This document provides an overview of gas detection and analysis solutions from a1-cbiss. It summarizes their portfolio including portable gas detectors, fixed gas monitoring systems, gas detection tubes, and more. It also outlines their services including consultancy, installation, commissioning, and ongoing support. The document highlights their expertise in key markets such as oil and gas, petrochemical, and other industries where gas detection is important for safety.
Lyssy l80 5000 Water Vapour Permeability TesterSystechIllinois
Easy and reliable testing for water vapour permeability. The L80-5000 is the latest generation of the proven L80 series, which has been used successfully for decades in many labs. With the L80-5000, the testing of water vapour permeability becomes very simple.
Cement plants require continuous monitoring of the process and product.
From incoming ore to blending the clinker not only is the product being analyzed (CaO, SiO2, Al2O3, etc) but a series of analyzers are monitoring the gases created throughout the process. Coal bins & mills, pre-heat towers, and calciners are monitored for CO and O2, the kiln is monitored for a series of gases (CO, NO, O2, CH4, CO2, SO2), baghouses are monitored for dust and particulate and the CEMs equipment monitors (flow, particulate, CO, NOx, SO2, O2, H2O, HCl, HF, VOC, … ) for compliance and as a last look at the process.
Whether it is the ore or clinker you're looking to analyze, the gases created in your kiln, the emissions out your stack or any of the places in-between, CEMSI provides full-site knowledge of cement production and wisdom in maximizing your product, safety, process and emission monitoring equipment and service.
The CEMSI cement solutions guide gives an overview of where you can expect our experts to help reduce capital and operating costs. CEM Specialties Inc (CEMSI) has supported cement for over 25 years with sales, service, parts, and expertise and has expanded our offerings to provide cement plants with better technology, increased up-time and confidence in their equipment.
Lyssy l80 5000 Water Vapour Permeability TesterSystechIllinois
Easy and reliable testing for water vapour permeability. The L80-5000 is the latest generation of the proven L80 series, which has been used successfully for decades in many labs. With the L80-5000, the testing of water vapour permeability becomes very simple.
Cement plants require continuous monitoring of the process and product.
From incoming ore to blending the clinker not only is the product being analyzed (CaO, SiO2, Al2O3, etc) but a series of analyzers are monitoring the gases created throughout the process. Coal bins & mills, pre-heat towers, and calciners are monitored for CO and O2, the kiln is monitored for a series of gases (CO, NO, O2, CH4, CO2, SO2), baghouses are monitored for dust and particulate and the CEMs equipment monitors (flow, particulate, CO, NOx, SO2, O2, H2O, HCl, HF, VOC, … ) for compliance and as a last look at the process.
Whether it is the ore or clinker you're looking to analyze, the gases created in your kiln, the emissions out your stack or any of the places in-between, CEMSI provides full-site knowledge of cement production and wisdom in maximizing your product, safety, process and emission monitoring equipment and service.
The CEMSI cement solutions guide gives an overview of where you can expect our experts to help reduce capital and operating costs. CEM Specialties Inc (CEMSI) has supported cement for over 25 years with sales, service, parts, and expertise and has expanded our offerings to provide cement plants with better technology, increased up-time and confidence in their equipment.
How to Maintain Your Temperature Calibration Equipment WebinarTranscat
In this informative webinar with Fluke Calibration you will learn tips for keeping your calibration baths and temperature calibrators operating at their peak.
You’ve invested a lot of money in your temperature calibration lab. Preventative maintenance is critical to keeping your calibration baths and temperature calibrators running at their best. A few minutes spent now in maintaining your equipment can also save you costly repairs and downtime later.
Field Pressure Calibration Tips Webinar with Fluke CalibrationTranscat
Please join Transcat and John Lopez from Fluke Calibration. We will discuss the best practices for field pressure calibration as well as the following:
---Pneumatic standards vs Hydraulic standards
---Device cleanliness and contamination
---Stability concerns
Claus Sulfur Recovery Tail Gas Applying 100 Million Hours of Operational Time...Ives Equipment
The measurement of H2S/SO2 in Claus sulfur recovery unit (SRU) tail gas has been adequately addressed by UV spectroscopy for over 40 years. Reliability of the analytical principle was established in the first generation of analyzers and in the second generation sample handling was improved to the point where automatic control if not universal is at least considered the norm. With a deep understanding of the process and a population of 1,100 second generation analyzers it was possible in the third generation to address failure modes external to the analyzer. Reliability is not limited to the analyzer / sample system; it extends to the process and contains elements of health and safety. Analyzer professionals are compelled to look beyond what we consider our "deliverables", to address abnormal operations and bad piping design. The paper combines extensive feedback from analyzer professionals and a survey of sulfur recovery operators to address the external failure modes. Looking back on 100 million hours of operational time and one year of field testing the third generation analyzer the paper discusses reliability as viewed by the real end use customer; Operations.
ENVEA designs and produces a complete range of state of the art CEMS gas and dust analyzers, sampling systems, data acquisition systems and software for the continuous measurement & reporting of stack pollutants.
With the global focus on emissions, the Group helps its clients quickly achieve environmental compliance in the most cost-effective manner.
Industrial emissions monitoring regulations vary from country to country, and the measurement technology must be assessed for suitability and in accordance with local requirements and standards.
Our solutions are fully compliant with the latest European and International regulations & standards.
The HY-OPTIMA™ 2700 explosion proof in-line hydrogen process sensors use a solid-state, non-consumable sensor that is configured to operate in process gas streams. The H2scan thin film technology provides a direct hydrogen measurement that is not cross sensitive to other gases.
The Claus process is the industry standard and so the most
significant gas desulfurizing process, recovering elemental sulfur
from gaseous hydrogen sulfide.
The process is commonly referred to as a sulfur recovery unit
(SRU) and is very widely used to produce sulfur from the
hydrogen sulfide found in raw natural gas and from the by-product
sour gases containing hydrogen sulfide derived from refining
petroleum crude oil and other industrial facilities.
There are many hundreds of Claus sulfur recovery units in
operation worldwide.
In fact, the vast majority of the 68,000,000 metric tons of sulfur
produced worldwide in one year is by-product sulfur from
petroleum refining and natural gas processing plants.
H2scan’s HY-OPTIMA™ Model 2700AS Process Hydrogen Analyzing System provides a complete solution for process hydrogen measurement in refineries, chemical plants, air separation units and industrial gas manufacturing plants.
The HY-OPTIMA™ 2700 explosion proof in-line hydrogen process sensors use a solid-state, non-consumable sensor that is configured to operate in process gas streams. The H2scan thin film technology provides a direct hydrogen measurement that is not cross sensitive to other gases.
H2scan’s HY-OPTIMA product line includes a range of real-time, in-line portable hydrogen monitors for process optimization in industrial applications. The end result is increased product yield, improved hydrogen utilization, and extended catalyst life.
Fluke Calibration on How to Calibrate an RTD Using a Dry block Calibrator Web...Transcat
What is covered:
1. Dry-block sources of error
2. Calculating uncertainties
3. How to calibrate probes with odd shapes and sizes
4. Temperature range concerns
5. Liquid-in-glass thermometers
6. RTD calibration example
7. Dry-block maintenance
Steer and/or sink the supertanker by Andrew RendellValtech UK
Andrew Rendell's (Principal Consultant from Valtech) presentation on: "Steer and or sink the supertanker"!
This presentation was held at the SPA conference on the 14th June 2011.
A case study into the pros and cons of over three years experience of continuous source code analysis followed by an interactive session using the real tool on real source code.
Andrew discusses what continuous inspection is and why directing software development can feel like trying to steer a super tanker.
How to Maintain Your Temperature Calibration Equipment WebinarTranscat
In this informative webinar with Fluke Calibration you will learn tips for keeping your calibration baths and temperature calibrators operating at their peak.
You’ve invested a lot of money in your temperature calibration lab. Preventative maintenance is critical to keeping your calibration baths and temperature calibrators running at their best. A few minutes spent now in maintaining your equipment can also save you costly repairs and downtime later.
Field Pressure Calibration Tips Webinar with Fluke CalibrationTranscat
Please join Transcat and John Lopez from Fluke Calibration. We will discuss the best practices for field pressure calibration as well as the following:
---Pneumatic standards vs Hydraulic standards
---Device cleanliness and contamination
---Stability concerns
Claus Sulfur Recovery Tail Gas Applying 100 Million Hours of Operational Time...Ives Equipment
The measurement of H2S/SO2 in Claus sulfur recovery unit (SRU) tail gas has been adequately addressed by UV spectroscopy for over 40 years. Reliability of the analytical principle was established in the first generation of analyzers and in the second generation sample handling was improved to the point where automatic control if not universal is at least considered the norm. With a deep understanding of the process and a population of 1,100 second generation analyzers it was possible in the third generation to address failure modes external to the analyzer. Reliability is not limited to the analyzer / sample system; it extends to the process and contains elements of health and safety. Analyzer professionals are compelled to look beyond what we consider our "deliverables", to address abnormal operations and bad piping design. The paper combines extensive feedback from analyzer professionals and a survey of sulfur recovery operators to address the external failure modes. Looking back on 100 million hours of operational time and one year of field testing the third generation analyzer the paper discusses reliability as viewed by the real end use customer; Operations.
ENVEA designs and produces a complete range of state of the art CEMS gas and dust analyzers, sampling systems, data acquisition systems and software for the continuous measurement & reporting of stack pollutants.
With the global focus on emissions, the Group helps its clients quickly achieve environmental compliance in the most cost-effective manner.
Industrial emissions monitoring regulations vary from country to country, and the measurement technology must be assessed for suitability and in accordance with local requirements and standards.
Our solutions are fully compliant with the latest European and International regulations & standards.
The HY-OPTIMA™ 2700 explosion proof in-line hydrogen process sensors use a solid-state, non-consumable sensor that is configured to operate in process gas streams. The H2scan thin film technology provides a direct hydrogen measurement that is not cross sensitive to other gases.
The Claus process is the industry standard and so the most
significant gas desulfurizing process, recovering elemental sulfur
from gaseous hydrogen sulfide.
The process is commonly referred to as a sulfur recovery unit
(SRU) and is very widely used to produce sulfur from the
hydrogen sulfide found in raw natural gas and from the by-product
sour gases containing hydrogen sulfide derived from refining
petroleum crude oil and other industrial facilities.
There are many hundreds of Claus sulfur recovery units in
operation worldwide.
In fact, the vast majority of the 68,000,000 metric tons of sulfur
produced worldwide in one year is by-product sulfur from
petroleum refining and natural gas processing plants.
H2scan’s HY-OPTIMA™ Model 2700AS Process Hydrogen Analyzing System provides a complete solution for process hydrogen measurement in refineries, chemical plants, air separation units and industrial gas manufacturing plants.
The HY-OPTIMA™ 2700 explosion proof in-line hydrogen process sensors use a solid-state, non-consumable sensor that is configured to operate in process gas streams. The H2scan thin film technology provides a direct hydrogen measurement that is not cross sensitive to other gases.
H2scan’s HY-OPTIMA product line includes a range of real-time, in-line portable hydrogen monitors for process optimization in industrial applications. The end result is increased product yield, improved hydrogen utilization, and extended catalyst life.
Fluke Calibration on How to Calibrate an RTD Using a Dry block Calibrator Web...Transcat
What is covered:
1. Dry-block sources of error
2. Calculating uncertainties
3. How to calibrate probes with odd shapes and sizes
4. Temperature range concerns
5. Liquid-in-glass thermometers
6. RTD calibration example
7. Dry-block maintenance
Steer and/or sink the supertanker by Andrew RendellValtech UK
Andrew Rendell's (Principal Consultant from Valtech) presentation on: "Steer and or sink the supertanker"!
This presentation was held at the SPA conference on the 14th June 2011.
A case study into the pros and cons of over three years experience of continuous source code analysis followed by an interactive session using the real tool on real source code.
Andrew discusses what continuous inspection is and why directing software development can feel like trying to steer a super tanker.
With the bulk of operations moved from ship to shore, shore side has the onus to support and respond in real-time to its fleets even as they spread out across different parts of the ocean. To bridge ship to shore communication sand to enable shore side to quickly be on top and take charge of any situation, ICT solutions providing swift monitoring and control capabilities become key.
DOES16 London - Jonathan Smart - From Oil Tankers to SpeedboatsGene Kim
From Oil Tankers to Speedboats
Jonathan Smart, Head of Development Services, Barclays
In this talk, Jon will share the story of how Barclays, a 325 year old organisation in a heavily regulated industry, with breadth, diversity and complexity, is adopting Agile and DevOps at scale (130,000 employees in 50 countries) and at pace. Jon will share lessons from the organisational-wide transformation so far.
- How to go from oil tankers to speedboats at scale
- How to have agility, innovation and compliance to controls
- What are Agility Levels and how do they help?
- Why a holistic approach is important
IndexTank is a great search indexing service, this gem tries to make that any orm stays in sync with IndexTank easily. It has a simple yet powerful approach to integrate IndexTank with any ORM
Intrinsically Safe ATEX, unsurpassed certified oxygen analyser for all hazardous areas. The EC91 Process Oxygen Transmitter will detect levels of oxygen as low as 1ppm, up to higher percent levels and can be used on most industrial gases and atmospheres.
Accurate, reliable and flexible process gas and moisture analysis solutions for industry. Oxygen analysers, Moisture analysers,
Binary gas analysers & ATEX Approved analysers
Learn about a1-cbiss' refrigeration solutions that cover everything from refrigerant leak detection and monitoring through to emissions control in this brochure
Debris / Junk Catcher Manifold is designed to remove drilling, formation and proppant based debris / junk from the wellbore fluids to minimize the potential damage.
MTC Well Test Equipment - Worldwide Oilfield Machinewomgroup
WOM's Magnum Technology Center’s (MTC) Trailer-Mounted Test Package offers a completely configurable design on a compact and trailer system which contains both testing equipment and operating facilities.
We specialise in Bioaerosols, Sick Building Syndrome, Fenceline Monitoring, Urban air quality, Industrial air quality, construction air quality, CEMS, CAMS and much more.
Testo – The Strong Partner for Facility Managers.Lothar Zorn
Your advantages with Testo
Operating costs, user convenience, energy consumption: as a facility manager, you need to keep an eye on a number of things. So it is good to have a strong partner who supplies integrated solutions for your building management requirements.
You can find these solutions at Testo. Because the hightech company from the Black Forest has stood for precision measuring technology with innovative operability for 60 years. Measuring instruments from Testo are in use everywhere where it is important to save time and resources and to protect the environment and human health.
Whether it involves heating, HVAC, air conditioning, ventilation and refrigeration systems or electrical installations: you get measuring solutions for all building systems from a single source at Testo. Testo’s measuring instruments enable faster testing, more convenient maintenance and more efficient setting of systems. In addition, you ensure the thermal comfort level in indoor areas and early detection of mould, humidity, damage to buildings and energy losses thanks to thermography.
The range Testo offers is completed by a wide variety of services which make your work easier. From individual advice, along with repair and spare part services, via seminars and training, through to professional test equipment management – Testo is your strong partner for measuring solutions and services in facility management
CATALOGO SKC para identificación flujos de aire y bombasEcosheConsultores
catalogo SKC para identificar materiales y tipo de filtros, así como tipos de bombas usadas en el monitores de agentes contaminantes en el ambiente laboral de cualquier centro de trabajo donde usas sustancias químicas peligrosas en diferentes formas, el uso, manejo y almacenamiento, así mismo, puede encontrar información relevante para identificar flujos y patrones de flujo para dicho monitoreo, tambien el medio de filtración mas adecuado para capturar la sustancia quimica a la que se expone el personal ocupacional mente expuesto en su centro de trabajo y área donde labora dentro de su empresa, tambien define tiempos de monitoreo para estas sustancias.
As an industry leader in industrial hose, ERIKS can meet every hose requirement you may have.
Rubber hose, plastic hose, metallic hose, PTFE hose, Silicone hose, composite hose
Ideal for oil exploration and extraction the MSA Ultrasonic Gas Detector offers a wide range of detection information. Find out more in this datasheet prepared by gas detection specialists a1-cbiss.
In the Adani-Hindenburg case, what is SEBI investigating.pptxAdani case
Adani SEBI investigation revealed that the latter had sought information from five foreign jurisdictions concerning the holdings of the firm’s foreign portfolio investors (FPIs) in relation to the alleged violations of the MPS Regulations. Nevertheless, the economic interest of the twelve FPIs based in tax haven jurisdictions still needs to be determined. The Adani Group firms classed these FPIs as public shareholders. According to Hindenburg, FPIs were used to get around regulatory standards.
buy old yahoo accounts buy yahoo accountsSusan Laney
As a business owner, I understand the importance of having a strong online presence and leveraging various digital platforms to reach and engage with your target audience. One often overlooked yet highly valuable asset in this regard is the humble Yahoo account. While many may perceive Yahoo as a relic of the past, the truth is that these accounts still hold immense potential for businesses of all sizes.
Recruiting in the Digital Age: A Social Media MasterclassLuanWise
In this masterclass, presented at the Global HR Summit on 5th June 2024, Luan Wise explored the essential features of social media platforms that support talent acquisition, including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok.
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
An introduction to the cryptocurrency investment platform Binance Savings.Any kyc Account
Learn how to use Binance Savings to expand your bitcoin holdings. Discover how to maximize your earnings on one of the most reliable cryptocurrency exchange platforms, as well as how to earn interest on your cryptocurrency holdings and the various savings choices available.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
1. Gas Detection & Analysis
Gastec Detector Tube System
Portable Gas Detectors
Fixed Gas Monitoring Systems
Service & Support
GAS DETECTION & ANALYSIS
2. COMPANY OVERVIEW
a1-cbiss have over 20 years experience and capability providing gas detection solutions across a wide range
of industries for the protection of people, facilities and the environment.
We pride ourselves on placing great emphasis on customer service to qualify your need and offer a gas
detection solution that best suits your requirement.
We can offer personal gas detectors through to gas detection systems that are integrated into a complete
control system.
Working with a1-cbiss
Project Management
Expertise &
Consultancy
n Every project is
fully supported by
a dedicated project
manager to provide
one point of contact
throughout every phase
through to completion
and thereafter
2
n Market leading technical
legislative
consultancy
1
In-House Project
Design Build
COMPLETE
TURNKEY SOLUTION
Service Support
All equipment is fully
supported in the UK
by industry specialist
engineers to provide the
most comprehensive
maintenance programme
available.
n Expert installation
team with over 10
years experience to
install, calibrate and
commission your
system
n 24 Hour callout
response
n Peace of mind
n Bespoke contracts
tailored to site specific,
legislative or budgetary
requirements
1
n Consultation
troubleshooting to
meet specific design/
application requirements
Installation
Commissioning
n Nationwide coverage
5
www.a1-cbiss.com +44 (0)151 666 8300
n Expert in-house design
team provides initial
drawings following full
site survey
n All systems are
configured to specified
requirements by factory
trained engineers
3
4
View
ies
our Case Stud om to
s.c
www.a1-cbis ples
see exam
of our work
company/a1-cbiss
a1cbiss
3. KEY MARKETS
Oil Gas
Petrochemical
Water/Wastewater
Food and Beverage
Shipping and Marine
Environmental
Labs and Universities
www.a1-cbiss.com +44 (0)151 666 8300
Construction
company/a1-cbiss
a1cbiss
2
4. GASTEC Detector Tube System
Sign up for rs
ffe
our latest o s.com
s
www.a1-cbi
Delivered to your door for
tomorrow anywhere in the UK
Gastec Gas Tubes
Gastec tubes are used as an on the spot sampling
method for measuring toxic substances in air or water.
Gastec tubes are used as a cost-effective, short-term or
long-term gas detection method.
Benefits of buying from a1-cbiss:
3 Same day despatch for orders placed before 2pm
3 All packs of standard tubes, same price - £29.95
3 Helpful service and support
3 The most accurate detector tube system available
3 The Gastec tubes give a clear and precise, easy to read colour
Gastec detector tubes are used worldwide in:
n Factories
n Chemical plants
n Oil and gas platforms
n And other work places where gas detection is required
Whether you are in occupational hygiene, environmental
analysis or COSHH assessment, Gastec has the answer!
change
3 Easy to use sample pump which requires minimal pump strokes
3 Pump adapter to provide convenient, one handed
operation
Application Note – Crude Oil Tank Cleaning
Tanks onboard vessels must be cleaned from time to time for
various reasons. One reason is to change the type of product
carried inside a tank. Protocols for entry into confined space are
required as there is a risk of the presence of toxic gases such
as Benzene, H2S, Mercaptans , Hydrocarbons, etc. Referrals
should be made to the MSDS (Marine Safety Data Sheets) and
precautions for toxic gases as listed in ISGOTT.
Entry should not be permitted without
appropriate personal protective
equipment if statutory or recommended
exposure limits are likely to be exceeded.
Checks for toxic gases should be made
prior to entering a tank using appropriate
detector equipment, such as detector
tubes.
3
www.a1-cbiss.com +44 (0)151 666 8300
Follow us
on Twitter
Linkedin
company/a1-cbiss
a1cbiss
5. The Gastec detector tube system comprises two major components; the piston-style pump, which utilises an easy draw
and the Gastec detector tubes, which give a precise and easy to read colour change.
Gastec Precision Pump
The Gastec Sampling Pump offers superior benefits over
other tube sampling techniques.
n Easy use and minimal effort often using single pump strokes
Gastec Kits
The a1-cbiss industry specific starter kits are ideal for
newcomers to gas detection or for specific air monitoring
applications.
n Complete with a tube tip breaker
Each kit contains components for routine gas detection
n Flow finish indicator to show when pump stroke is complete
n Gastec pump
n Optional sample counter
n Application specific Gastec detector tubes
Standard Gas Detector Tubes
Short term measurement and low level detection of over
600 different gases and vapours
Dosi-tubes
Long term measurement of gas concentrations for
personnel exposure and area monitoring
Polytec Qualitative Tubes
Qualitative Detector tubes for the determination of unknown
gases and vapours
Ion Tubes
Low level measurement of contaminants in water
n Guidance notes training guide
n Maintenance kit
n Carry Case
Got a q
about dete uestion
See Our FActor tubes?
www.a1-cbQ section
iss.com
Our Most Popular Kits include:
n Starter Kit Plus Kit
n Confined Space Entry Kit
n COSHH Assessment Kit
n Toxic Gas Detection Kit
n Unknown Gas Hazard Assessment Kit
Airtec Tubes
Air quality testing in breathing air-lines and
air-fed machinery
View our d
an
case studiesonline
testimonials s.com
www.a1-cbis
Starter Kit
Confined Space Kit
www.a1-cbiss.com +44 (0)151 666 8300
COSHH Assessment Kit
company/a1-cbiss
Unknown Gas Hazard Kit
a1cbiss
4
6. Breathing Air Quality Test Kit
AIRQUAL-1 Compressed Air Testing Kit
Designed to fully comply with EN12021 for the air purity testing of compressed breathing air.
It is a conveniently packaged breathing air quality test kit that allows for a convenient ‘on the spot’
measurement of compressed air.
Kit Includes:
Breathing Air Test Kit Measures:
Features:
n Robust aluminium case
n Oxygen levels
n Ensures full compliance with EN12021
n 1/4” Female BSP connection
n CO
n Fast, low cost testing
n Stopwatch
n CO2
n Tube breaker
n Water Vapour
n Rugged design - Housed in a protective aluminium
casing
n 4 packs of Airtec tubes
n Oil Mist
n O2 Gas detector
n Lightweight – Only 4kg
n No additional equipment required
n On-site customer calibration function
n No batteries required
n No charging required, meaning that it can even be used
in situations where power isn’t accessible
Ideal for testing:
n Breathing Air Compressors
n S.C.U.B.A
n Breathing Air Masks
n Process Air Compressors
Application Note – Compressed Air Testing
Compressed breathing air is used in paint booths in autobody shops, spray booths, silica blasting and similar applications. Also
compressors are used to fill scuba tanks or provide air to divers. It is very important that the quality of the air provided to the worker
or diver meet the requirements and guidelines laid out in EN12021 for compressed breathing air.
A1-cbiss have designed a conveniently packaged breathing air quality test kit – the AIRQUAL-1, that allows for an ‘on the spot’
measurement of compressed air that fully complies with the compressed breathing air standards.
5
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
7. Recognise these headaches?
‘We cannot maintain our equipment.’
‘Gas Detection costs are too high and unpredictable.’
‘We don’t really know what’s happening out there.’
Sound familiar? Then INET could be for you.
1
2
5
3
4
1. Operators dock gas detectors
2. Docking Stations perform
bump tests, calibrations and record-keeping
3. iNet Control provides visibility into your gas detection program via the Web
4. iNet e-mails real-time alerts and status reports
5. When iNet detects a problem, Industrial Scientific rushes a replacement gas detector to you
Finding the right gas detector is easy. The hard part is deciding how to solve common gas detection problems.
What do you do when your people are exposed to alarm conditions?
What do you do when gas detectors go down and you’re waiting for them to be serviced?
iNet keeps people safe by providing visibility into alarms, exposure and usage. It manages costly and timeconsuming maintenance problems before they happen. And you don’t have to buy the gas detectors when you
subscribe to iNet.
Instead, you receive Gas Detection as a Service.
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
6
8. Portable Gas Detectors
Concentrations of H2S over 1000ppm, cause immediate collapse and
loss of breathing”
Wearing a personal gas detector, may save your life!
Single Gas Detectors
4 Gas Detectors
Industrial Scientific Tango TX1
MSA Altair 4X
n New Dual Sensor Technology
n 3 year warranty
n Sensors from CO, H2S, NO2, SO2
n EL, CO, H2S O2
L
n 3 Year Warranty
n 1m water submersible
n IP66, IP67
n 6m drop test
Industrial Scientific Ventis MX4
n Draws samples of up to 100 feet with an
optional, integrated sampling pump
n 4 gases from O2, CO, H2S, NO2, SO2, CH4
n Available for hire
Tell us your
detection proble
Connect with u ms
s–
LinkedIn
7
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
9. Multi-gas Detectors
MSA Altair 5X
n Measures up to 6 gases simultaneously
n A field-proven integral pump provides consistent gas flow without the problems of externally
attached components
n Fitted with a wide range of toxic, LEL and infra-red sensors, providing the flexibility required to meet
most applications
Industrial Scientific MX6 iBrid™
n Features a full-colour LCD display screen
n Designed to detect 1 to 6 gases including oxygen, combustible gases and
up to four toxic gases
n Available for hire
Application Note – Confined Space Entry
Confined space refers to an area which is enclosed with limited access
which making it dangerous. An example is the interior of a storage tank,
which workers may enter for maintenance but which is not ordinarily a
habitable space. Hazards in a confined space often include suffocation by
gases which may be present but not identified by visibility or smell.
In September 2012, three men died suffering from the effects of fume
inhalation after falling into a slurry tank on a farm at Hillsborough, County
Down, Ireland.
Had they been wearing a personal gas detector to detect present gases,
an alarm would have given them an indication that the tank was not safe to
enter and death would have been prevented.
Area Monitoring
BM25 Transportable Area Monitor
n onitoring from 1 to 5 gases through diffusion or sample draw
M
n esigned for team protection or area surveillance
D
n 7 interchangeable “smart” sensor options
1
n untime greater than 100 hours
R
n vailable for hire
A
Application Note – Hot Works Maintenance
Within ATEX areas it is sometimes necessary that hot works i.e. welding
is required especially during shut downs. Due to its nature, welding is an
ignition source and in normal operation would not be allowed within an
ATEX area. Even though during shut downs great care is taken to ensure
that no explosive gases are present, it is still necessary to monitor for any
unexpected gas clouds.
A typical use for the BM25 would at a gas custody transfer station where
natural gas releases are possible especially during plant scheduled
maintenance.
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
8
10. Photo Ionisation Detectors
ToxiRAE Pro PID
The world’s smallest wireless volatile organic
compounds (VOC) monitor
n he ToxiRAE Pro PID provides safety professionals with wireless
T
access to real-time instrument readings and alarm status from any
location for better visibility and faster response
Advanced handheld Photo Ionisation Detectors
(PID) are ideal instruments for detecting volatile
organic compound (VOC).
n romptly detects and accurately monitors over 300 VOCs
P
n ire and HazMat
F
n eliable, rugged, and intrinsically safe
R
n Industrial Hygiene
n Continuous datalogging
n .1 to 2,000 ppm range, 0.1 ppm resolution and 190 built-in
0
correction factors
n Environmental Applications
n National Security
MiniRAE 3000
Portable Handheld VOC Monitor
n ID range of 0 to 15,000 ppm
P
n ATEX Approved
ToxiRAE
Pro PID
MiniRAE Lite
The most reliable handheld
(VOC) monitor on the market
n PID range of 0 to 5,000 ppm
n ATEX Approved
ppbRAE 3000
Portable Handheld VOC Monitor
Application Note – Land remediation
n PID range of 1 ppb to 10,000 ppm
n ATEX Approved
MiniRAE
3000
Contaminated land is a struggle for developers looking
to build new property. Land contamination simply means
an unacceptable risk to human health or the environment.
Identifying land contamination requires assessment,
measurement and remediation. The primary contaminants
are typically VOC’s (volatile organic compounds).
MiniRAE3000 VOC monitor ensures costs are kept to a
minimum whilst providing environmental consultants with
accurate results to decide what level of remediation is
required.
9
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
11. Colorimetric Gas Detectors
DOD Technologies employ reliable ChemLogic tape technology to provide quick detection of low level gases at ppb levels,
whilst utilising the most advanced electronics and analysis software to meet the needs of health and safety professionals.
The ChemLogic Continuous Gas Monitor provides field proven
ChemLogic Technology to detect Hydrides and Diisocyanates.
n Reduced maintenance
n Quick response times
n 2 4 Month cassettes for reduced operation cost
n Flash memory storage for easily retrievable data
Application Note – Testing for Isocyanates
Chemical plants require area samples or spot checks to be collected at key
locations along production lines to evaluate the risk of isocyanate exposure to
personnel.
Disinfectants such as hydrogen peroxide, peracetic acid, and ozone, as well
as refrigerants like ammonia are frequently used. Long-term exposure to these
toxic gases may cause serious health effects such as breathing difficulties, eye
irritation and skin corrosion. As a result, gas detection is an important part of
the everyday safety requirements for these processing facilities to ensure a safe
work environment.
The Next Generation ChemLogic Portable (CLPX) provides powerful
portable gas detection to detect a variety of gases. Its design makes the
versatile CLPX the most reliable, fool proof, user friendly gas detector on the
market.
n Changing the instrument from detecting one gas to another simply requires a change of
the calibration curve and a change of the cassette
n Immediate indication that gas is present
n Automated calibration reduces maintenance
n Built in data logging micro SD card can record up to 5 years of data
n Up to 12 hours of continuous monitoring
Personal Badges
The SafeAir system consists of a direct reading colorimetric badge and a colour
comparison chart
n Personnel or area monitoring for exposure times ranging from 15 minutes to 24 hours
n Easy to use
n Highly sensitive and selective
n Ideal for daily employee screening or leak detection due to small size fast response time
n No calibration or laboratory analysis needed
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
10
12. Odour Monitoring
on,
ess Opti field
Wirel ess to
c
easy ac ,reducing
data costs
travel
The OdaLog is available in 3 options:
Wireless OdaLog RTx Logger
n ong life lithium battery lasts greater than 12 months, allowing for long term
L
deployment in wastewater treatments and perimiter monitoring applications
n perates at ranges of 0-200ppm or 0-1000ppm
O
n emory capacity stores up to 42000 data points
M
n asy to read instruction menu
E
n arge LCD
L
L2 OdaLog Logger
Purpose built, robust design with superior
features
n ATEX approvals
n Stores up to 42000 data points
n Single button operation easy to read menu
n Monitoring of H2S, Cl2, NO2, SO2, NO, CO or NH3
at ppm levels
App-Tek OdaLog Low Range H2S Logger
Designed to assist in odour control management
n Accurately monitors H2S at levels of 0.01 to 2ppm
n It is designed to assist in odour management activities at: plant
fence-lines, scrubber outlets, landfill sites and residential locations
where complaints are frequently reported
OdaStat Software takes gas data from the
OdaLog instrument and in a few simple steps
creates vital information, providing the user
with a clear understanding of gas levels and
patterns in graphical and tabular form.
Application Note – Wastewater treatment plants
When transporting and treating wastewater, the breakdown of organic matter within sewage releases Hydrogen Sulphide (H2S),
which causes a number of environmental issues odour complaints from local residents.
To help control the levels of H2S cultivation, odour control chemicals are added to the sewage. The Odalog is used to monitor the
H2S levels within the pipelines and the effectiveness of chemical dosing. Odalogs are used by 80% of wastewater companies across
the UK, they are chosen because of their superior IP rating and excellent battery life and data capacity.
11
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
13. Fixed Gas Detection Systems
ChemDAQ’s Steri-Trac Gas Monitoring System provides the optimal solution for workplace safety assurance, utilising
configurable alarms and a module design for continuous detection.
The steri-trac detectors are configurable to support 28 different gases including Peracetic Acid, Ethylene Oxide, Hydrogen
Peroxide and Ozone, with each individual detector showing the readings for its dedicated area.
Reliable Means of Employee Protection
The use of an ethylene oxide filter eliminates any false alarms
from common background interference such as alcohols and
carbon monoxide.
Reduce Downtime with Sensor Exchange Program (SXP)
The use of ChemDAQ’s SXP utilises exchangeable EnviroCell™
Sensor Modules for reliable and accurate gas readings. The program
provides factory calibrated sensors at regular intervals, ensuring your
unit is always working at is best.
DAQ Central Monitoring System
ChemDAQ’s DAQ Central Monitoring System is a PC based data
acquisition program designed to provide real time tracking and
display of TWA.
Application Note – Food and Beverage Facilities
The food and beverage industry works to ensure that food stuffs are preserved properly for shipment, providing consumers with
an ongoing supply of processed food, rich in taste and colour, and free of bacteria.
Disinfectants such as hydrogen peroxide, peracetic acid, and ozone, as well as refrigerants like ammonia are frequently used.
As a result, gas detection is an important part of the everyday safety requirements for these processing facilities to ensure a safe
work environment.
ChemDAQ’s Steri-Trac® toxic gas monitoring system provides a means to monitor ambient air in the work place and help ensure
a safe environment. Steri-Trac® Area monitors, in conjunction with Remote Display Repeaters and ChemDAQ’s DAQ™ Central
Monitoring System continuously gather, analyse, report and display exposure values in areas where dangerous agents are used
or stored.
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
12
14. Fixed Gas Detection Equipment
Application Note – Oxygen Depletion
When inert gas is allowed to escape into atmosphere, the oxygen level becomes depleted. Gas alarms are
triggered when the levels of oxygen measured reach set alarm levels. Oxygen levels are continually measured
by fixed gas detectors positioned around the risk area, which provide the central control system with
continuous readings. Alarm levels are set so that indication can be provided to key personnel via the control
panel of a potentially unsafe situation, coupled with alarms/beacons which are usually provided to ensure all
risk areas are covered with a clear signal to personnel.
In many industrial applications, safety is ensured around the clock by a fixed gas
detection system. Hazards can have several origins: the release of toxic gases, oxygen
deficiency or enrichment as well as the presence of combustible gases and vapours.
With most systems having 4-20mA, digital, or relay outputs, a signal can be used to trigger industrial processes if a
situation becomes dangerous. For example starting extractor fans or turning off supply lines. When detected at an early
stage, counter-measures can be initiated to protect personnel, workplaces and plant.
a1-cbiss offer a range of control panels and detectors from the market’s leading manufacturers.
MX15
n 1 channel
n Low cost and easy to install
n DIN rail mounting
n 3 built-in discrete relays
n For any transmitters/detectors
n Continuous self-checking
MX43
n Analogue and digital controller
n emoted modules (cost savings on wiring
R
installation)
n 4 or 8 lines, up to 32 detectors
n Up to 32 fully programmable relays (OR, AND,
NAND, NOR, Voting functions)
n Large graphic display
n Data logging capability
n S485 Modbus RTU and multiple
R
analogue outputs
i-TransTM
n nique dual sensor Platform (remote placement)
U
n -20 mA and ModBus RTU interface for direct communication to any control device or PLC
4
n ptional built-in relays
O
n ighly visible, split-screen LED display
H
n etects O2, combustible and toxic gases
D
n vailable in stainless steel
A
13
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
15. OLCT10 - OLC10
n 4-20 mA output analog transmitter without display
n Available with catalytic bead, electrochemical or semi-conductor sensors
n Detects combustible, toxic and refrigerant gases (CO, NO, NO2, Methane, Propane, Butane, Hydrogen,
LPG, NGV and freons) - EN 14624 compliant with regards to R134a monitoring
n For commercial use (boiler rooms, hospitals, carparks, etc.)
n ATEX 3G certified for use in zone 2 (except semi-conductor version)
OLCT10N
n igital transmitter without display
D
n vailable with catalytic bead or electrochemical sensors
A
n etects O2, combustible, and toxic gases
D
n vailable for detection of O2, CO, H2S, NH3, NO, NO2, Methane, Propane, Butane and Hydrogen
A
n or commercial and light industrial applications (laboratories, cooling rooms, hospitals, boiler
F
rooms, waste water treatment plants, etc.)
n TEX 3G certified for use in zone 2
A
n or use only with the MX43 controller
F
OLCT 60/OLCT IR
n 4-20 mA analogue infrared transmitter with display
n Corrosion resistant
n SIL2 capability
n Available with remote sensor head
n Detects CO2 or combustible gases
n Heated optics
n Double source / four beams
n Non-intrusive, one-man
calibration
Oldham CTX300
n -20 mA analogue transmitter without display
4
n IL2 capability for LEL, O2, CO, H2S, NH3, CO2
S
n etects combustible, toxic or refrigerant gases and O2
D
n vailable with electrochemical, infrared or semi-conductor sensors
A
n esigned for industrial applications
D
n vailable in explosion-proof or intrinsically safe versions, and stainless steel
A
n ew XP IR infrared sensor or catalytic sensor
N
n high-temperature version allows operation up to 200°C
A
OLC 100/OLCT 100
n 4-20 mA analogue transmitter without display
n Designed for industrial applications
n SIL2 capability for LEL, O2, CO, H2S, NH3, CO2
n vailable in explosion-proof or intrinsically safe
A
versions, and stainless steel
n Detects combustible, toxic or refrigerant gases
and O2
n Available with electrochemical, infrared or semi
conductor sensors
n New XP IR infrared sensor or catalytic sensor
n high-temperature version
A
allows operation up to 200°C
OLCT80/OLCT80 Wireless
n triple head multi-function transmitter
A
n n-board display
O
n built-in relays for fault, low and high alarms (alarms in relay are fully programmable)
3
n wo 4-20 mA inputs, built in relays, memory settings and requests by remote control
T
n -20 mA and RS 485 outputs, loop connection
4
n ew Wireless Version available suitable for explosive areas
N
n lameproof or intrinsic-safety sensors
F
n ow power requirements;
L
n niversally accepted frequency of 2.4 GHz/900MHz;
U
and
n lexible input/output options, including analogue,
F
TOR and Modbus RS485
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
Visit
www.a1-cbis
s
to view the .com
full
range
a1cbiss
14
16. Ultrasonic Gas Leak Detection
The ultrasonic leak detector range boasts a variety of benefits including;
n Lifelong calibration
n SIL 2 and ATEX certified
n Self cleansing and self testing functions
n Can be remotely tested from up to 5m away
n Unaffected by wind direction, dilution of the gas and
direction of the gas cloud
n Microphone sensor technology
Application Note – Oil and Gas Platforms
Ultrasonic technology demonstrates significant benefits over infra-red or traditional point gas leak detection technologies as the
sensor itself is unaffected by wind direction, dilution of the gas cloud or the direction of the leak itself, therefore it has the potential to
provide early warning of a hydrocarbon release.
15
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
17. Genie Sample Conditioning Components
a1-cbiss is the UK distributor for A+ Corporation Genie Filters - the industry leader in providing sample
conditioning components to give you most accurate sample for reliable analysis in your oil gas pipeline process.
Genie membrane separators series 100 200
These separators contain Genie® Membrane Technology™ and are designed to provide
sample conditioning and analyser protection by:
n Removal of entrained liquid and fine particles from gas (vapour) streams. (100 Series)
n Removal of immiscible liquid such as water from liquid hydrocarbon sample streams such as gasoline and
diesel. (200 Series)
n Removal of absorbed gases, gas bubbles, or volatile organic carbon (VOC) compounds from water
samples (200 Series)
Genie probes
n Genie Probes contain Genie Membrane Technology on the probe tip which rejects entrained liquid at flowing pressure and
temperature conditions, making them suitable for extracting a representative (vapour phase only) spot, composite, or on-line gas
sample.
n A variety of portable and permanent models are available that range from 2” in length to those that are several feet long (designed
to install into an underground main line that cannot be depressurised) compounds from water samples (200 Series)
Genie pressure regulators
The Genie® Regulators™ are designed to help condition gas samples for analysis.
Our product offering includes single stage but also multi stage regulators in a heated
and non-heated versions.
n Minimises the chance of condensation thereby reducing regulator freeze-ups, pre serving sample
integrity, and minimising analyser down time and maintenance cost
n Eliminates the need for multiple regulators in series - reducing cost, space, and set up time
(JTR and JTR-H)
Avenger filters Series 30 90
These filters provide sample conditioning and analyser protection by:
n Coalescing and removal of liquid droplets, aerosol mist, and solid particles from gas
(vapour) streams
n Removal of sticky particles from liquid
Humidisorb, moisture corrosion
control
Humidisorb packets are designed to
protect moisture sensitive enclosures
and electrical/electronic equipment
by absorbing and releasing moisture
to maintain a long term, constant
relative humidity inside of the
enclosure.
www.a1-cbiss.com +44 (0)151 666 8300
Discussion
online – Sha
le Ga
LinkedIn s
company/a1-cbiss
a1cbiss
16
18. LumaSense Photoacoustic Gas Monitors
The LumaSense Photoacoustic Gas Monitors are highly accurate, reliable and stable
quantitative. Their measurement principle are based on the photoacoustic infrared detection
method. This means that they can speciate between almost any field gas that absorbs infrared light
at a very low detection limit (PPB range).
a1-cbiss supply them as standalone monitors or as part of a bespoke system.
Photoacoustic Gas Monitor INNOVA 1412
n Highly accurate, reliable and stable quantitative field gas monitor
n Selectively measures the concentration of up to 5 component gases and water vapor in any air sample
n Compensates for interference between the measured field gases, using the unique cross-compensation feature
n Detection limit is field gas-dependent but typically in the 10-2 ppm region
n Gases: CO2, CO, TOC, Water Vapour, SF6
Photoacoustic Multi-gas Monitor INNOVA 1314
n Can measure almost any gas which absorbs infra-red light
n Measures the concentration of up to 5 component gases and water vapor in any air sample
n Detection limit is gas-dependent, but is typically in the ppb region.
n Extremely reliable due to self-testing procedures
Sign up to
latest offe
Tweets/ma rs iler
Applications:
n Research
n Indoor air quality
n Occupational health safety
n Ventilation analysis
n Hospitals
n Agricultural production
n Exhaust emission monitoring
17
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
19. Bespoke Sampling Systems
a1-cbiss made their name within industry over 22 years ago by adding value to many gas detection instruments and
engineering them into sampling systems. We have a 4 man strong design team with another 6 engineers to design and
build bespoke systems to the customer requirements.
Many major projects include, The Natural History Museum, Tyco, Selex, Coors Brewery, E2V, Ricardo Engineering, Day
International.
It’s what we stand for! Custom Built Intelligent Sampling Systems.
The monitoring systems are suitable for a variety of applications including:
n Air Pollution
n OEM for Analyser Companies
n Confined Spaces
n Car Parks
n Refrigerant Plants
n Breweries
n Tunnels
n Landfill Sites
n Sewage Treatment Works
The next generation of a1-cbiss sequential gas
sampling systems provide multipoint, wide area
monitoring of up to 32 individual points. Every
project is fully supported by a dedicated project
manager to provide one point of contact through
to completion and thereafter.
CDAS (CBISS Data Acquisition Software) now
mcerted, completes the a1-cbiss sampling offering.
Software provision extends to site specific, legislative
and budgetary requirements.
Gases Analysed:
n CH4
n LEL
n CO
n NH3
n CO2
n NO
n H2S
n O2
n Hexane
n Propane
n HFC’s
Application Note – Tunnel Construction
During the construction phase of rail tunnels, a build-up of toxic
vapours, exhaust fumes given off by MEWP’s (mobile elevating
work platforms), or the build-up of potentially explosive gas, are the
main sources of hazardous gas which will risk worker safety.
As the application is classed as a confined space, the importance
of continuous gas detection is required to ensure workers safety.
As stipulated by the HSE and the BTS (British tunneling society),
they have specified monitoring of Oxygen (O2), Nitrogen Dioxide
(NO2), Carbon Monoxide (CO), and Nitrogen Oxide (NO), and to
include data logging and reporting software.
a1-cbiss supplied a gas detection system to continuously monitor
for all four gases and log their readings every 60 seconds. The PLC
controller and data logger operator is able to easily download the
data on a weekly basis via a USB key and download the data to
their laptop.
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
18
20. Service Support
SERVICE AND
SUPPORT
The Service Centre
SERVICE AND
SUPPORT
Whether it be single, multi, area or fixed gas detection, a1-cbiss Service Centre offers a full range of gas detection
services. The regional service support network consists of fully factory trained engineers and office based customer
service advisors who are there to help you and offer advice on any queries that you may have.
The Service Centre offer two forms of service capabilities – Return to Workshop or On-site Service.
n Large, regional service support network
n Fully factory trained industry specialists on hand to provide full service, repair calibration
n Competitive prices
n Fast turnaround times
n Stock holding of consumables and spare parts
n Dedicated customer service advisors
Return to Workshop
a1-cbiss provides a complete return to workshop solution for portables. Whether your equipment is damaged or simply in
need of a service or calibration, we offer competitive rates and 2 levels of response times. All instrumentation is issued with
the necessary calibration certficates in order for you to comply with your quality standards.
n 2 types of service package:
Standard – 7 day turnaround time*
Express – 3 day turnaround time *
* subject to parts availability
19
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
21. On-site Service – We come to you!
Service calibration is carried out on-site to reduce downtime, saving you money. It removes the complications of
shipping instrumentation off-site, eradicating the need for surplus equipment.
n 1-4 scheduled service and calibration visits per year
n Guaranteed response time from 48 hours
n Site allocated service engineer
n Comprehensive stockists of critical spare parts and consumables
Annual Service Contracts
Standard – 5 day response
Premium – 48 hour callout response
We specifically support products from the following manufacturers:
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
20
22. Service Support
Client Reference List
International Mining and Marine
Isotron
King Sturge
Rentokil Ltd
Michell Instruments
Dow Corning Ltd
Maersk Oil
Huntsman Tioxide
Ricardo UK
Shell UK
New Britain Oils
Vale Europe Ltd
Conoco Philips
Proctor Gamble
Cobra Hydro UK Ltd
BP Chemicals Ltd
Schlumberger Oilfield UK
BAE Systems
Bayer Crop Science UK Ltd
Scotts Company (UK) Ltd
Yara Industrial
BNFL PLC
Selex Sensors Airborne
Odournet UK
BP Shipping
SGS UK
Lucite International UK
Coors Brewers Ltd
University of Exeter
Bayer Crop Science
John Smiths
University of Manchester
Unilever UK
Continental Teves
University of York
Innospec Ltd
Costain Oil and Gas Process Ltd
Urenco Capenhurst Ltd
Odour Services International
Johnson Matthey PLC
Anglian Water
Novartis
Elster Instromet
H M Environmental
Thames Water
Scottish Agricultural College
Ineos Manufacturing Ltd
United Utilities
Glanbia Cheese
Total UK Ltd
DSTL
The Natural History Museum
Chubb Fire Scotland
Veolia ERF
GlaxoSmithKline
Loughborough University
Day International
Hawker Beechcraft
London Waste
Catalent
Stena Line
ExonMobil Chemical Ltd
Cory Environmental
21
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
23. Testimonials
“We have recently decided to change from drager tube analysis to Gastec.
The main drive for the change is the competitive price of the Gastec tubes and the next day delivery as standard.
In addition after a trial of the Gastec pump the user found it easier and quicker to use as most of the time the Gastec
pump requires only one pull against 10 strokes on the drager pump”.
Sandrine Colle
Team Leader Process Control Laboratory, Vale Europe Ltd
“a1-cbiss have supplied Ricardo UK with both fixed and portable gas detection. The service and support has been
good, quickly resolving any product issues that were no cause of their own. Overall I would happily contact them
again if and when we have another gas detection requirement”.
Alan Platt
Plant Maintenance Supervisor, Ricardo UK Ltd
Museum application note
The natural history museum’s newest exhibition, the giant squid, called Archie, is 8.62m long and was caught off the
coast of the Falkland Islands in March 2004. The final home for Archie is a specially made acrylic tank filled with a
10% solution of formol-saline as a preservative. The tank was constructed in California, by the people who made the
tanks for Damien Hirsts’ various artworks of animals in formaldehyde. The tank is 9m and 45cm long and stands on
a 1-metre stainless steel stand so that the giant squid can be viewed from any angle. The risk assessment indentified
the possibility of potential formaldehyde leakage, anything above 0.3ppm release to atmosphere is considered a risk
to health, therefore, low level gas detection was installed as a first point of detection for formaldehyde leakage.
a1-cbiss were chosen to supply the gas detection and sampling system. Due to the size of the area and the low
detection levels required, a1-cbiss engineered a solution that included two Innova 1412 Photoacoustic Gas Monitors
which detects formaldehyde down to 0.1ppm as well as their own Mark IV Samplers, which samples from over 70
locations across the museum.
a1-cbiss offers design, engineering, manufacturing, project management, installation and commissioning with all
major projects keeping quality control all in house to ensure trouble free project completion.
Shipping Vessels application note
To satisfy parts of ‘The Merchant Shipping and Fishing Vessels (Health and Safety at Work) (Chemical Agents)
Regulations 2010’, a1-cbiss were chosen by Stena Line to supply multi-gas detectors for each of their vessels.
The detectors had to monitor for CO, CO2, LEL, O2, H2S SO2. It was critical that the gas detectors were easy to
use, offered functions for datalogging recording and reporting software and were fully maintained via service, repair
and calibration.
Captain Andy Humphreys, Safety and Environmental Manager, Stena Line says
“Since the beginning of the project, we are very happy with the close contact support that we received from the sales
and service teams at a1-cbiss, which has ensured that we have bought the most cost effective and suitable solution
to meet the legislation and protect our employees. We chose to use a1-cbiss to service the gas detectors every 6
months as we have a very good relationship with the team there and they are always available to give me the expert
advice I require”.
www.a1-cbiss.com +44 (0)151 666 8300
company/a1-cbiss
a1cbiss
22
24. Contact Us:
Graham Burns
Gas Detection Sales Manager
Mobile: 07771 687 782
Email: graham.burns@a1-cbiss.com
Karl Roberts
Gas Detection Sales Engineer
Mobile: 07899 021 144
Email: karl.roberts@a1-cbiss.com
Tony Alker
Gas Detection Sales Engineer
Mobile: 07788 580 581
Email: tony.alker@a1-cbiss.com
GAS DETECTION ANALYSIS
Head Office:
11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral CH41 9HT
T: +44(0)151 666 8300 F: +44(0)151 666 8329 E: sales@a1-cbiss.com
W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com
Southern Service Office:
12 Finns Industrial Park, Mill Lane, Crondall, Farnham GU10 5RX
T: +44(0)1252 850 165
Scotland Service Office:
Riverside House, Riverside Drive, Aberdeen AB11 7LH
T: +44(0)1224 224 166