Implementation of secure rfid on fpga
•Download as PPTX, PDF•
0 likes•628 views
The document discusses a project to implement a secure RFID system using FPGA and a microcontroller. The project members are Sahil Sood, Anshul Gupta, and Paras Thakur, guided by Mr. Dheeraj Kumar. The proposed system aims to address privacy and security issues in RFID systems like traceability. It will use a hardware implementation of an RFID tag with a secure mutual authentication protocol between the tag and reader. The system will be simulated using ISE simulator and synthesized using Xilinx tools before being implemented on FPGA and microcontroller hardware.
Report
Share
Report
Share
Recommended
Asic vs fpga
Introduction of FPGA , types &manufacture, structure, types of switch block, Programmable connection, Logic block, Design methodology, commercial tools, Why replace FPGA by ASIC, Design Flow Comparison, ASIC Design Flow, FPGA vs ASIC
Fpga vs asic
FPGAs are faster, cheaper, and smaller than ASICs for small applications but ASICs are faster, cheaper, and smaller for large, complex applications due to their ability to be optimized for a specific application. FPGAs consume more power and take less time to design than ASICs which require more complex design processes like floor planning and mask production. For these reasons, FPGAs are better for applications requiring fast design time while ASICs are better for high volume applications seeking maximum optimization of speed, cost, size and power.
Security issues in FPGA based systems.
This document discusses managing securities in FPGA-based embedded systems. It begins by outlining benefits of FPGAs like better performance and flexibility. It then discusses using FPGAs for cryptographic applications and the need for isolating plaintext from ciphertext. The document presents a system design with separate memory partitions and cores for different domains. It provides examples of FPGA usage for aviation and surveillance systems. It also covers security issues like design-tool subversion, composition problems, and protecting bitstreams. Potential solutions discussed include life-cycle management, secure architectures using memory protection and tags, and future work in multi-core systems and dynamic reconfiguration.
ASIC vs FPGA
FPGAs allow for reconfigurable circuitry, easier entry with lower costs, and are well-suited for applications that may require frequent design upgrades. However, FPGAs are less energy efficient, have lower maximum operating frequencies, and do not support analog designs compared to ASICs. While FPGAs are useful for prototyping, ASICs are better suited for high-volume mass production since their circuitry is permanently optimized for a specific application.
The comparison between FPGA , ARDUINO , ASIC
This document compares Arduino, FPGA, and ASIC. It describes Arduino as an open source physical computing platform used for interactive projects and prototyping with sensors and actuators. It is inexpensive but has limited processing power. FPGA is reprogrammable, more powerful than microcontrollers, and can implement complex logic, but is more expensive. ASIC is custom-made for specific applications, very small, cannot be altered, and has the lowest unit cost but design is not reusable.
FPGA Introduction
FPGA stands for Field Programmable Gate Array. It allows designers to change their designs late in the development cycle or even after deployment through field upgrades. An FPGA consists of Configurable Logic Blocks (CLBs) containing look-up tables, flip-flops, and logic functions. It also includes interconnect routing resources and I/O blocks. Memory blocks and clock management resources are integrated into the FPGA to support a wide range of applications across many industries.
KaiSemi - FPGA to ASIC Conversions
KaiSemi provides FPGA to ASIC, ASIC to ASIC, and DSP to ASIC conversions to reduce production costs for customers. They use in-house tools to directly convert netlists with no changes to functional source code, providing a drop-in replacement chip within 6-14 weeks. KaiSemi handles the entire conversion process with no upfront costs to customers and guarantees functionality of the replacement chip.
Compare between FPGA , ARDUINO , ASIC ..
Arduino is a small, inexpensive board used for physical computing projects and sensors. FPGA is a medium-sized programmable chip used in military applications, data centers, medical devices, and testing. ASIC is a very small, non-programmable chip designed for specific applications like smartphones and used where speed and security are important.
Recommended
Asic vs fpga
Introduction of FPGA , types &manufacture, structure, types of switch block, Programmable connection, Logic block, Design methodology, commercial tools, Why replace FPGA by ASIC, Design Flow Comparison, ASIC Design Flow, FPGA vs ASIC
Fpga vs asic
FPGAs are faster, cheaper, and smaller than ASICs for small applications but ASICs are faster, cheaper, and smaller for large, complex applications due to their ability to be optimized for a specific application. FPGAs consume more power and take less time to design than ASICs which require more complex design processes like floor planning and mask production. For these reasons, FPGAs are better for applications requiring fast design time while ASICs are better for high volume applications seeking maximum optimization of speed, cost, size and power.
Security issues in FPGA based systems.
This document discusses managing securities in FPGA-based embedded systems. It begins by outlining benefits of FPGAs like better performance and flexibility. It then discusses using FPGAs for cryptographic applications and the need for isolating plaintext from ciphertext. The document presents a system design with separate memory partitions and cores for different domains. It provides examples of FPGA usage for aviation and surveillance systems. It also covers security issues like design-tool subversion, composition problems, and protecting bitstreams. Potential solutions discussed include life-cycle management, secure architectures using memory protection and tags, and future work in multi-core systems and dynamic reconfiguration.
ASIC vs FPGA
FPGAs allow for reconfigurable circuitry, easier entry with lower costs, and are well-suited for applications that may require frequent design upgrades. However, FPGAs are less energy efficient, have lower maximum operating frequencies, and do not support analog designs compared to ASICs. While FPGAs are useful for prototyping, ASICs are better suited for high-volume mass production since their circuitry is permanently optimized for a specific application.
The comparison between FPGA , ARDUINO , ASIC
This document compares Arduino, FPGA, and ASIC. It describes Arduino as an open source physical computing platform used for interactive projects and prototyping with sensors and actuators. It is inexpensive but has limited processing power. FPGA is reprogrammable, more powerful than microcontrollers, and can implement complex logic, but is more expensive. ASIC is custom-made for specific applications, very small, cannot be altered, and has the lowest unit cost but design is not reusable.
FPGA Introduction
FPGA stands for Field Programmable Gate Array. It allows designers to change their designs late in the development cycle or even after deployment through field upgrades. An FPGA consists of Configurable Logic Blocks (CLBs) containing look-up tables, flip-flops, and logic functions. It also includes interconnect routing resources and I/O blocks. Memory blocks and clock management resources are integrated into the FPGA to support a wide range of applications across many industries.
KaiSemi - FPGA to ASIC Conversions
KaiSemi provides FPGA to ASIC, ASIC to ASIC, and DSP to ASIC conversions to reduce production costs for customers. They use in-house tools to directly convert netlists with no changes to functional source code, providing a drop-in replacement chip within 6-14 weeks. KaiSemi handles the entire conversion process with no upfront costs to customers and guarantees functionality of the replacement chip.
Compare between FPGA , ARDUINO , ASIC ..
Arduino is a small, inexpensive board used for physical computing projects and sensors. FPGA is a medium-sized programmable chip used in military applications, data centers, medical devices, and testing. ASIC is a very small, non-programmable chip designed for specific applications like smartphones and used where speed and security are important.
ASIC vs SOC vs FPGA
Confused on what exactly is difference between an ASIC, ASSP, FPGA and SOC - this explains the fundamental differences
Programmable logic device (PLD)
This document discusses programmable logic devices (PLDs) like field programmable gate arrays (FPGAs). It provides details on FPGA types and vendors like Xilinx. FPGAs offer efficient resource utilization and flexibility. Xilinx is a major FPGA vendor and the document describes Xilinx FPGA families and features. It also includes an example VHDL code for a half adder circuit implemented on an FPGA.
SoC~FPGA~ASIC~Embedded
Jasmin Ibrahimovic is a senior design and verification consultant with over 20 years of experience in FPGA, SoC, and ASIC development. She specializes in hardware-assisted computing, interfaces, and microarchitectures. She has worked on mission-critical and carrier-class electronic products across various industries including computing, networking, wireless, and more. Her experience includes roles at Qualcomm, Chili.CHIPS, AMCC, Copper Mountain Networks, Nortel Networks, Gandalf Data, and Energoinvest/IRCA.
ASIC DESIGN FLOW
This document outlines the typical ASIC design flow process. It begins with specification where the features and functionalities of the ASIC are defined. This is followed by RTL coding to develop the logic functionality in a hardware description language. Simulation and synthesis then convert the RTL into a gate-level netlist. Pre-layout timing analysis checks for timing issues. Then automatic place and route lays out the design on the chip. Back annotation adds layout parasitic information. Post-layout timing analysis checks for real timing violations. Logic verification confirms correct functionality. The final tapeout step sends the design for fabrication if all checks pass.
Asic design lect1 2 august 28 2012
The document discusses different types of application specific integrated circuits (ASICs). It describes ASICs as integrated circuits customized for a particular application, as opposed to standard integrated circuits. The document outlines two main types of ASICs: full-custom ASICs which have all logic cells and mask layers customized, and semi-custom ASICs which use pre-designed logic cells but have customized mask layers. Within semi-custom ASICs it distinguishes between standard cell-based and gate array-based designs. The document also covers programmable ASICs including PLDs, CPLDs and FPGAs.
Asic
Application specific integrated circuits (ASICs) are microchips designed for special applications. There are two types: full-custom ASICs where all logic cells and mask layers are customized, and semi-custom where pre-designed logic cells have some customizable mask layers. ASICs have advantages over FPGAs like lower costs, higher speeds, and lower power usage, but have higher design costs and longer development times. Common applications of ASICs include aerospace systems, high-performance processors, and specialized consumer electronics.
Digital VLSI Design and FPGA Implementation
This document provides an overview of digital VLSI design and FPGA implementation training. The objective of the training is to provide exposure to VLSI engineering concepts and design methodologies relevant to industry needs. The training covers VLSI fundamentals, digital design, VHDL, FPGA implementation, and includes hands-on labs. Students will learn to design digital circuits using VHDL and will simulate and implement designs on FPGAs. After completing the training, students will be able to design any digital circuit using VHDL.
Fpga design flow
The FPGA design flow document outlines the typical steps for designing an FPGA including: 1) specification and system-level simulation, 2) device selection between Xilinx and Altera, 3) design entry using languages like Verilog and VHDL, 4) functional simulation, 5) synthesis, 6) placement and routing (P&R), 7) timing simulation, and 8) programming and debugging the final design on hardware.
FPGAs : An Overview
This presenation is intended to give an overview of the FPGAs, designing using FPGA and related technologies.
Fpga asic technologies_flow
This document provides an overview of an ASIC/FPGA technology and design flow course. It discusses the course organization, material, schedule, and recommended literature. The course will cover FPGA and ASIC design flows, including Verilog, synthesis, simulation, and implementation. It will also discuss chip structures, technologies, applications and the semiconductor industry. Students will complete projects to design an FPGA peripheral and an ASIC, with design reviews to mimic industry practice. The goal is to prepare students for careers in chip design and verification.
FPGA
This presentation describes FPGA, advantages and disadvantages, design, programming, and application.
SoC FPGA Technology
The document provides a history of digital logic and programmable logic devices such as PLDs, CPLDs, and ASICs. It describes the advantages of FPGAs over other technologies including lower costs, faster time to market, and easier design changes. The architecture of FPGAs is explained including logic blocks, interconnects, embedded memory and DSP blocks. Modern SoC FPGAs integrate an ARM processor for improved performance. Applications include automotive, wireless, military, and medical imaging systems.
Programmable Hardware - An Overview
This document provides an overview of programmable hardware and field programmable gate arrays (FPGAs). It discusses the different types of logic devices, including fixed and programmable. Programmable logic devices allow users to specify the logic functions through programming and include PLA and PAL devices. FPGAs are then introduced as reprogrammable logic devices with configurable logic blocks and interconnects. The document outlines SRAM-based and flash-based FPGA implementation technologies and describes the architecture, advantages, and applications of FPGAs while also noting limitations such as higher costs compared to ASIC chips.
FPGA Overview
An FPGA (field programmable gate array) is a reprogrammable silicon chip that can be configured to perform different logic functions. It allows for personalized hardware design without physical chips and wiring. FPGAs offer parallel processing capabilities across different sections of the chip. They contain programmable logic blocks and routing resources that can be configured using hardware description languages. FPGAs provide advantages over processors like true parallel processing, high reliability, maintenance flexibility, and performance that exceeds DSPs. They are useful for applications like signal processing, robotics, and prototyping.
FPGA workshop
FPGA introduction for absolute beginners
- What is inside FPGA (Altera example)
- What are the major differences between firmware development for MCU and FPGA
- Some very basics of Verilog HDL language (by similarities with C/C++)
- Testbench approach and Icarus simulator demonstration
- Altera Quartus IDE demonstration -- creating project, compilation, and download
- Signal-Tap internal logic analyzer demonstration
(Verilog source code examples attached inside presentation)
Complex Programmable Logic Device (CPLD) Architecture and Its Applications
A CPLD (complex programmable logic device) chip includes several circuit blocks on a single chip with inside wiring resources to attach the circuit blocks. Each circuit block is comparable to a PLA or a PAL.
Fundamentals of FPGA
This document provides an introduction to FPGA design fundamentals including:
- Programmable logic devices like PLDs, CPLDs, and FPGAs which allow for reconfigurable logic circuits.
- The basic architecture of FPGAs including configurable logic blocks (CLBs), input/output blocks (IOBs), and a programmable interconnect structure.
- Verilog and VHDL as common hardware description languages used for FPGA design entry and simulation.
- A simple example of designing a half-adder circuit in VHDL, including entity, architecture, and behavioral modeling style.
Complex Programmable Logic Devices(CPLD) & Field Programmable Logic Devices (...
This document discusses the architecture of CPLDs and FPGAs. CPLDs consist of PAL-like blocks, I/O blocks, and a programmable interconnect structure. FPGAs consist of an array of configurable logic blocks, I/O blocks, and programmable row and column interconnect channels. The document compares CPLDs and FPGAs, noting that FPGAs have a more complex architecture and unpredictable delays while CPLDs are less complex, cheaper, and have more predictable delays. The conclusion restates that the document discussed the architecture of CPLDs and FPGAs and listed their comparisons.
FPGA_Overview_Ibr_2014
This presentation introduces coarse-grained FPGAs like the Xilinx 7 series and Altera 10/V series. It compares the features of different FPGAs, including logic elements, slices/ALMs, registers, memory blocks, and DSPs. The internal structures of slices and DSP blocks for some FPGAs are shown. In conclusion, the presentation provides an overview and comparison of coarse-grained FPGA capabilities and architectures.
FPGA Intro
This document discusses field programmable gate arrays (FPGAs) and complex programmable logic devices (CPLDs). It begins with an introduction to programmable logic technology and compares application specific integrated circuits, programmable logic devices, FPGAs, and CPLDs. Key differences between FPGAs and CPLDs are that FPGAs contain over 100,000 logic blocks while CPLDs typically contain thousands of logic gates. FPGAs also offer higher complexity and can implement high-grade data processing, while CPLDs offer moderate data processing. The document then discusses FPGA and CPLD families, performance, and technical development differences compared to microcontrollers. It provides block diagrams of C
5.[26 35] rfid security using mini des algorithm in deployment of bike rentin...
The document describes an RFID-based bike rental system that uses miniDES encryption on RFID tags to securely store bike identifiers. Key points:
1) RFID tags attached to bikes are encrypted with miniDES to securely store bike IDs readable only by authenticated readers.
2) A microcontroller decrypts tag data and verifies bike IDs, recording check-out and check-in times from an RTC to calculate rental fees.
3) .NET software receives bike data from the microcontroller via serial to manage a database of bike statuses, rental fees, and a web portal interface.
5.[26 35] rfid security using mini des algorithm in deployment of bike rentin...
RFID tags are used to automate a bike renting system. Each bike is tagged with a passive RFID tag storing a unique ID encrypted with the miniDES algorithm. RFID readers scan the tags and send the encrypted IDs to a microcontroller for decryption and authentication. The microcontroller verifies the IDs and records rental data like user, bike ID, and timestamps which is sent to a backend database for management and reporting. The miniDES algorithm provides lightweight encryption suitable for the low-power RFID tags and embedded systems used while ensuring security of rental transactions.
More Related Content
What's hot
ASIC vs SOC vs FPGA
Confused on what exactly is difference between an ASIC, ASSP, FPGA and SOC - this explains the fundamental differences
Programmable logic device (PLD)
This document discusses programmable logic devices (PLDs) like field programmable gate arrays (FPGAs). It provides details on FPGA types and vendors like Xilinx. FPGAs offer efficient resource utilization and flexibility. Xilinx is a major FPGA vendor and the document describes Xilinx FPGA families and features. It also includes an example VHDL code for a half adder circuit implemented on an FPGA.
SoC~FPGA~ASIC~Embedded
Jasmin Ibrahimovic is a senior design and verification consultant with over 20 years of experience in FPGA, SoC, and ASIC development. She specializes in hardware-assisted computing, interfaces, and microarchitectures. She has worked on mission-critical and carrier-class electronic products across various industries including computing, networking, wireless, and more. Her experience includes roles at Qualcomm, Chili.CHIPS, AMCC, Copper Mountain Networks, Nortel Networks, Gandalf Data, and Energoinvest/IRCA.
ASIC DESIGN FLOW
This document outlines the typical ASIC design flow process. It begins with specification where the features and functionalities of the ASIC are defined. This is followed by RTL coding to develop the logic functionality in a hardware description language. Simulation and synthesis then convert the RTL into a gate-level netlist. Pre-layout timing analysis checks for timing issues. Then automatic place and route lays out the design on the chip. Back annotation adds layout parasitic information. Post-layout timing analysis checks for real timing violations. Logic verification confirms correct functionality. The final tapeout step sends the design for fabrication if all checks pass.
Asic design lect1 2 august 28 2012
The document discusses different types of application specific integrated circuits (ASICs). It describes ASICs as integrated circuits customized for a particular application, as opposed to standard integrated circuits. The document outlines two main types of ASICs: full-custom ASICs which have all logic cells and mask layers customized, and semi-custom ASICs which use pre-designed logic cells but have customized mask layers. Within semi-custom ASICs it distinguishes between standard cell-based and gate array-based designs. The document also covers programmable ASICs including PLDs, CPLDs and FPGAs.
Asic
Application specific integrated circuits (ASICs) are microchips designed for special applications. There are two types: full-custom ASICs where all logic cells and mask layers are customized, and semi-custom where pre-designed logic cells have some customizable mask layers. ASICs have advantages over FPGAs like lower costs, higher speeds, and lower power usage, but have higher design costs and longer development times. Common applications of ASICs include aerospace systems, high-performance processors, and specialized consumer electronics.
Digital VLSI Design and FPGA Implementation
This document provides an overview of digital VLSI design and FPGA implementation training. The objective of the training is to provide exposure to VLSI engineering concepts and design methodologies relevant to industry needs. The training covers VLSI fundamentals, digital design, VHDL, FPGA implementation, and includes hands-on labs. Students will learn to design digital circuits using VHDL and will simulate and implement designs on FPGAs. After completing the training, students will be able to design any digital circuit using VHDL.
Fpga design flow
The FPGA design flow document outlines the typical steps for designing an FPGA including: 1) specification and system-level simulation, 2) device selection between Xilinx and Altera, 3) design entry using languages like Verilog and VHDL, 4) functional simulation, 5) synthesis, 6) placement and routing (P&R), 7) timing simulation, and 8) programming and debugging the final design on hardware.
FPGAs : An Overview
This presenation is intended to give an overview of the FPGAs, designing using FPGA and related technologies.
Fpga asic technologies_flow
This document provides an overview of an ASIC/FPGA technology and design flow course. It discusses the course organization, material, schedule, and recommended literature. The course will cover FPGA and ASIC design flows, including Verilog, synthesis, simulation, and implementation. It will also discuss chip structures, technologies, applications and the semiconductor industry. Students will complete projects to design an FPGA peripheral and an ASIC, with design reviews to mimic industry practice. The goal is to prepare students for careers in chip design and verification.
FPGA
This presentation describes FPGA, advantages and disadvantages, design, programming, and application.
SoC FPGA Technology
The document provides a history of digital logic and programmable logic devices such as PLDs, CPLDs, and ASICs. It describes the advantages of FPGAs over other technologies including lower costs, faster time to market, and easier design changes. The architecture of FPGAs is explained including logic blocks, interconnects, embedded memory and DSP blocks. Modern SoC FPGAs integrate an ARM processor for improved performance. Applications include automotive, wireless, military, and medical imaging systems.
Programmable Hardware - An Overview
This document provides an overview of programmable hardware and field programmable gate arrays (FPGAs). It discusses the different types of logic devices, including fixed and programmable. Programmable logic devices allow users to specify the logic functions through programming and include PLA and PAL devices. FPGAs are then introduced as reprogrammable logic devices with configurable logic blocks and interconnects. The document outlines SRAM-based and flash-based FPGA implementation technologies and describes the architecture, advantages, and applications of FPGAs while also noting limitations such as higher costs compared to ASIC chips.
FPGA Overview
An FPGA (field programmable gate array) is a reprogrammable silicon chip that can be configured to perform different logic functions. It allows for personalized hardware design without physical chips and wiring. FPGAs offer parallel processing capabilities across different sections of the chip. They contain programmable logic blocks and routing resources that can be configured using hardware description languages. FPGAs provide advantages over processors like true parallel processing, high reliability, maintenance flexibility, and performance that exceeds DSPs. They are useful for applications like signal processing, robotics, and prototyping.
FPGA workshop
FPGA introduction for absolute beginners
- What is inside FPGA (Altera example)
- What are the major differences between firmware development for MCU and FPGA
- Some very basics of Verilog HDL language (by similarities with C/C++)
- Testbench approach and Icarus simulator demonstration
- Altera Quartus IDE demonstration -- creating project, compilation, and download
- Signal-Tap internal logic analyzer demonstration
(Verilog source code examples attached inside presentation)
Complex Programmable Logic Device (CPLD) Architecture and Its Applications
A CPLD (complex programmable logic device) chip includes several circuit blocks on a single chip with inside wiring resources to attach the circuit blocks. Each circuit block is comparable to a PLA or a PAL.
Fundamentals of FPGA
This document provides an introduction to FPGA design fundamentals including:
- Programmable logic devices like PLDs, CPLDs, and FPGAs which allow for reconfigurable logic circuits.
- The basic architecture of FPGAs including configurable logic blocks (CLBs), input/output blocks (IOBs), and a programmable interconnect structure.
- Verilog and VHDL as common hardware description languages used for FPGA design entry and simulation.
- A simple example of designing a half-adder circuit in VHDL, including entity, architecture, and behavioral modeling style.
Complex Programmable Logic Devices(CPLD) & Field Programmable Logic Devices (...
This document discusses the architecture of CPLDs and FPGAs. CPLDs consist of PAL-like blocks, I/O blocks, and a programmable interconnect structure. FPGAs consist of an array of configurable logic blocks, I/O blocks, and programmable row and column interconnect channels. The document compares CPLDs and FPGAs, noting that FPGAs have a more complex architecture and unpredictable delays while CPLDs are less complex, cheaper, and have more predictable delays. The conclusion restates that the document discussed the architecture of CPLDs and FPGAs and listed their comparisons.
FPGA_Overview_Ibr_2014
This presentation introduces coarse-grained FPGAs like the Xilinx 7 series and Altera 10/V series. It compares the features of different FPGAs, including logic elements, slices/ALMs, registers, memory blocks, and DSPs. The internal structures of slices and DSP blocks for some FPGAs are shown. In conclusion, the presentation provides an overview and comparison of coarse-grained FPGA capabilities and architectures.
FPGA Intro
This document discusses field programmable gate arrays (FPGAs) and complex programmable logic devices (CPLDs). It begins with an introduction to programmable logic technology and compares application specific integrated circuits, programmable logic devices, FPGAs, and CPLDs. Key differences between FPGAs and CPLDs are that FPGAs contain over 100,000 logic blocks while CPLDs typically contain thousands of logic gates. FPGAs also offer higher complexity and can implement high-grade data processing, while CPLDs offer moderate data processing. The document then discusses FPGA and CPLD families, performance, and technical development differences compared to microcontrollers. It provides block diagrams of C
What's hot (20)
Complex Programmable Logic Device (CPLD) Architecture and Its Applications
Complex Programmable Logic Device (CPLD) Architecture and Its Applications
Complex Programmable Logic Devices(CPLD) & Field Programmable Logic Devices (...
Complex Programmable Logic Devices(CPLD) & Field Programmable Logic Devices (...
Similar to Implementation of secure rfid on fpga
5.[26 35] rfid security using mini des algorithm in deployment of bike rentin...
The document describes an RFID-based bike rental system that uses miniDES encryption on RFID tags to securely store bike identifiers. Key points:
1) RFID tags attached to bikes are encrypted with miniDES to securely store bike IDs readable only by authenticated readers.
2) A microcontroller decrypts tag data and verifies bike IDs, recording check-out and check-in times from an RTC to calculate rental fees.
3) .NET software receives bike data from the microcontroller via serial to manage a database of bike statuses, rental fees, and a web portal interface.
5.[26 35] rfid security using mini des algorithm in deployment of bike rentin...
RFID tags are used to automate a bike renting system. Each bike is tagged with a passive RFID tag storing a unique ID encrypted with the miniDES algorithm. RFID readers scan the tags and send the encrypted IDs to a microcontroller for decryption and authentication. The microcontroller verifies the IDs and records rental data like user, bike ID, and timestamps which is sent to a backend database for management and reporting. The miniDES algorithm provides lightweight encryption suitable for the low-power RFID tags and embedded systems used while ensuring security of rental transactions.
5.[26 35] rfid security using mini des algorithm in deployment of bike rentin...
The International Institute for Science, Technology and Education (IISTE) , International Journals Call for papaers: http://www.iiste.org/Journals
11. rfid security using mini des algorithm in deployment of bike renting system
The document describes an RFID-based bike rental system that uses miniDES encryption on RFID tags to securely store bike identifiers. Key points:
1) RFID tags attached to bikes are encrypted with miniDES to securely store bike IDs readable only by authenticated readers.
2) A microcontroller decrypts tag data and tracks bike check-ins/check-outs using a real-time clock, communicating data to a .NET application.
3) The .NET system calculates rental charges, displays bike statuses on a web portal, and allows editing rental amounts. This automates the bike rental process using RFID technology and encryption.
C361520
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Enhancement of security in rfid using rsa algorithm
This document discusses enhancing security in RFID systems using the RSA encryption algorithm. It begins with background on RFID technology and its security issues. It then provides an overview of the RSA algorithm and encryption process. The document proposes implementing RSA in the RFID reader to encrypt data transmitted to RFID tags. It describes how RSA would encrypt data over the air interface between readers and tags, improving security against eavesdropping or data manipulation. Finally, it provides a simple example encrypting a password using a public key and decrypting it with a private key, demonstrating how RSA could enhance RFID security.
RFID based smart shopping cart and billing system
To make the shopping easy by automated billing at the shopping mall/ super maeket. This module mainly cocnsists of Arduino, RFID tags & reader and zigbee module.
Mypptinslideshare 180508104046 (1)
This document describes an RFID-based smart shopping cart and billing system project. The system uses RFID tags attached to products to automatically identify items placed in the cart and track them for billing purposes. Key features include displaying product information and price on an LCD screen on the cart, allowing payment via RFID credit card within the cart or at checkout, and sending an SMS receipt. The system aims to make shopping and billing more convenient and efficient by automating processes using RFID and wireless communication technologies like Zigbee and GSM.
Student tracking _managemenet_web_based_system
This document summarizes a student tracking and management system using RFID technology. The system uses RFID readers and tags to identify students. Readers are connected to a monitoring computer via GSM modules to transmit identification data via SMS, GPRS, or email. The monitoring computer stores tracking data and can notify parents. Algorithms are provided for reading tags, checking a database, and transmitting data. The system provides a way to identify and track students both inside and outside of a facility.
Need NFC RFID-Tomorrow Is Today in This Constant State of Innovation
This document discusses near-field communications (NFC) and radio frequency identification (RFID) technology. It proposes using the Maxim Integrated MAX66242 chip, a secure dual-interface passive tag, to easily add contactless NFC/RFID capabilities to embedded electronic products. The MAX66242 uses SHA-256 encryption and challenge-response authentication to securely transfer data between a reader and tag. It also allows for data protection and limiting tag usage through various memory protection modes. Overall, the document promotes using NFC/RFID technology and the MAX66242 chip to enable new wireless capabilities and applications for portable electronic devices.
Rfid based access control system using microcontroller
RFID Security Access Control System using 8051 Microcontroller is an RFID Technology based security system.
Using this system, authorization of personnel is carried out with an RFID card and only those with access can enter a secured area.
The security of any organisation is a priority for the authorities. The security concern is for the physical property and also for the intellectual property.
For this reason automatic identification and access control system has become necessary to overcome the security threats faced by many organisations.
This project deals with an interesting manner of security access control with the help of RFID Technology, where only people with valid cards are allowed to access the door or any secure area.
Secured authentication of radio-frequency identification system using PRESENT...
This document presents a study on securing authentication in an Internet of Things (IoT)-based radio-frequency identification (RFID) system using the lightweight PRESENT block cipher algorithm. The PRESENT-256 cipher is used to mutually authenticate an RFID tag and reader in a two-stage process: tag recognition by the reader and mutual authentication between the tag and reader using PRESENT-80/128/256 cipher modules in electronic codebook mode. The authentication scheme is simulated using FPGA results verified with ChipScope tools. Resource usage is analyzed and found improved compared to existing PRESENT ciphers and lightweight algorithms. The secured authentication approach is also compared favorably to similar RFID mutual authentication methods.
G05215356
1. The document describes a system for encrypting data in real-time using a field programmable gate array (FPGA). The FPGA encrypts a stream of data from a personal computer using an algorithm written in VHDL and stores the encrypted data in a data logger.
2. The encryption algorithm uses three levels of logic gates (XOR, NAND, OR) applied sequentially to encrypt each byte of data. The FPGA, PC, and data logger are connected to transfer plain data from the PC to the FPGA for encryption and then to the data logger for storage.
3. The system was tested with a sample byte of data and successfully encrypted and stored it, demonstrating proof of concept
Zigbee Based Indoor Campus Inventory Tracking Using Rfid Module
This document summarizes an RFID and Zigbee-based indoor campus inventory tracking system. It describes how RFID tags attached to objects can be identified and tracked using RFID readers. Zigbee modules are used to wirelessly transmit inventory data from the readers to a central server. The system uses passive RFID tags powered by electromagnetic fields from readers. When a tagged object enters the read range, its data is transmitted via Zigbee to allow centralized tracking of inventory across a campus.
Sdfgh
This document provides an overview of an RFID and GSM based security system project. The system uses an RFID card to identify authorized users and allow entry if their card ID matches the stored information. If an unauthorized card is used, a buzzer sounds and an SMS is sent. The document describes the system components including the microcontroller, RFID tags and readers, GSM module. It provides block and circuit diagrams of the system and discusses how RFID and microcontrollers work. The objectives are to control access and notify authorities by SMS of unauthorized access attempts.
Ijarcet vol-2-issue-3-867-869
This document discusses using cryptography and RFID systems for network security. It begins with an introduction to cryptography as an ancient method of encrypting messages for secure transmission. It then describes RFID technology, which uses radio waves to identify objects tagged with RFID transponders. The document proposes using both cryptography and RFID for network security to achieve benefits like data confidentiality, integrity, authentication and access control. It outlines potential applications of RFID in areas like animal tracking, individual records maintenance and banking security. Finally, it concludes that combining RFID and cryptography can provide a higher degree of user and data authentication for network security compared to using each approach alone.
IRJET- Examination Room Guidance System using RFID and Arduino
The document proposes an examination room guidance system using RFID technology, where each student is issued an RFID card containing their exam details. The system includes an RFID reader, tags, Arduino, LCD display and LEDs, such that when a student's tag is scanned their exam room and seat number will be displayed to guide them to the correct location. The proposed system aims to help students easily find their exam rooms and seats, reducing stress and saving time compared to traditional jumbling systems.
Rfid
The document outlines a proposed design for a radio frequency identification (RFID) system security method. It begins with an introduction and background on RFID technology and security concerns. It then presents the methodology, which involves analyzing security threats and devising an attack taxonomy. The document proposes a cryptographic authentication protocol for RFID tags that provides mutual authentication, untraceability, and resistance to various attacks. It uses encryption techniques like keyed hash functions to authenticate tags and readers while maintaining low computation and communication costs suitable for passive RFID tags.
Monitoring and Centering a Remote Discrete Using Rfid through Sim Module
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
IRJET - RFID based Automatic Entry Restricted Mechanism for Home Security
This document describes a RFID-based automatic door locking system for home security. The system uses an Arduino nano microcontroller, RFID reader and tags, wireless transmitter and receiver modules, NodeMCU for WiFi connectivity, a 3x4 keypad, and servo motor. The system provides three ways to unlock the door - using a password via keypad, detecting an authorized RFID tag, or using a mobile application. It aims to remotely control the door unlock via a web connection and message passing between the owner and door lock for increased security and convenience.
Similar to Implementation of secure rfid on fpga (20)
5.[26 35] rfid security using mini des algorithm in deployment of bike rentin...
5.[26 35] rfid security using mini des algorithm in deployment of bike rentin...
5.[26 35] rfid security using mini des algorithm in deployment of bike rentin...
5.[26 35] rfid security using mini des algorithm in deployment of bike rentin...
5.[26 35] rfid security using mini des algorithm in deployment of bike rentin...
5.[26 35] rfid security using mini des algorithm in deployment of bike rentin...
11. rfid security using mini des algorithm in deployment of bike renting system
11. rfid security using mini des algorithm in deployment of bike renting system
Enhancement of security in rfid using rsa algorithm
Enhancement of security in rfid using rsa algorithm
Need NFC RFID-Tomorrow Is Today in This Constant State of Innovation
Need NFC RFID-Tomorrow Is Today in This Constant State of Innovation
Rfid based access control system using microcontroller
Rfid based access control system using microcontroller
Secured authentication of radio-frequency identification system using PRESENT...
Secured authentication of radio-frequency identification system using PRESENT...
Zigbee Based Indoor Campus Inventory Tracking Using Rfid Module
Zigbee Based Indoor Campus Inventory Tracking Using Rfid Module
IRJET- Examination Room Guidance System using RFID and Arduino
IRJET- Examination Room Guidance System using RFID and Arduino
Monitoring and Centering a Remote Discrete Using Rfid through Sim Module
Monitoring and Centering a Remote Discrete Using Rfid through Sim Module
IRJET - RFID based Automatic Entry Restricted Mechanism for Home Security
IRJET - RFID based Automatic Entry Restricted Mechanism for Home Security
Recently uploaded
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Mechatronics material . Mechanical engineering
Mechatronics is a multidisciplinary field that refers to the skill sets needed in the contemporary, advanced automated manufacturing industry. At the intersection of mechanics, electronics, and computing, mechatronics specialists create simpler, smarter systems. Mechatronics is an essential foundation for the expected growth in automation and manufacturing.
Mechatronics deals with robotics, control systems, and electro-mechanical systems.
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
smart pill dispenser is designed to improve medication adherence and safety f...
Smart Pill Dispenser that boosts medication adherence, empowers patients, enables remote monitoring, enhances safety, reduces healthcare costs, and contributes to data-driven healthcare improvements
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Accident detection system project report.pdf
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
Recently uploaded (20)
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
smart pill dispenser is designed to improve medication adherence and safety f...
smart pill dispenser is designed to improve medication adherence and safety f...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Zener Diode and its V-I Characteristics and Applications
Zener Diode and its V-I Characteristics and Applications
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
Implementation of secure rfid on fpga
- 1. PROJECT GROUP: SAHIL SOOD(101098) ANSHUL GUPTA(101100) PARAS THAKUR(101102) PROJECT GUIDE: MR. DHEERAJ KUMAR.
- 2. INTRODUCTION. RFID. FPGA. AUTHENTICATION SCHEMES.
- 3. RFID systems consist of RFID tags and RFID readers or interrogators. RFID tags are small, wireless devices that help identify objects and people. Even though RFID system is widely useful for industrial and individual applications, RFID tag has a serious privacy problem, i.e., traceability. To protect users from tracing, we proposed a hardware implementation of RFID with secure mutual authentication protocol.
- 4. The proposed system will be simulated using ISE simulator and synthesized using Xilinx synthesis technology. The system will be implemented in hardware using field programmable gate array(FPGA) and microcontroller.
- 5. data leakage . data traceability. Password hack. authentication process occurs over an insecure channel due to weak authentication protocols.
- 6. RADIO-FREQUENCY identification (RFID) is a contact-less identification technology that enables remote and automated gathering and sending of information between RFID tag’s or transponders and readers or interrogators using a wireless link.
- 7. It is composed of three main components: tag, reader and Server. TAG: Tag’s contain microchips that store the unique identification (ID) of each object. The ID is a serial number stored in the RFID memory. There are three types of tag’s the passive, semi-active and active.
- 8. READER: It reads tag’s data through the RFID antennas at a certain frequency. Basically, the reader is an electronic apparatus which produce and accept a radio signals. RFID SYSTEM: The RFID tag’s 32-bit Access password and 32-bit kill passwords achieve tag–reader mutual authentication.
- 10. Field Programmable Gate Arrays (FPGAs) are semiconductor devices that are based around a matrix of configurable logic blocks (CLBs) connected via programmable interconnects. FPGAs can be reprogrammed to desired application or functionality requirements after manufacturing
- 11. Padgen: This scheme utilizes the tags 32-bit access and kill password in achieving tag-reader mutual authentication scheme. It uses two rounds of PadGen to compute a cover-coding pad. The PadGen function is used to create the 16-bit Pads for covercoding the access password.
- 12. Access Password: An access password is required before data are exchanged between a reader and a single tag. The access password is a 32-bit value stored in the tag's reserved memory. Kill Password: The access passwords can be used in activating kill commands to permanently shut down tag's, as well as for accessing and re locking a tag's memory.
- 13. To improve the security level of the original reader-to-tag authentication protocol proposed under the EPC C1G2 speciation, the PadGen functions are used to protect the Access password against exposure. The main advantage of the proposed scheme is that it does not require the implementation of any special cryptography hash functions/keys within the tag and a centerserver/database. The PadGen functions based on XOR operation and MOD operation in association with the tags Apwd and Kpwd are used to generate the PADi.