This document summarizes research on utilizing glass powder and fly ash in concrete paver blocks. Paver blocks were produced with varying replacements of cement with fly ash and manufacturing sand with glass powder. The blocks were tested for compressive strength, flexural strength, and water absorption. Test results found that replacing 30% of cement with fly ash and 30% of manufacturing sand with glass powder produced blocks with improved compressive strength, flexural strength, and lower water absorption, while also reducing costs. Utilizing these waste materials provides environmental and economic benefits for paver block production.
Abstract This state of art review represents the development in the field of utilization of used foundry sand in cementitious concrete. The paper reviews the utilization of foundry sand as the concrete constituent and the noticeable and important findings from the experimental works of various researchers. The historical development is also discussed as a part of introduction in the review. After a careful study of large number of research papers on the topic it was felt by the authors to integrate all the important results for streamlining the potential of this area of research. The paper summarizes conclusions of experiments conducted for the properties like strength and durability. It was observed the results have shown positive changes and improvement in strength and durability properties of the conventional cementitious concrete due to the addition or replacement of fine sand with used foundry sand in different proportions. However in couple of cases such addition has reported reduction in the values of properties. From the review of past research works it could be concluded that utilizing the used foundry sand holds a great potential towards the development of environment friendly and sustainable cementitious concretes. Key Words: foundry waste, foundry sand, concrete, strength, durability, utilization
Abstract This state of art review represents the development in the field of utilization of used foundry sand in cementitious concrete. The paper reviews the utilization of foundry sand as the concrete constituent and the noticeable and important findings from the experimental works of various researchers. The historical development is also discussed as a part of introduction in the review. After a careful study of large number of research papers on the topic it was felt by the authors to integrate all the important results for streamlining the potential of this area of research. The paper summarizes conclusions of experiments conducted for the properties like strength and durability. It was observed the results have shown positive changes and improvement in strength and durability properties of the conventional cementitious concrete due to the addition or replacement of fine sand with used foundry sand in different proportions. However in couple of cases such addition has reported reduction in the values of properties. From the review of past research works it could be concluded that utilizing the used foundry sand holds a great potential towards the development of environment friendly and sustainable cementitious concretes. Key Words: foundry waste, foundry sand, concrete, strength, durability, utilization
Strength behaviour of foundry sand on modified high strength concreteeSAT Journals
Abstract Metal foundries use a large amount of sand as part of the metal casting process. Foundry industries generally recycle and reuse the used foundry sand many times in casting process. When the sand can no longer be reused in the foundry, it is removed from the foundry and is termed as "foundry waste sand." Like many waste products, foundry sand has beneficial applications to other industries. A mixture of silica sand coated with a thin film of burnt carbon and residual binder with traces of dust is termed as foundry sand. From the previous available literature it was found that replacement of sand by foundry sand by certain initial percentages gives a marginal increase in hardened properties of normal strength concrete. In the present work, fine aggregate is replaced by foundry sand with percentages and tests were performed for hardened properties of modified high strength concrete for all replacement levels. Keywords: Waste Foundry Sand, physical properties, chemical properties, compressive strength, splitting tensile strength and flexural strength
Utilization of Foundry Waste Sand in the Preparation of Concreteiosrjce
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of mechanical and civil engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in mechanical and civil engineering. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Experimental Investigation on the Concrete as a Partial Replacement of Fine a...IJSRD
This project work involves in an experimental study on the concrete by using stone dust and brick dust on the mechanical properties of the concrete. In this experimental study two types admixtures are used in preparation of concrete mix. Stone dust and brick dust are added from 0% to 25% by weight of fine aggregate with increment of 5%. A comparative analysis has been carried out for conventional concrete to that of the admixture concrete in relation to their compressive, split tensile and flexural strength properties. As the stone dust and brick dust content increases in cement concrete, the compressive and split tensile values are proportionally increasing. It is observed that at 20% of stone dust and brick dust is the optimum dosages for concrete mixture.
Study on the Effect of Ggbs & M Sand in Self Compacting oncretetheijes
Conventional concrete is the most widely used construction material throughout the world because of its versality, mouldability, durability, and resistance to fire and energy efficiency. However, its major disadvantages like poor tensile strength, limited ductility and little resistance to cracking resists its use as a structural material. Hence, in order to overcome these difficulties several new materials have been developed in the recent past.Admixtures are ingredients other than water, aggregates, hydraulic cement and fibers that are added to the concrete batch immediately before or during mixing. Mineral admixtures are usually added to concrete in larger amounts to enhance the workability of fresh concrete, to improve resistance of concrete to thermal cracking, alkali-aggregate expansion and sulphate attack and to enable a reduction in cement content. The objective of this study is to evaluate the effectiveness of various mineral admixtures in producing SCC. In this study the scope of GGBS ( Ground granular blast furnace slag ) as a mineral admixture to some percentage replace cement in SCC were studied. The study showed that a maximum of 50% GGBS were able to be used as a mineral admixture without affecting the self-compactability
Improved Concrete Properties Using Quarry Dust as Replacement for Natural SandIJERD Editor
Concrete plays a major role in the construction industry. Natural sand is a prime material used for
the preparation of concrete and also plays an important role in Mix Design. Now a day’s river erosion and other
environmental issues have led to the scarcity of river sand. The reduction in the sources of natural sand and the
requirement for reduction in the cost of concrete production has resulted in the increased need to find new
alternative materials to replace river sand so that excess river erosion is prevented and high strength concrete is
obtained at lower cost. One such material is Quarry stone dust: a by-product obtained during quarrying process.
Attempts have been made to study the suitability of Quarry dust as sand replacing material and it has been found
that Quarry dust improves the mechanical properties of concrete as well as elastic modulus. The optimum
compressive strength is achieved at the proportion of fine to coarse with 60:40 ratio
Partial Replacement of Cement with Marble Dust PowderIJERA Editor
The waste generated from the industries cause environmental problems. Hence the reuse of this waste material
can be emphasized. MarbleDust Powder (MDP) is a developing composite materialthatwillallow the
concrèteindustry to optimisemateriel use, generateeconomicbenefits and build structures thatwillstrong, durable
and sensitive to environnement. MDP is by-product obtained during the quarrying process from the parent
marble rock; which contains high calcium oxide content of more than 50%. The potential use of MDP can be an
ideal choice for substituting in a cementitious binder as the reactivity efficiency increases due to the presence of
lime. In this research work, the waste MDP passing through 90 microns,has used for investigating of hardened
concrete properties. Furthermore, the effect of different percentage replacement of MDP on the compressive
strength, splitting tensile strength (indirect tensile strength)&flexural strength has been observed. Inthis
experimental study, the effect of MDP in concrete on strength ispresented. Five concrete mixtures containing
0%, 5%, 10%, and 20% MDP as cement replacement by weightbasis has been prepared. Water/cement ratio
(0.43) was kept constant, in all the concretemixes. Compressive strength, split tensile strength & flexural
strength of the concrete mixtures has been obtainedat 7 and 28 days. The results of the laboratory work showed
thatreplacement of cement with MDP increase, upto 10% for compressive strength,&upto 15% for split
tensilestrength &flexural strength of concrete.
A Study on self-Compacting Concrete Using Portland Slag Cement with Partial R...IJERA Editor
Concrete plays a vital role as a construction material in the world. In the present scenario, waste materials from various industries are added to the mix. Over 400 million tons of waste materials are being produced by various industries every year. Foundries successfully recycle and reuse the sand many times in a foundry. When the sand can no longer be reused in the foundry, it is removed from the foundry and is termed as Foundry sand. Foundry sand production is nearly 6 to 10 million tons annually. There is a possibility of substituting natural fine aggregate with waste foundry sand which offers technical, economic and environmental advantages which are of great use in the construction sector. The construction industry is now slowly becoming aware of the environmental issues and other sustainable development issues for cement and concrete industries. It is looking for the ways and means to develop building products, which will increase the life span and quality. This thesis presents an experimental investigation on strength aspects like compressive, split tensile and flexural strength of Self Compacting Concrete (SSC) containing an industrial waste foundry sand. It is used as fine aggregate in varying proportions, replacing the fine aggregate with foundry sand as percentages of 0%, 25%, 50%, 75%, 100%. For this green SCC, all SCC tests are performed as per EFNARC guidelines i.e. slump flow, L-box, V funnel and T50 tests are carried out.
Strength behaviour of foundry sand on modified high strength concreteeSAT Journals
Abstract Metal foundries use a large amount of sand as part of the metal casting process. Foundry industries generally recycle and reuse the used foundry sand many times in casting process. When the sand can no longer be reused in the foundry, it is removed from the foundry and is termed as "foundry waste sand." Like many waste products, foundry sand has beneficial applications to other industries. A mixture of silica sand coated with a thin film of burnt carbon and residual binder with traces of dust is termed as foundry sand. From the previous available literature it was found that replacement of sand by foundry sand by certain initial percentages gives a marginal increase in hardened properties of normal strength concrete. In the present work, fine aggregate is replaced by foundry sand with percentages and tests were performed for hardened properties of modified high strength concrete for all replacement levels. Keywords: Waste Foundry Sand, physical properties, chemical properties, compressive strength, splitting tensile strength and flexural strength
Utilization of Foundry Waste Sand in the Preparation of Concreteiosrjce
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of mechanical and civil engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in mechanical and civil engineering. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Experimental Investigation on the Concrete as a Partial Replacement of Fine a...IJSRD
This project work involves in an experimental study on the concrete by using stone dust and brick dust on the mechanical properties of the concrete. In this experimental study two types admixtures are used in preparation of concrete mix. Stone dust and brick dust are added from 0% to 25% by weight of fine aggregate with increment of 5%. A comparative analysis has been carried out for conventional concrete to that of the admixture concrete in relation to their compressive, split tensile and flexural strength properties. As the stone dust and brick dust content increases in cement concrete, the compressive and split tensile values are proportionally increasing. It is observed that at 20% of stone dust and brick dust is the optimum dosages for concrete mixture.
Study on the Effect of Ggbs & M Sand in Self Compacting oncretetheijes
Conventional concrete is the most widely used construction material throughout the world because of its versality, mouldability, durability, and resistance to fire and energy efficiency. However, its major disadvantages like poor tensile strength, limited ductility and little resistance to cracking resists its use as a structural material. Hence, in order to overcome these difficulties several new materials have been developed in the recent past.Admixtures are ingredients other than water, aggregates, hydraulic cement and fibers that are added to the concrete batch immediately before or during mixing. Mineral admixtures are usually added to concrete in larger amounts to enhance the workability of fresh concrete, to improve resistance of concrete to thermal cracking, alkali-aggregate expansion and sulphate attack and to enable a reduction in cement content. The objective of this study is to evaluate the effectiveness of various mineral admixtures in producing SCC. In this study the scope of GGBS ( Ground granular blast furnace slag ) as a mineral admixture to some percentage replace cement in SCC were studied. The study showed that a maximum of 50% GGBS were able to be used as a mineral admixture without affecting the self-compactability
Improved Concrete Properties Using Quarry Dust as Replacement for Natural SandIJERD Editor
Concrete plays a major role in the construction industry. Natural sand is a prime material used for
the preparation of concrete and also plays an important role in Mix Design. Now a day’s river erosion and other
environmental issues have led to the scarcity of river sand. The reduction in the sources of natural sand and the
requirement for reduction in the cost of concrete production has resulted in the increased need to find new
alternative materials to replace river sand so that excess river erosion is prevented and high strength concrete is
obtained at lower cost. One such material is Quarry stone dust: a by-product obtained during quarrying process.
Attempts have been made to study the suitability of Quarry dust as sand replacing material and it has been found
that Quarry dust improves the mechanical properties of concrete as well as elastic modulus. The optimum
compressive strength is achieved at the proportion of fine to coarse with 60:40 ratio
Partial Replacement of Cement with Marble Dust PowderIJERA Editor
The waste generated from the industries cause environmental problems. Hence the reuse of this waste material
can be emphasized. MarbleDust Powder (MDP) is a developing composite materialthatwillallow the
concrèteindustry to optimisemateriel use, generateeconomicbenefits and build structures thatwillstrong, durable
and sensitive to environnement. MDP is by-product obtained during the quarrying process from the parent
marble rock; which contains high calcium oxide content of more than 50%. The potential use of MDP can be an
ideal choice for substituting in a cementitious binder as the reactivity efficiency increases due to the presence of
lime. In this research work, the waste MDP passing through 90 microns,has used for investigating of hardened
concrete properties. Furthermore, the effect of different percentage replacement of MDP on the compressive
strength, splitting tensile strength (indirect tensile strength)&flexural strength has been observed. Inthis
experimental study, the effect of MDP in concrete on strength ispresented. Five concrete mixtures containing
0%, 5%, 10%, and 20% MDP as cement replacement by weightbasis has been prepared. Water/cement ratio
(0.43) was kept constant, in all the concretemixes. Compressive strength, split tensile strength & flexural
strength of the concrete mixtures has been obtainedat 7 and 28 days. The results of the laboratory work showed
thatreplacement of cement with MDP increase, upto 10% for compressive strength,&upto 15% for split
tensilestrength &flexural strength of concrete.
A Study on self-Compacting Concrete Using Portland Slag Cement with Partial R...IJERA Editor
Concrete plays a vital role as a construction material in the world. In the present scenario, waste materials from various industries are added to the mix. Over 400 million tons of waste materials are being produced by various industries every year. Foundries successfully recycle and reuse the sand many times in a foundry. When the sand can no longer be reused in the foundry, it is removed from the foundry and is termed as Foundry sand. Foundry sand production is nearly 6 to 10 million tons annually. There is a possibility of substituting natural fine aggregate with waste foundry sand which offers technical, economic and environmental advantages which are of great use in the construction sector. The construction industry is now slowly becoming aware of the environmental issues and other sustainable development issues for cement and concrete industries. It is looking for the ways and means to develop building products, which will increase the life span and quality. This thesis presents an experimental investigation on strength aspects like compressive, split tensile and flexural strength of Self Compacting Concrete (SSC) containing an industrial waste foundry sand. It is used as fine aggregate in varying proportions, replacing the fine aggregate with foundry sand as percentages of 0%, 25%, 50%, 75%, 100%. For this green SCC, all SCC tests are performed as per EFNARC guidelines i.e. slump flow, L-box, V funnel and T50 tests are carried out.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.