This document describes an automated targeting system for open space military areas using an ultrasonic sensor mounted on a servo motor. The system uses an Arduino microcontroller connected to the ultrasonic sensor and servo motor. When the ultrasonic sensor detects an object within its range, it will trigger the buzzer and display the detection on an LCD screen. The system aims to allow military surveillance of open areas using low-cost components like ultrasonic sensors and servos controlled by an Arduino.
Controlling and Reducing of Speed for Vehicles Automatically By Using Rf Tech...IJERA Editor
For vehicle safety and safety for passengers in vehicle is an important parameter. Most of the vehicles get
accident because no proper safety measures are taken especially at curves and hair pin bends humps and any
obstacles in front of the vehicle. This system can be used for the prevention of such a problem by indicating a
pre indication and also reducing the speed of vehicles by reducing the fuel rate of vehicle. As the action is in
terms of fuel rate so the vehicle automatically goes to control and avoids the accidents. At curves and hair pin
bends the line of sight is not possible for the drivers so the special kind of transmitter which is tuned at a
frequency of 433MHZ are mounted as these transmitters continuously radiate a RF signal for some particular
area. As the vehicle come within this radiation the receiver in the vehicle gets activate. The transmitter used here
is a coded transmitter which is encoded with encoder. The encoder provides a 4 bit binary data which is serially
transmitted to transmitter. The transmitter used here is ASK type (amplitude shift keying) which emits the RF
radiation.
Controlling and Reducing of Speed for Vehicles Automatically By Using Rf Tech...IJERA Editor
For vehicle safety and safety for passengers in vehicle is an important parameter. Most of the vehicles get
accident because no proper safety measures are taken especially at curves and hair pin bends humps and any
obstacles in front of the vehicle. This system can be used for the prevention of such a problem by indicating a
pre indication and also reducing the speed of vehicles by reducing the fuel rate of vehicle. As the action is in
terms of fuel rate so the vehicle automatically goes to control and avoids the accidents. At curves and hair pin
bends the line of sight is not possible for the drivers so the special kind of transmitter which is tuned at a
frequency of 433MHZ are mounted as these transmitters continuously radiate a RF signal for some particular
area. As the vehicle come within this radiation the receiver in the vehicle gets activate. The transmitter used here
is a coded transmitter which is encoded with encoder. The encoder provides a 4 bit binary data which is serially
transmitted to transmitter. The transmitter used here is ASK type (amplitude shift keying) which emits the RF
radiation.
Navigation system for blind using GPS & GSMPrateek Anand
Currently, blind people use a traditional cane as a tool for directing them when they move from one place to another. Although, the traditional cane is the most widespread means that is used today by the visually impaired people, it could not help them to detect dangers from all levels of obstacles. In this context, we propose a new intelligent system for guiding individuals who are blind or partially sighted. The system is used to enable blind people to move with the same ease and confidence as a sighted people. The system is linked with a GSM-GPS module to pin-point the location of the blind person and to establish a two way communication path in a wireless fashion. Moreover, it provides the direction information as well as information to avoid obstacles based on ultrasonic sensors. A beeper, an accelerometer sensor and vibrator are also added to the system. The whole system is designed to be small, light and is used in conjunction with the white cane. The results have shown that the blinds that used this system could move independently and safely.
My solution for this involves IoT device fixed on the safety jacket which is called Smart safety jacket.The Smart Safety Jacket enables complete safety of the employees working in mining and construction industries by installing a different type of sensors like Temperature sensor, Humidity sensor, Ultrasonic sensor, Motion sensor, Gas sensor, Sound sensor, RFID, Emergency Panel, and Notification Panel. These sensors connected to the network through Wi-Fi makes more relevant and valuable ever than before. In case of emergency, immediate notification will be sent to an admin who is monitoring entire miners in the mining industry and immediate action will be taken to rescue miner from the hazard.
The whole process can be stated in two points.
1. The miner has to wear the smart safety jacket (connected with the sensors) which is connected to the control room via a network.
2. A Monitor in the control room who is continuously monitoring the miners and the mining site should check the hazard status and alert and rescue the miners in case of any critical situation.
Thus the mining environment and miners will be protected from the hazard.
Ijeee 33-36-surveillance system for coal mines based on wireless sensor networkKumar Goud
Abstract: The foremost critical task for coal mine is of keeping track of miners spread out across a large mining areas .It becomes even difficult when mine tunnels collapse. Many mines use a radio system to track miners, but when a collapse occurs, the base stations connected by a thin wire often are rendered useless. In this project to overcome the demerits of radio system we used wireless technology for tracking the miners. For this purpose a small RF transmitter module is equipped to each person entering a mine. Each transceiver placed in the mine look after the location of miners. The transceivers communicate with base stations through Zigbee module. In addition of tracking the location of miners we also include sensors such as temperature & humidity to intimate the base station & miners when some atmosphere changes occur. Mine operators are now able to monitor the real-time locations of each miner to better pinpoint their locations in the event of an emergency. Even after a full-day of use, mine operators can locate an individual miner within ten feet.
Key Words: Wireless sensor networks (WSN), ZIGBEE, and LPC2148.
Security System Based on Ultrasonic Sensor TechnologyIOSR Journals
Abstract : In this paper we design and implement a security system with an ultrasonic sensor module to enhance the system’s reliability. The ultrasonic sensor contains a transmitter and a receiver and the module is placed in a rotating motor. It is assumed that an ultrasonic sensor is set in a rotating motor to cover a wide range. The Ultrasonic transmitter periodically emits ultrasonic signals into an open area. A rotating motor is used to allow the sensor to cover whole 360 degrees. If the signal ever hits any physical objects, it will be reflected back and the receiver part of the sensor will then capture it. The microcontroller unit (MCU) will constantly check for the receiver output of the ultrasonic transmitter. If the receiver output is high, the MCU will perform distance analysis of the object from the sensor using the fact that ultrasonic waves travel in air at 340m/s. The time taken for the waves to hit the object and return can be calculated as the time taken for the receiver output to be high after the transmitter has been initiated to send ultrasonic waves. Once the distance is calculated, MCU checks whether the object is within the range threshold specified within the MCU for initiating the alert. If the object is within the range threshold, the MCU initiates a sound alarm and also the global system for mobile communications (GSM) modem to send short message service (SMS) or call to the concerned person. Keywords: GSM Module,Microcontroller unit(MCU),Motor controller driver unit,Ultrasonic sensor(obstacles detection).
Radar Arduino system is a simulation of radar using various micro-components. Ultrasonic sensor is used to detect and measure the distance of an obstacle. Simulation has been performed on Tinkercad software.
Navigation system for blind using GPS & GSMPrateek Anand
Currently, blind people use a traditional cane as a tool for directing them when they move from one place to another. Although, the traditional cane is the most widespread means that is used today by the visually impaired people, it could not help them to detect dangers from all levels of obstacles. In this context, we propose a new intelligent system for guiding individuals who are blind or partially sighted. The system is used to enable blind people to move with the same ease and confidence as a sighted people. The system is linked with a GSM-GPS module to pin-point the location of the blind person and to establish a two way communication path in a wireless fashion. Moreover, it provides the direction information as well as information to avoid obstacles based on ultrasonic sensors. A beeper, an accelerometer sensor and vibrator are also added to the system. The whole system is designed to be small, light and is used in conjunction with the white cane. The results have shown that the blinds that used this system could move independently and safely.
My solution for this involves IoT device fixed on the safety jacket which is called Smart safety jacket.The Smart Safety Jacket enables complete safety of the employees working in mining and construction industries by installing a different type of sensors like Temperature sensor, Humidity sensor, Ultrasonic sensor, Motion sensor, Gas sensor, Sound sensor, RFID, Emergency Panel, and Notification Panel. These sensors connected to the network through Wi-Fi makes more relevant and valuable ever than before. In case of emergency, immediate notification will be sent to an admin who is monitoring entire miners in the mining industry and immediate action will be taken to rescue miner from the hazard.
The whole process can be stated in two points.
1. The miner has to wear the smart safety jacket (connected with the sensors) which is connected to the control room via a network.
2. A Monitor in the control room who is continuously monitoring the miners and the mining site should check the hazard status and alert and rescue the miners in case of any critical situation.
Thus the mining environment and miners will be protected from the hazard.
Ijeee 33-36-surveillance system for coal mines based on wireless sensor networkKumar Goud
Abstract: The foremost critical task for coal mine is of keeping track of miners spread out across a large mining areas .It becomes even difficult when mine tunnels collapse. Many mines use a radio system to track miners, but when a collapse occurs, the base stations connected by a thin wire often are rendered useless. In this project to overcome the demerits of radio system we used wireless technology for tracking the miners. For this purpose a small RF transmitter module is equipped to each person entering a mine. Each transceiver placed in the mine look after the location of miners. The transceivers communicate with base stations through Zigbee module. In addition of tracking the location of miners we also include sensors such as temperature & humidity to intimate the base station & miners when some atmosphere changes occur. Mine operators are now able to monitor the real-time locations of each miner to better pinpoint their locations in the event of an emergency. Even after a full-day of use, mine operators can locate an individual miner within ten feet.
Key Words: Wireless sensor networks (WSN), ZIGBEE, and LPC2148.
Security System Based on Ultrasonic Sensor TechnologyIOSR Journals
Abstract : In this paper we design and implement a security system with an ultrasonic sensor module to enhance the system’s reliability. The ultrasonic sensor contains a transmitter and a receiver and the module is placed in a rotating motor. It is assumed that an ultrasonic sensor is set in a rotating motor to cover a wide range. The Ultrasonic transmitter periodically emits ultrasonic signals into an open area. A rotating motor is used to allow the sensor to cover whole 360 degrees. If the signal ever hits any physical objects, it will be reflected back and the receiver part of the sensor will then capture it. The microcontroller unit (MCU) will constantly check for the receiver output of the ultrasonic transmitter. If the receiver output is high, the MCU will perform distance analysis of the object from the sensor using the fact that ultrasonic waves travel in air at 340m/s. The time taken for the waves to hit the object and return can be calculated as the time taken for the receiver output to be high after the transmitter has been initiated to send ultrasonic waves. Once the distance is calculated, MCU checks whether the object is within the range threshold specified within the MCU for initiating the alert. If the object is within the range threshold, the MCU initiates a sound alarm and also the global system for mobile communications (GSM) modem to send short message service (SMS) or call to the concerned person. Keywords: GSM Module,Microcontroller unit(MCU),Motor controller driver unit,Ultrasonic sensor(obstacles detection).
Radar Arduino system is a simulation of radar using various micro-components. Ultrasonic sensor is used to detect and measure the distance of an obstacle. Simulation has been performed on Tinkercad software.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.