TLE 10 week 2 - Use of Hand Tools and Equipment in Computer.pptx
•Download as PPTX, PDF•
0 likes•674 views
This document lists and describes various hardware tools used for computer hardware servicing and maintenance. It discusses electro-static discharge (ESD) tools like anti-static wrist straps and mats used to prevent static electricity damage. It also outlines different types of hand tools including screwdrivers, pliers and tweezers. Cleaning tools like compressed air and lint-free clothes are also noted. Finally, diagnostic tools such as multimeters and loopback adapters used for testing computer components are covered.
Report
Share
Report
Share
Recommended
Use of tools in pc hardware servicing
As an aspiring technician, it is very important to know the different components of a computer system.
Handtools
This document provides an overview of the proper use of hand tools for computer hardware servicing. It defines various tools and groups them into four categories: electro-static discharge tools to prevent static damage, hand tools that can be manually or electrically operated, cleaning tools to maintain components, and diagnostic tools to test circuits and functionality. The document stresses safely selecting the right tool for each task and taking precautions such as using anti-static wrist straps, mats, and properly maintaining tools.
ESD TOOLS.pptx
Electro-Static Discharge (ESD) tools are used to safely discharge static electricity and protect electronic components from electrostatic discharge events. Common ESD tools include grounding cords, antistatic tools, antistatic gloves, ESD rubber matting, and antistatic clothing. These tools work to dissipate static electricity and prevent its buildup by providing conductive paths to ground potential. Proper use of ESD tools like connecting antistatic mats and wrist straps to grounding points helps protect sensitive electronic equipment from damage due to static electricity.
COMPUTER HARDWARE TOOLS IN CHS AND CSS
Here is a draft matrix on computer maintenance plan:
COMPUTER MAINTENANCE PLAN
COMPONENTS TO CLEAN/REPAIR SCHEDULE Tools to use
Computer case Daily/Every other day Lint-free cloth, compressed air
Monitor Weekly Lint-free cloth
Keyboard Monthly Lint-free cloth
Mouse Weekly Lint-free cloth
Inside components of Processing Bi-annually/Annually Multimeter, compressed air, lint-free cloth
Unit
Hard drive Annually Compressed air
RAM Every 6 months Compressed air
Processor fan Every 6 months Compressed air
Power supply Every year Compressed air
Optical drive (CD/DVD ROM) Monthly Compressed
Computer System Servicing Hand Tools
The document discusses various hand tools used for repairing computers and other devices, including screwdrivers, pliers, wire cutters, tweezers, and flashlights. It explains what each tool is used for, such as using philips head screwdrivers for screws with crosshead slots or needle-nose pliers for holding small parts. The document also provides examples of how and when to use different tools, like using a flashlight to illuminate hard to see areas or wire cutters for cutting wires. It emphasizes the importance of using the proper hand tools to fix computer components and encourages applying these tools to daily life.
Use of tools in PC hardware servicing
This document discusses various tools used for PC hardware servicing. It describes electro-static discharge tools like anti-static wrist straps and mats used to prevent electrostatic damage. It also outlines different types of common hand tools used for hardware maintenance like screwdrivers, pliers, and part retrievers. Additionally, it mentions cleaning tools such as compressed air and lint-free cloths for cleaning components safely. Finally, it briefly discusses diagnostic tools including multimeters and loopback adapters used for testing computer circuits and ports.
Computer hardware servicing lesson 2:Perform Mensuration And Calculation
This document provides information about computer hardware servicing and digital presentation. It defines common computer terms like bit, byte, booting, electronic storage, interfaces, laser, magnetic storage, memory modules, operating systems, and optical storage media. It also describes different types of computer hardware like hard disk drives, floppy drives, optical drives, external flash drives, and drive interfaces. The document includes exercises to match terms with definitions and convert decimal numbers to binary.
Install computer system,devices and peripherals
This document provides step-by-step instructions for installing computer hardware components and peripherals. It begins with disassembling a PC by unplugging all cables, removing screws from the case, and taking out components like the motherboard, CPU fan, power supply, drives, and RAM. It then describes reassembling the PC by installing these components in reverse order. Additional steps include connecting peripherals like the monitor, keyboard, mouse, and network cable to the appropriate ports. The overall goal is to teach readers how to independently assemble and disassemble a personal computer.
Recommended
Use of tools in pc hardware servicing
As an aspiring technician, it is very important to know the different components of a computer system.
Handtools
This document provides an overview of the proper use of hand tools for computer hardware servicing. It defines various tools and groups them into four categories: electro-static discharge tools to prevent static damage, hand tools that can be manually or electrically operated, cleaning tools to maintain components, and diagnostic tools to test circuits and functionality. The document stresses safely selecting the right tool for each task and taking precautions such as using anti-static wrist straps, mats, and properly maintaining tools.
ESD TOOLS.pptx
Electro-Static Discharge (ESD) tools are used to safely discharge static electricity and protect electronic components from electrostatic discharge events. Common ESD tools include grounding cords, antistatic tools, antistatic gloves, ESD rubber matting, and antistatic clothing. These tools work to dissipate static electricity and prevent its buildup by providing conductive paths to ground potential. Proper use of ESD tools like connecting antistatic mats and wrist straps to grounding points helps protect sensitive electronic equipment from damage due to static electricity.
COMPUTER HARDWARE TOOLS IN CHS AND CSS
Here is a draft matrix on computer maintenance plan:
COMPUTER MAINTENANCE PLAN
COMPONENTS TO CLEAN/REPAIR SCHEDULE Tools to use
Computer case Daily/Every other day Lint-free cloth, compressed air
Monitor Weekly Lint-free cloth
Keyboard Monthly Lint-free cloth
Mouse Weekly Lint-free cloth
Inside components of Processing Bi-annually/Annually Multimeter, compressed air, lint-free cloth
Unit
Hard drive Annually Compressed air
RAM Every 6 months Compressed air
Processor fan Every 6 months Compressed air
Power supply Every year Compressed air
Optical drive (CD/DVD ROM) Monthly Compressed
Computer System Servicing Hand Tools
The document discusses various hand tools used for repairing computers and other devices, including screwdrivers, pliers, wire cutters, tweezers, and flashlights. It explains what each tool is used for, such as using philips head screwdrivers for screws with crosshead slots or needle-nose pliers for holding small parts. The document also provides examples of how and when to use different tools, like using a flashlight to illuminate hard to see areas or wire cutters for cutting wires. It emphasizes the importance of using the proper hand tools to fix computer components and encourages applying these tools to daily life.
Use of tools in PC hardware servicing
This document discusses various tools used for PC hardware servicing. It describes electro-static discharge tools like anti-static wrist straps and mats used to prevent electrostatic damage. It also outlines different types of common hand tools used for hardware maintenance like screwdrivers, pliers, and part retrievers. Additionally, it mentions cleaning tools such as compressed air and lint-free cloths for cleaning components safely. Finally, it briefly discusses diagnostic tools including multimeters and loopback adapters used for testing computer circuits and ports.
Computer hardware servicing lesson 2:Perform Mensuration And Calculation
This document provides information about computer hardware servicing and digital presentation. It defines common computer terms like bit, byte, booting, electronic storage, interfaces, laser, magnetic storage, memory modules, operating systems, and optical storage media. It also describes different types of computer hardware like hard disk drives, floppy drives, optical drives, external flash drives, and drive interfaces. The document includes exercises to match terms with definitions and convert decimal numbers to binary.
Install computer system,devices and peripherals
This document provides step-by-step instructions for installing computer hardware components and peripherals. It begins with disassembling a PC by unplugging all cables, removing screws from the case, and taking out components like the motherboard, CPU fan, power supply, drives, and RAM. It then describes reassembling the PC by installing these components in reverse order. Additional steps include connecting peripherals like the monitor, keyboard, mouse, and network cable to the appropriate ports. The overall goal is to teach readers how to independently assemble and disassemble a personal computer.
CSS L05 - Computer System Assembly
The document provides step-by-step instructions for assembling a computer system. It discusses 11 steps: installing the CPU; heat sink and fan; RAM; motherboard; power supply; hard drive; optical drive; expansion cards; cables; checking and testing; and installing the operating system and drivers. The goal is to learn how to properly assemble internal computer hardware and install an operating system.
Hazard
The document discusses occupational health and safety practices when working with computer hardware and servicing. It outlines four main hazards: physical, mechanical, chemical, and electric shock. Physical hazards include tripping over cables or tools left on ladders. Mechanical hazards involve moving parts that could cut or pinch skin. Chemical hazards are from cleaning solvents and printer cartridges. Electric shock hazard is the greatest when working inside equipment that is plugged in, as voltages can be lethal. Proper safety gear, training, identifying hazards, and making risk assessments are emphasized.
Computer Hardware-servicing-learning-module
ESD Tools:
1. Anti-static wrist strap
2. Anti-static mat
Hand Tools:
3. Flat head screwdriver
4. Philips head screwdriver
5. Torx screwdriver
6. Hex driver
7. Needle-nose plier
8. Wire cutter
9. Tweezers
10. Part retriever
11. Flashlight
Cleaning Tools:
12. Lint-free cloth
13. Compressed air
14. Cable ties
Diagnostic Tools:
15. Multimeter
16. Loopback Adapter
Sim in ICT four categories of pc hardware servicing hardware tools
This document provides information about the four categories of PC hardware servicing tools:
1. Electro-Static Discharge (ESD) tools such as anti-static wrist straps and mats which prevent static electricity damage.
2. Hand tools including various types of screwdrivers, pliers, and cutters for hardware installation and repair.
3. Cleaning tools like lint-free cloths and compressed air for removing dust and debris.
4. Diagnostic tools including multimeters, loopback adapters, and parts organizers for testing computer components and organizing small parts.
Proper tool selection
This document discusses proper tool selection for repairing hardware. It states that the first steps are to understand the tasks needed and plan the sequence. The best tool for each task requires training and following manufacturer instructions. All necessary tools and parts should be obtained. Tools should only be used as intended and instructions followed for safety. The document then describes categories of hardware tools including electro-static discharge tools, hand tools, cleaning tools, and diagnostic tools. Examples are provided for common tools in each category.
Use of hand tools
The document discusses proper use of hand tools for computer system servicing. It identifies different categories of hardware tools including ESD tools, hand tools, cleaning tools, and diagnostic tools. It emphasizes following safety guidelines when using tools to prevent injuries and equipment damage. Proper documentation of repairs using reference tools is also covered.
ICT: Computer Hardware Services - Lesson 1 use hand tools by Je-Jireh Silva
The document defines terms related to computer hardware tools and components. It discusses electrostatic discharge tools like anti-static wrist straps and mats. It also describes various hand tools used for hardware repairs, such as screwdrivers, pliers, and flashlights. Finally, it covers cleaning tools like lint-free cloths, compressed air, cable ties, and parts organizers used to maintain computer equipment. The overall document provides definitions and examples of common hardware tools used for computer maintenance and repair.
Computer hardware servicing 7
This document discusses tools used in computer hardware servicing. It defines terms related to tools and hardware and categorizes hardware tools into electro-static discharge tools, hand tools, cleaning tools, and diagnostic tools. It provides examples of common tools in each category and their purposes, such as using anti-static wrist straps and mats to prevent electrostatic discharge, screwdrivers and pliers for assembly and disassembly, compressed air and lint-free cloths for cleaning, and multimeters and loopback adapters for diagnostics. The document emphasizes tool selection, safe use, and maintenance to properly service computer hardware.
Lesson 3 using hand tools
The document discusses proper use of various hand tools for repairing computer hardware. It describes electrostatic discharge tools like anti-static wrist straps and mats that prevent static electricity damage. Hand tools discussed include screwdrivers, pliers, and part retrievers. Cleaning tools mentioned are lint-free cloths, compressed air, and cable ties. Diagnostic tools covered are multimeters and loopback adapters. Guidelines are provided for safe use of these tools, such as connecting wrist straps to the computer chassis and not overtightening screws. Cautions include not using magnetized tools near electronics and checking for issues if excessive force is needed.
EIM 7/8 Lesson 2: Perform Mensuration and Calculation
LEARNING OUTCOMES:
* explain the basic concept of a system of measurement;
* perform measurement and calculation about electrical works;
* observe safety precautions in handling electrical measuring tools and instruments.
This Lesson Includes:
* System of Measurement
* Basic Unit Conversions
* The Multitester
* Resistance Reading
Computer hardware servicing practice occupational health and safety procedure
Computer hardware servicing practice occupational health and safety procedure *don't forget to leave any comments
K to 12 PC Hardware Servicing Learning Module
This document provides a learning module on computer hardware servicing for grades 7 and 8 in the Philippines. It covers four key lessons: (1) using hand tools, (2) performing calculations and measurements, (3) preparing and interpreting technical drawings, and (4) practicing occupational health and safety. Each lesson aims to achieve several learning outcomes and provides materials, activities, and assessments to help students meet the defined performance standards. The overall goal is to introduce students to the field of computer hardware servicing and prepare them for a potential certification in that area.
CSS L01 - Introduction to Computer System Servicing (NCII)
The document provides information about Computer Systems Servicing (CSS) NCII. It begins by explaining how CSS NCII upgraded and expanded upon the previous Computer Hardware Servicing (CHS) NCII qualification. The document then outlines the key differences between CHS NCII and CSS NCII, noting the expanded modules and competencies covered in CSS NCII. It proceeds to discuss occupational safety and health policies and procedures for computer system servicing, listing 12 specific safety guidelines to follow.
Prepare and Interpret Technical Drawing.pptx
Technical drawings are detailed diagrams that convey how objects function and are constructed. Engineers, contractors, and electricians use these drawings as guides. A flowchart uses graphic symbols to depict the steps in a process and is also called a flow diagram. The key elements of a flowchart are: terminators that mark the start and end, processes that represent actions, decisions shown as diamonds, and arrow lines that show the flow direction from top to bottom.
TLE-IA Consumer Electronics Servicing Curriculum Guide
This document outlines a curriculum for an exploratory and introductory course in consumer electronics servicing for grades 7 and 8 students, and a specialization course for grade 9 students. The courses cover key competencies including using tools, performing calculations, interpreting technical drawings, observing safety procedures, and more. The grade 9 course focuses on assembling and disassembling consumer electronics and maintaining appliances. Both courses aim to provide an understanding of concepts, skills, and career opportunities in the field of consumer electronics servicing.
Perform mensuration and calculation
A multimeter is an electronic measuring device that combines the functions of a voltmeter, ammeter, and ohmmeter. It allows electricians to accurately measure voltage, current, and resistance. There are two main types: analog multimeters display measurements using a pointer on a scale, while digital multimeters display results numerically using an LED screen. A multimeter has various parts that perform specific functions like selecting the measurement type and adjusting readings.
TLE - COMPUTER SYSTEMS SERVICING - HAND TOOLS
The document discusses hand tools used for computer system servicing. It identifies the most essential learning competency as identifying and selecting appropriate hand tools according to task requirements. It groups hardware tools into four categories: electro-static discharge tools to protect from static electricity; hand tools used manually or electrically; cleaning tools; and diagnostic tools. Examples of specific hand tools are given for each category, including anti-static wrist straps, screwdrivers, pliers, wire strippers, tweezers, and diagnostic tools.
CSS L03 - Mensuration and Calculation in CSS
This document discusses digital representation and binary conversion. It defines a bit as the basic unit of data in computing and explains how ASCII uses binary codes to represent letters, numbers, and characters. It then demonstrates how to convert between decimal and binary numbers through long division and provides an example of converting 25 to its binary equivalent of 11001. Finally, it includes tables defining bytes, kilobytes, megabytes, gigabytes and terabytes in terms of bits and bytes.
Configure Computer System and Network
The document provides information on safely configuring computer systems and networks. It discusses safety precautions when using ladders and working with cables. When configuring systems, the combination of hardware and software must be set up. The document also outlines dangers of working with fiber optic cables, including harmful chemicals, sharp tools, invisible light that can burn eyes, and glass shards. Proper safety equipment like gloves and glasses should always be worn when working with fiber optic cables.
K-12 Module in TLE 8 (Electrical) 3rd Grading
This document provides an electrical installation and maintenance learning module for grades 7 and 8 in the Philippines. It covers 5 lessons: 1) preparing electrical supplies, materials, and tools; 2) performing mensuration and calculations; 3) interpreting technical drawings and plans; 4) maintaining tools and equipment; and 5) practicing occupational safety and health. Each lesson defines learning outcomes and performance standards to build competencies in electrical installation and maintenance. The module guides students through learning activities, self-checks, demonstrations, and assessments to achieve the goals of the exploratory course.
Computer harware serving information communication and technology lesson 2
This document provides an overview of the tools needed for hardware servicing and repair of PCs. It discusses electro-static discharge tools like anti-static wrist straps and mats to prevent static damage. It also outlines categories of hand tools, cleaning tools, and diagnostic tools. Specific tools are described within each category along with proper usage of electro-static discharge tools, hand tools, and cleaning materials when servicing hardware.
CHS Tools and Materials.pptx
The document discusses tools and safety precautions for working with computer hardware. It describes four categories of hardware tools: electro-static discharge (ESD) tools to prevent static electricity damage, hand tools for assembly and installation, cleaning tools, and diagnostic tools. Specific tools are defined within each category. The document also provides guidelines for proper use of ESD tools like antistatic mats and wrist straps, as well as safety precautions for using hand tools and cleaning materials. Personal protective equipment is recommended, such as goggles, rubber soled shoes, aprons and gloves to protect against electrical, chemical and other hazards.
More Related Content
What's hot
CSS L05 - Computer System Assembly
The document provides step-by-step instructions for assembling a computer system. It discusses 11 steps: installing the CPU; heat sink and fan; RAM; motherboard; power supply; hard drive; optical drive; expansion cards; cables; checking and testing; and installing the operating system and drivers. The goal is to learn how to properly assemble internal computer hardware and install an operating system.
Hazard
The document discusses occupational health and safety practices when working with computer hardware and servicing. It outlines four main hazards: physical, mechanical, chemical, and electric shock. Physical hazards include tripping over cables or tools left on ladders. Mechanical hazards involve moving parts that could cut or pinch skin. Chemical hazards are from cleaning solvents and printer cartridges. Electric shock hazard is the greatest when working inside equipment that is plugged in, as voltages can be lethal. Proper safety gear, training, identifying hazards, and making risk assessments are emphasized.
Computer Hardware-servicing-learning-module
ESD Tools:
1. Anti-static wrist strap
2. Anti-static mat
Hand Tools:
3. Flat head screwdriver
4. Philips head screwdriver
5. Torx screwdriver
6. Hex driver
7. Needle-nose plier
8. Wire cutter
9. Tweezers
10. Part retriever
11. Flashlight
Cleaning Tools:
12. Lint-free cloth
13. Compressed air
14. Cable ties
Diagnostic Tools:
15. Multimeter
16. Loopback Adapter
Sim in ICT four categories of pc hardware servicing hardware tools
This document provides information about the four categories of PC hardware servicing tools:
1. Electro-Static Discharge (ESD) tools such as anti-static wrist straps and mats which prevent static electricity damage.
2. Hand tools including various types of screwdrivers, pliers, and cutters for hardware installation and repair.
3. Cleaning tools like lint-free cloths and compressed air for removing dust and debris.
4. Diagnostic tools including multimeters, loopback adapters, and parts organizers for testing computer components and organizing small parts.
Proper tool selection
This document discusses proper tool selection for repairing hardware. It states that the first steps are to understand the tasks needed and plan the sequence. The best tool for each task requires training and following manufacturer instructions. All necessary tools and parts should be obtained. Tools should only be used as intended and instructions followed for safety. The document then describes categories of hardware tools including electro-static discharge tools, hand tools, cleaning tools, and diagnostic tools. Examples are provided for common tools in each category.
Use of hand tools
The document discusses proper use of hand tools for computer system servicing. It identifies different categories of hardware tools including ESD tools, hand tools, cleaning tools, and diagnostic tools. It emphasizes following safety guidelines when using tools to prevent injuries and equipment damage. Proper documentation of repairs using reference tools is also covered.
ICT: Computer Hardware Services - Lesson 1 use hand tools by Je-Jireh Silva
The document defines terms related to computer hardware tools and components. It discusses electrostatic discharge tools like anti-static wrist straps and mats. It also describes various hand tools used for hardware repairs, such as screwdrivers, pliers, and flashlights. Finally, it covers cleaning tools like lint-free cloths, compressed air, cable ties, and parts organizers used to maintain computer equipment. The overall document provides definitions and examples of common hardware tools used for computer maintenance and repair.
Computer hardware servicing 7
This document discusses tools used in computer hardware servicing. It defines terms related to tools and hardware and categorizes hardware tools into electro-static discharge tools, hand tools, cleaning tools, and diagnostic tools. It provides examples of common tools in each category and their purposes, such as using anti-static wrist straps and mats to prevent electrostatic discharge, screwdrivers and pliers for assembly and disassembly, compressed air and lint-free cloths for cleaning, and multimeters and loopback adapters for diagnostics. The document emphasizes tool selection, safe use, and maintenance to properly service computer hardware.
Lesson 3 using hand tools
The document discusses proper use of various hand tools for repairing computer hardware. It describes electrostatic discharge tools like anti-static wrist straps and mats that prevent static electricity damage. Hand tools discussed include screwdrivers, pliers, and part retrievers. Cleaning tools mentioned are lint-free cloths, compressed air, and cable ties. Diagnostic tools covered are multimeters and loopback adapters. Guidelines are provided for safe use of these tools, such as connecting wrist straps to the computer chassis and not overtightening screws. Cautions include not using magnetized tools near electronics and checking for issues if excessive force is needed.
EIM 7/8 Lesson 2: Perform Mensuration and Calculation
LEARNING OUTCOMES:
* explain the basic concept of a system of measurement;
* perform measurement and calculation about electrical works;
* observe safety precautions in handling electrical measuring tools and instruments.
This Lesson Includes:
* System of Measurement
* Basic Unit Conversions
* The Multitester
* Resistance Reading
Computer hardware servicing practice occupational health and safety procedure
Computer hardware servicing practice occupational health and safety procedure *don't forget to leave any comments
K to 12 PC Hardware Servicing Learning Module
This document provides a learning module on computer hardware servicing for grades 7 and 8 in the Philippines. It covers four key lessons: (1) using hand tools, (2) performing calculations and measurements, (3) preparing and interpreting technical drawings, and (4) practicing occupational health and safety. Each lesson aims to achieve several learning outcomes and provides materials, activities, and assessments to help students meet the defined performance standards. The overall goal is to introduce students to the field of computer hardware servicing and prepare them for a potential certification in that area.
CSS L01 - Introduction to Computer System Servicing (NCII)
The document provides information about Computer Systems Servicing (CSS) NCII. It begins by explaining how CSS NCII upgraded and expanded upon the previous Computer Hardware Servicing (CHS) NCII qualification. The document then outlines the key differences between CHS NCII and CSS NCII, noting the expanded modules and competencies covered in CSS NCII. It proceeds to discuss occupational safety and health policies and procedures for computer system servicing, listing 12 specific safety guidelines to follow.
Prepare and Interpret Technical Drawing.pptx
Technical drawings are detailed diagrams that convey how objects function and are constructed. Engineers, contractors, and electricians use these drawings as guides. A flowchart uses graphic symbols to depict the steps in a process and is also called a flow diagram. The key elements of a flowchart are: terminators that mark the start and end, processes that represent actions, decisions shown as diamonds, and arrow lines that show the flow direction from top to bottom.
TLE-IA Consumer Electronics Servicing Curriculum Guide
This document outlines a curriculum for an exploratory and introductory course in consumer electronics servicing for grades 7 and 8 students, and a specialization course for grade 9 students. The courses cover key competencies including using tools, performing calculations, interpreting technical drawings, observing safety procedures, and more. The grade 9 course focuses on assembling and disassembling consumer electronics and maintaining appliances. Both courses aim to provide an understanding of concepts, skills, and career opportunities in the field of consumer electronics servicing.
Perform mensuration and calculation
A multimeter is an electronic measuring device that combines the functions of a voltmeter, ammeter, and ohmmeter. It allows electricians to accurately measure voltage, current, and resistance. There are two main types: analog multimeters display measurements using a pointer on a scale, while digital multimeters display results numerically using an LED screen. A multimeter has various parts that perform specific functions like selecting the measurement type and adjusting readings.
TLE - COMPUTER SYSTEMS SERVICING - HAND TOOLS
The document discusses hand tools used for computer system servicing. It identifies the most essential learning competency as identifying and selecting appropriate hand tools according to task requirements. It groups hardware tools into four categories: electro-static discharge tools to protect from static electricity; hand tools used manually or electrically; cleaning tools; and diagnostic tools. Examples of specific hand tools are given for each category, including anti-static wrist straps, screwdrivers, pliers, wire strippers, tweezers, and diagnostic tools.
CSS L03 - Mensuration and Calculation in CSS
This document discusses digital representation and binary conversion. It defines a bit as the basic unit of data in computing and explains how ASCII uses binary codes to represent letters, numbers, and characters. It then demonstrates how to convert between decimal and binary numbers through long division and provides an example of converting 25 to its binary equivalent of 11001. Finally, it includes tables defining bytes, kilobytes, megabytes, gigabytes and terabytes in terms of bits and bytes.
Configure Computer System and Network
The document provides information on safely configuring computer systems and networks. It discusses safety precautions when using ladders and working with cables. When configuring systems, the combination of hardware and software must be set up. The document also outlines dangers of working with fiber optic cables, including harmful chemicals, sharp tools, invisible light that can burn eyes, and glass shards. Proper safety equipment like gloves and glasses should always be worn when working with fiber optic cables.
K-12 Module in TLE 8 (Electrical) 3rd Grading
This document provides an electrical installation and maintenance learning module for grades 7 and 8 in the Philippines. It covers 5 lessons: 1) preparing electrical supplies, materials, and tools; 2) performing mensuration and calculations; 3) interpreting technical drawings and plans; 4) maintaining tools and equipment; and 5) practicing occupational safety and health. Each lesson defines learning outcomes and performance standards to build competencies in electrical installation and maintenance. The module guides students through learning activities, self-checks, demonstrations, and assessments to achieve the goals of the exploratory course.
What's hot (20)
Sim in ICT four categories of pc hardware servicing hardware tools
Sim in ICT four categories of pc hardware servicing hardware tools
ICT: Computer Hardware Services - Lesson 1 use hand tools by Je-Jireh Silva
ICT: Computer Hardware Services - Lesson 1 use hand tools by Je-Jireh Silva
EIM 7/8 Lesson 2: Perform Mensuration and Calculation
EIM 7/8 Lesson 2: Perform Mensuration and Calculation
Computer hardware servicing practice occupational health and safety procedure
Computer hardware servicing practice occupational health and safety procedure
CSS L01 - Introduction to Computer System Servicing (NCII)
CSS L01 - Introduction to Computer System Servicing (NCII)
TLE-IA Consumer Electronics Servicing Curriculum Guide
TLE-IA Consumer Electronics Servicing Curriculum Guide
Similar to TLE 10 week 2 - Use of Hand Tools and Equipment in Computer.pptx
Computer harware serving information communication and technology lesson 2
This document provides an overview of the tools needed for hardware servicing and repair of PCs. It discusses electro-static discharge tools like anti-static wrist straps and mats to prevent static damage. It also outlines categories of hand tools, cleaning tools, and diagnostic tools. Specific tools are described within each category along with proper usage of electro-static discharge tools, hand tools, and cleaning materials when servicing hardware.
CHS Tools and Materials.pptx
The document discusses tools and safety precautions for working with computer hardware. It describes four categories of hardware tools: electro-static discharge (ESD) tools to prevent static electricity damage, hand tools for assembly and installation, cleaning tools, and diagnostic tools. Specific tools are defined within each category. The document also provides guidelines for proper use of ESD tools like antistatic mats and wrist straps, as well as safety precautions for using hand tools and cleaning materials. Personal protective equipment is recommended, such as goggles, rubber soled shoes, aprons and gloves to protect against electrical, chemical and other hazards.
CSS W1.pptx
The document provides guidance on selecting, using, maintaining, and storing various hand tools needed for computer system servicing. It discusses four categories of tools: hand tools, electro-static discharge tools, diagnostic tools, and cleaning tools. Specific tools are identified for different tasks like screwing, soldering, crimping wires. Proper use and maintenance of tools is emphasized to keep them in safe and usable condition and prevent damage to electronic components. Tools should be stored properly and maintained according to manufacturer guidelines.
Q1 Proper Use of Computer Hardware Tools.pptx
The document provides instructions for properly using electrostatic discharge (ESD) tools and cleaning computer components. Some key points covered include:
1) An antistatic wrist strap is worn to equalize electrical charge between the user and computer equipment.
2) Screwdrivers like flat head, Phillips head, and hex drivers are used to tighten and loosen corresponding screw types.
3) Compressed air should be used at least four inches from components to blow away dust, and isopropyl alcohol cleans contacts on parts removed for cleaning.
Quiz in Tools in Computer System Servicing.pptx
Multimeter, network cable tester, zip ties, compressed air, Phillips head screwdriver, nut driver, flat head screwdriver, anti-static wrist strap, tweezers, cotton swabs, small parts tray, wire strippers. These tools are used for testing components, organizing cables, removing dust, fastening screws and nuts, retrieving small parts, cleaning components, and handling wires when servicing computer systems.
CREATIVE TECHNOLOGY 7 QI-L3
The document provides information about maintaining hand tools, computer equipment, and electronic systems. It outlines four learning competencies, which are to identify different tools and their functions, work collaboratively to prepare a safety brochure, follow procedures for cleaning and simple repairs, and determine common malfunctions. The document defines various tools, including those for electrostatic discharge protection, hand tools, cleaning, and diagnostics. It also defines computer equipment and electronic systems.
CHS Tools
This document discusses tools used for computer hardware servicing. It defines tools and their purposes, including hand tools like screwdrivers, pliers and tweezers. Electro-static discharge tools like anti-static wrist straps and mats are recommended to prevent static electricity damage. Cleaning tools like compressed air and lint-free cloths help maintain components without scratching. Diagnostic tools like multimeters and loopback adapters test circuit integrity and port functionality. Maintaining properly functioning tools is important for safety and completing repairs on computer hardware.
Css 2 ndsem_q3_usedofhandtools 2222
This document provides information about computer hardware tools used in computer system servicing. It defines various tools categorized as ESD, hand, cleaning, and diagnostic tools. Examples are given for each type of tool along with descriptions of their proper uses and safety procedures. The objectives and terms are also defined. Interactive portions provide questions to test understanding of identifying different tools from images and their uses. Activities at the end instruct the learner to choose 5 tools to describe their uses and how to use them safely.
Computer Hand Tools_Presentation
This document provides information on tools used for computer system servicing. It defines key terms like hand tools, equipment, computer technician, and personal protective equipment. It groups various tools into categories of hand tools, electro-static discharge tools, cleaning tools, and diagnostic tools. Examples are given of common tools like screwdrivers, pliers, flashlights, tweezers, and compressed air. The document describes having students identify the appropriate tools for tasks like opening a system unit, checking voltage, and cleaning dust. It provides rubrics for evaluating students on tool selection accuracy, presentation, and cooperation. As an assignment, students are asked to research ways to clean a personal computer.
Use of Tools in PC Hardware
Here are the names of the tools presented in the document:
1. Antistatic wrist strap
2. Antistatic mat
3. Flat head screwdriver
4. Philips head screwdriver
5. Torx screwdriver
6. Hex driver
7. Needle-nose pliers
8. Wire cutter
9. Part retriever
10. Tweezers
11. Flashlight
12. Lint-free cloth
13. Compressed air
14. Cable ties
15. Parts organizer
16. Multimeter
17. Loopback adapter
Grade8_Q1-4_W1_HandTools.pdf
This document provides information about a module on using and maintaining hand tools for computer hardware servicing. It includes the development team who created the module, as well as copyright information. The module is divided into three topics: preparing hand tools, using appropriate hand tools and test equipment, and maintaining hand tools. It discusses the importance of selecting the proper tools for jobs and using tools safely.
OBTAIN TOOLS, EQUIPMENT AND TESTING DEVICES
A tool is a handheld device that aids in accomplishing a tasks. Tools range from a traditional metal cutting part of a machine to an element of a computer program that activates and controls a particular function.
Maintaining equipment and consumables ppt.pptx
Hardware and networking level II lecture note. Use this ppt for teaching learning only. Please upload related works if you have.
Proper tools selection
The document discusses proper tool selection and safe use for working on computers and electronics. It emphasizes the importance of understanding the task, selecting the appropriate tool for each job, and using tools only as intended by the manufacturer. A variety of common computer maintenance and repair tools are described, including electrostatic discharge tools to prevent static damage, hand tools like screwdrivers and pliers, cleaning tools like compressed air and swabs, and diagnostic tools like multimeters and loopback adapters. Proper tool selection and use is crucial for safety and completing tasks efficiently.
Hardware tools modified
The document discusses tools for working on computer hardware and preventing electrostatic discharge (ESD) damage. It provides pictures and descriptions of common hand tools like screwdrivers, pliers and tweezers. It also discusses ESD wrist straps, mats and proper procedures like grounding yourself to prevent static buildup. Compressed air and lint-free cloths are presented as options for cleaning internal components. The importance of having these various tools for computer repair and maintenance is highlighted.
Computer-hardware-tools PPT.pptx
1. The document discusses various tools used for computer hardware maintenance and repair, including flat head screwdrivers, needle-nose pliers, multi-meters, and anti-static wrist straps.
2. It explains that static electricity can damage computer equipment and that anti-static wrist straps and mats help control electrostatic discharge.
3. Cleaning tools like lint-free clothes and compressed air are also discussed for safely cleaning internal computer components without leaving debris.
Grade 7 Detailed Lesson Plan 2
The document provides a detailed lesson plan on proper tool use for computer hardware servicing. It includes 7 objectives, 4 procedures, and assessment activities. The key points covered are:
1. Identifying appropriate tools for equalizing electrical charge, tightening screws, and tightening hex bolts.
2. Explaining proper use of antistatic wrist straps, antistatic mats, screwdrivers, and hex drivers.
3. Detailing cleaning procedures for computer cases, screens, components, keyboards, and mice using compressed air and cleaning solutions.
PROPER USE OF TOOLS.pptx
Proper use of tools in computer servicing will lead to the safety of the user and the tools used for servicing.
INPUT and OUTPUT devices in Information Communication Technology .pptx
INPUT DEVICES – Are compose of devices that accepts data and instructions from the user or from other computer system.
OUTPUT DEVICES – Is any piece of computer hardware that displays results after the computer has processed the unput data that has been entered.
Similar to TLE 10 week 2 - Use of Hand Tools and Equipment in Computer.pptx (20)
Computer harware serving information communication and technology lesson 2
Computer harware serving information communication and technology lesson 2
INPUT and OUTPUT devices in Information Communication Technology .pptx
INPUT and OUTPUT devices in Information Communication Technology .pptx
More from JohnKingjohnkingmond
6_2020_03_05!06_46_22_PM.pptx
This document provides instructions for installing Windows 7 operating system. It begins with minimum system requirements including a 1GHz processor, 1GB RAM for 32-bit or 2GB for 64-bit, and 16GB available storage. It then outlines the step-by-step installation process which includes booting from a DVD, selecting language and format options, accepting license terms, selecting a drive to install to, and completing post-installation setup. Basic applications that should be installed are also listed such as compression software, antivirus, browsers, and printers.
storage devices.pptx
This document discusses different types of storage devices including floppy diskettes, compact discs (CDs), digital versatile discs (DVDs), jump drives, USB flash drives, hard drives, LS-120 drives, and Zip drives. It notes that hard drives are usually the largest storage device in a computer and contain the operating system and most files, while other devices like floppy diskettes, CDs, DVDs, jump drives and Zip drives are used for portable or backup storage.
TLE 9 - GUESS THE TOOLS.pptx
The document lists the names of various tools that could be used for a group activity where participants guess the purpose of each tool. Some of the tools listed include a digital multimeter, anti-static wrist strap, compressed air, toner probe, automatic voltage regulator, tweezers, flat head screwdriver, loopback adapter, handheld vacuum, Phillips screwdriver, anti-static bag, uninterrupted power supply, anti-static mat, parts retriever, and needle nose pliers.
health 1.pptx
This document lists common internal and external stressors. Internal stressors include chronic worry, pessimism, negative self-talk, unrealistic expectations, perfectionism, rigid thinking and an all-or-nothing attitude. External stressors include major life changes, work or school, relationship difficulties, financial problems, children and family. Both internal and external stressors can lead to health issues like cancer, asthma, ulcers, diarrhea, strokes, migraines, cramps, infertility, allergies and heart attacks.
TLE – CSS 10 first quiz.pptx
The document contains a short quiz about operating systems with 15 multiple choice questions. The questions cover topics such as the purposes of operating systems, examples of operating systems, the difference between software and hardware, capabilities of operating systems like multitasking and multi-user functionality, common operating systems like Windows, MacOS, Linux, and Android, and icons associated with different operating systems.
computer basics demo.ppt
The document discusses the parts and components of a computer. It describes input devices like the keyboard and mouse, output devices like monitors and printers, and internal components like the central processing unit, memory, motherboard, and expansion cards. It also discusses storage devices, ports and connections, and how to use input devices like keyboards and mice. The document is intended to teach readers about the basic hardware that makes up a computer and its functions.
PPT-Final.pptx
This document discusses how to construct a table of specifications for test questions. It provides a 7-step process: 1) Determine number of test items, 2) List topics and time spent, 3) Calculate number of items per topic, 4) Round numbers, 5) Adjust totals, 6) Scatter items by cognitive level, 7) Allocate items. The purpose is to ensure tests are valid and cover appropriate content in a balanced way based on Bloom's taxonomy. Constructing a table of specifications helps improve test validity and identify question types needed.
MODULE 3.pptx
1) The document discusses learning the value of respect through understanding similarities and differences within families.
2) It prompts students to make a table listing the different duties of family members, including themselves, and to discuss with family members the importance of their roles in strengthening relationships, especially during challenges.
3) The activity aims to help students discover how having similar or different duties can unite their family and the importance of recognizing different roles in maintaining strong family relationships.
week 2.pptx
Students are asked to reflect on the changes they experienced from grade 7 to present and copy a template to write down their answers. They should describe changes they went through and also answer some processing questions about themselves.
FOR COPY MAPEH 10.pptx
The document discusses several key health issues and concerns in the Philippines at the national level, including consumer health laws, reproductive health, sexually transmitted infections, HIV/AIDS, substance use and abuse, and related legislation. It outlines objectives of the Consumer Act of the Philippines and the Traditional and Alternative Medicine Act. It also summarizes pillars of the Responsible Parenthood and Reproductive Health Act, reproductive health problems, findings from a youth sexuality study, the Philippine AIDS Prevention and Control Act, effects of gateway drugs, and provisions of the Comprehensive Dangerous Drugs Act and Tobacco Regulation Act.
HEALTH wk.5 q1.pptx
The document discusses the importance of health screenings and appraisals for students, which are conducted by school health personnel. This includes checking things like height, weight, vision, hearing, and blood pressure. It also explains how conditions like scoliosis are screened for and provides instructions for breast self-examinations.
film.pptx
Filmmaking involves entire teams of artists and technicians working collaboratively under a film director's supervision. Key roles include directors who envision the final artistic effect, actors who bring characters to life, cinematographers who capture scenes visually, and editors who assemble sequences to achieve desired emotional impacts. Several influential Filipino filmmakers like Lino Brocka, Ishmael Bernal, and Marilou Diaz-Abaya directed films addressing social issues, while genres like musicals and romances were initially popular.
GRADE 5 - M.pptx
This document contains the names and positions of education officials from the Department of Education in Region 1 Pangasinan. It also lists the names of 5 students from Manambong Sur Elementary School in Bayambang, Pangasinan along with their parents' names.
TLE 9 - Cookery (Week 4)mise en place.pptx
Mise en place refers to having all ingredients and tools prepared ahead of time before starting to cook. It is important in professional kitchens for efficiency and safety. Proper preparation involves assembling tools and ingredients, washing and cutting raw materials, and setting up equipment needed for recipes. Knife skills are also essential, including using the correct grip and knife for different tasks, as well as basic cuts like dice, julienne, brunoise, and batonnet. Being organized with mise en place allows cooks to focus on cooking and produce high quality results.
module1_computerbasics1 - Copy.ppt
This document provides an overview of Computer Basics 1, which includes two lessons on introductions to computers and common computer terminology. Lesson 1 defines the main parts of a computer including input, output, processing and storage devices. It describes how to use a keyboard and mouse. Lesson 2 defines key computer terms like hardware, operating systems, programs, data, and networks. It explains what the Internet is and differences between LAN and WAN networks. Practices are suggested for typing and using a mouse after Lesson 1.
cpu socket.pptx
The CPU socket is a portion of the motherboard that holds the CPU. There are different socket types used by Intel and AMD processors. Socket types include LGA sockets like LGA775 which are used by Intel Core 2 Duo processors and PGA sockets like Socket FM2 which is used by AMD Trinity APUs and supports DDR3 memory. Processor sockets differ in the chip manufacturer supported (Intel vs AMD), number of pins, and features including memory support and number of PCIe lanes.
elements of music - ppt overview.ppt
Music has been an important part of human culture since the beginning of recorded history. It plays a vital role in people's lives today through various media and activities. Music has elements including melody, tempo, dynamics, harmony, form, timbre, and rhythm. Melody is the tune, tempo is the speed, dynamics refer to volume, harmony involves two or more notes played together, form is the musical structure or pattern, timbre is the sound quality of instruments or voices, and rhythm encompasses the length of notes and rests. Understanding music's basic elements can help develop greater appreciation for music and culture.
TLE 10 - CSS (week 1 Day 1) ASSEMBLE COMPUTER HARDWARE.pptx
The document discusses different types of computers. It describes analog computers, which work with continuous values, digital computers which use binary and can perform calculations accurately, and hybrid computers which combine aspects of analog and digital. It also categorizes computers based on size and capability into supercomputers, mainframe computers, minicomputers, servers, and microcomputers. Supercomputers are the largest and most powerful, used for specialized tasks, while microcomputers are the most common type of personal computer.
TLE 9 - Cookery (Week 1) KITCHEN TOOLS AND EQUIPMENT.pptx
This document provides information about various kitchen tools and equipment. It begins by listing categories such as knife sets, measuring tools, strainers, cookware, and other kitchen tools. Each category then describes the different types of tools within that category, identifying their common uses. The document aims to familiarize the reader with the different tools and equipment used in the kitchen.
More from JohnKingjohnkingmond (20)
TLE 10 - CSS (week 1 Day 1) ASSEMBLE COMPUTER HARDWARE.pptx
TLE 10 - CSS (week 1 Day 1) ASSEMBLE COMPUTER HARDWARE.pptx
TLE 9 - Cookery (Week 1) KITCHEN TOOLS AND EQUIPMENT.pptx
TLE 9 - Cookery (Week 1) KITCHEN TOOLS AND EQUIPMENT.pptx
Recently uploaded
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcHow to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaThe Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdA Survey of Techniques for Maximizing LLM Performance.pptx
A Survey of Techniques for Maximizing LLM Performance
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Types of Herbal Cosmetics its standardization.
Physiology and chemistry of skin and pigmentation, hairs, scalp, lips and nail, Cleansing cream, Lotions, Face powders, Face packs, Lipsticks, Bath products, soaps and baby product,
Preparation and standardization of the following : Tonic, Bleaches, Dentifrices and Mouth washes & Tooth Pastes, Cosmetics for Nails.
Recently uploaded (20)
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
A Survey of Techniques for Maximizing LLM Performance.pptx
A Survey of Techniques for Maximizing LLM Performance.pptx
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
TLE 10 week 2 - Use of Hand Tools and Equipment in Computer.pptx
- 1. What do you observe in this slide?
- 2. Hardware Tools used in computer hardware servicing, they are as follows A. Electro – static Discharge(ESD) tools B. Hand Tools C. Cleaning Tools D.Diagnostic Tools
- 3. Electro – Static Discharge (ESD) Tools Static electricity is easily generated by friction on carpets, tile flooring, clothing, hair, fabric, and etc. The friction of moving air alone will charge suspended particles and cause the buildup of static electrical charges on people and objects in the environment. Static electricity can damage computer sensitive parts. To avoid that from happening we will use ESD Tools to discharge electro - static electricity before opening/fixing the computer.
- 4. Electro – Static Discharge (ESD) Tools • Anti – static wrist strap • Anti – static mat or ground mat
- 5. 1. Anti – static wrist strap is use as safety gear to keep the user grounded and keep him from harm and computer components from being damage caused by buildup of static electricity or ESD.
- 6. 2. Anti – Static mat or ground mat Is used by laying mat on the working table and clipping the cord to the computer case. This way the mat will to absorb static electricity, which can cause damage to computer components.
- 7. B. Hand Tools A hand tool is a device for performing work on a material or a physical system using only hands. The hand tools can be manually used employing force, or electrically powered, using electrical current.
- 8. 1. Needle nose Pliers, also called long nose pliers are used for gripping, bending, re – positioning and stripping insulated wire.
- 9. 2. Wire cutter Is use to cut and strip insulated wires.
- 10. 3. Flat head screwdriver Used to loosen or tighten slotted screws.
- 11. 4.Phillips head screwdriver Used to loosen or tighten crosshead screws.
- 12. 5. Torx screwdriver Used to loosen or tighten screws that have a star – like depression on the top, a feature that is mainly found on laptop.
- 13. 6. Hex driver or nut driver Is used to tighten nuts in the same way that screwdriver tightens screws.
- 14. 7.Tweezers Used to manipulate small parts.
- 15. 8. Part Retriever Use to retrieve small parts from location that are to small for your hand to fit.
- 16. 9. Flashlight Use to light up areas that you cannot see well.
- 17. C. Cleaning Tools Having the appropriate cleaning tools is essential when maintaining or repairing computers. Using these tools ensures that computer components are not damaged during cleaning.
- 18. 1. Lint-free cloth used to clean different computer components without scratching or leaving debris.
- 19. 2. Compressed air used to blow away dust and debris from different computer parts without touching the components.
- 20. 3. Cable ties used to bundle cables neatly inside and outside of a computer.
- 21. 4. Parts organizer used to hold screw, jumpers, fasteners and other small parts and prevents them from getting mixed together.
- 22. D. Diagnostic Tools Computers are easier to use and more dependable with each new generation of hardware and operating system update, but that doesn't mean they're problem-free.
- 23. 1. Multimeter used to test the integrity of circuits and the quality of electricity in computer components.
- 24. 2. Loopback Adapter used to test the functionality of computer ports.