COMPARATIVE ANALYSIS OF THE PROCESSES FOR MACHINING OF MOLD ELEMENT WITH USIN...IAEME Publication
In the present article has been proposed route for design of mold element with using TopSolid, and developed comparative analysis of the technological processes for machining of element of a mold with using TopSolid'CAM and ESPRIT, as covering all basic operations for 3-axis machining of design surfaces. Experimental studies are realized on a machining center DMG MORI NVX 5060. The results are illustrated in tabular and graphical form.
3D printing is any of various processes in which material is joined or solidified under computer control to create a three-dimensional object ,with material being added together (such as liquid molecules or powder grains being fused together), typically layer by layer. In the 1990s, 3D printing techniques were considered suitable only for the production of functional or aesthetical prototypes and a more appropriate term was rapid prototyping
Three-dimensional (3D) printing is an additive manufacturing process that creates a physical object from a digital design. The process works by laying down thin layers of material in the form of liquid or powdered plastic, metal or cement, and then fusing the layers together.
COMPARATIVE ANALYSIS OF THE PROCESSES FOR MACHINING OF MOLD ELEMENT WITH USIN...IAEME Publication
In the present article has been proposed route for design of mold element with using TopSolid, and developed comparative analysis of the technological processes for machining of element of a mold with using TopSolid'CAM and ESPRIT, as covering all basic operations for 3-axis machining of design surfaces. Experimental studies are realized on a machining center DMG MORI NVX 5060. The results are illustrated in tabular and graphical form.
3D printing is any of various processes in which material is joined or solidified under computer control to create a three-dimensional object ,with material being added together (such as liquid molecules or powder grains being fused together), typically layer by layer. In the 1990s, 3D printing techniques were considered suitable only for the production of functional or aesthetical prototypes and a more appropriate term was rapid prototyping
Three-dimensional (3D) printing is an additive manufacturing process that creates a physical object from a digital design. The process works by laying down thin layers of material in the form of liquid or powdered plastic, metal or cement, and then fusing the layers together.
Introduction, Conventional and Revised with CAD/CAM Product cycle, Application of computers to the design process, comparison of capabilities of designers and computers, Reasons for implementing CAD, Benefits of CAD, CAD workstation,
CAD/CAM/CIM (18ME72) Module-5 Part-A as per VTU
Additive Manufacturing Systems: Basic principles of additive manufacturing, slicing CAD models for AM, advantages and limitations of AM technologies, Additive manufacturing processes: Photo polymerization, material jetting, binder jetting, material extrusion, Powder bed sintering techniques, sheet lamination, direct energy deposition techniques, applications of AM.
Introduction, Conventional and Revised with CAD/CAM Product cycle, Application of computers to the design process, comparison of capabilities of designers and computers, Reasons for implementing CAD, Benefits of CAD, CAD workstation,
CAD/CAM/CIM (18ME72) Module-5 Part-A as per VTU
Additive Manufacturing Systems: Basic principles of additive manufacturing, slicing CAD models for AM, advantages and limitations of AM technologies, Additive manufacturing processes: Photo polymerization, material jetting, binder jetting, material extrusion, Powder bed sintering techniques, sheet lamination, direct energy deposition techniques, applications of AM.
Manufacturing of rapid prototypes of mechanical parts using reverse engineeri...Barhm Mohamad
This article focuses on the design and manufacture of mechanical parts that have complicated shapes using the technique of reverse design using a scanner or an MMT for data acquisition in the form of a point cloud, using CAD software (CATIA). The digital model created is used for a virtual representation of the final product. Then we get the physical model on a 3D printer (also called additive manufacturing process) for later use in sand moulds. To have the imprint in the sand mould, we go through the fusion of the physical model (part). The use of this technique in the industry, allows us to save a lot of time in terms of model preparation and simple to implement, especially if it is mechanical parts that do not have a definition drawing, or they are worn out, then structural analysis was applied on the model using FE based software and tools to prove the quality of the product. Von Mises equivalent strains and stresses were predicted and decreased with increasing areas and honeycomb thickness. The objective of this article is to give an overview of this relatively modern technology and its various applications.
COMPARATIVE ANALYSIS OF THE PROCESSES FOR MACHINING OF MOLD ELEMENT WITH USIN...IAEME Publication
In the present article has been proposed route for design of mold element with using TopSolid, and developed comparative analysis of the technological processes for machining of element of a mold with using TopSolid'CAM and ESPRIT, as covering all basic operations for 3-axis machining of design surfaces. Experimental studies are realized on a machining center DMG MORI NVX 5060. The results are illustrated in tabular and graphical form.
computer-aided design and computer-aided manufacturing) refers to computer software that is used to both design and manufacture products. ... CAD/CAM applications are used to both design a product and program manufacturing processes, specifically, CNC machining.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Wit and wil digital fabrication-additive manufacturing
1.
2. WIT and WIL
Subject: Digital Fabrication
Department of Mechanical Engineering
Subject Code: 5ME71, III Year B.Tech I Semester
Additive Manufacturing
I will make a
cup
It refers to processes used to create a three-dimensional object in which
layers of material are formed under computer control to create an object.
CNC Machining
Computer numerical control (CNC) is the automation of machine tools by
means of computers executing pre-programmed sequences of
machine control commands.
7. Post Processing
1. Support Material Removal
2. Surface Texture Improvements
3. Accuracy Improvements
4. Aesthetic Improvements
5. Preparation for use as a Pattern
6. Property Enhancements using Non-Thermal Techniques
7. Property Enhancements using Thermal Techniques