Map variables from CI860 to control applications Create applications using FF specific modules Download and verify correct operation 

1. ©ABBUniversity-1
RevisionB
E x t e n d e d A u t o m a t i o n S y s t e m 8 0 0 x A
Combined FF and IEC
Applications
BY
ASHVANI SHUKLA
C&I
RELIANCE

2. ©ABBUniversity-2
RevisionB
Overview
 Objectives
After this chapter you should be able to:
 Map variables from CI860 to control applications
 Create applications using FF specific modules
 Download and verify correct operation
 Reference Documentation
 3BDD012903 Industrial IT 800xA – Control and I/O –
FOUNDATION Fieldbus HSE Engineering and Configuration
 3BDD012902 Industrial IT 800xA – Device Management –
FOUNDATION Fieldbus Configuration
Combined FF and
IEC Applications

3. ©ABBUniversity-3
RevisionB
 Overview of simple FF / IEC control loop
 How to Configure a FF/IEC Application
Combined FF and IEC Applications
Combined FF and
IEC Applications

4. ©ABBUniversity-4
RevisionB
Overview of simple FF / IEC control loop
Overview of
simple FF / IEC
control loop

5. ©ABBUniversity-5
RevisionB
Data flow between FF and IEC 61131
Overview of
simple FF / IEC
control loop

6. ©ABBUniversity-6
RevisionB
 Overview of simple FF / IEC control loop
 How to Configure a FF/IEC Application
Combined FF and IEC Applications
Combined FF and
IEC Applications

7. ©ABBUniversity-7
RevisionB
Build the FBB-FF application
How to Configure
a FF/IEC
Application
 Workflow
1. Build your FBB-FF application
2. Instantiate and configure the CI860
3. Commissioning and testing application in FBB-FF
4. Upload FBB-FF project in AIP
5. Create 800xA Project
6. Build the IEC Application
7. Add CI860 objects (FBB-FF with CBM)
8. Assign both CI860 objects (FBB-FF with CBM)
9. Assign the CI860 channels to CBM variables
10. Commissioning and testing the IEC application
11. Testing in Aspect Integrator Platform

8. ©ABBUniversity-8
RevisionB
Build the FBB-FF application
How to Configure
a FF/IEC
Application
TF02
2600T
TZID

9. ©ABBUniversity-9
RevisionB
Configure Published/Subscribed variables
How to Configure
a FF/IEC
Application
All available signals are listed here.
The Filter below maybe used to
help find the require signal.
Shows were the
selected signal is
connected.
Check the box to
add the signal to the
CI860 Host.

10. ©ABBUniversity-10
RevisionB
Configure Published/Subscribed variables
How to Configure
a FF/IEC
Application
Select the required signal.
Signal sourceHost Connected Cycle timeData type

11. ©ABBUniversity-11
RevisionB
Commissioning and testing in FBB-FF
How to Configure
a FF/IEC
Application
FBAD TEMP_CNTRL: Check the OUT of the AI function block
TI_10.
FBAD FLOW_CNTRL: Check the Cas_IN of the PID function
block PC_10 (no live value why?)

12. ©ABBUniversity-12
RevisionB
Build IEC Application
How to Configure
a FF/IEC
Application
 Workflow
 Insert the Libraries into your Coontrol Builder M project and
Control Builder M application.
 In the CMD Editor of your application and instantiate the Control
Modules
 Do the connections in the CMD Editor
 On the Application Level create the Variables
 Parameterize the Control Modules

13. ©ABBUniversity-13
RevisionB
Build IEC Application
How to Configure
a FF/IEC
Application

14. ©ABBUniversity-14
RevisionB
Assign CI860 channels to IEC variables
How to Configure
a FF/IEC
Application
Open the Editor again with the
context menu on the CI860 object.
Notify that now the FF variables are
available in the column Protocol
Info.
Connect now the CI860 channels to
variables of your CBM application.

15. ©ABBUniversity-15
RevisionB
Commissioning and testing in CBM
How to Configure
a FF/IEC
Application

16. ©ABBUniversity-16
RevisionB
Testing in Aspect Integrator Platform
How to Configure
a FF/IEC
Application

17. ©ABBUniversity-17
RevisionB
Configure Client/Server Communications
How to Configure
a FF/IEC
Application
Add the C/S Signal Name
TT132_Target
Add the C/S Signal Name
TT132_Actual
Check the permitted boxes for
.Auto
.Man
.OOS

18. ©ABBUniversity-18
RevisionB
Configure Client/Server Communications
How to Configure
a FF/IEC
Application

19. ©ABBUniversity-19
RevisionB
Configure Client/Server Communications
How to Configure
a FF/IEC
Application
Connect the FFHSECommLib 1.2-4
Insert the FFHSECommLib 1.2-4
Connect the BasicLib

20. ©ABBUniversity-20
RevisionB
Configure Client/Server Communications
How to Configure
a FF/IEC
Application
The Channel is the
CI860 position as a
string.
The DeviceTag is the Device
Tag name as a string.

21. ©ABBUniversity-21
RevisionB
Configure Client/Server Communications
How to Configure
a FF/IEC
Application

22. ©ABBUniversity-22
RevisionB
Configure Client/Server Communications
How to Configure
a FF/IEC
Application

23. ©ABBUniversity-23
RevisionB
Configure Client/Server Communications
How to Configure
a FF/IEC
Application

24. ©ABBUniversity-24
RevisionB