The document discusses the key characteristics and behaviors of gases. It introduces several gas laws including Boyle's law relating pressure and volume, Charles's law relating temperature and volume, Avogadro's law relating amount and volume, and Dalton's law of partial pressures. It derives the ideal gas equation and shows how it can be used to calculate gas properties like density from variables like molar mass, pressure, temperature.
Dalton's law of partial pressure states that total pressure of the mixture of inert gases is equal to the sum of partial pressures of each gas present in the mixture.
Kinetic Gas Theory including Ideal Gas Equation. Temperature, Volume, Applications
Boyle's Law, Charles' Law and Avogadro's Law. Ideal Gas Theory, Dalton's Partial Pressure
Dalton's law of partial pressure states that total pressure of the mixture of inert gases is equal to the sum of partial pressures of each gas present in the mixture.
Kinetic Gas Theory including Ideal Gas Equation. Temperature, Volume, Applications
Boyle's Law, Charles' Law and Avogadro's Law. Ideal Gas Theory, Dalton's Partial Pressure
Pressure, temperature and ‘rms’ related to kinetic modelMichael Marty
The macroscopic properties of a gas, pressure and temperature, are explained in terms of molecule movement of the Kinetic Theory. The derivation of formulas are shown in logical steps for pressure, temperature and KE.
The kinetic theory of gases describes a gas as a large number of small particles (atoms or molecules), all of which are in constant, random motion. The rapidly moving particles constantly collide with each other and with the walls of the container. Kinetic theory explains macroscopic properties of gases, such as pressure, temperature, and volume, by considering their molecular composition
This presentation talks about the overview of the equations of state as part of behavior of gases chapter. It has equations about the gas laws and combined gas law. Also includes the ideal gas equations and some practice exercises.
Properties of gases: gas laws, ideal gas equation, dalton’s law of partial pressure, diffusion of gases, kinetic theory of gases, mean free path, deviation from ideal gas behavior, vander wails equation, critical constants, liquefaction of gases, determination of molecular weights, law of corresponding states and heat capacity
Gas is one of the three forms of matter. Every known substance is either a solid, liquid or a gas. These forms differ in the way they fill space and change shape. A gas, such as air has neither a fixed shape nor a fixed volume and has weight.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
2. CHARACTERISTICS OF GASES
The Distinction of Gases from Liquids and Solids
• Expand to fill their containers
• Are highly compressible
• Have relatively low densities under normal condition- (g/L) :
When a gas is cooled, its density increases because its volume is decreases.
• Gas volume changes greatly with pressure
• Gas volume changes greatly with temperature
• Gases have relatively low viscosity– flow much more freely
• Gases are miscible – Form homogenous mixtures with each other
regardless of the identities or relative proportions of the component
gases.
3. CHARACTERISTICS OF GASES
The Distinction of Gases from Liquids and Solids
The chemical behavior of a gas depends on its
composition, while all gases have very similar physical
behavior. This is because the individual molecules are
relatively far apart. Thus, each molecule behaves largely as
though the others were not present.
For instance, although the particular gases differ, the same
physical behaviors are at work in the operation of a car
and in the baking of bread.
4. PRESSURE
• Pressure conveys the idea of a force, a push that tends to
move something in a given direction. Pressure (P) is in fact, the
force (F) that acts on a given area (A).
F
P=
A
• Atmospheric pressure is the weight of air per unit of area
• The pressure on the outside of the body is equalized by the
pressure on the inside.
5. PRESSURE
Effect of atmospheric pressure on object at Earth surface
• The pressure on the outside of the body is equalized by the
pressure on the inside.
6. PRESSURE
• Standard atmospheric pressure which correspond to the
typical pressure at sea level, is the pressure sufficient to support
a column of mercury 760mm high.
1 atm = 760 mm Hg = 760 torr = 1.01325 x 105 Pa = 101.325 kPa
• Must able to convert between one and another
• Manometer: Devices used to measure the pressure of a gas in
experiment.
7. PRESSURE
closed-end
• A) equal pressure
• B) Insert gas, it pushes the
mercury , so the mercury
level rises.
• The different in height =
the gas pressure
open-end
8. PRESSURE
Converting Units
EXAMPLE:
A geochemist heats a limestone (CaCO3) sample and collects
the CO2 released in an evacuated flask attached to a closed-
end manometer. After the system comes to room
temperature, Dh = 291.4 mm Hg. Calculate the CO2 pressure
in torrs, atmospheres, and kilopascals.
9. THE GAS LAW
The Pressure-Volume Relationship: Boyle’s Law
• Boyle’s law: The volume of a fixed quantity of gas maintained
at constant temperature is inversely proportional to the pressure.
• The total pressure applied to
the trapped air was the pressure
of the atmosphere (measured by
barometer) plus that of height
mercury column.
• By adding mercury, the air
volume decreased (T and amount of
air is constant)
10. THE GAS LAW
• The result as shown in the graph.
• When the pressure gets larger, the
volume of the gas become lower.
• So, it is inversely proportional.
1
• V P
α
• This relationship also, can be
expressed as
PV = constant (k) or
V = k (1/P)
• This means a plot of V versus 1/P
will be a straight line.
11. THE GAS LAW
The Temperature-Volume
Relationship: Charles’s Law
• Charles found that the volume of a
fixed quantity of gas at constant
pressure increases linearly with
temperature.
• V α T
So, V = constant(k) x T
or
V
T =k
12. THE GAS LAW
• Extrapolated of the graph: passes though – 273 °C (0 K).
• Gas predicted to have 0 volume at this temperature.
• However, absolute zero never reached because no matter can
have zero volume.
• Gas will liquefy before reached this temperature.
• Charles Law: The volume of a fixed amount of gas maintained at
constant pressure is directly proportional to its absolute (Kelvin)
temperature.
13. THE GAS LAW
Other Relationship Based on Boyle’s and Charles
Law
Amontons’s V and n are fixed
P α T
Law
P
= constant P = constant x T
T
Combined gas T
law V V = constant x T/P
P
α
PV = constant
T
14. THE GAS LAW
The Quantity – Volume Relationship: Avogadro’s Law
• Different mol of gas will occupy different volume.
• Double up the quantity (mol) of gas will double up the volume
occupied by the particular gas. (refer B)
17. THE IDEAL-GAS EQUATION
PV = nRT or V = nRT
P
fixed n and T fixed n and P fixed P and T
Boyle’s Law Charles’s Law Avogadro’s Law
V = constant V = constant X T V = constant X n
P
Temperature: Absolute Temperature (K)
Quantity of Gas: moles
Pressure: atm
Volume: Liters
18. THE IDEAL-GAS EQUATION
• The value and unit for R are depend on the units of P,V,n and T.
• In working problems with the ideal-gas equation, the units of
P,V,n & T must agree with the units in gas constant.
• We often use: R = 0.08206 L-atm/mol-K or 0.0821 L-atm/mol-K
• Use the value R = 8.314 J/mol-K consistent with the unit Pa for
pressure is also very common.
19. THE IDEAL-GAS EQUATION
Applying the Volume-Pressure Relationship
EXAMPLE
Boyle’s apprentice finds that the air trapped in a J tube
occupies 24.8 cm3 at 1.12 atm. By adding mercury to the
tube, he increases the pressure on the trapped air to
2.64 atm. Assuming constant temperature, what is the
new volume of air (in L)?
20. THE IDEAL-GAS EQUATION
Applying the Pressure-Temperature Relationship
EXAMPLE
A steel tank used for fuel delivery is fitted with a safety valve
that opens when the internal pressure exceeds 1.00x103 torr.
It is filled with methane at 230C and 0.991 atm and placed in
boiling water at exactly 1000C. Will the safety valve open?
21. THE IDEAL-GAS EQUATION
Solving for an Unknown Gas Variable at Fixed
Conditions
EXAMPLE
A steel tank has a volume of 438 L and is filled with 0.885 kg of
O2. Calculate the pressure of O2 at 21oC.
22. FURTHER APPLICATION OF THE IDEAL-GAS
EQUATION
Gas Densities and Molar Mass
• The ideal-gas equation allows us to calculate gas density
from molar mass, pressure and temperature of the gas.
• Density = mass/volume (m/V)
• Rearrange the gas equation to obtain similar units: moles per
unit volume, (n/V): n P
= RT n P x M( molar
V V = RT mass)
Mn MP mass MP
V = RT V = RT Density = MP
(d) RT
23. FURTHER APPLICATION OF THE IDEAL-GAS
EQUATION
Density (d) = MP
RT
• The density of the gas depends on its pressure, molar mass and
temperature.
• The higher the molar mass and pressure the more dense the
gas.
• The higher the temperature, the less dense the gas.
• The above equation can be rearrange :
dRT
Μ= P
• Thus, we can use the experimentally measured density of a gas
to determine the molar mass of the gas molecules.
24. FURTHER APPLICATION OF THE IDEAL-GAS
EQUATION
Finding Density
EXAMPLE
Find the density (in g/L) of CO2 and the number of molecules
(a) at STP (0oC and 1 atm) and (b) at room conditions (20.0 °C
and 1.00 atm).
25. FURTHER APPLICATION OF THE IDEAL-GAS
EQUATION
Volumes of Gases in Chemical Reaction
• The ideal gas equation relates the number of moles of
a gas to P, V, and T.
• Thus, the volume of the gases consumed or produced
during the reaction can be calculated.
26. GAS MISTURES AND PARTIAL PRESSURE
Dalton’s Law of Partial Pressure
The total pressure of a mixture of gases equals the sum
of the pressures that each would exert if it were present
alone.
Partial Pressure: The pressure exerted by a particular
component of a mixture of a gas.
28. GAS MISTURES AND PARTIAL PRESSURE
Partial Pressures and Mole Fractions
• Because each gas in a mixture behave independently, we can
relate the amount of a given gas in a mixture to its partial
pressure.
(P1/Pt) = (n1 RT/V) / (nt RT/V) = n1/nt
• n1/nt is called mole fraction of gas 1. – denoted as X1
• The mole fraction , X is a dimensionless number that express
the ratio of the number of moles
• Rearrange the equation: P = (n1/n2) Pt = X1Pt
• Thus, the partial pressure of a gas in a mixture is its moles
fraction times the total pressure
29. GAS MISTURES AND PARTIAL PRESSURE
Collecting Gases over Water
• When one collects a gas over water, there is water vapor
mixed in with the gas.
• To find only the pressure of the desired gas, one must subtract
the vapor pressure of water from the total pressure.
Ptotal = Pgas + PH20
• Refer appendix b
30. GAS MISTURES AND PARTIAL PRESSURE
EXAMPLE:
Acetylene (C2H2) is produced in the laboratory when calcium
carbide (CaC2) reacts with water:
CaC2(s) + 2H2O(l) C2H2(g) + Ca(OH)2(aq)
A collected sample of acetylene has a total gas pressure of
738 torr and a volume of 523 mL. At the temperature of the
gas (23oC), the vapor pressure of water is 21 torr. How
many grams of acetylene are collected?
31. KINETIC-MOLECULAR THEORY
• This is a model that aids in our
understanding of what happens to
gas particles as environmental
conditions change
32. KINETIC-MOLECULAR THEORY
• The kinetic-molecular theory is summarized by the following
statements:
1. Gases consist of large numbers of molecules that are in
continuous, random motion
2. The combined volume of all the molecules of the gas is
negligible relative to the total volume in which the gas is
contained.
3. Attractive and repulsive forces between gas molecules are
negligible.
33. KINETIC-MOLECULAR THEORY
4. Energy can be transferred between molecules during
collisions, but the average kinetic energy of the molecules
does not change with time, as long as the temperature of
the gas remains constant.
5. The average kinetic energy of the molecules is
proportional to the absolute temperature.
• This theory explains both pressure and temperature at
molecular level.
• Pressure: caused by collisions of the molecules with the
wall of the container.
• Absolute Temperature: measure of kinetic energy of its
molecule. If 2 different gases are at the same T, theit
molecules have the same average kinetic energy (stat 5)
34. KINETIC-MOLECULAR THEORY
Distribution of Molecular
Speed
• The curve shows the fraction of molecules moving at each
speed.
• Higher T, a larger fraction of molecules moves at greater
speeds; the distribution curve has shifted to the right toward
higher speed and hence average kinetic energy.
35. KINETIC-MOLECULAR THEORY
Distribution of Molecular Speed
• Root-mean-square (rms) speed- u: The
speed of molecules possessing average
kinetic energy.
• rms speed is important bcoz: The
average kinetic energy of the gas
molecules in a sample, ε, related
directly to u2 : ε = ½ mu2
m = mass of individual molecules
• Mass does not change with T, thus the increase in the average
kinetic energy as the T increases implies that the rms speed (also
the average speed ) of molecules likewise increases with the
increase of T.
36. KINETIC-MOLECULAR THEORY
Application to the Gas Laws
• Effect of a volume increase at constant temperature:
-Constant T: A.K.E unchanged. rms speed,u, unchanged.
- Increased Volume: molecules move a longer distance
between collision. So, fewer collisions per unit time with
container walls & the pressure decreases. – BOYLE’S LAW
37. KINETIC-MOLECULAR THEORY
• Effect of a temperature increase at constant volume:
-Increase T: increased A.K.E thus increase in u.
- If no change in volume, more collision between moleculesand
with the walls.
- Thus, pressure increase.
- CHARLES’S LAW
38. MOLECULAR EFFUSION AND DIFFUSION
Graham’s Law of Effusion
• Effusion (a process by which a gas
escapes from its container) rate of a gas
is inversely proportional to the square
root of its molar mass.
• If we have 2 gases at the same T & P in
containers with identical pinholes.
• If the rates of effusion of the two
substances are r1 and r2 and their
respective molar masses are M1 & M2,
Graham’s Law states:
√
r1 M2
=
r2 M1
39. MOLECULAR EFFUSION AND DIFFUSION
Graham’s Law of Effusion
√
r1 M2
=
r2 M1
• Above equation compares
the rates of effusion of two
different gases under
identical conditions; it
indicates that the lighter gas
effuses more rapidly.
• To escape, molecules have to hit the hall. The faster they move,
the greater they will hit the wall.
• Thus, rate of effusion is directly proportional to the rms speed.
41. MOLECULAR EFFUSION AND DIFFUSION
Diffusion and Mean Free Path
• Diffusion is the spread of one substance throughout a
space or throughout a second substance.
• Faster for lower mass molecules.
42. REAL GASES: DEVIATIONS FROM
IDEAL BEHAVIOUR
• In the real world, the
behavior of gases only
conforms to the ideal-gas
equation at relatively high
temperature and low
pressure.
• Real gases do not behave
ideally at high pressure.
43. REAL GASES: DEVIATIONS FROM
IDEAL BEHAVIOUR
• The deviation also depends on T.
• We can see that, as the P
increased, the behavior of the gas
more nearly approaches the ideal
gas
• Thus, the deviations from ideal
behavior increase as T decrease
and becoming significant near the
T at which the gas is converted
into liquid.
44. REAL GASES: DEVIATIONS FROM
IDEAL BEHAVIOUR
Why Real Gases Deviate From Ideal-Gas
• Assumptions: Molecules of ideal gas are assumed to occupy
no space and have no attractions for one another.
• However: Real molecules do have finite volume, and attract
one another.
• Fig: (low P) The free unoccupied space in which molecules
can move is less than the container volume.
• Thus, the free volume of the available to the molecules is
essentially the entire volume of the container.
45. REAL GASES: DEVIATIONS FROM
IDEAL BEHAVIOUR
• Increase P: The free space in which the molecules can move
become smaller fraction of the container volume.
• Thus, the gas volumes tend to be slightly greater than those
predicted by the ideal-gas equation.
• In addition, the attractive forces between molecules also
play at short distance.
• The impact is increased.
• However, the attraction between molecules also increased
due to the short distance.
• As a result, the pressure is less than the ideal gas.
46. REAL GASES: DEVIATIONS FROM
IDEAL BEHAVIOUR
The van der Waals Equation
• The ideal-gas equation can be adjusted to take these
deviations from ideal behavior into account.
• The corrected ideal-gas equation is known as the van der
Waals equation.
•
The van der Waals Equation
n2a ) (V − nb) = nRT
(P + 2
V