A new algorithm is proposed which is used with
existing null-data subcarrier switching method of Peak to
Average Power Ratio (PAPR) reduction in OFDM to lower the
computational complexity. This proposed algorithm is very
simple and achieves significant reduction in computational
overhead without sacrificing PAPR reduction capability of
null-data subcarrier switching method. The proposed
algorithm is compatible with the current commercial systems
and it can be used with other existing algorithms to reduce
the computational overhead further. The proposed algorithm
is very useful in delay sensitive services. The effectiveness of
the proposed algorithm is demonstrated by presenting
simulation results of PAPR and computational time
requirement.
Performance of Multiple symbol representation with clipping scheme for PAPR r...ijsrd.com
OFDM is one of the multicarrier modulation technique used in various communication systems. The major problem one faces while implementing this system is the high peak to average power .For an efficient OFDM system this PAPR should be low. In this paper a hybrid PAPR (peak to average power ratio) reduction technique for the OFDM (orthogonal frequency division multiplexing) signal which combines a multiple symbol representations method with a signal clipping method is proposed. In multiple symbol representations alternative signaling points are used to represent one symbol and PAPR is further reduced with the clipping scheme. The performance of the hybrid scheme is compared with the partial transmit sequence which is one of the other PAPR reduction scheme. In partial transmit sequence the input data is divided in to disjoint blocks transformed in to time domain sequence and rotated by phase factors. Theoretical analysis and simulation results validate that the proposed scheme has the ability to provide large PAPR reduction, low bit error rate. Performance analysis is also done with the partial transmit sequence scheme.
Hybrid approach to solve the problem of papr in ofdm signal a surveyeSAT Journals
“Orthogonal frequency division multiplexing
method used to achieve the today’s need of wireless communication
3GPP Association for the use of LTE. The
higher data rate, higher bit rate, mitigated delay spread, lower multipath distortion,
OFDM system has few major issues associated with
ratio (PAPR)” associated with the signal.
interleaved OFDM, selective mapping (SLM)
windowing, clipping, filtering, tone rejection(TR), tone injection(TI), compandin
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
A Hybrid PAPR Reduction Scheme for OFDM System ijmnct
Orthogonal frequency division multiplexing (OFDM) i
s considered as most efficient technique for future
wireless communication systems due to its higher sp
ectral bandwidth efficiency, robustness to frequenc
y
selective fading channels, etc. However, the succes
sful implementation of the OFDM system necessitates
several difficulties. The biggest disadvantage to w
ork with OFDM system is its high peak-to-average po
wer
ratio PAPR leadsto severe inter carrier interferenc
e, out-of-band radiation, and poor bit error rate
performance due to the nonlinearity of the high pow
er amplifier. In this paper, a novel hybrid techniq
ue is
proposed to reduce PAPR further and comparison has
been done with conventional techniques as well.
Simulated results are presentedconfirm theoretical
results.MATLAB 7.5 is used to simulate the results
for system parametersconsidered.
SLM-PTS BASED PAPR REDUCTION TECHNIQUES IN OFDM SYSTEMHariniChaganti1
Signals, which were initially sent in the analog domain, are being sent more and more in the digital domain these days. For better transmission, even single–carrier waves are being replaced by multi–carriers. Multi-carrier
systems like OFDM are now – a – days being implemented commonly. In the OFDM system,
orthogonally placed subcarriers are used to carry the data from the transmitter end to the receiver end. The presence of a guard band in this system deals with the problem of ISI and noise is minimized by a larger number of sub–carriers. But the large Peak– to –Average Power Ratio of these signal have some undesirable effects on the system. The Peak-to-Average Power Ratio is the ratio between the maximum power and average power of a complex passband signal. It causes many disadvantages like band-in and band-out variation, low signal to quantization noise ratio, low efficiency of power amplifier, etc. Hence, it is necessary to reduce PAPR in OFDM for its efficient use.
In this project, the main objective is to study the basics of an OFDM System and analyze and
simulate various methods such as clipping and filtering, selected mapping, Partial transmit sequence
to reduce the PAPR in the system and compare these techniques with and without PAPR reduction to
obtain an efficient technique so that this system can be used more commonly and effectively.
International Journal of Engineering Research and Applications (IJERA) is a team of researchers not publication services or private publications running the journals for monetary benefits, we are association of scientists and academia who focus only on supporting authors who want to publish their work. The articles published in our journal can be accessed online, all the articles will be archived for real time access.
Our journal system primarily aims to bring out the research talent and the works done by sciaentists, academia, engineers, practitioners, scholars, post graduate students of engineering and science. This journal aims to cover the scientific research in a broader sense and not publishing a niche area of research facilitating researchers from various verticals to publish their papers. It is also aimed to provide a platform for the researchers to publish in a shorter of time, enabling them to continue further All articles published are freely available to scientific researchers in the Government agencies,educators and the general public. We are taking serious efforts to promote our journal across the globe in various ways, we are sure that our journal will act as a scientific platform for all researchers to publish their works online.
Performance of Multiple symbol representation with clipping scheme for PAPR r...ijsrd.com
OFDM is one of the multicarrier modulation technique used in various communication systems. The major problem one faces while implementing this system is the high peak to average power .For an efficient OFDM system this PAPR should be low. In this paper a hybrid PAPR (peak to average power ratio) reduction technique for the OFDM (orthogonal frequency division multiplexing) signal which combines a multiple symbol representations method with a signal clipping method is proposed. In multiple symbol representations alternative signaling points are used to represent one symbol and PAPR is further reduced with the clipping scheme. The performance of the hybrid scheme is compared with the partial transmit sequence which is one of the other PAPR reduction scheme. In partial transmit sequence the input data is divided in to disjoint blocks transformed in to time domain sequence and rotated by phase factors. Theoretical analysis and simulation results validate that the proposed scheme has the ability to provide large PAPR reduction, low bit error rate. Performance analysis is also done with the partial transmit sequence scheme.
Hybrid approach to solve the problem of papr in ofdm signal a surveyeSAT Journals
“Orthogonal frequency division multiplexing
method used to achieve the today’s need of wireless communication
3GPP Association for the use of LTE. The
higher data rate, higher bit rate, mitigated delay spread, lower multipath distortion,
OFDM system has few major issues associated with
ratio (PAPR)” associated with the signal.
interleaved OFDM, selective mapping (SLM)
windowing, clipping, filtering, tone rejection(TR), tone injection(TI), compandin
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
A Hybrid PAPR Reduction Scheme for OFDM System ijmnct
Orthogonal frequency division multiplexing (OFDM) i
s considered as most efficient technique for future
wireless communication systems due to its higher sp
ectral bandwidth efficiency, robustness to frequenc
y
selective fading channels, etc. However, the succes
sful implementation of the OFDM system necessitates
several difficulties. The biggest disadvantage to w
ork with OFDM system is its high peak-to-average po
wer
ratio PAPR leadsto severe inter carrier interferenc
e, out-of-band radiation, and poor bit error rate
performance due to the nonlinearity of the high pow
er amplifier. In this paper, a novel hybrid techniq
ue is
proposed to reduce PAPR further and comparison has
been done with conventional techniques as well.
Simulated results are presentedconfirm theoretical
results.MATLAB 7.5 is used to simulate the results
for system parametersconsidered.
SLM-PTS BASED PAPR REDUCTION TECHNIQUES IN OFDM SYSTEMHariniChaganti1
Signals, which were initially sent in the analog domain, are being sent more and more in the digital domain these days. For better transmission, even single–carrier waves are being replaced by multi–carriers. Multi-carrier
systems like OFDM are now – a – days being implemented commonly. In the OFDM system,
orthogonally placed subcarriers are used to carry the data from the transmitter end to the receiver end. The presence of a guard band in this system deals with the problem of ISI and noise is minimized by a larger number of sub–carriers. But the large Peak– to –Average Power Ratio of these signal have some undesirable effects on the system. The Peak-to-Average Power Ratio is the ratio between the maximum power and average power of a complex passband signal. It causes many disadvantages like band-in and band-out variation, low signal to quantization noise ratio, low efficiency of power amplifier, etc. Hence, it is necessary to reduce PAPR in OFDM for its efficient use.
In this project, the main objective is to study the basics of an OFDM System and analyze and
simulate various methods such as clipping and filtering, selected mapping, Partial transmit sequence
to reduce the PAPR in the system and compare these techniques with and without PAPR reduction to
obtain an efficient technique so that this system can be used more commonly and effectively.
International Journal of Engineering Research and Applications (IJERA) is a team of researchers not publication services or private publications running the journals for monetary benefits, we are association of scientists and academia who focus only on supporting authors who want to publish their work. The articles published in our journal can be accessed online, all the articles will be archived for real time access.
Our journal system primarily aims to bring out the research talent and the works done by sciaentists, academia, engineers, practitioners, scholars, post graduate students of engineering and science. This journal aims to cover the scientific research in a broader sense and not publishing a niche area of research facilitating researchers from various verticals to publish their papers. It is also aimed to provide a platform for the researchers to publish in a shorter of time, enabling them to continue further All articles published are freely available to scientific researchers in the Government agencies,educators and the general public. We are taking serious efforts to promote our journal across the globe in various ways, we are sure that our journal will act as a scientific platform for all researchers to publish their works online.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
PAPR REDUCTION OF OFDM SIGNAL BY USING COMBINED HADAMARD AND MODIFIED MEU-LAW...IJCNCJournal
Orthogonal frequency division multiplexing (OFDM) is a technique which gives high quality of service (QOS) to the users by mitigating the fading signals as well as high data rates in multimedia services. However, the peak-to-average power ratio (PAPR) is a technical challenge that reduces the efficiency of RF power amplifiers. In this paper, we propose the combined Hadamard transform and modified meu-law companding transform method in order to lessen the effects of the peak-to-average power ratio of the
OFDM signal. Simulation results show that the proposed scheme reduces PAPR compared to other companding techniques as well as the Hadamard transform technique when used on its own.
An Overview : Peak to Average Power Ratio (PAPR) in OFDM system using some ne...Z AL Hashemi
An Overview : Peak to Average Power Ratio (PAPR) in OFDM system using some new PAPR techniques (with matlab code)
By
Zainab Saad Hadi AL-Hashemi
A graduate of University of Baghdad, College of Engineering Electronic & Communications Engineering Department
Analysis of Reduction of PAPR by Linear Predictive Coding in OFDM AnuragSingh1049
The major challenge in orthogonal frequency division multiplexing (OFDM) is to reduce high peak to average power ratio (PAPR) that leads to non linear distortion for the application of high power amplifier. PAPR is defined as the ratio between the maximum instantaneous power and its average power. In this paper, we have presented new PAPR reduction technique to reduce peak to average power ratio using Linear predicting coding (LPC) in OFDM system. In this paper, proposed technique show the significant reduction in PAPR without any harmful degradation in power spectral density (PSD), computational complexity (CC) and performance error of the system. This proposed method can be applied for any number of subcarrier and independent of modulation scheme under Additive White Gaussian Noise (AWGN) channel.
Performance improvement for papr reduction in lte downlink system with ellipt...IJCNCJournal
This paper is concerned with the performance improvement of PAPR reduction of orthogonal frequency division multiplexing (OFDM) signal using amplitude clipping & filtering based design. Note that OFDM is one of the well adept multi-carrier multiplexing transmission scheme which has been implemented in long term evolution (LTE) downlink. Nonetheless peak to average power ratio (PAPR) is the more rattling problem with OFDM, consequently in this paper a reduction procedure of the PAPR by using amplitude clipping and filtering is proposed. Here we used IIR bandpass elliptic filter after amplitude clipping to
reduce the PAPR. The performance of the system in terms of bit error rate (BER) is also canvased as a new
filter based clipping method. Our results show that the proposed methodology of clipping method with the
IIR elliptic band pass filter significantly reduces the PAPR value.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
A PAPR Reduction for OFDM Signals Based on Self-Adaptive Multipopulation DE a...IJECEIAES
One of major drawbacks of orthogonal frequency division multiplexing (OFDM) systems is the high peak-to-average power ratio (PAPR). A signal with high PAPR leads to nonlinear distortion caused mainly by power amplifiers in wireless transmitters. Partial transmit sequence (PTS) is one of the most attractive methods to reduce the PAPR in OFDM systems. It achieves considerable PAPR reduction without distortion, but it requires an exhaustive search over all the combinations of the given phase factors, which results in a computational complexity that increases exponentially with the number of partitions. For this optimization problem, we propose in this paper a suboptimal PTS method based on the self-adaptive multipopulation differential evolution algorithm (SAMDE). The self adaptation of control parameters and structured population, is able to obtain high quality solutions with low computational cost by evolving each sub-population of individuals over successive generations.
Joint Timing and Frequency Synchronization in OFDMidescitation
With the advent of OFDM for WLAN
communications, as exemplified by IEEE 802.11a, it has become
imperative to have efficient and reliable synchronization
algorithms for OFDM WLAN receivers. The main challenges
with synchronization deal with the frequency offset and delay
spread introduced by the wireless channel. In this paper,
research is done into OFDM timing synchronization and
frequency synchronization techniques.
CS Based Channel Estimation for OFDM Systems under Long Delay Channels Using ...IJERA Editor
Orthogonal frequency division multiplexing (OFDM) is a technique which are used in the next-generation wireless communication. Channel estimation in the OFDM technique is one of the big challenges, ever since high-resolution channel estimation can significantly improve the equalization at the receiver and consequently enhance the communication performances. Channel computation using superimposed pilot sequences is also a fully new area, idea for using superimposed pilot sequences has been proposed by various authors for different applications. In this paper, we are introduced a high accurate, low complexity compressive sensing (CS) based channel estimation namely Auxiliary information based Subspace Pursuit (ASP) in TFT-OFDM systems. ASP based channel estimation in TFT-OFDM system is based on two steps. First is, by exploiting the signal structure of recently proposed TDM-OFDM scheme, the supporting channel information is obtained. Second is, we propose the supporting information based subspace pursuit (SP) algorithm to use a very small amount of frequency domain pilots embedded in the OFDM block used for the exact channel estimation. Moreover, the obtained auxiliary channel information is adopted to reduce the complexity of the conventional SP algorithm. Simulation results demonstrate a important reduction of the number of pilots relative to least-squares channel estimation and supporting high-order modulations like 256 QAM.
Performance analysis for power-splitting energy harvesting based two-way full...TELKOMNIKA JOURNAL
Energy harvesting relay network is considered as the promising solution for a wireless
communication network in our time. In this research, we present and demonstrate the system performance
of the energy harvesting based two-way full-duplex relaying network over Nakagami-m fading
environment. Firstly, we propose the analytical expressions of the achievable throughput and outage
probability of the proposed system. In the second step, the effect of various system parameters on
the system performance is presented and investigated. In the final step, the analytical results are also
demonstrated by Monte-Carlo simulation. The numerical results demonstrated and convinced
the analytical and the simulation results are agreed with each other.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Peak to Average Power Ratio Performance of a 16-QAM/OFDM System with Partial ...IOSR Journals
Abstract : Orthogonal Frequency Division Multiplexing is a spectral efficient transmission format. But it suffers from the problem of high Peak to Average Power Ratio. This high Peak to Average Power Ratio leads the power amplifier into saturation and results in non-linear distortion at the output of power amplifier. Different peak to average power ratio reduction techniques are available in literature. This paper computes the performance of partial transmit scheme, which is one of the important peak to average power ratio reduction technique Keywords: Orthogonal Frequency Division Multiplexing, Partial Transmit Sequence, Peak to Average Power Ratio, Power Amplifier, Scrambling Techniques.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
PAPR REDUCTION OF OFDM SIGNAL BY USING COMBINED HADAMARD AND MODIFIED MEU-LAW...IJCNCJournal
Orthogonal frequency division multiplexing (OFDM) is a technique which gives high quality of service (QOS) to the users by mitigating the fading signals as well as high data rates in multimedia services. However, the peak-to-average power ratio (PAPR) is a technical challenge that reduces the efficiency of RF power amplifiers. In this paper, we propose the combined Hadamard transform and modified meu-law companding transform method in order to lessen the effects of the peak-to-average power ratio of the
OFDM signal. Simulation results show that the proposed scheme reduces PAPR compared to other companding techniques as well as the Hadamard transform technique when used on its own.
An Overview : Peak to Average Power Ratio (PAPR) in OFDM system using some ne...Z AL Hashemi
An Overview : Peak to Average Power Ratio (PAPR) in OFDM system using some new PAPR techniques (with matlab code)
By
Zainab Saad Hadi AL-Hashemi
A graduate of University of Baghdad, College of Engineering Electronic & Communications Engineering Department
Analysis of Reduction of PAPR by Linear Predictive Coding in OFDM AnuragSingh1049
The major challenge in orthogonal frequency division multiplexing (OFDM) is to reduce high peak to average power ratio (PAPR) that leads to non linear distortion for the application of high power amplifier. PAPR is defined as the ratio between the maximum instantaneous power and its average power. In this paper, we have presented new PAPR reduction technique to reduce peak to average power ratio using Linear predicting coding (LPC) in OFDM system. In this paper, proposed technique show the significant reduction in PAPR without any harmful degradation in power spectral density (PSD), computational complexity (CC) and performance error of the system. This proposed method can be applied for any number of subcarrier and independent of modulation scheme under Additive White Gaussian Noise (AWGN) channel.
Performance improvement for papr reduction in lte downlink system with ellipt...IJCNCJournal
This paper is concerned with the performance improvement of PAPR reduction of orthogonal frequency division multiplexing (OFDM) signal using amplitude clipping & filtering based design. Note that OFDM is one of the well adept multi-carrier multiplexing transmission scheme which has been implemented in long term evolution (LTE) downlink. Nonetheless peak to average power ratio (PAPR) is the more rattling problem with OFDM, consequently in this paper a reduction procedure of the PAPR by using amplitude clipping and filtering is proposed. Here we used IIR bandpass elliptic filter after amplitude clipping to
reduce the PAPR. The performance of the system in terms of bit error rate (BER) is also canvased as a new
filter based clipping method. Our results show that the proposed methodology of clipping method with the
IIR elliptic band pass filter significantly reduces the PAPR value.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
A PAPR Reduction for OFDM Signals Based on Self-Adaptive Multipopulation DE a...IJECEIAES
One of major drawbacks of orthogonal frequency division multiplexing (OFDM) systems is the high peak-to-average power ratio (PAPR). A signal with high PAPR leads to nonlinear distortion caused mainly by power amplifiers in wireless transmitters. Partial transmit sequence (PTS) is one of the most attractive methods to reduce the PAPR in OFDM systems. It achieves considerable PAPR reduction without distortion, but it requires an exhaustive search over all the combinations of the given phase factors, which results in a computational complexity that increases exponentially with the number of partitions. For this optimization problem, we propose in this paper a suboptimal PTS method based on the self-adaptive multipopulation differential evolution algorithm (SAMDE). The self adaptation of control parameters and structured population, is able to obtain high quality solutions with low computational cost by evolving each sub-population of individuals over successive generations.
Joint Timing and Frequency Synchronization in OFDMidescitation
With the advent of OFDM for WLAN
communications, as exemplified by IEEE 802.11a, it has become
imperative to have efficient and reliable synchronization
algorithms for OFDM WLAN receivers. The main challenges
with synchronization deal with the frequency offset and delay
spread introduced by the wireless channel. In this paper,
research is done into OFDM timing synchronization and
frequency synchronization techniques.
CS Based Channel Estimation for OFDM Systems under Long Delay Channels Using ...IJERA Editor
Orthogonal frequency division multiplexing (OFDM) is a technique which are used in the next-generation wireless communication. Channel estimation in the OFDM technique is one of the big challenges, ever since high-resolution channel estimation can significantly improve the equalization at the receiver and consequently enhance the communication performances. Channel computation using superimposed pilot sequences is also a fully new area, idea for using superimposed pilot sequences has been proposed by various authors for different applications. In this paper, we are introduced a high accurate, low complexity compressive sensing (CS) based channel estimation namely Auxiliary information based Subspace Pursuit (ASP) in TFT-OFDM systems. ASP based channel estimation in TFT-OFDM system is based on two steps. First is, by exploiting the signal structure of recently proposed TDM-OFDM scheme, the supporting channel information is obtained. Second is, we propose the supporting information based subspace pursuit (SP) algorithm to use a very small amount of frequency domain pilots embedded in the OFDM block used for the exact channel estimation. Moreover, the obtained auxiliary channel information is adopted to reduce the complexity of the conventional SP algorithm. Simulation results demonstrate a important reduction of the number of pilots relative to least-squares channel estimation and supporting high-order modulations like 256 QAM.
Performance analysis for power-splitting energy harvesting based two-way full...TELKOMNIKA JOURNAL
Energy harvesting relay network is considered as the promising solution for a wireless
communication network in our time. In this research, we present and demonstrate the system performance
of the energy harvesting based two-way full-duplex relaying network over Nakagami-m fading
environment. Firstly, we propose the analytical expressions of the achievable throughput and outage
probability of the proposed system. In the second step, the effect of various system parameters on
the system performance is presented and investigated. In the final step, the analytical results are also
demonstrated by Monte-Carlo simulation. The numerical results demonstrated and convinced
the analytical and the simulation results are agreed with each other.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Peak to Average Power Ratio Performance of a 16-QAM/OFDM System with Partial ...IOSR Journals
Abstract : Orthogonal Frequency Division Multiplexing is a spectral efficient transmission format. But it suffers from the problem of high Peak to Average Power Ratio. This high Peak to Average Power Ratio leads the power amplifier into saturation and results in non-linear distortion at the output of power amplifier. Different peak to average power ratio reduction techniques are available in literature. This paper computes the performance of partial transmit scheme, which is one of the important peak to average power ratio reduction technique Keywords: Orthogonal Frequency Division Multiplexing, Partial Transmit Sequence, Peak to Average Power Ratio, Power Amplifier, Scrambling Techniques.
Demystifying The Marketing on Vendor NeutralityHCMWorks
There has been a growing trend of having procurement and sourcing department oversight and/or involvement in the due diligence process of reviewing and selecting Recruitment Process Outsourcing companies. This presentation will focus on the importance for organizations to still involve key stakeholders and business users of recruitment process oursourcing versus simply “turning over the keys” to procurement, possibly resulting in a price-only focused process.
Low Peak to Average Power Ratio and High Spectral Efficiency Using Selective ...theijes
A low complexity peak to average power ratio (PAPR) reduction scheme for orthogonal frequency division multiplexing (OFDM) systems is proposed. All pass filters technique used PAPR is reduction but small amount of reduction, So use Selective Mapping (SLM) technique reduce PAPR and SNR increases.
Comparative Analysis of PAPR Reduction Techniques in OFDM Using Precoding Tec...IJSRD
In this modern era, Orthogonal Frequency Division Multiplexing (OFDM) has been proved to be an explicit promising technique for wired and wireless systems because of its several advantages like high spectral efficiency, robustness against frequency selective fading, relatively simple receiver implementation etc. Besides having a number of advantages OFDM suffers from few disadvantages like high Peak to Average Power Ratio (PAPR), Intercarrier Interference (ICI), Intersymbol Interference (ISI) etc. These detrimental effects, if not compensated properly and timely, can result in system performance degradation. This paper mainly concentrates on reduction of PAPR.A comparisons have been made between various precoding techniques against conventional OFDM.
Comparative Analysis of PAPR Reduction Techniques in OFDM Using Precoding Tec...IJSRD
In this modern era, Orthogonal Frequency Division Multiplexing (OFDM) has been proved to be an explicit promising technique for wired and wireless systems because of its several advantages like high spectral efficiency, robustness against frequency selective fading, relatively simple receiver implementation etc. Besides having a number of advantages OFDM suffers from few disadvantages like high Peak to Average Power Ratio (PAPR), Intercarrier Interference (ICI), Intersymbol Interference (ISI) etc. These detrimental effects, if not compensated properly and timely, can result in system performance degradation. This paper mainly concentrates on reduction of PAPR.A comparisons have been made between various precoding techniques against conventional OFDM.
A low complexity partial transmit sequence scheme for better papr reduction i...eSAT Journals
Abstract The main drawback of OFDM system is the high Peak to Average Power Ratio (PAPR) of the transmitted signals. Partial transmit sequence scheme is a promising algorithm to reduce the peak-to-average power ratio (PAPR) in orthogonal frequency division multiplexing (OFDM). The Partial Transmit Sequence (PTS) consist of several inverse fast Fourier transform (IFFT) operations and complicated calculations to obtain optimum phase sequence which results in increasing the computational complexity of PTS. A phase sequence applied to the PTS Scheme reduces its complexity but at the expense of slight degradation in PAPR reduction. In this paper, for further reduction of PAPR the peak clipping of the OFDM signal is introduced along with the PTS with new phase sequence scheme. Since clipping is one of the simplest techniques of PAPR reduction, it does not increase the complexity of the system much and a better PAPR reduction is obtained with the combined effect of clipping and PTS with New Phase Sequence. But the clipping technique introduce some distortion in the signal, however peak clipping of signal below a particular threshold can maintain the BER in the tolerable range. The clipping threshold selected will be different for different OFDM systems. Index Terms: OFDM, Peak to Average Power Ratio (PAPR), Partial Transmit Sequence (PTS), Clipping.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
PAPR Reduction in OFDM using Active and Non-Active ChannelsIOSR Journals
Abstract : According to the request of advance communication field there should be high data rate in addition to both power efficiency and lower bit error rate. This request of high data rate can be achieved by the multi carrier modulation scheme using the OFDM technique. But the great drawback of the OFDM technique is its high peak to average power ratio (PAPR). High PAPR reduces OFDM signals by driving the analog amplifier to work in the nonlinear region, changing this way the signal and making the amplifier to consume more power. To reduce the PAPR methods exist which adjust or present new signals to battle large signal peaks. The methods which use data carrying channels are called active channel methods and which use redundant channel are called non active channel methods. This work deals with reduction of the PAPR of OFDM signal using both Active and Non Active Channels. Clipping technique has been applied to active channels and Tone reservation has been applied to Non Active Channels. By using both channels we can get considerable reduction in PAPR. Keywords:Orthogonal Frequency Division Multiplexing (OFDM), Peak to Average Power Ratio (PAPR), Power Amplifier (PA).
AN OVERVIEW OF PEAK-TO-AVERAGE POWER RATIO REDUCTION TECHNIQUES FOR OFDM SIGNALSijmnct
OFDM (Orthogonal Frequency Division Multiplexing) has been widely adopted for high data rate wireless
communication systems due to its advantages such as extraordinary spectral efficiency, robustness to
channel fading and better QoS (Quality of Service) performance for multiple users. However, some
challenging issues are still unresolved in OFDM systems. One of the issues is the high PAPR (peak-toaverage
power ratio), which results in nonlinearity in power amplifiers, and causes out of band radiation
and in band distortion. This paper reviews some conventional PAPR reduction techniques and their
modifications to achieve better PAPR performance. Advantages and disadvantages of each technique are
discussed in detail. And comparisons between different techniques are also presented. Finally, this paper
makes a prospect forecast about the direction for further researches in the area of PAPR reduction for
OFDM signals
Comparative performance analysis of different modulation techniques for papr ...IJCNCJournal
One of the most important multi-carrier tran
smission techniques used in the latest wireless com
munication
arena is known as Orthogonal Frequency Division Mul
tiplexing (OFDM). It has several characteristics
such as providing greater immunity to multipath fad
ing & impulse noise, eliminating Inter Symbol
Interference (ISI) & Inter Carrier Interference (IC
I) using a guard interval known as Cyclic Prefix (C
P). A
regular difficulty of OFDM signal is high peak to a
verage power ratio (PAPR) which is defined as the r
atio
of the peak power to the average power of OFDM Sign
al. An improved design of amplitude clipping &
filtering technique of us previously reduced signif
icant amount of PAPR with slightly increase bit err
or rate
(BER) compare to an existing method in case of Quad
rature Phase Shift Keying (QPSK) & Quadrature
Amplitude Modulation (QAM). This paper investigates
a comparative performance analysis of the differen
t
higher order modulation techniques on that design.
Impact of Clipping and Filtering on Peak to Average Power Ratio of OFDM Systemijsrd.com
Orthogonal Frequency Division Multiplexing (OFDM) is an emerging field of research in the field of 4G broadband wireless communications due to its robustness against multipath fading and relatively simple implementation. Peak to Average Power Ratio (PAPR) is the limiting factor for an OFDM system as it consists of large number of independent subcarriers as a result of which the amplitude of such a signal can have high peak values which degrades the system performance. Such a signal when amplified by a Power Amplifier without processing results spectral regrowth and intermodulation among subcarrier. Hence this non linearity destroys the orthogonally of the OFDM signal and introduces out-of-band radiation and in band distortions causing significant performance degradation. The clipping and filtering method is analysed which is an efficient and simple method to reduce the PAPR. We have shown the effects of clipping and filtering on the performance of OFDM, including the power spectral density, the crest factor, and the bit-error rate.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
A Hybrid VLM Preceded SLM Technique Using Clipping and Filtering Method for P...IJERA Editor
MIMO-OFDM is an attractive interface for the next generation WLANs, WMAN, 4G and 5G mobile cellular
systems. However the performance of the MIMO-OFDM systems is affected by Peak to Average Power Ratio
(PAPR). PAPR is the main disadvantage associated with the MIMO-OFDM systems. So far, many techniques
have been proposed to reduce the value of PAPR but high PAPR for MIMO-OFDM systems is still a demanding
area and a different issue.In this paper, a hybrid VLM precoded SLM scheme using Clipping & Filtering has
been proposed to reduce PAPR in MIMO-OFDM systems. And it has been observed that the proposed scheme
has achieved a significant gain in PAPR reduction without increasing the system complexity and affecting the
error performance of the system.
Bessel Companding Transform for reducing PAPR, OBI and BER in OFDM SystemsIOSR Journals
Abstract : Orthogonal Frequency division multiplexing (OFDM) is a very popular technique in wireless communications which provides excellent robustness to channel fading and immune to interference. OFDM is one of a popular modulation technique for transmitting large amounts of digital data over radio carriers. One of the major problems that had been observed in this is the Peak-To Average power Ratio (PAPR). PAPR is a distortion that had occurred due to large number of sub carriers that are used in OFDM for modulating the digital data. Many techniques were available to reduce the PAPR in OFDM systems, among them the companding technique can be used to enhance the OFDM transmission performance by decreasing the PAPR effectively and hence BER. Here we proposed “Bessel Companding Algorithm” to reduce this significant drawback in OFDM Systems. Keywords : Orthogonal Frequency Division Multiplexing (OFDM), peak to average power ratio (PAPR), bit error rate (BER), Out Band Interference (OBI), Additive White Gaussian Noise (AWGN), Bessel Companding Algorithm, Quadrature Amplitude Modulation (QAM) and Multi Carrier Modulation (MCM).
Hardware Implementation of OFDM system to reduce PAPR using Selective Level M...IOSR Journals
Abstract : OFDM is a modulation as well as multiplexing technique which is widely used in various high speed mobile and wireless communication systems because of its capacity of ensuring high level robustness against interference. In this paper the design and implementation of OFDM system along with SLM implementation to reduce PAPR[6]is illustrated and a detailed simulation of the OFDM system with 16-QAM. OFDM transceiver is implemented using FPGA Spartan6 kit. The hardware results show a detailed study of RTL schematics and Test Bench. In this paper, the software simulation results show 2dB reduction in the peaks. Keywords - Field Programmable Gate Array, Matlab Simulink, Orthogonal Frequency Division Multiplexing , Peak-to-Average Power Ratio, Selective level Mapping and Xilinx
Similar to Computationally Efficient Algorithm for Reducing PAPR in OFDM using Null Subcarriers (20)
Now-a-days, Internet has become an important part of human’s life, a person
can shop, invest, and perform all the banking task online. Almost, all the organizations have
their own website, where customer can perform all the task like shopping, they only have to
provide their credit card details. Online banking and e-commerce organizations have been
experiencing the increase in credit card transaction and other modes of on-line transaction.
Due to this credit card fraud becomes a very popular issue for credit card industry, it causes
many financial losses for customer and also for the organization. Many techniques like
Decision Tree, Neural Networks, Genetic Algorithm based on modern techniques like
Artificial Intelligence, Machine Learning, and Fuzzy Logic have been already developed for
credit card fraud detection. In this paper, an evolutionary Simulated Annealing algorithm is
used to train the Neural Networks for Credit Card fraud detection in real-time scenario.
This paper shows how this technique can be used for credit card fraud detection and
present all the detailed experimental results found when using this technique on real world
financial data (data are taken from UCI repository) to show the effectiveness of this
technique. The algorithm used in this paper are likely beneficial for the organizations and
for individual users in terms of cost and time efficiency. Still there are many cases which are
misclassified i.e. A genuine customer is classified as fraud customer or vise-versa.
Wireless sensor networks (WSN) have been widely used in various applications.
In these networks nodes collect data from the attached sensors and send their data to a base
station. However, nodes in WSN have limited power supply in form of battery so the nodes
are expected to minimize energy consumption in order to maximize the lifetime of WSN. A
number of techniques have been proposed in the literature to reduce the energy
consumption significantly. In this paper, we propose a new clustering based technique
which is a modification of the popular LEACH algorithm. In this technique, first cluster
heads are elected using the improved LEACH algorithm as usual, and then a cluster of
nodes is formed based on the distance between node and cluster head. Finally, data from
node is transferred to cluster head. Cluster heads forward data, after applying aggregation,
to the cluster head that is closer to it than sink in forward direction or directly to the sink.
This reduction in distance travelled improves the performance over LEACH algorithm
significantly.
The next generation wireless networks comprises of mobile users moving
between heterogeneous networks, using terminals with multiple access interfaces and
services. The most important issue in such environment is ABC (Always Best Connected) i.e.
allowing the best connectivity to applications anywhere at any time. For always best
connectivity requirement various vertical handover strategies for decision making have
been proposed. This paper provides an overview of the most interesting and recent
strategies.
This paper presents the design and performance comparison of a two stage
operational amplifier topology using CMOS and BiCMOS technology. This conventional op
amp circuit was designed by using RF model of BSIM3V3 in 0.6 μm CMOS technology and
0.35 μm BiCMOS technology. Both the op amp circuits were designed and simulated,
analyzed and performance parameters are compared. The performance parameters such as
gain, phase margin, CMRR, PSRR, power consumption etc achieved are compared. Finally,
we conclude the suitability of CMOS technology over BiCMOS technology for low power
RF design.
In Cognitive Radio Networks (CRN), Cooperative Spectrum Sensing (CSS) is
used to improve performance of spectrum sensing techniques used for detection of licensed
(Primary) user’s signal. In CSS, the spectrum sensing information from multiple unlicensed
(Secondary) users are combined to take final decision about presence of primary signal. The
mixing techniques used to generate final decision about presence of PU’s signal are also
called as Fusion techniques / rules. The fusion techniques are further classified as data
fusion and decision fusion techniques. In data fusion technique all the secondary users
(SUs) share their raw information of spectrum detection like detected energy or other
statistical information, while in decision fusion technique all the SUs take their local
decisions and share the decision by sending ‘0’ or ‘1’ corresponding to absence and presence
of PU’s signal respectively. The rules used in decision fusion techniques are OR rule, AND
rule and K-out-of-N rule. The CSS is further classified as distributed CSS and centralized
CSS. In distributed CSS all the SUs share the spectrum detection information with each
other and by mixing the shared information; all the SUs take final decision individually. In
centralized CSS all the SUs send their detected information to a secondary base station /
central unit which combines the shared information and takes final decision. The secondary
base station shares the final decision with all the SUs in the CRN. This paper covers
overview of information fusion methods used for CSS and analysis of decision fusion rules
with simulation results.
ZigBee has been developed to support lower data rates and low power consuming
applications. This paper targets to analyze various parameters of ZigBee physical (PHY).
Performance of ZigBee PHY is evaluated on the basis of energy consumption in
transmitting and receiving mode and throughput. Effect of variation in network size is
studied on these performance attributes. Some modulation schemes are also compared and
the best modulation scheme is suggested with tradeoffs between different performance
metrics.
This paper gives a brief idea of the moving objects tracking and its application.
In sport it is challenging to track and detect motion of players in video frames. Task
represents optical flow analysis to do motion detection and particle filter to track players
and taking consideration of regions with movement of players in sports video. Optical flow
vector calculation gives motion of players in video frame. This paper presents improved
Luacs Kanade algorithm explained for optical flow computation for large displacement and
more accuracy in motion estimation.
A rapid progress is seen in the field of robotics both in educational and industrial
automation sectors. The Robotics education in particular is gaining technological advances
and providing more learning opportunities. In automotive sector, there is a necessity and
demand to automate daily human activities by robot. With such an advancement and
demand for robotics, the realization of a popular computer game will help students to learn
and acquire skills in the field of robotics. The computer game such as Pacman offers
challenges on both software and hardware fronts. In software, it provides challenges in
developing algorithms for a robot to escape from the pool of attacking robots and to develop
algorithms for multiple ghost robots to attack the Pacman. On the hardware front, it
provides a challenge to integrate various systems to realize the game. This project aims to
demonstrate the pacman game in real world as well as in simulation. For simulation
purpose Player/Stage is used to develop single-client and multi-client architectures. The
multi- client architecture in player/stage uses one global simulation proxy to which all the
robot models are connected. This reduces the overhead to manage multiple robots proxy.
The single-client architecture enables only two robot models to connect to the simulation
proxy. Multi-client approach offers flexibility to add sensors to each port which will be used
distinctly by the client attached to the respective robot. The robots are named as Pacman
and Ghosts, which try to escape and attack respectively. Use of Network Camera has been
done to detect the global positions of the robots and data is shared through inter-process
communication.
In Content-Based Image Retrieval (CBIR) systems, the visual contents of the
images in the database are took out and represented by multi-dimensional characteristic
vectors. A well known CBIR system that retrieves images by unsupervised method known
as cluster based image retrieval system. For enhancing the performance and retrieval rate
of CBIR system, we fuse the visual contents of an image. Recently, we developed two
cluster-based CBIR systems by fusing the scores of two visual contents of an image. In this
paper, we analyzed the performance of the two recommended CBIR systems at different
levels of precision using images of varying sizes and resolutions. We also compared the
performance of the recommended systems with that of the other two existing CBIR systems
namely UFM and CLUE. Experimentally, we find that the recommended systems
outperform the other two existing systems and one recommended system also comparatively
performed better in every resolution of image.
Information Systems and Networks are subjected to electronic attacks. When
network attacks hit, organizations are thrown into crisis mode. From the IT department to
call centers, to the board room and beyond, all are fraught with danger until the situation is
under control. Traditional methods which are used to overcome these threats (e.g. firewall,
antivirus software, password protection etc.) do not provide complete security to the system.
This encourages the researchers to develop an Intrusion Detection System which is capable
of detecting and responding to such events. This review paper presents a comprehensive
study of Genetic Algorithm (GA) based Intrusion Detection System (IDS). It provides a
brief overview of rule-based IDS, elaborates the implementation issues of Genetic Algorithm
and also presents a comparative analysis of existing studies.
Step by step operations by which we make a group of objects in which attributes
of all the objects are nearly similar, known as clustering. So, a cluster is a collection of
objects that acquire nearly same attribute values. The property of an object in a cluster is
similar to other objects in same cluster but different with objects of other clusters.
Clustering is used in wide range of applications like pattern recognition, image processing,
data analysis, machine learning etc. Nowadays, more attention has been put on categorical
data rather than numerical data. Where, the range of numerical attributes organizes in a
class like small, medium, high, and so on. There is wide range of algorithm that used to
make clusters of given categorical data. Our approach is to enhance the working on well-
known clustering algorithm k-modes to improve accuracy of algorithm. We proposed a new
approach named “High Accuracy Clustering Algorithm for Categorical datasets”.
Brain tumor is a malformed growth of cells within brain which may be
cancerous or non-cancerous. The term ‘malformed’ indicates the existence of tumor. The
tumor may be benign or malignant and it needs medical support for further classification.
Brain tumor must be detected, diagnosed and evaluated in earliest stage. The medical
problems become grave if tumor is detected at the later stage. Out of various technologies
available for diagnosis of brain tumor, MRI is the preferred technology which enables the
diagnosis and evaluation of brain tumor. The current work presents various clustering
techniques that are employed to detect brain tumor. The classification involves classification
of images into normal and malformed (if detected the tumor). The algorithm deals with
steps such as preprocessing, segmentation, feature extraction and classification of MR brain
images. Finally, the confirmatory step is specifying the tumor area by technique called
region of interest.
A Proxy signature scheme enables a proxy signer to sign a message on behalf of
the original signer. In this paper, we propose ECDLP based solution for chen et. al [1]
scheme. We describe efficient and secure Proxy multi signature scheme that satisfy all the
proxy requirements and require only elliptic curve multiplication and elliptic curve addition
which needs less computation overhead compared to modular exponentiations also our
scheme is withstand against original signer forgery and public key substitution attack.
Water marking has been proposed as a method to enhance data security. Text
water marking requires extreme care when embedding additional data within the images
because the additional information must not affect the image quality. Digital water marking
is a method through which we can authenticate images, videos and even texts. Add text
water mark and image water mark to your photos or animated image, protect your
copyright avoid unauthorized use. Water marking functions are not only authentication, but
also protection for such documents against malicious intentions to change such documents
or even claim the rights of such documents. Water marking scheme that hides water
marking in method, not affect the image quality. In this paper method of hiding a data using
LSB replacement technique is proposed.
Today among various medium of data transmission or storage our sensitive data
are not secured with a third-party, that we used to take help of. Cryptography plays an
important role in securing our data from malicious attack. This paper present a partial
image encryption based on bit-planes permutation using Peter De Jong chaotic map for
secure image transmission and storage. The proposed partial image encryption is a raw data
encryption method where bits of some bit-planes are shuffled among other bit-planes based
on chaotic maps proposed by Peter De Jong. By using the chaotic behavior of the Peter De
Jong map the position of all the bit-planes are permuted. The result of the several
experimental, correlation analysis and sensitivity test shows that the proposed image
encryption scheme provides an efficient and secure way for real-time image encryption and
decryption.
This paper presents a survey of Dependency Analysis of Service Oriented
Architecture (SOA) based systems. SOA presents newer aspects of dependency analysis due
to its different architectural style and programming paradigm. This paper surveys the
previous work taken on dependency analysis of service oriented systems. This study shows
the strengths and weaknesses of current approaches and tools available for dependency
analysis task in context of SOA. The main motivation of this work is to summarize the
recent approaches in this field of research, identify major issue and challenges in
dependency analysis of SOA based systems and motivate further research on this topic.
In this paper, proposed a novel implementation of a Soft-Core system using
micro-blaze processor with virtex-5 FPGA. Till now Hard-Core processors are used in
FPGA processor cores. Hard cores are a fixed gate-level IP functions within the FPGA
fabrics. Now the proposed processor is Soft-Core Processor, this is a microprocessor fully
described in software, usually in an HDL. This can be implemented by using EDK tool. In
this paper, developed a system which is having a micro-blaze processor is the combination
of both hardware & Software. By using this system, user can control and communicate all
the peripherals which are in the supported board by using Xilinx platform to develop an
embedded system. Implementing of Soft-Core process system with different peripherals like
UART interface, SPA flash interface, SRAM interface has to be designed using Xilinx
Embedded Development Kit (EDK) tools.
The article presents a simple algorithm to construct minimum spanning tree and
to find shortest path between pair of vertices in a graph. Our illustration includes the proof
of termination. The complexity analysis and simulation results have also been included.
Wimax technology has reshaped the framework of broadband wireless internet
service. It provides the internet service to unconnected or detached areas such as east South
Africa, rural areas of America and Asia region. Full duplex helpers employed with one of
the relay stations selection and indexing method that is Randomized Distributed Space Time
are used to expand the coverage area of primary Wimax station. The basic problem was
identified at cell edge due to weather conditions (rain, fog), insertion of destruction because
of multiple paths in the same communication channel and due to interference created by
other users in that communication. It is impractical task for the receiver station to decode
the transmitted signal successfully at the cell edges, which increases the high packet loss and
retransmissions. But Wimax is a outstanding technology which is used for improving the
quality of internet service and also it offers various services like Voice over Internet
Protocol, Video conferencing and Multimedia broadcast etc where a little delay in packet
transmission can cause a big loss in the communication. Even setup and initialization of
another Wimax station nearer to each other is not a good alternate, where any mobile
station can easily handover to another base station if it gets a strong signal from other one.
But in rural areas, for few numbers of customers, installation of base station nearer to each
other is costlier task. In this review article, we present a scheme using R-DSTC technique to
choose and select helpers (relay nodes) randomly to expand the coverage area and help to
mobile station as a helper to provide secure communication with base station. In this work,
we use full duplex helpers for better utilization of bandwidth.
Radio Frequency identification (RFID) technology has become emerging
technique for tracking and items identification. Depend upon the function; various RFID
technologies could be used. Drawback of passive RFID technology, associated to the range
of reading tags and assurance in difficult environmental condition, puts boundaries on
performance in the real life situation [1]. To improve the range of reading tags and
assurance, we consider implementing active backscattering tag technology. For making
mobiles of multiple radio standards in 4G network; the Software Defined Radio (SDR)
technology is used. Restrictions in Existing RFID technologies and SDR technology, can be
eliminated by the development and implementation of the Software Defined Radio (SDR)
active backscattering tag compatible with the EPC global UHF Class 1 Generation 2 (Gen2)
RFID standard. Such technology can be used for many of applications and services.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.