If you want to know about Concrete Wall System, then visit our website. We provide information about the concrete wall system and also provide you the best concrete wall system. For more information visit http://www.dincel.com.au/
This document discusses Industrialized Building System (IBS) and HC Precast System. It notes that IBS aims to speed up construction and decrease dependence on heavy site work. However, some precast manufacturers only use limited precast elements like beams and columns, still requiring significant brick wall assembly. HC Precast System provides a complete precast building system with load-bearing walls, beams, and stairs that minimizes on-site work. It can produce wall panels with any openings needed without relying on conventional brick walls.
This document provides an overview of Industrialized Building Systems (IBS) with a focus on precast concrete systems. It defines IBS and discusses the key types, including precast concrete, steel framing, formwork, blockwork, timber framing, and innovative systems. The advantages of IBS are faster construction, higher quality, and lower cost. Potential defects in precast concrete like water leakage and cracking are also outlined. The document presents the standard design and construction workflows for IBS and provides case studies of two apartment buildings in Singapore that utilized precast concrete systems.
ONE OF THE WAY TO IMPROVE THE OUTFLOW OF CURRENCY IS THE UTILIZATION OF INDUSTRIAL BUILDING SYSTEM ( IBS ) :
- IBS is a system which suits all architectural demands. It is neither a machine nor component,
- IBS Superstructure In Malaysia 3in1 : HC PRECAST SYSTEM
- Load Bearing + Modular Shear Keys Wet Joint + Box System
This document provides information about an industrialized building system (IBS) course focusing on precast concrete. It includes sections on technical drawings, schedules of IBS components, construction details, and an introduction to IBS that discusses the history and types of IBS in Malaysia as well as advantages and disadvantages of precast concrete systems.
Rapid construction techniques used in now a days, modern construction techniques, LIGHT HOUSE PROJECTS, global housing technology challenge, ix Technology providers have been selected through rigorous online bidding process for construction of Light House Projects (LHPs) at six different locations in six states. ghtc india
This report summarizes an educational trip by Eraz Aqilah Binti Tajul Edrus to the CIDB Convention Centre to learn about Industrialized Building Systems (IBS). The trip included a presentation on IBS, visiting the IBS Component Gallery to see examples of IBS components like formwork systems, blockwork systems, and steel frame systems. They also toured the IBS Show House and labs at the Construction Research Institute of Malaysia (CREAM) which tests IBS components. The report discusses the purposes, advantages, manufacturing process, and types of IBS classified by structure, material, and relative component weight. It provides details on the testing equipment and applications at CREAM labs.
Steel and concrete modular construction is better suited than wood-framed modular for commercial and high-end residential buildings as it allows for larger openings, more flexible floor plans, fire resistance, and LEED certification. Modular units are constructed in a controlled factory setting using an assembly line process, then transported and assembled on-site, providing construction speed, cost savings, and faster occupancy compared to traditional on-site construction. Steel and concrete modular structures are more durable and rigid with longer lifespan than wood structures.
B.tech Project 1 - Industrialised Building SystemsCarmen Chan
The document discusses industrialized building systems (IBS) and provides a case study of Seri Jati Apartments in Setia Alam, Malaysia.
[1] It introduces IBS, including the main types used in Malaysia like precast concrete, blockwork, and steel framing systems, and discusses advantages like reduced costs and time as well as disadvantages like high initial costs.
[2] A case study of Seri Jati Apartments is presented, which utilized a precast concrete structural frame with in-situ concrete floors. Standard component sizes, construction processes, and drawings are shown.
[3] The architectural and structural drawings of the proposed IBS building are provided, along with
This document discusses Industrialized Building System (IBS) and HC Precast System. It notes that IBS aims to speed up construction and decrease dependence on heavy site work. However, some precast manufacturers only use limited precast elements like beams and columns, still requiring significant brick wall assembly. HC Precast System provides a complete precast building system with load-bearing walls, beams, and stairs that minimizes on-site work. It can produce wall panels with any openings needed without relying on conventional brick walls.
This document provides an overview of Industrialized Building Systems (IBS) with a focus on precast concrete systems. It defines IBS and discusses the key types, including precast concrete, steel framing, formwork, blockwork, timber framing, and innovative systems. The advantages of IBS are faster construction, higher quality, and lower cost. Potential defects in precast concrete like water leakage and cracking are also outlined. The document presents the standard design and construction workflows for IBS and provides case studies of two apartment buildings in Singapore that utilized precast concrete systems.
ONE OF THE WAY TO IMPROVE THE OUTFLOW OF CURRENCY IS THE UTILIZATION OF INDUSTRIAL BUILDING SYSTEM ( IBS ) :
- IBS is a system which suits all architectural demands. It is neither a machine nor component,
- IBS Superstructure In Malaysia 3in1 : HC PRECAST SYSTEM
- Load Bearing + Modular Shear Keys Wet Joint + Box System
This document provides information about an industrialized building system (IBS) course focusing on precast concrete. It includes sections on technical drawings, schedules of IBS components, construction details, and an introduction to IBS that discusses the history and types of IBS in Malaysia as well as advantages and disadvantages of precast concrete systems.
Rapid construction techniques used in now a days, modern construction techniques, LIGHT HOUSE PROJECTS, global housing technology challenge, ix Technology providers have been selected through rigorous online bidding process for construction of Light House Projects (LHPs) at six different locations in six states. ghtc india
This report summarizes an educational trip by Eraz Aqilah Binti Tajul Edrus to the CIDB Convention Centre to learn about Industrialized Building Systems (IBS). The trip included a presentation on IBS, visiting the IBS Component Gallery to see examples of IBS components like formwork systems, blockwork systems, and steel frame systems. They also toured the IBS Show House and labs at the Construction Research Institute of Malaysia (CREAM) which tests IBS components. The report discusses the purposes, advantages, manufacturing process, and types of IBS classified by structure, material, and relative component weight. It provides details on the testing equipment and applications at CREAM labs.
Steel and concrete modular construction is better suited than wood-framed modular for commercial and high-end residential buildings as it allows for larger openings, more flexible floor plans, fire resistance, and LEED certification. Modular units are constructed in a controlled factory setting using an assembly line process, then transported and assembled on-site, providing construction speed, cost savings, and faster occupancy compared to traditional on-site construction. Steel and concrete modular structures are more durable and rigid with longer lifespan than wood structures.
B.tech Project 1 - Industrialised Building SystemsCarmen Chan
The document discusses industrialized building systems (IBS) and provides a case study of Seri Jati Apartments in Setia Alam, Malaysia.
[1] It introduces IBS, including the main types used in Malaysia like precast concrete, blockwork, and steel framing systems, and discusses advantages like reduced costs and time as well as disadvantages like high initial costs.
[2] A case study of Seri Jati Apartments is presented, which utilized a precast concrete structural frame with in-situ concrete floors. Standard component sizes, construction processes, and drawings are shown.
[3] The architectural and structural drawings of the proposed IBS building are provided, along with
This document provides an analysis of facade and structural systems for the proposed Kajang Art Centre project in Malaysia. It examines two precedent studies for roof systems, including a metal cladding and steel frame roof; two facade systems, consisting of a double skin facade and folding perforated metal panels; and a steel frame structural system. For each precedent, the document outlines the key materials and construction details, and discusses advantages and disadvantages. It then presents two proposed facade design schemes for the front and rear elevations of the Kajang Art Centre. Sectional perspectives of the ground and top floors show additional construction details.
This document provides details about a factory visit assignment to Swissma Building Technologies Sdn. Bhd. and Sanko production sites by a group of quantity surveying students. It includes:
1) An introduction to Swissma's history and formation, services, and notable projects.
2) Descriptions of industrialized building system components produced by Swissma and Sanko, including standing seam roofing, metal tiles, and ribbed panels.
3) Explanations and photos of the installation processes for Swissma's Doppelwelt standing seam and Snapwelt roofing systems.
4) Overviews of the roll forming and crimping manufacturing processes used at Sanko's
Modular construction involves prefabricating building components off-site and transporting them to the construction location for assembly. This document discusses the benefits of modular construction compared to standard construction methods. Some key benefits include reduced construction costs through industrialized manufacturing, faster installation times, standardized components that improve productivity, and reusability of modular units that provide flexibility. The document also explains modular coordination, which involves dimensioning buildings and components using a standard module unit of 100mm to facilitate industrialized production and assembly of standardized building parts.
The document discusses Industrialized Building Systems (IBS) and proposes using several precast concrete systems - including precast columns, beams, slabs, walls, staircases and balconies - for a building project. It provides details on the manufacturing process for precast components and their advantages such as speed of construction, quality control and reduced maintenance costs. Connection methods are described for joining the various precast elements together on site.
Building Technology I : Project 1 : IBSJing Fan Koh
This document provides information on an Industrialized Building System (IBS) project involving blockwork components. It includes sections that describe the schedule of modular components, IBS score calculation, and conclusions. Diagrams and descriptions are provided on different types of IBS systems including blockwork systems. The fabrication process for blockwork components is outlined involving selection of ingredients, mixing, curing, cubing, and storing. Advantages and disadvantages of IBS construction are also discussed.
This document discusses industrialized building systems (IBS) and formwork systems used in construction. It provides details on common formwork systems in Malaysia like precast concrete, steel framing, and timber framing. Formwork systems offer benefits like strength, leak resistance, accuracy, and reusability. Examples of formwork systems discussed are Aluform panels and Mivan panels commonly used in India. The document also analyzes construction timelines for a sample high-rise building and compares benefits of Mivan formwork versus conventional formwork.
1.6 _Important element required to complete a buildingTeow Beng Hur
1. The document discusses an Industrialized Building System (IBS) using precast concrete elements for construction. It describes the 5 step process of drawings, mould production, production, delivery, and installation.
2. The system aims to build houses faster and cheaper by using precast concrete panels, beams, walls and other elements. This reduces costs compared to traditional construction methods.
3. Key benefits outlined are speed of construction, quality control, minimal waste, and accurate cost estimates since the building is designed digitally before construction.
Industrialized building systems (IBS) refer to building construction techniques that involve prefabricating building components off-site and assembling them with minimal work on-site. The document discusses IBS, providing a definition, characteristics, types including frame, panel and box systems. Benefits of IBS are highlighted such as reduced labor, waste and faster completion times. Challenges to adopting IBS in Malaysia are also examined, including a lack of expertise and the need for regulatory incentives to promote usage. Modular coordination is discussed as an important factor for effective IBS application through standardizing building measurements.
ONE OF THE WAY TO IMPROVE THE OUTFLOW OF CURRENCY IS THE UTILIZATION OF INDUSTRIAL BUILDING SYSTEM ( IBS ) :
- IBS is a system which suits all architectural demands. It is neither a machine nor component,
- IBS Superstructure In Malaysia 3in1 : HC PRECAST SYSTEM
- Load Bearing + Modular Shear Keys Wet Joint + Box System
This document provides details on the application of an Industrialized Building System (IBS) for a student assignment to design a 100 square meter apartment unit using prefabricated components. It discusses the strengths and weaknesses of IBS, presents a case study of an IBS apartment project, and outlines the tasks and methodology for the student design. The design will utilize precast concrete framing components like beams, columns, slabs, and staircases along with blockwork walls and a steel truss roof system.
Building Construction 1 - Experiencing Constructionjisunfoo
The document summarizes the group's site visit observations and documentation of the construction process for two residential buildings under construction in Bangi and Sepang, Malaysia. At the Bangi site, the group observed pile foundations being installed using a press-in method and pile load testing. They also documented the various stages of construction including site clearing, formwork, concrete pouring and the installation of beams and columns. At the Sepang site, which was nearing completion, the group focused on documenting the superstructure work including slab construction, wall installation and staircases.
The document discusses refurbishment of buildings, describing it as altering an existing building to improve facilities and rearrange internal areas without changing the original function. It defines three types of refurbishment - minor, medium, and major - and provides details about their purposes, durations, and scope of works. It then discusses stages of refurbishment including building investigation and recommendations. The document concludes with a case study on the restoration and refurbishment of the Old City Hall in Penang, Malaysia, outlining defects addressed, work undertaken, and challenges overcome in the project.
Building Technology 1_Report_IBS (Industralized Building System)Nekumi Kida
The document provides details of a project submission for an Industrialised Building Technology course. It includes an introduction covering the aims and objectives of the project, historical background of Industrialised Building Systems (IBS) in Malaysia, types of IBS, and advantages and disadvantages of IBS. It also includes technical drawings of floor plans, elevations, structural plans, component schedules, construction details and isometric views. Further sections describe IBS construction sequences, methods, advantages and disadvantages, as well as calculations for IBS score and conclusions.
Planning and Scheduling of Shuttering System for Multi-Storeyed BuildingIRJET Journal
This document discusses planning and scheduling of shuttering systems for multi-storey buildings. It begins by introducing different types of conventional formworks used such as timber, plywood and steel. It then focuses on Mivan technology, an advanced aluminum formwork system from Malaysia. The key components and working of the Mivan system are described. The advantages include light weight, high load capacity, reduced construction time and ability to be erected by unskilled labor. However, initial costs are higher and it may not be suitable for small projects. Overall, the Mivan system provides improved uniformity, quality and seismic resistance over conventional formworks.
Project 1 - Industrialised Building Systemhilmanaqil1
This document discusses an industrialized building system project focused on steel framing. It includes an introduction to IBS and classifications of systems. A comparison is made between industrialized and conventional construction, noting advantages like reduced time and costs for IBS. Steel framing system properties and examples are provided, along with construction details and a schedule of components.
This document reviews the feasibility of using modular construction techniques for hotel, housing, and worker accommodation developments. Modular construction involves factory production of prefabricated rooms or units that are assembled on site. Key benefits include short construction time, high quality control, reliable timescales, and price certainty. Modular construction works best for repetitive building types, where scheduling is tight, and quality is important. It can provide durable buildings with acoustic and thermal insulation that meet building regulations.
Pre-engineered buildings are factory-built structures consisting of prefabricated components that are assembled on-site. The components are designed and manufactured based on a client's requirements and structural calculations. This allows the building to be lighter and less expensive than traditional on-site construction, with components delivered and assembled more quickly.
The document presents a concept for a self-assembling curtain wall system that aims to address issues with traditional assembly methods. The key issues with traditional methods are that they are unsafe, labor-intensive, and difficult to perform in adverse weather conditions. The proposed concept uses small robotic actuators and sensors to allow panels to assemble themselves without heavy equipment or many workers. It was designed using various creativity techniques and prototypes were tested. While the concept showed promise in addressing the initial problems, some aspects like sealing and guidance require further testing before the system could be implemented.
Building Technology I : Project 2 : Construction SolutionsJing Fan Koh
This document provides an overview of a project proposal for a performing arts centre in Kajang Old Town, Malaysia. It includes an introduction to the site context and design brief. Precedent studies are presented on the structural system of steel frame, composite floor system, and metal deck roof with mineral wool. Details are given on the materials and construction processes for each system. The intention of the design is to encourage users to engage with the historical and cultural context of the area through the building and public spaces.
This Presentation Covers the knowledge of concrete which we are having as of now and how we are thinking about Concrete. Advanacment of concrete Technology.
Applications of advance Concreting practices like smary dynamic concrete. This knowledge was gained from the famours RMC producers.
Figure 1.1:Concrete Cloth
CC consists of a 3- dimensional fibre matrix containing a specially formulated dry Concrete mix. A PVC backing on one surface of the cloth ensures the material is completely waterproof, while hydrophilic fibres (Polyethylene and Polypropylene yarns) on the opposite surface aid hydration by drawing water into the mixture. The material can be hydrated either by spraying or by being fully immersed in water. It can be easily nailed, stapled through or coated with an adhesive for easy attachment to other surfaces. Once set, the fibres reinforce the concrete, preventing crack propagation & providing a safe plastic failure mode. CC is available in 3-thicknesses; CC5, CC8 & CC13, which are 5, 8 & 13 mm thick respectively
This document provides an analysis of facade and structural systems for the proposed Kajang Art Centre project in Malaysia. It examines two precedent studies for roof systems, including a metal cladding and steel frame roof; two facade systems, consisting of a double skin facade and folding perforated metal panels; and a steel frame structural system. For each precedent, the document outlines the key materials and construction details, and discusses advantages and disadvantages. It then presents two proposed facade design schemes for the front and rear elevations of the Kajang Art Centre. Sectional perspectives of the ground and top floors show additional construction details.
This document provides details about a factory visit assignment to Swissma Building Technologies Sdn. Bhd. and Sanko production sites by a group of quantity surveying students. It includes:
1) An introduction to Swissma's history and formation, services, and notable projects.
2) Descriptions of industrialized building system components produced by Swissma and Sanko, including standing seam roofing, metal tiles, and ribbed panels.
3) Explanations and photos of the installation processes for Swissma's Doppelwelt standing seam and Snapwelt roofing systems.
4) Overviews of the roll forming and crimping manufacturing processes used at Sanko's
Modular construction involves prefabricating building components off-site and transporting them to the construction location for assembly. This document discusses the benefits of modular construction compared to standard construction methods. Some key benefits include reduced construction costs through industrialized manufacturing, faster installation times, standardized components that improve productivity, and reusability of modular units that provide flexibility. The document also explains modular coordination, which involves dimensioning buildings and components using a standard module unit of 100mm to facilitate industrialized production and assembly of standardized building parts.
The document discusses Industrialized Building Systems (IBS) and proposes using several precast concrete systems - including precast columns, beams, slabs, walls, staircases and balconies - for a building project. It provides details on the manufacturing process for precast components and their advantages such as speed of construction, quality control and reduced maintenance costs. Connection methods are described for joining the various precast elements together on site.
Building Technology I : Project 1 : IBSJing Fan Koh
This document provides information on an Industrialized Building System (IBS) project involving blockwork components. It includes sections that describe the schedule of modular components, IBS score calculation, and conclusions. Diagrams and descriptions are provided on different types of IBS systems including blockwork systems. The fabrication process for blockwork components is outlined involving selection of ingredients, mixing, curing, cubing, and storing. Advantages and disadvantages of IBS construction are also discussed.
This document discusses industrialized building systems (IBS) and formwork systems used in construction. It provides details on common formwork systems in Malaysia like precast concrete, steel framing, and timber framing. Formwork systems offer benefits like strength, leak resistance, accuracy, and reusability. Examples of formwork systems discussed are Aluform panels and Mivan panels commonly used in India. The document also analyzes construction timelines for a sample high-rise building and compares benefits of Mivan formwork versus conventional formwork.
1.6 _Important element required to complete a buildingTeow Beng Hur
1. The document discusses an Industrialized Building System (IBS) using precast concrete elements for construction. It describes the 5 step process of drawings, mould production, production, delivery, and installation.
2. The system aims to build houses faster and cheaper by using precast concrete panels, beams, walls and other elements. This reduces costs compared to traditional construction methods.
3. Key benefits outlined are speed of construction, quality control, minimal waste, and accurate cost estimates since the building is designed digitally before construction.
Industrialized building systems (IBS) refer to building construction techniques that involve prefabricating building components off-site and assembling them with minimal work on-site. The document discusses IBS, providing a definition, characteristics, types including frame, panel and box systems. Benefits of IBS are highlighted such as reduced labor, waste and faster completion times. Challenges to adopting IBS in Malaysia are also examined, including a lack of expertise and the need for regulatory incentives to promote usage. Modular coordination is discussed as an important factor for effective IBS application through standardizing building measurements.
ONE OF THE WAY TO IMPROVE THE OUTFLOW OF CURRENCY IS THE UTILIZATION OF INDUSTRIAL BUILDING SYSTEM ( IBS ) :
- IBS is a system which suits all architectural demands. It is neither a machine nor component,
- IBS Superstructure In Malaysia 3in1 : HC PRECAST SYSTEM
- Load Bearing + Modular Shear Keys Wet Joint + Box System
This document provides details on the application of an Industrialized Building System (IBS) for a student assignment to design a 100 square meter apartment unit using prefabricated components. It discusses the strengths and weaknesses of IBS, presents a case study of an IBS apartment project, and outlines the tasks and methodology for the student design. The design will utilize precast concrete framing components like beams, columns, slabs, and staircases along with blockwork walls and a steel truss roof system.
Building Construction 1 - Experiencing Constructionjisunfoo
The document summarizes the group's site visit observations and documentation of the construction process for two residential buildings under construction in Bangi and Sepang, Malaysia. At the Bangi site, the group observed pile foundations being installed using a press-in method and pile load testing. They also documented the various stages of construction including site clearing, formwork, concrete pouring and the installation of beams and columns. At the Sepang site, which was nearing completion, the group focused on documenting the superstructure work including slab construction, wall installation and staircases.
The document discusses refurbishment of buildings, describing it as altering an existing building to improve facilities and rearrange internal areas without changing the original function. It defines three types of refurbishment - minor, medium, and major - and provides details about their purposes, durations, and scope of works. It then discusses stages of refurbishment including building investigation and recommendations. The document concludes with a case study on the restoration and refurbishment of the Old City Hall in Penang, Malaysia, outlining defects addressed, work undertaken, and challenges overcome in the project.
Building Technology 1_Report_IBS (Industralized Building System)Nekumi Kida
The document provides details of a project submission for an Industrialised Building Technology course. It includes an introduction covering the aims and objectives of the project, historical background of Industrialised Building Systems (IBS) in Malaysia, types of IBS, and advantages and disadvantages of IBS. It also includes technical drawings of floor plans, elevations, structural plans, component schedules, construction details and isometric views. Further sections describe IBS construction sequences, methods, advantages and disadvantages, as well as calculations for IBS score and conclusions.
Planning and Scheduling of Shuttering System for Multi-Storeyed BuildingIRJET Journal
This document discusses planning and scheduling of shuttering systems for multi-storey buildings. It begins by introducing different types of conventional formworks used such as timber, plywood and steel. It then focuses on Mivan technology, an advanced aluminum formwork system from Malaysia. The key components and working of the Mivan system are described. The advantages include light weight, high load capacity, reduced construction time and ability to be erected by unskilled labor. However, initial costs are higher and it may not be suitable for small projects. Overall, the Mivan system provides improved uniformity, quality and seismic resistance over conventional formworks.
Project 1 - Industrialised Building Systemhilmanaqil1
This document discusses an industrialized building system project focused on steel framing. It includes an introduction to IBS and classifications of systems. A comparison is made between industrialized and conventional construction, noting advantages like reduced time and costs for IBS. Steel framing system properties and examples are provided, along with construction details and a schedule of components.
This document reviews the feasibility of using modular construction techniques for hotel, housing, and worker accommodation developments. Modular construction involves factory production of prefabricated rooms or units that are assembled on site. Key benefits include short construction time, high quality control, reliable timescales, and price certainty. Modular construction works best for repetitive building types, where scheduling is tight, and quality is important. It can provide durable buildings with acoustic and thermal insulation that meet building regulations.
Pre-engineered buildings are factory-built structures consisting of prefabricated components that are assembled on-site. The components are designed and manufactured based on a client's requirements and structural calculations. This allows the building to be lighter and less expensive than traditional on-site construction, with components delivered and assembled more quickly.
The document presents a concept for a self-assembling curtain wall system that aims to address issues with traditional assembly methods. The key issues with traditional methods are that they are unsafe, labor-intensive, and difficult to perform in adverse weather conditions. The proposed concept uses small robotic actuators and sensors to allow panels to assemble themselves without heavy equipment or many workers. It was designed using various creativity techniques and prototypes were tested. While the concept showed promise in addressing the initial problems, some aspects like sealing and guidance require further testing before the system could be implemented.
Building Technology I : Project 2 : Construction SolutionsJing Fan Koh
This document provides an overview of a project proposal for a performing arts centre in Kajang Old Town, Malaysia. It includes an introduction to the site context and design brief. Precedent studies are presented on the structural system of steel frame, composite floor system, and metal deck roof with mineral wool. Details are given on the materials and construction processes for each system. The intention of the design is to encourage users to engage with the historical and cultural context of the area through the building and public spaces.
This Presentation Covers the knowledge of concrete which we are having as of now and how we are thinking about Concrete. Advanacment of concrete Technology.
Applications of advance Concreting practices like smary dynamic concrete. This knowledge was gained from the famours RMC producers.
Figure 1.1:Concrete Cloth
CC consists of a 3- dimensional fibre matrix containing a specially formulated dry Concrete mix. A PVC backing on one surface of the cloth ensures the material is completely waterproof, while hydrophilic fibres (Polyethylene and Polypropylene yarns) on the opposite surface aid hydration by drawing water into the mixture. The material can be hydrated either by spraying or by being fully immersed in water. It can be easily nailed, stapled through or coated with an adhesive for easy attachment to other surfaces. Once set, the fibres reinforce the concrete, preventing crack propagation & providing a safe plastic failure mode. CC is available in 3-thicknesses; CC5, CC8 & CC13, which are 5, 8 & 13 mm thick respectively
This document provides an introduction and overview of best practices for manufacturing precast concrete utility vaults. It discusses structural design considerations, recommended materials including concrete, aggregates, cement and admixtures. It also covers design loads, reinforcement, mix designs, and quality control procedures. The goal is to guide manufacturers in producing high-quality, durable utility vaults through attention to design, materials selection, production processes and quality standards.
This document provides a summary of products for groundwork and civil engineering projects. It describes Insulslab SFRC, an innovative foundation system using expanded polystyrene pods and steel fibre reinforced concrete. It also lists products for voids, gas barriers, geotextiles, drainage and more. The document is a catalogue showcasing SIG Construction Accessories' range of civil engineering and groundwork products.
This document provides specifications for constructing sewer manholes, including materials, installation procedures, and testing requirements. Concrete, masonry units, and precast sections will be used for manhole structures. Joints must be sealed and waterproof coatings applied. Manholes will be tested for water exfiltration leakage according to specified standards. Not less than 20% of manholes shall undergo testing to ensure compliance.
This document discusses concrete cloth, a flexible concrete-impregnated fabric that hardens when hydrated. It was developed by a British engineering company to provide a rapidly deployable emergency shelter. When hydrated, concrete cloth forms a thin, durable, waterproof and fire-resistant concrete layer. It has a variety of uses in construction and infrastructure projects due to its strength, flexibility, and ease of installation. Concrete cloth can be cut, joined, painted, and installed using common tools and techniques.
This document provides general notes for structural drawings including: do not scale drawings, read all contract documents before work, provide materials according to standards, protect workers, contact utility authorities before digging, maintain stability during construction, design loads are specified, and concrete requirements including curing and testing. It also provides notes for foundations including allowable bearing pressure and backfill, and notes for slabs on ground regarding earthworks, compaction, and sawcutting joints.
This document discusses basement construction using Dincel walls. It provides an introduction to the need for basement wall waterproofing to prevent issues like corrosion, moisture damage, and mold. It then summarizes the benefits of using Dincel walls for basement construction, which eliminates the need for waterproofing membranes and can provide a 100-year wall life. The document also describes different methods for excavating basements, including using shoring with piles or sheet piling, or battering sloped excavation depending on soil conditions.
IRJET- Behavior of Compound Concrete Filled Reinforced PVC Tubes Under Compre...IRJET Journal
This document discusses an experimental study on the compressive behavior of compound concrete filled reinforced polyvinyl chloride (PVC) tubes compared to unreinforced PVC tubes. Compound concrete contains a mixture of fresh concrete and demolished concrete lumps. Ten specimens were tested - two unreinforced and eight with internal steel stirrup reinforcement at varying spacings. Results showed that reinforced specimens had higher load capacity and compressive strength than unreinforced specimens. Closer stirrup spacing led to higher strength. Reinforcement improved the compressive performance of the composite tubes.
This document discusses seismic design requirements for ceiling structures according to Romanian codes. It summarizes past earthquake damage surveys that showed non-structural damage accounted for a large portion of costs. Code requirements are outlined that aim to limit ceiling failures and falling debris. Research tested different ceiling designs and fastening methods, finding fully connected ceilings performed best. Proper and improper execution details are shown, and actual ceiling collapses in Romania are listed. The document emphasizes the importance of code-compliant design and installation to limit seismic risks and economic losses from non-structural damage.
This document discusses the demolition of structures. It outlines the objectives, planning steps, safety measures, and methods used for demolition. Surveys are conducted to identify hazardous materials and structural details. A demolition plan is then prepared outlining the sequence, equipment, and safety procedures. Common demolition methods include mechanical techniques like wrecking balls, hydraulic breakers, and dismantling, as well as explosives for implosions. Factors like the structure type and location influence the chosen method.
This document discusses concrete cloth, a flexible cement-impregnated fabric. Concrete cloth hardens when hydrated to form a thin, durable concrete layer. It was originally developed for emergency shelters but is now used more widely in civil engineering. The document outlines the material properties of concrete cloth, including its strength and physical characteristics. It also describes how concrete cloth is installed, including preparation of the subgrade, placement of the cloth, cutting, and anchoring. Applications of concrete cloth include ditch lining, slope protection, pipeline protection, and more. Key advantages are that it is portable, rapid to install, easy to use, and more cost effective than conventional concrete.
This document provides information on roof construction, industrialized building systems, and precast roof systems. It discusses coated fiberglass membrane roofs, precast concrete walls, beams, columns, flooring, and staircases. Precast concrete is described as having advantages like ease of installation, consistent quality, and reduced weather dependency compared to site-cast construction. Details and specifications are given for various precast structural and envelope elements. The document serves as a reference for a student project on advanced roof systems and industrialized building techniques.
The document discusses different types of reinforcement used in concrete construction including hot rolled deformed bars, mild steel plain bars, cold worked steel reinforcement, and prestressing steel. It also discusses ready mixed concrete (RMX), the working process of RMX, advantages and disadvantages compared to site mixed concrete. The document provides information on major RMX companies. It also discusses insulating concrete formwork (ICF), crosswall construction formwork, and photos of ICF site installation.
The document discusses passive control systems for reducing structural response to earthquakes. It describes how passive systems utilize structural motion to dissipate seismic energy without an external power source. Specific passive devices mentioned include base isolation systems, which install flexible materials below structures to filter ground motion, and passive energy dissipating devices that absorb energy through mechanisms like yielding metals, friction, or viscoelastic damping. Common base isolation bearing types are also outlined, such as elastomeric, lead-rubber, and sliding bearings.
The document discusses cathodic protection systems for repairing reinforced concrete structures. It describes two main types of cathodic protection - sacrificial anode cathodic protection (SACP) and impressed current cathodic protection (ICCP). ICCP uses an external electrical current to protect steel reinforcement from corrosion, while SACP uses sacrificial metal anodes. The document provides details on ICCP components and advantages such as flexibility and minimal concrete removal. It also notes disadvantages like requiring electrical power and specialist monitoring. Sample case histories describe using ICCP to repair bridge piers and highway structures by dividing them into protection zones.
Affordable Housing company in India WorldHaus Inc.WorldHaus
Mission: Make High-Quality Housing Affordable for Every Family
Vision: Tackle India’s Housing Crisis by Designing and Delivering One Million Homes With a Price and Amenities Within the Reach of India’s Lower and Middle Income Groups
Our Model: WorldHaus is a "Design and Build" construction technology firm that delivers low-cost housing solutions at prices 20-30% lower than existing nstruction methodologies, we achieve this through:
Working with our customers to design structures by maximiz ing the speed, efficiency, and strength through WorldHaus’ proprietary technology suite
Constructing buildings up to 4 floors using WorldHaus’ SmartBlockTM and RapidPanelTM construction system in half the time of existing systems Partner ing with and mentoring existing construction firms to build with our proprietary products like SmartBlockTM and RapidPanelTM systems through sales, technical support, and construction supervision
This document provides information on different surface finishing techniques for concrete. It describes smoothing the surface with a hand float, and then further finishing options like magnesium, aluminum or wood floats. Troweling with magnesium or steel trowels is covered, with notes on timing to avoid damaging the concrete. Broom finishing is also explained, including using a stiff broom and dragging it over the wet surface to create a non-slip texture. The summary concludes with the importance of curing the concrete to allow proper drying over several weeks.
This document provides information on formwork used in concrete construction. It defines formwork and lists its common materials as steel and wood. It describes the major objectives in formwork as quality, safety, and economy. It discusses the various types of formwork including temporary and permanent structures. It also provides details on formwork for different structural elements like walls, columns, slabs, beams, stairs, and chimneys. Finally, it covers topics like requirements, loads, design, and maintenance of formwork.
Design and optimization of ion propulsion dronebjmsejournal
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Generative AI Use cases applications solutions and implementation.pdfmahaffeycheryld
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
Applications of artificial Intelligence in Mechanical Engineering.pdfAtif Razi
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Rainfall intensity duration frequency curve statistical analysis and modeling...bijceesjournal
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...IJECEIAES
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELijaia
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Software Engineering and Project Management - Software Testing + Agile Method...Prakhyath Rai
Software Testing: A Strategic Approach to Software Testing, Strategic Issues, Test Strategies for Conventional Software, Test Strategies for Object -Oriented Software, Validation Testing, System Testing, The Art of Debugging.
Agile Methodology: Before Agile – Waterfall, Agile Development.
Software Engineering and Project Management - Introduction, Modeling Concepts...Prakhyath Rai
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Want To Know About Concrete Wall System?
1. Page 1 of 23
CCOONNCCRREETTEE WWAALLLLSS
WWIITTHH
PPEERRMMAANNEENNTT FFOORRMMWWOORRKK
HHAAVVIINNGG FFIIBBRREE--CCEEMMEENNTT SSHHEEEETTSS
((OORR SSIIMMIILLAARR)) OONN BBOOTTHH FFAACCEESS
DISCLAIMER
The information contained in this document is intended for the use of suitably qualified and
experienced engineers. This information is not intended to replace design calculations or
analysis normally associated with the design and specification of buildings and their components.
Dincel Construction System Pty Ltd accepts no liability for any circumstances arising from the
failure of a specifier or user of any part of Dincel Construction System to obtain appropriate
professional advice about its use and installation or from failure to adhere to the requirements of
appropriate Standards and Codes of Practice, and relevant Building Codes.
3. Page 3 of 23
((AA)) AARREE FFIIBBRREE--CCEEMMEENNTT SSHHEEEETTSS SSUUIITTAABBLLEE FFOORR PPEERRMMAANNEENNTT CCOONNCCRREETTEE
FFOORRMMWWOORRKK PPUURRPPOOSSEESS??
NO. Fibre-cement sheets are developed for the cladding of dry wall construction.
Fibre-cement sheets are not suitable for concrete formwork purposes.
(download) Leaky Buildings – Are Fibre-Cement Sheets Suitable
((BB)) CCOOMMPPAARRIISSOONN TTAABBLLEE –– DDIINNCCEELL VVSS FFCC WWAALLLLSS
CCOONNCCRREETTEE WWAALLLLSS WWIITTHH PPEERRMMAANNEENNTT FFOORRMMWWOORRKK
BBUUIILLDDIINNGG AAUUTTHHOORRIITTYY CCOOMMPPLLIIAANNCCEE IISSSSUUEESS AANNDD CCOOMMPPAARRIISSOONNSS
The system matching the above description consists of metal studs of ‘C’ shaped forms
at close centres to hold the fibre cement sheets at both faces by means of glue as a
formwork for concrete infill. The generic names of these walls are called FC Walls in the
following table.
The below table is a comparison between Dincel and FC Walls and also highlights some
possible non-compliance issues (refer chapters following the below table) which includes the
following for:
• Structural Design Engineers:
Item (C) (5) Structural Capacity.
Item (C) (1) Durability.
Item (C) (8) Voids in concrete walls.
• Builder:
Item (C) (6) Delamination of fibre-cement sheets.
Items (2) and (3) The requirement of cavity façade walls.
Leaky Building Syndrome.
• Principal Certifier:
Acceptance of the above items.
IISSSSUUEE DDIINNCCEELL WWAALLLL FFCC WWAALLLL
SSuuiittaabbiilliittyy ffoorr
CCoonnccrreettee
FFoorrmmwwoorrkk
YES. The Dincel polymer perfectly
suits as a formwork, cannot be
damaged by water alkaline conditions
and eliminates honeycombing
problem.
✔
NO. Fibre-cement sheets are not
suitable when used in contact with
water – high alkaline conditions
(download – Leaky Buildings)
cause honeycombing, air voids, etc.
✘
SSkkiilllleedd LLaabboouurr Except one supervisor. NIL skilled
labour required. ✔
YES. Specialist team required.
✘
4. Page 4 of 23
IISSSSUUEE DDIINNCCEELL WWAALLLL FFCC WWAALLLL
LLiigghhttwweeiigghhtt YES. 13 kg/m
2
, typical panel (0.33m
wide), of 3m high is 13 kg. ✔
NO. Average 33 kg/m
2
, typical
panel (1.2m wide) of 3m high is 118
kg.
IMPORTANT: The Worker Safety &
Health Act 2011 requires that each
of these panels must be installed by
cranes. No manual lifting heavier
than average 20kg/man is allowed.
✘
BBrraacciinngg ffoorr
IInnssttaallllaattiioonn
NIL required when associated with
conventional floor formwork. ✔
Closely placed bracing required in
each application. ✘
FFaasstteerr Safe speed of installation is
18m
2
/man/hour. (Download) Dincel
“Solution for Construction Safety”
for lifting limits under the Worker
Safety & Health Act 2011.
• Lighter – this allows Dincel and
conventional floor formwork to be
installed on Day 1.
• Elimination of wall bracing and
joints.
• Water and electrical reticulation
can be done at any time and
eliminates the critical path for the
coordination of three trades.
• Dincel is not affected by wet
weather conditions.
✔
Claimed speed of installation is
100m
2
/day for 3 men, for 8 hours a
day: 4.2m
2
/man/hour.
• Heavy panels require the walls
to be installed (utilising diagonal
wall bracings) before the
installation of conventional floor
formwork. In comparison to
Dincel, this is significant
additional loss of time.
• Under wet weather conditions
fibre-cement sheets lose their
strength significantly which may
result in either bulging or blow-
out of the formwork.
✘
WWaallll JJooiinnttss Dincel Wall does not require wall
joints. Walls already built up to 140m
long without joints.
✔
FC Walls are required to have joints
at 5m to 8m centres. ✘
WWaatteerrpprrooooff YES. Dincel is certified by CSIRO
under 6m head of water pressure.
Dincel is currently used even for water
tanks.
✔
NO. FC Walls are NOT waterproof.
Fibre-cement sheets cannot be
used in contact with water.
✘
VVaappoouurr BBaarrrriieerr YES. Dincel has vapour barriers on
both faces. It is a BCA requirement
that façade walls have vapour barriers
on the warm face of the wall (i.e. both
sides in all except for tropical
climates).
✔
NO. FC Walls require vapour
barriers. ✘
WWoouulldd tthhee
pprreesseennccee ooff
sseerrvviiccee
rreettiiccuullaattiioonn
ccaauussee aaccoouussttiicc
ccoommpplliiaannccee
pprroobblleemmss
NO.
The net concrete thickness between
the Dincel service spacers is 150mm
hence complies with the BCA’s
deemed-to-satisfy condition.
✔
YES. The BCA acoustic deemed-
to-satisfy compliance is minimum
net concrete thickness of 150mm
thick concrete. Services must not
reduce this thickness at any point.
Refer Item (12) following this table.
✘
5. Page 5 of 23
IISSSSUUEE DDIINNCCEELL WWAALLLL FFCC WWAALLLL
EElleeccttrriiccaall aanndd
WWaatteerr
RReettiiccuullaattiioonn
YES. Can be installed even after wall
concrete filling because of inbuilt
service spacers. This eliminates the
critical path between the plumbing,
electrical and wall installation trades.
✔
NO. Placed prior to concrete filling
which causes further delay for
concrete pouring because of
service reticulation.
✘
SSttrruuccttuurraall
CCoommpplliiaannccee
• Dincel complies with the “deemed
to satisfy” conditions of AS3600
and other international concrete
structures codes such as ACI 318
and EuroCode. This gives Dincel
the design capacities allowed by
the concrete codes.
✔
• “FC Wall is an alternative
solution” in which its load
capacity is limited to its fire
testing report. Refer Item (5) –
Structural Engineering Fire
Certificate chapter following this
table.
• As explained in the following
document Item No: (7) FC Wall
does NOT comply with AS3600
– Section (3) – durability
requirement.
✘
NNoonn BBCCAA
CCoommpplliiaannccee
NIL
✔
Refer to the document following this
table for the quoted item numbers.
• Delamination of fibre-cement
sheets – Item (6).
• Potential corrosion of metal
studs – Item (7).
• The use of single skin façade
wall items (2) and (3).
• Undetected voids in concrete
leading to non-compliance for
structural strength, fire and
acoustics – Item (9).
✘
RReeiinnffoorrcciinngg
sstteeeell aanndd
ccoonnccrreettee
uussaaggee
• Dincel can be used with no vertical
or horizontal steel for walls subject
to axial compression. Basement
walls only require vertical steel
bars.
• 20 Mpa or even lower concrete
strength can be used.
• Honeycombing cannot happen.
✔
• FC Walls require both
horizontal and vertical steel.
• FC Walls’ fire certificate states
that minimum concrete strength
is 32 Mpa.
• Honeycombing and air pockets
are commonly observed.
✘
EEnnvviirroonnmmeenntt//
CCOO22
• Dincel mainly uses no steel which
is the main CO2 producer.
• Dincel has been used with 50%
less cement and still achieved 32
Mpa concrete.
• AS3600 - minimum 20 Mpa
Concrete Durability requirement
can be reduced because of
Dincel’s waterproof polymer
formwork protection.
✔
• FC Wall is a significant CO2
producer because of its metal
studs.
• FC Walls’ fire certification limits
its use to 32 Mpa.
✘
6. Page 6 of 23
((CC)) EEXXPPLLAANNAATTIIOONN OOFF CCOOMMPPAARRIISSOONN TTAABBLLEE
(1) AS3600 – SECTION 4, STRUCTURAL ENGINEERING – DURABILITY COMPLIANCE
SYSTEM A SYSTEM B
CONVENTIONAL REINFORCED CONCRETE PROPRIETARY CONCRETE WALL WITH PERMANENT
WITH REMOVABLE FORMWORK FIBRE-CEMENT OR MgO SHEET FORMWORK
FIGURE 1
SYSTEM – A
• Concrete cracking is unavoidable; if the crack width is less than the AS3600 allowance they are self-healed
(i.e. crack is closed) because of calcination (i.e. autogenous healing). This way, corrosion of the steel and
deterioration of the concrete due to environmental attacks are avoided.
SYSTEM – B
• MUST HAVE CONCRETE COVER over any metallic component (irrespective of whether metal channels are
used for structural purposes or not) TO COMPLY WITH AS3600 – 2009 – Clause 4.10.3.7.
• Drying concrete shrinks away from the face of metal channels causing a permanent gap/crack that will allow
air, moisture or water to pass through.
• The gap between concrete and metal (unless it is concrete to concrete) cannot self-heal.
• The gap created leads to corrosion of the steel bars, metal channels and deterioration of concrete. This is
why System-B must have adequate concrete cover at each face covering the metal channels as shown
above in Detail B.
• AS3600 does not accept galvanising or paints, even membranes in lieu of concrete cover. Refer
Appendix, Item No: 1, AS3600 commentary by Paul Walsh, CSIRO and AS3600, Table 4.3, Note 9:
“protective surface coatings may be taken into account in the assessment of exposure classification”.
The minimum AS3600 compliance requirement for the design life of any structural wall is 50 years +/- 20%
(AS3600 – Clause 4.1) which is up to 60 years.
7. Page 7 of 23
AS3600, Clause 4.10.3.7 compliance for durability purposes cannot be achieved for FC Walls
since the metal channels, at their surface, only have 6mm fibre-cement sheet in lieu of the
mandatory concrete cover. Inadequate concrete cover at the surface of FC Walls will lead to
corrosion of the metal channels which will lead to corrosion related steel expansion and
concrete spalling.
The only form of protection for the FC Walls at the building façade that is commonly available
is the application of an ordinary paint/render finish which is not a membrane system. AS3600
(Concrete Structures Code) Clause 4.3 (refer Appendix – Item 1) does not recognise ordinary
paint/render as adequate protection for durability purposes. The recognised protective
coatings (i.e. membranes, galvanising) do not provide any concession to avoid
minimum concrete cover requirement (refer Appendix – Item 1, AS3600, Table 3, Note: 9)
of the Concrete Structures Codes such as AS3600, ACI318 or Eurocode.
Further to the above, warranties for membranes and galvanising can only be accepted subject
to ongoing maintenance (refer AS3600 – Appendix Items 1 and 2). In the case of the
galvanised studs (it must also be considered that light galvanising can easily be
damaged by aggregates during the placement of concrete infill; further to this no
manufacturer provides a guarantee for 60 years for light galvanising), it should be noted
that they are hidden by the glue fixed fibre-cement sheeting, therefore the metallic
components cannot be visually inspected and corrosion is therefore allowed to occur
behind the fibre-cement sheet with no method of inspection and no method of repair.
This does not comply with the ongoing maintenance requirement of AS3600 where
protective coatings (galvanising, membranes) are used to reduce minimum concrete
cover requirement.
The following diagram represents a case where there is not even a paint protection to
the FC Walls.
CONSTRUCTION AGAINST EXISTING BUILDINGS
FIGURE 2
The problems highlighted in this document can be worsened. Walls of a new building of the above
diagram having concrete facade walls incorporating fibre-cement sheets as formwork will have no
protection offered by external coating systems, particularly when Zones A and B of the above
diagram have no adequate access.
8. Page 8 of 23
(2) CONTROL OF MOISTURE FLOW
Rain penetration, water diffusion, air leakage and condensation are potential issues that relate
to moisture flow within FC-Walls due to their porous nature.
Wall systems incorporating porous claddings such as fibre-cement sheets absorb rainwater or
water from the concrete mix during construction. This is the reason why buildings experience
most condensation/mould/mildew problems within the first 12 months after the buildings’
completion. The absorbed water or moisture remains in the concrete itself, then is released
through the porous fibre-cement sheets in the early stages of the building’s life while the walls
are still drying. The presence of moisture flow is known to cause paint peeling off,
excessive shrinkage resulting in cracking at the fibre-cement sheet joints, mould and
mildew problems. This problem is therefore relevant for all internal or façade walls
having fibre-cement sheets and concrete infill. For further information (download) – Leaky
Buildings – Are Fibre-Cement Sheets Suitable.
Applied paint/render systems on FC-Walls cannot stop moisture flow unless they use
membrane systems which are required to be maintained on an ongoing basis. The Australian
Concrete Structures Standard AS3600 – commentary clause 4.3 (refer Appendix – Item
1) does not recognise common commercially available paint/render systems as
protection to walls for durability purposes because the moisture flow due to their
porous nature cannot be avoided.
FC-Walls are required to have joints. The presence of joints also makes the control of
moisture flow nearly impossible unless cavity walls at the facades are provided.
Dincel is joint free waterproof wall which does not allow moisture flow. (Download –
CSIRO Certificate to see vapour transmission testing and certification).
Dincel-Wall is the only waterproof wall as tested and certified by CSIRO (download –
Waterproof Walls) – other walls can be made waterproof by application of membrane
systems.
(3) THERMAL BRIDGING
FC-Walls incorporating metal studs joining each face of the wall provides the path for thermal
bridging (i.e. energy efficiency, mould/mildew).
Walls with thermal bridging will require a well-ventilated and insulated cavity and inner skin wall
to avoid condensation/fungus growth.
Dincel Wall’s polymer protection avoids thermal bridging.
(4) VAPOUR BARRIERS
Vapour barriers are required on the warm face of building façade walls. The warm face of the
building façade wall can be the internal or external face of single skin FC-Walls depending on
the climate.
A wall with fibre-cement sheets may consist of externally applied paint/render incorporating a
2mm skim coat to the entire wall’s face, and 2mm skim coat plus painting for the internal face
of a façade wall. The definition of the required impervious vapour barrier sheeting will not be
satisfied if the applied paint/render system and 2mm skim coat is identified as porous (i.e. not a
membrane system) material.
As previously highlighted, AS3600 – Commentary Clause 4.3 (refer Appendix – Item 1) states
that only membrane type paints (provided ongoing maintenance program is established) are
qualified as non-porous, hence can be used as vapour barriers.
9. Page 9 of 23
Dincel-Walls’ permanent polymer encapsulation automatically complies with this
requirement on both faces of the wall. (Download – CSIRO Certificate. Dincel’s vapour
transmission rate is 180 times better than the standard).
(5) STRUCTURAL ENGINEERING - FIRE CERTIFICATION OF FC WALLS
AS3600 – 2009, Appendix B, states that “alternative solutions” can only be used within the
limits of the test reports (i.e. fire, durability, etc.). FC Walls consist of closely spaced metal
channels. These metal channels do not have any concrete covers to them. This is why FC
Walls are classified as an “alternative solution”.
It is important to understand that the prototype adopted by all engineering codes does
not consist of metallic components (refer Figure 4) other than steel reinforcement.
Therefore, it is the structural engineers’ responsibility to ensure that the FC Walls are designed
within the limits of their fire testing certification.
It appears that there is a misinterpretation by some structural engineers about the use,
limits and applicability of fire test report for FC Walls. It is therefore important to explain
the following:
(i) The Fire Behaviour of Conventional Concrete Walls
This subject is explained by (download) Dincel Solution for Hydro Carbon Fire.
However, the fire spalling behaviour of conventional reinforced concrete walls can be
summarised as follows:
(a) Pore Pressure Spalling
(b) Aggregate Expansion Spalling
(c) Reinforcing Steel Expansion Spalling
If steel reinforcement does not have adequate concrete cover for insulation
purposes, the heat quickly reaches the steel. The steel bars expand under the
heat of fire causing spalling to concrete. Refer Figure 3 below.
FIGURE 3
10. Page 10 of 23
(ii) The Fire Behaviour of FC Walls
The abovementioned conventional concrete behaviour occurs with FC Walls as well.
However, FC Walls are potentially subjected to additional concrete spalling for the
following reason.
Figure 4 below shows a typical FC Wall. The metal channels are closely spaced to each
other. The flanges of the metal channels further reduce the clear distance between the
channels. The metal channels’ surface coverage is at least 30% at each wall face. The
face of the metal channels is covered with 6mm fibre-cement sheets which delaminate
and detach from the metal channels in a short space of time (fire tests show that this
period is 15 minutes) during a fire event. This results in the metal channels being directly
exposed to fire.
The exposed (i.e. unprotected) flange of the partially encased metal ‘C’ shape channel,
under the fire’s heat, expands and the resultant stress causes “corner spalling”
emanating from the face of the metal channel as shown in the figure below. The effect of
normal concrete’s spalling behaviour in a fire event is thus further exacerbated by the
presence of exposed metal flanges.
FIGURE 4
It can be argued that the metal channels of FC Walls are not used for structural purposes. The
main issue is to understand that the presence of metal channels contribute to additional
spalling in comparison to conventional concrete which is beyond normal concrete structures
codes. Concrete structures codes such as AS3600, ACI318 or Eurocode are specifically
written for concrete walls without any built in metal channels of Figure 4 above. This additional
spalling may cause structural failure, especially in highly stressed FC Walls.
Why is Concrete Spalling Important?
During a fire event, the structural wall thickness reduces due to concrete spalling as explained above.
International engineering codes, including the Australian AS3600, are based on the test results for
conventional reinforced concrete walls having adequate cover to steel reinforcements. These tests
determine the engineering code recommendations which account for concrete spalling due to pore
pressure, aggregate expansion and having adequate cover to the steel. The fundamental
difference between FC Walls and conventional concrete walls is the presence of closely
spaced metal channels (i.e. 33% of metal coverage of the wall surface) which generates
11. Page 11 of 23
additional concrete spalling in comparison to conventional concrete walls. Additional
spalling means reduction in wall thickness during a fire hence reduction in the load carrying
capacity. This difference distinguishes FC Walls from conventional reinforced concrete walls.
Conventional concrete walls, accepted by the Concrete Structures Code, do not
accommodate the metal channels shown in Figure 2. Therefore, FC Walls clearly do not
conform with the prototype accepted by the Concrete Structures Codes. This is why FC Walls
should not be engineered using AS3600 or a similar engineering code unless FC Walls
produce test results above the test criteria shown below.
It must be clear to FC Walls specifiers and users that FC Walls must be used within the limits
of their fire test certificates. A typical example is as follows:
(i) Concrete specification; 32Mpa, 10mm aggregate, 120mm slump.
(ii) 200 kN/m maximum load carrying capacity.
(iii) 3,000mm maximum wall height.
(iv) 136mm net concrete thickness.
Concrete spalling in an actual fire or fire test occurs within the first 45 minutes of fire
exposure. As a result, the collapse of the wall with excessive spalling can even occur at 30 to
45 minutes of fire exposure if the wall carries a load in excess of 200 kN/m test load. It is
therefore essential for all design engineers to limit their design for FC Walls within the above
parameters as stated in the CSIRO letter dated 24th
August 2006 (copy available upon
request).
The moisture in the concrete determines the magnitude of concrete spalling. EuroCode hence
AS3600 – 2009 adopts the concrete spalling values as less than 3% moisture. (Download) –
Compliance of Concrete Mix Specification.
No one knows how FC Walls will behave under fire conditions at high load capacities unless
they are tested at the level as claimed by FC Walls. Fire testing facilities do not allow more
than 300 kN/m load tests. FC Walls tested load capacity is 200 kN/m. Would the presence of
metal studs create additional concrete spalling that could lead to structural collapse? (the
answer is YES according to known science as unprotected metal expansion causes additional
spalling).
AS3600-2009, Appendix B states that a product’s performance/compliance if demonstrated by
testing, the test loads must represent 100% of the design loads. In other words, FC Walls
cannot be used above the test loads of 200kN/m.
(6) SAFETY ISSUE DUE TO DELAMINATION OF FIBRE-CEMENT SHEETS
(i) Under Fire Conditions – BCA Fire Resistance/Stability and Exit Requirements
The delamination and detachment of fibre-cement sheets during building façade
wall fires, due to their glued attachment to metal channels of FC walls, represents
safety liability for by-passers and fire fighters (i.e. detached sheets of say 1.2m x
2.7m can be airborne for significant distances).
The following compliance will be relevant to the subject walls:
• BCA – 2010 Part C1 – Fire Resistance and Stability Clause C1.12 (f) (ii), (iii) and
(iv), and
• BCA – 2010 Specification C1.1 Clause 2.4 (a) (i) and (ii).
12. Page 12 of 23
The delamination of the attachments (i.e. fibre-cement sheets), because of adhesives,
must comply with Clause C1.12 (f) (ii) and (iii) so that the delaminating fibre-cement
sheets does not make the required exit unusable – (BCA Specification C1.1 – Clause 2.4
(a) (ii)). This item in particular must be assessed under the Worker Health & Safety Act
2011.
FC Wall’s fire testing clearly states that fibre-cement sheets delaminate after 15 minutes
exposure to fire (no glue can resist heat of more than 80°C).
The building fire temperature reaches 400°C within 5 minutes and 800°C within 15
minutes in accordance with CSIRO. It is recognised that delamination of fibre-cement
sheets occur within 15 minutes of fire testing of FC Walls when the temperature in the
furnace reaches about 800°C. There will be no people within the building to be affected
from falling fibre-cement sheets at 800°C fire intensity. However, this explanation does
not cover the exterior face of façade wall fires.
The BCA Clause Specification C1.1 Clause 2.4 (a) (ii) is to eliminate the above or similar
incidents. This issue will be particularly important when considering that the fire fighting
response time is 20 minutes. Therefore, the delaminated panels will most likely
interfere with the actions of the fire fighters.
(7) BUILDABILITY (Easier Construction) AND SAFETY
Refer (download) Dincel Solution for Construction Safety
• Dincel-Forms are lightweight (13kg per 3m length), thus can be easily man handled (no
need for on-site cranage). FC-Walls’ typical panel of 1.2 x 3m weighs 118 kg which is
clearly beyond the acceptance of Work Safety regulations for manual handling.
• Heavy FC-Walls with metal component may represent a potential hand cutting injury
during manual handling.
• Non-skilled labour use. The FC-Walls are required to be installed and concrete poured
by skilled installers. Dincel is the only system that allows installation even by first time
users.
• Dincel-Walls’ inbuilt service spaces allow water reticulation or power/communication
cables to be installed before or after concrete infilling. It allows windows to be installed
before or after construction from the inside of the building without the need for
scaffolding. The load bearing Dincel-Wall/Column system allows the formworking trades
to construct the entire building skeleton without wall bracings (with conventional floor
formwork) and without other trades interfering with the formworking trade. This way, the
ultimate coordination and sequencing is achieved and no other building trades are on the
critical path of the formworking/concreting trades.
• FC-Walls are erected using diagonal wall bracing at close centres. This represents a
safety issue to the formworking trades installing the floor formworking. However, Dincel
is installed by the floor formworking trade without bracings, thus eliminating a very clear
safety risk.
• Dincel-Forms are assembled by simply snapping the forms to each other which provides
unmatchable construction speed, together with the abovementioned issues when
compared to FC-Walls.
13. Page 13 of 23
AIR VOIDS CAUSE CORROSION
(PHOTOS FROM A BUILDER OF A SYDNEY PROJECT THAT HAS USED FC WALLS)
AIR VOIDS
IDENTIFIED AND
GROUTED BY THE
INSTALLER
AIR VOIDS FAILED
TO BE IDENTIFIED
BY THE INSTALLER
WHO GROUTED THE
ABOVE VOIDS
AIR VOIDS
AIR VOIDS
GLUE ON METAL
CHANNELS
FIBRE CEMENT
SHEET JOINT
FIBRE CEMENT
SHEET
REMOVED FOR
INSPECTION
14. Page 14 of 23
(8) WALL FORMWORK
Dincel-Form consists of polymer skins which do not allow capillary action between the wet
concrete mix and polymer form unlike fibre-cement sheets. No friction can possibly develop in
the absence of capillary action, hence honeycombing.
Honeycombing is a common problem and is unavoidable with porous formworking materials
such as fibre-cement sheets or masonry blocks resulting in voids in concrete walls. These
honeycombing voids are potential problems compromising acoustic, fire and structural
performance.
This is the reason why the installers of FC-Walls are known to tap the face of the concreted
walls to look for and fill those voids that they can identify. The ones that are not identified
remain with acoustic, fire and structural concerns.
The above photo shown on page 13 reveals typical air voids normally experienced by FC
Walls.
FC-Walls are also known to use very high concrete slumps which require high skilled labour
use to avoid bulging/blowouts and naturally will require extended periods of drying time before
application of the paint/render finishes if high water/cement ratios are used to achieve high
slump.
The high slump concrete (i.e. typical block mix, 10mm aggregate, about 200mm slump) comes
with a water/cement ratio of (W/C) = 0.7 to 0.90 which does not comply with AS3600 – 2009
requirement of maximum W/C = 0.5. This is a requirement originated from the EuroCode. For
further information refer (download) Compliance of Concrete Mix Specification.
(9) CONCRETE USE
The most important issue is to check and confirm that the proposed concrete mix complies with
AS3600 (download) – Compliance of Concrete Mix Specification.
The following issues for concrete use and specifications are required to be considered:
(i) Concrete Walls with Fibre-Cement Sheets, i.e. FC-Walls
• Honeycombing and air voids are important, refer Item 8: “Wall Formwork”. This
leads to the problem explained in Item 2: “Control of Moisture Flow”.
• It will be important to maintain the required concrete mix specification of the FC
Wall’s manufacturer, particularly control of the water/cement ratio.
• The pouring and avoidance of bulging or blow-outs of the fibre-cement sheets,
particularly following wet weather conditions, requires highly skilled concreters.
• The lightly galvanised metal studs are only protected by the porous paint/render
finish on the fibre-cement sheets which is not allowed by AS3600. The possibility
of corrosion of the metal studs in time is clearly warned by the Australian Standard
AS3600 Commentary clause 4.3
• Due to the porous nature of fibre-cement sheets, FC-Walls will be subjected to the
durability requirement of the Australian Standard AS3600 Concrete Structures
Code, i.e. 40 Mpa concrete grade use within 1km of coastal areas and so on (i.e.
additional cost).
15. Page 15 of 23
(ii) Dincel-Walls
No durability requirement due to the permanent waterproof Dincel polymer
formwork.
Lower concrete grades can be used due to the presence of the permanent
waterproof membrane formwork. The perfect covering offered by the permanent
Dincel polymer formwork ensures that hydration of the concrete continues which
achieves concrete strength that is much higher than the design’s target strength.
The combination of all of these benefits will result in the use of less cement and the
ability for higher usage of fly ash within the mix.
Thus, the concrete infill of Dincel-Wall can become significantly cheaper and
environmentally friendly (i.e. less cement).
(10) STEEL REINFORCEMENT USE
Dincel Construction System’s Structural Engineering Manual has been certified by the
University of New South Wales. Basement walls resisting earth/water pressure will only
require vertical reinforcement but no horizontal crack control reinforcement (download –
Common Engineering Questions and refer to Items 1, 2 and 11).
Dincel-Walls, under compression loads only, DO NOT NEED to have any steel reinforcement.
However, FC-Walls must have both vertical and horizontal steel reinforcement in all cases.
Overall, Dincel-Walls eliminate 90% of steel reinforcement usage in comparison to FC-
Walls or conventional concrete walls.
(11) ENVIRONMENTAL IMPACTS
• Dincel-Walls eliminate or reduce the use of steel reinforcement. The concrete of Dincel-
Wall is not subjected to Australian Standard AS3600 durability requirements; hence
lesser grade concrete can be used, i.e. significantly less cement quantity can be used.
• Elimination of the durability requirement allows up to 50% fly-ash use as cement
replacement with Dincel Walls.
FC-Walls incorporating metal ‘C” channels to make the formwork’s frame represent
the use of higher embodied energy materials (i.e. more metal) resulting in
significantly more CO2 emission. (Download – Part 1 Energy Efficiency)
• Dincel does not require additional vapour barriers and eliminates ongoing maintenance
with paints, cracks, etc.
• Dincel does not require additional membranes in basement walls.
• Volatile organic compound off-gassing of Dincel-Wall is measured to be below the
detection level which is 50 times better than the Green Star rating. This proves that
Dincel-Wall contributes to healthy air in the building environment (certificate is available
on Dincel website).
• Dincel Walls do not support condensation, mould, mildew and fungus growth.
• The use of fibre-cement sheets as formwork for concrete as explained in (Download –
Leaky Buildings) is not suitable due to high water, alkaline environment. These
conditions result in mould, mildew, sick building syndrome and increase the maintenance
requirements and reduce the life of the concrete wall incorporating fibre cement.
16. Page 16 of 23
(12) ACOUSTICS
Various acoustic tests state that 150mm thick off form concrete has Rw + Ctr = 47 dB which is
less than 50 dB which is the Building Code of Australia’s requirement.
FC Walls commonly require plasterboard cladding due to installation imperfections.
Refer Acoustic Certifiers that state even 200mm thick walls cladded by daub glue fixing
DOES NOT COMPLY WITH Rw + Ctr > 50 dB requirement.
((DD)) AARREE MMAAGGNNEESSIIUUMM OOXXIIDDEE BBOOAARRDDSS SSUUIITTAABBLLEE FFOORR PPEERRMMAANNEENNTT CCOONNCCRREETTEE
FFOORRMMWWOORRKK PPUURRPPOOSSEESS??
NO, Stop using magnesium oxide boards due to the following reasons:
Magnesium oxide (MgO) boards as permanent formwork for concrete infilling have been used
and are still being used by many proprietary concrete wall systems.
MgO boards should not be used as formwork for concrete infilling. When MgO boards come in
contact with water, magnesium chloride will leach out of the board and will degrade the
integrity of the cement. Not to mention that magnesium chloride salts are corrosive to metal
(including steel reinforcement) when it comes into contact with water.
The United States of America’s acceptance criteria for MgO boards, AC386 states that
Magnesium Oxide Boards shall not be used in wet areas (i.e. wall subject to moisture;
façade, basement and shower walls) described in IBC Section 2502 and shall not be
used in showers. It is known that MgO boards have been extensively used by some
proprietary wall products in the past. There are some parties who are still using this
product for formwork purposes.
For those who are using or have used MgO boards, they can expect to have very serious
durability problems leading to structural instability. The unfortunate fact is that the boards will
be hiding underlying problems associated with reinforced concrete infill walls until it is too late.
Check if your current or existing project accommodating FC Walls have been built
utilising MgO Boards.
17. Page 17 of 23
APPENDIX
1. AS3600 COMMENTARY – PAUL WALSH, CSIRO
2. AS3600 – 1994 COMMENTARY
18. Page 18 of 23
1. AS3600 COMMENTARY – PAUL WALSH, CSIRO