1. 1
VEENADHARIBAVANAM
Senior Engineer
I am a Civil Engineer with experience in Design, 3D
Modelling and Quantity Estimation of Highways.
CORE SKILLS
 Digital Terrain Model
 Geometric design of roads
 Detailed Design
 Plan & profile production
 3D Modelling
 BIM Level 1
 Traffic surveys
 Project Management
 Resource and Budget
planning
ROLE ON THIS PROJECT
 Senior Engineer
POSITION
 Highway design Engineer
 Senior Engineer
 Project Manager
QUALIFICATIONS
 B.Tech. (Civil)
 M.E (Highway Engineering)
MEMBERSHIPS
I am master’s in Civil engineering with 8 years of experience in the field
of transport infrastructure system covering preparation of digital terrain
model, geometric design of highways, roads(township layouts), junction
improvements, bicycle paths, 3D Modelling, GIS, Clash detection
analysis, drainage design of roads, preparation of plan and profile
drawings, generation of cross sections, quantity estimation and value
engineering.
Has good experience in working on International Projects in the markets
of India, Qatar, Sweden & Denmark. Well Versed with design codes
such as IRC, QHDM, and Vägveket (Sweden) .Has knowledge in
DMRB. Project Experience includes Detailed design of Doha
Expressway (Northwest of Al Dafna), Detailed design for widening
projects in India.
Proficient in design software’s like Civil 3D, MX- Road Suite, Inroads
and Vehicle track.
Involved in various engineering surveys and their analysis. Possess
international customer interaction experience, Coordinated with onsite
team in understanding the requirements and working directly with onsite
team. Proposal preparation for Business Development, Coordinating
with clients / sub-consultants & supervising surveys.
ProfessionalHistory
Year Position Company Country
2015, Mar Senior
Engineer
Arcadis India
2013, Sep –
2015, Mar
Highway
Design
Engineer
WSP Consulting
India Pvt Ltd.
India
2012, Dec –
2007, Sep
Senior
Engineer
L&T Ramboll
Consulting India Pvt
Ltd.
India

2. Veenadhari Bavanam
2
ProjectSummary
2016 July- Ongoing ARCADIS Pvt Ltd
Senior Engineer
M6 J2 to 4 SMP-VRS Modelling
As a project manager I was responsible for co-ordination with
UK team, assigning tasks to team members & reviewing the
design outputs.
2015 Mar- 2016
July
ARCADIS Pvt Ltd
Senior Engineer
P026-Major Roads Northwest of Al Dafna - Qatar Public
Works Authority (ASHGHAL)
This is a part of Doha expressway project package. It
encompasses the upgradation of existing dual carriageway to 6 /
8 lanes. It includes, service/ access roads throughout the stretch
with two 2 level signalized T-junctions, one 3 level SPUI, one 2
level SPUI & one 2 level junction.
As a Project Engineer , I am responsible for
 Understanding the 2D layout sent from Lead office
 Profile Optimization
 3D modelling for two 2 level junctions (AutoCAD
Civil3D,2013)
 GIS data preparation
As a Deputy PM , I am responsible for review of design outputs
 Plan & profile
 Cross sections @ 50 m intervel
 Design models
 3D modelling & XML’s of whole project
Civil 3D 2013 has been used.
2013 Nov- 2014
June
WSP Consulting India Pvt Ltd, Civils- Sweden
Highway Design Engineer
Detailed design Engineering for Frosundaladen, Solna ,
Stockholm
It is a motorway project widening from 4 to 6 lanes consisting of
exclusive bus lanes, 3 Underpasses, 3 major junctions and one
major Interchange connecting E4. Bicyclepaths are all around the
project stretch.
As a Design Engineer, I was responsible for designing of
optimized vertical profile, Improvement of junctions, generation of
cross sections, Preparation of roadway model & production of
drawings using AutoCAD Civil3D.
2014 July- 2014
Sep
WSP Consulting India Pvt Ltd, Civils- Sweden
Highway Design Engineer

3. Veenadhari Bavanam
3
Detailed design Engineering for Vattermelan, Jarfall
community, Stockholm
I was involved in this project as a Design Engineer. It is a township
project. I was responsible for preparation of plan and profile,
generation of heights plan, Preparation of roadway model,
quantities & production of drawings for all the internal roads.
2014 Aug- 2015
Feb
WSP Consulting India Pvt Ltd, Civils- Sweden
Highway Design Engineer
Detailed design Engineering for Enercon,Luleå, Sweden
As a design engineer, I was responsible for the preparation of
internal roads access roads and crane platforms for wind power
energy generation project. It includes junction design and turning
movements studies. As a team member involved in profile design
and junction design and quantity calculations using AutoCAD
Civil3D.
2014 Nov- 2015
Feb
WSP Consulting India Pvt Ltd, Civils- Sweden
Highway Design Engineer
Detailed design Engineering for Kableverket, Stockholm
It is a township project includes designing of internal roads. As a
team member involved in preparation of plan and profile,
generation of heights plan, Preparation of roadway model,
quantities & production of drawings using AutoCAD Civil3D.
2014 July - 2014
Sep
WSP Consulting India Pvt Ltd, Civils- Sweden
Highway Design Engineer
Detailed design engineering for Vag711, Bracke-Albacken
It is a widening and reinforcement project about 33 km. It includes
improvement of geometric design, optimisation of road profile &
preparation of road plans. As a team member involved in
geometric design and preparation of roadway plans using
AutoCAD Civil3D.
2010 June- 2011
Dec
L&T-Ramboll Consulting India Pvt Limited
Senior Engineer
Detailed Design for Four Laning of Sambhalpur-Baragarh-
Orissa/ Chattisgarh Section of NH-6
I was involved as Project Engineer for the following activities:
 Detailed design of 30 km stretch from Km 30 – Km 70
(Bypass 43km-51km) including fixing the horizontal
alignment according to DPR report. It contains 2 ROB’s
and 4VUP’s, 3PUP’s.
 Optimization of road profile such that maximum
utilization of existing road.
 Design of service road around 10 km and junctions.
 Detailed design of drainage including earthen and pitched
drain at service road locations.
 Preparation of Detailed design drawings both for Road
and Drainage.

4. Veenadhari Bavanam
4
 Validation of quantities with the pre-tendering stage.
 MX Road Suite (Select Series 1) has been used.
2011 Mar – 2012
July
L&T-Ramboll Consulting India Pvt Limited
Senior Engineer
Six-Laning of Chilkaluriupet-Nellore Section of NH-5 from km
1182.802 to Km 1366.547(Length-183.620 Km) in the State of
Andhra Pradesh under NHDP Phase-V as BOT (Toll) on
DBFOT Pattern
I was involved as Project Engineer for the following activities:
 Detailed design of 30 km stretch from Km 1303/000 – Km
1333/000 including fixing the horizontal alignment based
on existing 4-lane centreline, optimization of road profile
such that maximum utilization of existing road. Design of
service road. It contains 3VUP’s and 4PUP’s.
 Preparation of detailed design drawings for road and
validation of quantities with the pre-tendering stage.
 Detailed drainage design for 100 km stretch which
includes earth drain at normal sections, pipe drain or box
drain at structure locations with optimum size.
 Preparation of detailed drainage design plan and profile.
 Preparation of detailed drainage design worksheets.
 Preparation of detailed drainage design drawings.
 MX Road Suite (Select Series 1) has been used.
2011 Aug- 2011Dec L&T-Ramboll Consulting India Pvt Limited
Senior Engineer
Detailed Design of Køge Bugt Motorway, six to eight laning
of 8.5 Km section, Denmark
This is a motorway project which is under expansion from six
lanes to eight lanes with Conceptual & Detailed design phases. I
was involved in geometric design of four crossing roads
(Underpasses & Overpasses). Geometric design is being done in
Inroads software with Microstation platform. Also includes
preparation of design drawings & bill of quantities using Inroads
software.
2011Sep- 2011 Nov L&T-Ramboll Consulting India Pvt Limited
Senior Engineer
Conceptual Design for Route 26 Viborg-Aarhus
I was involved in Preparation of roadway model for north
alternative. Preparation of string model and 3D face model.
2010 Mar- 2010
Aug
L&T-Ramboll Consulting India Pvt Limited
Senior Engineer
 Pre-Tender Services for Delhi-Agra of NH-2 on BOT-
DBFOT Annuity Basis
 Pre-Tender Engineering Services for Panvel –Indapur
Section of NH-6

5. Veenadhari Bavanam
5
 Pre-Tender Services for six laning Etawah-Chakeri
(Kanpur) section of NH-2 on DBFOT Toll Basis Six Laning
of Chennai-Tada
I was involved in Quantity Estimation for Pavements,
Intersections, Drainage, Bus bays, Maintenance and Value
Engineering
2009 Aug- 2010
Dec
L&T-Ramboll Consulting India Pvt Limited
Senior Engineer
Design Engineering for Vag 19 Tomelilla - Degeberga
It is a widening project from 1+1 to 2+1 (1+2). As a highway
engineer responsible for roadway design in terms of carriageway
according to desired widening locations and markings.
Preparation of cross sections at desired widening sections and
computation of quantities. This project has been using Inroads
and nova point software with auto cad as platform.
2009 Jan- 2009 Sep L&T-Ramboll Consulting India Pvt Limited
Senior Engineer
Design Engineering for Ostra – Glomsta
It is an urban road network project near Stockholm. As a highway
engineer responsible for design of horizontal alignment and
vertical profile and generation of quantities. Making land
acquisition plans for each land owner.
2008 May- 2008
Sep
L&T-Ramboll Consulting India Pvt Limited
Senior Engineer
Pretender services for Vag 34 Hogsby-Malilla
Preparation of quantities according to various pavement design
alternatives. The project involved rock surface. Preparation digital
terrain models for earth and rock. Preparation of detailed cross
sections for different pavement alternatives according contractor
requirements and to optimize project cost. Preparation of Bill of
Quantities. Preparation of plan and profile drawings using Inroads
V8i version.
2008 Mar- 2009
Feb
L&T-Ramboll Consulting India Pvt Limited
Senior Engineer
Design Engineering for Vag 50 Genom Motala
Vag 50 is a 6 km Bypass road project in Motala city including three
elevated junctions and pedestrian and bicycle tracks. As a team
member I was involved in modifying the horizontal alignment and
vertical profile of the main road according revised Swedish codes
at proposed stretches. Making horizontal and vertical profile for
side roads. Preparation of plan and profile drawings using Inroads
V8i version.

6. Veenadhari Bavanam
6
TRAININGS & SEMINARS
Date Details
2016 Global E-training On Navisworks, Infraworks, BIM 360 is Going
on.
2015 In-house Micro station training
2014 In house Civil 3D training
QUALIFICATIONS
Qualification M.E Highway Engineering
College UVCE , Bangalore University
Term Sep 2005 – Sep 2007
Qualification B.Tech – Civil Engineering
College JNTU Technological University
Term August 2001 – May 2005