The document discusses refrigerant leak detection system solutions from a1-cbiss Ltd., including: - They provide design, manufacture, installation, and service for custom gas monitoring systems, with over 20 years of experience. - They offer various leak detection systems like the ARMS and RMS8000 for commercial refrigeration applications. - Client testimonials praise the systems' reliability, flexibility, easy operation, and excellent service support.

1. Refrigerant Leak Detection System Solutions

2. 1
Company Overview
We have over 20 years experience,
specialising in the design,
manufacture and installation
of custom built gas monitoring
systems.
All systems are supported
by our comprehensive
nationwide service
and support team.
Project Management:
• Every project is fully supported by a dedicated
project manager to provide one point of contact
throughout every phase through to completion
and thereafter
Design:
Service Support:
• In-house design team provides initial drawings
following full site survey
Service support is integral to the a1-cbiss offering.
With one of the largest service networks in the
industry and nationwide coverage, our dedicated
team of service engineers provide service, repair and
maintenance on all equipment supplied.
• Consultation troubleshooting to meet specific
design/application requirements
Build:
• All systems are configured to
specified requirements by
factory trained engineers
• Factory Acceptance Tests
(FAT’s) are conducted at our
in-house facilities with you
prior to installation, with all
relevant inspection certification
issued

3. 2
Reduce
Your Carbon
Footprint
Leak Detection Overview
There are different reasons why gas leak detection
is needed and an endless list of benefits from
having a solution in place. Here are some of the key
reasons:
• ompliance with relevant legislation - EN378
C
F-Gas
• aximise energy efficiency of refrigerant system.
M
15% gas loss = 100% increase in energy
consumption
• educed service costs (cost of replacement gas
R
and the service call)
• inimise risk of stock/product loss
M
• ersonnel and customer protection
P
• upports commitment to reducing carbon
S
footprint

4. 3
Applications including: Supermarkets • Refrigerated
Air Conditioning • Hotels • Marine • Food Manufact
ARMS
Currently operational on over 150 sites across Europe, the future-proof, legislation
driven, Automatic Refrigerant Monitoring System 2 (ARMS) is a proven fixed gas leak
detection system for commercial and industrial applications.
Benefits:
• Simultaneous multi-gas IR detection eradicates need for multiple systems and
supports site changes
• Unique detection of up to 32 individual points to enable accurate identification of
leak location
• Flexible system communication and intuitive touch screen user interface
• Bypass pump feature to minimise system
cycle time and response time
• Designed, manufactured and fully
supported in the UK
• Listed on the Energy Technology
List to benefit from 100% first year
Enhanced Capital Allowances
Gases:
• HFC/HCFC’s • CO2 • NH3
Hydrocarbons • CH4

5. 4
Storage/Distribution Centres • Chiller Plant Rooms
ture Processing
RMS8000
The a1-cbiss RMS8000 offers a robust, easy to use,
cost effective approach to providing an effective
refrigerant gas monitoring system. The RMS8000
is a wall mounted monitoring system used to
monitor concentrations of carbon dioxide, ammonia,
HCFC/ HFC or combustible gases in refrigerant
applications.
Benefits:
• Ideally suited to small/medium sized applications
requiring up to 8 points of detection
• Low cost solution for sites requiring minimal
number of monitoring points
• Compact design and easy to operate, reduced
installation and training
Inficon Handheld
Leak Detectors
The Inficon TEK-Mate D-TEK CO2
offer industry proven solutions for
handheld refrigerant leak detection.
Both detectors have developed a
strong reputation for high reliability
and sensitivity in the field.
• 4-digit, 7-segment display while another
2-character alphanumeric display indicates
instrument status
Benefits:
• Sensors operational from -18ºC to +60ºC allows
usage in a broad range of applications
• year warranty as standard, for increased peace
2
of mind
Gases:
• ighly sensitive with background zero function to
H
minimise false alarms
• HFC/HCFC’s • CO2 • NH3
• Hydrocarbons • CH4
• he D-TEK CO2 is the only handheld refrigerant
T
leak detector designed specifically for CO2
• uilt to last - Rugged design - Reduced
B
operational failures and cost of ownership
• he TEK-Mate offers patented heated diode
T
sensor technology
Gases:
• HFC/HCFC’s - TEK-Mate
• CO2 - D-TEK CO2

6. 5
Our Service Philosophy
Service support is integral to the a1-cbiss offering.
With one of the largest service networks in the
industry and nationwide coverage, our dedicated
team of service engineers provide service, repair
maintenance on all equipment supplied. With a
comprehensive service and support offering, there
are a number of options available to meet site
specific, legislative, or budgetary requirements. We
offer peace of mind that equipment is covered for all
eventualities, with service costs remaining fixed for
the contract period.
Typical Service Contract Comprises:
• 1 scheduled service and calibration visit per year
in compliance with F-Gas Regulation
• All labour and consumable parts inclusive
• Issue of full service documentation
• Standard 1 year warranty (option available to
extend warranty)
• Call-out response times tailored to meet specific
site requirements
• 24/7 regional service cover with locations in
Merseyside, Surrey and Glasgow
• Comprehensive stockists of critical spare parts
and consumables
• Fully factory trained and time served engineers
(with average length of service greater than 5
years)
The a1-cbiss philosophy dictates that quality should
continue far beyond the production phase
All systems are supported by our dedicated
service department to provide repair,
calibration, preventative maintenance,
software support and remote diagnostics.
All of our proposals offer tried and tested
technology with proven reliability. All systems
are fully supported in the UK by industry
specialist engineers, giving peace of mind
that your instrument is receiving the most
comprehensive maintenance programme
available.

7. 6
Client Testimonials
“
W
e are extremely pleased with the a1-cbiss gas leak detection system. It is both compact and
easy to install with a choice of 16, 24 or 32 sampling channels. It is extremely versatile with
its ability to sample two different gases simultaneously from one sensor, utilising a vast list of
refrigerant gas types. This makes it unique within its competition base.
The door mounted user screen is clear and easy to configure, with step-by-step instructions to
follow. Another unique feature of the a1-cbiss gas leak detection system is the ability to configure
each of the 16 volt-free relays to be triggered from any single or multiple sampling channels.
B
ut the great advantage this system has over all of its rivals is the ability to connect via a local
IP network to an RDM Data Manager (widely used world-wide for monitoring and controlling
refrigeration systems), giving the user/s the ability to configure it, monitor and report the
complete gas detection system from both the RDM Data Manager and remotely via the internet.
“
“
“
”
Colin Brown
Head of Controls, NCS (Cumbria) Ltd
T
he response and approach we have received from Karl and the team at a1-cbiss has
been extremely positive and showed real professionalism. As a result, we look forward to
strengthening our relationship in the months ahead.
Daniel Byrne
Active Control Engineer, Marks Spencer
O
aksmere has developed a strong relationship with a1-cbiss over recent years and worked
closely to provide a flexible, robust and extremely reliable refrigerant leak detection solution
for our mutual clients. The ARMS system offers flexibility in terms of multi-gas measurement
(Combined CO2 HFC’s or Hydrocarbons), integration with control/management systems and
this, combined with excellent system support, ensures that a1-cbiss can be trusted to deliver an
efficient/effective leak detection solution for their clients.
Gerrard Elliott
Electrical Design Engineer, Oaksmere
W
e have developed a strong rapport with Karl over the past 3 years to ensure a professional
relationship. I have found the a1-cbiss panel to be practical and easy to use thanks to onboard
software and the touch screen interface. The service back up team has been excellent and fully
supportive when servicing the refrigerant monitoring systems.
Bruce McIntosh
Director, Technical Retail Services Ltd
”
”
”

8. Contact Us:
Karl Roberts
Refrigerant Leak Detection Sales Manager
Mobile: 07899 021144
Email: karl.roberts@a1-cbiss.com
Office Details
a1-cbiss Ltd
11 Ark Royal Way
Lairdside Technology Park
Tranmere
Wirral
CH41 9HT
Tel: 0151 666 8300
Fax: 0151 666 8329
Buy online:
www.shop.a1-cbiss.com