1) The document reviews dynamic modeling and simulation of a hybrid power system for electric vehicle applications. It discusses modeling a Toyota Prius plug-in hybrid vehicle using Autonomies software.
2) An optimization problem was formulated to minimize gasoline consumption during typical driving cycles. Factors like engine power, battery cells, and motor power were optimized using a genetic algorithm.
3) The component sizing procedure achieved a significant reduction in fuel consumption compared to the baseline model in both urban and highway driving cycles. However, some optimization results that did not consider limits led to unrealistic vehicle performance.
Study and Analysis of Nonlinear Constrained Components A Study of Plug-in Hyb...ijtsrd
Today transportation is one of the rapidly evolving technologies in the world. With the stringent mandatory emission regulations and high fuel prices, researchers and manufacturers are ever increasingly pushed to the frontiers of research in pursuit of alternative propulsion systems. Electrically propelled vehicles are one of the most promising solutions among all the other alternatives, as far as reliability, availability, feasibility and safety issues are concerned. However, the shortcomings of a fully electric vehicle in fulfilling all performance requirements make the electrification of the conventional engine powered vehicles in the form of a plug-in hybrid electric vehicle PHEV the most feasible propulsion systems. Sadia Andaleeb "Study and Analysis of Nonlinear Constrained Components (A Study of Plug-in Hybrid Electric Vehicle)" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-2 , February 2019, URL: https://www.ijtsrd.com/papers/ijtsrd20308.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/20308/study-and-analysis-of-nonlinear-constrained-components-a-study-of-plug-in-hybrid-electric-vehicle/sadia-andaleeb
Study and Analysis of Nonlinear Constrained Components A Study of Plug-in Hyb...ijtsrd
Today transportation is one of the rapidly evolving technologies in the world. With the stringent mandatory emission regulations and high fuel prices, researchers and manufacturers are ever increasingly pushed to the frontiers of research in pursuit of alternative propulsion systems. Electrically propelled vehicles are one of the most promising solutions among all the other alternatives, as far as reliability, availability, feasibility and safety issues are concerned. However, the shortcomings of a fully electric vehicle in fulfilling all performance requirements make the electrification of the conventional engine powered vehicles in the form of a plug-in hybrid electric vehicle PHEV the most feasible propulsion systems. Sadia Andaleeb "Study and Analysis of Nonlinear Constrained Components (A Study of Plug-in Hybrid Electric Vehicle)" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-2 , February 2019, URL: https://www.ijtsrd.com/papers/ijtsrd20308.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/20308/study-and-analysis-of-nonlinear-constrained-components-a-study-of-plug-in-hybrid-electric-vehicle/sadia-andaleeb
Hybrid vehicle drivetrains- My published manuscript in International Research...ZelieusNamirian
Here is an overview of my research paper "A comprehensive overview of hybrid vehicle drivetrains", It contains an overview of Energy Management systems(EMS), Hybrid Vehicle types based on its drivetrains- Series, Parallel, Power Split (Series/parallel) and degrees of hybridization with some final notes.
Hybrid Electric Vehicle Charging by Solar Panel using of SupercapacitorsYogeshIJTSRD
In recent years, the demand for electric EV has increased drastically because of the rising pollution from emissions into the atmosphere in recent years. EV’s have simpler architecture, lower noise levels, better stability, and, most significantly, they safeguard the environment. Rapidly increasing population, energy consumption, and the need to reduce emissions through the conventional vehicle have motivated researchers to study the electric hybrid vehicles EHVs . In normal scenario in INDIA in electric vehicles like E cabs and E cars conventional battery is used and the real drawback of conventional batteries is that it drained out fast when used with full capacity and rechargeable is time significantly high usually 7 to 8 hours. A large number of methods have already been already proposed by various researchers that can solve the problem, however, these systems were not efficient enough for draining out the charging in EV. In order to overcome the limitation rapid discharge and slow recharge supercapacitors can be very significant solution of this problems. Using of solar panel is precure our environment which can be most important thing in this developing and growing world the use of solar in vehicle and using electric cars can be safeguard of our society and we can be free from using petroleum fuels which are limited and world can be made safer for our upcoming generations. supercapacitor used as additional energy storage for hybrid wind and photovoltaic system. It charges energy when it is windy or sunny and discharges when there is no power generated from photovoltaic or wind due to the sudden passing clouds disturbance or very low wind speed. Hence, it is necessary to understand the characteristics of the supercapacitor and determine these different electric models. Satya Veer Singh | Poonam Kumari "Hybrid Electric Vehicle Charging by Solar Panel using of Supercapacitors" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45037.pdf Paper URL: https://www.ijtsrd.com/engineering/other/45037/hybrid-electric-vehicle-charging-by-solar-panel-using-of-supercapacitors/satya-veer-singh
1. Designed the component sizes, designed the energy management algorithm and HEV powertrain using AUTONOMIE software.
2. Simulated the model to analyze the performances of energy management algorithm
Survey on efficient plug in hybrid vehicle chargingeSAT Journals
Abstract
Our future depends upon the renewable energy sources. Since many years vehicles have relied on combustion fuel like oil and
diesel, which will create problem in near future as there are limited reserves of fossil fuels. Hence the most important fact is to
preserve energy. So, plug-in hybrid vehicle (PHEV) is good and effective solution for eco-friendly transportation system.
Therefore, in this paper a plug-in hybrid vehicle approach is presented along with portable solar panel mounted on it to charge
battery. As solar panel is less efficient, a new technique called external light trapping is presented. A 3D printed parabolic
concentrator is used for this purpose. It redirects reflected photons back to solar cells and hence due to multiple reflections its
power conversion efficiency increases. If in any case, battery run out of charge then to charge it mobile chargers (MC) are used.
An android application is developed to support PHEV mobility. It provides full support to driver through its various functions like
monitoring of battery, prediction of range it can travel with current battery state and its location. The mobile server based on
queuing approach determines design parameter for such mobile charging system. An NJN (nearest-job-next) strategy is used to
serve this purpose. In NJN, MC serves next closest PHEV when its current job is done. Moreover, driver can reserve charging slot
based on their availability. So, in short our main purpose is to reduce carbon dioxide emission and mitigate PHEV driver range
anxiety problem.
Keywords: Battery Charging, 3D Printed Parabolic Concentrator, Queuing Theory, Slot Booking, Plug-In Hybrid
Vehicle.
Hybrid vehicle drivetrains- My published manuscript in International Research...ZelieusNamirian
Here is an overview of my research paper "A comprehensive overview of hybrid vehicle drivetrains", It contains an overview of Energy Management systems(EMS), Hybrid Vehicle types based on its drivetrains- Series, Parallel, Power Split (Series/parallel) and degrees of hybridization with some final notes.
Hybrid Electric Vehicle Charging by Solar Panel using of SupercapacitorsYogeshIJTSRD
In recent years, the demand for electric EV has increased drastically because of the rising pollution from emissions into the atmosphere in recent years. EV’s have simpler architecture, lower noise levels, better stability, and, most significantly, they safeguard the environment. Rapidly increasing population, energy consumption, and the need to reduce emissions through the conventional vehicle have motivated researchers to study the electric hybrid vehicles EHVs . In normal scenario in INDIA in electric vehicles like E cabs and E cars conventional battery is used and the real drawback of conventional batteries is that it drained out fast when used with full capacity and rechargeable is time significantly high usually 7 to 8 hours. A large number of methods have already been already proposed by various researchers that can solve the problem, however, these systems were not efficient enough for draining out the charging in EV. In order to overcome the limitation rapid discharge and slow recharge supercapacitors can be very significant solution of this problems. Using of solar panel is precure our environment which can be most important thing in this developing and growing world the use of solar in vehicle and using electric cars can be safeguard of our society and we can be free from using petroleum fuels which are limited and world can be made safer for our upcoming generations. supercapacitor used as additional energy storage for hybrid wind and photovoltaic system. It charges energy when it is windy or sunny and discharges when there is no power generated from photovoltaic or wind due to the sudden passing clouds disturbance or very low wind speed. Hence, it is necessary to understand the characteristics of the supercapacitor and determine these different electric models. Satya Veer Singh | Poonam Kumari "Hybrid Electric Vehicle Charging by Solar Panel using of Supercapacitors" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45037.pdf Paper URL: https://www.ijtsrd.com/engineering/other/45037/hybrid-electric-vehicle-charging-by-solar-panel-using-of-supercapacitors/satya-veer-singh
1. Designed the component sizes, designed the energy management algorithm and HEV powertrain using AUTONOMIE software.
2. Simulated the model to analyze the performances of energy management algorithm
Survey on efficient plug in hybrid vehicle chargingeSAT Journals
Abstract
Our future depends upon the renewable energy sources. Since many years vehicles have relied on combustion fuel like oil and
diesel, which will create problem in near future as there are limited reserves of fossil fuels. Hence the most important fact is to
preserve energy. So, plug-in hybrid vehicle (PHEV) is good and effective solution for eco-friendly transportation system.
Therefore, in this paper a plug-in hybrid vehicle approach is presented along with portable solar panel mounted on it to charge
battery. As solar panel is less efficient, a new technique called external light trapping is presented. A 3D printed parabolic
concentrator is used for this purpose. It redirects reflected photons back to solar cells and hence due to multiple reflections its
power conversion efficiency increases. If in any case, battery run out of charge then to charge it mobile chargers (MC) are used.
An android application is developed to support PHEV mobility. It provides full support to driver through its various functions like
monitoring of battery, prediction of range it can travel with current battery state and its location. The mobile server based on
queuing approach determines design parameter for such mobile charging system. An NJN (nearest-job-next) strategy is used to
serve this purpose. In NJN, MC serves next closest PHEV when its current job is done. Moreover, driver can reserve charging slot
based on their availability. So, in short our main purpose is to reduce carbon dioxide emission and mitigate PHEV driver range
anxiety problem.
Keywords: Battery Charging, 3D Printed Parabolic Concentrator, Queuing Theory, Slot Booking, Plug-In Hybrid
Vehicle.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.