Sim in ict four categories of pc hardware servicing hardware tools

1. Louie F. Rivera
STRATEGICINTERVENTION
MATERIALS(SIM)IN
PERSONALCOMPUTER
HARDWARESERVICING

2. Louie F. Rivera
TLE-ICT
TOPIC:
PC HARDWARE
SERVICING TOOLS

3. Louie F. Rivera
TITLE CARD

4. Louie F. Rivera
Four Categories of PC Hardware Servicing
Hardware Tools
TASK:
Orientation of the four Categories of PC Hardware
Servicing Tools.
SUB TASK:
Illustrate and identify the four Categories of PC Hardware
Servicing Tool.

5. Louie F. Rivera
GUIDE CARD

6. Louie F. Rivera
1.Electro-Static Discharge (ESD) tools- Static electricity is easily
generated by friction on carpets, tile flooring, clothing, hair, fabric,
and etc. The friction of moving air alone will charge suspended
particles and cause the buildup of static electrical charges on
people and objects in the environment. Grounded antistatic work
mats used with antistatic wrist straps provide the most basic means
for the controlled discharge of electrostatic electricity.
Anti-static wrist strap – used to prevent ESD damage to
computer equipment.
Anti-static mat – used to stand on or place hardware on to
prevent static electricity from building up.

7. Louie F. Rivera
2.Hand tools- is a device for performing work on a material or a
physical system using only hands.
Flat head screwdriver – used to loosen or tighten slotted
screws.
Philips head screwdriver – used to loosen or tighten crosshead
screws.
Torx screwdriver - used to loosen or tighten screws that have a star-
like depression on the top, a feature that is mainly found on laptop.
Hex driver – sometimes called a nut driver, is used to tighten
nuts in the same way that a screwdriver tightens screws.

8. Louie F. Rivera
Needle-nose plier – used to hold small parts.
Wire cutter – used to strip and cut wires.
Tweezers – used to manipulate small parts.
Part retriever – used to retrieve parts from location that are
too small for your hand to fit.
Flashlight – used to light up areas that you cannot see well.

9. Louie F. Rivera
3.Cleaning tools- Having the appropriate cleaning tools is
essential when maintaining or repairing computers.
Lint-free cloth – used to clean different computer
components without scratching or leaving debris.
Compressed air – used to blow away dust and debris from
different computer parts without touching the components.
Cable ties – used to bundle cables neatly inside and outside of
a computer.

10. Louie F. Rivera
4.Diagnostic tools- Computers are easier to use and more
dependable with each new generation of hardware and operating
system update, but that does not mean they are problem-free.
Parts organizer – used to hold screw, jumpers, fasteners and
other small parts and prevents them from getting mixed together.
Multimeter – used to test the integrity of circuits and the quality of
electricity in computer components.
Loopback Adapter – used to test the functionality of computer
ports.

11. Louie F. Rivera
ACTIVITY
CARD

12. Louie F. Rivera
Group the picture below accordance to its category. Write ESD if the picture
belongs to Electro Static Discharge Tools, H for Hand tool, C for Cleaining tool, and D for
Diagnostic tools.
_________ _________ _________ _________ _________ _________
_________ _________ _________ _________ _________
_________ _________ _________ _________ _________
3 4 5
62
1
11
109
87
12 13 14 15
16

13. Louie F. Rivera
ASSESSMENT
CARD

14. Louie F. Rivera
I. Multiple Choice: Choose the letter of your choice.
1. Which tool is used for hardware to stand on to prevent static electricity from building up?
A. Anti-static mat B. Hex driver C. Philips head screwdriver D. Wire cutter
2. Which tool is used to loosen or tighten cross-head screws?
A. Anti-static mat B. Hex driver C. Philips head screwdriver D. Flat head screwdriver
3. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a screwdriver tightens screws?
A. Anti-static mat B. Hex driver C. Philips head screwdriver D. Wire cutter
4. Which tool is used to strip and cut wires?
A. Anti-static mat B. Hex driver C. Philips head screwdriver D. Wire cutter
5. The general condition of a person in all aspects.
A. Hazard B. Safety C. Risk D. Health
6. Which tool is used to clean different computer components without scratching or leaving debris?
A. Part Retriever B. Lint-free Cloth C. Cable ties D. Flat head screwdriver
7. Which tool is used to bundle cables neatly inside and outside of a computer?
A. Part Retriever B. Lint-free Cloth C. Cable ties D. Flat head screwdriver
8. Which tool is used to loosen or tighten slotted screws?
A. Part Retriever B. Lint-free Cloth C. Cable ties D. Flat head screwdriver
9. A situation that has the potential to harm the health and safety of people.
A. Hazard B. Safety C. Risk D. Health
10. Which tool is used to blow away dust and debris from different computer parts without touching the components?
A. Anti-static mat B. Hex driver C. Compressed air D. Wire cutter
11. A tool used to test the integrity of circuits and the quality of electricity in computer components.
A. Multimeter B. Hex driver C. Parts organizer D. Tweezers
12. It is used to test the functionality of computer ports.
A. Multimeter B. Loopback Adapter C. Parts organizer D. Tweezers
13. It is used to hold screw, jumpers, fasteners and other small parts and prevents them from getting mixed together.
A. Multimeter B. Loopback Adapter C. Parts organizer D. Tweezers
14. A tool used to manipulate small parts.
A. Multimeter B. Loopback Adapter C. Parts organizer D. Tweezers
15. A potential condition that a chosen action or activity causes.
A. Hazard B. Safety C. Risk D. Health

15. Louie F. Rivera
ENRICHMENT
CARD

16. Louie F. Rivera
Identify the picture and write what category and its name on the space
provide below.
1 2 3
7654
8 9 10

17. Louie F. Rivera
REFERENCE
CARD

18. Louie F. Rivera
 K TO 12 PC HARDWARE SERVICING LEARNING MODULE
 K TO 12 PC HARDWARE SERVICING TEACHER'S GUIDE

19. Louie F. Rivera
ANSWER KEY
CARD

20. Louie F. Rivera
Activity
1.Torx scew driver
2.Wire Cutter
3.Anti-static Wrist Strap
4.Part organizer
5.Loop back adapter
6. Part Retriever
7.Flat Head Screw Driver
8.Tweezers
9.Philip Head Screw Driver
10. Hex Driver
11. Flash Light
12. Lint Free Cloth
13. Multimeter
14. Anti-Static Mat
15. Needle-Nose Plier
16. Cable Ties
Assessment
1. A
2. C
3. B
4. D
5. D
6. B
7. C
8. D
9. A
10. C
11. A
12. B
13. C
14. D
15. C
Enrichment
1. Hand Tools/ Wire Cutter
2. ESD Tools/ Anti-Static Wrist Strap
3. Cleaning Tools/ Part Organizer
4. Hand Tools/ Tweezers
5. Hand Tools/ Philip Screw Driver
6. Hand Tools/ Hex Driver
7. Hand Tools/ Flash Light
8. Hand Tools/ Lint Free Cloth
9. Hand Tools/ Needle-Nose Plier
10. Diagnostic Tools/ Multimeter