Quality Assurance Programme in Computed TomographyRamzee Small
Introduction to Computed Tomography
Basic description of the components of a CT System
Introduction to Quality Assurance
Quality Assurance and Quality Control Tests in Computed Tomography base on frequency
Objective of QA/QC Test
Quality Assurance Programme in Computed TomographyRamzee Small
Introduction to Computed Tomography
Basic description of the components of a CT System
Introduction to Quality Assurance
Quality Assurance and Quality Control Tests in Computed Tomography base on frequency
Objective of QA/QC Test
Image Quality, Artifacts and it's Remedies in CT-Avinesh ShresthaAvinesh Shrestha
CT is one of the frequently used diagnostic imaging modalities in Radiology. Knowledge about image quality and artifacts is essential when diagnosing a patient with the help of CT images. Moreover, Radiology Technologist's should be very well aware about the ways to identify and eliminate or minimize the artifacts in CT for better image quality.
The resolution and performance of an optical microscope can be characterized by a quantity known as the modulation transfer function (MTF), which is a measurement of the microscope's ability to transfer contrast from the specimen to the intermediate image plane at a specific resolution.
Image Quality, Artifacts and it's Remedies in CT-Avinesh ShresthaAvinesh Shrestha
CT is one of the frequently used diagnostic imaging modalities in Radiology. Knowledge about image quality and artifacts is essential when diagnosing a patient with the help of CT images. Moreover, Radiology Technologist's should be very well aware about the ways to identify and eliminate or minimize the artifacts in CT for better image quality.
The resolution and performance of an optical microscope can be characterized by a quantity known as the modulation transfer function (MTF), which is a measurement of the microscope's ability to transfer contrast from the specimen to the intermediate image plane at a specific resolution.
basic and brief but informative knowledge about what is Gamma Camera... easy to understand as well as presenting during lectures and in classes . share it
Dual Tracer Single Acquisition Imaging in Nuclear MedicineTom Heston MD
Presented at the 33rd annual meeting of the Missouri Valley Chapter of the Society of Nuclear Medicine, 2011. In this presentation I discuss the concept of dual tracer single acquisition imaging, the historical background, and my experiences with the technique using F-18 FDG and NaF.
Constant updating of load spectra, evolution of standards, regulations, rules and calculation methods has increased the importance of seismic evaluation of NPP structures.
Few rules to be followed like:
•Equipments are classified as Class I, Class II and Class-III.
•ASME Section III Div 1 subsection NB, NC, ND based on the seismic safety class of the equipment.
•Supports qualified as per ASME section III Div 1 subsection NF.
Recent advances in radiographic technique /certified fixed orthodontic course...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
Brief discussion on the Quality Assurance and Quality Control in Magnetic Resonance Imaging department.
Quality assurance in MRI is a comprehensive concept that comprises all of the management practices developed by the MR imaging team.
A summary of recent innovations in radiation oncology focussing on the priniciples of different techniques and their application. An overview of clinical results has also been given
Novel adaptive filter (naf) for impulse noise suppression from digital imagesijbbjournal
In general, it is known that an adaptive filter adjusts its parameters iteratively such as size of the working
window, decision threshold values used in two stage detection-estimation based switching filters, number of
iterations etc. It is also known that nonlinear filters such as median filters and its several variants are
popularly known for their ability in dealing with the unknown circumstances. In this paper an efficient and
simple adaptive nonlinear filtering scheme is presented to eliminate the impulse noise from the digital images with an impulsive noise detection and reduction scheme based on adaptive nonlinear filter techniques. The proposed scheme employs image statistics based dynamically varying working window and an adaptive threshold for noise detection with a Noise Exclusive Median (NEM) based restoration. The intensity value of the Noise Exclusive Median (NEM) is derived from the processed pixels in local
neighborhood of a dynamically adaptive window. In the proposed scheme use of an adaptive threshold value derived from the noisy image statistics returns more precise results for the noisy pixel detection. The
proposed scheme is simple and can be implemented as either a single pass or a multi-pass with a maximum
of three iterations with a simple stopping criterion. The goodness of the proposed scheme is evaluated with respect to the qualitative and quantitative measures obtained by MATLAB simulations with standard images added with impulsive noise of varying densities. From the comparative analysis it is evident that the proposed scheme out performs the state-of-art schemes, preferably in cases of high-density impulse noise
Frequency based criterion for distinguishing tonal and noisy spectral componentsCSCJournals
A frequency-based criterion for distinguishing tonal and noisy spectral components is proposed. For considered spectral local maximum two instantaneous frequency estimates are determined and the difference between them is used in order to verify whether component is noisy or tonal. Since one of the estimators was invented specially for this application its properties are deeply examined. The proposed criterion is applied to the stationary and nonstationary sinusoids in order to examine its efficiency.
Image fusion can be defined as the process by which several images or some of their features
are combined together to form a fused image. Its aim is to combine maximum information
from multiple images of the same scene such that the obtained new image is more suitable for
human visual and machine perception or further image processing and analysis tasks. The
fusion of images acquired from dissimilar modalities or instrument has been successfully used
for remote sensing images. The biomedical image fusion plays an important role in analysis
towards clinical application which can support more accurate information for physician to
diagnose different diseases.
EVP Plus Software delivers state-of-the-art image processing for CR and DR sy...Carestream
Radiographic technologists expect a high degree of
automation and efficiency in the technology they use in their
daily workflow, which means they expect minimal interaction
with the technology’s modality software. At the same time,
radiologists also need the flexibility to specify their site’s
individualized diagnostic viewing preferences. The CARESTREAM DirectView EVP Plus Software successfully
overcomes this challenge for digital-projection radiography.
EVP Plus automatically processes and delivers diagnostic-quality DR and CR images to PACS, based on look preferences that can be uniquely specified by each site.
Study and Analysis of Impulse Noise Reduction Filterssipij
In this paper, a new Decision Based median filtering algorithm is presented for the removal of impulse noise from digital images. Here, we replace the impulse noise corrupted pixel by the median of the pixel scanned in four directions.The signal restoration scheme of this filter adapts to the varied impulse noise ratios while determining an appropriate signal restorer from a reliable neighbourhood. The experimental results of this filter applied on various images corrupted with almost all ratios of impulse noise favour the filter in terms of objectivity and subjectivity than many of the other prominent impulse noise filters.
Image Filtering Using all Neighbor Directional Weighted Pixels: Optimization ...sipij
In this paper a novel approach for de noising images corrupted by random valued impulses has been proposed. Noise suppression is done in two steps. The detection of noisy pixels is done using all neighbor directional weighted pixels (ANDWP) in the 5 x 5 window. The filtering scheme is based on minimum variance of the four directional pixels. In this approach, relatively recent category of stochastic global optimization technique i.e., particle swarm optimization (PSO) has also been used for searching the parameters of detection and filtering operators required for optimal performance. Results obtained shows better de noising and preservation of fine details for highly corrupted images.
This paper contains a report on an Audio-Visual Client Recognition System using Matlab software which identifies five clients and can be improved to identify as many clients as possible depending on the number of clients it is trained to identify which was successfully implemented. The implementation was accomplished first by visual recognition system implemented using The Principal Component Analysis, Linear Discriminant Analysis and Nearest Neighbour Classifier. A successful implementation of second part was achieved by audio recognition using Mel-Frequency Cepstrum Coefficient, Linear Discriminant Analysis and Nearest Neighbour Classifier the system was tested using images and sounds that have not been trained to the system to see whether it can detect an intruder which lead us to a very successful result with précised response to intruder.