This document discusses various types of camouflage techniques used in military applications. It describes camouflage materials that conceal objects by disguising them to blend in with the surrounding environment across different spectrums, including visible light, infrared, ultraviolet, thermal, and radar spectrums. The document also discusses different parameters that influence camouflage material properties and design considerations for camouflage textiles and composites.
Military Textiles
A textile material developed to fulfill the technical requirement of defense such as Camouflage, flameproof, ballistic cloths etc can be termed as military textiles. These are also called as defence Textile.
Military Textiles
A textile material developed to fulfill the technical requirement of defense such as Camouflage, flameproof, ballistic cloths etc can be termed as military textiles. These are also called as defence Textile.
Presentation on military textiles (Protective textiles)Md. Sirajul Islam
The slides contains information about military textiles. The history of military textiles, what type of fabric is used to make military textiles and the design, applications.
to overcome the problem of easily fire catching to fabrics
it will reduce the wealth loss and causing material saving as well as it will cause healthy environment without sudden damage due to fire
chemicals treated are chlorine bromine , and also the bad effects of flame retardants
presented " Textiles in Automobiles" in Faculty Development program organized by Department of Textile Engineering, Kumaraguru College of Technology Coimbatore on 25-11-2015.
Presentation on military textiles (Protective textiles)Md. Sirajul Islam
The slides contains information about military textiles. The history of military textiles, what type of fabric is used to make military textiles and the design, applications.
to overcome the problem of easily fire catching to fabrics
it will reduce the wealth loss and causing material saving as well as it will cause healthy environment without sudden damage due to fire
chemicals treated are chlorine bromine , and also the bad effects of flame retardants
presented " Textiles in Automobiles" in Faculty Development program organized by Department of Textile Engineering, Kumaraguru College of Technology Coimbatore on 25-11-2015.
Great Ideas! 2013 Idea Lab
Making Ideas Happen: A Strengths-Based Learning Experience
Don’t let your flash of brilliance fade away. Learn by doing in this session by taking the Appreciative Inquiry and G.R.O.W. methods out for a spin to better refine your great idea and articulate next steps to make it happen. Harness the support of your colleagues and community to bring your idea to life, and walk away with a plan to move your idea forward despite the resistance you might face.
Use of Textile for noise absorption application is a cost effective method which does not required additional energy source and acts as passive medium.
Computationally Efficient Methods for Sonar Image Denoising using Fractional ...CSCJournals
Sonar images produced due to the coherent nature of scattering phenomenon inherit a multiplicative component called speckle and contain almost homogeneous as well as textured regions with relatively rare edges. Speckle removal is a pre-processing step required in applications like the detection and classification of objects in the sonar image. In this paper computationally efficient Fractional Integral Mask algorithms to remove the speckle noise from sonar images is proposed. Riemann- Liouville definition of fractional calculus is used to create Fractional integral masks in eight directions. The use of a mask incorporated with the significant coefficients from the eight directional masks and a single convolution operation required in such case helps in obtaining the computational efficiency. The sonar image heterogeneous patch classification is based on a new proposed naive homogeneity index which depends on the texture strength of the patches and despeckling filters can be adjusted to these patches. The application of the mask convolution only to the selected patches again reduce the computational complexity. The non-homomorphic approach used in the proposed method avoids the undesired bias occurring in the traditional homomorphic approach. Experiments show that the mask size required directly depends on the fractional order. Mask size can be reduced for lower fractional orders thus ensuring the computation complexity reduction for lower orders. Experimental results substantiate the effectiveness of the despeckling method. The different non reference image performance evaluation criterion are used to evaluate the proposed method.
This presentation includes basis of lithography i.e. (photo-lithography e-beam lithography) in nano-lithography includes (AFM, Soft, NIL and DPN lithography)
Natural ageing of stabilized and unustabilized ldpe films used as greenhouses...eSAT Journals
Abstract
This article focuses on the study of both stabilized and unstabilized low-density polyethylene films aged under natural weathering in the middle of Morocco (Sidi Kacem city). The study was undertaken on three samples for each LDPE films: a new sample taken as reference; another exposed to outdoor weathering for one year; and a sample exposed for two years.
The outdoor exposure effects were followed by analysis of the total reflection Fourier transform infrared spectroscopy (ATR-FTIR). This technique provides information on the main chemical functions and evaluates the internal causes of natural ageing of our samples. The infrared spectra show the formation of hydroperoxides -O-OH, carbonyls >C=O, aliphatic esters R-(CO)-O-R, ether R-O-R, vinyl C=C, vinylidene >C=CH2 and trans-vinylene RHC=CRH in the amorphous regions. These compounds lead to initiate the mechanism of photo-oxidation of the unstabilized LDPE samples. Therefore, the increase in the formation of oxidation products into the aged samples (LDPEUS) indicates an accelerated degradation of these latter on climatic factors (UV, O2, humidity, rain ...). The UV stabilizer (free radicals scavengers) added to the formulation of LDPE films can delay the attack of the amorphous phase and prevent the formation of compounds that can cause and accelerate photo-oxidation. The results obtained by the infrared have been confirmed by observing the morphology of the samples with scanning electron microscopy technology (SEM).
Keywords: LDPE, Photo-oxidation, Natural ageing, UV stabilizer, ATR-FTIR, SEM
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar Kanvaria
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
2024.06.01 Introducing a competency framework for languag learning materials ...
The disguise textiles (camouflage) by vignesh dhanabalan
1. 1 Vignesh Dhanabalan M.Tech (Technical Textiles)
The Disguise Textiles
Author: Mr. Vignesh Dhanabalan [1]
, Miss Rashmi.M.Joshi [2]
and Daniel Karthik [3]
Email – vigneshdhanabalan@hotmail.com (Vignesh Dhanabalan)
Abstract
Security issues have become a high concern in the modern War world. In advancement
warfare techniques defense security system turns out to be a key factor. To disguise and deceive
the opponent is a tactical techniques employed is considered to be the best offence without any
physical war.
This camouflage technique has been a long stand in the defense world and many changes
have undergone to bring the best possible use of it. In the paper we have tried to bring in details
regarding what camouflage fabrics are, its manufacturing methods, the structure that determines
the better camouflage, the detection systems employed, deploying of the detection system by the
fabrics, the blending of materials to the environment, the advancement in camouflage system and
have winded up with details regarding the market concerns.
Keywords: Camouflage, Deploying, IR spectrum, Optical camouflage, Ultraviolet spectrum.
Introduction
Camouflage means to deceive or disguise and conceal minimizing the possibility of
detection (Concealment of personnel to avoid visual detection by eye or photography). In a
military sense it is used for a system that disguises forces and equipment against detection by
adversaries.
Camouflage materials have long been employed to conceal objects, personnel, and
equipment in various terrains from visual detection. Generally, such camouflage materials are
drapable sheets or net structures of varying size and shape and are solid color or dyed or printed
in multiple color patterns to simulate the coloration of the terrain in which the camouflage is
used, e.g., patterns of black, brown, and green, in combination. The camouflage material is
supported or draped over and around the objects or equipment to be concealed, and multiple
2. 2 Vignesh Dhanabalan M.Tech (Technical Textiles)
sections of the same or other shapes may be suitably joined at their edges to provide the
particular size needed to cover the objects or equipment to be concealed.
Surveillance systems may operate in a wide waveband of the electromagnetic spectrum,
including UV, near infra-red (NIR), far infra-red (FIR), radar in the millimetric or centimetric
band, and acoustic ranges.
Camouflage is more than just blending into foliage. It means blending into background in
the infrared and ultraviolet spectrum as well. Handheld IR sensor is widely found, even in
commercial form and UV sensor is often employed as airborne sensors [1-3].
Camouflage materials can be basically divided into 3 categories based on the application
levels
Built-in Camouflage.
Add-on Camouflage is an aspect of built-in camouflage which applies to retro-fit situations,
Built-in camouflage include exhaust cooling, shielding, dissipation, structural arrangements to
reduce highly reflective gecmetries, and flash suppressors. Many built-in features can only be
used successfully when an item/system is in its concept formulation, engineering development,
or early prototype stages.
Operational camouflage:
In field situations, the material responds to the local tactical situation and the degree of
camouflage applied by the field commander. Included are sich matters as sound and light
discipline and proper use of terrain and shadow in position and movement of Troop training and
that cause successful operational camouflage.
Field Applied Camouflage:
Troops in the field apply camouflage to themselves or to their equipment by using either
locally available material such as mud, brush or grass, or materials issued from inventory, such
as camouflage screens, multiband width camouflage material.
3. 3 Vignesh Dhanabalan M.Tech (Technical Textiles)
Requirements for camouflage to conceal materials
Table 1: Different spectral wave bands
The visible waveband
This camouflage material used is of primitive type, belonging to stage one where the
mimic natural or even artificial backgrounds, not just in terms of color, but also patterns, gloss
and texture. They are basically temperate woodland pattern that uses four colors like green,
khaki, brown and black in a random disruptively patterned material (DPM). It is not so effective
in open grasslands but helps in deceiving materials from the naked eye at far away distances.
Infra-Red spectrum (non-visible near infra-red region)
To provide camouflage in non-visual range of spectrum, i.e., against NIR detection
devices working in the range of 700–1500 nm (significantly high between 700-900 nm), it
becomes essential that camouflaging equipment should be painted/dyed with the pigments/dyes
having NIR reflectance values similar to that of backgrounds in respective shades. This region is
important because the spectral characteristics of chlorophyll are very noticeable in this region.
For achieving IR camouflage, textile systems are dyed, coated or painted in such a way that the
reflectance trend in non-visual must be matched with the reflectance trend of the background [4].
4. 4 Vignesh Dhanabalan M.Tech (Technical Textiles)
Dyes and pigments for near infra-red camouflage
There exists a specially selected range of vat dyes for cellulosic fibres and blends thereof,
which confer both the correct visual and NIR reflectance. An alternative technique to increase
the absorbance of brown and black colors is to bind carbon black pigments in the printing pastes.
The shades of vegetation and desert regions are confined to olive green, brown, deep Brunswick
green, light stone and dark stone color. These paints and coverings maybe effective only in
visual region or may have additional properties that are effective even in non-visual regions, i.e.,
against IR, thermal and radar detection devices so it is required that IR reflectance values of
pigment formulation must match with the IR reflectance values of the shades of vegetation or
desert terrains background.
Far Infrared region (Thermal camouflage)
Thermal camouflage (F-IR) includes a covering material with a strengthening layer and
an outer layer of plastics, which in the visible wavelength range has different colored areas for
visual camouflage effect, characterized in that between the strengthening layer and the outer
layer is a metal reflection layer, in that the plastics material of the outer layer has high
transmissivity in the wavelength ranges 3-5 pm and 8-14 pm. In that, the outer surface of the
outer layer is mat- finished for reducing its secular reflection, and in that the metal reflection
layer is broken up into a mosaic structure for avoiding radar reflection. Outer layer is
polyethylene which is colored through with a camouflage pigment which is low-absorbent in the
infrared wavelength range and the other side it is PVC. The strengthening layer is a weave
containing conductive metal wires for radar camouflage effect. The metallic layer 2 reflects
within the wavelength range 2-15 pm, and also be reflects within other wavelengths as well.
Vaporized aluminum coatings over 50A give such properties Uniform green with lightness 5.9,
color tone 23.9 and saturation 7.7. Positioning an infrared radiation absorbing layer between the
infrared radiation source and the infrared detector makes the infrared radiation absorbs.
Thermal imagers are now be used to detect hot vehicle tires, engines and exhausts at a
range of several kilometers. Humans can also be readily detected at the longer 8±14 micron
waveband, especially if skin is exposed on face and arms. By reducing the temperature of the
target, (by wearing more thermal insulation material and by increasing the external surface area
using fur, pile or leafy structures) detection using far infrared can be minimized [5].
5. 5 Vignesh Dhanabalan M.Tech (Technical Textiles)
Measured secular reflection at different wavelengths is as follows
360-440 nm 5.0%
680 nm 4.5 %
750 nm 9.5%
850 nm 57 %
950 nm 61 %
1200 nm 67 %
Ultra-Violet spectrum (Arctic camouflage)
A system providing camouflage protection at near ultraviolet wavelengths to an object
surrounded by an environment should have an ultraviolet reflectivity similar to an ultraviolet
reflectivity of the environment. The near-ultraviolet spectrum from 320-400 nm (UVA,
henceforth “UV”) complementing the human visible spectrum from 400-750 nm [6].
Surface
Percent Diffuse Reflection
Fresh snow 85
“Dirty” old snow 50
Dry dune sand 22
Dry white dune sand 39
Atlantic beach sand-wet 9
Sea foam (surf) 39
Green mountain grassland 2
Dry, parched grassland 4.8
Sandy turf 3.3
Deciduous trees (leaves) 7
Unpainted wood 8.3
6. 6 Vignesh Dhanabalan M.Tech (Technical Textiles)
White cement 22
Concrete pavement 15.6
Black asphalt 11.7
Granite boulder 70
Rough dark tree bark (oak) 15
Smooth medium tree bark (aspen) 50
White birch bark 70
Water 5
Table 2: Reflectance value of UV band is tabulated
Arctic camouflage
Ultraviolet photography is a form of detection method employed in snow-covered
environments. Snow has high UV reflectance values, whereas man-made objects generally have
low UV reflectance. In fabrics, the use of Titanium Dioxide (TiO2) as a dulling agent causes very
low UV reflectance which helps in altering the output value of the UV band.
Vehicle paints for use in arctic areas contain Zirconium Oxide (ZrO2), which has
reflectance values in the UV that provide a good match to snow. A textile grade filament may
have diameters less than 0.02 in (20 microns) so particle sizes for the pigments used reed to be
muti less than this diameter. As an example, TiO2 can be obtained with uniform particle sizes of
0.8 microns which are easily dispersed and do not clog [7].
Radar camouflage
Defeating doppler radar systems is difficult, especially for any movement of the
human/target is detected. Incorporating stealth measures into textile nets and covers for static
vehicles and installations can help in camouflaging from radar detection. The most significant
threat band is 2±18 GHz followed by 90±98 GHz. Commercial radar nets exist, but have
limitations. Howard (2000) calculated that a 22 dB reduction in radar signature was required to
7. 7 Vignesh Dhanabalan M.Tech (Technical Textiles)
make a static target look like background clutter. Radar nets tend to use textile substrates with
the inclusion of metallic fiber bundles and granular coatings of stainless steel or silver.
Optical camouflage
Optical camouflage is a hypothetical type of active camouflage currently only in a very
primitive stage of development. The idea is relatively straightforward: to create the illusion of
invisibility by covering an object with something that projects the scene directly behind that
object. The cloak that enables optical camouflage to work is made from a special material known
as retro-reflective material.
Currently the system only works from one point of view,
Fig 1: Working of optical camouflage system
Optical camouflage would only provide invisibility in the visible portion of the spectrum.
Their prototype uses an external camera placed behind the cloaked object to record a scene,
which it then transmits to a computer for image processing. The computer feeds the image into
an external projector which projects the image onto a person wearing a special retro reflective
coat. This can lead to different results depending on the quality of the camera, the projector, and
the coat, but by the late nineties, convincing illusions were created. When light strikes one of
these beads, the light rays bounce back exactly in the same direction from which they came [9].
The downside is the large amount of external hardware required, along with the fact that
the illusion is only convincing when viewed from a certain angle. Creating a truly
8. 8 Vignesh Dhanabalan M.Tech (Technical Textiles)
realistic optical illusion would likely require Phase Array Optics, which would project light of a
specific amplitude and phase and therefore provide even greater levels of invisibility. We may
end up finding optical camouflage to be most useful in the environment of space, where any
given background is generally less complex than earthly backdrops and therefore easier to
record, process, and project [8].
Designing of camouflage textiles
Different parameters that influence the characteristic of a camouflage material
The Ph factor
The chromospheres and the auxochromes may tend to change the parental color when in contact
with acid/alkali material but this method extremely difficult to implement in the applications.
Bond breaking/making
There are a number of systems that undergo reversible bond-breaking, bond-forming processes
that result in dramatic color changes. Most commonly, these are light-initiated processes.
Photo chromic material
The change in color effect is due to incident light. Till date, photochromism is most important for
optical switching data and imaging systems. They emit the color when activated by visible light
and those emit different color when activated by ultraviolet radiation.
Thermochromic materials
As the name suggest, it is a chromic material that changes color based on heat effect. But
this thermochromism is difficult to attain because changes in the fabric can be found when the
temperature difference is high typically 100–200°C, and so are not of much use for producing
thermochromic effects on textiles. An alternative method of inducing thermochromism is by
means of a rearrangement of the molecular structure of the dye, as a result of a change in
temperature. [2]
9. 9 Vignesh Dhanabalan M.Tech (Technical Textiles)
Sheath-core bicomponent fibers for camouflage
The complex permeability of fibers with Ba/Mn-Zn ferrite was improved compared with
that of fiber with single Mn-Zn ferrite and the complex permittivity of fiber containing the 20 wt
% Ba/Mn-Zn ferrite increased with the increasing bronze content. The fibers filled with the
Ba/Mn-Zn ferrite and bronze particles had good radar absorbing effect. The input of Al particles
in the sheath-part of the fibers showed a limited effect on the radar wave absorbing properties of
the fibers. The lowest infrared emissivity of the fibers including 15 wt % Al particles in sheath-
part reached 0.62 [9]
The fibers (PP/fillers master-batches) filled with the barium ferrite, Mn–Zn ferrite and bronze
fillers had good radar absorbing effect. The input of infrared camouflage fillers in the sheath-part
showed a limited effect on the radar wave absorbing properties of the bicomponent fibers [10].
Orientation of chromophore by surface attachment to polymers
The effect of the field on the net dipole moment varies from molecule to molecule leading to an
average change of the color due to a reduction in the maximum electro chromic shift observed.
Oxidation
Oxidation and redox reaction make the material undergo distinct colour change.
Surface orientation
Attachment of chromophores to the surface of films and fibers by electrically conducting
polymers gives us a method to alter the chromospheres‟ oxidation state subjected to an electrical
field. The optical response of a chromophore material to electric field highly dependents on
molecular orientation.
Camouflage composite construction
A lightweight composite camouflage construction comprising of open mesh net substrate
and a continuous sheet overlying the substrate bonded to the substrate along at least three spaced
lines of attachment, said sheet being cut on opposite sides of said lines of attachment to form a
plurality of lobes. Each lobe has a base portion attached to the outer end portion free from the
substrate to simulate the appearance of natural objects of a terrain, color patterned in desired to
conform in which the camouflage structure is used.
10. 10 Vignesh Dhanabalan M.Tech (Technical Textiles)
Slit fabric are sheets processed with pattern incising by means of metal rings, referred to
as hog rings. This type camouflage system is relatively heavy in weight and difficult for
personnel to handle in field operations.
In the formation, indefinite length webs of a net substrate and a continuous sheet are
combined in faced relation and stitch-bonded along spaced parallel continuous lines by Malino
stitch-bonding machine or a quilting machine to form continuous parallel channels or pockets
along the length of the composite material. The composite net and sheet material is thereafter
passed through a cutting machine having a plurality of generally U-shaped guide members
disposed across the path of movement of the composite to enter each channel of the composite
net and sheet and separate and space the net substrate from the sheet. [11].
Camouflage fabrics
The fabric comprising at least three types of synthetic polymer multifilament yarns from
the group consisting of: a first type of multifilaments comprising carbon black in an amount of
from about 10 parts per million to about 300 parts per million, a second type of multifilament
comprising pigments which modify a NIR reflectance characteristic of said second type of
multifilament, and a third type of multifilament substantially free of additives capable of
modifying the NIR reflectance. Characteristics of third type of multifilament exhibited a single
substantially uniform color appearance in the VIS spectrum of 400-680nm and further exhibited
a patterned appearance in the NIR spectrum of 700-900 nm due to different NIR reflectivity of
the component multifilament yarns.
Designing of camouflage wool
A photo chromic wool fabric has been prepared by applying a photo chromic- dye hybrid
silica sol-gel onto the surface of fabric. The photo chromic fabric have a very quick optical
response. The silica sol was prepared by mixing silane, TAS, water, and ethanol with the ratio of
silane:TAS:ethanol:water at 1:1:10:7 (mol), and stirring intensively at room temperature for 24
hours. 0.5% of photo chromic dye-ethanol solution was then added into the as-prepared silica sol
solution (15 ml) and stirred for 20 minutes to give a homogeneous solution. A piece of wool
fabric padded with this dye-silica sol solution and dried at room temperature and cured. UV-VIS
spectrometer was observed in the wavelength range of 450–800 nm [12]
11. 11 Vignesh Dhanabalan M.Tech (Technical Textiles)
Camouflage Pigment Coating
The optical properties of paint films and dyed or printed fabric surfaces can be largely
attributed to the type of pigment present. Thus, application of surface coating techniques to the
field of camouflage has resulted in a need for information on the optical properties of pigments
in the infrared region.
Camouflage dyed fabrics
The fabric is dyed to a substantially single color appearance in the visible spectrum. In
general, the fabric has a NIR spectrum comprising two reflectance curves having about 10% to
about 85% reflectance separated by about 5% reflectance in a range of wavelengths from about
700 to about 860 nanometers (nm).
Requirement for camouflage pigments/color
Camouflage prints have to meet extremely high standards of color fastness, infrared reflectance
properties and consistency of shade.
1 . Color matching of shade variation in visible region.
2 . Ability to meet defined fastness requirement.
3 . Ability to produce required infrared reflectance values.
Visual decoys
Textile materials are widely used to fabricate and simulate the outline of high value
military targets such as aircraft, tanks, missile launchers, and other vehicles. These decoys vary
in their complexity depending on the source of the potential attack. If surveillance and target
acquisition is at short range, and with sufficient time to study detail, then the decoy has to be a
realistic three-dimensional copy of the genuine item. Inflatable decoys made from neoprene or
hypalon-coated nylon fabrics have been used to mimic armored fighting vehicles. The tactical
advantages of decoys are obvious: they confuse the enemy into believing that opposing forces
are larger than in reality.
12. 12 Vignesh Dhanabalan M.Tech (Technical Textiles)
Fig 2: Visual decoy
They may also cause the enemy to release expensive weaponry and ordnance at worthless
targets, wasting valuable mission effort and exposing themselves to the risk of retaliation from
„real‟ weapons [3].
Multispectral camouflage nets and mats
A multispectral three-dimensional camouflage mat has a base or substrate layer into
which are woven strands of yarn of varying length and color to simulate terrain or landscape, or
alternatively to serve as a decoy by simulating a target. Desired reflection and absorption of
visible light as well as infrared, ultraviolet, and microwave frequencies is provided by materials
integrally contained within the yarn strands, and by supplemental materials on the base layer.
The backing layer is polypropylene; the tufted yarn strands have different coloration and are
arranged at different height levels above the backing layer, the colorations and levels being
selected to provide visual simulation of a natural terrain. Different lengths whereby at least some
shorter strands are concealed from visual observation by longer overhanging strands, the shorter
and longer strands having different signatures to interrogating wavelengths, the strands being
colored and arranged to provide an accurate and detailed simulation of a desired scene. The
strands are formed as loop pile rather than cut pile to provide a self-supporting springy quality to
13. 13 Vignesh Dhanabalan M.Tech (Technical Textiles)
the mat upper surface. Each strand has at least a single base fiber or filament which is preferably
a plastic material such as bulk-continuous-filament (BCF) polypropylene or nylon. Preferably
The plastic material incorporates additives, and other fibers may be interwoven with the base
fiber to impart desired reflecting or absorbing properties Tuft density which may range from
about 5000 (for a bulky yarn) to over 200,000 loops per square yard. Multilevel tuft construction
which provides a three-dimensional effect and accurate terrain simulation over a range of
potential viewing angles [13].
Dye or other coloring agent are added to impart the desired color (typically black, brown
or tan, and various shades of green, as discussed below) to the strand and to provide controlled
absorption or reflection of infrared radiation. Radar-absorbing material such as finely powdered
carbon or graphite, a radar-reflecting metallic material such as silver, copper, and the like
(including compounds of such metals), or mixtures of absorbers and reflectors [14].
Camouflage Coverings
A camouflage covering for covering military equipment comprising several layers as
counted from a bottom side to an outer surface; a strength layer, an aluminized plastic film, a
layer comprising fibers of a super-absorbent matter, and a surface layer, layers are needled
together and surface layer has a pile configuration, a mat-like structure having the desired
properties is obtained by needling together several webs of different materials, one of which
comprises a so-called super-absorbent material. There exist several such materials, some of
which have a very poor structure when wet, e.g. metoxycellulose. It is therefore preferred to use
some such material which has better structural properties when wet, e.g. an acrylic-based fiber-
like Lanseal, mixed with some fibers which further improve the structure, like rayon or
polypropylene. It is advantageous to include in the structure some fibers which are hydrophilic,
as this will improve evaporation from the layer comprising super-absorbent material. It is also
advantageous to comprise in all the webs, or at least some, electrically conducting fibers, as this
will give a good radar absorption property. The fact that the radar absorbency is distributed in a
three-dimensional structure that improves substantially the radar camouflage effect. For
obtaining a good visual camouflage effect, its particularly advantageous feature that the
outermost pile of the camouflage covering is a Dilo-made pile, which substantially diminishes
light reflexion properties [15].
14. 14 Vignesh Dhanabalan M.Tech (Technical Textiles)
Invisible camouflage fabric (hyper stealth biotechnology)
Quantum Stealth' camouflage material is said to render its wearers completely invisible by
bending light waves around them [16].
Fig 3: Invisible cloak (hyper stealth biotechnology)
Camouflage detection and identification of moving targets.
Camouflage patterns are effective for stationary targets. They cannot prevent detection or
capture of moving targets. However, these cryptic patterns can affect the identification of a
moving target when similarly patterned objects are present. To be mobile, it is best to be
surrounded by similar targets (e.g. other animals in a herd) to reduce the chance of being
identified. Despite previous assumptions, motion does not entirely „break‟ camouflage [17].
Detection of material
Modern surveillance technology (infra red observation technology such as image
intensifier) can be used to identify troop movement, troop strength etc. even in conditions where
human eye finds it difficult to detect anything. These detection methods operate in the near
infrared region. Infrared rays are electromagnetic radiation at the upper end of the spectrum and
are invisible to the human eye. In this range, the characterization reflectance properties of most
objects differ from their properties in the visible range. The images obtained depend on the
reflectance properties of the object in the infrared region. On a black-and-white infrared film,
high reflectance produces a bright image while low reflectance produce dark image.
15. 15 Vignesh Dhanabalan M.Tech (Technical Textiles)
Fig 4 (a) normal color image Fig 4 (b) IR black and white color film
Effect of nuclear flash in camouflage fabrics
The feasibility of using phototropic camouflage colorants in combat clothing for
protection against intense flash pulse emitted by a nuclear bomb detonation is risky. Such
colorants would undergo rearrangement in structure to form colorless in the initial stage of the
nuclear flash pulse, thereby increasing the reflectivity of the fabric, and would revert to color
form when the flash pulse subsides. Suitable phototropic colorants would regain their color
almost completely within one second after exposure to an intense pulse of activating radiant
energy. This result suggests that in screening colorants by means of simulated Hash pulses,
provision must be made for detecting transient discoloration cycles with duration times of the
order of one second or less [18].
Conclusion
Camouflaged targets are harder to identify than uncamouflaged targets when similar
background objects are present. The specific details of the camouflage patterns have little impact
on this effect. If one has to move, camouflage cannot impede detection; but if one is surrounded
by similar targets (e.g. other animals in a herd, or moving background distracters), then
camouflage can slow identification. Despite previous assumptions, motion does not entirely
'break' camouflage.
16. 16 Vignesh Dhanabalan M.Tech (Technical Textiles)
Bibliogrphy
1. Richard A. Scott, Textiles for protection book, Woodhead Publishing Limited, ISBN-13: 978-1-
84569-097-7 (e-book).
2. Eugene Wilusz, Military textiles, Woodhead Publishing Limited ISBN 978-1-84569-451-7 (e-
book), 2008.
3. Handbook of technical textiles, Horrocks and Anandh.
4. K.K gupta, nishkam and N. kasturiya, Camouflage in the Non-Visible Region, Journal of
Industrial Textiles pp 31: 27, 2001.
5. Lars Karlsson, Erik W. Wallin, Patent EP0114154A2 - Thermal camouflage, 25 Jul 1984.
6. Mark j. hepfinger, Lisa. Hepfinger peter j, Olejarz, preparation of fibers with enhanced
ultraviolet (uv) reflectance for arctic camouflage, united states army natick research,
development and engineering center natick, massachusetts 01760-5000, december 1991.
7. Reed F. Curry, Camouflage in the near ultraviolet spectrum, US20110180768 A1, Jul 28, 2011.
8. http://www.wisegeek.com/what-is-optical-camouflage.htm.
9. Yu, B., Qi, L., Ye, J.-z. and Sun, H., Journal of Applied Polymer Science, Volume 104, Issue 4,
(/doi/10.1002/app.v104:4/issuetoc) pages 2180–2186, 15 May 2007,
10. Bin Yu, Lu Qi, Jian-zhong Ye, Hui Sun , Journal of Polymer Research, The Research of Radar
Absorbing Property of Bicomponent Fibers with Infrared Camouflage, , Volume 14, Issue 2, pp
107-113, April 2007.
11. Robert R. Leonard, ,Camouflage construction, US4931320 A, 5 Jun 1990,
12. Tong Cheng, Tong Lin1, Jian Fang and Rex Brady, Photochromic Wool Fabrics from a Hybrid
Silica Coating, Textile Research Journal 2007 77: 923.
13. Jorgen Birch, Broad spectrum camouflage mat and screen, US4767649 A, 30 Aug 1988,
14. Broad spectrum camouflage mat, US4659602 A, Jorgen Birch, 21 Apr 1987.
15. Camouflage covering, US 5153045 A, 27 Oct 1988, Diab-Barracuda Ab.
16. http://www.dailymail.co.uk/sciencetech/article-2245935/The-camouflage-fabric-make-soldiers-
INVISIBLE-Company-claims-Pentagon-backing-miracle-material.html#ixzz2fN7ibytz
17. http://www.bristol.ac.uk/vision-institute/news/2013/51.html
18. Leonard Weissbein, The Use of Phototropic Camouflage Colorants in Combat Clothing to
Protect Against Nuclear Flash Radiation, Textile Research Journal 1962; 32; 998.
19. http://www.bristol.ac.uk/vision-institute/news/2013/51.html.