This paper is an extended review paper about the use of a new intensity formula in optical emission spectroscopy, atmospheric physics and astronomy. The laboratory data of atomic- and ionic spectra from different light sources do support the new formula. In the atmospheric field dominant light mechanisms in aurora have been revealed, which follow the new formula. The inverse of this formula can also be used to show the photoelectric effect for many elements. In astronomy new methods have been developed of determining electron- and effective temperature, density and mass of stars with the new formula as a basis, which are in accordance with literature values. An investigation of the Balmer lines in the sun shows that they do follow the new formula. Therefore the new formula is important in the sun and the stars.
Stellar Measurements with the New Intensity FormulaIOSR Journals
In this paper a linear relationship in stellar optical spectra has been found by using a
spectroscopical method used on optical light sources where it is possible to organize atomic and ionic data.
This method is based on a new intensity formula in optical emission spectroscopy (OES). Like the HR-diagram ,
it seems to be possible to organize the luminosity of stars from different spectral classes. From that organization
it is possible to determine the temperature , density and mass of stars by using the new intensity formula. These
temperature, density and mass values agree well with literature values. It is also possible to determine the mean
electron temperature of the optical layers (photospheres) of the stars as it is for atoms in the for laboratory
plasmas. The mean value of the ionization energies of the different elements of the stars has shown to be very
significant for each star. This paper also shows that the hydrogen Balmer absorption lines in the stars follow
the new intensity formula.
This is the plenary talk given by Prof Shyue Ping Ong at the 57th Sanibel Symposium held on St Simon's Island in Georgia, USA.
Abstract: Powered by methodological breakthroughs and computing advances, electronic structure methods have today become an indispensable toolkit in the materials designer’s arsenal. In this talk, I will discuss two emerging trends that holds the promise to continue to push the envelope in computational design of materials. The first trend is the development of robust software and data frameworks for the automatic generation, storage and analysis of materials data sets. The second is the advent of reliable central materials data repositories, such as the Materials Project, which provides the research community with efficient access to large quantities of property information that can be mined for trends or new materials. I will show how we have leveraged on these new tools to accelerate discovery and design in energy and structural materials as well as our efforts in contributing back to the community through further tool or data development. I will also provide my perspective on future challenges in high-throughput computational materials design.
UCSD NANO 266 Quantum Mechanical Modelling of Materials and Nanostructures is a graduate class that provides students with a highly practical introduction to the application of first principles quantum mechanical simulations to model, understand and predict the properties of materials and nano-structures. The syllabus includes: a brief introduction to quantum mechanics and the Hartree-Fock and density functional theory (DFT) formulations; practical simulation considerations such as convergence, selection of the appropriate functional and parameters; interpretation of the results from simulations, including the limits of accuracy of each method. Several lab sessions provide students with hands-on experience in the conduct of simulations. A key aspect of the course is in the use of programming to facilitate calculations and analysis.
UCSD NANO 266 Quantum Mechanical Modelling of Materials and Nanostructures is a graduate class that provides students with a highly practical introduction to the application of first principles quantum mechanical simulations to model, understand and predict the properties of materials and nano-structures. The syllabus includes: a brief introduction to quantum mechanics and the Hartree-Fock and density functional theory (DFT) formulations; practical simulation considerations such as convergence, selection of the appropriate functional and parameters; interpretation of the results from simulations, including the limits of accuracy of each method. Several lab sessions provide students with hands-on experience in the conduct of simulations. A key aspect of the course is in the use of programming to facilitate calculations and analysis.
NANO281 is the University of California San Diego NanoEngineering Department's first course on the application of data science in materials science. It is taught by Professor Shyue Ping Ong of the Materials Virtual Lab (http://www.materialsvirtuallab.org).
Stellar Measurements with the New Intensity FormulaIOSR Journals
In this paper a linear relationship in stellar optical spectra has been found by using a
spectroscopical method used on optical light sources where it is possible to organize atomic and ionic data.
This method is based on a new intensity formula in optical emission spectroscopy (OES). Like the HR-diagram ,
it seems to be possible to organize the luminosity of stars from different spectral classes. From that organization
it is possible to determine the temperature , density and mass of stars by using the new intensity formula. These
temperature, density and mass values agree well with literature values. It is also possible to determine the mean
electron temperature of the optical layers (photospheres) of the stars as it is for atoms in the for laboratory
plasmas. The mean value of the ionization energies of the different elements of the stars has shown to be very
significant for each star. This paper also shows that the hydrogen Balmer absorption lines in the stars follow
the new intensity formula.
This is the plenary talk given by Prof Shyue Ping Ong at the 57th Sanibel Symposium held on St Simon's Island in Georgia, USA.
Abstract: Powered by methodological breakthroughs and computing advances, electronic structure methods have today become an indispensable toolkit in the materials designer’s arsenal. In this talk, I will discuss two emerging trends that holds the promise to continue to push the envelope in computational design of materials. The first trend is the development of robust software and data frameworks for the automatic generation, storage and analysis of materials data sets. The second is the advent of reliable central materials data repositories, such as the Materials Project, which provides the research community with efficient access to large quantities of property information that can be mined for trends or new materials. I will show how we have leveraged on these new tools to accelerate discovery and design in energy and structural materials as well as our efforts in contributing back to the community through further tool or data development. I will also provide my perspective on future challenges in high-throughput computational materials design.
UCSD NANO 266 Quantum Mechanical Modelling of Materials and Nanostructures is a graduate class that provides students with a highly practical introduction to the application of first principles quantum mechanical simulations to model, understand and predict the properties of materials and nano-structures. The syllabus includes: a brief introduction to quantum mechanics and the Hartree-Fock and density functional theory (DFT) formulations; practical simulation considerations such as convergence, selection of the appropriate functional and parameters; interpretation of the results from simulations, including the limits of accuracy of each method. Several lab sessions provide students with hands-on experience in the conduct of simulations. A key aspect of the course is in the use of programming to facilitate calculations and analysis.
UCSD NANO 266 Quantum Mechanical Modelling of Materials and Nanostructures is a graduate class that provides students with a highly practical introduction to the application of first principles quantum mechanical simulations to model, understand and predict the properties of materials and nano-structures. The syllabus includes: a brief introduction to quantum mechanics and the Hartree-Fock and density functional theory (DFT) formulations; practical simulation considerations such as convergence, selection of the appropriate functional and parameters; interpretation of the results from simulations, including the limits of accuracy of each method. Several lab sessions provide students with hands-on experience in the conduct of simulations. A key aspect of the course is in the use of programming to facilitate calculations and analysis.
NANO281 is the University of California San Diego NanoEngineering Department's first course on the application of data science in materials science. It is taught by Professor Shyue Ping Ong of the Materials Virtual Lab (http://www.materialsvirtuallab.org).
By using the anharmonic correlated einstein model to define the expressions o...Premier Publishers
By using potential effective interaction in the anharmonic correlated Einstein model on the basis of quantum statistical theory with phonon interaction procedure, the expressions describing asymmetric component (cumulants) and thermodynamic parameters including the anharmonic effects contributions and by new structural parameters of cubic crystals have been formulated. These new parameters describe the distribution of atoms. The expansion of cumulants and thermodynamic parameters through new structural parameters has been performed. The results of this study show that, developing further the anharmonic correlated Einstein model it obtained a general theory for calculation cumulants and thermodynamic parameters in XAFS theory including anharmonic contributions. The expressions are described through new structural parameters that agree with structural contributions of cubic crystals like face center cubic (fcc), body center cubic (bcc).
Solution Manual for Physical Chemistry – Robert AlbertyHenningEnoksen
https://www.book4me.xyz/solution-manual-physical-chemistry-alberty/
Solution Manual for Physical Chemistry - 6th Edition
Author(s) : Robert A. Alberty
This solution manual include all chapters of textbook (1 to 21).
UCSD NANO 266 Quantum Mechanical Modelling of Materials and Nanostructures is a graduate class that provides students with a highly practical introduction to the application of first principles quantum mechanical simulations to model, understand and predict the properties of materials and nano-structures. The syllabus includes: a brief introduction to quantum mechanics and the Hartree-Fock and density functional theory (DFT) formulations; practical simulation considerations such as convergence, selection of the appropriate functional and parameters; interpretation of the results from simulations, including the limits of accuracy of each method. Several lab sessions provide students with hands-on experience in the conduct of simulations. A key aspect of the course is in the use of programming to facilitate calculations and analysis.
24 Polarization observable measurements for γp → K+Λ and γp → K+Σ for energie...Cristian Randieri PhD
Polarization observable measurements for γp → K+Λ and γp → K+Σ for energies up to 1.5 GeV - The European Physical Journal A, Hadrons and Nuclei, January 2007, Vol. 31, N. 1, pp. 73-93, ISSN: 1434-6001, doi: 10.1140/epja/i2006-10167-8
di A. Lleres, O. Bartalini, V. Bellini, J. P. Bocquet, P. Calvat, M. Capogni, L. Casano, M. Castoldi, A. D'Angelo, J. P. Didelez, R. Di Salvo, A. Fantini, C. Gaulard, G. Gervino, F. Ghio, B. Girolami, A. Giusa, M. Guidal, E. Hourany, V. Kouznetsov, R. Kunne, A. Lapik, P. Levi Sandri, D. Moricciani, A. N. Mushkarenkov, V. Nedorezov, L. Nicoletti, C. Perrin, C. Randieri, D. Rebreyend, F. Renard, N. Rudnev, T. Russew, G. Russo, C. Schaerf, M. L. Sperduto, M. C. Sutera, A. Turinge (2007)
Abstract
Beam asymmetries and hyperon recoil polarizations for the reactions γ p → K +Λ and γ p → K +Σ0 have been measured from the threshold production to 1500MeV with the GRAAL facility located at the ESRF in Grenoble. These results complement the database for the beam asymmetry, covering for the first time the production threshold region. Recent theoretical analyses are presented for which the beam asymmetry data bring interesting new information and allow to better determine some resonance parameters. Most importantly, these results strengthen the need of a new D13 state around 1900MeV.
33 Measurement of beam-recoil observables Ox, Oz and target asymmetry T for t...Cristian Randieri PhD
Measurement of beam-recoil observables Ox, Oz and target asymmetry T for the reaction γρ → K+Λ - The European Physical Journal A, Hadrons and Nuclei, February 2009, Vol. 39, N. 2, pp. 149–161, ISSN: 1434-6001, doi: 10.1140/epja/i2008-10713-4
di A. Lleres, O. Bartalini, V. Bellini, J. P. Bocquet, P. Calvat, M. Capogni, L. Casano, M. Castoldi, A. D’Angelo, J. P. Didelez, R. Di Salvo, A. Fantini, D. Franco, C. Gaulard, G. Gervino, F. Ghio, B. Girolami, A. Giusa, M. Guidal, E. Hourany, R. Kunne, V. Kuznetsov, A. Lapik, P. Levi Sandri, F. Mammoliti, G. Mandaglio, D. Moricciani, A. N. Mushkarenkov, V. Nedorezov, L. Nicoletti, C. Perrin, C. Randieri, D. Rebreyend, F. Renard, N. Rudnev, T. Russew, G. Russo, C. Schaerf, M. L. Sperduto, M. C. Sutera, A. Turinge, V. Vegna (2009)
Abstract
The double polarization (beam-recoil) observables Ox and Oz have been measured for the reac- tion γp → K+Λ from threshold production to E ∼ 1500MeV. The data were obtained with the linearly polarized beam of the GRAAL facility. Values for the target asymmetry T could also be extracted despite the use of an unpolarized target. Analyses of our results by two isobar models tend to confirm the necessity to include new or poorly known resonances in the 1900MeV mass region.
FOR HUMANITY: (V4) A BREAKTHROUGH IN TOKAMAK APPLIED PHYSICS GRAVITATIONAL WA...GLOBAL HEAVYLIFT HOLDINGS
To whom it may concern: (Note: Abbreviated acknowledgement narrative by Dr. Andrew W. Beckwith )
The author, Dr. Andrew Beckwith, authorizes Myron D. Stokes, Publisher, eMOTION! REPORTS.com, a legacy automotive/aerospace research and analysis site and Managing Director, Global HeavyLift Holdings, Inc., a Defense Logistics Agency listed Federal Contractor, as to the dissemination of the following Tokamak applied physics notes for Gravitational wave generation, as his acting manager of public release of the aforementioned document. The information within will be peer reviewed , but the basic technology is intended for humankind as far as fundamental physics advancement world wide.
The notes, within, were created by Dr. Beckwith, in the Keyuan Hotel in room 1205, in Chongqing, PRC, as part of a joint USA-PRC endeavor as to GW physics; the notes are correctly identified by Gary Stephenson , as a civilian employee of the US air force, as pertinent to " Higher drift current during fusion burning" as an enabler of high GW amplitudes, of the order of h ~ 10^-25 to 10^-26 which are candidates for testing of GW direct identification technology incurrent development in both PRC and in America. The notes were also written up as of November 4 to November 12, in an eight day period, in room 1205 of the Keyuan hotel as of Chongqing University under the auspices of Chongqing University department of physics, in work which was enabled by the hospitality of Chongqing University which took unusually comprehensive steps as to the proper circumstances for the creation of this work so cited by the Author.
The following individuals should be thanked as far as their discussions and input as to formation of the "Higher drift current during fusion burning" which is crucial to the development of this material.
a. Dr. Fangyu Li, whose interest in Tokamak physics never flagged, as to its utilization. He informed the author during a stay from November 2 to November 13 of his partnership with a Tokamak fusion laboratory as of Hefei, PRC, which would serve as a test bed of GW amplitudes. His physics questions were timelyand very important during the 12 days of stay in Chongqing University.
b. Dr. Fan, Chief scientific administrator of Chongqing University wrote in administrative authorization of Dr. Beckwith's visit to Chongqing University and also as part of a 40 year friendship with Dr. Li, accompanied Dr. Li to the Tokamak fusion laboratory as of Hefei, PRC, which the author saw in photographs as to the facility, and the chief engineering officer who runs the Hefei Tokamak facility
The above written statement should be part of a slide share release of this basic information as set up by Myron D. Stokes, of Global Heavylift Holdings corporation without further delay.
Andrew Beckwith, PhD, written in Setauket, New York, as of 6 PM, November 16 ( November 17, PRC time, Chongqing), 2013
UCSD NANO 266 Quantum Mechanical Modelling of Materials and Nanostructures is a graduate class that provides students with a highly practical introduction to the application of first principles quantum mechanical simulations to model, understand and predict the properties of materials and nano-structures. The syllabus includes: a brief introduction to quantum mechanics and the Hartree-Fock and density functional theory (DFT) formulations; practical simulation considerations such as convergence, selection of the appropriate functional and parameters; interpretation of the results from simulations, including the limits of accuracy of each method. Several lab sessions provide students with hands-on experience in the conduct of simulations. A key aspect of the course is in the use of programming to facilitate calculations and analysis.
By using the anharmonic correlated einstein model to define the expressions o...Premier Publishers
By using potential effective interaction in the anharmonic correlated Einstein model on the basis of quantum statistical theory with phonon interaction procedure, the expressions describing asymmetric component (cumulants) and thermodynamic parameters including the anharmonic effects contributions and by new structural parameters of cubic crystals have been formulated. These new parameters describe the distribution of atoms. The expansion of cumulants and thermodynamic parameters through new structural parameters has been performed. The results of this study show that, developing further the anharmonic correlated Einstein model it obtained a general theory for calculation cumulants and thermodynamic parameters in XAFS theory including anharmonic contributions. The expressions are described through new structural parameters that agree with structural contributions of cubic crystals like face center cubic (fcc), body center cubic (bcc).
Solution Manual for Physical Chemistry – Robert AlbertyHenningEnoksen
https://www.book4me.xyz/solution-manual-physical-chemistry-alberty/
Solution Manual for Physical Chemistry - 6th Edition
Author(s) : Robert A. Alberty
This solution manual include all chapters of textbook (1 to 21).
UCSD NANO 266 Quantum Mechanical Modelling of Materials and Nanostructures is a graduate class that provides students with a highly practical introduction to the application of first principles quantum mechanical simulations to model, understand and predict the properties of materials and nano-structures. The syllabus includes: a brief introduction to quantum mechanics and the Hartree-Fock and density functional theory (DFT) formulations; practical simulation considerations such as convergence, selection of the appropriate functional and parameters; interpretation of the results from simulations, including the limits of accuracy of each method. Several lab sessions provide students with hands-on experience in the conduct of simulations. A key aspect of the course is in the use of programming to facilitate calculations and analysis.
24 Polarization observable measurements for γp → K+Λ and γp → K+Σ for energie...Cristian Randieri PhD
Polarization observable measurements for γp → K+Λ and γp → K+Σ for energies up to 1.5 GeV - The European Physical Journal A, Hadrons and Nuclei, January 2007, Vol. 31, N. 1, pp. 73-93, ISSN: 1434-6001, doi: 10.1140/epja/i2006-10167-8
di A. Lleres, O. Bartalini, V. Bellini, J. P. Bocquet, P. Calvat, M. Capogni, L. Casano, M. Castoldi, A. D'Angelo, J. P. Didelez, R. Di Salvo, A. Fantini, C. Gaulard, G. Gervino, F. Ghio, B. Girolami, A. Giusa, M. Guidal, E. Hourany, V. Kouznetsov, R. Kunne, A. Lapik, P. Levi Sandri, D. Moricciani, A. N. Mushkarenkov, V. Nedorezov, L. Nicoletti, C. Perrin, C. Randieri, D. Rebreyend, F. Renard, N. Rudnev, T. Russew, G. Russo, C. Schaerf, M. L. Sperduto, M. C. Sutera, A. Turinge (2007)
Abstract
Beam asymmetries and hyperon recoil polarizations for the reactions γ p → K +Λ and γ p → K +Σ0 have been measured from the threshold production to 1500MeV with the GRAAL facility located at the ESRF in Grenoble. These results complement the database for the beam asymmetry, covering for the first time the production threshold region. Recent theoretical analyses are presented for which the beam asymmetry data bring interesting new information and allow to better determine some resonance parameters. Most importantly, these results strengthen the need of a new D13 state around 1900MeV.
33 Measurement of beam-recoil observables Ox, Oz and target asymmetry T for t...Cristian Randieri PhD
Measurement of beam-recoil observables Ox, Oz and target asymmetry T for the reaction γρ → K+Λ - The European Physical Journal A, Hadrons and Nuclei, February 2009, Vol. 39, N. 2, pp. 149–161, ISSN: 1434-6001, doi: 10.1140/epja/i2008-10713-4
di A. Lleres, O. Bartalini, V. Bellini, J. P. Bocquet, P. Calvat, M. Capogni, L. Casano, M. Castoldi, A. D’Angelo, J. P. Didelez, R. Di Salvo, A. Fantini, D. Franco, C. Gaulard, G. Gervino, F. Ghio, B. Girolami, A. Giusa, M. Guidal, E. Hourany, R. Kunne, V. Kuznetsov, A. Lapik, P. Levi Sandri, F. Mammoliti, G. Mandaglio, D. Moricciani, A. N. Mushkarenkov, V. Nedorezov, L. Nicoletti, C. Perrin, C. Randieri, D. Rebreyend, F. Renard, N. Rudnev, T. Russew, G. Russo, C. Schaerf, M. L. Sperduto, M. C. Sutera, A. Turinge, V. Vegna (2009)
Abstract
The double polarization (beam-recoil) observables Ox and Oz have been measured for the reac- tion γp → K+Λ from threshold production to E ∼ 1500MeV. The data were obtained with the linearly polarized beam of the GRAAL facility. Values for the target asymmetry T could also be extracted despite the use of an unpolarized target. Analyses of our results by two isobar models tend to confirm the necessity to include new or poorly known resonances in the 1900MeV mass region.
FOR HUMANITY: (V4) A BREAKTHROUGH IN TOKAMAK APPLIED PHYSICS GRAVITATIONAL WA...GLOBAL HEAVYLIFT HOLDINGS
To whom it may concern: (Note: Abbreviated acknowledgement narrative by Dr. Andrew W. Beckwith )
The author, Dr. Andrew Beckwith, authorizes Myron D. Stokes, Publisher, eMOTION! REPORTS.com, a legacy automotive/aerospace research and analysis site and Managing Director, Global HeavyLift Holdings, Inc., a Defense Logistics Agency listed Federal Contractor, as to the dissemination of the following Tokamak applied physics notes for Gravitational wave generation, as his acting manager of public release of the aforementioned document. The information within will be peer reviewed , but the basic technology is intended for humankind as far as fundamental physics advancement world wide.
The notes, within, were created by Dr. Beckwith, in the Keyuan Hotel in room 1205, in Chongqing, PRC, as part of a joint USA-PRC endeavor as to GW physics; the notes are correctly identified by Gary Stephenson , as a civilian employee of the US air force, as pertinent to " Higher drift current during fusion burning" as an enabler of high GW amplitudes, of the order of h ~ 10^-25 to 10^-26 which are candidates for testing of GW direct identification technology incurrent development in both PRC and in America. The notes were also written up as of November 4 to November 12, in an eight day period, in room 1205 of the Keyuan hotel as of Chongqing University under the auspices of Chongqing University department of physics, in work which was enabled by the hospitality of Chongqing University which took unusually comprehensive steps as to the proper circumstances for the creation of this work so cited by the Author.
The following individuals should be thanked as far as their discussions and input as to formation of the "Higher drift current during fusion burning" which is crucial to the development of this material.
a. Dr. Fangyu Li, whose interest in Tokamak physics never flagged, as to its utilization. He informed the author during a stay from November 2 to November 13 of his partnership with a Tokamak fusion laboratory as of Hefei, PRC, which would serve as a test bed of GW amplitudes. His physics questions were timelyand very important during the 12 days of stay in Chongqing University.
b. Dr. Fan, Chief scientific administrator of Chongqing University wrote in administrative authorization of Dr. Beckwith's visit to Chongqing University and also as part of a 40 year friendship with Dr. Li, accompanied Dr. Li to the Tokamak fusion laboratory as of Hefei, PRC, which the author saw in photographs as to the facility, and the chief engineering officer who runs the Hefei Tokamak facility
The above written statement should be part of a slide share release of this basic information as set up by Myron D. Stokes, of Global Heavylift Holdings corporation without further delay.
Andrew Beckwith, PhD, written in Setauket, New York, as of 6 PM, November 16 ( November 17, PRC time, Chongqing), 2013
UCSD NANO 266 Quantum Mechanical Modelling of Materials and Nanostructures is a graduate class that provides students with a highly practical introduction to the application of first principles quantum mechanical simulations to model, understand and predict the properties of materials and nano-structures. The syllabus includes: a brief introduction to quantum mechanics and the Hartree-Fock and density functional theory (DFT) formulations; practical simulation considerations such as convergence, selection of the appropriate functional and parameters; interpretation of the results from simulations, including the limits of accuracy of each method. Several lab sessions provide students with hands-on experience in the conduct of simulations. A key aspect of the course is in the use of programming to facilitate calculations and analysis.
Understanding Intrinsic Properties ofBiological Molecules in Absence of Sol...jennypswong
The dissociation kinetics of a small biological molecule, leucine enkephalin (LE), are examined using a Quadruple Ion Trap Mass Spectrometer in order to determine the effect of activation waveform on ion effective temperature (Teff). The effective temperature is found to have a linear relationship with the applied activation amplitude. The dissociation kinetics of LE are found to be greatly affected by pressure in the mass spectrometer, showing faster dissociation at lower pressures. The effects of other experimental parameters, including the temperature of the inlet capillary and sensitivity to the frequency of the activation waveform, are also explored. Calibration of Teff as a function of activation waveform will provide a way to obtain Arrhenius activation parameters (activation energy and frequency factor) for other biological
molecules and lead to better understand of their intrinsic properties.
General Chemistry I - CHEM 181Critical Thinking Exercise.docxbudbarber38650
General Chemistry I - CHEM 181
Critical Thinking Exercise #3
Due Thursday, Oct. 24
Name_________________________
Section _______
Why do excited hydrogen atoms emit only specific wavelengths of light?
Introduction
In the 1800’s scientists discovered that a glass cylinder containing a low pressure of a gas will emit light when high voltage electricity is applied to metal electrodes inserted at opposite ends of the cylinder. This principal is used in fluorescent lighting today. When the light emitted by a particular gas, for instance hydrogen, was analyzed by passing it through a prism, scientists were surprised to find that only a few specific wavelengths of visible light were emitted, rather than a continuous range of wavelengths. This mystery took over 70 years to fully solve.
wavelength, (nm)
Infrared
Ultraviolet (uv)
Over time, scientists discovered that the wavelengths of radiation emitted by hydrogen extended from the ultraviolet through the visible into the infrared, microwave, and radio wave portions of the electromagnetic (EM) spectrum. There appeared to be a pattern in the wavelengths that consisted of a series of series of lines. The first 4 series starting from the shortest wavelength line are named for the people that discovered them.
In 1885 J.J. Balmer discovered a mathematical pattern in the wavelengths emitted by hydrogen in the visible and near ultraviolet regions of the electromagnetic spectrum:
Each allowed value for n plugged into this equation produces one of the wavelengths of light emitted by hydrogen in the region of the spectrum that Balmer studied.
Five years later another scientist, Johannes Rydberg, extended this equation so that it could predict all of the wavelengths emitted by hydrogen in all regions of the electromagnetic spectrum:
(eq. 1)
This equation contains two integers that must be greater than zero and the value of n must be greater than the value of m. The way it works is that the value of m specifies the series, e.g. m = 3 is necessary to generate the wavelengths observed in the Paschen series and n = 4,5,6… will generate the wavelengths emitted within that series. The constant R is known as the Rydberg constant.
Though the equations from Balmer and Rydberg demonstrated mathematical skill, they did not answer the big question on the minds of many scientists: Why do the atoms of hydrogen in the gas phase emit only certain wavelengths of radiation and why do the wavelengths have the pattern described by these clever equations. As it turned out, the solution to this riddle completely altered civilization on this planet.
Part I – Putting together pieces of the puzzle
Part of the reason that it took so long to solve hydrogen line spectrum puzzle was that scientists at the time had an incomplete understanding of light. Specifically, they were not aware of any relationship between the energy of light and the wavelength. It was assumed that the ene.
Design of Non-Uniform Linear Antenna Arrays Using Dolph- Chebyshev and Binomi...IJERA Editor
This paper explores the analytical methods of synthesizing linear antenna arrays. The synthesis employed is
based on non-uniform methods. In particular, the Dolph-Chebyshev and binomial methods are used, so as to
improve the directivity of the array and to reduce the level of the secondary lobes by adjusting the geometrical
and electric parameters of the array. The radiation patterns, the directivity, and the array factors of the uniform
and the non-uniform methods are presented. It is shown that the Chebyshev arrays have better directivity than
binomial arrays for the same number of elements and separation distance, while binomial arrays have very low
side lobes compared with Chebyshev and uniform excitation arrays. Finally, numerical results of both methods
are analyzed and compared.
Fluorescence quenching of 5-methyl-2-phenylindole (MPI) by carbon tetrachlori...IOSR Journals
The fluorescence quenching of 5-methyl-2-phenylindole (MPI) by carbon tetrachloride by steady state in different solvents, and by transient method in benzene has been carried out at room temperature. The Stern–Volmer (SV) plot has been found to be non-linear with a positive deviation for all the solvents studied. In order to interpret these results we have invoked the ground state complex and sphere of action static quenching models. Using these models various rate parameters have been determined. The magnitudes of these parameters imply that sphere of action static quenching model agrees well with the experimental results. Hence the positive deviation in the SV plots is attributed to the static and dynamic quenching. Further, from the studies of temperature dependence of rate parameters and lifetime measurements, it could be explained that the positive deviation is due to the presence of a small static quenching component in the overall dynamic quenching. With the use of finite sink approximation model, it was possible to check whether these bimolecular reactions as diffusion limited and to estimate independently distance parameter R′ and mutual diffusion coefficient D. Finally an effort has been made to correlate the values of R′ and D with the values of the encounter distance R and the mutual diffusion coefficient D determined using the Edward's empirical relation and Stokes–Einstein relation.
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
Experimental Study of an Atmospheric Pressure Dielectric Barrier Discharge an...IJERA Editor
A homogeneous dielectric barrier discharge (DBD) in argon was produced by applying high voltage A.C. source of potential difference (0-20) kV operating at a frequency of 10-30 kHz across two parallel plate electrodes with glass as dielectric barrier. The discharge was characterized by optical emission spectroscopy (OES) and electrical measurement. Four argon emission lines from the discharge were analyzed and the electron temperature was estimated by line intensity ratio method. The electron density in the discharge was estimated by power balance method. An investigation of the effect of inter-electrode distance on the electron density was made. The results showed that the electron temperature is less than 1 eV and the electron density is of the order of 1011cm-3 which varied with the inter electrode distance. Discharge was applied for surface modification of polyethylene terepthalate (PET). Modified surfaces were studied by contact angle measurement and FTIR spectroscopy.
Experimental Study of an Atmospheric Pressure Dielectric Barrier Discharge an...IJERA Editor
A homogeneous dielectric barrier discharge (DBD) in argon was produced by applying high voltage A.C. source of potential difference (0-20) kV operating at a frequency of 10-30 kHz across two parallel plate electrodes with glass as dielectric barrier. The discharge was characterized by optical emission spectroscopy (OES) and electrical measurement. Four argon emission lines from the discharge were analyzed and the electron temperature was estimated by line intensity ratio method. The electron density in the discharge was estimated by power balance method. An investigation of the effect of inter-electrode distance on the electron density was made. The results showed that the electron temperature is less than 1 eV and the electron density is of the order of 1011cm-3 which varied with the inter electrode distance. Discharge was applied for surface modification of polyethylene terepthalate (PET). Modified surfaces were studied by contact angle measurement and FTIR spectroscopy.
A brief information about the SCOP protein database used in bioinformatics.
The Structural Classification of Proteins (SCOP) database is a comprehensive and authoritative resource for the structural and evolutionary relationships of proteins. It provides a detailed and curated classification of protein structures, grouping them into families, superfamilies, and folds based on their structural and sequence similarities.
This pdf is about the Schizophrenia.
For more details visit on YouTube; @SELF-EXPLANATORY;
https://www.youtube.com/channel/UCAiarMZDNhe1A3Rnpr_WkzA/videos
Thanks...!
Introduction:
RNA interference (RNAi) or Post-Transcriptional Gene Silencing (PTGS) is an important biological process for modulating eukaryotic gene expression.
It is highly conserved process of posttranscriptional gene silencing by which double stranded RNA (dsRNA) causes sequence-specific degradation of mRNA sequences.
dsRNA-induced gene silencing (RNAi) is reported in a wide range of eukaryotes ranging from worms, insects, mammals and plants.
This process mediates resistance to both endogenous parasitic and exogenous pathogenic nucleic acids, and regulates the expression of protein-coding genes.
What are small ncRNAs?
micro RNA (miRNA)
short interfering RNA (siRNA)
Properties of small non-coding RNA:
Involved in silencing mRNA transcripts.
Called “small” because they are usually only about 21-24 nucleotides long.
Synthesized by first cutting up longer precursor sequences (like the 61nt one that Lee discovered).
Silence an mRNA by base pairing with some sequence on the mRNA.
Discovery of siRNA?
The first small RNA:
In 1993 Rosalind Lee (Victor Ambros lab) was studying a non- coding gene in C. elegans, lin-4, that was involved in silencing of another gene, lin-14, at the appropriate time in the
development of the worm C. elegans.
Two small transcripts of lin-4 (22nt and 61nt) were found to be complementary to a sequence in the 3' UTR of lin-14.
Because lin-4 encoded no protein, she deduced that it must be these transcripts that are causing the silencing by RNA-RNA interactions.
Types of RNAi ( non coding RNA)
MiRNA
Length (23-25 nt)
Trans acting
Binds with target MRNA in mismatch
Translation inhibition
Si RNA
Length 21 nt.
Cis acting
Bind with target Mrna in perfect complementary sequence
Piwi-RNA
Length ; 25 to 36 nt.
Expressed in Germ Cells
Regulates trnasposomes activity
MECHANISM OF RNAI:
First the double-stranded RNA teams up with a protein complex named Dicer, which cuts the long RNA into short pieces.
Then another protein complex called RISC (RNA-induced silencing complex) discards one of the two RNA strands.
The RISC-docked, single-stranded RNA then pairs with the homologous mRNA and destroys it.
THE RISC COMPLEX:
RISC is large(>500kD) RNA multi- protein Binding complex which triggers MRNA degradation in response to MRNA
Unwinding of double stranded Si RNA by ATP independent Helicase
Active component of RISC is Ago proteins( ENDONUCLEASE) which cleave target MRNA.
DICER: endonuclease (RNase Family III)
Argonaute: Central Component of the RNA-Induced Silencing Complex (RISC)
One strand of the dsRNA produced by Dicer is retained in the RISC complex in association with Argonaute
ARGONAUTE PROTEIN :
1.PAZ(PIWI/Argonaute/ Zwille)- Recognition of target MRNA
2.PIWI (p-element induced wimpy Testis)- breaks Phosphodiester bond of mRNA.)RNAse H activity.
MiRNA:
The Double-stranded RNAs are naturally produced in eukaryotic cells during development, and they have a key role in regulating gene expression .
Earliest Galaxies in the JADES Origins Field: Luminosity Function and Cosmic ...Sérgio Sacani
We characterize the earliest galaxy population in the JADES Origins Field (JOF), the deepest
imaging field observed with JWST. We make use of the ancillary Hubble optical images (5 filters
spanning 0.4−0.9µm) and novel JWST images with 14 filters spanning 0.8−5µm, including 7 mediumband filters, and reaching total exposure times of up to 46 hours per filter. We combine all our data
at > 2.3µm to construct an ultradeep image, reaching as deep as ≈ 31.4 AB mag in the stack and
30.3-31.0 AB mag (5σ, r = 0.1” circular aperture) in individual filters. We measure photometric
redshifts and use robust selection criteria to identify a sample of eight galaxy candidates at redshifts
z = 11.5 − 15. These objects show compact half-light radii of R1/2 ∼ 50 − 200pc, stellar masses of
M⋆ ∼ 107−108M⊙, and star-formation rates of SFR ∼ 0.1−1 M⊙ yr−1
. Our search finds no candidates
at 15 < z < 20, placing upper limits at these redshifts. We develop a forward modeling approach to
infer the properties of the evolving luminosity function without binning in redshift or luminosity that
marginalizes over the photometric redshift uncertainty of our candidate galaxies and incorporates the
impact of non-detections. We find a z = 12 luminosity function in good agreement with prior results,
and that the luminosity function normalization and UV luminosity density decline by a factor of ∼ 2.5
from z = 12 to z = 14. We discuss the possible implications of our results in the context of theoretical
models for evolution of the dark matter halo mass function.
Observation of Io’s Resurfacing via Plume Deposition Using Ground-based Adapt...Sérgio Sacani
Since volcanic activity was first discovered on Io from Voyager images in 1979, changes
on Io’s surface have been monitored from both spacecraft and ground-based telescopes.
Here, we present the highest spatial resolution images of Io ever obtained from a groundbased telescope. These images, acquired by the SHARK-VIS instrument on the Large
Binocular Telescope, show evidence of a major resurfacing event on Io’s trailing hemisphere. When compared to the most recent spacecraft images, the SHARK-VIS images
show that a plume deposit from a powerful eruption at Pillan Patera has covered part
of the long-lived Pele plume deposit. Although this type of resurfacing event may be common on Io, few have been detected due to the rarity of spacecraft visits and the previously low spatial resolution available from Earth-based telescopes. The SHARK-VIS instrument ushers in a new era of high resolution imaging of Io’s surface using adaptive
optics at visible wavelengths.
Observation of Io’s Resurfacing via Plume Deposition Using Ground-based Adapt...
Consequencies of the new intensity formula in many optical spectroscopy fields
1. IOSR Journal of Applied Physics (IOSR-JAP)
e-ISSN: 2278-4861.Volume 5, Issue 1 (Nov. - Dec. 2013), PP 29-43
www.iosrjournals.org
www.iosrjournals.org 29 | Page
Consequencies of the new intensity formula in many optical
spectroscopy fields
Bo Thelin
Solarphotonics HB Granitvägen 12B 75243 Uppsala Sweden
Abstract: This paper is an extended review paper about the use of a new intensity formula in optical emission
spectroscopy, atmospheric physics and astronomy. The laboratory data of atomic- and ionic spectra from
different light sources do support the new formula. In the atmospheric field dominant light mechanisms in
aurora have been revealed, which follow the new formula. The inverse of this formula can also be used to show
the photoelectric effect for many elements.
In astronomy new methods have been developed of determining electron- and effective temperature,
density and mass of stars with the new formula as a basis, which are in accordance with literature values. An
investigation of the Balmer lines in the sun shows that they do follow the new formula. Therefore the new
formula is important in the sun and the stars.
Keywords: Optical emission spectroscopy, Analytical Chemistry, Light sources, Spectral tables UV-IR,
Atmospheric emissions, Auroral spectroscopy, Astrophysics, Linear relationships, Photoelectric effect, Star
temperature determinations, Star density determinations and Star mass determinations.
I. Introduction
The work to be presented in this paper is an extended review paper from many papers in the literature
concerning a new intensity formula in optical emission spectroscopy. It originates from a certain discovery
made by the author and Dr.Sten Yngström during the 1980s, while working with auroral spectroscopy at the
Swedish Institute of Space Physics in Kiruna. The data of interest were achieved by using a new computerized,
extremely versatile photon counting spectrometer system (IDES), which was suited for the study of intensities
of spectral lines.
According to a new theory by S.Yngström Ref 1 , which was created during the 1980s, the intensity I is given
I = C λ-2
( e x p (- J/ k T )) / ( e x p ( h ν /k T) – 1 ) (1)
J is here the ionization energy, and C is a factor given by transition probabilities, number densities and sample
properties. λ and ν are here the wavelength and frequency of the atomic spectral line. This means that the new
intensity formula consists of 4 parts : the C-factor, λ-2
-part, the J-dependence exp(-J / k T) and the Planck factor
1/(( exp( h ν / k T ) - 1).
Myself and my collegue Dr.Sten Yngström have earlier presented a big number of papers in the
past about this formula. We have developed three methods of analyses : the fluctuation method, the absolute
intensity method and the detection limit method, which all support the new intensity formula in equation 1.
Two summary papers Refs 2 and 3 about this project have earlier been published in open access journals
together with many other papers in these fields. This means that they contribute to a strong evidence from the
literature about this new intensity formula. It is common in the literature to find papers and data from
investigations in the past supporting the new intensity formula.
In this very paper the same kind of studies about the absolute intensities will be presented for
ionic spectra, which earlier were performed on atomic spectra. A new intensity formula for ions has also been
presented. Ionic studies were also performed for C,O and Ne-ions, where a new recursion formula was presented
in Ref 4.
The internal electron temperature was also determined in relation to the ionization energies. Intensity studies
were also done in the ICP- plasma, where the internal electron temperature was studied at different heights in
the plasma supporting the new intensity formula.
Studies from the LED-and fluorescens experiments at room temperature were also discussed in relation to the
Planck profile of the new formula.
Breakdown- and X-ray experiments have also been discussed in relation to the new formula.and new formulas
for these experiments were also presented.
The photoelectric effect has also been studied, giving a new formula for this effect by using the inverse of the
new intensity formula. This was studied for many different elements and the alkali metals.
In the nature the new formula was studied with the fluctuation method on Ba-ions released from explosions in
the upper atmosphere by using rockets. Spectrophotometers on the ground were detected the light from these
2. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 30 | Page
explosions. In these investigations airglow and auroral emissions were also measured on ground measurements
with spectrophotometer, where the optical emission mechanism was studied.
The stellar measurements here were based on the linear relationship found between spectrophotometer data of
stars, used earlier with the absolute intensity method on at atomic-and ionic laboratory data. From these
measurements it was possible to determine electron –and effective temperature, density and mass of stars in
accordance with literature data. The Balmer spectral lines were also studied with the new formula.
II. Laboratory experiments supporting the new formula
2a The fluctuation method
The first method which was developed supporting the intensity formula with an exponential
(J+hν) term is the fluctuation method. This method concerns the study of spectral line intensity ratio fluctuations
in Refs ( 5 - 10 ), where many different optical light sources were used. By forming the ratio between the
intensities of two simultaneously measured lines from the same sample and by using logarithmic differentiation,
we obtain the following expression
d ( Ia
mn / I b
kl) / ( Ia
mn / Ib
kl ) = d ( Ca
mn / Cb
kl ) / ( Ca
mn / Cb
kl ) + ( 1 /k T )( d T / T ) D ( E ) ( 2 )
where D ( E ) =Ja
– Jb
+ h νa
mn - h νb
kl and d ( Ia
mn / I b
kl) / ( Ia
mn / Ib
kl ) is named R value. Mathematically this
formula is a straight line, which can be seen in Fig ( 1 ) from a hollow cathode experiment. In this figure
fluctuation data R versus D(E)= Ja
– Jb
+ h νa
mn - h νb
kl. (difference of ionization energy plus photon energy)
were used from fifteen steel samples in a hollow cathode lamp. Seventeen elements were studied in this graph
giving a correlation coefficient of 0.90 .
FIG 1 Plot of fluctuation data R versus D (E) = Ja
- Jb
+ h νa
mn - h νb
kl. (difference of ionization energy
plus photon energy) from fifteen steel samples used in a hollow cathode lamp. Seventeen elements were studied
in this graph. ( Reproduction from Ref 10 )
2b The absolute intensity method
Atomic spectra
A summary of this second method is presented here and concerns about studying absolute
intensity of spectral lines. This method has been presented in several papers earlier Refs 10, 11 and 12). In this
very paper this method uses spectral tables from NBS as a basis. According to this method it has shown to be
possible to obtain linear relationships by studying the logarithmic expression :
ln ( I λ2
) = -(hν/kT)( 1 + (kT/hν)ln (1- exp( -hν/kT))) ( 3 )
which was developed from equation 1. This investigation was based on NBS intensity tables on arc
measurementsRef 13 and 14 . The points in this graph represent the mean values of many spectral lines in a
small wavelength interval. A graph like this is shown in Fig 2 ,which is a graph of C(I)(atoms) and shows
linearity over 14 eV, which is a nice result with a correlation coefficient r = -0.97 and shows that the carbon
atoms do to follow this formula.
In this method ln ( I λ2
) was plotted versus hν ( 1+θ/hν ln(1-exp(-hν/θ))) eV for 17 atomic elements. Each
intensity value here is the mean value of many individual values. By forming the maximum between the
difference between ln I λ2
and ln λ2
the following formula will be the basic equation in this method of analysis.
ln ( Imax λ2
max) = const. - 1.6 J / hνmax ( 4 )
This graph is seen in Fig 3, where ln ( Imax λ2
max ) has been plotted versus 1.6 J / hνmax
= J /θ for 17 elements, where θ = k Te (electron temperature). J denotes table value of ionization energy. This
graph forms a good linear relationship, where hνmax = 1.6 θ. This means that this graph is a strong support of the
new intensity formula, based on the new theory. It is also possible to measure the internal electron
temperature(around 2eV) for different elements, which is shown in Table 1. These values of the electron
temperature are supported by secondary electron temperature values from the literature in Ref 15.
3. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 31 | Page
FIG 2 l n ( I λ2
) plotted against h ν( 1 + (k T/h ν) l n( 1 – exp(-h ν/k T)) e V for carbon C ( I ) data. Intensity
data from intensity tables were used. (Reproduction from Ref 11 )
Table 1
Element J (eV) θ (eV)
Cs 3.89 1.6
Na 5.14 1.9
Ba 5.20 1.8
Li 5.39 1.8
Ca 6.11 2.1
Yb 6.25 2.1
Sc 6.70 2.1
Cr 6.76 2.3
Ti 6.83 2.1
Sn 7.33 2.1
Mo 7.38 2.3
Mn 7.43 2.3
Ag 7.57 2.1
Ni 7.63 2.1
Fe 7.86 2.1
Co 7.88 2.2
Pt 9.0 2.1
Fig 3 ln (Imax λ2
max) plotted versus (1.6 J ) / hνmax for seventeen elements from the NBS tables in ( 13 )
and (14) ( Reproduction from Ref 10 )
2c The method of ionic spectra
The intensity formula for ions has a similar appearance as equation 1 and is shown in equation 5
.( Refs 4, 17 and 18 ) This formula include ionization energies for the first and second ionization energy, which
has been proposed earlier in the detection limit method Ref 16. C is a factor given by transition probabilities,
number densities and sample properties. λ and ν are here the wavelength and frequency of the ionic spectral line.
The ionic intensity formula has the following appearance :
I = C λ-2
( e x p (- (J1+J2)/ k T )) / ( e x p ( h ν /k T) – 1 ) ( 5 )
To show the validity of equation 5 with the short version of this method ln ( I λ2
) was plotted versus hν (
1+θ/hν ln(1-exp(-hν/θ))) eV for CII and is shown in Fig 4 and is similar to the graph of CI in Fig 2. Similar
graphs were also obtained for OI,OII , NeI and NeII,which gave linear graphs(r=-0.98 for OI and r=-0.95 for
4. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 32 | Page
OII and r=-0.98 for NeI and r=-0.99 for NeII). From these graphs ln ( Imax λ2
max ) was plotted versus 1.6 ( J1+J2)
/ hνmax = (J1+J2)/θ in the same way as for atoms which is seen above. The points will follow an expression in
equation 6 for ions which is similar to equation 4 for atoms.
ln ( Imax λ2
max) = const. - 1.6 (J1+J2) / hνmax ( 6 )
Equation 5 includes ionization energies for the first and second ionization energy.
These values fit well with secondary electron temperature values from the literature Ref 15.
A similar plot to Fig 3 for atoms has also been done for ions of 11 elements, which is seen in Fig 5. The
electron temperatures are about 4 eV for ions which fit well with energy distributions of secondary electrons
from different experiments in the literature
.
FIG 4 ln ( I λ2
) plotted against hν( 1 + (kT/hν) ln( 1 – exp(-hν/kT)) eV for carbon C ( I I ) ions. Intensity
data from intensity tables were used. ( Reproduction from Ref 4 )
Fig 5 ln (Imax λ2
max) plotted versus (1.6 (J1 +J2) ) / hνmax for eleven ionic elements from the NBS tables. (
Reproduction from Ref 4 )
2d. This method of spectra of ions with higher ionization energies
The intensity formula for the ions with higher ionization energies follow similar linear relationships as
Figs 2 and 4. These can be seen for oxygen in Fig 6 for, OV and OVI with very good correlations in Ref 4. The
variance of the slopes of the lines depend of the difference of the electron temperatures between the graphs. The
higher ionization energy the lower slope.
The new intensity formula for ionic line spectra can be approximately written for ions of the (r+1) : th stage :
Ir+1 α Nr+1 exp (-( Jr+1 + hν ) / kT) = Nr exp ( - Jr / kT ) exp (-( Jr+1 + hν ) / kT)
(7)
In this way it seems to be possible to build up an approximate recursion formula of the k : th
stage : Ik α N1 exp ( - ( ∑ ( Jr )r=1
r=k
+ hν ) /kT ) (8)
Therefore a complete recursion formula for the ionic spectra could be written similar to equation 1 for atomic
spectra.
5. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 33 | Page
Fig 6 l n ( I λ2
) plotted against h ν( 1 + (θ/h ν) l n( 1 – exp(-h ν/θ)) e V for oxygen O V and OVI data (ions).
Intensity data from intensity tables were used. ( Reproduction from Ref 4 )
2e The detection limit method
A third method of analysis has been developed concerning the detection limits of ionic spectral lines in
an inductively coupled plasma experiment Ref 16. A table of transition probabilities of spectral lines in an arc
experiment was used in this work. The results from that analysis of detection limit data are very consistent with
the new spectral line expression of equation 1. In this paper a method was developed to calculate transition
probability rates from established tables according to the new theory of spectral line intensities.
2f. Inductively coupled plasma ICP
In a paper by Blades et al in Ref 19 an ICP- temperature investigation was carried out for different
elements on different heights (H) of the ICP-plasma. A straight line was obtained , where the heights of
different spectral lines(peak values) from different elements were plotted versus the normal temperature.
According to this graph the I(max) from these lines are inversely proportional to the heights(H) of the lines.
From that graph(Fig 19, p.861) in this reference) it is possible to plot the height versus (J + h ν), which is linear
and shows a direct proportionality between height and (J +hν) and is shown in Fig 7. Because I(max) is
inversely proportional to H , means that I(max) is inversely proportional to (J + h ν ) which is in accordance to
the equation 1. Refs 2 and 3.
FIG 7 This graph shows a linear relationship between height (H) in the ICP – plasma and J + hν for different
elements studied. ( Reproduction from Ref 2 )
2g. LED lamps , Photoluminiscence and Electroluminiscence
Planck factor in the formula is also strongly supported by the intensity profile I = f ( λ ) of the LED-
lamps .These lamps are working at low temperature as in Ref 20 (Fig 3 and 4, p.5087) and Ref 21 (Fig
6b,p.8267). These curves were coming from experiments in room temperature and far below(26-200K) from
photoluminisscence FL-experiments. These two references constitute good examples of the fact that emissions
coming from low temperature light sources show Planck factor profiles coming from discrete emissions. The
reason for this is the fact that the temperature is here too low to emit continuous radiation. These observations
agree well with the ideas of this paper, where the Planck profile from the discrete emission lines is clearly seen
here.
In many electroluminescence papers like Ref 22 the envelope of these emission peaks seems to follow a Planck
factor profile according to equation 1. The deep minima between the emission peaks, show that the emissions
are mostly coming from discrete emissions and not from continuous emissions. Therefore the Planck factor
profile here seems to originate from equation 1 for discrete emissions.
6. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 34 | Page
2g. Breakdown experiment with laser
In Fig 9.9 ,p.737 of Ref 23 the breakdown pressure is plotted versus ionization energy for some atomic
and molecular gases. In this investigation the laser power was fixed. The C-factor includes the number densities
of a gas, which means the pressure in this experiment. In this experiment the pressure is proportional to the
ionization energy. This fact is in accordance to equation 1 because the C-factor can be expressed as
approximately
C = I λ2
e x p (( J + h ν) / k T ) (9)
as a breakdown formula Ref 3.
2h. X-ray experiments
This dependence has been studied earlier Ref 24 (Fig 2-9,p.93) and Ref 25 (Fig 12, p.349) in the X-ray field,
where
I ( λ ) = const λ-2
(10)
for the X-ray emissions. In this wavelength region the hν-value is very big which makes the Planck factor
around 1. If k T ≈ h ν ,then equation 10 is achieved from equation 1.For a specific element this expression is in
accordance with equation 1 as an X-ray formula Ref 3.
2i The photoelectric effect
In this section new results about the photoelectric effect have been obtained by using the new intensity
formula in optical emission spectroscopy. By using the inverted form of this formula good correlation between
the current and frequency has been obtained from photoelectric experiments at different field strengths. At
photoelectric and thermionic experiments from different elements the importance of the ionization energy in the
photoelectric effect has been demonstrated.
As this intensity formula deals with number of emitting photons from a plasma, it has also shown to be
possible to use it on the reverse process, where incoming photons emit electrons into a current. An experimental
proof of that have been shown earlier by the author in Ref 26. A resume of this paper is shown here.
A fact which is important in this very paper about the photoelectric effect is a relationship between
current and frequency. The usual appearance from the literature of this experimental relationship is
an i = eν
-structure , where the current (y-axis) is an exponential function of the frequency(x-axis),
and starts from the ν0 (threshold) a bit in on the ν-axis. This experimental fact is what the different
theories have tried to fit, with some difficulties according to their own opinions.
By using the approximate form of equation 1, we can express the C-factor as approximately
C = I 𝛌 𝟐
exp (( J + hν ) / kTe ) (11)
where a very good fit could be obtained as a new photoelectric formula. The C-factor is here proportional to the
current in the photoelectrical effect. Such a nice fit can be seen in Fig 8, from a photoelectrical experiment with
potassium at different field strengths. In this fit, current ratios have been calculated according to equation 11
where the current i α C .In this way only the ν-dependence of the C-factor(current) appeared more clearly. This
data were coming from Fig 3-46 p.111 of Ref 27 and is demonstrating the influence of electric field on the
photoelectric threshold of thin layers of potassium on tungsten.
This data current ratios were then calculated from the data and compared with the current from equation 11.
This can be seen in equation 12.
ik / ik-1 = ( exp ( hνk/kTe) – 1 )( hνk-1)2
/ ( exp ( hνk-1 /kTe) – 1 ) (hνk)2
≈ (νk-1/νk )2
exp ( h/kTe ( νk – νk-1 )) (12)
Nice correlation between experimental and theoretical values were obtained at two different field strengths ( A
and B ) in these experiments.
Fig 8 The ν- dependence of the photocurrent ratios between literature experiment(circles) and the new theory
(squares)(inversed intensity formula) Results at different electron energies are shown. ( Reproduction from
Ref 26 )
7. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 35 | Page
The influence of the J-term of equation 11 on the photoelectric effect, has also been seen in several ways. In
Table 3-2 p.75-76 of Ref 27 photoelectric and thermionic work functions of different elements have been
studied. This table has been used in Fig 9, where the ionization energies(J) have been plotted versus the
threshold wavelengths of that table. Here is it possible to study the photoelectric effect of different elements. Fig
9 is similar to Fig 8 if i α C α J according to equation 11 but include information from 22 different elements.
Fig 9 is a clear evidence of J-dependence of the photoelectric effect, where the slope of the curve increases with
higher ( J + h ν)- values according to equations 13 and 11.
According to equation 13 J α i (current) which means that Fig 9 shows the usual eν
–dependence between the
current and frequency as in Fig 8.
If we express J as a function of λ from equation 11 we obtain :
J = f (λ0) = k Te ln (𝐂/𝐈 λ2
) - hc /λ (13)
Another way to show that equation 11 seems to be important here, is the use Table 12-1,p.423 and Fig 12-8,
p.424 in Ref 27 for the alkali metals. These results are shown in Fig 10 and seem to be similar to Fig 9 with the
same kind of structure. In these experiments with the alkali metals the sample was well prepared and the
equipment was well outgased to obtain good results.
Fig 9 The influence of the ionization energy J versus the threshold wavelengths of the photoelectric effect. 22
different elements(metals) have been studied. ( Reproduction from Ref 26 )
Fig 10 The influence of the ionization energy J versus the threshold wavelengths of the photoelectric effect. The
alkali metals have been studied. ( Reproduction from Ref 26 )
8. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 36 | Page
III. Atmospheric- and ionosperic emissions
In this paper observational results about wave number dependent spectral line ratio fluctuations in the
atmospheric emissions are reported. Linear relationships were obtained when spectral line ratio fluctuations (R-
values) were plotted vs. the differencies in photon energies D(E)-values when studying Ba-release Fig 11,
nightglow and auroral emissions. The data used was coming from ground based spectrophotometer
measurements. In the Ba-release experiment reported here a 0.5 m Ebert spectrophotometer was registrating two
Ba-release explosions from ground at a site at the John Hopkin University. The Ba explosives were sent up by a
Javelin sounding rocket from Wallops Islands Ref 29. The emission spectra of the Ba release from the
explosions were recorded in the wavelength region 3490 – 6490 Å. from the ground. The data from these
measurements has been used by the author with fluctuation analysis(RD-analysis) Ref 28.
In the auroral investigation a spectrophotometer SPI was used, with photoelectric registration and a
photomultiplier tube. With this spectrophotometer system it is possible to choose especially interesting spectral
ranges. The spectral range studies was 4200-6400 Å Ref 31. The author has done similar measurements of
auroral emissions at the same wavelength range at the Institute of Space Physics in Lycksele ( Ref 30 ).
By doing such studies of auroral light it is possible to see the importance of the inelastic scattering cross section
between electrons – atoms and electrons – molecules. In this way it has found to be possible to determine the
mean energy of the interacting thermal electrons which are active in the different auroral phases.
This paper demonstrates that the fluctuation method( RD-graphs) from the new intensity formula seems
to reveal interesting auroral results about de-excitation mechanisms. However, this electron loss process due to
the excitation of rotational and vibrational states of molecules and electronic states of atoms, is an important
cooling process in the ionosphere. This work also show that the new intensity formula seem to be valid in the
atmospheric field too.
Fig 11 Fluctuation graph (RD-graph) from the Ba-release experiment ( 5 - 50 s after the explosion).
(Correlation r = 0.84 ) (Reproduction from Ref 28)
IV Stellar spectral emissions
This section is a summary of stellar measurements and analysis done by the author on data from Ref
32. These stellar optical spectra extend over the spectral classes O – M and the photometrically well-calibrated
luminosity measurements from star to star. Good temperature and luminosity coverage have been achieved. The
data were digitalized from the main sequence classed O5 – F0 and F6 – K5 displayed in term of relative flux as
a function of wavelength. The parameters that have been measured in this investigation are maximum
luminosity Lmax(Rel.fluxmax) of the Planck curve. In this maximum the wavelength λmax and the maximum
frequency νmax were also measured.
The ln (Lmax λmax
2
) values were then plotted versus (1.6 Jmeanvalue / hνmax) where Jmeanvalue is the mean value of
the ionization energies of the elements of the stars measured. To obtain a similar linear relationship for the
stellar data as in Fig 3 from the spectroscopical method from Refs 10 and 11, the following luminosity data from
Ref 32 and data from Table 2 were used and plotted according to equation 14
ln ( Lmax λmax
2
) = const – (1.6 Jmeanvalue/ hνmax) (14)
which is similar to equation 4 for atoms.
To receive the data of Table 2 it is necessary to use a two step procedure. In the first step it is necessary to
define the graph by calculating the Jmeanvalue of the G2-star. The Jmeanvalue can be
expressed in the following way :
Jmeanvalue = ∑ cn Jn (15)
The cn is the normalized content of an element of a star. We consider the content values of G2-stars to be similar
to the content values of the sun. Therefore the cn-values of the sun have been used here. Jn is here the ionization
energy of an element of a star. This Jmeanvalue has been calculated for the sun (G2 star), which gave Jmeanvalue =
16.2 eV according to the linear graph in Fig 12. This value is 16.2 eV, for the sun when using equation 14
9. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 37 | Page
together with established chemical composition values of the sun. This means that we now have one point
determined in Fig 12. A more detailed description of this analysis method of creating Fig 12 and Table 2 is
described in Refs( 33, 34, 35 and 18 ).
The data in Fig 12 constitute a straight line in the classes O5 – F0 and F6 – K5 and is in accordance with the
usual HR-diagram.
In equations 4 and 14 hνmax = 1.6 θ, where θ = internal electron temperature in eV. This means that the classes
O5 – F0 have higher temperature than the classes F6 – K5, which is also in accordance with the usual HR-
diagram. For example a G2 star (the sun) has θ = 1.56 eV (Te = 18110 K).
Table 2
Determination of the electron temperature of the stars from different spectral classes
Spectral class θ (eV) Jmeanvalue (eV)
K5V 1.44 15.5
K4V 1.47 15.6
G9-K0 1.50 15.8
G6-G8 1.53 16.0
G1-G2 1.56 16.2
F8-F9V 1.63 16.7
F6-F7V 1.63 16.5
------------------------------------------------------------------------
A9-F0V 1.72 16.9
A8 1.75 17.1
A5-A7 1.81 17.5
A1-A3 1.84 17.6
B6V 1.88 17.8
B3-B4V 1.94 18.0
O7-B0V 1.97 18.1
O5V 2.00 18.2
Fig 12 ln ( Lmax λ2
max) plotted versus (1.6 Jmeanvalue) / hνmax for different stars from spectral classes O –
M ( Reproduction from Ref 33 )
4b. The use of the Balmer lines
In the paper Ref 32 it is shown in the that the intensity maximum of the continuous-and discrete spectra
of stars seem to be the same, where the hydrogen Balmer absorption lines of different stars have been studied.
These are the well known Planck curves with steep low wavelength side and a slow high wavelength side. The
wavelength of the intensity maximum of continuous-and discrete spectrum seems to be the same. This in
agreement with equation 1 and the new theory, where the Planck factor is a part of the new intensity formula.
This is clearly seen in Fig 13 from the spectrum of two A-stars. The normalized flux is here proportional to the
emissions from the continuous-and discrete spectrum. These curves show very good examples of Planck curves,
where continuous-and discrete emissions seem to have the same wavelength maximum.
The wavelengths of the Balmer lines are shown in Table 3. By using equation 14 and Table 2 intensity ratios
have been determined theoretically(from intensity formula) and experimentally by using the data of Ref 32 ,
from different spectral classes of stars. At the use of these intensity ratios JH = 13.595 eV for hydrogen was
used. The electron tem-
10. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 38 | Page
peratures for different spectral classes have earlier been determined in Tab 5 from Ref 33 . A summary of the
values from the spectral classes of this paper is shown in Table 5. Nice correlation (r=0.98 ) has been achieved
between theoretical-and experimental intensity ratios.
This is shown in Fig 14 by the author and is, together with Fig 13 , a strong evidence of the fact
that stars follow the new intensity formula, as atoms and ions do. Fig 14 shows very nice correlation between
experiment and theory Refs 34, 35 and 36.
Table 3
Balmer lines used
Hα 6562.80 Å
Hβ 4861.32 Å
Hγ 4340.46 Å
Hδ 4101.73 Å
Hε 3970.07 Å
Fig 13 Plot of normalized flux versus the wavelength(Planck curve) for two different A-stars.
The absorption hydrogen Balmer lines are clearly observed. The wavelength of the intensity maxima for
both continuous and discrete emissions seems to be the same.
( Reproduction from Ref 34 )
Fig 14 Spectral intensity ratios (experimental and theoretical) give very good correlation(r=0.98) using
the Balmer lines from different spectral classes of stars using the new intensity formula. Spectral classes
used : A8=unfilled circles , A5-A7=unfilled squares, A1-A3=unfilled triangles, B6V= filled circles, B3-
B4=filled squares. ( Reproduction from Ref 34 )
4c. Determination of the effective temperature of a star
In this section Table (66 ) p.564 in Ref 37 were then used, where the effective temperatures were tabled
from many main sequence stars from different spectral classes (A-K).These effective temperature values were
then plotted versus the electron temperature values from corresponding spectral class from Table 4 in this paper.
This means that effective temperature values have been obtained for 12 main sequence stars and are tabled in
Table 4.
Very nice correlation (+- 85 K) is here obtained between the values from this investigation and the
literature values based on the Stefan-Boltzmann temperature law and can be seen in Table 4 and Fig 15, which
show good correlation (r=0.99) Refs 34 and 36.
11. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 39 | Page
Fig 15 Effective temperature plotted versus electron temperature for a number of main sequence
stars.(correlation r= 0.99) ( Reproduction from Ref 34 )
Table 4
Determination of Teffective of stars
From the graph From the literature Spectral group
Vega 9300o
K 9300o
K A0
Altair 8100 8000 A7
Procoyon A 7500 7500 F5
Sun 5700 5740 G2
Sirius A 9500 9700 A1
Aldebaran 4200 4100 K5
Pollux 4700 4500 K0
Capella B 5200 4940 G5-G0
Regulus 9700 10300 B7
Canopus 7250 7350 F0
Fomalhaut 8700 8500 A3
Sirius B 8400 8200 A5
4d. Determination of the density of a star by using Balmer lines.
The C-factor of equation 1 is a product of factors of number densities of atoms and electrons. This
means that by using the approximate formula of equation 1 we obtain :
I = C λ-2
exp ( - (hν + J )/ kTe ) ( 16 )
Therefore we can express C as a function of the other parameters in equation 16 and by taking the ratio between
the density of a star compared to the sun, we obtain the following expression
Cstar / 1 = ( Iγ star / Iγ sun)( λmax star / λmax sun )2
exp ((hνmax star + JH )/ θstar - (hνmax sun + JH )/ θsun)
( 17 )
where C = 1 is the sun value and θ=kTe. The intensity ratio ( Iγ / Iγ sun ) here is the ratio between the γ-Balmer
line from the star and the sun from the data of Ref (32). λmax and the hνmax have also been taken from Ref (32)
and the electron temperature values have been taken from Ref (33) for different spectral classes. JH is the
ionization energy of hydrogen.
The results of 12 stars here, are shown in Fig 16 and Table 5 where ρ / ρ0 –values been calculated for 12
different main sequence stars. In Fig 16 a straight line is achieved following in the near of the Schwarzschild
line Ref 37 (p.555 )( Refs 34 and 36 ).
Table 5
Determination of density ratio of 12 stars relative to the sun
Star ρ / ρsun(new method) spectral class
Aldebaran 1.26 K5
Pollux 0.95 K0
Capella B 0.91 G5
Sun 1.0 G2
Procyon A 0.66 F5
Canopus 0.55 F0
12. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 40 | Page
Altair 0.45 A7
Sirius B 0.37 A5
Formalhaut 0.42 A3
Sirius A 0.42 A1
Vega 0.39 A0
Regulus 0.28 B7
η Ori 0.14 B1stars
Fig 16 Density determination of stars relative to the sun at different spectral classes. Filled circles = new
method , Filled triangles = Schwarzschild limit ( Reproduction from Ref 34 )
4e. Determination of the mass of the stars
The usual Mass-Luminosity relation in astronomy means that there is a linear relationship between
luminosity and mass of a star. Therefore there is a possibility to use the equation 1 in a similar way by the fact
that M α kTe .By using the approximate formula of
equation 1 we obtain :
I = C λ-2
( e x p (- (J +hν) / k Te ) (18)
Therefore we can express kTe as a function of the other parameters in equation 18. By taking the ratio between
the mass of a star compared to the sun (M0 ), we obtain the following expression :
Mstar / M0 sun = ln ( I λ2
/C0 )max sun( Jmean star+ hνmax star)/ ln ( I λ2
/C)maxstar ( Jmean sun+ hνmax sun)
( 19 )
The ln Iλ2
, C , Jmed and hνmax- values in equation 19 can be determined from Fig 12 and Table 2 in this paper.
The l n ( Iλ2
) –values can be shown directly from the graph in Fig 12 for a certain star and the C-values are
shown as the prolongation of the two lines in Fig 12 for a certain star placed on one of the lines. The M / M0 –
values have been tabled in Table 6 for 10 different stars, which show good agreement with the literature values.
This very nice agreement is also shown in Fig 17 between (M / M0) – values from this new method and
literature values and show a nice linear relationship ( r=0.97 ) Ref 34.
Fig 17. Determination of the mass of a number of stars with the new method together with literature
values. Correlation r= 0.97 . ( Reproduction from Ref 34 )
13. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 41 | Page
Table 6
Determination of the mass ratio relative to the sun
Star M / Mo (new method) M / Mo(Literature) Spectral class
Vega 2.55 2.50 A0
Formalhaut 2.15 2.30 A3
Sirius A 2.35 2.10 A1
Altair 1.62 1.70 A7
Dubhe 1.40 1.70 F0
α Centauri A 1.00 1.10 G2
Sun 1.00 1.00 G2
Capella B 0.76 0.80
V. Discussion
This paper shows that the new intensity formula seems to be applicable to many different kinds of
optical light sources at different experimental conditions and temperatures from all the methods shown in this
paper. This paper is an extended version of two earlier review papers concerning this new intensity formula. The
fluctuation analysis of spectral line intensity ratios in optical emission spectroscopy is a very sophisticated
method of sorting the correct formula, where questions concerning photon efficiency versus wavelength for
spectrometer systems, can be eliminated.
The absolute intensity method show linearity over 25 eV for C (l l) – lines and 14 eV for C(I)-lines.
This is impossible to achieve without a correct intensity formula. Deviations caused by photon efficiency versus
wavelength for spectrometer systems are here very small in these graphs. The most dominant linearity factor is a
correct exponent in the intensity formula.
In this paper the absolute intensity method shows good linearity for 17 atomic elements and 11 ionic elements
in the energy ranges 15 eV for atoms and up to 50 eV for ions and up to 200 eV for higher ions. This is
impossible to achieve without a correct intensity formula. The most dominating linearity factor is a correct
exponent in the intensity formula. Deviations caused by photon efficiency versus wavelength for spectrometer
systems are here very small in these graphs.
The electron temperatures (θ-values) determined in this paper are in accordance with second electron
measurements from the literature. There it is possible to study the mean values of half widths of the energy
distributions f(Ee) of secondary electrons emitted from different metal surfaces under impact of inert gas ions.
This half width is increased with ions from higher ionization states.
Both these measurements gave temperatures around 2 eV for atoms (17 elements) and around 4 eV for
ions(11 elements) and are in accordance to secondary electron measurements, which are a strong support of the
intensity formula. The nice linearity using the absolute intensity method for higher ions of oxygen and neon is a
strong evidence of the general recursion formula in equation 8, which includes the ΣJ- term, and has the same
structure as the new intensity formula in equation 1.
The results in Ref 26 about the photoelectric effect explain the general appearance of the shape of the current
versus frequency expression. By using the inverse of the approximate intensity formula in equation 1, a solution
about relationship between current and frequency has been achieved. This inverse is shown in equation 11 and is
demonstrated in Fig 8, where a nice relationship between literature experiment and the new theory were
achieved.
Fig 9 is a strong evidence of the J-term of equation 11.From this graph it is possible to study the J-
dependence of 22 different elements(metals). The “knee” of this curve depends of the heating effect at higher
frequencies. By expressing J as a function of λ as in equation 13 will also lead to a strong support of equation
11.
The J –term in equation 11 is also supported by different breakdown experiments with lasers. In these
experiments the electrons were created by the photoeffect from strong laser beams. The breakdown pressure is
here proportional to the number density of electrons(current) and therefore it will follow equation 11.
Alkali metals were also studied in a similar graph in Fig 10. The heating effect here is not so high and the
general appearance is the same as the other graphs.
The internal electron temperature was also determined in relation to the ionization energies. Intensity studies
were also done in the ICP- plasma, where the internal electron temperature was studied at different heights in
the plasma supporting the new intensity formula.
Studies from the LED-and flourescens experiments at room temperature were also discussed
in relation to the Planck profile of the new formula.
Breakdown- and X-ray experiments have also been discussed in relation to equations 11 and 1. These formulas
constitute new formulas for breakdown experiments and X-ray emissions.
14. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 42 | Page
In the nature the new formula and the fluctuation method have been tested in Ba-release experiments in the
upper atmosphere using rockets and spectrophotometers on the ground. Airglow and auroral emissions were also
measured on ground measurements with spectrophotometer, where the optical emission mechanism was studied.
These results were in agreement to the new intensity formula.
The absolute intensity method of analysis has shown to be a simple method of verifying the new intensity
formula by using atomic, ionic and stellar data. By using this method together with the new intensity formula it
has been possible to determine the mean electron temperature in different laboratory plasmas and in the optical
layers of a star without knowing so much about the chemical composition of the star. These mean electron
temperature values fit well with other methods from the literature. The method also gives an organizing method
for stars similar to the established HR-diagram. The Jmeanvalue has shown to be a kind of “signum” for every
star. Fig 12 has shown to be a valuable and simple method of organizing and classifying the stars without
knowing so many other details about the stars. The Balmer spectral absorption lines seem to follow the new
intensity formula too, which is clearly seen in Figs 13 and 14. This is clearly seen by the correlation coefficient (
0.98). This means that discrete emissions in the star do follow the new intensity formula but are heavily
absorbed in the star. Therefore, the light coming from the star is mostly continuous radiation following Planck
radiation law.
It has also been possible to determine the effective temperature of a number of stars from different spectral
classes on the main sequence. The results gave good agreement with the established temperature method by
Stefan-Boltzmann.
The density of a number of stars was also determined compared to the sun, from different spectral classes on the
main sequence. These values are in accordance with the Schwarzschild limit. The graph in Fig 16 shows a nice
linear relationship.
It was also possible to determine the mass of a number of stars compared to the sun from different spectral
classes on the main sequence. These values are in accordance with the literature values. The graph in Fig 17
shows a nice linear relationship.
Acknowledgement :
I express a big gratitude to my friend and collegue Dr. Sten Yngström at the Swedish Institute of
Space Physics for inspiring and skillful cooperation during many years. I also gratitude Prof. Bengt Hultqvist at
Swedish Institute of Space Physics for his encouraging support of this work in the beginning of this project.
References
[1]. Yngström S., Int. J. Theo. Phys. 33 (7): 1479 , (1994)
[2]. Thelin B., Eurasian Journal of Analytical Chemistry, Vol.4, Nr 3, s.226-233, (2009)
[3]. Thelin B., African Phys Review, 4 (2010), 121
[4]. Thelin B., Indian Journal of Pure & Applied Physics, Vol 50, (April 2012),231
[5]. Thelin B.,ICP Information. Newsletter, 10, 835 (1985)
[6]. Thelin B.,Analyst 111, 419, (1986)
[7]. Thelin B.,Analyst 112, 623, (1987)
[8]. Thelin B., Talanta 4, 317 (1988)
[9]. Thelin B., Can. J. Spectrosc. 33, 94 (1988)
[10]. Yngström S and Thelin B., Appl. Spectrosc. 44, No 9, 1566 (1990)
[11]. Thelin B. and Yngström S., Spectrochim. Acta 41B, 403 (1986)
[12]. Thelin B , Appl. Spectrosc. 44: 818. (1990)
[13]. W.F. Meggers, C.H. Corliss, and F. Scribner, Tables of Spectral Line Intensities, National Bureau of Standards ,Monograph 32 Part
1,Washington D.C. (1961)
[14]. Striganov A. R. and Sventitski N.E., Tables of Spectral Lines of Neutral and Ionized Atoms., IFI/Plenum , New York, (1968)
[15]. M.Kaminsky, Atomic & Ionic Impact Phenomena on Metal Surfaces, Springer Verlag, Berlin, Heidelberg, New York , 1965
[16]. Yngström S , Appl. Spectrosc. 48 (5): 587. (1994)
[17]. Thelin B., African Review of Physics, 7, 31 (2012)
[18]. Thelin B., African Review of Physics, 7, 459 (2012)
[19]. Blades M W, Horlick G , Spectrochim. Acta 36B (9), 861. (1981)
[20]. Li F., Son D.I., Kim T.W., Dong W. and Kim Y.H., Jpn J. Appl. Phys. 47 (6), 5086 (2008)
[21]. Choi J., Jhin J. Yang S. Baek J. Lee J. and Byun D., Jpn. J. Appl. Phys. 47 (11), 8265 (2008)
[22]. Ohshima Y, Kohn H, Lim E, Manaka T, Iwamoto M , Jpn. J. Appl. Phys. 47(2):1297. (2008),
[23]. Meek J.M. and Cragg J.D., Electrical Breakdown of Gases, New York, Brisbane, Toronto (1978)
[24]. Comton A.H. and Allison S.K., X-ray in Theory and Experiment , van Nostrand Company Inc., Princeton, New Jersey, Toronto,
London (1935)
[25]. Flugge S., Handbuch der Physik, Springer Verlag, Berlin, Göttingen, Heidelberg, (1957)
[26]. Thelin B., IOSR Journal of Applied Physics (IOSR-JAP) Vol 3 (5) p.59 (2013)
[27]. Hughes, A. L. and Du Bridge L.A., Photoelectric Phenomena, (1932)
[28]. Thelin B.,In Proceedings of the 16th
Annual Meeting on Atmospheric Studies by Optical Methods, Oulu, Finland, Tanskanen P. ed.
(1988)
[29]. Dick K.A., Barium releases at altitudes between 200 and 1000 km, A joint Max- Planck Institute-Nasa experiment, p.47,National
Aeronautic and Space Administration, Washington D.C.(1971)
15. Consequencies of the new intensity formula on many optical spectroscopy fields
www.iosrjournals.org 43 | Page
[30]. Thelin B., In Proceedings of the 14th
Annual Meeting on Atmospheric Studies by Optical Methods ,M.J.Rycroft, ed, Cambridge,
England (1986)
[31]. Barbier D., The airglow and the aurora, Pergamon Press London and New York, p.38(1955)(Symposium in Belfast September
1955)
[32]. Silva D.R. and Cornell M.E., Astrophysical Journal Suppliment Series, 81, No2, Aug. (1992)
[33]. Thelin B., Fizika B, 19, 4 (2010) 329.
[34]. Thelin B., IOSR Journal of Applied Physics(IOSR-JAP) 3, Issue 6 (2013) 42
[35]. Thelin B., Indian Journal of Pure & Applied Physics 51, (March 2013) p.174
[36]. Thelin B., IOSR Journal of Applied Physics(IOSR-JAP) 2, Issue 5 (2012) 48
[37]. Lang K.R., Astrophysical Formula , Springer Verlag , Berlin, Heidelberg, New York, (1974)