Hybrid vehicle drivetrains- My published manuscript in International Research...ZelieusNamirian
Here is an overview of my research paper "A comprehensive overview of hybrid vehicle drivetrains", It contains an overview of Energy Management systems(EMS), Hybrid Vehicle types based on its drivetrains- Series, Parallel, Power Split (Series/parallel) and degrees of hybridization with some final notes.
Energy management for hybrid electric vehicles using rule based strategy and...IJECEIAES
Recently, hybrid electric vehicles are increasingly being used to replace conventional vehicles. In this paper, a control methodology is designed that can reduce fuel consumption and improve the vehicle’s dynamic response. As the control unit based on this methodology consists of two levels, the first depends on the application of a rule-based strategy for energy management between the main components of the vehicle, and this strategy is based on a set of rules that are activated according to parameters such as vehicle speed and the battery state of charge (SOC) that control the activation/deactivation of the internal combustion engine (ICE), motor, and generator. This level also makes ICE operate at operation points with high efficiency, which is represented by the optimal operating line (OOL). The second level is called the low control level, and it consists of two proportional-integral (PI) controllers used to control the speed of each ICE and the motor to obtain the appropriate torque for both of them to drive the vehicle properly. The particle swarming optimization (PSO) algorithm is utilized to tune the parameters of the PI controllers. The obtained results have effectively minimized fuel consumption and improved the performance of the vehicle.
1. Designed the component sizes, designed the energy management algorithm and HEV powertrain using AUTONOMIE software.
2. Simulated the model to analyze the performances of energy management algorithm
Hybrid pneumatic engine with exhaust heat recoveryLiviu Giurca
The invention relates to a four-stoke hybrid pneumatic engine of the type ensuring energy recovery, which can be used for road motor vehicles or other transportation means with a view to reducing the fuel consumption and emissions which are deemed to cause the greenhouse effect. According to the invention, the hybrid pneumatic engine has a number of cylinders which are of the conventional type and at least one modified cylinder operating an active valve actuated by a mechatronic system.
Hybrid vehicle drivetrains- My published manuscript in International Research...ZelieusNamirian
Here is an overview of my research paper "A comprehensive overview of hybrid vehicle drivetrains", It contains an overview of Energy Management systems(EMS), Hybrid Vehicle types based on its drivetrains- Series, Parallel, Power Split (Series/parallel) and degrees of hybridization with some final notes.
Energy management for hybrid electric vehicles using rule based strategy and...IJECEIAES
Recently, hybrid electric vehicles are increasingly being used to replace conventional vehicles. In this paper, a control methodology is designed that can reduce fuel consumption and improve the vehicle’s dynamic response. As the control unit based on this methodology consists of two levels, the first depends on the application of a rule-based strategy for energy management between the main components of the vehicle, and this strategy is based on a set of rules that are activated according to parameters such as vehicle speed and the battery state of charge (SOC) that control the activation/deactivation of the internal combustion engine (ICE), motor, and generator. This level also makes ICE operate at operation points with high efficiency, which is represented by the optimal operating line (OOL). The second level is called the low control level, and it consists of two proportional-integral (PI) controllers used to control the speed of each ICE and the motor to obtain the appropriate torque for both of them to drive the vehicle properly. The particle swarming optimization (PSO) algorithm is utilized to tune the parameters of the PI controllers. The obtained results have effectively minimized fuel consumption and improved the performance of the vehicle.
1. Designed the component sizes, designed the energy management algorithm and HEV powertrain using AUTONOMIE software.
2. Simulated the model to analyze the performances of energy management algorithm
Hybrid pneumatic engine with exhaust heat recoveryLiviu Giurca
The invention relates to a four-stoke hybrid pneumatic engine of the type ensuring energy recovery, which can be used for road motor vehicles or other transportation means with a view to reducing the fuel consumption and emissions which are deemed to cause the greenhouse effect. According to the invention, the hybrid pneumatic engine has a number of cylinders which are of the conventional type and at least one modified cylinder operating an active valve actuated by a mechatronic system.
Computational modelling of six speed hybrid gear box and its simulation using...IJERA Editor
The paper introduces an idea which adds itself into contribution of getting best fuel economy of a passenger car
when it is running at high speed on a highway. A six speed (forward) gear box is addressed in the paper which is
controlled manually and automatically as well. The paper introduces an advancement in manual transmission
gear box for passenger cars. Hydraulic circuit is designed with mechatronics point of view and resulting in
making the shifting of gear automatically. A computational design is made of the Hybrid Gear Box (HGB) using
CATIA P3 V5 as a designing software. A new gear meshing in 5 speed manual transmission gear box which
synchronizes with the output shaft of the transmission automatically after getting command by the automated
system designed. Parameters are considered on the basis of practical model and is been simulated by using
Simdriveline as the Simulink tool of MATLAB r2010a. The mechanical properties of the components of the
hybrid gear box is calculated on the basis of the functional parameters and with help of the fundamental and
dependent properties formulation. The final result is the graphical analysis of the model forobtaining at least
15% fuel efficient than any of the vehicle of same configurations.
Computational modelling of six speed hybrid gear box and its simulation using...IJERA Editor
The paper introduces an idea which adds itself into contribution of getting best fuel economy of a passenger car
when it is running at high speed on a highway. A six speed (forward) gear box is addressed in the paper which is
controlled manually and automatically as well. The paper introduces an advancement in manual transmission
gear box for passenger cars. Hydraulic circuit is designed with mechatronics point of view and resulting in
making the shifting of gear automatically. A computational design is made of the Hybrid Gear Box (HGB) using
CATIA P3 V5 as a designing software. A new gear meshing in 5 speed manual transmission gear box which
synchronizes with the output shaft of the transmission automatically after getting command by the automated
system designed. Parameters are considered on the basis of practical model and is been simulated by using
Simdriveline as the Simulink tool of MATLAB r2010a. The mechanical properties of the components of the
hybrid gear box is calculated on the basis of the functional parameters and with help of the fundamental and
dependent properties formulation. The final result is the graphical analysis of the model forobtaining at least
15% fuel efficient than any of the vehicle of same configurations.
Study and Analysis of Nonlinear Constrained Components A Study of Plug-in Hyb...ijtsrd
Today transportation is one of the rapidly evolving technologies in the world. With the stringent mandatory emission regulations and high fuel prices, researchers and manufacturers are ever increasingly pushed to the frontiers of research in pursuit of alternative propulsion systems. Electrically propelled vehicles are one of the most promising solutions among all the other alternatives, as far as reliability, availability, feasibility and safety issues are concerned. However, the shortcomings of a fully electric vehicle in fulfilling all performance requirements make the electrification of the conventional engine powered vehicles in the form of a plug-in hybrid electric vehicle PHEV the most feasible propulsion systems. Sadia Andaleeb "Study and Analysis of Nonlinear Constrained Components (A Study of Plug-in Hybrid Electric Vehicle)" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-2 , February 2019, URL: https://www.ijtsrd.com/papers/ijtsrd20308.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/20308/study-and-analysis-of-nonlinear-constrained-components-a-study-of-plug-in-hybrid-electric-vehicle/sadia-andaleeb
Hybrid Power Systems for Construction Machinery: Aspects of System Design and...Reno Filla
This paper will examine the wheel loader as a system with two parallel energy conversion systems that show a complex interaction with each other and with the power source. Using a systematic design approach, several principle design solutions for hybridization can be found.
Furthermore, the human operator with his/her control actions needs to be considered as part of the total system. This paper will therefore also connect to results from ongoing and previous research into operator workload and operability.
http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-51999
http://dx.doi.org/10.1115/IMECE2009-10458
A 'gasoline-electric hybrid Vehicle’ or 'hybrid electric vehicle' is a vehicle which relies not only on batteries but also on an internal combustion engine which drives a generator to provide the electricity and may also drive a wheel. It has great advantages over the previously used gasoline engine that drives the power from gasoline only. It also is a major source of air pollution.
Fuel efficiency in construction equipment – optimize the machine as one systemReno Filla
In order to further optimize the fuel efficiency and productivity of construction equipment, 3 main potentials have been identified:
• job site optimization
• machine use optimization
• machine optimization
The focus of this paper is the machine optimization on the example of a wheel loader.
Optimizing losses in individual components must be done, but it will not be a game changer for fuel efficiency improvement. Three areas for promising improvement potentials:
• Optimizing the systems interactions
• Decoupling of systems
• Reduction of losses
One example is shown for a total machine optimization approach: the “Reverse by Braking” function is using the machine operating brakes to slow down the machine during power shuttle instead of using the engine power.
Decoupling of systems requires continuously variable transmission (CVT) functionality for the driveline. This can be achieved with hydraulic or electric CVTs. Two examples for decoupling systems are shown: the Volvo hydrostatic powersplit CVT prototype and a series hybrid wheel loader.
Further future potentials are explored, while the driveline and hydraulic technology are the enablers for drastic improvements: electrified site, plug in hybrid, alternative fuels, and new machine concepts.
Design of the electric propulsion system for dumper trucks IJECEIAES
This article designs a high-efficiency electric propulsion system for industrial trucks, such as dumper trucks. This design proposes using an alternative energy storage system of green H2 hydrogen to reduce emissions. This design determines the propulsion systems' technical and power requirements, starting with each vehicle's driving and duty cycles. For this analysis, a longitudinal dynamic model is created, with which the behavior of the energy conversion chain of the propulsion system is established. The evolutionary methodology analyzes the dynamic forces of vehicle interaction to size the propulsion system's components and the storage system. Using green H2 as fuel allows an energy yield three times higher than diesel. In addition, using this green hydrogen prevents the emission of 264,172 kg of CO₂, which the dumper emits when consuming 1,000 daily gallons of diesel within its working day.
Computational modelling of six speed hybrid gear box and its simulation using...IJERA Editor
The paper introduces an idea which adds itself into contribution of getting best fuel economy of a passenger car
when it is running at high speed on a highway. A six speed (forward) gear box is addressed in the paper which is
controlled manually and automatically as well. The paper introduces an advancement in manual transmission
gear box for passenger cars. Hydraulic circuit is designed with mechatronics point of view and resulting in
making the shifting of gear automatically. A computational design is made of the Hybrid Gear Box (HGB) using
CATIA P3 V5 as a designing software. A new gear meshing in 5 speed manual transmission gear box which
synchronizes with the output shaft of the transmission automatically after getting command by the automated
system designed. Parameters are considered on the basis of practical model and is been simulated by using
Simdriveline as the Simulink tool of MATLAB r2010a. The mechanical properties of the components of the
hybrid gear box is calculated on the basis of the functional parameters and with help of the fundamental and
dependent properties formulation. The final result is the graphical analysis of the model forobtaining at least
15% fuel efficient than any of the vehicle of same configurations.
Computational modelling of six speed hybrid gear box and its simulation using...IJERA Editor
The paper introduces an idea which adds itself into contribution of getting best fuel economy of a passenger car
when it is running at high speed on a highway. A six speed (forward) gear box is addressed in the paper which is
controlled manually and automatically as well. The paper introduces an advancement in manual transmission
gear box for passenger cars. Hydraulic circuit is designed with mechatronics point of view and resulting in
making the shifting of gear automatically. A computational design is made of the Hybrid Gear Box (HGB) using
CATIA P3 V5 as a designing software. A new gear meshing in 5 speed manual transmission gear box which
synchronizes with the output shaft of the transmission automatically after getting command by the automated
system designed. Parameters are considered on the basis of practical model and is been simulated by using
Simdriveline as the Simulink tool of MATLAB r2010a. The mechanical properties of the components of the
hybrid gear box is calculated on the basis of the functional parameters and with help of the fundamental and
dependent properties formulation. The final result is the graphical analysis of the model forobtaining at least
15% fuel efficient than any of the vehicle of same configurations.
Study and Analysis of Nonlinear Constrained Components A Study of Plug-in Hyb...ijtsrd
Today transportation is one of the rapidly evolving technologies in the world. With the stringent mandatory emission regulations and high fuel prices, researchers and manufacturers are ever increasingly pushed to the frontiers of research in pursuit of alternative propulsion systems. Electrically propelled vehicles are one of the most promising solutions among all the other alternatives, as far as reliability, availability, feasibility and safety issues are concerned. However, the shortcomings of a fully electric vehicle in fulfilling all performance requirements make the electrification of the conventional engine powered vehicles in the form of a plug-in hybrid electric vehicle PHEV the most feasible propulsion systems. Sadia Andaleeb "Study and Analysis of Nonlinear Constrained Components (A Study of Plug-in Hybrid Electric Vehicle)" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-2 , February 2019, URL: https://www.ijtsrd.com/papers/ijtsrd20308.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/20308/study-and-analysis-of-nonlinear-constrained-components-a-study-of-plug-in-hybrid-electric-vehicle/sadia-andaleeb
Hybrid Power Systems for Construction Machinery: Aspects of System Design and...Reno Filla
This paper will examine the wheel loader as a system with two parallel energy conversion systems that show a complex interaction with each other and with the power source. Using a systematic design approach, several principle design solutions for hybridization can be found.
Furthermore, the human operator with his/her control actions needs to be considered as part of the total system. This paper will therefore also connect to results from ongoing and previous research into operator workload and operability.
http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-51999
http://dx.doi.org/10.1115/IMECE2009-10458
A 'gasoline-electric hybrid Vehicle’ or 'hybrid electric vehicle' is a vehicle which relies not only on batteries but also on an internal combustion engine which drives a generator to provide the electricity and may also drive a wheel. It has great advantages over the previously used gasoline engine that drives the power from gasoline only. It also is a major source of air pollution.
Fuel efficiency in construction equipment – optimize the machine as one systemReno Filla
In order to further optimize the fuel efficiency and productivity of construction equipment, 3 main potentials have been identified:
• job site optimization
• machine use optimization
• machine optimization
The focus of this paper is the machine optimization on the example of a wheel loader.
Optimizing losses in individual components must be done, but it will not be a game changer for fuel efficiency improvement. Three areas for promising improvement potentials:
• Optimizing the systems interactions
• Decoupling of systems
• Reduction of losses
One example is shown for a total machine optimization approach: the “Reverse by Braking” function is using the machine operating brakes to slow down the machine during power shuttle instead of using the engine power.
Decoupling of systems requires continuously variable transmission (CVT) functionality for the driveline. This can be achieved with hydraulic or electric CVTs. Two examples for decoupling systems are shown: the Volvo hydrostatic powersplit CVT prototype and a series hybrid wheel loader.
Further future potentials are explored, while the driveline and hydraulic technology are the enablers for drastic improvements: electrified site, plug in hybrid, alternative fuels, and new machine concepts.
Design of the electric propulsion system for dumper trucks IJECEIAES
This article designs a high-efficiency electric propulsion system for industrial trucks, such as dumper trucks. This design proposes using an alternative energy storage system of green H2 hydrogen to reduce emissions. This design determines the propulsion systems' technical and power requirements, starting with each vehicle's driving and duty cycles. For this analysis, a longitudinal dynamic model is created, with which the behavior of the energy conversion chain of the propulsion system is established. The evolutionary methodology analyzes the dynamic forces of vehicle interaction to size the propulsion system's components and the storage system. Using green H2 as fuel allows an energy yield three times higher than diesel. In addition, using this green hydrogen prevents the emission of 264,172 kg of CO₂, which the dumper emits when consuming 1,000 daily gallons of diesel within its working day.
Similar to Advanced Analysis and Modelling of Hydraulic Hybrid Vehicles (20)
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.