This resume summarizes Sachin Khante's experience as a power electronics design engineer. He has over 6 years of experience in research and development related to power electronics, electric machines, and embedded control. His experience includes designing various power converters and inverters using simulation tools like Proteus, Orcad, and LTSpice. He is proficient in C programming and has worked on projects involving Arduino, IoT, and wireless charging systems.

1. SACHIN KHANTE
Mobile: +91 9970902150/7276618969
Email: sachin.khante23@gmail.com
OBJECTIVE
Seeking the position of a power electronics design engineer in a developing organization where
my skills, experience and knowledge of updated electronic design techniques would boost the
development of electronic products in the organization.
PROFILE
• Total 6 years of experience in research and development in the areas of power
electronics, electric machine drives, and embedded control.
• Having experience as an Electronics Design and Embedded System Engineer about the
latest technologies used in the development of different power electronic products.
• Modeling and simulation experiences with various dc/dc, ac/dc, dc/ac power converters,
electric machines and related control algorithms.
• Both practical as well as theoretical knowledge of Different Electrical Instruments.
• Responsible for delivering the finished SMPS/Converter to customer from specification
to finished SMPS/Converter to customer and able to lead a team.
• Experience with embedded systems design using the Arduino programming
environment, ESP8266 WiFi Module.
JOB RESPONSIBILITIES
• Professional Skills: Power Electronics and Embedded Engineer.
• Designing Invertors using different efficient Topologies.
• Software Skills: Proteus, Orcad, EPLAN, Diptrace PCB design, Easy pc PCB.
• Knowledge of C language.
• Analog and digital Circuit study, Design, analysis and simulation using Proteus, Orcad,
LT-SPICE.
• Knowledge of Simulation software such as OrCad, LTSpice etc.
• Knowledge of Matlab Simulink.
• Circuit analysis, simulation and testing in inverter and SMPS circuits.
• Final designing Fault finding in PCB & Circuit.
• Analysis and troubleshooting of test equipment.
• R&D in projects according in customer requirement.
• Testing of PCBs, Connectors, Power Supplies and Signal Conditioners.
• PCB circuit design using EasyPCB, Proteus, Express PCB.
• Knowledge in Power Electronics, DC-DC Converters, SMPS Full Bridge, Half Bridge.
• Arduino Programming and Internet of Things (IOT) applications.
EDUCATIONAL QUALIFICATION
• Bachelor of Engineering (B.E) in Electronics and Telecommunications from Nagpur
University, Maharashtra - Year 2009 with 65%.
• HSC – Maharashtra State Board - Year 2005 with 84%.
• SSC - Maharashtra State Board – Year 2003 with 78%.
PROFESSIONAL EXPERIENCE
Organization Industry From To Role
Hinduja Tech
Limited
Service Jan
2016
Till
Now
Senior Hardware Engineer
(Embedded Division)

2. SACHIN KHANTE
Mobile: +91 9970902150/7276618969
Email: sachin.khante23@gmail.com
Inductotherm India
Pvt Ltd
Manufacturing May
2013
Dec
2015
Power Electronics Engineer
(Design and service
Department)
Induction
Equipment India
Pvt Ltd
Manufacturing April
2011
April
2013
Power Electronics Engineer
(Design and service
Department)
Sprance Technology Manufacturing April
2010
Oct
2010
Junior Engineer
PROJECT EXPERIENCE
HINDUJA TECH PVT LIMITED JAN 2016 TO TILL DATE
Project Name: Development of Automotive Solid State Relay (German Client)
Project Description:
• In the Automotive SSR Development, existing automotive EMR Relays are replaced by
Solid State Relay. Advantage of Solid State Relays are as follows-
• It has diagnostic load current feedback which controls load efficiently by PWM Method
• It has Overvoltage, Overcurrent, Overtempreture Protection.
Activities:
• Concept designing.
• Component Selection as per Client’s specific requirement.
• Designing Electronic circuit and making schematic using Orcad.
• Simulation with LT Spice.
• ESD Protection Circuit Design for Product Design as per requirement .
• Thermal Management in Enclosed Solid State Relay.
• Done PCB Design.
• Involved in end to end Product Delivery to the Customer.
Project Name: Foreign Object Detection (FOD) in Wireless Electric Vehicle Charging. (US
Client)
Project Description:
• During wireless charging, induction power transfer occurs from primary induction coil to
secondary induction coil. But if there is any foreign object come in contact with any
power coil, the object gets heated, due to induction heating principle. Thus to avoid this
object heating and power loss. Hence, we use FOD system which is responsible for
immediate shut down charging process when any foreign object detected.
• Using FOD system not only safely but also Efficient Charging can be achieved.
Activities:
• Worked on Power Dissipation in Power Supply.
• Designed and tested Control feedback Circuit for LC Resonant Circuit.
• Calculation and Implementation of FOD loops in Resonant Circuit.
• Algorithm for FOD System.
• Working on the schematic and simulation of FOD circuit using Orcad.
• Developed prototype PCB for FOD Analog Board.

3. SACHIN KHANTE
Mobile: +91 9970902150/7276618969
Email: sachin.khante23@gmail.com
• Preparing Test Jigs for testing FOD Analog Board and Wireless Electric Charging
System.
Project Name: IOT based Serial to Wi-Fi Communication.
Project Description:
• To develop IoT hardware using ESP8266 Wi-Fi Device and Arduino for Accelerometer
and Temperature sensors and send data to Cloud. Data from sensors captured through
serial port of Arduino Uno where sensor are connected at Input pins and process data
to WIFI ESP8266 device. Once data received on ESP8266 WIFI unit transmit data to
Cloud server.
Activities:
• Selection of components and designing the circuit board.
• Testing different type of sensors like accelerometer and temperature sensors.
• Designed hardware using Microcontroller and Wi-Fi Module.
• Programming Microcontroller using Embedded C.
• Selection Component like Microcontroller, Sensors and Wi-Fi Module.
INDUCTOTHERM INDIA PVT LTD MAY 2013 TO DEC 2015
Project Name: FEEDBACK CONTROL SYSTEM OF INVERTERS
• Worked on Medium and High frequency converter using full bridge inverter using IGBT
(series R-L-C / Parallel R-L-C tank circuit)
INDUCTION EQUIPMENT INDIA PVT APRIL 2011 TO APRIL 2013
Project Name: WORKING ON MOSFET AND IGBT BASED INVERTERS
Project Description:
• Designing of Power circuits and feedback Control System of Inverters using Analog
and Digital Circuit.
Activities:
• Actively involved in requirement analysis, design, implementing and testing of the
system
• Working on the schematic and simulation of Inverter circuit using Proteus.
• Developed Prototype PCB for Analog Inverter Board.
• Preparing Test Jigs for testing Analog Inverter Board.
Project Description:
• Worked on Medium and High frequency converter using following topologies
• 1. Half bridge inverter using MOSFET (series R-L-C tank circuit) for 50KW, 80KHZ
for Induction Hardening Machine.
• 2. Full bridge inverter using IGBT (series R-L-C tank circuit) for 100KW, 10KHZ
for Induction Billet Heaters in Forging Industries.

4. SACHIN KHANTE
Mobile: +91 9970902150/7276618969
Email: sachin.khante23@gmail.com
Activities:
• Actively involved in requirement analysis, design, implementing and testing of the
system.
• Designing of Power circuits and feedback Control System of Inverters using Analog and
Digital Circuit.
• Designing and prototyping of IGBT and MOSFET Gate Drivers.
• Working on the schematic and simulation for logic development of Protection Circuits in
Inverters.
• Developed Prototype PCB for MOSFET and IGBT Gate Drivers.
• Generated Failure Mode Effective Analysis (FMEA) reports for GATE Drivers.
• Preparing Test Jigs for testing Gate Drivers and Inverter System.
SPRANCE TECHNOLOGY APRIL 2010 TO OCTOBER
2010
Project Name: RF COMMUNICATION BETWEEN TWO PC
This project is about to connect two machines using RF communication technology. The RF
communication is done using Zigbee module to provide secured wireless networking. In this
project HyperTerminal of both the PC can be configured for Duplex communication. Based on
AT commands the two modules can be configured for Unicast communication.
• Done end to end testing of the system
Tools: AT commands, Zigbee RF Modules.
TRAINING ATTENDED
Training attended for Embedded System from OASIS Pune.
DURATION – AUG 2009 TO FEB 2010
PERSONEL PROFILE
Date of Birth : Aug. 23rd, 1987
Nationality : Indian
Marital Status : Married
Language Proficiency : English, Hindi, Marathi
Address for Correspondence : Thergaon, Pune.India.
Project Description:
Activities:
• Actively involved in requirement analysis, designing and implementing the
system.
• Designing Circuit and Schematic using Proteus.
• Done Programming using AT Commands.
• Designed power supply.