MARKET SURVEY.pdf
•
0 likes•88 views
The document provides information on various types of materials used for carpentry including plywood, MDF, HDF, particle board, laminates, and veneers. It lists the standard sizes, thicknesses, uses, and costs of these materials. Popular materials for countertops like granite, quartz and honex are also discussed along with their thicknesses and rates. Modular units for portable prefabricated structures are mentioned as well.
Report
Share
Report
Share
Download to read offline
Recommended
Flooring
This document provides an overview of different types of flooring materials including hard flooring options like wood, stone, and tile as well as soft flooring options like carpet and rugs. It describes various wood flooring styles, common stone flooring materials like marble, limestone, and travertine, ceramic and other tile types, resilient flooring materials like vinyl and laminate, and different carpet fiber and texture options.
Floorfinish by vikesh
Hard, semi-hard, and soft floor finishes are classified. Hard floor finishes include cement, terrazzo, stone, ceramic tiles, resin, and wood. Semi-hard finishes are thermoplastic, vinyl, linoleum, and rubber sheets. Soft floor finishes refer to carpets, which are woven, tufted, pile bonded, needle punched, or electrostatically flocked. The document then provides details on the composition and uses of different materials for hard floor finishes like granite, marble, slate, ceramic tiles, thermoplastic, vinyl, linoleum, wood and methods of cleaning carpets.
Wall finishes
Wall finishes are used to enhance the interior or exterior appearance of structures. Common wall finishes include paint, wallpaper, tiles, and panels made of materials like wood, stone and glass. Proper installation and maintenance of wall finishes is important. Various techniques are used for different types of wall finishes to achieve unique aesthetic effects. Common types of wall finishes mentioned are cement texture finish, plaster of Paris finish, gypsum plaster finish, glass mosaic finish, laminate finish and marble powder finish.
Veneer and laminates
Veneer is a thin decorative wood covering that is applied to other materials. It is produced from high quality logs by steaming or pickling the logs and then slicing or peeling them into thin leaves ranging from 0.8 to 3mm thick. Laminate is a sheet made by bonding two or more layers, and is not suitable for exterior use. There are two main types: high pressure laminates which are hard decorative sheets commonly used to cover furniture, and low pressure laminates which are decorative papers bonded to particleboard or fiberboard. Veneer and laminate have various uses including decorative furniture and joinery, as well as structural applications like wet area panelling and flooring.
Wood
The document discusses different types of wood, their characteristics, uses, and processing. It defines the differences between wood and timber, and describes softwood and hardwood. It then covers the internal section of wood including the pith, heartwood, sapwood, and growth layers. The rest of the document summarizes different wood-based boards like plywood, blockboard, and MDF. It also discusses veneers, types of veneers, and laminates used in woodwork.
Wood and laminates
A presentation to help the reader understand various types of industrial timber, laminates and their uses.
Building Materials & Construction Module - 5
To recognize good construction materials based on properties, Characteristics, Location, Activities according to IS standards for wall finishes like Plastering, painting and finishing
Flooring and types of flooring
Floors serve to divide buildings into levels and support occupants, furniture, and equipment. There are different types of floors including basement, ground, and upper floors. Floors must provide adequate strength, fire resistance, sound insulation, damp resistance, and thermal insulation. Common flooring materials include ceramic tiles, concrete, wood, and stone. Selection of flooring depends on factors like initial cost, appearance, cleanliness, durability, insulation, and maintenance requirements. Mud, brick, flagstone and concrete are some traditional flooring types described in the document.
Recommended
Flooring
This document provides an overview of different types of flooring materials including hard flooring options like wood, stone, and tile as well as soft flooring options like carpet and rugs. It describes various wood flooring styles, common stone flooring materials like marble, limestone, and travertine, ceramic and other tile types, resilient flooring materials like vinyl and laminate, and different carpet fiber and texture options.
Floorfinish by vikesh
Hard, semi-hard, and soft floor finishes are classified. Hard floor finishes include cement, terrazzo, stone, ceramic tiles, resin, and wood. Semi-hard finishes are thermoplastic, vinyl, linoleum, and rubber sheets. Soft floor finishes refer to carpets, which are woven, tufted, pile bonded, needle punched, or electrostatically flocked. The document then provides details on the composition and uses of different materials for hard floor finishes like granite, marble, slate, ceramic tiles, thermoplastic, vinyl, linoleum, wood and methods of cleaning carpets.
Wall finishes
Wall finishes are used to enhance the interior or exterior appearance of structures. Common wall finishes include paint, wallpaper, tiles, and panels made of materials like wood, stone and glass. Proper installation and maintenance of wall finishes is important. Various techniques are used for different types of wall finishes to achieve unique aesthetic effects. Common types of wall finishes mentioned are cement texture finish, plaster of Paris finish, gypsum plaster finish, glass mosaic finish, laminate finish and marble powder finish.
Veneer and laminates
Veneer is a thin decorative wood covering that is applied to other materials. It is produced from high quality logs by steaming or pickling the logs and then slicing or peeling them into thin leaves ranging from 0.8 to 3mm thick. Laminate is a sheet made by bonding two or more layers, and is not suitable for exterior use. There are two main types: high pressure laminates which are hard decorative sheets commonly used to cover furniture, and low pressure laminates which are decorative papers bonded to particleboard or fiberboard. Veneer and laminate have various uses including decorative furniture and joinery, as well as structural applications like wet area panelling and flooring.
Wood
The document discusses different types of wood, their characteristics, uses, and processing. It defines the differences between wood and timber, and describes softwood and hardwood. It then covers the internal section of wood including the pith, heartwood, sapwood, and growth layers. The rest of the document summarizes different wood-based boards like plywood, blockboard, and MDF. It also discusses veneers, types of veneers, and laminates used in woodwork.
Wood and laminates
A presentation to help the reader understand various types of industrial timber, laminates and their uses.
Building Materials & Construction Module - 5
To recognize good construction materials based on properties, Characteristics, Location, Activities according to IS standards for wall finishes like Plastering, painting and finishing
Flooring and types of flooring
Floors serve to divide buildings into levels and support occupants, furniture, and equipment. There are different types of floors including basement, ground, and upper floors. Floors must provide adequate strength, fire resistance, sound insulation, damp resistance, and thermal insulation. Common flooring materials include ceramic tiles, concrete, wood, and stone. Selection of flooring depends on factors like initial cost, appearance, cleanliness, durability, insulation, and maintenance requirements. Mud, brick, flagstone and concrete are some traditional flooring types described in the document.
Floorfinishes 140306101020-phpapp02
The document discusses various types of flooring materials. It provides details about the ingredients, manufacturing process, installation, defects and advantages/disadvantages of different floor finishes like terrazzo, stone, timber, brick, cement concrete and vinyl flooring. Terrazzo flooring is made from concrete with marble chips and can be refinished repeatedly. Stone flooring uses sedimentary, igneous and metamorphic rocks. Timber flooring is available in solid and engineered varieties. Brick and cement concrete are durable but can develop cracks over time, while vinyl flooring comes in various patterns and textures.
Plastering
- Plastering is the process covering rough surfaces and uneven surfaces with a plastic material, called plaster or mortar to obtain an even, smooth, regular, clean, durable surface.
Types of soft floorings
Soft flooring comes in rolls or flexible tiles and includes options like carpet, linoleum, vinyl, and cork. Carpet is made of materials like wool, nylon, and polyester and comes in various colors, patterns, and pile depths. Linoleum is made from natural materials and has anti-bacterial properties, while vinyl is man-made but durable and waterproof, making it suitable for wet areas. Cork is a natural, water-resistant product that is comfortable and environmentally friendly.
ACH 121 Lecture 14 (Finishes)
Interior finishes include materials used on floors, walls, and ceilings that provide aesthetic qualities and protection. Finishes influence the look and feel of a space and include options like gypsum wallboard, wood flooring, carpet, ceiling tiles, and trim. Proper specification of materials and workmanship is important to achieve the desired quality.
Plastering
Plaster is a building material used for the protective or decorative coating of walls and ceilings and for moulding and casting decorative elements. In English "plaster" usually means a material used for the interiors of buildings, while "render" commonly refers to external applications. Another imprecise term used for the material is stucco, which is also often used for plasterwork that is ...
plastering contractors near me
interior plastering techniques
plastering walls
how to do plastering
pool plastering companies near me
plastering walls techniques
plastering drywall
plastering ceilings
types of plaster wall construction
types of plastering techniques
types of plaster ceiling finishes
methods of plastering
different kinds of plaster
interior plastering techniques
plaster types and uses
different types of plaster walls
types of plastering techniques
types of interior plaster
plaster types and uses
different kinds of plaster
types of plaster ceiling finishes
different plaster wall finishes
how are plaster walls constructed
cement plaster finish types
different types of plaster finishes
types of interior plaster
types of plastering techniques
plaster types and uses
types of plaster ceiling finishes
types of plaster ceilings
types of plaster of paris
plaster supply stores
WALL COVERING , WALLPAPER,PAINT AND THEARE TYPES
Wall covering and theare types
types of wall covering
paint wall covering
stone wall covering
metal wall covering
fabric wall covering
and many other types of wall covering
by ZAIDUL HAQUE
Wooden Flooring
This document discusses different types of wooden flooring materials, including their characteristics, costs, and installation methods. It covers laminate flooring, engineered wood flooring, and solid wood flooring. Laminate flooring is the most affordable starting at Rs. 250/sqm, while solid wood is the most expensive. Engineered wood provides durability between laminate and solid wood at costs of Rs. 1600-14,200/sqm. The document also outlines merits and demerits of each type and describes common installation techniques like floating, glued, and nailed. Proper acclimation and stable indoor conditions are necessary to prevent issues from temperature and humidity changes.
Flooring Design and Materials
Floors are the walking surfaces of buildings and vehicles. Flooring refers to permanent floor coverings and includes materials like carpet, resilient flooring such as vinyl, and hard surfaces like wood, ceramic tile and stone. Floors must meet building codes for safety and require adequate strength, insulation, fire resistance and installation. Common flooring materials include brick, stone, concrete, glass, tiles, linoleum, marble, mosaic, carpet, cork, rubber, asphalt, terrazzo, plastic, and wood. Requirements of good floors include strength, damp resistance, fire resistance, insulation and proper installation.
Mdf ppt final
Medium density fiberboard (MDF) is a composite wood product made from compressed wood fibers bonded with wax and resin. It is similar to particleboard and hardboard. MDF comes in various thicknesses and is used for applications like cabinets, furniture, signs, and more. It has advantages over solid wood like being more stable, uniform, and easier to work with, but also has disadvantages like being heavier and causing more wear on tools. Proper safety precautions should also be taken when working with MDF due to potential formaldehyde exposure.
types of Doors
The document discusses different types of doors. It describes 18 types of doors including battened and ledged doors, which are the simplest type using vertical battens and horizontal ledges. Braced and ledged doors add diagonal braces for increased strength. Framed and ledged doors improve on this with vertical styles. Panel doors consist of a frame with vertical styles and horizontal rails containing wood or other panels. Other door types discussed include glazed doors, louvered doors, revolving doors, sliding doors, and flush doors.
Industrial Timber.pptx
This document provides information on various types of industrial timber, including veneers, plywood, fibreboards, impregnated boards, compressed boards, block boards, and laminated boards. It describes the manufacturing processes and properties of each type of industrial timber. The key types discussed are used to make furniture, construction materials, and other wood products.
Wall covering bob
This document discusses different types of wall coverings used for interior decoration. It describes nine main types: paint, wallpaper, wooden wall covering, fabric wall covering, metal wall covering, glass wall covering, ceramic tiles, stone wall covering, and vinyl/plastic wall covering. Each type is briefly characterized, such as wallpaper being made of rolls that are hung vertically, or ceramic tiles being flat slabs made of materials like porcelain.
Laminates and Veneer
This document discusses laminates and veneers. It begins by describing the manufacturing process of laminates, which involves layering different papers soaked in resins and pressing them together under heat and pressure. It then discusses the advantages of laminates like their durability and ease of cleaning. Veneers are described as thin wood slices glued to panels. The veneer manufacturing process involves slicing, peeling, grading, and pressing wood logs. Veneers provide aesthetic wood looks at low cost and allow for wood utilization. Popular laminate and veneer brands and their typical pricing are also listed.
FLOOR FINISHES AND COVERINGS
This document provides information on different types of floor finishes. It discusses the structure and components of a floor. It then describes various flooring materials like stone, tile, terrazzo, brick, cement concrete and timber flooring. For each material, it provides details on their manufacture, sizes, properties, advantages and uses. Stone flooring discussed in detail includes marble, granite and kota stone. For tiles, both ceramic and vitrified tiles are explained. Mosaic and terrazzo flooring techniques are also summarized.
Wallpapers types[1]
This document discusses different types of wallpapers, including nonwoven, bamboo, liner, vinyl, fabric-backed foil, morie, embossed, flocked, grasscloth, and photo wall murals. It provides details on the materials, textures, installation difficulty, washability, and removal process for each type. The types range from easy to install and remove options like nonwoven, vinyl and embossed to more delicate varieties like bamboo, flock and grasscloth that require extra care during installation due to stainability.
Brick partition walls
a study on brick partition walls, definition and types with advantages and disadvantages, and features
HardWood Floors
Wood floors provide many benefits over other flooring types such as carpet. They can last the lifetime of a building if refinished periodically and provide better insulation than other materials. There are several types of wood flooring including solid wood, engineered wood, and laminate floors. Solid wood floors can be refinished multiple times while laminate floors have printed photographic images and cannot be refinished. Bamboo floors are becoming increasingly popular for their light color and sustainability. Proper installation methods depend on the flooring type and location in the home.
Tiles
This document provides information on building materials and construction tiles. It discusses why tiles are a good choice, how they are manufactured, and the different types of tiles based on material and application. The main types discussed are ceramic, vitrified, glass mosaic, stoneware, and terracotta tiles. Vitrified tiles are highlighted as having advantages over ceramic such as being stronger, more impact resistant, and having very low water absorption. A price range per square foot is also provided for the different tile types.
Engineered TIMBER PRODUCTS
Engineered timber products are manufactured from cross-laminated sheets of veneer bonded under heat and pressure. There are different types of plywood for various purposes, such as regular grade for temporary use, and marine grade for prolonged water exposure. Specialty plywood includes flexible plywood that can be rolled, and fire retardant (FR) grade for fire safety. Plywood comes in various thicknesses and sizes. MDF and particle boards are manufactured from wood fibers or particles mixed with glue and pressed. MDF is isotropic while particle boards are weaker and more sensitive to moisture. Block boards are made of wood blocks for applications like shelves and furniture. Veneer is thin wood sliced for covering panels, while laminates
Wallpaper m
Interior design is the art and science of understanding people's behavior to create functional interior spaces. Interior designers focus on planning and functional design, while decorators focus more on decoration and aesthetics. Wallpaper is a material used to cover and decorate interior walls that provides decoration, protection, and helps set the mood. It comes in various materials, designs, sizes and is installed using wallpaper paste. Key factors when selecting wallpaper include price, quality, country of origin, design, and ease of removal. Popular brands discussed are Marcel, Harlequin, and Casamance.
Market Survey on Plywood
The document provides information about plywood and MDF. It defines plywood as a manufactured wood panel made of thin layers of wood bonded together. There are two main types of plywood: commercial plywood and waterproof plywood. The document also defines MDF as an engineered wood product made of softwood fibers bonded under heat and pressure. The two main types of MDF are commercial MDF and waterproof MDF. The document then describes the manufacturing processes for both plywood and MDF.
Laminates Veneers & Plywood
1. The document discusses different types of decorative surface materials like laminates, veneers, plywood and their manufacturing processes.
2. It explains the types of laminates based on manufacturing process and surface finish. The main types are low pressure, high pressure, matte finish, glossy finish, textured finish and digital laminates.
3. Veneers are thin wood sheets used for decorative purposes. The manufacturing process of veneers involves slicing logs, grading, trimming and joining. Common types are oak, teak, walnut and birch veneers.
4. Plywood is made of layers of wood pressed together with grains oriented perpendicular to each other. The manufacturing
More Related Content
What's hot
Floorfinishes 140306101020-phpapp02
The document discusses various types of flooring materials. It provides details about the ingredients, manufacturing process, installation, defects and advantages/disadvantages of different floor finishes like terrazzo, stone, timber, brick, cement concrete and vinyl flooring. Terrazzo flooring is made from concrete with marble chips and can be refinished repeatedly. Stone flooring uses sedimentary, igneous and metamorphic rocks. Timber flooring is available in solid and engineered varieties. Brick and cement concrete are durable but can develop cracks over time, while vinyl flooring comes in various patterns and textures.
Plastering
- Plastering is the process covering rough surfaces and uneven surfaces with a plastic material, called plaster or mortar to obtain an even, smooth, regular, clean, durable surface.
Types of soft floorings
Soft flooring comes in rolls or flexible tiles and includes options like carpet, linoleum, vinyl, and cork. Carpet is made of materials like wool, nylon, and polyester and comes in various colors, patterns, and pile depths. Linoleum is made from natural materials and has anti-bacterial properties, while vinyl is man-made but durable and waterproof, making it suitable for wet areas. Cork is a natural, water-resistant product that is comfortable and environmentally friendly.
ACH 121 Lecture 14 (Finishes)
Interior finishes include materials used on floors, walls, and ceilings that provide aesthetic qualities and protection. Finishes influence the look and feel of a space and include options like gypsum wallboard, wood flooring, carpet, ceiling tiles, and trim. Proper specification of materials and workmanship is important to achieve the desired quality.
Plastering
Plaster is a building material used for the protective or decorative coating of walls and ceilings and for moulding and casting decorative elements. In English "plaster" usually means a material used for the interiors of buildings, while "render" commonly refers to external applications. Another imprecise term used for the material is stucco, which is also often used for plasterwork that is ...
plastering contractors near me
interior plastering techniques
plastering walls
how to do plastering
pool plastering companies near me
plastering walls techniques
plastering drywall
plastering ceilings
types of plaster wall construction
types of plastering techniques
types of plaster ceiling finishes
methods of plastering
different kinds of plaster
interior plastering techniques
plaster types and uses
different types of plaster walls
types of plastering techniques
types of interior plaster
plaster types and uses
different kinds of plaster
types of plaster ceiling finishes
different plaster wall finishes
how are plaster walls constructed
cement plaster finish types
different types of plaster finishes
types of interior plaster
types of plastering techniques
plaster types and uses
types of plaster ceiling finishes
types of plaster ceilings
types of plaster of paris
plaster supply stores
WALL COVERING , WALLPAPER,PAINT AND THEARE TYPES
Wall covering and theare types
types of wall covering
paint wall covering
stone wall covering
metal wall covering
fabric wall covering
and many other types of wall covering
by ZAIDUL HAQUE
Wooden Flooring
This document discusses different types of wooden flooring materials, including their characteristics, costs, and installation methods. It covers laminate flooring, engineered wood flooring, and solid wood flooring. Laminate flooring is the most affordable starting at Rs. 250/sqm, while solid wood is the most expensive. Engineered wood provides durability between laminate and solid wood at costs of Rs. 1600-14,200/sqm. The document also outlines merits and demerits of each type and describes common installation techniques like floating, glued, and nailed. Proper acclimation and stable indoor conditions are necessary to prevent issues from temperature and humidity changes.
Flooring Design and Materials
Floors are the walking surfaces of buildings and vehicles. Flooring refers to permanent floor coverings and includes materials like carpet, resilient flooring such as vinyl, and hard surfaces like wood, ceramic tile and stone. Floors must meet building codes for safety and require adequate strength, insulation, fire resistance and installation. Common flooring materials include brick, stone, concrete, glass, tiles, linoleum, marble, mosaic, carpet, cork, rubber, asphalt, terrazzo, plastic, and wood. Requirements of good floors include strength, damp resistance, fire resistance, insulation and proper installation.
Mdf ppt final
Medium density fiberboard (MDF) is a composite wood product made from compressed wood fibers bonded with wax and resin. It is similar to particleboard and hardboard. MDF comes in various thicknesses and is used for applications like cabinets, furniture, signs, and more. It has advantages over solid wood like being more stable, uniform, and easier to work with, but also has disadvantages like being heavier and causing more wear on tools. Proper safety precautions should also be taken when working with MDF due to potential formaldehyde exposure.
types of Doors
The document discusses different types of doors. It describes 18 types of doors including battened and ledged doors, which are the simplest type using vertical battens and horizontal ledges. Braced and ledged doors add diagonal braces for increased strength. Framed and ledged doors improve on this with vertical styles. Panel doors consist of a frame with vertical styles and horizontal rails containing wood or other panels. Other door types discussed include glazed doors, louvered doors, revolving doors, sliding doors, and flush doors.
Industrial Timber.pptx
This document provides information on various types of industrial timber, including veneers, plywood, fibreboards, impregnated boards, compressed boards, block boards, and laminated boards. It describes the manufacturing processes and properties of each type of industrial timber. The key types discussed are used to make furniture, construction materials, and other wood products.
Wall covering bob
This document discusses different types of wall coverings used for interior decoration. It describes nine main types: paint, wallpaper, wooden wall covering, fabric wall covering, metal wall covering, glass wall covering, ceramic tiles, stone wall covering, and vinyl/plastic wall covering. Each type is briefly characterized, such as wallpaper being made of rolls that are hung vertically, or ceramic tiles being flat slabs made of materials like porcelain.
Laminates and Veneer
This document discusses laminates and veneers. It begins by describing the manufacturing process of laminates, which involves layering different papers soaked in resins and pressing them together under heat and pressure. It then discusses the advantages of laminates like their durability and ease of cleaning. Veneers are described as thin wood slices glued to panels. The veneer manufacturing process involves slicing, peeling, grading, and pressing wood logs. Veneers provide aesthetic wood looks at low cost and allow for wood utilization. Popular laminate and veneer brands and their typical pricing are also listed.
FLOOR FINISHES AND COVERINGS
This document provides information on different types of floor finishes. It discusses the structure and components of a floor. It then describes various flooring materials like stone, tile, terrazzo, brick, cement concrete and timber flooring. For each material, it provides details on their manufacture, sizes, properties, advantages and uses. Stone flooring discussed in detail includes marble, granite and kota stone. For tiles, both ceramic and vitrified tiles are explained. Mosaic and terrazzo flooring techniques are also summarized.
Wallpapers types[1]
This document discusses different types of wallpapers, including nonwoven, bamboo, liner, vinyl, fabric-backed foil, morie, embossed, flocked, grasscloth, and photo wall murals. It provides details on the materials, textures, installation difficulty, washability, and removal process for each type. The types range from easy to install and remove options like nonwoven, vinyl and embossed to more delicate varieties like bamboo, flock and grasscloth that require extra care during installation due to stainability.
Brick partition walls
a study on brick partition walls, definition and types with advantages and disadvantages, and features
HardWood Floors
Wood floors provide many benefits over other flooring types such as carpet. They can last the lifetime of a building if refinished periodically and provide better insulation than other materials. There are several types of wood flooring including solid wood, engineered wood, and laminate floors. Solid wood floors can be refinished multiple times while laminate floors have printed photographic images and cannot be refinished. Bamboo floors are becoming increasingly popular for their light color and sustainability. Proper installation methods depend on the flooring type and location in the home.
Tiles
This document provides information on building materials and construction tiles. It discusses why tiles are a good choice, how they are manufactured, and the different types of tiles based on material and application. The main types discussed are ceramic, vitrified, glass mosaic, stoneware, and terracotta tiles. Vitrified tiles are highlighted as having advantages over ceramic such as being stronger, more impact resistant, and having very low water absorption. A price range per square foot is also provided for the different tile types.
Engineered TIMBER PRODUCTS
Engineered timber products are manufactured from cross-laminated sheets of veneer bonded under heat and pressure. There are different types of plywood for various purposes, such as regular grade for temporary use, and marine grade for prolonged water exposure. Specialty plywood includes flexible plywood that can be rolled, and fire retardant (FR) grade for fire safety. Plywood comes in various thicknesses and sizes. MDF and particle boards are manufactured from wood fibers or particles mixed with glue and pressed. MDF is isotropic while particle boards are weaker and more sensitive to moisture. Block boards are made of wood blocks for applications like shelves and furniture. Veneer is thin wood sliced for covering panels, while laminates
Wallpaper m
Interior design is the art and science of understanding people's behavior to create functional interior spaces. Interior designers focus on planning and functional design, while decorators focus more on decoration and aesthetics. Wallpaper is a material used to cover and decorate interior walls that provides decoration, protection, and helps set the mood. It comes in various materials, designs, sizes and is installed using wallpaper paste. Key factors when selecting wallpaper include price, quality, country of origin, design, and ease of removal. Popular brands discussed are Marcel, Harlequin, and Casamance.
What's hot (20)
Similar to MARKET SURVEY.pdf
Market Survey on Plywood
The document provides information about plywood and MDF. It defines plywood as a manufactured wood panel made of thin layers of wood bonded together. There are two main types of plywood: commercial plywood and waterproof plywood. The document also defines MDF as an engineered wood product made of softwood fibers bonded under heat and pressure. The two main types of MDF are commercial MDF and waterproof MDF. The document then describes the manufacturing processes for both plywood and MDF.
Laminates Veneers & Plywood
1. The document discusses different types of decorative surface materials like laminates, veneers, plywood and their manufacturing processes.
2. It explains the types of laminates based on manufacturing process and surface finish. The main types are low pressure, high pressure, matte finish, glossy finish, textured finish and digital laminates.
3. Veneers are thin wood sheets used for decorative purposes. The manufacturing process of veneers involves slicing logs, grading, trimming and joining. Common types are oak, teak, walnut and birch veneers.
4. Plywood is made of layers of wood pressed together with grains oriented perpendicular to each other. The manufacturing
Veneer
Wood veneer is a thin slice of wood that is glued to a core material like plywood or MDF to provide the appearance of solid wood while using less material. It is more economical than solid wood and has various textures, patterns, and shades available. The manufacturing process involves slicing thin layers from soaked logs, drying the veneers, clipping them to size, and assembling them through gluing and pressing. Veneers are used to decorate surfaces, in plywood construction for their strength, and can be bent into shapes through laminating.
furniture use , materials , market survey in india
The document provides information on various types of furniture, materials used, and their applications. It discusses the different uses of furniture in residential, commercial, street, and hospital settings. It also details the main raw materials used like plywood, wood, laminates, and their specifications. Common finishes applied to furniture like laminates, veneers, and hardware items are also outlined. Specific types of street furniture and hospital furniture are described along with the materials typically used for them.
types of timber boards
Veneer, laminate, cement fiber board, and mineral fiber board are common construction and material options. Veneer is thin slices of wood glued to panels, available in raw, paper, or phenolic backed varieties. Laminates are bonded paper layers creating durable, decorative sheets. Cement fiber board uses cement, fibers, and cellulose for durability and moisture resistance. Mineral fiber board uses mineral wool and other materials for strength and noise reduction. Each has advantages for different applications like furniture, walls, or ceilings depending on thickness and properties.
Building materials
This document provides information about medium density fiberboard (MDF) including its production process, types, and advantages. MDF is made from compressed wood fibers, wax and resin. It is produced by refining wood materials into fibers, adding resin, forming mats, and pressing them at high temperature and pressure. The document describes the MDF production steps and lists its applications for interior uses due to its smooth, affordable and strong qualities.
Veneers and laminates
Veneers and laminates are thin materials used to cover surfaces. Veneers are thin slices of wood peeled from logs in layers less than 3mm thick. Laminates are made of layered papers soaked in resin and pressed together. Veneers can enhance the aesthetics of other materials like plywood, while laminates are more durable decorative surfaces not suitable for exterior use. Common types include teak, oak, maple, and ironwood veneers and high, low, and compact pressure laminates. They are graded and used in architectural applications like walls, furniture, and flooring.
Presentation on timber and products
The document summarizes various timber products including wood polymer boards, mineral polymer composite boards, plywood, blockboards, particle boards, laminates, and doors. It describes the materials, sizes, thicknesses, advantages and disadvantages. For example, it states that wood polymer boards are made of 70% polymer, 15% wood powder and 15% additives. Plywood is made from thin layers of wood veneer rotated up to 90 degrees between layers. Laminates are manufactured using differing materials in multiple layers to achieve improved strength, stability and other properties.
Different types of boards
This short presention is about the dirrefent types of boards used in building construction, furniture, and interior design.
This presentation is intended towards Architects/ Architecture Students/ Interior designers and Building construction technology enthusiasts.
PLYWOOD
This document provides information on various wood panel products including plywood, particle board, MDF, and HDF. It defines each product, describes their manufacturing processes, common sizes and thicknesses, applications and advantages/disadvantages. Plywood is made of thin wood veneers bonded together, making it strong but susceptible to water damage if unprotected. Particle board is made from wood waste and resin and is cheaper and more uniform than wood but less attractive. MDF is very dense and uniform as it is made from wood fibers and resin under high heat and pressure.
Furniture specifications as per schedule
The document discusses materials used to make furniture and provides examples. The primary materials used are wood, metal, and plastics. Wood is still the most common material and can be used as solid wood or plywood. Plywood is more efficient than solid wood. Metals like steel and aluminum are used for frames, legs and small parts. Plastics include laminates, acrylics, molded plastics, and fiberglass, which is glass fibers embedded in resin. Examples include molded fiberglass chairs and a molded plastic stadium seat. High-quality furniture uses durable materials and techniques appropriate for the intended use.
Partitions and panelling
A brief discussion on all the materials that are readily available and can be used for partitions and paneling
Install lining, panelling and moulding - Linings presentation
Linings are internal coverings used in wall frames. Common lining materials include plasterboard, timber boards, plywood, and fiber cement sheeting. Plasterboard is made of a gypsum core with paper facing and comes in various widths and thicknesses. It is fixed with adhesive and screws or nails and finished with joint tape and compound before painting. Timber boards can be solid or veneered and are typically tongue and groove joined then painted. Proper storage of lining materials allows them to acclimate before installation.
Veneers and laminates
This document discusses veneers and laminates. It defines veneer as a thin decorative wood covering that can be applied to other materials. Veneers are produced through slicing and peeling logs before being graded, joined, and pressed onto sheet materials. Laminates are manufactured by bonding layers of paper soaked in resin under heat and pressure. The document outlines the different types, properties, uses, and manufacturing processes of veneers and laminates.
Acoustic Panels Manufacturer India!
Balaji Lightweight Insulation manufactures and supplies acoustic and thermal insulation materials in India. For over 20 years, they have produced wood wool boards and designer panels near Mumbai. Their wood wool boards are made from pine wood fibers bonded with cement and pressed at high pressure. Balaji offers various acoustic insulation panels, tiles, and custom designer boards for applications like auditoriums, theaters, and partitions.
WOOD AS A INTERIOR MATERIAL.pptx
It's incredibly durable, long-lasting, and fits snuggly with just about any aesthetic out there. Wood also appeals to homeowners also because of its ease of use. Wooden furniture and other pieces are often very handy in terms of their overall size.
GOLINKFLOOR WOOD FLOORING MANUFACTURER China
Golinkfloor®, is China’s largest manufacturer of Eureopean Oak,American Black Walnut, ASH, Burmese Teak engineered woodflooring. We at Golink floor® envision the future of contemporaryliving spaces and pride ourselves in constantly innovating toachieve our company’s vision: To represent the infinite futurepossibilities in parquet engineered wood flooring.A reflection of our brand vision is visible in our parquet engineeredwood flooring design: linking and communicating with each other,an assortment of luxury wood species handpicked from all overthe world. A perfect mix of aesthetics, natural value, durabilityand pro-environment sensitivity, our products are made for thosewho like to stand apart through their choices.We pride ourselves on a new brand - Golink Wood that caters to a variety of preferences and priorities, meeting ever-evolving consumer demands and providing a range of products to meet expectations.
External finishes
The document provides information on various external finish materials, including glass, stucco, fibre cement, timber and wood products, and slate. It discusses the properties and applications of each material. Glass is highlighted for its transparency, aesthetics, and functional uses such as doors, windows, and partitions. Stucco is described as a composite building material used for decorative wall coating. Fiber cement is a composite material made of sand, cement and cellulose fibers used for siding. Various wood types and products are outlined, including their properties, common applications, and advantages for construction. Slate is discussed as a roofing material known for its durability and low maintenance.
Timber Products
This document discusses various timber products including plywood, fibreboard, block board, laminates, and veneer. It provides information on the typical sizes, thicknesses, measurement units, manufacturers, and applications of each product. Plywood is widely used for construction purposes due to its strength and resistance to damage. Fibreboard and particle board are commonly used in furniture, home interiors, and other decorative projects. Laminates are thin surface layers that provide decorative and durable finishes. Veneer is a thin wood layer used to cover surfaces.
Wooden Flooring, Types of Wooden Flooring and Installation Process
This is the presentation on the topic Wooden Flooring where I have discussed about what is wooden flooring, it's types and installation process of wooden flooring.
Similar to MARKET SURVEY.pdf (20)
furniture use , materials , market survey in india
furniture use , materials , market survey in india
Install lining, panelling and moulding - Linings presentation
Install lining, panelling and moulding - Linings presentation
Wooden Flooring, Types of Wooden Flooring and Installation Process
Wooden Flooring, Types of Wooden Flooring and Installation Process
Recently uploaded
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...Nguyen Thanh Tu Collection
https://app.box.com/s/qspvswamcohjtbvbbhjad04lg65waylfPhilippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف أحرف الخلاف للقراء العشرةأعد أحرف الخلاف بالتلوين وصلا سمير بسيوني غفر الله له
Contiguity Of Various Message Forms - Rupam Chandra.pptx
Contiguity Of Various Message Forms - Rupam Chandra.pptx
Gender and Mental Health - Counselling and Family Therapy Applications and In...
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
How to Download & Install Module From the Odoo App Store in Odoo 17
Custom modules offer the flexibility to extend Odoo's capabilities, address unique requirements, and optimize workflows to align seamlessly with your organization's processes. By leveraging custom modules, businesses can unlock greater efficiency, productivity, and innovation, empowering them to stay competitive in today's dynamic market landscape. In this tutorial, we'll guide you step by step on how to easily download and install modules from the Odoo App Store.
KHUSWANT SINGH.pptx ALL YOU NEED TO KNOW ABOUT KHUSHWANT SINGH
INDIA`S OWN LITERARY GENIUS MR.KHUSHWANT SINGH WAS TRULY A VERY BRAVE SOUL AND WAS AWARDED WITH THE MAGIC OF WORDS BY GOD.
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
(A Free eBook comprising 3 Sets of Presentation of a selection of Puzzles, Brain Teasers and Thinking Problems to exercise both the mind and the Right and Left Brain. To help keep the mind and brain fit and healthy. Good for both the young and old alike.
Answers are given for all the puzzles and problems.)
With Metta,
Bro. Oh Teik Bin 🙏🤓🤔🥰
BPSC-105 important questions for june term end exam
BPSC-105 important questions for june term end exam
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...Nguyen Thanh Tu Collection
https://app.box.com/s/nrwz52lilmrw6m5kqeqn83q6vbdp8yzpAccounting for Restricted Grants When and How To Record Properly
In this webinar, member learned how to stay in compliance with generally accepted accounting principles (GAAP) for restricted grants.
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher, Director of Education and Skills at the OECD presents at the launch of PISA 2022 Volume III - Creative Minds, Creative Schools on 18 June 2024.
Recently uploaded (20)
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
Contiguity Of Various Message Forms - Rupam Chandra.pptx
Contiguity Of Various Message Forms - Rupam Chandra.pptx
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
How to Download & Install Module From the Odoo App Store in Odoo 17
How to Download & Install Module From the Odoo App Store in Odoo 17
KHUSWANT SINGH.pptx ALL YOU NEED TO KNOW ABOUT KHUSHWANT SINGH
KHUSWANT SINGH.pptx ALL YOU NEED TO KNOW ABOUT KHUSHWANT SINGH
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
BPSC-105 important questions for june term end exam
BPSC-105 important questions for june term end exam
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
Juneteenth Freedom Day 2024 David Douglas School District
Juneteenth Freedom Day 2024 David Douglas School District
Accounting for Restricted Grants When and How To Record Properly
Accounting for Restricted Grants When and How To Record Properly
SWOT analysis in the project Keeping the Memory @live.pptx
SWOT analysis in the project Keeping the Memory @live.pptx
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
MARKET SURVEY.pdf
- 1. MARKET SURVEY (ON CARCASS MATERIAL)
- 2. INTRODUCTION • Defination of plywood • Panels comprising at least three layers of thin wood bonded together with an adhesive. • The outer layers of the board are commonly referred to as the 'face' and 'back' and are graded based on quality. The intermediate layers are collectively known as the'core’. • It is flexible, inexpensive, workable, and re-usable, and usually can be manufactured locally.
- 3. BWP PLYWOOD • Size – 8’X4’,7’X4’, 6’X4’, 6’X3’. • Features - Waterproof BWP Grade • Thickness - 3mm,also available 6mm,9mm,12mm,18mm,19mm, • Cost – 75 per sqft
- 4. BWR PLYWOOD • BWR (Boiling water resistant) • Size – 8’X4’,7’X4’, 6’X4’, 6’X3’. • Thickness - 3mm,also available 6mm,9mm,12mm,18mm,25mm, • Cost – 65 to 80 per sqft
- 5. MR PLY • Sizes – 8’x4’ • Used in shelves, cabinets, and furniture manufacture. • Sizes - 6mm,8mm,12mm,18mm • Cost – 3600 per sheet (18mm).
- 6. COMMERCIAL PLY • Sizes – 8’x4’,7’x4’ • Commercial plywood is mainly used for interior designing (panelling). • Sizes - 6mm,8mm,12mm,19mm • Cost – 120 per sqft.
- 7. MDF (medium-density fibreboard) • MDF ( High density fibre board) • Standard panel sizes: 2400 x 1200 x 3mm, 4.75mm, 6mm, 9mm, 12mm, 16mm, 18mm, • Cost – 65 to 70 per sqft.
- 8. HDF (High Density Fibreboard) • Inside material - HDF ( High density fibre board) out side material - matt finish laminate • Standard panel sizes: 2400 x 1200 x 3mm, 4.75mm, 6mm, 9mm, 12mm, 16mm, 18mm, 25mm, 32mm. • Used in Furniture.Cabinets and shelves. • Cost – 95 to 110 per sqft
- 9. PARTICLE BOARD • Sizes – 8’x6’, 8’X4’, 8’X3’ • It is generally used for industrial applications as a raw material in the production of finished goods, such as ready-to-assemble furniture or cabinets. • Sizes - 9mm,12mm,18mm,25mm • Cost – 55 per sqft
- 10. WPC (WOOD PLASTIC COMPOSITE) • Sizes – 8’x4’ • Thickness – 19mm • Cost- 48 to 55 per sqft. • Mainly used in water resistance area like bathrooms.
- 11. LAMINATES • Sizes – 8’x4’ • Thickness – 0.8mm, 1mm • Osswhite Internel laminate - 35 to 40 per sqft • External laminates glossy finish – 1500/ sheet
- 12. VENEER • Sizes – 8’x4’ • Thickness – 4mm • Cost- 55 to 60 per sqft.
- 13. ACRYLIC • It’s a acrylic finish kitchen. • A reflective and glossy acrylic sheet for kitchen design. An acrylic sheet for kitchen interiors is made of polymer fibre and is similar to lacquer. It is a durable option as it leaves a reflective and glossy sheen on the surface of shutters which lasts for years. • Size – 8’x4’ • Thickness - 1mm,1.2mm,1.5mm • Cost – 4500/sheet
- 14. PU FINISH • PU paint stands for Polyurethane paint. • Uses in kitchens
- 15. HONEX • Thickness – 19mm to 22mm. • Cost- 2000 to2300 sqft
- 16. COUNTERTOP MATERIALS • most durable material for kitchen countertops – but the top two are granite and quartz. Granite is a natural material, with each slab unique, and beautiful colors and veining available. Man-made quartz is incredibly durable, stain- resistant, will not crack or chip. • Thickness – 20mm • Rate – 550 sq/ft.
- 17. MODULAR UNIT STORE • Modular unit means a portable prefabricated structure made at another location and moved to a site for use by a Head Start grantee to carry out a Head Start program, • Examples – Kitchen units, wardrobe study desks, drawers, crockery units etc.