This document provides an overview of a seminar report on practical training completed at the construction site of a stadium in S.N. Puram Sector-E, Kota. The report was submitted in partial fulfillment of a Bachelor of Technology degree in Civil Engineering from Rajasthan Technical University, Kota. It includes sections on the history and scope of stadium design, site selection, functional analysis, field design considerations, seating design factors, and conclusions from the practical training experience.
The document discusses the role of the Urban Improvement Trust (UIT) in Kota, India. It was established in 1970 by the government to achieve urban development objectives. The UIT is responsible for the overall development of Kota city, including designing the urban pattern, acquiring land, and planning residential and commercial schemes. It also plans and develops sport facilities in the city, including acquiring land and constructing stadiums. The document then discusses considerations for stadium site selection and design, including the functional requirements and design of sports fields for activities like cricket.
The document provides requirements for indoor and outdoor sports facilities for a sports complex. For indoor spaces, it lists the number of courts or spaces needed for badminton, squash, skating, table tennis, gymnastics, and a multipurpose hall. Outdoors, it lists requirements for net baskets, football/cricket fields, lawn tennis courts, table tennis tables, basketball courts, volleyball courts, a swimming pool, and a running track. It also provides brief descriptions of facilities and designs for various indoor courts and structures like a cricket stadium.
The document discusses a thesis project report submitted by Shyam Sunder Singh for a proposed construction of a cricket stadium for Eastern Railway at Behala, Kolkata. It includes declarations by the student and certification by guides, as well as acknowledgements. The report will include chapters on the aims and objectives, site analysis, design concepts, details on cricket stadium standards, services, SWOT analysis, design elements, and conclusions.
The document provides information about requirements and design considerations for sports complexes. It discusses the components typically included in a sports complex like stadiums for different sports, indoor halls, swimming pools, and other facilities. It outlines basic requirements for sports complexes including spectator capacity and facilities for athletes. It also discusses factors to consider like orientation, sightlines, accessibility, and climate. Design guidelines are provided for different sports facilities and infrastructure like seating, lighting, and exits. Two case studies of existing sports complexes in India are also summarized.
it is the slide for the design of the cricket stadium.It consists of the literature and case studies of the various national and international stadium.It will obviously help you.
RAJIV GANDHI INTERNATIONAL AIRPORT HYDERABADAr.Farooqh A
The document summarizes the green initiatives at the Rajiv Gandhi International Airport in Hyderabad, India. It discusses how the airport has implemented various energy conservation practices, built a 273 hectare green belt, harvests 1.729 million cubic meters of rainwater annually, recycles solid waste, and treats wastewater. It also lists several certifications and awards received by the airport for its environmental management and conservation efforts.
brief of the structure of jln stadium .In terms of seating capacity, it is the fourth largest multipurpose stadium in India and the 51st largest in the world.
The document provides information on the planning and design of a sports complex, including:
1) Introduction on the types of facilities typically included in a sports complex like stadiums, pools, and gymnasiums.
2) Details on the types, sizes, and capacities of various sports facilities and ancillary spaces within the complex.
3) Guidance on site planning considerations like circulation, parking, and landscaping for a sports complex.
The document discusses the role of the Urban Improvement Trust (UIT) in Kota, India. It was established in 1970 by the government to achieve urban development objectives. The UIT is responsible for the overall development of Kota city, including designing the urban pattern, acquiring land, and planning residential and commercial schemes. It also plans and develops sport facilities in the city, including acquiring land and constructing stadiums. The document then discusses considerations for stadium site selection and design, including the functional requirements and design of sports fields for activities like cricket.
The document provides requirements for indoor and outdoor sports facilities for a sports complex. For indoor spaces, it lists the number of courts or spaces needed for badminton, squash, skating, table tennis, gymnastics, and a multipurpose hall. Outdoors, it lists requirements for net baskets, football/cricket fields, lawn tennis courts, table tennis tables, basketball courts, volleyball courts, a swimming pool, and a running track. It also provides brief descriptions of facilities and designs for various indoor courts and structures like a cricket stadium.
The document discusses a thesis project report submitted by Shyam Sunder Singh for a proposed construction of a cricket stadium for Eastern Railway at Behala, Kolkata. It includes declarations by the student and certification by guides, as well as acknowledgements. The report will include chapters on the aims and objectives, site analysis, design concepts, details on cricket stadium standards, services, SWOT analysis, design elements, and conclusions.
The document provides information about requirements and design considerations for sports complexes. It discusses the components typically included in a sports complex like stadiums for different sports, indoor halls, swimming pools, and other facilities. It outlines basic requirements for sports complexes including spectator capacity and facilities for athletes. It also discusses factors to consider like orientation, sightlines, accessibility, and climate. Design guidelines are provided for different sports facilities and infrastructure like seating, lighting, and exits. Two case studies of existing sports complexes in India are also summarized.
it is the slide for the design of the cricket stadium.It consists of the literature and case studies of the various national and international stadium.It will obviously help you.
RAJIV GANDHI INTERNATIONAL AIRPORT HYDERABADAr.Farooqh A
The document summarizes the green initiatives at the Rajiv Gandhi International Airport in Hyderabad, India. It discusses how the airport has implemented various energy conservation practices, built a 273 hectare green belt, harvests 1.729 million cubic meters of rainwater annually, recycles solid waste, and treats wastewater. It also lists several certifications and awards received by the airport for its environmental management and conservation efforts.
brief of the structure of jln stadium .In terms of seating capacity, it is the fourth largest multipurpose stadium in India and the 51st largest in the world.
The document provides information on the planning and design of a sports complex, including:
1) Introduction on the types of facilities typically included in a sports complex like stadiums, pools, and gymnasiums.
2) Details on the types, sizes, and capacities of various sports facilities and ancillary spaces within the complex.
3) Guidance on site planning considerations like circulation, parking, and landscaping for a sports complex.
The document describes a public housing development called CIDCO Housing in Belapur, Navi Mumbai built between 1985-1996. It consisted of over 1000 apartment units ranging in size from 20-100 square meters organized into clusters. The development aimed to create public, semi-public, and private spaces through its site planning and layout. It featured amenities like schools, shops, and open courtyards but lacked some facilities like markets, hospitals, and parking. Both positive and negative feedback is provided from current and past residents regarding aspects like leakage issues, security concerns, and lack of nearby amenities.
The document describes the Indira Paryavaran Bhawan building project in New Delhi, which aims to be a net zero energy green building. Some key points:
- The building has a 930kWp solar PV system, the largest rooftop system on a multi-story building in India, which meets the building's total energy demand.
- Energy efficiency measures like chilled beams, geothermal heat exchange via 180 deep boreholes, and high performance glass optimize energy performance and reduce cooling loads.
- Sustainable materials like fly ash concrete, AAC blocks, and jute-bamboo composites are used to reduce embodied energy.
- Water conservation strategies like rainwater harvesting and
The document discusses various cost-effective construction techniques that can be used in India to reduce building costs. Some techniques mentioned include using stabilized compressed earth blocks, fly ash bricks, rat-trap bond brickwork, filler slabs for roofs, and replacing concrete lintels with brick arches. Adopting these alternative materials and construction methods can save 15-40% on building costs while still providing durable structures. Proper selection of materials suited to the local area is important for developing cost-effective construction techniques.
The document provides information about TERI University located in New Delhi, India. It was established in 1998 and is spread over 2 acres of land. The campus was designed to be sustainable and energy efficient using techniques like passive solar design, daylighting, an earth air tunnel system for cooling, and rooftop solar panels. It aims to minimize its ecological footprint through sustainable design features and the use of renewable energy sources.
The document provides information about architectural practice and professional ethics in India. It discusses the key differences between a profession and a business, and notes that architecture is considered a profession in India. The history of architectural practice and education in India is covered, including the establishment of the first architecture school in 1913. The roles of regulatory bodies like the Council of Architecture and Indian Institute of Architects are explained. Common types of architectural practice structures like proprietorship, partnership and private companies are defined. Typical organization structures for architectural offices and methods for setting up and managing finances of an office are also outlined.
This document provides an overview of an upcoming webinar on decoding the Unified Development Control and Promotion Regulations (UDCPR). It includes an index of chapters that will be covered, with the name of the presenter for each chapter. The chapters include administration, development permission processes, land use classification, general land development requirements, building requirements, parking requirements, and special provisions. Definitions that will be important for understanding the content are also provided. The webinar aims to explain the provisions and requirements of the new UDCPR.
The document provides information about the Energy Research Institute (TERI) in Bangalore, India. It discusses the location, climate, introduction, orientation, and various passive design strategies used in the building. The building is oriented along an east-west axis with the northern side open to take advantage of glare-free light. Passive strategies include a double cavity wall on the south side for insulation, an atrium space with skylights to bring in natural light, and an earth air tunnel system for passive cooling and heating. The design aims to minimize energy usage through various architectural and passive design elements that respond to the local climate and environment.
Pentathlon Sports Center | Architecture Design standardsYasmine Bannoura
Modern Pentathlon center + Residential Building
Contents:
1. INTRODUCTION
2. COVERED HALL
POOL BUILDINGS
FENCING SPORT
SHOOTING RANGES
3. OUTDOOR SPORTS
EQUESTRIAN
SPRINT “RUNNING”
JAVELIN THROW
ARCHERY
4. PHYSICAL THERAPY ZONE
5. RESIDENTIAL ZONE & SERVICES
6. PLANNING STANDARDS
FOR SPORTS BUILDINGS
A Report on Urban Redevelopment which covers Introduction, Indicators of Redevelopment(Construction, Rehabilitation & Relocation), Local Study(Bangladesh), International Study of Redevelopment, Preservation aspect, and most important part of Redevelopment i.e. Methodology.
Aerocon Panels | Aerocon Blocks | Aadam EnterprisesUdayaraj K
1. Aerocon panels are prefabricated sandwich panels made of fiber reinforced cement sheets on both sides of a lightweight concrete core, providing a lightweight and durable solution for partitions, mezzanine floors, prefabricated structures, and more.
2. The panels have advantages of being fast to install due to their tongue and groove joint system and factory curing. They are strong, fire resistant, termite resistant, and provide acoustic and thermal insulation.
3. Aerocon panels can reduce construction costs by up to 20% due to their light weight and speed of installation compared to traditional construction. They also provide additional floor area of up to 5% by allowing thinner walls.
If you are looking to buy/sell/rent an apartment in Commonwealth Games Village then call us: 9717288533
Mail: info@guptarealty.in
We have a wide range of inventory in this complex. We have a professional approach towards our services in real estate.
CCTV Building, A Structural Design OverviewPeter Bach
The CCTV building is one of the several big Beijing Olympic projects, which houses the headquarters for the Chinese Central Television Network. Its design shows unique style, but great structural engineering challenges to overcome. The following presentation provides an overview of how these challenges were overcome. (Presented at Monash University, Department of Civil Engineering, August 2008).
This document presents information on green building assessment systems. It discusses the key principles of green building including efficient use of energy, water and resources, and protecting occupant health. It then describes the BREEAM assessment system, the first in the world, and provides examples of buildings that have achieved high BREEAM ratings, like PwC's London office which scored 96.31% and was the first to receive an "outstanding" rating. One Angel Square in Manchester scored 95.16% under BREEAM and featured innovations like a living wall and biodiesel-powered energy system.
PREFABRICATED CONSTRUCTION CASE STUDY: THE HEMISPHEREShivangi Saini
The document summarizes details about The Hemisphere housing project in Greater Noida, India. It describes the project as luxury villas equipped with modern amenities located on a 9-hole golf course. The apartments feature 3 units per floor with golf course views from all units. The structures use a precast construction method with prefabricated wall panels, columns, beams, and staircases that are assembled on site. Connection details are provided for walls, beams, slabs, and columns.
The document discusses the client and architect relationship and the importance of collaboration. It notes that collaboration matters more than just being a nice idea, and asks how collaboration can be achieved between the client and architect. The brief is important, but clients may not know what they need, as illustrated by a Henry Ford quote about developing cars rather than faster horses.
Design of Football Stadium - Design Project for Civil EngineersIndhumathi1134
Project covers the planning and design of Football Stadium, which includes the design of Staircase, Beam & Column manually done using IS:456-2000 & SP-16
This document provides details on the design of a sports complex located in Jamia Nagar, Delhi. It includes plans and sections for the table tennis hall as well as dimensions for other facilities. The complex contains an indoor stadium, two grounds for cricket and football, and three courts. The table tennis hall can accommodate 500 spectators and includes four playing tables, wooden flooring and paneling, and retractable seating along one wall. Dimensions and capacities are provided for the reception area, conference room, locker rooms, and other spaces within the complex.
Bamboo construction, Ferrocement, Wattle & Daub techniqueAzleen Kazi
A presentation on the constrcution techniques by Bamboo construction, Ferrocement, Wattle & Daub techniques, their applications and advantages disadvantages and site images
Class Project for PM class, Scenario Based Presentation. This presentation has some details based on a question. Overall it gives an idea about critical path of a project . I will soon post the question for more clarity . Many thanks for your time.
The document provides instructions for a stadium design project. Students must complete several drawings for their proposed stadium design by May 28th, including a sky view, arena views showing the seating and concourses, and concourse views. They will then present their proposals to be graded on clarity, explanation of their design decisions, and equal group participation. Today's task is for student groups to review their graded proposals, delegate drawing tasks among group members, and submit a paragraph summarizing their plan to complete the project drawings and presentation.
The document describes a public housing development called CIDCO Housing in Belapur, Navi Mumbai built between 1985-1996. It consisted of over 1000 apartment units ranging in size from 20-100 square meters organized into clusters. The development aimed to create public, semi-public, and private spaces through its site planning and layout. It featured amenities like schools, shops, and open courtyards but lacked some facilities like markets, hospitals, and parking. Both positive and negative feedback is provided from current and past residents regarding aspects like leakage issues, security concerns, and lack of nearby amenities.
The document describes the Indira Paryavaran Bhawan building project in New Delhi, which aims to be a net zero energy green building. Some key points:
- The building has a 930kWp solar PV system, the largest rooftop system on a multi-story building in India, which meets the building's total energy demand.
- Energy efficiency measures like chilled beams, geothermal heat exchange via 180 deep boreholes, and high performance glass optimize energy performance and reduce cooling loads.
- Sustainable materials like fly ash concrete, AAC blocks, and jute-bamboo composites are used to reduce embodied energy.
- Water conservation strategies like rainwater harvesting and
The document discusses various cost-effective construction techniques that can be used in India to reduce building costs. Some techniques mentioned include using stabilized compressed earth blocks, fly ash bricks, rat-trap bond brickwork, filler slabs for roofs, and replacing concrete lintels with brick arches. Adopting these alternative materials and construction methods can save 15-40% on building costs while still providing durable structures. Proper selection of materials suited to the local area is important for developing cost-effective construction techniques.
The document provides information about TERI University located in New Delhi, India. It was established in 1998 and is spread over 2 acres of land. The campus was designed to be sustainable and energy efficient using techniques like passive solar design, daylighting, an earth air tunnel system for cooling, and rooftop solar panels. It aims to minimize its ecological footprint through sustainable design features and the use of renewable energy sources.
The document provides information about architectural practice and professional ethics in India. It discusses the key differences between a profession and a business, and notes that architecture is considered a profession in India. The history of architectural practice and education in India is covered, including the establishment of the first architecture school in 1913. The roles of regulatory bodies like the Council of Architecture and Indian Institute of Architects are explained. Common types of architectural practice structures like proprietorship, partnership and private companies are defined. Typical organization structures for architectural offices and methods for setting up and managing finances of an office are also outlined.
This document provides an overview of an upcoming webinar on decoding the Unified Development Control and Promotion Regulations (UDCPR). It includes an index of chapters that will be covered, with the name of the presenter for each chapter. The chapters include administration, development permission processes, land use classification, general land development requirements, building requirements, parking requirements, and special provisions. Definitions that will be important for understanding the content are also provided. The webinar aims to explain the provisions and requirements of the new UDCPR.
The document provides information about the Energy Research Institute (TERI) in Bangalore, India. It discusses the location, climate, introduction, orientation, and various passive design strategies used in the building. The building is oriented along an east-west axis with the northern side open to take advantage of glare-free light. Passive strategies include a double cavity wall on the south side for insulation, an atrium space with skylights to bring in natural light, and an earth air tunnel system for passive cooling and heating. The design aims to minimize energy usage through various architectural and passive design elements that respond to the local climate and environment.
Pentathlon Sports Center | Architecture Design standardsYasmine Bannoura
Modern Pentathlon center + Residential Building
Contents:
1. INTRODUCTION
2. COVERED HALL
POOL BUILDINGS
FENCING SPORT
SHOOTING RANGES
3. OUTDOOR SPORTS
EQUESTRIAN
SPRINT “RUNNING”
JAVELIN THROW
ARCHERY
4. PHYSICAL THERAPY ZONE
5. RESIDENTIAL ZONE & SERVICES
6. PLANNING STANDARDS
FOR SPORTS BUILDINGS
A Report on Urban Redevelopment which covers Introduction, Indicators of Redevelopment(Construction, Rehabilitation & Relocation), Local Study(Bangladesh), International Study of Redevelopment, Preservation aspect, and most important part of Redevelopment i.e. Methodology.
Aerocon Panels | Aerocon Blocks | Aadam EnterprisesUdayaraj K
1. Aerocon panels are prefabricated sandwich panels made of fiber reinforced cement sheets on both sides of a lightweight concrete core, providing a lightweight and durable solution for partitions, mezzanine floors, prefabricated structures, and more.
2. The panels have advantages of being fast to install due to their tongue and groove joint system and factory curing. They are strong, fire resistant, termite resistant, and provide acoustic and thermal insulation.
3. Aerocon panels can reduce construction costs by up to 20% due to their light weight and speed of installation compared to traditional construction. They also provide additional floor area of up to 5% by allowing thinner walls.
If you are looking to buy/sell/rent an apartment in Commonwealth Games Village then call us: 9717288533
Mail: info@guptarealty.in
We have a wide range of inventory in this complex. We have a professional approach towards our services in real estate.
CCTV Building, A Structural Design OverviewPeter Bach
The CCTV building is one of the several big Beijing Olympic projects, which houses the headquarters for the Chinese Central Television Network. Its design shows unique style, but great structural engineering challenges to overcome. The following presentation provides an overview of how these challenges were overcome. (Presented at Monash University, Department of Civil Engineering, August 2008).
This document presents information on green building assessment systems. It discusses the key principles of green building including efficient use of energy, water and resources, and protecting occupant health. It then describes the BREEAM assessment system, the first in the world, and provides examples of buildings that have achieved high BREEAM ratings, like PwC's London office which scored 96.31% and was the first to receive an "outstanding" rating. One Angel Square in Manchester scored 95.16% under BREEAM and featured innovations like a living wall and biodiesel-powered energy system.
PREFABRICATED CONSTRUCTION CASE STUDY: THE HEMISPHEREShivangi Saini
The document summarizes details about The Hemisphere housing project in Greater Noida, India. It describes the project as luxury villas equipped with modern amenities located on a 9-hole golf course. The apartments feature 3 units per floor with golf course views from all units. The structures use a precast construction method with prefabricated wall panels, columns, beams, and staircases that are assembled on site. Connection details are provided for walls, beams, slabs, and columns.
The document discusses the client and architect relationship and the importance of collaboration. It notes that collaboration matters more than just being a nice idea, and asks how collaboration can be achieved between the client and architect. The brief is important, but clients may not know what they need, as illustrated by a Henry Ford quote about developing cars rather than faster horses.
Design of Football Stadium - Design Project for Civil EngineersIndhumathi1134
Project covers the planning and design of Football Stadium, which includes the design of Staircase, Beam & Column manually done using IS:456-2000 & SP-16
This document provides details on the design of a sports complex located in Jamia Nagar, Delhi. It includes plans and sections for the table tennis hall as well as dimensions for other facilities. The complex contains an indoor stadium, two grounds for cricket and football, and three courts. The table tennis hall can accommodate 500 spectators and includes four playing tables, wooden flooring and paneling, and retractable seating along one wall. Dimensions and capacities are provided for the reception area, conference room, locker rooms, and other spaces within the complex.
Bamboo construction, Ferrocement, Wattle & Daub techniqueAzleen Kazi
A presentation on the constrcution techniques by Bamboo construction, Ferrocement, Wattle & Daub techniques, their applications and advantages disadvantages and site images
Class Project for PM class, Scenario Based Presentation. This presentation has some details based on a question. Overall it gives an idea about critical path of a project . I will soon post the question for more clarity . Many thanks for your time.
The document provides instructions for a stadium design project. Students must complete several drawings for their proposed stadium design by May 28th, including a sky view, arena views showing the seating and concourses, and concourse views. They will then present their proposals to be graded on clarity, explanation of their design decisions, and equal group participation. Today's task is for student groups to review their graded proposals, delegate drawing tasks among group members, and submit a paragraph summarizing their plan to complete the project drawings and presentation.
Stadiums That Changed The Game - Structure Development Of Stadiumssoumya2492
Stadiums That Changed The Game. The Presentation shows and describes the structures and construction details of some of the world's most re knowned stadiums ie: Eden Gardens (Kolkata), Lord's, MCG, Bird's Nest, Cape Town Stadium and Maracana Stadium (Brazil).
Stadium Design and Reference Guide with Meru Networks WLANKevin Coppins
Balancing the fan experience with the business of stadium management. Properly designing for device density & diversity, application complexity & criticality as well RF.
How to build a stadium that can tackle the Big GameSkanska USA
MetLife Stadium in New Jersey is one of the most technologically advanced and green stadiums in the world. It has state-of-the-art WiFi, cellular networks, video displays, and a 2,500 speaker sound system. Over $80 million was invested in information technology. The stadium also focuses on sustainability through initiatives like low-flow toilets, synthetic turf, solar power, and encouraging public transportation use to reduce its carbon footprint. It was constructed using innovative building information modeling and prefabricated concrete pieces to finish well ahead of schedule.
The document contains contact information for MSC Consulting Group Ltd. located in Takapuna, Auckland, New Zealand. It lists their address, postal address, phone number, fax number and website address repeatedly.
MA Chidambaram Cricket Stadium by VME Precast VME Group
MA Chidambaram Cricket Stadium by VME Precast. Work comprises through construction of 6000 rm precast gallery steps which is been done at a short duration of 45 days
The document provides an introduction and overview of City Mall36, a shopping mall located in Raipur, Chhattisgarh, India. It discusses the mall's establishment in 2007 and its role in providing Raipur residents access to branded products and a one-stop destination for shopping, entertainment and food. Key factors that define City Mall36's popularity include its variety of branded stores, large food court options, entertainment facilities like a movie theater and gaming zone, and the introduction of many national brands to Raipur for the first time. Demographic data on Raipur's population is also presented to showcase the city's growth and market potential for the mall.
How To Build A World Cup Cricket Stadium With Emotional Intelligencegalbabright
The document summarizes a project to build a cricket stadium in Jamaica using local workers. A management firm provided ongoing support to workers, including an emotional intelligence learning program. This helped the workers improve their self-awareness, relationship skills, and productivity. As a result, they delivered the project ahead of schedule and under budget. The workers' success demonstrated that with the proper tools and support, employees at any level can improve their performance.
Uttar Pradesh has a strong agricultural base and is the largest producer of food grains in India. In 2015-16, the state produced 46,547.9 thousand tonnes of food grains. The key crops produced in the state include wheat, rice, vegetables, fruits, spices, pulses, potatoes and onions. Uttar Pradesh accounted for 18.39% of India's total food grain output in 2015-16. The state also has a large horticulture industry and is the second largest producer of vegetables in India.
2313 – al arabi stadium upgrade-structural presentationShyam Sundar
The document outlines the structural upgrade plans for Al-Arabi Stadium, including enclosing the main football field with an overhanging roof. It discusses performing a feasibility study of the existing stadium and roofing options, with the roof cantilevering out and allowing an unobstructed view. Wind tunnel testing and CFD studies will determine the most suitable roof profile. The schedule and deliverables are presented, along with known issues like connecting the new roof structure to the existing stadium. A case study of University of Phoenix Stadium is also included for its air-conditioned, collapsible central roof design.
This document provides information about Chin Woo Stadium located in Kuala Lumpur, Malaysia. It discusses the history and architecture of the stadium. Some key points:
- Chin Woo Stadium was constructed between 1950-1953 and was the first sports facility in Malaysia to have an Olympic-sized swimming pool.
- The stadium was designed in the Art Deco style by architect Dato' Y.T. Lee. Features include a flat roof, rounded edges, horizontal grooves, and porthole-shaped windows inspired by ships.
- In addition to sports, the stadium was a venue for entertainment and hosted activities like Chinese painting and calligraphy classes to promote Chinese culture.
Huawei presents its smart stadium solution which provides powerful ICT infrastructure to enhance the fan, club, and stadium experience. The solution includes a high-density WiFi network, cloud IP contact center, telepresence, and an eLTE 4G emergency command center. Case studies are presented of Huawei's work providing networking solutions for major sporting events around the world like the World Cup and Olympics which required reliable connectivity and zero interruptions. Huawei is a global company with expertise implementing smart stadium solutions in over 140 countries.
The Beijing National Stadium, also known as the Bird's Nest, is located in Beijing, China. It has three floors and is 226 feet tall. It was designed by Herzog & De Meuron and engineered by Ove Arup & Partners to withstand earthquakes up to magnitude 8. The stadium's steel lattice exterior and separate concrete interior allow the two structures to move independently during seismic activity without damaging the stadium. The Bird's Nest can seat over 91,000 spectators across its eight individual concrete seating sections.
Spanning Space, Horizontal-span Building Structures, Wolfgang SchuellerWolfgang Schueller
The lecture is in support of:
(1) The Design of Building Structures (Vol.1, Vol. 2), rev. ed., PDF eBook by Wolfgang Schueller, 2016.
(2) Building Support Structures, Analysis and Design with SAP2000 Software, 2nd ed., eBook by Wolfgang Schueller. The SAP2000V15 Examples and Problems SDB files are available on the Computers & Structures, Inc. (CSI) website: http://www.csiamerica.com/go/schueller
BIM Show Live 2015. Man City Stadium Construction – from Design to mass Fabrication– Using custom BIM tools to maximise the efficiency of the production of a Stadium Seating Bowl by Populous
The document proposes two building projects for a plot of land in Subang Jaya, Malaysia. The first proposal is for a multipurpose indoor sports centre. It would have two floors with various indoor sports facilities, a café, and amenities. The second proposal is for an indoor recreational centre called "Pandemonium" that would provide entertainment activities. Both proposals aim to benefit the local community by providing recreational opportunities and creating jobs.
This document presents a presentation on master planning. It defines a master plan as a general plan for the future layout of a city showing existing and proposed infrastructure. The objectives of a master plan are to intelligently spend public funds for public welfare, arrange the town pattern to satisfy present needs without compromising the future, and restrict unplanned growth. Developing a master plan is a lengthy process that involves collecting data, drafting a plan, soliciting public comments, revising the plan, and determining the implementation sequence. Execution of the plan is carried out in stages by the local authorities to fit improvements into the overall vision. A well-prepared master plan can ensure the harmonious and proportional development of a town over time.
This document provides a group report for the design of an automated tennis court dragging machine. The machine is intended to replace the manual process of dragging nets across clay tennis courts for maintenance. Key points from the report include:
- The machine is designed to cover a full sized tennis court in 5 minutes to evenly redistribute clay particles across the surface more efficiently than manual dragging.
- It utilizes a court-wide design with wheels, battery power, brushes, and sensors to autonomously navigate and perform its task while avoiding obstacles.
- A commercial strategy is proposed to market the machine as the first of its kind, including an initial discount, demonstration and leasing options, and variable pricing models.
This document proposes developing a double-story sports center on a 3,500 square meter plot of land in Bukit Kinrara, Malaysia. The sports center would include an indoor sports hall, futsal court, skate ramp, coffee shop, exercise studio, gym, and other facilities. It would benefit the local community by providing a place to exercise and socialize. Professionals needed for the project include architects, landscape architects, quantity surveyors, engineers, and contractors to design, plan, and build the sports center.
The document proposes developing a sports hub through a public-private partnership that would regenerate a region and drive economic growth. The sports hub would include an outdoor football stadium seating 25,000, an indoor multi-purpose arena, facilities for tennis, basketball, and other sports, a sports academy, and supporting commercial developments like retail, hotels, and offices. The project would cover 11 acres and leverage private sector financing and expertise to build new facilities in a financially sustainable way while freeing up public resources for other services.
IRJET-Analysis and Design of Indoor Stadium Building using ETABS Proposed at ...IRJET Journal
This document summarizes the analysis and design of a proposed indoor stadium building with 3 floors using ETABS software. The objectives are to ensure safety, strength, stability and economy according to codes like IS 456 and IS 800. The methodology involves planning the building layout in AutoCAD, modeling it in Revit and ETABS, analyzing it for forces like shear and bending moment, and designing the building components like beams, columns, and foundations. Various structural elements are checked for design using ETABS. The indoor stadium will contain facilities for sports like basketball, squash, badminton, swimming, and more.
The document proposes the establishment of an Engineering Wing for the Sports, Tourism, Archaeology, Museums and Youth Affairs Department of Khyber Pakhtunkhwa. It was allocated Rs. 15 million with Rs. 5 million for the current fiscal year and Rs. 10 million for the next fiscal year. The Engineering Wing would enable the department to carry out preparation, execution and monitoring of projects. It would have various staff positions such as engineers, architects, supervisors and support staff. The Wing is intended to help the department carry out its various activities internally in a timely manner by undertaking all related work and formalities.
The document proposes the establishment of an Engineering Wing for the Sports, Tourism, Archaeology, Museums and Youth Affairs Department of Khyber Pakhtunkhwa. It was allocated Rs. 15 million with Rs. 5 million for the current fiscal year and Rs. 10 million for the next fiscal year. The Engineering Wing would enable the department to carry out preparation, execution and monitoring of projects. It would have various staff positions such as engineers, architects, supervisors and support staff. The Wing is intended to help the department carry out its various activities internally in a timely manner by undertaking all related work and formalities.
This document discusses the design, analysis, and fabrication of a prototype highway wind turbine. It begins with an introduction covering global and local utilization of wind energy, including statistics on installed wind power capacity worldwide and wind energy potential in Pakistan. The problem statement outlines challenges facing wind power generation. The document then covers the project objectives, literature review on vertical axis wind turbines and prior related work, and project management aspects such as the timeline and work breakdown structure. Subsequent chapters discuss the engineering design and analysis using SolidWorks and ANSYS, fabrication of the turbine prototype, testing plans, and considerations around safety, maintenance, environment, and economics. The conclusion discusses specifications, recommendations for future work, and lessons learned.
This document provides details about a summer training report completed by Ankit Gautam on an overhead bridge construction project by U.P. State Bridge Corporation Ltd. It includes information about the project location, duration, features of the project such as dimensions and materials used. It also describes the various machines and equipment used in construction including hydraulic cranes, concrete mixers, auto levels, and pre-stressing jacks. Finally, it discusses the key components of the bridge including reinforced earth walls, piers, bearings, and pre-stressing of concrete.
Suman Jyoti
Madan Ashrit Memorial Technical Collage. Gothatar, Kathmandu
The Report Includes:-
Building (Drawing, Theory and Estimation)
Highway ( Detailing, Theory and Calculation)
Sanitary ( ( Detailing, Theory and Calculation)
Irrigation (Theory only)
Town planning is both an art and a science that aims to organize land use and infrastructure in a way that maximizes economy, convenience, and beauty. It involves collecting and analyzing data to arrange components of a town or city, including transportation networks, public buildings, housing, recreation areas, and zoning. Proper town planning is necessary to avoid uneven and chaotic development, congestion, and unhealthy living conditions without adequate amenities. Key principles of town planning include zoning land uses, establishing green belts, providing different housing types, well-placed public buildings, recreation centers, efficient road and transportation systems.
The document describes the design of an indoor stadium using Building Information Modeling (BIM). It discusses planning the stadium in AutoCAD, importing the plans into Revit for 3D modeling of the exterior and interior, and analyzing the structural elements using StaadPro. The objectives are to design the stadium according to building bye-laws and regulations while allowing for a retractable roof. Methodology includes site selection, 2D planning, 3D modeling in Revit, and structural analysis in StaadPro to design the columns, beams, slabs, and other elements of the indoor stadium.
At present scenario, productivity and economics of machining work pieces in large
quantity is greatly affected by use of work holding devices like fixture. To achieve
require accuracy with reduced rework and easy handling, fixtures are provided. This
project is about designing the fixture for pressing bearing inside the crank case. For
this purpose of designing and analysing the modelling software known as solid works is
to be used. The fixture is design mainly to get multiple bearing pressed on crank case
while keeping it stable and to get the accuracy of press within tolerance limit.
The document provides details about the Wankhede Stadium project in Mumbai, including key statistics, photographs, project status, timeline, costs, challenges, innovations, and impacts. The 35,000 sqm stadium was completed in January 2011 at an estimated cost of 250 crores to seat 32,000 people. It faced challenges like tight space and a short timeline but overcame them through innovations like a 25m cantilevered roof and stringent quality control processes. The stadium has added to India's self-reliance in cricket and helped host international tournaments.
Internship front pages (3 files merged)tp jayamohan
This report summarizes the internship of the author at a construction site in South Kalamassery, Ernakulam. The five-day internship involved observing the reinforcement and concreting of the basement slab, and formwork of retaining walls. The project site is a five-story residential and commercial building. On the first day, reinforcement was placed for the basement slab. On the second day, the basement slab was concreted. The last two days focused on the formwork of retaining walls. The report also discusses soil testing, foundation design using a reinforced concrete raft, and concrete mixing and placement.
Growth pattern of towns Natural and Planned,
Types of zoning and importance,
various road networks(Grid iron pattern, shoe string development,
Surveys for data collection, physical survey, social survey, economic survey, civic survey,
Town aesthetics, landscape architecture,
Rehabilitation of slum and urban renewal,
This resume is for Munindra Kumar Chaturvedi, who has over 30 years of experience in both industrial and teaching roles. He received a B.E. in Mechanical Engineering from MNIT Jaipur and is a member of The Institution of Engineers (India). His experience includes roles as Works Manager, Director, Deputy Manager, and more at various industrial organizations. For the past 7.5 years he has worked in teaching roles at G.R.K.I.S.T. Jabalpur and T.I.E.T Jabalpur, teaching subjects like Manufacturing Technology and Production Processes. He has also organized several seminars, competitions, and other events to promote student development.
This document describes an industrial training report submitted for a Bachelor's degree in Civil Engineering. It provides details of a project involving the construction of an elevated road by Jaipur Development Authority in Jaipur, Rajasthan. The project involves constructing pile foundations, piers, and other substructures to support the elevated roadway spanning approximately 2.8 km. Construction materials, equipment, and technical design details are discussed.
Blood finder application project report (1).pdfKamal Acharya
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Accident detection system project report.pdfKamal Acharya
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
Levelised Cost of Hydrogen (LCOH) Calculator ManualMassimo Talia
The aim of this manual is to explain the
methodology behind the Levelized Cost of
Hydrogen (LCOH) calculator. Moreover, this
manual also demonstrates how the calculator
can be used for estimating the expenses associated with hydrogen production in Europe
using low-temperature electrolysis considering different sources of electricity
Digital Twins Computer Networking Paper Presentation.pptxaryanpankaj78
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Impartiality as per ISO /IEC 17025:2017 StandardMuhammadJazib15
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
Open Channel Flow: fluid flow with a free surfaceIndrajeet sahu
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELijaia
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
1. Page | 1
A
Seminar Report
On
“Practical Training”
Taken at
“Construction Of Stadium At S. N. Puram Sector-E Kota”
From
Urban Improvement Trust (UIT), Kota
And
Submitted in the partial fulfillment for award the degree of
Bachelor of Technology
In
Civil Engineering
From
Rajasthan Technical University, Kota
Session 2014-2015
Guided by:- Submitted by:-
Mr. Ankush Jain Lokesh Kumar Meena
Ms. Shivanshi B. Tech. 4th
year (7th
Sem.)
Mr. Avi Maheshwari Roll no.11ERNCE044
Dept. Of Civil Engineering Enroll. no. 11E1RNCEM2XP044
R.M.E.C. Submitted to
Department of Civil Engineering
R.N.MODI ENGINEERING COLLEGE, Kota
3. Urban Improvement Trust , Kota
“ SPORT
SPORT FOR DEVOLOPEMENT & PEACE”
Construction of stadium at S.N. Puram
Executive
Govt. Of Rajasthan
Urban Improvement Trust , Kota
“ SPORT FOR ALL,
SPORT FOR DEVOLOPEMENT & PEACE”
Report on
Construction of stadium at S.N. Puram
Sector –E, Kota
With guidance Of
Executive Engineer of U.I.T Kota
Mr. S.P. Khurana
And
Junior Engineer
Mr. Kamal Meena
Urban Improvement Trust , Kota
SPORT FOR DEVOLOPEMENT & PEACE”
Construction of stadium at S.N. Puram
Engineer of U.I.T Kota
4. Page | 4
ACKNOWLEDGEMENT
I feel immense pleasure in conveying my heartiest thanks and deep sense of
gratitude to Head of the Civil Engineering Department of R.N.Modi Engineering
College, Kota for his efforts and for technical as well as moral support.
Engineers and other technical and non technical staff, for helping in understanding
the various aspects and constructional detail of work and site in Construction
Stadium at S.N.PURAM Sector –E, KOTA.
It may not be possible for me to acknowledge the support of all my friends, but I
am thankful to all my colleagues and other trainees for their valuable ideas and
support during training period.
I am also give thanks to my guidance at the training Site Executive Engineer Mr.
S.P.KHURANA And Junior Engineer Mr. KAMAL MEENA for giving me best
guidance in field of Construction.
Lokesh Kumar Meena
5. Page | 5
PREFACE
A rapid rise in the use of Construction is placing a very heavy responsibility on
build to any site undertaking to maintain their building design in perfect condition,
young engineers is called upon to do design, system planning and construction and
design of site before he had much experience and practice soon may be responsible
for specialize operation in an ever expending industry. Theoretical knowledge
gained in their college courses need to be supplemented with practical know-how
to face this professional challenge, so……..
As a part of our practical training we have to attempt the rule of Rajasthan
Technical University, Kota. I look my practical training at Construction site of
Stadium at S.N.PURAM Sector –E ,Kota.
Since my training centre was of Construction Site of Stadium hence I have
included all updated information, to the extent possible, including general
introduction and brief description of starting Construction of an Stadium in this
study report.
During my 30 Working days practical training, I had undertaken my training at
Construction Site of Stadium at S.N.PURAM ,Kota.
I had taken my first practical training at Construction Site of Stadium at
S.N.PURAM ,Kota. .
The period of training was from 05/06/2013 TO 04/07/2013.
This report dealt with the practical knowledge of general theory and technical
data/detail of equipments, which I have gained during the training period at
Construction Site of Stadium at S.N.PURAM ,Kota.
6. Page | 6
CONTENTS
GENERAL…………………………………………………9-12
1. Introduction
2. Definition
3. History
4. Scope of Paper
SITE SELECTION……………………………………………...…12
FUNCTIONAL ANALYSIS……………………………………...12
FIELD DESIGN……………………..……………………………..14-28
1. Popular Outdoor Game in India And Their field
a. Athletics
b. Cricket
c. Football
d. Hockey
e. Lawn tennis
f. Volley ball
g. Kabbadi/Wrestling/Boxing
2. Orientation(Field)
3. Grading
4. Drainage
7. Page | 7
5. Surfacing
a. Turfing
b. Running Tracks
c. Sand Pits
d. Natural Soils Mixed With Sand & Clay
e. Stabilized Soils
f. Abrasive Materials
g. Bituminous Concrete
h. Cement Concrete Plain or Rain forced
6. Lighting
7. Fencing
8. Multipurpose Field
a. Main Area
b. Athletic Area
c. Velodrome
d. Swimming pool
SEAT DESIGN…………………………………………………..28-42
1. Orientation (SEATS)
2. Distance from Playing Field
3. Clear Vision
4. Tread Width
5. Seats
9. Page | 9
*GENERAL *
1. Introduction
India is one of those fortunate countries. Which have which natural
reserve of scores talents. Since independence, india’s magnificent victories in
various games in international meets have placed her on the sports maps of the
world. Her victories in cricket, abroad and at home, need no mention and the thrill
and packed matches attracted unmanageable crowds. Using the last Olympics,
India displayed and outstanding exhibition in the sport of hockey and impressed
the world with speed and clever position play. Out athletes have been fully
Established in field and track events.
Due to these victories and achievements our Nation has become sports
intoxicated. There is an over whelming demands for further development in the
existing performances. This can only be accomplished by adequate regular
training, tournaments and competitions which are necessary to test talents and to
give poise and confidence. The very atmosphere of a tournaments , tense and
taxing, is apt to bring the best out of a sportsman and it is in competition that a
great sportsman really discovers himself. A good competition acts as a powerful
spur to sport, whips up interest among the people and draws large crowds to the
contest.
Regular tournaments and international meets so necessary for raising the
standard of sport grounds and stadiums are available with in the countries.
Throughout the country, improvised sport grounds and viewing stands are
appearing every year. A international stadium in jaipur has become focal point of
activity and large stadiums are under construction at Kota and all minor city of
Rajasthan.
The planning and design of stadiums is a highly specialized subject with a
limited scope on which practically no standard comprehensive text is available.
The small stadium being developed by the local bodies are the seeds for future
large ones. Their smallness does not excuse planning which ignores efficient and
economical maintenance & operation, wastes space, slights spectators convenience
and enjoyment, defeats maximum participants performance, abuses public relation
and disregards future growth and demands. In one or two case, tragic error have
been committed due to ignorance, false economy or a tendency to imitate . In our
country ,the position of architects is not likely to improve in the near future and as
such the problem remains the complete concern of engineers.
10. Page | 10
2. Definition
The definition of the word of stadium is an evolution from the Greek.
It was originally applied to a measure of distance being equal to about
606ft, and then become transferred to indicate the race. Later the terms
was used to designate the race course on which such a distance was laid
out. The curved embankments around the Greek race courses were
flanked with terraced seats for spectators and the name stadium was
applied to the complete layout in modern usage the stadium is one of the
several word applied to a large construction, covered or uncovered,
which combines space for games and seats for spectators.
3. History
The Greek built one of the first stadium at Olympia for the famous
games of the day. At a later stage the Romans built several types of
structure for similar purpose and the colleseum is very popular. The
ravages of time and disuse have largely destroyed it but its elliptical
shape, parabolic rise of successive tiers for sights clearance , exit and
entrance system, and other principals design and architectural treatment
have been adopted in present practice. In general outlin , it still remains
one of the most Magnificient stadium ruins in the world.
After the fall of roman empire sport played a minor role in mens
lives and for nearly twenty centuries the stadium building was a lost art.
During 19th
century physical exercise were revived and due to the
efforts of a Frenchman organized athletics became a regular
international feature Reconstruction of stadium in Athens in 1896
revived the Building of a large permanent stadiums.
11. Page | 11
Great Era of modern stadium construction started early in 20th
century.
Since then stadia of various shapes and seating capacities have been constructed
practically in every country. America and U.S.S.R. have throbbing net works of
them. Some are designed for one sport only while others, along with some games,
embrace field and track event. It could be safely said that the number of stadia in
any country is an index to the physical and mental development of its people and
the economic condition of the country as a whole.
4. Scope of Paper
Effective planning and design utilized fully the possibilities afforded by the
site for the attainment of the purpose desired. The creation of an effective and
attractive plan of a stadium confronts the designer with several major problems,
12. Page | 12
namely, accessibility, integration and effective use of the proposed development,
convenience and safely of public and participants, economy in construction and
maintenance, ease of administration, supervision and operation, and conformity to
the principals of good architecture etc. No standard design or pattern can be
applied for each project calls for resourcefulness, skill and understanding on the
part of the designer. However, intimate knowledge of sports needs and interests,
availability of data about playing field, their measurement, orientation and
specification etc. are very essential. Then the solution lies on the ability of the
designer to arrange these factors in most appropriate and economical way. This
paper describes some of most important basic factors.
All the suggested principal of design and functional planning apply
to large as well as small stadiums.
*SITE SELECTION*
The location of the stadium must be convenient and readily
accessible from the startagic points and transport stations of the city.Comparatively
level and well drained areas free from strong wind currents and with adequate
water supply are most suited and available at cheaper rates, can be economically
developed to create aesthetic value and sports assests with some disadvantages in
the stagnation of air which retards drying of fields and occasionally works a
hardship on the players. Attractive surrounding have much greater influence and
appeal. Ugly and drab environment must be avoided. The site should also be away
from air fields, fire station, hospital, factories, rail road or other building and
disturbing factors of odour, noise, dust and smoke which might handicap the
stadium programmes. Location in the heart of a residential area should also be
avoided, if possible, because the noise and congestion resulting from the large
crowds attracted to the stadium are likely to be objectionable to the people of
neighborhood.
*FUNCTIONAL ANALYSIS*
The exterior appearance of a building is very important but
it is second in importance to its functional design. Functionally, the stadium is an
13. Page | 13
athletic field surrounded by seats. Area is the central feature of design. Its
relationship with the requirements and facilities of spectators, participants and
administration is very important. Each element in the set up has a specific func-
tion to perform and efficiency and economy depend upon its size, form and
arrangement in the integrated whole.
Diagrammatic analysis of fundamental requirement
their inter relationship and circulation aspects for spectator as well as participants
are given fig. number 2. These general relationships almost hold good for all types
of stadium but peculiarities of the selected site, the number of spectators to be
accommodated and anticipated expansions etc. are very significant factors for
effective of any particular problem.
14. Page | 14
*FIELD DESIGN*
1. Popular outdoor games In India and their field:-
The field of sport and games is very vast and only popular out-
door sports and games played in India have been included in this paper
which does not cover cycle racing and horse racing.
(a) Athletics:-
The sports of athletics which comprises competitions in walking,
running, jumping and throwing is really the most natural of all sports. Its
history goes back to prehistory period and we have details of Olympic
games during Greek and Roman periods. The first modern Olympics took
place at Athens in 1806 and women events were included in 1928.
Athletics events have now become standardized. Races are a series of
recognised distances and throwing and jumping are held in accordance
with internationally agreed upon roles. Standard layout and construction
details for track and field event are given in fig.
(b) Cricket:-
Cricket can claim a longer history than any other game. Historians
have attempted to trace its origin in various games played in India before
the advent of English period, but it is certain that this game in its present
form was introduced by the English in this subcontinent. Cricket is not
taken with much enthusiasm except in England, Australia, South Africa,
West Indies and India. Within a few years of independence, India has
established itself in the cricket world and, due to outstanding inter-
national victories, the cricket has acquired the role of a national game in
our country.
The games does not offer the speed loving era a great deal of action.
It is entirely dependent on fine weather and many games have to be left
15. Page | 15
inconclusively drawn. No specific dimensions have been laid down for s
cricket field but the game requires, for safety a field approximately 400ft.
in dia. And clear of obstructions. The pitch proper should be a perfectly
level area extending about 100ft in width so that the wickets can be
moved from side to side thus enabling the grass to recover from hard use
to which it is subjected. The details of cricket field and pitch are given fig.
16. Page | 16
(c) Foot Ball:-
It is impossible to say that just who first thought of foot ball.
Attempts have been made to trace the game back to Romans but it is
certain that the game made its appearance in this sub continent due to the
English. The growth and popularity of foot ball during this century has
been remarkable and at present the game is played in various styles in
different parts of the world. Association foot ball is usually played in India
and its field in fig.
17. Page | 17
(d) Hockey:-
Hockey originated In Persia and is supposed to be the oldest
stick and ball game in the world. It was organised in England about a
century ago and since has spread to many countries. It has been played in
Olympics since 1908 and India has dominated practically every
competition. The details of field are given below.
(e) Lawn Tennis:-
Tennis “the game of king” is extremely popular in almost. Every
country in the world. As its name implies it was originally intended to be
played on grass but through the name “Lawn Tennis” has been retained,
18. Page | 18
it is now played on variety of surfaces, turf, clay, dirt, water bound
macadam, concrete and bituminous surface as well as indoors on woods.
(f) Volley Ball:-
Volley ball is a game of middle classes and can be played on any
level surface large enough for a court the official dimensions of which are
given in drawing. Generally the game is not likely to attract large crowds at
any important meet can be easily organised in athletics or cricket stadium.
(g) Kabbadi, Wresting and Boxing:-
Kabbadi is an indigenous game and can be played on turf or
Loosened soil. Its inclusion in tournaments is more of a courtesy and
possibility of its large scale development seems remote. Wresting is an
19. Page | 19
Individual combat and Gama’s conquests created international blaze of
glory. Loosened soil is the most economical and popular surface.
Spectators prefer closer view and arena could be suitably provided in
any stadium.
2. Orientation (Field):-
The perfect orientation for all playing areas under all conditions is an
ideal which Is difficult to attain. Topography, shape of area, time of day the
ground is to be used, geography and other conditions enter into the problem of
orientation. Keeping these variables in mind one should orient courts and fields in
such a manner that maximum protection is given to the players who need it the
most.
20. Page | 20
Field and courts should be orientated so that the late afternoon or
early morning sunrays intersect the general path of the ball flight at an angle of
approximately 90˚. In rectangular fields and courts, the general pattern of the
balls flight is parallel to the long axis. Therefore the long axis should be generally
at right angles to the late afternoon sun rays. The sun set position for the mid
season of the late sports involved should be located and the field or court
orientated accordingly. Orientation depends upon latitude and hour of play which
within reasonable limits be adjusted to finish the game before dusk.
Geographically of India is situated between 20˚ to 77˚ latitude and for
the purpose of orientation , average latitude of 30˚ is taken. Playing season is
assumed to extend from 15th
September to 30th
April time of play as 3 hours to
half an hour before sun set. When the stadium is design to provide facilities for
several sports extending over major part of the year the problem of orientation
becomes more difficult and a compromise in orientation must be adopted. The
sport which predominates and for which the sun has the most harmful effect is
given the chief consideration.
3. Grading:-
Grading is the process of changing the existing levels of the area most
lands are rough and require gradation which facilitates the removal of surface
21. Page | 21
water and gives even surface for playing. In accordance with the fundamental of
earth work, the amount of “cut” should if possible balance the amount of “fill” in
order to avoid the necessity of hauling away the excess earth or hauling in the
needed material. The slope of the top should be gradual so that it will not be
washed away during or after a heavy rain. A grade of 1 in 100 is usually satisfa-
ctory on turf and should not extend more than 200 to 300ft otherwise ruts will be
formed by the water running off after a heavy rain fall. This can be done by
providing suitable net work of catchment drains.
4. Drainage:-
Treatment of the playground varies with the type of surface and the
climatic condition. Water allowed to collect and stand on the ground interferes
with play and actually makes the area unfit for use. For rain water, a good general
rule is to limit the slope 1% to 3%. Any slope less than 1% is too flat and grade in
excess of 3% tends to cause erosion. During dry season may be required to keep
the turf in a springy condition.
Water logging and ground water lying near the surface of ground tend
to create soggy and uneven surface which does not permit satisfactory play.
Specific play area must be relatively level with a gradual slope, which may be from
end to end, side to side, from one corner to the diagonal corner on the opposite
end.
Drainage of the track is exceedingly important because its moisture
content is very vital. Drains to take care of surface water from ground boarding
the track should be provided as needed along the inner and outer edge of the
track to prevent water from flooding it.
5. Surfacing:-
The following surface treatment are generally given and specific treatment
of any field depend upon the type of activity for which it is planned.
(a) Turfing:-
There is a general agreement that grasses are the best cover for most field
game. Further the turf contributes to the psychological and aesthetic values of
the field. It is not suitable for plays soon after a rain because it is slippery and
moisture effects player clothing and equipment. Important considerations in
22. Page | 22
securing a good turf surface are grading, silting, manuring, preparation of bed and
seeding or sodding such strains.
which thrive in the locality and are resistant to intensive use. The grass is a crop
and cannot be expected to give a good yield if it receives nothing in return and
23. Page | 23
care must be taken in mowing, rolling, feeding and watering the turf. If sufficient
care is not taken the grass will rapidly weaken and die off and die and football,
hockey, cricket fields are subject to severe use and constant rolling leads to
“capped” surface preventing the free circulation of air and moisture, killing the
soil becteria, diminishing the root action and resulting in weeds and patchy
surface. Turf is ruined if used in early spring.
(b)Running Track:-
The running track is a feature of practically every athletic field. Important
considerations in track construction include temperature, rainfall and soil
conditions, which vary in different parts of the country. A well constructed
running track should be put down in three layers.
(1) A soling layer, varying from 3” to 10” depending upon local conditions,
consisting of coarse rubble, stone brick or brick ballest, levelled and
thoroughly rolled.
(2) A middle layer of 5” to 10” cinders of rather coarse grade but without
heavy clinkers and well rolled.
(3) The top dressing 3” to 4” of finely screened cinder 1/4” to 3/8” mesh
with a binder usually of clay, loam or ashes, depending upon local
weather condition and availability of material.
(c) Sand Pits:-
Sand pits are used for jumping events and consist of soft sand or soft
sand mixed with wood shavings and require occasional disinfecting.
(d)Natural Soils Mixed with Sand and Clay:-
In some places local soil mixed with sand and clay and rolled gives low
cost surfacing.
24. Page | 24
(e) Stabilized Soils:-
When turf cannot be grown due to local conditions or when
specialized uses make turf impracticable existing loose soils should be stabilized.
The stabilizing agents more generally used are (a) Rosin (b) Cement (c) Bitumen.
Mix will vary according to the type of soil and moisture contents etc.
(f) Abrasive Materials:-
Crushed stone or bajree, bricks ballest, gravel and graded cinders
mixed with sand clay and adequately rolled give playable surfaces.
(g) Bituminous Concrete:-
The characteristics of bituminous concrete are such that by changes in
aggregates or methods of construction it can provide a reasonably resilient or an
extremely hard surface. Finish or jute, cork, wood pulp, asbestos, bound with
bitumen give resilient surface. Bajree and crushed stone mixed with heavy bodied
high point bitumen give a hard non resilient surface.
(h)Cement Concrete Plain or Renforced:-
Cement concrete is desirable when permanent, durable, and extremely
hard surface is required and the usual mix is 1:2:4.
6. Lighting:-
The growing interest in sports and other multi uses of stadium such
as police tattoos, open air plays etc. Are certain to result in a demand for
the lighting for evening use. Occupation or unfavourable heat during the
day creates desire to participate. Lighting should provide ample visibility
for both player and spectators without objectionable glare. It presents a
25. Page | 25
different problem because there are no walls and ceilings to reflect light
into a central area and lighting intensity which varies from 15-25 candle
powers depends on the size of the field and the type of contest.
(a) Direct light rays should not strike the eyes of player or spectators,
player being given preference.
(b) Glare should be avoided.
(c) All shadows and spottiness should be eliminated.
(d) No obstruction should interfere with the lines of vision.
7. Fencing:-
When the seating structure partially encircles the ground some
sort of purdah is necessary as a barrier to persons who have not gained
admission to the performance. Improvised purdahs of hessian or
shahmianas have the lightness, ease and flexibility of construction to suit
the demands of temporary seats. Permanent purdah walls have greater
initial cost but durability and economy in maintenance and can be
designed to match with the exterior of the stadium. When there is a
passage in front of seats it is desirable to separate the grounds by sinking
the passage by providing mote or some sport of women wire fence in
order to eliminate tress passing, vandalism, interference in game and to
protect the players.
8. Multipurpose Field:-
In our country cricket has acquired popularity and during
international tests it is likely to attract upward of 30,000 fans. Gathering
for important athletics, football or hockey meets are not so spectacular. In
any city cricket test or other important competitive events are held once
26. Page | 26
or twice a year and as such the stadium is not likely to be used for more
than a week or so in any year. The construction cost of about 30,000 seats
will be over Rs. 20 lacs with annual maintenance and depreciation of about
Rs. 60,000/_. The development of separate seating arrangements for
various activities will be very expensive to build and maintain in relation to
volume of its use.
In view of our sports requirements it is desirable to develope
multipurpose field with same seating facilities to serve spectators, equally
well, for practically all the events. The inclusion of field events, foot ball
and hockey inside the cinder track has proved very satisfactory and is
accepted internationally. The laying of cricket field along the side of the
The athletic area will create problems of seating. Overlapping of both fields
is only feasible if some acceptable solution of surface treatments is found.
27. Page | 27
The cricket requires good turf for pitch and sand pits. The over lapping
portions of cricket field and athletics will result in the clash of surface
treatments though the overlapping portions of track are not likely to
receive intensive uses during cricket matches as show in fig.
In order to overcome this difficulty it is suggested that the cinder
track and its curbs be laid about 3” below the rest of the field and during
cricket matches. During matches the turf be cut into sods say 1’×3’and laid
to cover the track and sand pits. Interest on capital investment, maintenan-
ce and depreciation of seating structure with 30,000 seats will amount to
about Rs. 2,00,000/- per year.
In the Nagpur stadium which is being built on the Hyderabad National
Highway, it is proposed to develop 4 arenas and the construction work will
be split up in several phases.
(i) Main Arena:-
A 15’ wide passage will run all around the main arena which will
be 610’ dia. and enclosed by a high fence of welded steel fabric. It will be
adequate to embrace the following events:-
(a) Cricket field with adequate arrangement for alternative cricket pitches.
(b) Two hockey grounds.
(c) Two foot ball grounds.
(d) One hockey and one football ground.
(e) Field and track events with one football or hockey ground.
(f) Velodrome and one football or hockey ground.
(g) Various combinations of the above.
28. Page | 28
(ii) Athletic Arena:-
The arena will be of international specification with eight
running cinder tracks and adequate provision for other athletic events such
as javelin, long jump, discuss, hammer, pole vault, water jump and hop stop
and jump etc. Sand pits where necessary will be provided and the arena will
enclose kabbadi, wrestling and boxing arenas.
(iii) Velodrome:-
The velodrome will be 333.3 meter internal perimeter with
size, super elevation and other specification as per international standards
and will enclose kabbadi, wrestling and boxing arenas.
(iv) Swimming:-
Space is being reserved for future development of a modern
swimming pool.
*SEAT DESIGN*
1. Orientation (seats):-
The player and not the players create a demand for
stadium and it is most desirable to protect them from the glare of sun during the
normal hours of play. In a true stadium, the playing field is entirely surrounded by
the spectators and it is impossible to get all the seats free of sun. It is desirable to
protect the spectators backs towards the sun give may move through a large
angle. Spectators backs towards the sun give best orientation and this is possible
by building on the west and South sides of the ground. For accurate orientation
careful plotting of the suns altitudes and azimuths during the normal season and
playing hours at the particular latitude are involved. Average latitude of India is
30˚N .
29. Page | 29
During winter certain amount of sun is welcomed but the
seats could have sun shades. Careful plotting of the altitude of the sun will give
position for cut back roof which has the advantage of economy, easy cantilevering
and freeing the large area from column a obstruction as shown in fig.
2. Distance from playing field:-
An ideal seat would be one opposite to centre of action
as close to the play as possible and elevated so that the details of the game could
be clearly seen.
30. Page | 30
Placing the first row of seats close to the ground line will necessitate
higher risers in the successive rows to maintain satisfactory sight lines over the
heads of those in front. Therefore the first row of the seats should be placed away
from ground edge as far as possible subject to clear and comfortable vision so
that the sight clearance can be maintained without making the stadium too sleep
for convenience and economy.
3. Clear vision:-
The problem of good view from stadium seats depends on distance,
angle of view and freedom from obstructions.
During normal day light, foot ball game can be conveniently
31. Page | 31
followed from a distance of about 600 to 700 feet. Movements of cricket and
hockey balls are visible from 500 to 600 feet without field glasses. The
visibility of an object depends upon the horizontal and vertical angles
subtended by the rays of light emanating from the object and received by
the spectators eyes. The elevation of an observer above the object to be
viewed has an important effect on the angle subtended when the object has
an appreciable dimension parallel to the line of sight. In race track, foot ball
and hockey, the centre of action involves more than one person and can
best be seen from elevated seats at ground level have poor view of
individual players. Normally the stadium seats are not far enough above the
field to appreciably foreshorten the vertical dimensions of the players. For
spectators in the side stands, the angle subtended by the immediate field of
play along its longitudinal axis, will vary with the nearness of the eye while
the angle subtended along the transverse axis will vary with the vertical
distance above the heads of the players as well as with the horizontal
distance.
32. Page | 32
Obstructions are of several types i.e. inconveniently located railings and
pillars, boxes and covered seats situated in the lower rows, persons walking
along horizontal passages, head of people sitting in front etc. best view is
obtained when the sight lines to any part of the field of action clear the
heads of the spectators in front and the adequacy of clearance is the
important factor in stadium design. Sight lines normal to seats are ordinarily
considered and oblique lines to different parts of the stadium are neglected.
Oblique sight lines tend to restrict the clear view only when the degree of
deflection becomes appreciably large.
33. Page | 33
For a well laid out and properly proportioned stadium the oblique sight
lines will not present any problem. The focal point is the inter section of
sight lines with playing field and its establishment is the first step in plotting
the sight lines. For foot ball, hockey, tennis and kabbadi this should be taken
as the near side of the playing field. For running track a chest height view of
the runner in the nearest lane, is satisfactory. In cricket there is little activity
in the outfield near the boundary line and waist height view of the
occasional runner will be acceptable. From these starting points the
successive rows of seats are located so as to give constant eye clearance.
This clearance is defined as the distance that the line of sight to the focal
point passes above the spectators in the row immediately in front. If the
riser height remains constant the clearance progressively becomes less and
less towards the rear of the stand. To maintain constant clearance for sight
34. Page | 34
lines converging from single focal point, the risers are varied in height increasing
towards the rear of the stand.
Authorities have different as to the correct amount of the eye clearance.
A seated structure is designed for persons of average size and no normal clearan-
ce can prevent the unfortunate case of a small person being seated directly
behind large people. In cinemas and theaters the center of action is reasonably
stationery and fairly raised above the front rows. In sports events the focal point
of action is rapidly shifting resulting in rapid change in the direction of view. This
requires generous provision for sight clearance in comparison to stage or screen
performance. Some designers have recommended sight clearance of 6 inches
while other have adopted 4 to 4⅟2 inches.
It has been assumed by many that the site line can pass to one side of the
35. head of the person immediately in front but should pass over the heads of those
in the second raw. Such assumption produces stand having less rise with average
head of the person immediately in front but should pass over the heads of those
in the second raw. Such assumption produces stand having less rise with average
Page | 35
head of the person immediately in front but should pass over the heads of those
in the second raw. Such assumption produces stand having less rise with average
36. Page | 36
clearance of about 3 inches. The greater the eyes clearance the higher the
stadium and longer the climb to seats. A balance between convenience of sight
lines and convenience of reaching the seats produces the stadium most
satisfactory to the greatest number. The additional cost due to greater height is
also a factor. The height of all risers must be increased to maintain the eye
clearance. Normally the eye in the front row should not be lower than the heads
of persons who might be standing on the ground immediately in front. In the fig.
this places the first eye at an elevation of about 6ft which in turn places the first
foot rest two feet above the playing field. Many stadium have first row seats
placed at a higher level, to provide a more definite barrier separating the field
from the stadium.
Some complicated and labourious formulae have been developed to
express the tread height above datum. Large number of variables are involved in
determining the tread height and it is best to work out from 1st
principle by simple
geometrical relationship or graphical plotting.
It is possible to simplify the sight line calculations if all horizontal
distances are expressed in tread width rather than in feet and modification
of formulae and tables by A.B. Randal and E.S. Cross by are given below and
graphs vide sight line curves for constant sight clearance from focal point
with various combination of variables. The graphs are true sight line curves
for tread width of 30 inches and only slightly out of scale for other tread
widths. The charts cannot be read as closely as may be required for
determination of individual riser heights but will be found useful in approxi-
mating the height of a proposed stadium under various conditions.
39. Page | 39
Theoretical seating curves require each riser to be slightly higher than
the proceeding one and these complicate construction. Adoption of a series of
straight sections approximating to the theoretical curve simplifies the
construction and is economical. In the accordance with the structural gird system
or other consideration the riser heights may be varied for succeeding groups of 5
to 10 rows rather than for each row. This close approximation has proved entirely
satisfactory.
40. Page | 40
4. Tread Width:-
The distance between rows commonly called the tread width is a
controlling factor for the structure as it affects the convenience, comfort, safety
and cost. Determination of tread width depends on.
a. Use of stadium.
b. Type of seats.
c. Seasons of use and climate.
It is expected that the crowds will be seated when the game
starts. The spectators will remain in their seats during the actual play and
movement will occur at intervals. In cricket it is likely, that there will be more
movement in an out of seats during the progress of performance. However in all
the games, some movements in and out of seats during actual play are inevitable
and sufficient distance between spectators and seats should be allowed for such
passage but too ample space will defeat its own purpose by encouraging too
frequent passage of vendors and other along the rows to the annoyance of the
spectators.
Warm weather required more air space. Colder climate makes
close contacts less objectionable. Spacing of rows should be as small as possible
for economy but sufficient for comfort and good view. The use of stand, type of
seat, weather and economic considerations influence the spacing of rows and
varies from 22 inches to 30 inches for seats without backs and 28 inches to 36
inches for seats with backs.
5. Seats:-
In the design of seating several general considerations are important, the
kind of contest or exhibition, comfort, convenience and probable behavior of
spectators. The proper balancing of cost against the comfort and convenience of
spectators are often rated as even more important than the interest of the
players. With a seat for every one and every one in the seat the likelihood of
crowds becoming unmanageable in any period of excitement is reduced to
minimum. The space allowed for each seat lengthwise in a row is generally
between 11 to 18⅟2 inches. Height of seats from floor should be approximately 14
41. Page | 41
to 18 inches. The permanent seats are generally constructed of concrete and can
be covered with durries or coir mattings . Wood tops with or with outs backs are
also used. In the diagrams Wood with good resistence to deterioration should be
used and preservatives if used should not stain spectators clothing. Seats should
be generally numbered and ordinarily should not be carried over expansion joints.
The average seats taken about 3.1 sq ft of floor space. The efficiency
of seating arrangement can be gauged as under.
Where G.A. is gross area per seat i.e. the total plinth area including seats,
passages etc. divided by the planned capacity of the number of the spectators.
42. Page | 42
6. Shape:-
The shape of the stadium depends on the following points.
(a) The sports and the range of the playing field.
(b) Topography and orientation of the playing field.
(c) The desire and practicability of providing the best
accommodation at locations of greatest spectators
interest.
For tennis and volley ball the seats opposite the net are close to the play
but least desirable.
43. Page | 43
CONCLUSION
A technician needs to have not just theoretical but practical as well and so
every student is supposed to undergo practical training session after 2nd
year where
I have imbibed the knowledge about construction, foundation and design with
economical issues related to it.
During our 30 days training session we were acquainted with the construction
of stadium and also the foundation & design of the stadium.
At last I would like to say that practical training taken at stadium of S. N. Puram
Sector–E, Kota has broadened my knowledge and widened my thinking as a
professional.
44. Page | 44
REFERENCE:-
Soil Mechanics and Foundation Engineering-by K. R. ARORA
Principal of Foundation Engineering – B. M. DAS