor Start up Study
 Layouts :
 Preparation of Substation Equipment Layout.
 Preparation of Cable Routing Layout.
 Preparation of Power Layout.
 Preparation of Earthing Layout
 Preparation of Lighting Layout
 Review of Hazardous Area Layouts.
 Preparation of Specifications :
 Specification for Switchgears.
 Specifications of Transformers.
 Specifications for Prefabricated Modular Substations.
 Specification for LV & MV Motors
 Specification for DC & AC UPS and Battery system
 Specification for Emergency Diesel Generator
 Specification for Bulk Materials
 Lists & Schedules :
 Preparation of Electrical Load List
 Preparation of Switchgear I/O Schedule
 Preparation of Cable Schedule.
 Preparation of Datasheets :
 Datasheet for LV & MV Motor
 Datasheet for MV & LV Switchgear
 Data Sheet for Transformer
 Datasheet for AC & DC UPS

3. PERSONAL AND CONFIDENTIAL
 Datasheet for Diesel Generator.
 Preparation and Review of Switchgear Control Schematics.
 Preparation and Review of Switchgear Interconnection drawing and schedule
 Preparation of Cable Schedules, Cable MTO and Bulk MTO.
 Vendor document review
 Responsible for adherence to proper quality procedures in all project activities as per the
recommendations and requirements of ISO quality procedures.
 Deliver the project within the budgeted hours maintaining progress and productivity
targets.
 Man-power planning for the project and preparing quarterly manpower forecasts for the
discipline.
Successfully lead a team of 7 engineers and 3 designers delivering more than 30,000 hours of
Engineering, Procurement and Construction Support activities and deliverables with an overall
project productivity of 0.95- 1.05,for Shell/BGC Umbrella of projects.
Third River Water Transfer: June’13- Oct’13
 Worked as Lead Electrical Engineer for Third River Water Transfer FEED Project. The site
is at, Iraq. Client being Lukoil
 The responsibilities include preparation of all electrical deliverables including :
 Electrical Load List.
 Single Line Diagram (Key SLD as well as Metering & Protection SLD)
 Calculations :
 Earthing & Lightning Protection Calculation
 Diesel Generator Sizing Calculations
 Cable sizing Calculations
 Transformer Sizing Calculation
 Battery and UPS Sizing Calculation
 Power System Study :
 Load flow analysis
 Short Circuit study
 Harmonics study.
 Layouts :
 Preparation of Substation Equipment Layout.
 Preparation of Cable Routing Layout.
 Preparation of Power Layout.
 Preparation of Earthing Layout
 Preparation of Lighting Layout
 Preparation of Specifications :
 Electrical Design Philosophy
 Specification for Earthing System
 Specification for LV & MV Motors
 Specification for DC & AC UPS and Battery system
 Specification for Bulk Materials
 Lists & Schedules :
 Preparation of Switchgear I/O Schedule
 Preparation of Cable Schedule.
 Preparation of Datasheets :

4. PERSONAL AND CONFIDENTIAL
 Datasheet for LV & MV Motor
 Datasheet for MV & LV Switchgear
 Datasheet for AC & DC UPS
 Datasheet for Diesel Generator.
 Preparation of Switchgear Control Schematics.
 Vendor document review
 Responsible for all quality related issues for all the project deliverables for electrical
discipline.
 Deliver the project within the budgeted hours maintaining progress and productivity
targets.
 Man-hour planning.
Dow Chemical International Lead Engineer May’12- May’13
(India Engineering Center)
Projects :
SADARA Polyethylene Project : May ‘12 – Dec’12
 Worked as the Area Lead for SADARA Polyethylene Train 2 detailed design project. Client
being a Joint Venture of Dow Chemical and Sadara (RTIP) building the largest
petrochemical facility in the world at Al Khobar , KSA, Dow IEC (India Engineering Center)
shall be providing the EPC service to the JV.
 Responsibilities included all design deliverables for Polyethylene Train 2 as follows :
 Preparation of Electrical Load List.
 Preparation of Single Line Diagram.
 System study using ETAP 11.0 (Load Flow Studies, Short Circuit Studies calculating Device
Capability & Dynamic Motor Start Up Study)
 Preparing sizing calculation for all electrical equipment.
 Preparation of Grounding and Lighting Protection Calculation and Layout.
 Preparation of data sheets for all electrical equipment and subsequently participates in
procurement function, by raising RFQ proceeding with TBE and finalising with placing of
P.O.
 Review and prepare all electrical layouts.
 Preparation of Hazardous Area Classification Layout and Selection of Electrical Equipment
for Hazardous Area.
 Liaisons with all inter related disciplines.
 Report directly to the Project Engineering Manager and the Overall Electrical Discipline
Lead for Polyethylene Envelope being accountable for the overall progress, productivity as
well as all electrical design deliverables for Train 2.
SNC LAVALIN Senior Engineer Apr’11- May’12
Projects :
ONGC OPAL :

5. PERSONAL AND CONFIDENTIAL
 Worked as Area Lead Engineer for ONGC OPAL Offsites and Utilities Engineering.
 Responsibilities include the following.
 System Studies including load flow studies, motor start up studies, and calculating device
ratings by short circuit analysis using ETAP 7.5.0.
 Equipment sizing, including Transformer, NGR, Battery and DC UPS Systems, Cable Sizing
Calculations, Voltage Drop Calculations.
 Preparation of Cable Schedules.
 Engineering of Substations including preparation of S/S Equipment Layout, Building Cut
Out Layout etc.
 Preparation of Key SLD as well as individual metering and protection SLD from 6.6 kV to
LT Auxiliary Boards.
 Reviewing of Vendor Packages including Cathodic Protection.
 Preparation of PR and coordination with vendors for all long lead items.
Foster Wheeler India Pvt Ltd Senior Engineer Mar’07-Feb’11
Projects :
OSOS Petrochemicals: Mar’07- Aug07
 Involved in the Front End Engineering of OSOS Petrochemicals.
 Preparation of Key Single Line Diagram Line Diagram.
 Preparation of Electrical Load Schedule.
 Preparation of Metering and Protection Single Line Diagram.
 Cable Sizing Calculation.
 Load Flow Studies, Short Circuit Calculations and Static Motor Start Up Studies using ETAP.
 Preparation of Lighting Calculations and Preparation of Lighting Layout.
 Preparation of Substation Equipment Layout.
 Preparation Of Hazardous Area Classification Layouts.
Karan Gas Facilities : Sep’07-Nov’08
 Involved in the Front End Engineering of a Gas Treatment Facility, client being Saudi
Aramco.
 Responsibilities include development of Key as well as Protection and Metering Single Line
Diagram for MV and LV systems.
 Preparation of Protection and Metering Single Line Diagram for Emergency Diesel
Generator.
 Sizing calculation for Emergency Diesel Generator.
 Preparation of Electrical Load Schedule.
 Power cable sizing calculation.
 Preparation of Cable Routing Layout.
 Preparation of Hazardous Area Classification Layout.
 AC UPS sizing calculation.
 DC Battery Charger sizing calculation.
 Preparation of Datasheets for DC battery charger and AC UPS.
 Grounding System Calculation.
 Preparation of Substation Equipment Layout.

6. PERSONAL AND CONFIDENTIAL
Ras Tanura Intigrated Project Nov’08- Feb’11
 Responsible for the Detailed Feed, client being a Joint Venture of Saudi Aramco and Dow Chemcals.
 Was deputed to the UK headquarters of Foster Wheeler Energy Ltd ,at Reading Berkshire
working as Area Lead Engineer.
 Working as electrical engineer for Hydrocarbons and Aromatics Envelope, and Area Lead Engineer for
Waste Treatment Systems, with the following responsibilities.
 Preparation of electrical load summary.
 Preparation of One Line Diagram.
 Preparation of Trace Heating Schedule.
 Preparation of DC system calculations.
 Preparation of Earthing calculations.
 Review of cable routing layout.
 Cable Sizing Calculations.
 NGR sizing calculations.
 Preparation of Motor Datasheets ( MV and LV).
 Preparation of Switchgear and MCC datasheets ( MV and LV)
 Review of P& ID and identifying control scheme for motors of various ratings.
Reliance Industries Ltd Manager Apr’04-Feb’07
Joined Reliance Industries Limited as GEL ( Graduate Engineer Learner ) in April 2004, and worked
as a Manager from May 2005 – February 2007 upon successful completion of one year training.
Involved in detail engineering activities in the expansion of CPP Jamnagar. Following are the
details of the areas of exposure with RIL Jamnagar:
Detail Engineering:
 Power System Study using ETAP (Load Flow, Short Circuit and Dynamic Motor Start-Up
Studies)
 Preparation of Electrical Load Schedule.
 Preparation of Single Line Diagram.
 Cable sizing for HT/LT motors, transformer feeders, MCC feeders.
 Preparation of cable schedules.
 Sizing of Power and Distribution transformers, and sizing of NGR.
 Earthing and Lighting protection calculations and preparation of Grounding and Lightening
Protection Layout .
 Lighting Calculations for both plant and indoor areas.
 Preparation of Hazardous Area Classification Layouts and Selection of Equipment for
Hazardous Area.
 Preparation of Substation Equipment Layout.
 Preparation of Datasheet for Motors, Transformers, MCCs and Switch Gear.
 Vendor Document Review.
 Preparation of RFQ, participating in TBE and placement of Purchase Order using SAP.
 Review of Control schematics of HT/LT switchgear.

7. PERSONAL AND CONFIDENTIAL
Bharat Bijlee Limited Engineer Aug’03-Feb’04
Joined Bharat Bijlee Limited, Kolkata as Trainee Engineer.
Undergone extensive training in company’s projects department and was absorbed after successful
completion of the training.
Academia
B.Tech in Electrical Engg : Kalyani University 2003 80.49%
Higher Secondary : 10+2 South Point High School, Kolkata 1998 71.1%
Madhyamik :10 South Point High School, Kolkata 1996 77.22%
IT Credentials
Software : ETAP 12.5, Smart Plant 3D, Smart Plant Review,
Personal Vitae
Date of Birth : 17th
May, 1979
Marital Status : Married
Permanent Address : P-69, Greenview, Baishnabghata, Kolkata-700084
Email id : iman_mukherjee@yahoo.com
Phone : +971528938960,+97126223063,+919836796254
Passport Number : G1767968.