This document discusses green computing approaches for internet of things (IoT) systems that aim to minimize energy consumption and guarantee processing delays. It proposes a framework for allocating workloads from IoT devices to edge servers and cloud computing resources in an energy-efficient manner while meeting delay requirements. The framework models the IoT, edge and cloud system, including traffic generation from IoT devices, queuing delays at edge servers, and transmission delays between network components. It analyzes properties of edge server queueing systems and proposes a delay-based workload allocation scheme to minimize energy consumption while controlling processing delays.
This document discusses green computing strategies for the Internet of Things (IoT). It begins by explaining how cloud computing services are used to meet the growing demands of IoT but require large energy-consuming data centers. Green computing aims to reduce the energy consumption of IoT devices and computing infrastructure without compromising performance. The document then evaluates aspects of green computing for IoT, including key concepts like edge computing. It also analyzes challenges of green computing implementation and potential solutions. The document concludes that green computing practices can help build a more sustainable IoT ecosystem by reducing energy usage across devices and infrastructure.
IRJET - Energy Efficient Approach for Data Aggregation in IoTIRJET Journal
This document summarizes a research paper on developing an energy efficient approach for data aggregation in IoT networks. The paper proposes using cache nodes between cluster heads and the base station to reduce energy consumption. It analyzes that the proposed technique of deploying cache nodes performs better than the existing LEACH protocol in terms of packet loss, throughput and energy consumption. The simulation results show that the proposed approach lowers packet loss and energy usage compared to directly transmitting data from cluster heads to the base station.
A Review: The Internet of Things Using Fog ComputingIRJET Journal
Fog computing is a new computing paradigm that processes data and analytics at the edge of the network, rather than sending all data to a centralized cloud. This helps address issues with the cloud-based Internet of Things (IoT) model, such as high latency, bandwidth constraints, location awareness, and mobility. Fog computing brings computing resources closer to IoT devices and end users by using edge devices like routers, switches, and access points as "fog nodes" that can perform analytics and decision making. This allows time-sensitive IoT applications to function more efficiently. Fog computing also helps optimize resource usage by balancing processing between the edge and cloud.
This document summarizes a research paper on green cloud computing. It discusses how cloud computing can help reduce energy consumption and promote more environmentally sustainable IT practices compared to traditional on-site computing. Virtualization is highlighted as a key technology for improving resource utilization and reducing hardware needs. The CLEER model is presented as a tool for analyzing the potential energy savings from transitioning applications to the cloud. Based on this model, a case study found that moving common business software like email and CRM to the cloud in the US could save over 300 petajoules of energy annually.
IRJET- A Smart Medical Monitoring Systems using Cloud Computing and Internet ...IRJET Journal
1. The document proposes a smart medical monitoring system using cloud computing and the Internet of Things. It presents an architecture called RMCPHI that uses body sensors, networks, communication modules, and cloud services to remotely monitor patient health data.
2. The RMCPHI architecture transfers sensor data through gateways to a medical information analysis platform where data is processed and statistics are generated. This allows quick decision making for remote health monitoring and management.
3. The system aims to improve remote patient monitoring by leveraging the flexible resources of cloud computing to handle large volumes of medical data generated by IoT sensors.
This document proposes an e-toll payment system using Azure cloud that automates toll gate payments. The system uses RFID tags attached to vehicles with their registration number embedded. When a vehicle reaches the toll gate, the RFID reader obtains the registration number and sends it to the Azure cloud to check if payment was made using a mobile app. If payment was completed, the cloud responds to open the toll gate. This allows drivers to pay electronically without waiting in queues and avoids using cash. The system aims to reduce congestion and fuel consumption at toll plazas through automated payment verification and toll gate control.
Effect of Mixing and Compaction Temperatures on the Indirect Tensile Strength...IRJET Journal
This document proposes an e-toll payment system using Azure cloud that automates toll payments. A mobile app allows users to pay tolls digitally via wallet, credit/debit cards, or banking. Successful payments are recorded on Azure cloud along with the vehicle's RFID tag ID. At toll gates, RFID readers scan tags and check the cloud to see if payment was made. If so, the gate opens, streamlining the toll process and reducing congestion. The system aims to provide a more convenient cashless toll payment alternative compared to existing smart card or queue-based systems.
IRJET- Smart Building Automation using Internet of ThingsIRJET Journal
This document discusses smart building automation using internet of things technologies. It describes how internet of things technologies can be applied to building automation to create smart buildings that are more efficient and cost effective. Specifically, it discusses using sensors and cloud computing to enable features like predictive maintenance, disaster management, temperature control and smart water management. The goal is for buildings to be able to automatically adjust and optimize operations in response to real-time data to improve efficiency and reduce costs. Smart buildings are seen as an important part of developing smart cities where internet connected technologies are used to better manage resources and services.
This document discusses green computing strategies for the Internet of Things (IoT). It begins by explaining how cloud computing services are used to meet the growing demands of IoT but require large energy-consuming data centers. Green computing aims to reduce the energy consumption of IoT devices and computing infrastructure without compromising performance. The document then evaluates aspects of green computing for IoT, including key concepts like edge computing. It also analyzes challenges of green computing implementation and potential solutions. The document concludes that green computing practices can help build a more sustainable IoT ecosystem by reducing energy usage across devices and infrastructure.
IRJET - Energy Efficient Approach for Data Aggregation in IoTIRJET Journal
This document summarizes a research paper on developing an energy efficient approach for data aggregation in IoT networks. The paper proposes using cache nodes between cluster heads and the base station to reduce energy consumption. It analyzes that the proposed technique of deploying cache nodes performs better than the existing LEACH protocol in terms of packet loss, throughput and energy consumption. The simulation results show that the proposed approach lowers packet loss and energy usage compared to directly transmitting data from cluster heads to the base station.
A Review: The Internet of Things Using Fog ComputingIRJET Journal
Fog computing is a new computing paradigm that processes data and analytics at the edge of the network, rather than sending all data to a centralized cloud. This helps address issues with the cloud-based Internet of Things (IoT) model, such as high latency, bandwidth constraints, location awareness, and mobility. Fog computing brings computing resources closer to IoT devices and end users by using edge devices like routers, switches, and access points as "fog nodes" that can perform analytics and decision making. This allows time-sensitive IoT applications to function more efficiently. Fog computing also helps optimize resource usage by balancing processing between the edge and cloud.
This document summarizes a research paper on green cloud computing. It discusses how cloud computing can help reduce energy consumption and promote more environmentally sustainable IT practices compared to traditional on-site computing. Virtualization is highlighted as a key technology for improving resource utilization and reducing hardware needs. The CLEER model is presented as a tool for analyzing the potential energy savings from transitioning applications to the cloud. Based on this model, a case study found that moving common business software like email and CRM to the cloud in the US could save over 300 petajoules of energy annually.
IRJET- A Smart Medical Monitoring Systems using Cloud Computing and Internet ...IRJET Journal
1. The document proposes a smart medical monitoring system using cloud computing and the Internet of Things. It presents an architecture called RMCPHI that uses body sensors, networks, communication modules, and cloud services to remotely monitor patient health data.
2. The RMCPHI architecture transfers sensor data through gateways to a medical information analysis platform where data is processed and statistics are generated. This allows quick decision making for remote health monitoring and management.
3. The system aims to improve remote patient monitoring by leveraging the flexible resources of cloud computing to handle large volumes of medical data generated by IoT sensors.
This document proposes an e-toll payment system using Azure cloud that automates toll gate payments. The system uses RFID tags attached to vehicles with their registration number embedded. When a vehicle reaches the toll gate, the RFID reader obtains the registration number and sends it to the Azure cloud to check if payment was made using a mobile app. If payment was completed, the cloud responds to open the toll gate. This allows drivers to pay electronically without waiting in queues and avoids using cash. The system aims to reduce congestion and fuel consumption at toll plazas through automated payment verification and toll gate control.
Effect of Mixing and Compaction Temperatures on the Indirect Tensile Strength...IRJET Journal
This document proposes an e-toll payment system using Azure cloud that automates toll payments. A mobile app allows users to pay tolls digitally via wallet, credit/debit cards, or banking. Successful payments are recorded on Azure cloud along with the vehicle's RFID tag ID. At toll gates, RFID readers scan tags and check the cloud to see if payment was made. If so, the gate opens, streamlining the toll process and reducing congestion. The system aims to provide a more convenient cashless toll payment alternative compared to existing smart card or queue-based systems.
IRJET- Smart Building Automation using Internet of ThingsIRJET Journal
This document discusses smart building automation using internet of things technologies. It describes how internet of things technologies can be applied to building automation to create smart buildings that are more efficient and cost effective. Specifically, it discusses using sensors and cloud computing to enable features like predictive maintenance, disaster management, temperature control and smart water management. The goal is for buildings to be able to automatically adjust and optimize operations in response to real-time data to improve efficiency and reduce costs. Smart buildings are seen as an important part of developing smart cities where internet connected technologies are used to better manage resources and services.
The document discusses the use of IoT in the energy industry. It describes how IoT can be applied to remotely monitor energy assets, automate processes, integrate renewable energy sources with the grid, and help consumers reduce energy consumption through smart meters and decision making. Some benefits of IoT include improved reliability, reduced costs and labor, and more eco-friendly measures. Potential challenges involve security, connectivity, integration complexity. Edge computing and infrastructure modernization are proposed as solutions.
IRJET-A Review: IoT and Cloud Computing for Future InternetIRJET Journal
This document reviews the integration of Internet of Things (IoT) and cloud computing for future internet applications. It discusses how IoT allows billions of devices to connect and communicate over networks, while cloud computing provides scalable backend processing and storage. However, there is currently no common framework integrating the two. The document argues that IP Multimedia Subsystem (IMS) communication platform provides the most suitable framework. It then reviews several related works discussing challenges and solutions in integrating IoT and cloud computing. Areas like healthcare, transportation, and environmental monitoring are discussed as domains that could benefit from an IoT and cloud computing integration.
IRJET- Smart Home Application using Internet of ThingsIRJET Journal
This document summarizes a research paper on using Internet of Things (IoT) technology to create a smart home application. It discusses how an Arduino board, Bluetooth module, sensors, relays and other components were used to remotely control lights, HVAC, a doorbell, water pump and more via a smartphone app from up to 10 meters away. It also explores how the operating range could be increased using technologies like Zigbee, Wi-Fi or IP-based networks. In conclusion, the paper demonstrates how IoT can enhance home security, convenience and comfort by enabling remote control of various smart home appliances and systems.
RICE INDUSTRY AUTOMATION TECHNIQUE USING IoT WITH RASPBERRY PI AND PHYTON LAN...IRJET Journal
This document discusses using IoT technology and a Raspberry Pi processor to automate a small-scale rice plant. Specifically, it involves:
1. Connecting sensors and actuators like motors and valves in the rice plant to a Raspberry Pi controller programmed using Python.
2. Connecting the Raspberry Pi to the cloud-based Ubidots platform to monitor and control the rice plant remotely.
3. Developing a dashboard in Ubidots to visualize sensor data and allow remote control of the rice plant equipment through toggling virtual switches.
4. Testing the system by running the Python code to communicate between the hardware, Raspberry Pi, and Ubidots cloud platform for remote monitoring
Job Scheduling Mechanisms in Fog Computing Using Soft Computing Techniques.IRJET Journal
This document discusses job scheduling mechanisms in fog computing using soft computing techniques. It begins with an abstract that introduces fog computing and the need for dynamic load balancing algorithms to efficiently allocate computing resources. It then provides background on fog computing and its advantages over cloud computing for applications requiring low latency. The document discusses different types of scheduling mechanisms (resource, task, workflow, job scheduling) and optimization techniques that can be used, including metaheuristic algorithms like particle swarm optimization and genetic algorithms. It provides details on these algorithms and their application to scheduling in fog computing environments.
IRJET - Development of Cloud System for IoT ApplicationsIRJET Journal
This document discusses the development of cloud systems for IoT applications. It begins with an introduction stating that one major problem IoT faces is storing and managing vast amounts of data generated. It then reviews 6 papers related to IoT cloud platforms, cloud storage systems, developments in cloud and IoT, exploring IoT platform development, minimizing energy consumption and SLA violations in cloud data centers, and IoT data classification. The document concludes that a detailed review of 6 IoT platform development approaches was presented and a framework was proposed to help select approaches based on requirements.
A Review on Internet of Things (IoT) in Agriculture: Benefits, Challenges and...IRJET Journal
This document reviews the use of Internet of Things (IoT) in agriculture, outlining its benefits, challenges, and ways forward. IoT uses sensors, microcontrollers, and cloud computing to monitor crops and environmental conditions, allowing farmers to automate processes like irrigation and increase productivity. Key benefits include remote monitoring, indoor farming, optimized resource use, and real-time data collection. Challenges facing IoT adoption in Nigerian agriculture include lack of infrastructure, skilled workers, funding, and awareness among farmers. The document recommends increased corporate funding, reduced import taxes, workforce training, improved electricity/internet access, and collaboration to address these challenges.
IRJET- A Inference Model for Environment Detection using IoT and SVMIRJET Journal
This document presents a research paper that proposes an inference model for environment detection using IoT and support vector machines (SVM). The model is intended to reduce the large amount of data generated by IoT devices and sent to the cloud. It does this by using SVM machine learning to analyze sensor data from IoT devices and only send data categorized as "harmful" to the cloud. The harmful data can then be viewed on a smartphone by the relevant authorities, allowing them to take steps to improve environmental conditions. The document reviews related literature on IoT and discusses the proposed system architecture, SVM algorithm, and results analyzing sensor data on a desktop. It is concluded that the model develops a unique approach combining IoT, machine learning, cloud
A review on orchestration distributed systems for IoT smart services in fog c...IJECEIAES
This paper provides a review of orchestration distributed systems for IoT smart services in fog computing. The cloud infrastructure alone cannot handle the flow of information with the abundance of data, devices and interactions. Thus, fog computing becomes a new paradigm to overcome the problem. One of the first challenges was to build the orchestration systems to activate the clouds and to execute tasks throughout the whole system that has to be considered to the situation in the large scale of geographical distance, heterogeneity and low latency to support the limitation of cloud computing. Some problems exist for orchestration distributed in fog computing are to fulfil with high reliability and low-delay requirements in the IoT applications system and to form a larger computer network like a fog network, at different geographic sites. This paper reviewed approximately 68 articles on orchestration distributed system for fog computing. The result shows the orchestration distribute system and some of the evaluation criteria for fog computing that have been compared in terms of Borg, Kubernetes, Swarm, Mesos, Aurora, heterogeneity, QoS management, scalability, mobility, federation, and interoperability. The significance of this study is to support the researcher in developing orchestration distributed systems for IoT smart services in fog computing focus on IR4.0 national agenda.
MULTI-ACCESS EDGE COMPUTING ARCHITECTURE AND SMART AGRICULTURE APPLICATION IN...ijmnct
The Ubiquitous Power Internet of Things (UPIoT) is a deep integration of the interconnected power
network and communication network, enabling full perception of the system status and business operations
for power production, transmission, and consumption. To address the challenges of real-time perception,
rapid response, and privacy protection, UPIoT can benefit from the use of edge computing technology.
Edge computing is a new and innovative computing architecture that enables quick and efficient
processing of data close to the source, bypassing network latency and bandwidth issues. By shifting
computing power to the edge of the network, edge computing reduces the strain on cloud computing
centers and decreases input response time for users. However, access latency can still be a bottleneck,
which may overshadow the benefits of edge computing, particularly for data-intensive services. While edge
computing offers promising solutions for the IoT network, there are still some issues to address, such as
security, incomplete data, and investment and maintenance costs. In this paper, researcher conducts a
comprehensive survey of edge computing and how edge device placement can improve performance in IoT
networks. The paper includes a comparative use case of smart agriculture edge computing
implementations and discusses the various challenges faced in implementing edge computing in the UPIoT
context. The results also aim to inspire new edge-based IoT security designs by providing a complete
review of IoT security solutions at the edge layer in UPIoT
IRJET- Exploring the Nuances of Internet of Things in Health Care Assisting S...IRJET Journal
The document discusses how the Internet of Things (IoT) is transforming healthcare. IoT connects physical devices like thermometers and weight scales to the internet, allowing real-time patient health data to be digitally collected and analyzed. This enables remote monitoring of patients and facilitates quick healthcare interventions. The document outlines several key IoT technologies that enable healthcare applications, such as smart sensors, gateways, and medical devices with low-power capabilities and graphical interfaces. Overall, the IoT has significant potential to improve healthcare by powering new smart and wireless health systems.
Energy Saving by Virtual Machine Migration in Green Cloud Computingijtsrd
Nowadays the innovations have turned out to be so quick and advanced that enormous all big enterprises have to go for cloud. Cloud provides wide range of services, from high performance computing to storage. Datacenter consisting of servers, network, wires, cooling systems etc. is very important part of cloud as it carries various business information onto the servers. Cloud computing is widely used for large data centers but it causes very serious issues to environment such as heat emission, heavy consumption of energy, release of toxic gases like methane, nitrous oxide, carbon dioxide, etc. High energy consumption leads to high operational cost as well as low profit. So we required Green cloud computing, which very environment friendly and energy efficient version of the cloud computing. In this paper the major issues related to cloud computing is discussed. And the various techniques used to minimize the power consumption are also discussed. Ruhi D. Viroja | Dharmendra H. Viroja"Energy Saving by Virtual Machine Migration in Green Cloud Computing" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-1 | Issue-1 , December 2016, URL: http://www.ijtsrd.com/papers/ijtsrd104.pdf http://www.ijtsrd.com/engineering/computer-engineering/104/energy-saving-by-virtual-machine-migration-in-green-cloud-computing/ruhi-d-viroja
Implementation of an Efficient Smart Home System using MQTTIRJET Journal
This document summarizes a research paper that proposes an efficient smart home system using MQTT (Message Queuing Telemetry Transport) protocol. It describes the system architecture which includes a home controller, community management system connected to cloud platforms. Sensors and devices in the home send data to the controller and community system, which then transmits it to cloud servers for remote monitoring and control. The paper evaluates MQTT and HTTP protocols for this system and concludes that MQTT is more suitable due to lower latency, energy consumption, and data traffic. The proposed system aims to automate home operations and provide additional smart services through integration with cloud computing.
Enterprise-level Green ICT Using virtualization to balance energy economicsIJARIDEA Journal
Abstract— The computing industry has been a significant contributor to global warming ever since its
inception. Performance maximization per unit has cost remained the prime focus of academic and industrial
research alike, ignoring environmental impacts in the process if any. However, the infamous global energy
crisis has inevitably pushed power and energy management up the priority list of computing design and
management activities for purely economic reasons today. Green IT lays emphasis on including the
dimensions of environmental sustainability, the offsets of energy efficiency, and the total cost of
disposal and recycling. A green computing initiative must be adaptive and flexible enough to be
able to address problems that keep on increasing in size and complexity with time. Cloud computing concepts
can invariably be applied to reduce e-waste generation. The service oriented architecture lends itself to
incorporating green computing as a process rather than a product. Re-usability, extensibility and flexibility
are some of the key characteristics which are inherent to the cloud and directly help address the vertical
specific challenges to reducing energy consumption in the long run.
Keywords— Cloud computing, Electronic waste, Green Information Technology, Service oriented architecture.
DESIGN OF INTELLIGENT DEVICE TO SAVE STANDBY POWER IN NETWORK ENABLED DEVICESIAEME Publication
This document proposes an Automatic Power Cut-Off and Reset Device (APCRD) to reduce standby power consumption in network-enabled devices. The APCRD would automatically cut power to appliances when they enter standby mode, completely eliminating standby power use. The document analyzes current and projected network device electricity consumption and savings potential from various efficiency approaches. It finds that the APCRD could achieve the highest energy, economic, and emissions savings compared to the Eco Design Directive or best available technologies by fully eliminating standby power in eligible devices.
STEAM++ AN EXTENSIBLE END-TO-END FRAMEWORK FOR DEVELOPING IOT DATA PROCESSING...ijcsit
IoT applications usually rely on cloud computing services to perform data analysis such as filtering, aggregation, classification, pattern detection, and prediction. When applied to specific domains, the IoT needs to deal with unique constraints. Besides the hostile environment such as vibration and electricmagnetic interference, resulting in malfunction, noise, and data loss, industrial plants often have Internet access restricted or unavailable, forcing us to design stand-alone fog and edge computing solutions. In this context, we present STEAM++, a lightweight and extensible framework for real-time data stream processing and decision-making in the network edge, targeting hardware-limited devices, besides proposing a micro-benchmark methodology for assessing embedded IoT applications. In real-case experiments in a semiconductor industry, we processed an entire data flow, from values sensing, processing and analysing data, detecting relevant events, and finally, publishing results to a dashboard. On average, the application consumed less than 500kb RAM and 1.0% of CPU usage, processing up to 239 data packets per second and reducing the output data size to 14% of the input raw data size when notifying events.
oT applications usually rely on cloud computing services to perform data analysis such as filtering,
aggregation, classification, pattern detection, and prediction. When applied to specific domains, the IoT
needs to deal with unique constraints. Besides the hostile environment such as vibration and electric-
magnetic interference, resulting in malfunction, noise, and data loss, industrial plants often have Internet
access restricted or unavailable, forcing us to design stand-alone fog and edge computing solutions.
Green Computing is a way of study of ending reutilizing and rebuilding of computers and electronic devices is overall analysis. The goal of green computing is to reduce the dangerous material increasing the utilization of energy. Green computing implies to practices and ways of utilizing computing resources in an ecofriendly way while maintaining overall computing .green IT refers to computer and information system and IT applications and predominant strategy to help save and enrich an environment, an increase in the eco logical sustainability in today times. Green computing is under consideration of all the business organization and leading companies with the advancement of new technologies and its varieties of applications. In yester years, especially during last 10 years, computer and IT industries realized the importance of going green an addressing the major concern relating to environment and also to minimize the cost which has led to sharp drift in strategy and policy to IT industry. The importance behind this change arise from computing demand and emerging cost of energy, global warning issues ,this paper present ecofriendly initiatives under way in IT industry and in brief covers the main research challenges which are still gazing to meet green computing requirements. Ms. Amritpal Kaur | Ms. Saravjit Kaur "Green Computing: Emerging Issues in IT" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd25311.pdfPaper URL: https://www.ijtsrd.com/engineering/computer-engineering/25311/green-computing-emerging-issues-in-it/ms-amritpal-kaur
Cloud computing is a new technology which refers to an infrastructure where both software and hardware application are operate for the network with the help of internet. Cloud computing provide these services with the help of rule know as you pay as you go on. Internet of things (IoT) is a new technology which is growing rapidly in the field of telecommunications. The aim of IoT devices is to connect all things around us to the internet and thus provide us with smarter cities, intelligent homes and generally more comfortable lives. The combation of cloud computing and IoT devices make rapid development of both technologies. In this paper, we present information about IoT and cloud computing with a focus on the security issues of both technologies. Concluding we present the contribution of cloud computing to the IoT technology. Thus, it shows how the cloud computing technology improves the function of the IoT. Finally present the security challenges of both technologies IoT and cloud computing.
The document discusses the Internet of Things (IoT) and its applications in the real world. It describes IoT as a network of devices connected through hardware, software, sensors and connectivity that allows them to exchange data. The document outlines the seven layers of IoT architecture including the things layer (connected devices), connectivity layer, infrastructure layer, data ingestion layer, data analysis layer, application layer, and people/process layer. It provides examples of IoT applications such as smart cities, smart homes, connected cars, smart supply chains, smart farming, healthcare, and smart retail. The conclusion states that the future of IoT is growing and will save time and improve precision in work processes.
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...IRJET Journal
1) The document discusses the Sungal Tunnel project in Jammu and Kashmir, India, which is being constructed using the New Austrian Tunneling Method (NATM).
2) NATM involves continuous monitoring during construction to adapt to changing ground conditions, and makes extensive use of shotcrete for temporary tunnel support.
3) The methodology section outlines the systematic geotechnical design process for tunnels according to Austrian guidelines, and describes the various steps of NATM tunnel construction including initial and secondary tunnel support.
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTUREIRJET Journal
This study examines the effect of response reduction factors (R factors) on reinforced concrete (RC) framed structures through nonlinear dynamic analysis. Three RC frame models with varying heights (4, 8, and 12 stories) were analyzed in ETABS software under different R factors ranging from 1 to 5. The results showed that displacement increased as the R factor decreased, indicating less linear behavior for lower R factors. Drift also decreased proportionally with increasing R factors from 1 to 5. Shear forces in the frames decreased with higher R factors. In general, R factors of 3 to 5 produced more satisfactory performance with less displacement and drift. The displacement variations between different building heights were consistent at different R factors. This study evaluated how R factors influence
More Related Content
Similar to Green Computing for Internet of Things: Energy Efficient and Delay-Guaranteed Allocation
The document discusses the use of IoT in the energy industry. It describes how IoT can be applied to remotely monitor energy assets, automate processes, integrate renewable energy sources with the grid, and help consumers reduce energy consumption through smart meters and decision making. Some benefits of IoT include improved reliability, reduced costs and labor, and more eco-friendly measures. Potential challenges involve security, connectivity, integration complexity. Edge computing and infrastructure modernization are proposed as solutions.
IRJET-A Review: IoT and Cloud Computing for Future InternetIRJET Journal
This document reviews the integration of Internet of Things (IoT) and cloud computing for future internet applications. It discusses how IoT allows billions of devices to connect and communicate over networks, while cloud computing provides scalable backend processing and storage. However, there is currently no common framework integrating the two. The document argues that IP Multimedia Subsystem (IMS) communication platform provides the most suitable framework. It then reviews several related works discussing challenges and solutions in integrating IoT and cloud computing. Areas like healthcare, transportation, and environmental monitoring are discussed as domains that could benefit from an IoT and cloud computing integration.
IRJET- Smart Home Application using Internet of ThingsIRJET Journal
This document summarizes a research paper on using Internet of Things (IoT) technology to create a smart home application. It discusses how an Arduino board, Bluetooth module, sensors, relays and other components were used to remotely control lights, HVAC, a doorbell, water pump and more via a smartphone app from up to 10 meters away. It also explores how the operating range could be increased using technologies like Zigbee, Wi-Fi or IP-based networks. In conclusion, the paper demonstrates how IoT can enhance home security, convenience and comfort by enabling remote control of various smart home appliances and systems.
RICE INDUSTRY AUTOMATION TECHNIQUE USING IoT WITH RASPBERRY PI AND PHYTON LAN...IRJET Journal
This document discusses using IoT technology and a Raspberry Pi processor to automate a small-scale rice plant. Specifically, it involves:
1. Connecting sensors and actuators like motors and valves in the rice plant to a Raspberry Pi controller programmed using Python.
2. Connecting the Raspberry Pi to the cloud-based Ubidots platform to monitor and control the rice plant remotely.
3. Developing a dashboard in Ubidots to visualize sensor data and allow remote control of the rice plant equipment through toggling virtual switches.
4. Testing the system by running the Python code to communicate between the hardware, Raspberry Pi, and Ubidots cloud platform for remote monitoring
Job Scheduling Mechanisms in Fog Computing Using Soft Computing Techniques.IRJET Journal
This document discusses job scheduling mechanisms in fog computing using soft computing techniques. It begins with an abstract that introduces fog computing and the need for dynamic load balancing algorithms to efficiently allocate computing resources. It then provides background on fog computing and its advantages over cloud computing for applications requiring low latency. The document discusses different types of scheduling mechanisms (resource, task, workflow, job scheduling) and optimization techniques that can be used, including metaheuristic algorithms like particle swarm optimization and genetic algorithms. It provides details on these algorithms and their application to scheduling in fog computing environments.
IRJET - Development of Cloud System for IoT ApplicationsIRJET Journal
This document discusses the development of cloud systems for IoT applications. It begins with an introduction stating that one major problem IoT faces is storing and managing vast amounts of data generated. It then reviews 6 papers related to IoT cloud platforms, cloud storage systems, developments in cloud and IoT, exploring IoT platform development, minimizing energy consumption and SLA violations in cloud data centers, and IoT data classification. The document concludes that a detailed review of 6 IoT platform development approaches was presented and a framework was proposed to help select approaches based on requirements.
A Review on Internet of Things (IoT) in Agriculture: Benefits, Challenges and...IRJET Journal
This document reviews the use of Internet of Things (IoT) in agriculture, outlining its benefits, challenges, and ways forward. IoT uses sensors, microcontrollers, and cloud computing to monitor crops and environmental conditions, allowing farmers to automate processes like irrigation and increase productivity. Key benefits include remote monitoring, indoor farming, optimized resource use, and real-time data collection. Challenges facing IoT adoption in Nigerian agriculture include lack of infrastructure, skilled workers, funding, and awareness among farmers. The document recommends increased corporate funding, reduced import taxes, workforce training, improved electricity/internet access, and collaboration to address these challenges.
IRJET- A Inference Model for Environment Detection using IoT and SVMIRJET Journal
This document presents a research paper that proposes an inference model for environment detection using IoT and support vector machines (SVM). The model is intended to reduce the large amount of data generated by IoT devices and sent to the cloud. It does this by using SVM machine learning to analyze sensor data from IoT devices and only send data categorized as "harmful" to the cloud. The harmful data can then be viewed on a smartphone by the relevant authorities, allowing them to take steps to improve environmental conditions. The document reviews related literature on IoT and discusses the proposed system architecture, SVM algorithm, and results analyzing sensor data on a desktop. It is concluded that the model develops a unique approach combining IoT, machine learning, cloud
A review on orchestration distributed systems for IoT smart services in fog c...IJECEIAES
This paper provides a review of orchestration distributed systems for IoT smart services in fog computing. The cloud infrastructure alone cannot handle the flow of information with the abundance of data, devices and interactions. Thus, fog computing becomes a new paradigm to overcome the problem. One of the first challenges was to build the orchestration systems to activate the clouds and to execute tasks throughout the whole system that has to be considered to the situation in the large scale of geographical distance, heterogeneity and low latency to support the limitation of cloud computing. Some problems exist for orchestration distributed in fog computing are to fulfil with high reliability and low-delay requirements in the IoT applications system and to form a larger computer network like a fog network, at different geographic sites. This paper reviewed approximately 68 articles on orchestration distributed system for fog computing. The result shows the orchestration distribute system and some of the evaluation criteria for fog computing that have been compared in terms of Borg, Kubernetes, Swarm, Mesos, Aurora, heterogeneity, QoS management, scalability, mobility, federation, and interoperability. The significance of this study is to support the researcher in developing orchestration distributed systems for IoT smart services in fog computing focus on IR4.0 national agenda.
MULTI-ACCESS EDGE COMPUTING ARCHITECTURE AND SMART AGRICULTURE APPLICATION IN...ijmnct
The Ubiquitous Power Internet of Things (UPIoT) is a deep integration of the interconnected power
network and communication network, enabling full perception of the system status and business operations
for power production, transmission, and consumption. To address the challenges of real-time perception,
rapid response, and privacy protection, UPIoT can benefit from the use of edge computing technology.
Edge computing is a new and innovative computing architecture that enables quick and efficient
processing of data close to the source, bypassing network latency and bandwidth issues. By shifting
computing power to the edge of the network, edge computing reduces the strain on cloud computing
centers and decreases input response time for users. However, access latency can still be a bottleneck,
which may overshadow the benefits of edge computing, particularly for data-intensive services. While edge
computing offers promising solutions for the IoT network, there are still some issues to address, such as
security, incomplete data, and investment and maintenance costs. In this paper, researcher conducts a
comprehensive survey of edge computing and how edge device placement can improve performance in IoT
networks. The paper includes a comparative use case of smart agriculture edge computing
implementations and discusses the various challenges faced in implementing edge computing in the UPIoT
context. The results also aim to inspire new edge-based IoT security designs by providing a complete
review of IoT security solutions at the edge layer in UPIoT
IRJET- Exploring the Nuances of Internet of Things in Health Care Assisting S...IRJET Journal
The document discusses how the Internet of Things (IoT) is transforming healthcare. IoT connects physical devices like thermometers and weight scales to the internet, allowing real-time patient health data to be digitally collected and analyzed. This enables remote monitoring of patients and facilitates quick healthcare interventions. The document outlines several key IoT technologies that enable healthcare applications, such as smart sensors, gateways, and medical devices with low-power capabilities and graphical interfaces. Overall, the IoT has significant potential to improve healthcare by powering new smart and wireless health systems.
Energy Saving by Virtual Machine Migration in Green Cloud Computingijtsrd
Nowadays the innovations have turned out to be so quick and advanced that enormous all big enterprises have to go for cloud. Cloud provides wide range of services, from high performance computing to storage. Datacenter consisting of servers, network, wires, cooling systems etc. is very important part of cloud as it carries various business information onto the servers. Cloud computing is widely used for large data centers but it causes very serious issues to environment such as heat emission, heavy consumption of energy, release of toxic gases like methane, nitrous oxide, carbon dioxide, etc. High energy consumption leads to high operational cost as well as low profit. So we required Green cloud computing, which very environment friendly and energy efficient version of the cloud computing. In this paper the major issues related to cloud computing is discussed. And the various techniques used to minimize the power consumption are also discussed. Ruhi D. Viroja | Dharmendra H. Viroja"Energy Saving by Virtual Machine Migration in Green Cloud Computing" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-1 | Issue-1 , December 2016, URL: http://www.ijtsrd.com/papers/ijtsrd104.pdf http://www.ijtsrd.com/engineering/computer-engineering/104/energy-saving-by-virtual-machine-migration-in-green-cloud-computing/ruhi-d-viroja
Implementation of an Efficient Smart Home System using MQTTIRJET Journal
This document summarizes a research paper that proposes an efficient smart home system using MQTT (Message Queuing Telemetry Transport) protocol. It describes the system architecture which includes a home controller, community management system connected to cloud platforms. Sensors and devices in the home send data to the controller and community system, which then transmits it to cloud servers for remote monitoring and control. The paper evaluates MQTT and HTTP protocols for this system and concludes that MQTT is more suitable due to lower latency, energy consumption, and data traffic. The proposed system aims to automate home operations and provide additional smart services through integration with cloud computing.
Enterprise-level Green ICT Using virtualization to balance energy economicsIJARIDEA Journal
Abstract— The computing industry has been a significant contributor to global warming ever since its
inception. Performance maximization per unit has cost remained the prime focus of academic and industrial
research alike, ignoring environmental impacts in the process if any. However, the infamous global energy
crisis has inevitably pushed power and energy management up the priority list of computing design and
management activities for purely economic reasons today. Green IT lays emphasis on including the
dimensions of environmental sustainability, the offsets of energy efficiency, and the total cost of
disposal and recycling. A green computing initiative must be adaptive and flexible enough to be
able to address problems that keep on increasing in size and complexity with time. Cloud computing concepts
can invariably be applied to reduce e-waste generation. The service oriented architecture lends itself to
incorporating green computing as a process rather than a product. Re-usability, extensibility and flexibility
are some of the key characteristics which are inherent to the cloud and directly help address the vertical
specific challenges to reducing energy consumption in the long run.
Keywords— Cloud computing, Electronic waste, Green Information Technology, Service oriented architecture.
DESIGN OF INTELLIGENT DEVICE TO SAVE STANDBY POWER IN NETWORK ENABLED DEVICESIAEME Publication
This document proposes an Automatic Power Cut-Off and Reset Device (APCRD) to reduce standby power consumption in network-enabled devices. The APCRD would automatically cut power to appliances when they enter standby mode, completely eliminating standby power use. The document analyzes current and projected network device electricity consumption and savings potential from various efficiency approaches. It finds that the APCRD could achieve the highest energy, economic, and emissions savings compared to the Eco Design Directive or best available technologies by fully eliminating standby power in eligible devices.
STEAM++ AN EXTENSIBLE END-TO-END FRAMEWORK FOR DEVELOPING IOT DATA PROCESSING...ijcsit
IoT applications usually rely on cloud computing services to perform data analysis such as filtering, aggregation, classification, pattern detection, and prediction. When applied to specific domains, the IoT needs to deal with unique constraints. Besides the hostile environment such as vibration and electricmagnetic interference, resulting in malfunction, noise, and data loss, industrial plants often have Internet access restricted or unavailable, forcing us to design stand-alone fog and edge computing solutions. In this context, we present STEAM++, a lightweight and extensible framework for real-time data stream processing and decision-making in the network edge, targeting hardware-limited devices, besides proposing a micro-benchmark methodology for assessing embedded IoT applications. In real-case experiments in a semiconductor industry, we processed an entire data flow, from values sensing, processing and analysing data, detecting relevant events, and finally, publishing results to a dashboard. On average, the application consumed less than 500kb RAM and 1.0% of CPU usage, processing up to 239 data packets per second and reducing the output data size to 14% of the input raw data size when notifying events.
oT applications usually rely on cloud computing services to perform data analysis such as filtering,
aggregation, classification, pattern detection, and prediction. When applied to specific domains, the IoT
needs to deal with unique constraints. Besides the hostile environment such as vibration and electric-
magnetic interference, resulting in malfunction, noise, and data loss, industrial plants often have Internet
access restricted or unavailable, forcing us to design stand-alone fog and edge computing solutions.
Green Computing is a way of study of ending reutilizing and rebuilding of computers and electronic devices is overall analysis. The goal of green computing is to reduce the dangerous material increasing the utilization of energy. Green computing implies to practices and ways of utilizing computing resources in an ecofriendly way while maintaining overall computing .green IT refers to computer and information system and IT applications and predominant strategy to help save and enrich an environment, an increase in the eco logical sustainability in today times. Green computing is under consideration of all the business organization and leading companies with the advancement of new technologies and its varieties of applications. In yester years, especially during last 10 years, computer and IT industries realized the importance of going green an addressing the major concern relating to environment and also to minimize the cost which has led to sharp drift in strategy and policy to IT industry. The importance behind this change arise from computing demand and emerging cost of energy, global warning issues ,this paper present ecofriendly initiatives under way in IT industry and in brief covers the main research challenges which are still gazing to meet green computing requirements. Ms. Amritpal Kaur | Ms. Saravjit Kaur "Green Computing: Emerging Issues in IT" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd25311.pdfPaper URL: https://www.ijtsrd.com/engineering/computer-engineering/25311/green-computing-emerging-issues-in-it/ms-amritpal-kaur
Cloud computing is a new technology which refers to an infrastructure where both software and hardware application are operate for the network with the help of internet. Cloud computing provide these services with the help of rule know as you pay as you go on. Internet of things (IoT) is a new technology which is growing rapidly in the field of telecommunications. The aim of IoT devices is to connect all things around us to the internet and thus provide us with smarter cities, intelligent homes and generally more comfortable lives. The combation of cloud computing and IoT devices make rapid development of both technologies. In this paper, we present information about IoT and cloud computing with a focus on the security issues of both technologies. Concluding we present the contribution of cloud computing to the IoT technology. Thus, it shows how the cloud computing technology improves the function of the IoT. Finally present the security challenges of both technologies IoT and cloud computing.
The document discusses the Internet of Things (IoT) and its applications in the real world. It describes IoT as a network of devices connected through hardware, software, sensors and connectivity that allows them to exchange data. The document outlines the seven layers of IoT architecture including the things layer (connected devices), connectivity layer, infrastructure layer, data ingestion layer, data analysis layer, application layer, and people/process layer. It provides examples of IoT applications such as smart cities, smart homes, connected cars, smart supply chains, smart farming, healthcare, and smart retail. The conclusion states that the future of IoT is growing and will save time and improve precision in work processes.
Similar to Green Computing for Internet of Things: Energy Efficient and Delay-Guaranteed Allocation (20)
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...IRJET Journal
1) The document discusses the Sungal Tunnel project in Jammu and Kashmir, India, which is being constructed using the New Austrian Tunneling Method (NATM).
2) NATM involves continuous monitoring during construction to adapt to changing ground conditions, and makes extensive use of shotcrete for temporary tunnel support.
3) The methodology section outlines the systematic geotechnical design process for tunnels according to Austrian guidelines, and describes the various steps of NATM tunnel construction including initial and secondary tunnel support.
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTUREIRJET Journal
This study examines the effect of response reduction factors (R factors) on reinforced concrete (RC) framed structures through nonlinear dynamic analysis. Three RC frame models with varying heights (4, 8, and 12 stories) were analyzed in ETABS software under different R factors ranging from 1 to 5. The results showed that displacement increased as the R factor decreased, indicating less linear behavior for lower R factors. Drift also decreased proportionally with increasing R factors from 1 to 5. Shear forces in the frames decreased with higher R factors. In general, R factors of 3 to 5 produced more satisfactory performance with less displacement and drift. The displacement variations between different building heights were consistent at different R factors. This study evaluated how R factors influence
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...IRJET Journal
This study compares the use of Stark Steel and TMT Steel as reinforcement materials in a two-way reinforced concrete slab. Mechanical testing is conducted to determine the tensile strength, yield strength, and other properties of each material. A two-way slab design adhering to codes and standards is executed with both materials. The performance is analyzed in terms of deflection, stability under loads, and displacement. Cost analyses accounting for material, durability, maintenance, and life cycle costs are also conducted. The findings provide insights into the economic and structural implications of each material for reinforcement selection and recommendations on the most suitable material based on the analysis.
Effect of Camber and Angles of Attack on Airfoil CharacteristicsIRJET Journal
This document discusses a study analyzing the effect of camber, position of camber, and angle of attack on the aerodynamic characteristics of airfoils. Sixteen modified asymmetric NACA airfoils were analyzed using computational fluid dynamics (CFD) by varying the camber, camber position, and angle of attack. The results showed the relationship between these parameters and the lift coefficient, drag coefficient, and lift to drag ratio. This provides insight into how changes in airfoil geometry impact aerodynamic performance.
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...IRJET Journal
This document reviews the progress and challenges of aluminum-based metal matrix composites (MMCs), focusing on their fabrication processes and applications. It discusses how various aluminum MMCs have been developed using reinforcements like borides, carbides, oxides, and nitrides to improve mechanical and wear properties. These composites have gained prominence for their lightweight, high-strength and corrosion resistance properties. The document also examines recent advancements in fabrication techniques for aluminum MMCs and their growing applications in industries such as aerospace and automotive. However, it notes that challenges remain around issues like improper mixing of reinforcements and reducing reinforcement agglomeration.
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...IRJET Journal
This document discusses research on using graph neural networks (GNNs) for dynamic optimization of public transportation networks in real-time. GNNs represent transit networks as graphs with nodes as stops and edges as connections. The GNN model aims to optimize networks using real-time data on vehicle locations, arrival times, and passenger loads. This helps increase mobility, decrease traffic, and improve efficiency. The system continuously trains and infers to adapt to changing transit conditions, providing decision support tools. While research has focused on performance, more work is needed on security, socio-economic impacts, contextual generalization of models, continuous learning approaches, and effective real-time visualization.
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...IRJET Journal
This document summarizes a research project that aims to compare the structural performance of conventional slab and grid slab systems in multi-story buildings using ETABS software. The study will analyze both symmetric and asymmetric building models under various loading conditions. Parameters like deflections, moments, shears, and stresses will be examined to evaluate the structural effectiveness of each slab type. The results will provide insights into the comparative behavior of conventional and grid slabs to help engineers and architects select appropriate slab systems based on building layouts and design requirements.
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...IRJET Journal
This document summarizes and reviews a research paper on the seismic response of reinforced concrete (RC) structures with plan and vertical irregularities, with and without infill walls. It discusses how infill walls can improve or reduce the seismic performance of RC buildings, depending on factors like wall layout, height distribution, connection to the frame, and relative stiffness of walls and frames. The reviewed research paper analyzes the behavior of infill walls, effects of vertical irregularities, and seismic performance of high-rise structures under linear static and dynamic analysis. It studies response characteristics like story drift, deflection and shear. The document also provides literature on similar research investigating the effects of infill walls, soft stories, plan irregularities, and different
This document provides a review of machine learning techniques used in Advanced Driver Assistance Systems (ADAS). It begins with an abstract that summarizes key applications of machine learning in ADAS, including object detection, recognition, and decision-making. The introduction discusses the integration of machine learning in ADAS and how it is transforming vehicle safety. The literature review then examines several research papers on topics like lightweight deep learning models for object detection and lane detection models using image processing. It concludes by discussing challenges and opportunities in the field, such as improving algorithm robustness and adaptability.
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...IRJET Journal
The document analyzes temperature and precipitation trends in Asosa District, Benishangul Gumuz Region, Ethiopia from 1993 to 2022 based on data from the local meteorological station. The results show:
1) The average maximum and minimum annual temperatures have generally decreased over time, with maximum temperatures decreasing by a factor of -0.0341 and minimum by -0.0152.
2) Mann-Kendall tests found the decreasing temperature trends to be statistically significant for annual maximum temperatures but not for annual minimum temperatures.
3) Annual precipitation in Asosa District showed a statistically significant increasing trend.
The conclusions recommend development planners account for rising summer precipitation and declining temperatures in
P.E.B. Framed Structure Design and Analysis Using STAAD ProIRJET Journal
This document discusses the design and analysis of pre-engineered building (PEB) framed structures using STAAD Pro software. It provides an overview of PEBs, including that they are designed off-site with building trusses and beams produced in a factory. STAAD Pro is identified as a key tool for modeling, analyzing, and designing PEBs to ensure their performance and safety under various load scenarios. The document outlines modeling structural parts in STAAD Pro, evaluating structural reactions, assigning loads, and following international design codes and standards. In summary, STAAD Pro is used to design and analyze PEB framed structures to ensure safety and code compliance.
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...IRJET Journal
This document provides a review of research on innovative fiber integration methods for reinforcing concrete structures. It discusses studies that have explored using carbon fiber reinforced polymer (CFRP) composites with recycled plastic aggregates to develop more sustainable strengthening techniques. It also examines using ultra-high performance fiber reinforced concrete to improve shear strength in beams. Additional topics covered include the dynamic responses of FRP-strengthened beams under static and impact loads, and the performance of preloaded CFRP-strengthened fiber reinforced concrete beams. The review highlights the potential of fiber composites to enable more sustainable and resilient construction practices.
Survey Paper on Cloud-Based Secured Healthcare SystemIRJET Journal
This document summarizes a survey on securing patient healthcare data in cloud-based systems. It discusses using technologies like facial recognition, smart cards, and cloud computing combined with strong encryption to securely store patient data. The survey found that healthcare professionals believe digitizing patient records and storing them in a centralized cloud system would improve access during emergencies and enable more efficient care compared to paper-based systems. However, ensuring privacy and security of patient data is paramount as healthcare incorporates these digital technologies.
Review on studies and research on widening of existing concrete bridgesIRJET Journal
This document summarizes several studies that have been conducted on widening existing concrete bridges. It describes a study from China that examined load distribution factors for a bridge widened with composite steel-concrete girders. It also outlines challenges and solutions for widening a bridge in the UAE, including replacing bearings and stitching the new and existing structures. Additionally, it discusses two bridge widening projects in New Zealand that involved adding precast beams and stitching to connect structures. Finally, safety measures and challenges for strengthening a historic bridge in Switzerland under live traffic are presented.
React based fullstack edtech web applicationIRJET Journal
The document describes the architecture of an educational technology web application built using the MERN stack. It discusses the frontend developed with ReactJS, backend with NodeJS and ExpressJS, and MongoDB database. The frontend provides dynamic user interfaces, while the backend offers APIs for authentication, course management, and other functions. MongoDB enables flexible data storage. The architecture aims to provide a scalable, responsive platform for online learning.
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...IRJET Journal
This paper proposes integrating Internet of Things (IoT) and blockchain technologies to help implement objectives of India's National Education Policy (NEP) in the education sector. The paper discusses how blockchain could be used for secure student data management, credential verification, and decentralized learning platforms. IoT devices could create smart classrooms, automate attendance tracking, and enable real-time monitoring. Blockchain would ensure integrity of exam processes and resource allocation, while smart contracts automate agreements. The paper argues this integration has potential to revolutionize education by making it more secure, transparent and efficient, in alignment with NEP goals. However, challenges like infrastructure needs, data privacy, and collaborative efforts are also discussed.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.IRJET Journal
This document provides a review of research on the performance of coconut fibre reinforced concrete. It summarizes several studies that tested different volume fractions and lengths of coconut fibres in concrete mixtures with varying compressive strengths. The studies found that coconut fibre improved properties like tensile strength, toughness, crack resistance, and spalling resistance compared to plain concrete. Volume fractions of 2-5% and fibre lengths of 20-50mm produced the best results. The document concludes that using a 4-5% volume fraction of coconut fibres 30-40mm in length with M30-M60 grade concrete would provide benefits based on previous research.
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...IRJET Journal
The document discusses optimizing business management processes through automation using Microsoft Power Automate and artificial intelligence. It provides an overview of Power Automate's key components and features for automating workflows across various apps and services. The document then presents several scenarios applying automation solutions to common business processes like data entry, monitoring, HR, finance, customer support, and more. It estimates the potential time and cost savings from implementing automation for each scenario. Finally, the conclusion emphasizes the transformative impact of AI and automation tools on business processes and the need for ongoing optimization.
Multistoried and Multi Bay Steel Building Frame by using Seismic DesignIRJET Journal
The document describes the seismic design of a G+5 steel building frame located in Roorkee, India according to Indian codes IS 1893-2002 and IS 800. The frame was analyzed using the equivalent static load method and response spectrum method, and its response in terms of displacements and shear forces were compared. Based on the analysis, the frame was designed as a seismic-resistant steel structure according to IS 800:2007. The software STAAD Pro was used for the analysis and design.
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...IRJET Journal
This research paper explores using plastic waste as a sustainable and cost-effective construction material. The study focuses on manufacturing pavers and bricks using recycled plastic and partially replacing concrete with plastic alternatives. Initial results found that pavers and bricks made from recycled plastic demonstrate comparable strength and durability to traditional materials while providing environmental and cost benefits. Additionally, preliminary research indicates incorporating plastic waste as a partial concrete replacement significantly reduces construction costs without compromising structural integrity. The outcomes suggest adopting plastic waste in construction can address plastic pollution while optimizing costs, promoting more sustainable building practices.
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELgerogepatton
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.