Principal Highway Engineer with over 25 years of experience in roads, highways design, pavement design, technical report writing etc

1. Curriculum vitae
Fawad Mazhar
Fawad Mazhar
Contact : +971 50 9044346
Email: fawad1152@yahoo.com
Present position
Project Manager /Principal Technical Associates
Personal data
Last name Mazhar
First name Fawad
With Command of Military
Works
Since 2016
Education
1990 NED University of Engineering and Technology, Pakistan
Bachelor of Engineering (Civil)
1996 NED University of Engineering and Technology, Pakistan
Master of Engineering (Transportation)
Key qualifications
More than twenty five (25) years of experience in Highway Design Administration and Coordination, exclusively 15
years of experience in Major roads, Freeways, local roads, Residential Infrastructure, Interchanges and Pavement
design in UAE and Pakistan. Expertise in ramping up projects with competent cross – functional skills with an
emphasis on multi discipline coordination in highway design. A keen planner, strategist & implementer with expertise
in establishing & managing entire operations with key focus on bottom line objective by ensuring optimal utilisation of
resources. Holds the distinction of executing numerous projects of diversified nature across the career span.
Spearheaded Design projects including Highways, Roads, and Infrastructure Projects etc. Deft in handling method
engineering with flair for adopting modern design methodologies in compliance with quality standards. Proficient in
executing projects from Concept – to – Launch with focus on project scope and rendering end – to – end solutions.
Conversant with independently developing drawings related to roads using Eagle point 98, 2000, Road calc Ver. 7,
12.01, 13 & 14, Mx Road (Basic), Civil 3D (Basic) HCS ver. 1.5, Circly Ver 5.0, Ms word, Excel. Familiar to AASHTO
standards, Abu Dhabi Road Design Manual, Abu Dhabi Urban Street Design Manual, Abu Dhabi Traffic Control
Device Manual, DMRB UK, Dubai Design Manual and Qatar Design Manual.
Expert in Road Safety Audit in accordance with international Codes & Standards, identify safety issues during design
phase with possible solutions / recommendations.
Expert in Pavement design for Flexible and Rigid structures in accordance with AASHTO Method, well versed with in
house spread sheets and CIRCLY Ver 5.1 for Pavement design Mechanistic method
Managing design / drawings as per standards and codes, checking of complete road drawings including flexible
pavement design calculations of various projects in Pakistan and United Arab Emirates.
Professional experience
2016 – to date Command of Military Works, Abu Dhabi
Principal Technical Associates - Roads / Highways
Responsible to develop design / drawings with team of Road Engineers and Cad

2. Curriculum vitae
Fawad Mazhar
Technicians for different Military projects.
.
2010 – to date Tebodin Middle East
Project Client:
Airolink Construction Company
Project Manager
ABC Private school, Al Shamkha Area: Internal and External roads and parking
areas, including pavement design, storm water and street lighting, produce
detailed design / drawings in due coordination with Client and authorities to get
design approvals within stipulated time frame. Monitor the progress on weekly
basis to control the budget.
FIBREX Construction Group
Project Manager
Khalifa Univetsity Expansion, Al Saada Street, Abu Dhabi: Internal and
External roads and parking areas, including pavement design and storm
water, produce detailed design / drawings in due coordination with Client and
authorities to get design approvals within stipulated time frame. Monitor the
progress on weekly basis to control the budget.
Department of Transport
Design Manager
Design activities related to construction of new Arterial Truck Road from
Mussafah Industrial city to Himeem Interchange at E11, involves the review and
analysis of
three alternatives with concept design of selected option of road approx 20kms,
preparation of roads preliminary and detailed design documents / drawings for
truck road , supervise the team of highway engineers and Cad Technician.
Pavement design calculations for both flexible and rigid using in house spread
sheets based on AASHTO and CIRCLY Ver 5.1 software, report writing,
coordination with Client and internal disciplines.
Responsible to produce quality documents to client within allocated budget.
Preparation of weekly and monthly progress reports, budget control reports etc.
Preparation of Road Safety Audit report with designer response sheet.
Secure, PM LLC, Abu Dhabi, UAE
Design Manager
 Involved in design activities related to internal road network of Police
Training Village of approx length of 6 kms. Coordination with Authorities to
get approval of road design, preparation of concept, schematic and detailed
design / drawings documents.

3. Curriculum vitae
Fawad Mazhar
Responsible to deliver quality documents to client within allocated budget anf
time frame.
Pavement design (Asphalt) in accordance with Abu Dhabi Municipality
Roadway design manual.
Abu Dhabi Ports Company, ADPC, UAE
Team Leader
 Involved in design activities related to secondary infrastructure works of KP8,
KP4 & 5 of approx length of 10 kms. Coordination with Authorities to get
approval of road design, preparation of preliminary and detailed design /
drawings documents. Including pavement design report.
Manage the team of design engineers and cad technicians, coordination with
client and Authorities.
 Involved in design activities related to secondary infrastructure works of KP6
of approx length of 5 kms. Coordination with Authorities to get approval of
road design, preparation of preliminary and detailed design / drawings
documents. Including pavement design report. Preparation of Road Safety
Audit report with designer response sheet.
Manage the team of design engineers and cad technicians, coordination with
client and Authorities.
 Involved in design activities related to secondary infrastructure works of OSA
sub task order of ADPC approx length of 9 kms. Coordination with
Authorities to get approval of road design, preparation of preliminary and
detailed design / drawings documents. Including pavement design report.
Preparation of Road Safety Audit report with designer response sheet.
Manage the team of design engineers and cad technicians, coordination with
client and Authorities.
2007 – 2010 Principal Highway Engineer
 Worked for AECOM Middle East on Al Raha Beach Development Project,
one of Mega Infrastructure development project in UAE history involved a
500 hectare land development will form one part of a rail, bus, fast ferry, and
water taxi network to interconnect Abu Dhabi. Road network consists of 6
interchanges, Freeway, collector and Local roads.
 Involved in design activities related to geometrical design of internal roads as
per international codes and standards, coordination with client and other
disciplines to provide a most feasible solution of design related issues,
involved in Flexible pavement design of roads and interchanges ramps,
preparation of weekly and monthly progress report, Review of BOQ and
tender documents. Project Cost
2005 - 2007 Senior Highway Engineer
 Worked for Halcrow Pakistan Ltd as a senior road design engineer on
various Infrastructure projects i-e
Business Bay: Consists of all type of roads, Arterial, Collector and Local roads,

4. Curriculum vitae
Fawad Mazhar
total length of roads was 31 kms Corridor of road varies from 12.20 m to 63.0
m depending upon the type of road. This sector also includes some
interchanges, at grade intersections and few bridges.
The Lagoons: Consists of all types of roads, Arterial Collector and local roads
of total length of 27 kms. Corridor of road varies from 12.20m to 77.0m
depending upon the type of roads. One of the road of this sector consists of
Light Rail Transit (LRT) with Exclusive Corridor. This sector consists of 20
bridges, 20 road causeways and few foot bridges. This sector also includes
interchanges, intersection and roundabouts.
DHCC (Dubai Health City Centre), Dubai, UAE, consists of road network of
Major Road, Collector and Local roads with few roundabouts ad at grade
intersections. Total length of all roads was 14.0km.
Doha International Airport, Qatar: Involved in design review of entire road
network divided in five 5 areas, Airside service and ground equipment roads,
Airside Perimeter Fence and Patrol Area Roads, Mid Field Area Roads (MAR),
Commercial Area Roads (CAR) and Terminal Roads (TAR).
Geometric and pavement design of access and internal roads of Tawerqi Steel
Mill, Karachi, Pakistan
Infrastructure Design of various Residential Area Projects (40 Areas), Sharjah,
UAE.
Geometric design of residential roads, pavement design, grading plans,
quantities take off of DHA (Defense Housing Authority) Phase II, Infrastructure
project, Islamabad, Pakistan.
Involved in geometrical design of roads, coordination with client and other
disciplines, pavement design calculations, weekly and monthly progress
report.
1990 - 2005 Junior Highway Engineer / Highway Engineer
 Worked for Loya Associates Pakistan Ltd as a Highway design engineer on
various roads / infrastructure projects i-e
Key Responsibilities:
 Geometric Design of Roads
 Flexible Pavement design / Maintenance procedures
 Preparation of Progress and Design Report
 Preparation of B.O.Q and PC-1 Performa
Projects:
 Geometric and Structural Design of 200 Structures (Major and Minor
Bridges, Underpasses etc.) for Pakistan Motorway (Lahore - Islamabad
Section) National Highway Authority Project.
 Gawadar - Ratodero Road Project, NHA:
o Section–III-B, 100 Km (Awaran–
Khuzdar Section)
o Section–II-B, 80 Km (Turbat–Awaran

5. Curriculum vitae
Fawad Mazhar
Section)
o Section–I-A, 158 Km (Khuzdar–
Shadadkot Section).
 Geometric Design of Makran Coastal Road Project (Liari–Ormara Section,
248 Km), construction was completed. Duties also entail preparation of
Feasibility Study Report, PC-1 Performa, Review of Pavement Design,
Traffic Studies/ Forecasting and Earthwork Quantities Calculations by
using ROADCALC, National Highway Authority.
 Detail design of Japanese Funded Rural Road (Basima – Nag Road, 100
Km), construction was completed, involved in Geometric design, traffic
studies/ forecasting, Axle-load study, pavement design, review of soil
investigation, and preparation of Design Report, C&W Department,
Baluchistan.
 Geometric Design of Baleli By-Pass Road Project (6 Kms), Government of
Baluchistan.
 Geometric Design of Road between Zehri and Gandawa (80 Kms),
Government of Baluchistan.
 Involved in Geometric Design, Preparation of Feasibility Study Report and
PC-1 Performa, for Sui Sohbatpur Road Project (121 Kms), C&W Dept.
Government of Baluchistan.
 Completely involved in Geometric Design of Road SAZDA-II, 100 Km from
Naragate to Jamrao Headwork’s, Government of Sindh, also involved in
preparation of Traffic Study report and Design Report.
 Geometric Design of Road SAZDA-III, 77 Km from Diplo to Islamkot,
Government of Sindh, also involved in preparation of cross-sections by
using ROADCALC.
 Involved in a World Bank Financed Project, Improvements of Traffic
Conditions at 39 Major Intersections of Karachi, TEB, (KDA), Karachi.
Responsibilities included:
o Management and Supervision of Six (6)
difference types of traffic surveys involving over 100 enumerators.
 Data Processing.
 Preparation of PC-1 and Feasibility Report.
 Geometric Design of Intersections.
 Preparation of BOQ’s and Cost Estimates.
 Involved in Geometrical layout of approaches for various Overhead/ River
Bridges as:
o Railway Overhead Bridge at Larkana -
Pakistan Railways.
o Nihing River Bridge near Turbat - C&W
Dep’t. Baluchistan.
o Nari – Kumbri River Bridge - C&W
Dep’t. Baluchistan.
o Bridge on Tarkha – Khwar River - NHA,
Islamabad.
o Rashid Minhas Flyover - KDA, Karachi.
o University Road Overhead Bridge -
KDA, Karachi.
o Five Bridges on N-65 (Quetta-Sibbi
Section) - NHA, Islamabad.

6. Curriculum vitae
Fawad Mazhar
 Involved in Geometric Design, Traffic Studies/ Forecasting, Axle-Load
Study, Pavement Design, Review of Soil Investigation, Preparation of
Design Report for Improvement of National Highway N-50 Section-I,
Kuchlac to Muslim Bagh, NHA Islamabad.
 Involved in Designing of Culvert and Pavement on watercourse near PSO
S/S-II (Ex. M. G. Motors, Karachi) project of Pakistan State Oil.
 Completely involved in Improvement of Road network and Water Drainage
System at Darul-ul-Uloom Korangi Karachi, preparation of Typical Cross
sections, Bill of Quantities etc.
 Detail design of Japanese funded Road (Basima – Nag Road) extended
portion (27 Km) from Basima towards Kharan side, involved in Geometric
Design, Quantities take off by Roadcalc.
 Involved in detail design of Road network in South Western Industrial
Zone, Port Qasim, preparation of Tender Drawings and Documents.
 Outline survey design of Sibbi-Bibinani road (75-Km)
 Involved in Geometrical layout of Approaches for Eight Bridges namely:
o 4 Nos. Bridges on Sibbi – Harnai Road
namely Begi Bridge (450 Rft), Gozhees Bridge (200 Rft), Keryak
Bridge (350 Rft.), Belli Bridge (1100 Rft).
o 3 Nos. Bridges on Lahri – Sangsila –
Dera Bugti Road) namely Bridge on Maiwah River (350 Rft), Bridge on
Lahri River (60 Rft), Bridge on Gori River (150 Rft).
o Bridge on Dera Bugti–Sui Road on
Peshbogi Section (150 Rft).
 Detailed Design of Quetta Western Bypass 23Km, NHA, Islamabad,
including PC-1, Performa.
 Outline Design of Sibbi to Bibi-Nani Bridge 75 Km.
 Geometrical Layout/Design of flyovers at
o Shahrah-e-Faisal and Korangi road
intersection (FTC flyover).
o Shahrah-e-Quaideen Flyover.
(Including, pavement design of loops/rams, capacity analysis and
preparation of diversion plans etc.)
 Detailed Design of Re-alignment of N-65 through Daraz-Bend (2.0-Km)
and Kolpur town area (5.0 Km), including preparation of cost estimates
and PC-1, NHA, Islamabad.
 Involved in
o Improvement of N-50, National
highway, Preparation of Global PC-1, Performa for the entire length
(305 KM).
Membership of professional bodies
 Pakistan Engineering Council (PEC)
Life time membership (Professional engineer)

7. Curriculum vitae
Fawad Mazhar