Zig Bee
•
0 likes•54 views
The document discusses the Zigbee wireless networking standard. It notes that Zigbee was created to meet the needs of low-power wireless sensor and control networks. It operates on the IEEE 802.15.4 standard and features low power consumption, low data rates, secure mesh networking, and is used in applications like home automation, consumer electronics, and industrial controls. The document provides information on Zigbee network topologies, device types, general characteristics, and compares it to other wireless standards like Bluetooth and PLC.
Report
Share
Report
Share
Recommended
Zigbee technology
ZigBee is a wireless technology standard developed for low-cost, low-power wireless networks for applications like home automation and industrial control. It uses small, low-power digital radios to form mesh networks that can self-heal and scale to thousands of devices. ZigBee networks are reliable, secure, and interoperable, allowing devices from different manufacturers to communicate. Common applications of ZigBee include smart energy, lighting controls, HVAC systems, medical devices, and more due to its ability to run for years on inexpensive batteries.
ZIGBEE TECHNOLOGY
ZIGBEE TECHNOLOGY "Wireless Control That Simply Work"
Description & details about ZIGBEE TECHNOLOGY.
Seminar presentation submitted at Jaipur National University
by Sidhant Raj (ECE) & Yuvaraj (CSE).
Introduction to zigbee
ZigBee is a wireless technology standard created for low-power wireless networks. It uses small, low-power digital radios to transmit data over short distances. ZigBee networks are commonly used in wireless control and monitoring applications that require long battery life, such as home automation and industrial control systems. ZigBee operates on open global standards and has low manufacturing costs, making it suitable for a wide range of wireless control and monitoring applications.
Zigbee with home automation
This document discusses Zigbee home automation and wireless monitoring technologies. It provides an overview of Zigbee including its history, protocols, topology using mesh networks, applications in home automation by integrating sensors. Zigbee allows forming ad-hoc networks for low data rate monitoring applications. It also discusses other wireless technologies like Li-Fi and RFID and their roles. The document describes how a virtual home software can be used to remotely monitor and control lighting, security and HVAC systems using different sensor types.
Zigbee
This document provides an overview of Zigbee wireless sensor networks. It discusses the introduction of Zigbee including its data rates up to 250 kbps, range of 10-75 meters, multi-level security, and battery life of up to 2 years. Applications of Zigbee are also presented. Several common attacks on Zigbee networks are described such as end-device sabotage, network key sniffing, replay, packet interception, and network discovery attacks. Countermeasures to these attacks including remote alerting systems, use of high security levels, intrusion detection systems, and timestamping mechanisms are proposed.
Zigbee For Home Automation
Zigbee is an open standard for home automation that allows for interoperable, low-cost devices that provide energy savings, comfort, and security for consumers without vendor lock-in. It uses a 16-bit network address for each device in a typical home automation network that includes smart devices for energy monitoring and load balancing, with demand response programs that can send text alerts to consumers.
Dccn ppt
The document presents information on ZigBee, a wireless networking standard. ZigBee is designed for low-cost, low-power wireless mesh networks for applications like wireless light switches, sensors, and industrial equipment. It operates on frequencies of 2.4GHz, 915MHz, and 868MHz and can transmit data at rates up to 250kbps. ZigBee networks consist of coordinator devices, router devices, and low-cost end devices and use 128-bit encryption for security. The standard supports mesh networking and is useful for applications requiring low data rates and long battery life.
Zig bee
This document provides an overview of ZigBee wireless communications presented by several students. ZigBee is a wireless standard designed for control and sensor networks that operates on top of the IEEE 802.15.4 standard. The presentation covers what ZigBee is, how it works, academic research on ZigBee, current and future products that use ZigBee, and its position in the hype cycle of emerging technologies.
Recommended
Zigbee technology
ZigBee is a wireless technology standard developed for low-cost, low-power wireless networks for applications like home automation and industrial control. It uses small, low-power digital radios to form mesh networks that can self-heal and scale to thousands of devices. ZigBee networks are reliable, secure, and interoperable, allowing devices from different manufacturers to communicate. Common applications of ZigBee include smart energy, lighting controls, HVAC systems, medical devices, and more due to its ability to run for years on inexpensive batteries.
ZIGBEE TECHNOLOGY
ZIGBEE TECHNOLOGY "Wireless Control That Simply Work"
Description & details about ZIGBEE TECHNOLOGY.
Seminar presentation submitted at Jaipur National University
by Sidhant Raj (ECE) & Yuvaraj (CSE).
Introduction to zigbee
ZigBee is a wireless technology standard created for low-power wireless networks. It uses small, low-power digital radios to transmit data over short distances. ZigBee networks are commonly used in wireless control and monitoring applications that require long battery life, such as home automation and industrial control systems. ZigBee operates on open global standards and has low manufacturing costs, making it suitable for a wide range of wireless control and monitoring applications.
Zigbee with home automation
This document discusses Zigbee home automation and wireless monitoring technologies. It provides an overview of Zigbee including its history, protocols, topology using mesh networks, applications in home automation by integrating sensors. Zigbee allows forming ad-hoc networks for low data rate monitoring applications. It also discusses other wireless technologies like Li-Fi and RFID and their roles. The document describes how a virtual home software can be used to remotely monitor and control lighting, security and HVAC systems using different sensor types.
Zigbee
This document provides an overview of Zigbee wireless sensor networks. It discusses the introduction of Zigbee including its data rates up to 250 kbps, range of 10-75 meters, multi-level security, and battery life of up to 2 years. Applications of Zigbee are also presented. Several common attacks on Zigbee networks are described such as end-device sabotage, network key sniffing, replay, packet interception, and network discovery attacks. Countermeasures to these attacks including remote alerting systems, use of high security levels, intrusion detection systems, and timestamping mechanisms are proposed.
Zigbee For Home Automation
Zigbee is an open standard for home automation that allows for interoperable, low-cost devices that provide energy savings, comfort, and security for consumers without vendor lock-in. It uses a 16-bit network address for each device in a typical home automation network that includes smart devices for energy monitoring and load balancing, with demand response programs that can send text alerts to consumers.
Dccn ppt
The document presents information on ZigBee, a wireless networking standard. ZigBee is designed for low-cost, low-power wireless mesh networks for applications like wireless light switches, sensors, and industrial equipment. It operates on frequencies of 2.4GHz, 915MHz, and 868MHz and can transmit data at rates up to 250kbps. ZigBee networks consist of coordinator devices, router devices, and low-cost end devices and use 128-bit encryption for security. The standard supports mesh networking and is useful for applications requiring low data rates and long battery life.
Zig bee
This document provides an overview of ZigBee wireless communications presented by several students. ZigBee is a wireless standard designed for control and sensor networks that operates on top of the IEEE 802.15.4 standard. The presentation covers what ZigBee is, how it works, academic research on ZigBee, current and future products that use ZigBee, and its position in the hype cycle of emerging technologies.
zigbee communication
Zigbee is an IEEE 802.15.4-based specification for creating personal area networks with small, low-power, low-cost wireless connections designed for Internet of Things and machine-to-machine applications. It was created by the Zigbee Alliance, which includes members like Philips, Motorola, Intel and HP. Zigbee supports low data rate transmissions, star or peer-to-peer network topologies, hundreds of devices per network, and low power consumption, making it well-suited for wireless sensor and control applications that don't require high data rates but do need low cost and low power usage.
Zigbee technology ppt
A wireless technological device which is popular for extremely low power, and low bit rate wireless PAN technology called “zigBee”.
Zigbee technology
This document provides an overview of ZigBee wireless communication technology. It discusses the ZigBee protocol which is based on the IEEE 802.15.4 standard and adds network construction, security, and application services. The ZigBee Alliance develops the ZigBee specification and promotes its adoption. ZigBee is designed for low data rate, long battery life applications like home automation, lighting control, and sensor networks. It supports star, tree, and mesh network topologies operating in the 2.4GHz band with data rates up to 250kbps. The document outlines the physical, MAC and network layers of ZigBee and discusses security, topologies, and applications of the protocol.
Zigbee technology [autosaved]
This seminar report provides an overview of ZigBee technology. It defines ZigBee as a wireless networking standard intended for low-power devices. The report outlines ZigBee's key characteristics including low cost, low power consumption, mesh networking topology, and built-in security. It also describes ZigBee's protocol stack and compares it to other wireless technologies like Bluetooth and Wi-Fi. Common applications of ZigBee technology include home automation, wireless sensor networks, and industrial control.
Smart home solution
For inquiry: srvice@zugonow.com
Visit Zugo: http://www.zugonow.com/
Our smart home system not only secures your property, but it also provides a comfortable living environment. The application covers House, Hotel, Office, Retails, and Agriculture. In addition, we provide 3 Years Warranty for all surveillance system and ZigBee Smart House solution!
Wireless standards
This document provides an overview of Bluetooth and Zigbee wireless technologies. It discusses Bluetooth standards, classes, software, and applications. Bluetooth was developed in 1994 and operates at 2.45GHz using frequency hopping. Zigbee was created for low-power wireless sensor and control networks. It has a layered architecture based on the IEEE 802.15.4 standard and supports three device types: coordinator, full function device, and reduced function device. The document compares Zigbee to Bluetooth and other wireless protocols, outlines Zigbee characteristics and applications, and concludes that Zigbee will likely be the basis for future home networking solutions.
Zigbee - Building Smart Homes
Using IEEE's Zigbee Protocol to design a low power, noise efficient node for home automation. The presentation provides some of the key ingredients and working modes for the Zigbee Protocol. Many companies like (DiGi) built smart zigbee radios (commercially named: XBee) based on these protocol stacks, which now help reshaping wireless sensor networking and low power consumer electronics integration .
Zigbee wireless control made easy
The document discusses ZigBee, a wireless technology standard for low-power wireless networks. ZigBee targets monitoring and control applications with low data rates and infrequent data transmissions from sensors and controllers. It operates on the IEEE 802.15.4 standard and forms mesh networks for reliability and range. The ZigBee Alliance has over 150 member companies working to enable interoperable, low-cost products based on the ZigBee standard across various market applications including home automation, lighting, HVAC, security, and industrial control.
Smart home solution
tiPO Global Corp provides smart home solutions using ZigBee wireless networking technology. Their solution includes various sensors that can monitor a home for intrusion, fires, gas leaks, temperature and more. The sensors communicate wirelessly over ZigBee networks that can support up to 65,000 nodes within a 300 meter diameter. The sensors send data to a gateway and app to allow for remote monitoring and control of the smart home system from a smartphone. tiPO also offers similar agricultural monitoring systems for greenhouses.
Updated ZigBee .ppt
Debjeet Chakroborty presented a technical seminar on Zigbee technology under the guidance of Dr. Umashankar Ghugar. The presentation covered the introduction of Zigbee including its architecture, types of devices, network topologies, advantages, disadvantages, characteristics, applications, and conclusion. Zigbee is a wireless standard designed for low-power networks that allows devices to communicate with each other within short distances. The presentation discussed Zigbee's six-layer architecture, three device types, common network topologies like star, mesh and cluster-tree, and applications in home networking, industrial control, and medical data collection.
Zigbee ppt
ZigBee is a wireless networking standard used for control and sensor applications that requires low data rates, low power consumption, and secure networking. It is based on the IEEE 802.15.4 standard and allows for up to 65,000 nodes to connect in a mesh network topology. ZigBee operates in the 2.4GHz, 868MHz, and 915MHz frequency bands and is designed for use in personal area networks for applications like home automation, lighting control, and wireless sensor networks. Research is ongoing to expand ZigBee's uses in fields like wireless communications and neuroengineering.
Zig bee
This document discusses the wireless communication technology Zigbee. It begins by defining Zigbee as a technological standard created for control and sensor networks, based on the IEEE 802.15.4 standard. It then contrasts Zigbee with other wireless technologies like WiFi and Bluetooth by noting that Zigbee is designed for low data rates and power consumption, and controlling physical devices. The document outlines Zigbee's architecture including coordinator, router, and end device roles. It provides examples of Zigbee applications in building automation, industrial control, home automation, and more.
ZigBee Technology
ZigBee is an IEEE 802.15.4-based specification for personal area networks that uses low power wireless transmissions between devices. It was standardized in 2003 and revised in 2006. ZigBee networks can support up to 65,000 nodes and consume very low amounts of battery power. Common applications of ZigBee include wireless sensor networks, home automation and control, and medical data collection.
Introduction to Ti wireless solution: ZigBee
Represent Texas Instrument to design the syllabus and conduct a 3 hours workshop for Republic Polytechnic on ZigBee and MSP430 in Singapore.
The Differences of between ZigBee and Bluetooth technologies
ZigBee and Bluetooth are wireless network technologies but they have key differences. ZigBee is intended for low data rate, long battery life applications like sensor networks and home automation. It has a range of 10-100m, very low power consumption, supports large networks, and a long battery life. Bluetooth is intended for cable replacement between devices like phones, laptops, and headsets within 10m. It has higher data rates but also higher power consumption and shorter battery life than ZigBee.
Blutooth vs zigbee
This presentation introduces Bluetooth technology. It is comprised of four group members and discusses Bluetooth's features such as short-range wireless communication, security, and growth. The presentation also covers Bluetooth applications, how devices connect and communicate via Bluetooth, advantages and disadvantages, and examples of Bluetooth-enabled devices. Zigbee technology is then introduced as a standard for low data rate wireless devices with long battery life that is well-suited for home and building automation.
053744r00 Zb Mwg 2005 09 11 Zig Bee Alliance Tutorial
The document discusses ZigBee, a wireless technology standard focused on low-power wireless networks. It provides an overview of ZigBee capabilities including its ability to form large mesh networks of thousands of devices with long battery life. Applications discussed include home automation, industrial controls, and asset tracking where ZigBee's low-power and low-cost features are beneficial. The ZigBee Alliance aims to promote interoperability through standardization and certification.
Zigbee abstract
Zigbee is a low power wireless technology standard developed as a specification based on the IEEE 802.15.4 standard. It was accepted by the Zigbee Alliance, a consortium of over 300 companies, in 2004. Zigbee devices can transmit data over longer distances by passing data through a mesh network of intermediate devices to reach more distant ones without a centralized controller. The technology is intended to be simpler and less expensive than other wireless standards like Bluetooth.
Wibree ppt
The document discusses Wibree, a wireless technology introduced by Nokia that allows for connectivity between mobile devices/PCs and small battery-powered devices. Wibree uses very low power (10x less than Bluetooth) and is optimized for applications requiring years of battery life on small batteries. It operates at 2.4GHz, supports star and star-bus network topologies, and will be implemented via standalone Wibree chips or chips with dual Wibree/Bluetooth functionality. Potential applications include wireless keyboards, toys, health/fitness sensors, and other small devices.
Zigbee technology ppt edited
ZigBee is a wireless networking standard focused on low-cost, low-power consumption devices for monitoring and control applications. It uses the IEEE 802.15.4 standard for the physical and MAC layers and provides data rates from 20-250kbps depending on frequency band. ZigBee networks can support hundreds of devices with flexible star, peer-to-peer, or cluster tree topologies and address devices using short or IEEE addresses. The technology is well-suited for wireless control in industrial, commercial, and home automation applications where low data rates and power usage are priorities.
Zigbee ppt
Zigbee is a specification for a suite of high-level communication protocols used to create personal area networks from small, low-power digital radios. It operates on the IEEE 802.15.4 standard and provides data rates of 250 kbps, 40 kbps, and 20 kbps in different frequency bands. Zigbee devices can transmit data over long distances by passing through a mesh network and has a range of 10-100 meters. The technology targets applications requiring low data transfer rates and long battery life and is often used in industrial automation and home automation through devices like door locks and security sensors.
More Related Content
What's hot
zigbee communication
Zigbee is an IEEE 802.15.4-based specification for creating personal area networks with small, low-power, low-cost wireless connections designed for Internet of Things and machine-to-machine applications. It was created by the Zigbee Alliance, which includes members like Philips, Motorola, Intel and HP. Zigbee supports low data rate transmissions, star or peer-to-peer network topologies, hundreds of devices per network, and low power consumption, making it well-suited for wireless sensor and control applications that don't require high data rates but do need low cost and low power usage.
Zigbee technology ppt
A wireless technological device which is popular for extremely low power, and low bit rate wireless PAN technology called “zigBee”.
Zigbee technology
This document provides an overview of ZigBee wireless communication technology. It discusses the ZigBee protocol which is based on the IEEE 802.15.4 standard and adds network construction, security, and application services. The ZigBee Alliance develops the ZigBee specification and promotes its adoption. ZigBee is designed for low data rate, long battery life applications like home automation, lighting control, and sensor networks. It supports star, tree, and mesh network topologies operating in the 2.4GHz band with data rates up to 250kbps. The document outlines the physical, MAC and network layers of ZigBee and discusses security, topologies, and applications of the protocol.
Zigbee technology [autosaved]
This seminar report provides an overview of ZigBee technology. It defines ZigBee as a wireless networking standard intended for low-power devices. The report outlines ZigBee's key characteristics including low cost, low power consumption, mesh networking topology, and built-in security. It also describes ZigBee's protocol stack and compares it to other wireless technologies like Bluetooth and Wi-Fi. Common applications of ZigBee technology include home automation, wireless sensor networks, and industrial control.
Smart home solution
For inquiry: srvice@zugonow.com
Visit Zugo: http://www.zugonow.com/
Our smart home system not only secures your property, but it also provides a comfortable living environment. The application covers House, Hotel, Office, Retails, and Agriculture. In addition, we provide 3 Years Warranty for all surveillance system and ZigBee Smart House solution!
Wireless standards
This document provides an overview of Bluetooth and Zigbee wireless technologies. It discusses Bluetooth standards, classes, software, and applications. Bluetooth was developed in 1994 and operates at 2.45GHz using frequency hopping. Zigbee was created for low-power wireless sensor and control networks. It has a layered architecture based on the IEEE 802.15.4 standard and supports three device types: coordinator, full function device, and reduced function device. The document compares Zigbee to Bluetooth and other wireless protocols, outlines Zigbee characteristics and applications, and concludes that Zigbee will likely be the basis for future home networking solutions.
Zigbee - Building Smart Homes
Using IEEE's Zigbee Protocol to design a low power, noise efficient node for home automation. The presentation provides some of the key ingredients and working modes for the Zigbee Protocol. Many companies like (DiGi) built smart zigbee radios (commercially named: XBee) based on these protocol stacks, which now help reshaping wireless sensor networking and low power consumer electronics integration .
Zigbee wireless control made easy
The document discusses ZigBee, a wireless technology standard for low-power wireless networks. ZigBee targets monitoring and control applications with low data rates and infrequent data transmissions from sensors and controllers. It operates on the IEEE 802.15.4 standard and forms mesh networks for reliability and range. The ZigBee Alliance has over 150 member companies working to enable interoperable, low-cost products based on the ZigBee standard across various market applications including home automation, lighting, HVAC, security, and industrial control.
Smart home solution
tiPO Global Corp provides smart home solutions using ZigBee wireless networking technology. Their solution includes various sensors that can monitor a home for intrusion, fires, gas leaks, temperature and more. The sensors communicate wirelessly over ZigBee networks that can support up to 65,000 nodes within a 300 meter diameter. The sensors send data to a gateway and app to allow for remote monitoring and control of the smart home system from a smartphone. tiPO also offers similar agricultural monitoring systems for greenhouses.
Updated ZigBee .ppt
Debjeet Chakroborty presented a technical seminar on Zigbee technology under the guidance of Dr. Umashankar Ghugar. The presentation covered the introduction of Zigbee including its architecture, types of devices, network topologies, advantages, disadvantages, characteristics, applications, and conclusion. Zigbee is a wireless standard designed for low-power networks that allows devices to communicate with each other within short distances. The presentation discussed Zigbee's six-layer architecture, three device types, common network topologies like star, mesh and cluster-tree, and applications in home networking, industrial control, and medical data collection.
Zigbee ppt
ZigBee is a wireless networking standard used for control and sensor applications that requires low data rates, low power consumption, and secure networking. It is based on the IEEE 802.15.4 standard and allows for up to 65,000 nodes to connect in a mesh network topology. ZigBee operates in the 2.4GHz, 868MHz, and 915MHz frequency bands and is designed for use in personal area networks for applications like home automation, lighting control, and wireless sensor networks. Research is ongoing to expand ZigBee's uses in fields like wireless communications and neuroengineering.
Zig bee
This document discusses the wireless communication technology Zigbee. It begins by defining Zigbee as a technological standard created for control and sensor networks, based on the IEEE 802.15.4 standard. It then contrasts Zigbee with other wireless technologies like WiFi and Bluetooth by noting that Zigbee is designed for low data rates and power consumption, and controlling physical devices. The document outlines Zigbee's architecture including coordinator, router, and end device roles. It provides examples of Zigbee applications in building automation, industrial control, home automation, and more.
ZigBee Technology
ZigBee is an IEEE 802.15.4-based specification for personal area networks that uses low power wireless transmissions between devices. It was standardized in 2003 and revised in 2006. ZigBee networks can support up to 65,000 nodes and consume very low amounts of battery power. Common applications of ZigBee include wireless sensor networks, home automation and control, and medical data collection.
Introduction to Ti wireless solution: ZigBee
Represent Texas Instrument to design the syllabus and conduct a 3 hours workshop for Republic Polytechnic on ZigBee and MSP430 in Singapore.
The Differences of between ZigBee and Bluetooth technologies
ZigBee and Bluetooth are wireless network technologies but they have key differences. ZigBee is intended for low data rate, long battery life applications like sensor networks and home automation. It has a range of 10-100m, very low power consumption, supports large networks, and a long battery life. Bluetooth is intended for cable replacement between devices like phones, laptops, and headsets within 10m. It has higher data rates but also higher power consumption and shorter battery life than ZigBee.
Blutooth vs zigbee
This presentation introduces Bluetooth technology. It is comprised of four group members and discusses Bluetooth's features such as short-range wireless communication, security, and growth. The presentation also covers Bluetooth applications, how devices connect and communicate via Bluetooth, advantages and disadvantages, and examples of Bluetooth-enabled devices. Zigbee technology is then introduced as a standard for low data rate wireless devices with long battery life that is well-suited for home and building automation.
053744r00 Zb Mwg 2005 09 11 Zig Bee Alliance Tutorial
The document discusses ZigBee, a wireless technology standard focused on low-power wireless networks. It provides an overview of ZigBee capabilities including its ability to form large mesh networks of thousands of devices with long battery life. Applications discussed include home automation, industrial controls, and asset tracking where ZigBee's low-power and low-cost features are beneficial. The ZigBee Alliance aims to promote interoperability through standardization and certification.
Zigbee abstract
Zigbee is a low power wireless technology standard developed as a specification based on the IEEE 802.15.4 standard. It was accepted by the Zigbee Alliance, a consortium of over 300 companies, in 2004. Zigbee devices can transmit data over longer distances by passing data through a mesh network of intermediate devices to reach more distant ones without a centralized controller. The technology is intended to be simpler and less expensive than other wireless standards like Bluetooth.
Wibree ppt
The document discusses Wibree, a wireless technology introduced by Nokia that allows for connectivity between mobile devices/PCs and small battery-powered devices. Wibree uses very low power (10x less than Bluetooth) and is optimized for applications requiring years of battery life on small batteries. It operates at 2.4GHz, supports star and star-bus network topologies, and will be implemented via standalone Wibree chips or chips with dual Wibree/Bluetooth functionality. Potential applications include wireless keyboards, toys, health/fitness sensors, and other small devices.
What's hot (20)
The Differences of between ZigBee and Bluetooth technologies
The Differences of between ZigBee and Bluetooth technologies
053744r00 Zb Mwg 2005 09 11 Zig Bee Alliance Tutorial
053744r00 Zb Mwg 2005 09 11 Zig Bee Alliance Tutorial
Atm11 home automation design using low pan wireless sensor networks
Atm11 home automation design using low pan wireless sensor networks
Similar to Zig Bee
Zigbee technology ppt edited
ZigBee is a wireless networking standard focused on low-cost, low-power consumption devices for monitoring and control applications. It uses the IEEE 802.15.4 standard for the physical and MAC layers and provides data rates from 20-250kbps depending on frequency band. ZigBee networks can support hundreds of devices with flexible star, peer-to-peer, or cluster tree topologies and address devices using short or IEEE addresses. The technology is well-suited for wireless control in industrial, commercial, and home automation applications where low data rates and power usage are priorities.
Zigbee ppt
Zigbee is a specification for a suite of high-level communication protocols used to create personal area networks from small, low-power digital radios. It operates on the IEEE 802.15.4 standard and provides data rates of 250 kbps, 40 kbps, and 20 kbps in different frequency bands. Zigbee devices can transmit data over long distances by passing through a mesh network and has a range of 10-100 meters. The technology targets applications requiring low data transfer rates and long battery life and is often used in industrial automation and home automation through devices like door locks and security sensors.
Dccn ppt
The document presents information on Zigbee wireless technology. Zigbee is a low-cost, low-power wireless mesh networking standard used for sensor and control networks. It operates in the 2.4GHz band and supports data rates of up to 250kbps. Zigbee networks consist of end devices, routers, and a coordinator that forms the network tree and acts as the trust center. Zigbee is well-suited for applications like home automation, wireless sensor networks, and industrial control.
Zig Bee
The document provides an overview of the ZigBee wireless protocol. It discusses that ZigBee is a low power, low cost wireless standard targeted for automation and remote control applications. It then covers ZigBee features such as mesh networking, security, reliability and interoperability. The document also summarizes the ZigBee protocol stack including the physical, MAC and network layers and different device types in ZigBee networks.
Techincal Seminar.pptx
The document provides an overview of Zigbee technology. It discusses that Zigbee is a wireless technology standard developed for low-cost, low-power networks including machine-to-machine and internet of things applications. The document outlines the history of Zigbee's development, describes the different device types in Zigbee networks, and explains how Zigbee networks function in terms of topology, protocol layers, and device roles. It also reviews the advantages of Zigbee such as low data rates and power consumption as well as future projections for widespread adoption in home automation and other applications.
ZigBee Technology
The document introduces ZigBee, a wireless technology standard used for sensor and control networks. ZigBee offers low-cost, low-power wireless connectivity for devices. It uses the IEEE 802.15.4 standard and is intended for applications that require long battery life and secure networking. ZigBee supports mesh networking and can connect thousands of devices together over distances of up to 100 meters. Common applications of ZigBee include wireless light switches, HVAC controls, and other smart home and industrial IoT uses.
Tech sem on zig 1
ZigBee is a wireless technology designed for low-power, short-range communication in personal area networks. It operates on various frequency bands and defines communication protocols for sensor and control networks. The document discusses ZigBee's architecture, protocol stack, topologies, algorithms, applications and compares it to other wireless technologies like Bluetooth. It also covers ZigBee's advantages like low power usage, large network capacity and ease of deployment as well as limitations such as low data rates and shorter ranges.
Zigbee technology
ZigBee is a wireless technology designed for low-power, short-range communication in personal area networks. It operates on various frequency bands globally. The document discusses ZigBee technology, including its architecture, protocol stack, topologies, algorithms, applications, and future scope. ZigBee aims to provide a low-cost, low-power wireless solution for monitoring and control applications.
Tech sem on zig 1
ZigBee is a wireless technology designed for low-power, short-range communication in personal area networks. It operates on various frequency bands and defines communication protocols for sensor and control networks. The document discusses ZigBee's architecture, protocols, topologies, algorithms and applications in monitoring and control. It compares ZigBee to other wireless standards like Bluetooth and outlines its advantages like low power usage, large network capacity and ease of deployment.
Zigbee Technology
Technological Standard Created for Control and Sensor Networks
Based on the IEEE 802.15.4 Standard
High level Communication
Operates in Wireless Personal Area Networks (WPANs) and
Device-to-Device networks
Home networking with zig bee
This document outlines ZigBee technology. It is created for low-power wireless sensor and control networks based on the IEEE 802.15.4 standard. ZigBee can connect over 65,000 devices for applications like home automation with lighting, HVAC, and security controls. It operates on various frequencies with data rates up to 250kbps and ranges from 10-100 meters. ZigBee networks use star, mesh, and tree topologies and provide long battery life, security, and reliability for uses in homes, buildings, and industrial settings.
Zig Bee
ZigBee is a wireless networking standard intended for low-power devices. It is based on the IEEE 802.15.4 standard and uses small, low-power digital radios to transmit data over short distances. ZigBee networks are self-organizing and reliable, with many possible applications including home automation, industrial control, and consumer electronics. The ZigBee Alliance promotes the standard and ensures interoperability between devices from different manufacturers.
ZIG BEE PRESENTATION..pptx
This document provides an overview of Zigbee wireless technology. It discusses that Zigbee is an open global standard for wireless personal area networks designed for low data rate, low power consumption applications. It then covers the objectives, literature survey, how Zigbee works including topology, layers and block diagram. The advantages are listed as long battery life, remote management capabilities. Limitations include lack of security and cost of replacement. Applications discussed are home automation, wireless sensor networks, industrial control and medical data collection. The conclusion states there is increasing demand for Zigbee applications and it provides low power specifications for wireless devices.
zigbee technology
Zigbee is a wireless technology standard used for sensor and control networks. It operates on the IEEE 802.15.4 standard using mesh networking topologies to transmit data over long distances with low power consumption. Zigbee networks consist of coordinator, router, and end devices and are used in applications that require long battery life, security, low data rates and cost such as lighting, HVAC and sensors. Research continues to expand Zigbee's capabilities for use in more devices and markets going forward.
Zigbee
Zigbee is a wireless communication standard used for home automation and industrial applications. It allows for low-cost, low-power wireless mesh networks that can connect various electronics like lighting, HVAC, sensors and more. There are three device types in Zigbee - coordinators, routers and end devices. Zigbee uses star, tree and mesh topologies to connect devices in a network. It operates in the 2.4GHz band and uses low power for long battery life, making it suitable for wireless control and sensor applications. Zigbee is expected to be widely used for home automation, smart metering and smart grid applications in the future.
CSE-Zigbee-ppt.pptx
This document provides an overview of zigbee technology. It discusses the history and introduction of zigbee, the different device types in a zigbee network including coordinators, routers, and end devices. It describes how zigbee works using different topologies like star, tree, and mesh. It discusses the layers of zigbee including the physical, MAC, and network/application support layers. Examples are given of uses in home automation, smart metering, and smart grids. The conclusion states that zigbee is well-suited for low data rate, low power wireless applications and will continue growing in the future for uses in homes and industries.
Zigbee- The Future of Data Communications
Zigbee is a technological standard designed for control and sensor networks based on IEEE 802.15.4. The standard is developed and promoted by the Zigbee Alliance.
ZigBee technology.pptx
ZigBee is a wireless networking technology built on the IEEE 802.15.4 standard designed for low-power wireless networks. It was created to satisfy the need for an inexpensive, low-power, reliable, and secure wireless standard for monitoring and control applications. The ZigBee Alliance develops the ZigBee standard and its applications. ZigBee operates on three frequency bands and uses CSMA-CA to reduce interference. There are three device types - coordinator, router, and end device. ZigBee supports star, mesh, and peer-to-peer topologies and is well-suited for wireless sensor networks due to its low power consumption.
Lecture 15
- Zigbee is a wireless mesh networking standard used for low-power wireless personal area networks. It operates on the IEEE 802.15.4 standard and defines the higher layers for reliable transmission of data between devices.
- 6LoWPAN is an adaptation layer that allows IPv6 packets to be sent over IEEE 802.15.4 low-power wireless networks. It provides compression mechanisms to encapsulate IPv6 datagrams into frames compatible with the IEEE 802.15.4 standard.
- Both Zigbee and 6LoWPAN are commonly used in wireless sensor networks and Internet of Things applications where many devices need to communicate wirelessly over short distances with low power consumption. However, Z
WEBINAR - ZIGBEE
The document introduces the SPZB32W series of IEEE 802.15.4 RF modules based on the STM32W platform. It discusses key technologies such as IEEE 802.15.4 and target application domains including smart energy, home automation, healthcare, and industrial. The presentation outlines the product portfolio and roadmap. It highlights competitive advantages of the modules such as off-the-shelf solutions and advanced design. Software libraries and the STM32W chipset are also overviewed along with module certifications and reference boards.
Similar to Zig Bee (20)
More from W3Edify
class gd.pptx
Group discussions assess students' personalities through discussions on various topics. A group discussion involves 8-12 members freely expressing their views on a topic within 20-30 minutes, while their abilities are measured. Good body language like keeping one's back straight and hands in their lap indicates being logical and not needing hand props. Effective group discussion requires preparation, knowledge, communication skills, presentation skills, and remaining calm. Benefits include expanding knowledge and revealing leadership qualities. Participants should make original, logical points and listen actively, while avoiding interrupting others or changing opinions stubbornly. Accepting criticism politely and showing leadership are important.
P.maria sheeba 15 mco010
This document discusses image segmentation techniques for hyperspectral images. It first defines image segmentation as extracting particular regions from images, and lists common segmentation methods like edge detection, contour extraction, and clustering. The objective is then stated as improving noise-free estimation for noisy hyperspectral images by fully utilizing correlated spectral information and providing rich spectral-spatial information. Finally, the document surveys several papers on hyperspectral image denoising and restoration, discussing their purposes, methodologies, and limitations.
Symposium
This document presents a system for detecting LPG gas leaks using sensors and the Internet of Things. The system uses a gas sensor to detect leaks and notifies officials. It also monitors human presence using a PIR sensor and light levels using an LDR sensor. If a leak is detected, an alarm is activated and officials are notified through an IoT server, mobile app, and web browser. The system aims to automate safety monitoring and prevent disasters from gas leaks.
Unit 1
This document discusses key concepts related to three-phase electrical circuits and power measurement. It begins by outlining the objectives and outcomes of the course, which are to analyze three-phase circuits, understand electrical machines, and choose appropriate measuring instruments. The document then covers topics such as the advantages of three-phase power systems, generation of three-phase voltages, phase sequences, balanced and unbalanced loads, power equations for star and delta connections, and star-delta conversions. Diagrams are provided to illustrate three-phase waveforms, voltage and current relationships in star and delta configurations, and power calculations.
Beie unit - 5
This document provides information about basic electrical and instrumentation engineering. It discusses measurement systems and their components. It describes static characteristics such as accuracy, precision, tolerance, range, bias, linearity, sensitivity, dead space, resolution, and threshold. Dynamic characteristics like response time are also covered. Types of errors in measurements like gross errors, systematic errors, and random errors are defined. Transducers that convert one form of energy to another are explained, including variable resistive transducers like strain gauges, thermistors, and RTDs. Their applications are also summarized.
Unit 4
This document provides information about an electrical engineering course on basic electrical and instrumentation engineering taught in the even semester of 2017-2018 at Mount Zion College of Engineering and Technology in Puddukkottai, India. It includes an overview and introduction to three-phase induction motors, discussing their construction, principle of operation, rotating magnetic field, and equivalent circuit. Diagrams illustrate motor components like the stator, squirrel cage and wound rotors. The document also covers topics like motor speed, efficiency, torque equation, and provides an introduction to single phase induction motors.
Beie unit 2
1) A transformer consists of a primary coil and secondary coil wound on an iron core. It works on the principle of mutual induction to change alternating current at one voltage level to another.
2) Key parts include the laminated iron core and coils, with different winding configurations depending on the type. Transformers can be classified by number of phases, windings or voltage levels.
3) Transformer tests include open circuit and short circuit tests to determine parameters of the equivalent circuit model, including resistances, reactances and losses. These characterize transformer performance metrics like regulation and efficiency.
2.9
The document discusses transformer efficiency. It defines transformer efficiency as the ratio of power output to power input. Transformer efficiency can be calculated using copper and core losses. The condition for maximum efficiency is when copper loss equals core loss. All-day efficiency is always less than commercial efficiency due to factors like heating. Autotransformers are also discussed, which have a single winding used for both the primary and secondary sides. Autotransformers have advantages like higher efficiency, smaller size, better voltage regulation, and lower cost compared to conventional transformers.
2.5
The document discusses per unit calculations for transformers in power systems. It explains that per unit analysis normalizes all variables to avoid having to continually refer impedances to different sides of transformers. The key steps are: (1) selecting a base VA and voltage base for each level; (2) calculating the impedance and current bases; and (3) converting actual values to per unit by dividing by the appropriate base values. This allows impedances and voltages to be treated identically on either side of transformers and for components' values to fall within consistent ranges regardless of ratings.
2.4 & 2.7
The document discusses the circuit model and testing of transformers. It can be summarized as:
1. A transformer's performance can be modeled using an equivalent circuit with parameters like resistance, reactance, magnetizing susceptance, and core loss conductance, which can be determined through open circuit and short circuit tests.
2. Open circuit testing involves applying voltage to the primary winding with the secondary open, measuring no load current and loss. Short circuit testing applies low voltage to the primary with the secondary shorted, measuring full load copper loss and impedance.
3. Transformer losses include core losses from hysteresis and copper losses from I^2R heating in the windings. Regulation compares the output voltage under no
2.3, 2.8, 2.10, 2.11
The document discusses the construction, working principle, and advantages of 3-phase transformers over single-phase transformers. 3-phase transformers have three cores arranged 120 degrees apart with primary windings on each core connected to the 3-phase power supply. This allows for more efficient power transmission with less space, weight, and cost compared to single-phase transformers. Connections like star-star, delta-delta, star-delta, and delta-star can adjust voltages by raising or lowering them. Transformers can be connected in parallel for increased reliability and capacity. Losses from copper, eddy currents, hysteresis, and leakage fluxes must be accounted for in accurate transformer models.
2.2
This document discusses the classification and components of transformers. Transformers can be classified by the number of windings (conventional, autotransformer, multi-winding), number of phases (single or three-phase), and voltage level (step-up or step-down). The key components are the core, which is made of laminated steel, and the windings, which can be shell, core, or sandwich type. Transformers work on the principle of mutual induction to transmit power by increasing or decreasing voltages.
2.1
A transformer is a device that changes alternating current (AC) electric power from one voltage level to another. It consists of two coils wound around an iron core, and works through electromagnetic induction. Transformers are necessary in power systems to increase voltage for efficient long-distance transmission, and then decrease voltage for safe distribution and usage. They allow power to be transmitted at high voltages to reduce transmission losses, then stepped down for domestic and industrial use.
Beie unit-3
This document provides information about basic electrical and instrumentation engineering. It discusses Faraday's law of electromagnetic induction, which states that a changing magnetic field induces an electromotive force (emf) in a conductor. It also discusses Lenz's law, which describes the direction of induced current. The document then covers three-phase circuits, DC machines including their construction and operation principles, and DC motors including their characteristics and speed control methods.
3.1,3.2,3.3
The document discusses DC machines and their components and operating principles. It describes Maxwell's corkscrew rule and Fleming's left-hand and right-hand rules for determining the direction of magnetic fields. It also explains Lenz's law governing induced electromotive force (emf). The key components of a DC generator are conductors, magnetic field, and a mechanical power source. It converts mechanical energy to electrical energy via electromagnetic induction. A DC motor operates on the same principles in reverse, using a current to generate motion.
Transformer introduction
A transformer consists of two coils wound around an iron core. Changing current in the primary coil induces a changing magnetic field that induces an alternating voltage in the secondary coil. This allows a transformer to change AC electric power to a different voltage level through electromagnetic induction without changing frequency. The transformer transfers power between circuits by mutual induction of the two coils linked by the core.
Three phase transformers
Three-phase transformers are used for power generation and transmission because they are more efficient and cost-effective than single-phase transformers. They have three cores arranged 120 degrees apart that operate on the principle that the fluxes in each core sum to zero at any given time. Various winding configurations like star-star, delta-delta, star-delta, and delta-star can step voltages up or down as needed. For high loads, three-phase transformers can be connected in parallel as long as their polarities match, phase displacements are aligned, and voltage ratios are equal to prevent circulating currents.
Transformer ratio & equivalent circuit of transformer
This document discusses transformer ratios and the equivalent circuit of a transformer. It begins by defining the voltage, current, and volt-amp ratios of a transformer. It then presents the equivalent circuit of a transformer, including the leakage reactance and magnetizing branches. It also covers transferring the parameters of the equivalent circuit between the primary and secondary sides.
Ideal transformer
- The document discusses the ideal transformer model and equations for calculating induced voltages. It assumes zero leakage flux, windings with no resistance, an infinitely permeable core with negligible magnetizing current, and a lossless core with no hysteresis or eddy currents.
- Equations shown for the induced voltages E1 and E2 in the primary and secondary windings respectively, with E1/N1 = E2/N2 = 4.44fφm, where f is the frequency, N1 and N2 are the number of turns, and φm is the maximum magnetic flux in the core.
- The derivation considers the average and RMS rates of change of the sinusoidally varying flux to determine
1.11 power factor improvement
The document discusses power factor correction (PFC) methods. It explains that reactive power sustains electromagnetic fields while active power performs work. A low power factor is expensive and inefficient for utilities. Power factor is the ratio of active to apparent power. PFC can be achieved through capacitors that compensate for inductive loads, reducing the burden on supplies. Benefits of PFC include reduced electricity charges, elimination of utility penalties, reduced equipment losses and heat, and prolonged equipment life.
More from W3Edify (20)
Transformer ratio & equivalent circuit of transformer
Transformer ratio & equivalent circuit of transformer
Recently uploaded
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Recently uploaded (20)
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Data Control Language.pptx Data Control Language.pptx
Data Control Language.pptx Data Control Language.pptx
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Zig Bee
- 1. P. MARIA SHEEBA II ME COMMUNICATION SYSTEM
- 2. Named for erratic, zig-zagging patterns of bees between flowers Symbolizes communication between nodes in a mesh network Network components analogous to queen bee, drones, worker bees THE ZIGBEE NAME
- 3. Technological Standard Created for Control and Sensor Networks Based on the IEEE 802.15.4 Standard Created by the ZigBee Alliance wireless personal area networking (WPAN) i.e, digital radio connections between computers and related devices. standardized protocol for Ultra Low Power Wireless Personal Area Networks WHAT IS ZIGBEE?
- 4. Based On IEEE 802.15.4 standard that defines the PHY and Mac Layers for ZigBee. Low in cost,complexity & power consumption as compared to competing technologies. Data rates touch 250Kbps for 2.45Ghz ,40 Kbps 915Mhz and 20Kbps for 868Mhz band. ZigBee is a Ad-hoc networking technology for WPAN. INTRODUCTION
- 5. No wireless network standard that meets the unique needs of sensors and control devices. wireless systems don’t require high data rates but do require low cost and very low current drain. proprietary systems are creating significant interoperability problems with each other and with newer technologies WHY ZIGBEE IS NEEDED?
- 6. For low data rates Low power consumption Inexpensive Small packet networks Home Entertainment and Control Wireless sensor network’s ZIGBEE USES
- 7. HOME AUTOMATION APPLICATION SECTORS ZigBee LOW DATA-RATE RADIO DEVICES CONSUMER ELECTRONICS TV VCR DVD/CD remote PC & PERIPHERALS consoles portables educational PERSONAL HEALTH CARE INDUSTRIAL & COMMERCIAL monitors sensors automation control security HVAC lighting closures
- 8. Zigbee coordinator Zigbee router Zigbee end devices DEVICE TYPES
- 13. Data rates of 20 kbps and up to 250 kbps Star or Peer-to-Peer network topologies Support for Low Latency Devices Handshaking Low Power Usage consumption 3 Frequencies bands with 27 channels Extremely low duty-cycle (<0.1%) ZIGBEE GENERAL CHARACTERISTICS
- 14. ZIGBEE’S PRESENT
- 15. COMPARISON OF ZIGBEE WITH OTHERS
- 16. ZIGBEE - BLUETOOTH - PLC COMPARISON ZigBee Bluetooth PLC Cost (BOM) $5 $10 $15-$40 Power yea rs hours N/ A Da ta Ra te 250Kb p s 720Kb p s 3/ 10 Mb p s Comp lexity Low Med ium High Density 255 + 7 20-250 Interop Yes Yes No Ea se of Use Simp le Mod era te Restric tive La tenc y 15ms >3s <15ms Interferenc e Low High High Sec urity High High Low
- 17. ZIGBEE CC2500
- 18. COMPARISON TABLE OF 1G TO 5G