An efficient and improved model for power theft detection in PakistanjournalBEEI
This paper describes an improved model for the monitoring of power used by a party such as household users and different industries in Pakistan. The power theft detection was done using the intelligent internet of things (IoT) service system for calculating the user's power simultaneously. The power meter catches a theft detection device that is instantly transmitted to the central system which compares both the data by means of microcontroller and if there is any difference found, it informs the power utility about the hooking, meter relief or theft activities happen. Information of the theft detection through the global mobile communications system is transmitted and notified theft is displayed on the terminal monitor or won. As a result, although consumers continue to use excess fuel, the customer's power supply is cut in the electricity boards segment. The general radio package module system sends central circuit and meter data via an internet protocol address to a web server. GSM's IoT based perception is used to monitor the power supply and billing information calculated with a microcontroller continuously with the determination of the electricity table area. With this unit, the duplicate user can be located at the rear of the electricity office with the power meter status.
IOT BASED POWER GRID MONITORING & CONTROL SYSTEMvivatechijri
Energy generation corporations provide electricity to any or all the households via intermediate controlled power transmission hubs referred to as Electricity Grid. Generally issues arise thanks to failure of the electricity grid resulting in black out of a complete space that was obtaining provide from that individual grid. This project aims to resolve this downside victimization IOT because the means that of communication and conjointly coping with numerous alternative problems that a wise system will traumatize to avoid needless losses to the Energy producers.
IoT Based Smart Energy Meter using Raspberry Pi and Arduino Bilal Amjad
This project, design and implemented a low-cost IoT based energy monitoring system (smart energy meter) for real-time monitoring of all electrical parameters i.e. AC voltage, AC current, active power, total energy consumption, power factor, frequency, and tariff. The design is based on a low-cost PZEM-004T, using a non-invasive Current Transformer
(CT) sensors, Arduino and Raspberry pi. Electrical measurements are done by PZEM-004T and CT sensors through Arduino. Raspberry pi communicates with Arduino through serial communication to retrieve these sensor’s data and send it to the server via internet. As a result, the developed energy monitoring system can successfully record the voltage, current, active power, power factor, frequency, accumulative power consumption and tariff. Consumers will be able to
see their electricity usage and the tariff according to the energy usage in real-time through web and mobile application. In case of any fault e.g., short circuit or power supply cut off, the consumer will receive a text message on his mobile number. Moreover, consumers will be able to receive the tariff on a weekly or monthly basis.
The project “Design a Talking Energy Meter based on Microcontroller” is design such that whenever the usage of energy exceeds the threshold value which is set by user, it announces an alert message which was already predefined in the voice circuit. The SMS of monthly billing status is also sends on user’s mobile number which is mentioned in program.
An efficient and improved model for power theft detection in PakistanjournalBEEI
This paper describes an improved model for the monitoring of power used by a party such as household users and different industries in Pakistan. The power theft detection was done using the intelligent internet of things (IoT) service system for calculating the user's power simultaneously. The power meter catches a theft detection device that is instantly transmitted to the central system which compares both the data by means of microcontroller and if there is any difference found, it informs the power utility about the hooking, meter relief or theft activities happen. Information of the theft detection through the global mobile communications system is transmitted and notified theft is displayed on the terminal monitor or won. As a result, although consumers continue to use excess fuel, the customer's power supply is cut in the electricity boards segment. The general radio package module system sends central circuit and meter data via an internet protocol address to a web server. GSM's IoT based perception is used to monitor the power supply and billing information calculated with a microcontroller continuously with the determination of the electricity table area. With this unit, the duplicate user can be located at the rear of the electricity office with the power meter status.
IOT BASED POWER GRID MONITORING & CONTROL SYSTEMvivatechijri
Energy generation corporations provide electricity to any or all the households via intermediate controlled power transmission hubs referred to as Electricity Grid. Generally issues arise thanks to failure of the electricity grid resulting in black out of a complete space that was obtaining provide from that individual grid. This project aims to resolve this downside victimization IOT because the means that of communication and conjointly coping with numerous alternative problems that a wise system will traumatize to avoid needless losses to the Energy producers.
IoT Based Smart Energy Meter using Raspberry Pi and Arduino Bilal Amjad
This project, design and implemented a low-cost IoT based energy monitoring system (smart energy meter) for real-time monitoring of all electrical parameters i.e. AC voltage, AC current, active power, total energy consumption, power factor, frequency, and tariff. The design is based on a low-cost PZEM-004T, using a non-invasive Current Transformer
(CT) sensors, Arduino and Raspberry pi. Electrical measurements are done by PZEM-004T and CT sensors through Arduino. Raspberry pi communicates with Arduino through serial communication to retrieve these sensor’s data and send it to the server via internet. As a result, the developed energy monitoring system can successfully record the voltage, current, active power, power factor, frequency, accumulative power consumption and tariff. Consumers will be able to
see their electricity usage and the tariff according to the energy usage in real-time through web and mobile application. In case of any fault e.g., short circuit or power supply cut off, the consumer will receive a text message on his mobile number. Moreover, consumers will be able to receive the tariff on a weekly or monthly basis.
The project “Design a Talking Energy Meter based on Microcontroller” is design such that whenever the usage of energy exceeds the threshold value which is set by user, it announces an alert message which was already predefined in the voice circuit. The SMS of monthly billing status is also sends on user’s mobile number which is mentioned in program.
Electricity is a necessity in the modern world. In the traditional power system, electricity is being generated and transmitted through a one-way transmission and distribution system called the grid. The smart grid is an intelligent power grid designed to handle distributed resources using communication technology employing smart meters and control system. It promises more efficient, secure and climate friendly power system.
Design of smart wireless changeover for continuous electric current feeding f...IJECEIAES
Electric power has become a vital element for life today. Despite this importance, electric power consumers in Iraq suffer from the problem of noncontinuity and daily electric power supply interruption. This problem led to the use of various sources of electric power as an alternative to compensate for the shortage of electric power provided by the Iraqi national grid. In this work, a smart wireless changeover device is designed using wireless sensor networks technology aiming to solve problem caused by the multiplicity of power sources received at home and governmental buildings in Iraq by controlling operation of some electrical devices (which consume high current) in the home or workplace automatically when changing source of electricity from one to another. This solution will help to ensure the continuity of electric current feeding from power sources of variable capacities, also, to rationalize power consumption by assigning an operation priority to electric devices. Furthermore, a statistical measurement as a case study was performed in a building with a total power consumption of 160.8 KW/h. The result showed that the device functions effectively and it is capable of achieving an average saving in power of about 50% to 86% depending on the applied priorities and case study scenario.
this slide shows what is smart grid ,its comparison between the electromechanical grids . smart meters and devises for the smart grid . benefit of smart grid . and a conclution
This proposal discusses the benefits of the smart meters and demonstrates how badly Pakistan needs it in order to reduce line losses, electricity theft and in-efficient use of electricity.
On Going research on Problems Faced In smart grid in general. Yet Work is in progress Just a light notes on General issues in smart grid, Technically work is to be on target in smart grid.
Electricity is a necessity in the modern world. In the traditional power system, electricity is being generated and transmitted through a one-way transmission and distribution system called the grid. The smart grid is an intelligent power grid designed to handle distributed resources using communication technology employing smart meters and control system. It promises more efficient, secure and climate friendly power system.
Design of smart wireless changeover for continuous electric current feeding f...IJECEIAES
Electric power has become a vital element for life today. Despite this importance, electric power consumers in Iraq suffer from the problem of noncontinuity and daily electric power supply interruption. This problem led to the use of various sources of electric power as an alternative to compensate for the shortage of electric power provided by the Iraqi national grid. In this work, a smart wireless changeover device is designed using wireless sensor networks technology aiming to solve problem caused by the multiplicity of power sources received at home and governmental buildings in Iraq by controlling operation of some electrical devices (which consume high current) in the home or workplace automatically when changing source of electricity from one to another. This solution will help to ensure the continuity of electric current feeding from power sources of variable capacities, also, to rationalize power consumption by assigning an operation priority to electric devices. Furthermore, a statistical measurement as a case study was performed in a building with a total power consumption of 160.8 KW/h. The result showed that the device functions effectively and it is capable of achieving an average saving in power of about 50% to 86% depending on the applied priorities and case study scenario.
this slide shows what is smart grid ,its comparison between the electromechanical grids . smart meters and devises for the smart grid . benefit of smart grid . and a conclution
This proposal discusses the benefits of the smart meters and demonstrates how badly Pakistan needs it in order to reduce line losses, electricity theft and in-efficient use of electricity.
On Going research on Problems Faced In smart grid in general. Yet Work is in progress Just a light notes on General issues in smart grid, Technically work is to be on target in smart grid.
Power distribution system fault monitoring device for supply networks in NigeriaIJECEIAES
Electric power is the bedrock of our modern way of life. In Nigeria, power supply availability, sufficiency and reliability are major operational challenges. At the generation and transmission level, effort is made to ensure status monitoring and fault detection on the power network, but at the distribution level, particularly within domestic consumer communities there are no fault monitoring and detection devices except for HRC fuses at the feeder pillar. Unfortunately, these fuses are sometimes replaced by a copper wire bridge at some locations rendering the system unprotected and creating a great potential for transformer destruction on overload. This study is focused on designing an on-site power system monitoring device to be deployed on selected household entry power cables for detecting and indicating when phase off, low voltage, high voltage, over current, and blown fuse occurs on the building’s incomer line. The fault indication will help in reducing troubleshooting time and also ensure quick service restoration. After design implementation, the test result confirms design accuracy, device functionality and suitability as a low-cost solution to power supply system fault monitoring within local communities.
In our country we are facing tremendous problems because of electricity shortage and the J&K state is on top. We are considered rich in production of electricity but the truth is we are not getting the desired. The solution is implementation of latest and emerging technologies like IOT and Microcontrollers in electrical domain. The paper describes the need of technology for load shedding process. Itika Sharma | Shavet Sharma"Load Shedding Management" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018, URL: http://www.ijtsrd.com/papers/ijtsrd18364.pdf http://www.ijtsrd.com/engineering/electrical-engineering/18364/load-shedding-management/itika-sharma
DISTRIBUTED TRANSFORMER ENERGY METER USING GSM TECHNOLOGYecij
The Distributed transformer meter is located in all user building blocks and a server is preserved from the facility contributor. The electricity is major part for consuming the energy level with cost and obtaining the energy used by customers can be maintain in every sequence of manual process is very difficult to identify. There are some common techniques that are used by customers for theft and leakage of power in one particular transformer and these robberies are detected using GSM. These meters provide the automatic readings data with help of Apriori algorithm. It will reduce the labor task and financial expenditure by adopting the automatic meter reading is to provide the bill entry process. This is very useful and helps to
households consumers.
Power theft detection using IoT and Arduino is a system that detects electricity theft in real-time. The system uses a current sensor to monitor the flow of electricity and sends the data to an Arduino board. The board analyzes the data and sends a notification to the user's smartphone if it detects any unusual activity or theft. The system can also be connected to the electricity grid and can be used to automatically cut off the power supply to the specific location where the theft is occurring. This technology can help reduce power theft and improve the overall efficiency and reliability of the electricity grid.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.