The Graphite 52M is a heated FID volatile organic compounds analyzer that allows for continuous and accurate total VOC monitoring. It features a heated detector block up to 191°C that eliminates condensation and allows for measurement of heavy hydrocarbons. The compact device has a fast response time and is fully supported by certified data acquisition software. It is suitable for applications such as waste incineration monitoring in compliance with relevant standards and directives.

1. Environnement SA Graphite 52M
Heated FID Volatile Organic
Compounds Analyser
Datasheet
Equipped with one burner placed in a heated block, the Graphite
52M allows continuous and accurate Total VOC monitoring.
The FID is temperature controlled up to 191°C to eliminate
condensation. Extremely compact and with a very short response
time, this heated FID provides continuous monitoring of total VOC’s,
in compliance with the Waste Incineration Directive and EN12619
standard as written in most WID permits.
Features:
The Graphite 52M is fully supported by MCERTS
certified CDAS Elite Data Aquisition Software and
a comprehensive service and support package
• Detector placed in a heated oven, up to 191°C allowing
measurement of high concentrations of heavy hydrocarbons
• Fast response time
• Real time graphic display with interactive menu driven software
• Integrated zero air catalyst
• Dual stream monitoring by independent detectors available
• User selectable ranging
• Very low limits of detection
• Hydrogen/Helium fuel supply thus reducing oxygen interference
• Fully compatible with the
Environnement S.A. MIR-FT & MIR-9000 CEM systems
• MCERTS Certified
Specification
Applications:
• Waste Incinerators
• Thermal Oxidisers
• Exhaust Gas Analysis
• Standard Reference Method for VOC Monitoring
• Laboratories and Research Centres
• Process Control
• Combustion Monitoring
MCERTS Certification Range:
TOC: 0-15mg/m3
026
Certificate Number 996/96
Specification:
• Ranges: 0-10/100/1000/10000 ppm or user programmable
range up to 50 000 ppm
• Accuracy: < 1% of the displayed value between 15% and
100% of the F.S.
• Lower detectable limit: 0.05 ppm of the 10 ppm range
• Response time: < 1 sec. (T90)
• Zero drift: <1%/24h F.S. <2%/7 days F.S.
• Span drift: <1% / 7 days F.S.
• Linearity: <1% for concentration between 10 % and 90% of
the scale
• Temperature of the heated block: up to 191°C
• Sample flow rate: 0.7 to 2 l/min
• Dimensions: 483 x 470 x 177mm (WxDxH)
• Weight: 22kg approximately
• Power supply: 230 VAC, 50Hz or 115 VAC, 60 Hz
• Power consumption: 500VA during start up
• Operating temperature: +5°C to +40°C
t: +44(0)151 666 8300 f: +44(0)151 666 8329 e: sales@a1-cbiss.com www.a1-cbiss.com