This document describes an automated irrigation system based on IoT. An android-controlled robotic vehicle monitors conditions like temperature, humidity, and detects obstacles using sensors. The system can be remotely controlled via Bluetooth and sensor data accessed from a web page. This allows continuous monitoring of crops from a remote location to increase yields. The robotic vehicle sprays water as needed based on sensor readings. The system aims to improve inefficient traditional agricultural methods using smart automation and remote monitoring via IoT.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
WEB-BASED IRRIGATION MONITORING AND CONTROL SYSTEMijcseit
In Uganda, as well as other developing countries, the increasing population stimulates the agricultural-related activities such as irrigation. Irrigation is basically done by humans and generally requires exhaustive physical efforts and involves exposure to errors during irrigation. Despite the advances in the irrigation and its wide spreading applications, irrigation remains majorly manual. Since irrigating is a difficult process especially when irrigating a big piece of land, it is necessary to simplify the process, thus web based system in irrigating was introduced and existing implementations have limitations such as irrigating at wrong hours, continued wastage of water, so prevent all this, a new system that uses a web control to remotely irrigate from a distance has been developed ,therefore main objective of this project is to design and develop a web based irrigation monitoring and control system since it is observed that this method is more reliable and efficient compared to the existing methods. The developed system is able to automatically receive the moisture levels from the field, responds to the different commands sent by the user to do the irrigation and the user is also able to switch on and off the pump.
Agro IR 4.0-smart and next generation agro-farming-Fab labs to make anythingAbulHasnatSolaiman
Agriculture 4.0 is a term for the next big trends facing the industry, including a greater focus on precision agriculture, the internet of things (IoT) and the use of big data to drive greater business efficiencies in the face of rising populations and climate change. Makerspaces or Fab labs around the world can contribute in big margin to make prototypes reducing cost and makerspaces will be actions towards IR 4.0 in Bangladesh
IoT for Smart Agriculture and Villages Vinay Solanki
Leverage IoT and M2M to make our villages and farming sector smarter and more efficient and productive. I talk about how we can use connected solutions to help rural population to become more efficient and productive
Wireless sensor network for monitoring irrigation using XBee Pro S2CjournalBEEI
Monitoring irrigation is still the problem of agriculture in Indonesia. During the dry season, the farming fields drought while in the rainy season, floods happened. Since the farm-fields located far from the urban area, it requires an automatic tool for monitoring the availability of water that can help the farmer to monitor the farm-field. Wireless sensor network is an appropriate technology used to overcome problems related to the monitoring system. This research is using a water level sensor, pump, Arduino Nano, and XBee Pro S2C in each monitoring node. The system designed within two modules, an automation irrigation module and a monitoring module, which is connected with the communication configuration of master-slaves between Xbee Pro S2C at each node. The system examined several scenarios in order to test the performance. Based on the testing result, all the performance parameters can be adequately delivered to the user and appropriated with the real condition in the farm field. The delay between nodes only takes 5-10 seconds.
Microcontroller based adaptive irrigation system using wsn for variety crops ...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Ways iot can transform your agriculture businessKG2
Out of several industries that adopted IOT for smart function and rapid development, agriculture remains a prominent sector to benefit from the technology.
Today, majority of the farmers are dependent on agriculture for their survival. But
majority of the agricultural tools and practices are outdated and it yields less crop
products, because everything is depends on environment and Government support. The
world population is becoming more comparatively cultivation land and crop yield. It is
essential for the world to increase the yielding of the crop by adopting information
technology and communication plays a vital role in smart farming. The objective of this
research paper to present tools and best practices for understanding the role of
information and communication technologies in agriculture sector, motivate and make
the illiterate farmers to understand the best insights given by the big data analytics using
machine learning
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
AN AMELIORATED METHODOLOGY FOR THE DESIGN AND IMPLEMENTATION OF SMART PLANT S...AM Publications,India
In India Agriculture is the main profession. Majority of the farmers are dependent on the traditional approach of farming where they have to stay in their lands either for supplying the water to the crops or to monitor the moisture level in the soil and also the growth of plants. There is a possibility of excess water at some part of the land and there is a deficiency of water on the other side. This is one of the major problems to the farmer where he has to continuously monitor the flow of water. In this paper, we are proposing an automated smart plant system which supply the required quantity of water to the land, measures the moisture content in the soil using moisture sensor, and also measures the temperature and humidity in that area using temperature and humidity sensor. The proposed system is developed using hardware devices such as Arduino uno, Sensors, Relay board, Ethernet shield etc. In this system we are using a mobile phone to control all the equipments and devices which are connected in the system and we also send signals to start and stop the device through the mobile phone only.
WEB-BASED IRRIGATION MONITORING AND CONTROL SYSTEMijcseit
In Uganda, as well as other developing countries, the increasing population stimulates the agricultural-related activities such as irrigation. Irrigation is basically done by humans and generally requires exhaustive physical efforts and involves exposure to errors during irrigation. Despite the advances in the irrigation and its wide spreading applications, irrigation remains majorly manual. Since irrigating is a difficult process especially when irrigating a big piece of land, it is necessary to simplify the process, thus web based system in irrigating was introduced and existing implementations have limitations such as irrigating at wrong hours, continued wastage of water, so prevent all this, a new system that uses a web control to remotely irrigate from a distance has been developed ,therefore main objective of this project is to design and develop a web based irrigation monitoring and control system since it is observed that this method is more reliable and efficient compared to the existing methods. The developed system is able to automatically receive the moisture levels from the field, responds to the different commands sent by the user to do the irrigation and the user is also able to switch on and off the pump.
Agro IR 4.0-smart and next generation agro-farming-Fab labs to make anythingAbulHasnatSolaiman
Agriculture 4.0 is a term for the next big trends facing the industry, including a greater focus on precision agriculture, the internet of things (IoT) and the use of big data to drive greater business efficiencies in the face of rising populations and climate change. Makerspaces or Fab labs around the world can contribute in big margin to make prototypes reducing cost and makerspaces will be actions towards IR 4.0 in Bangladesh
IoT for Smart Agriculture and Villages Vinay Solanki
Leverage IoT and M2M to make our villages and farming sector smarter and more efficient and productive. I talk about how we can use connected solutions to help rural population to become more efficient and productive
Wireless sensor network for monitoring irrigation using XBee Pro S2CjournalBEEI
Monitoring irrigation is still the problem of agriculture in Indonesia. During the dry season, the farming fields drought while in the rainy season, floods happened. Since the farm-fields located far from the urban area, it requires an automatic tool for monitoring the availability of water that can help the farmer to monitor the farm-field. Wireless sensor network is an appropriate technology used to overcome problems related to the monitoring system. This research is using a water level sensor, pump, Arduino Nano, and XBee Pro S2C in each monitoring node. The system designed within two modules, an automation irrigation module and a monitoring module, which is connected with the communication configuration of master-slaves between Xbee Pro S2C at each node. The system examined several scenarios in order to test the performance. Based on the testing result, all the performance parameters can be adequately delivered to the user and appropriated with the real condition in the farm field. The delay between nodes only takes 5-10 seconds.
Microcontroller based adaptive irrigation system using wsn for variety crops ...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Ways iot can transform your agriculture businessKG2
Out of several industries that adopted IOT for smart function and rapid development, agriculture remains a prominent sector to benefit from the technology.
Today, majority of the farmers are dependent on agriculture for their survival. But
majority of the agricultural tools and practices are outdated and it yields less crop
products, because everything is depends on environment and Government support. The
world population is becoming more comparatively cultivation land and crop yield. It is
essential for the world to increase the yielding of the crop by adopting information
technology and communication plays a vital role in smart farming. The objective of this
research paper to present tools and best practices for understanding the role of
information and communication technologies in agriculture sector, motivate and make
the illiterate farmers to understand the best insights given by the big data analytics using
machine learning
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
AN AMELIORATED METHODOLOGY FOR THE DESIGN AND IMPLEMENTATION OF SMART PLANT S...AM Publications,India
In India Agriculture is the main profession. Majority of the farmers are dependent on the traditional approach of farming where they have to stay in their lands either for supplying the water to the crops or to monitor the moisture level in the soil and also the growth of plants. There is a possibility of excess water at some part of the land and there is a deficiency of water on the other side. This is one of the major problems to the farmer where he has to continuously monitor the flow of water. In this paper, we are proposing an automated smart plant system which supply the required quantity of water to the land, measures the moisture content in the soil using moisture sensor, and also measures the temperature and humidity in that area using temperature and humidity sensor. The proposed system is developed using hardware devices such as Arduino uno, Sensors, Relay board, Ethernet shield etc. In this system we are using a mobile phone to control all the equipments and devices which are connected in the system and we also send signals to start and stop the device through the mobile phone only.
The Internet of Things (IoT) in agriculture revolutionizes traditional farming practices by integrating smart technologies. Through sensor networks, data analytics, and connectivity, IoT empowers farmers with real-time insights into crop conditions, soil health, and equipment performance. This transformative approach enhances efficiency, resource utilization, and sustainability in agricultural processes, marking a significant leap toward precision farming.
Here we tried to focus briefly on IoT in agriculture topic. Hope it will help you.
Precision Agriculture for Water Management Using IOTrahulmonikasharma
In the territory of agriculture, proper use of irrigation is important and it is well known that irrigation by drip approach is very cost effective and efficient.Role of agriculture in the development of agricultural country is very important. The freshly come up wireless sensor network (WSN) technology has growing rapidly into distinct multi-disciplinary fields. Agriculture and farming is one of the management which have freshly switch their consideration to WSN, curious this cost adequate technology to improve its production and boost agriculture yield definitive. The outlook of this paper is to design and develop an agricultural monitoring system using wireless sensor network and IOT to enlarge the productivity and quality of farming without penetrating it for all the time manually. Temperature, humidity and water levels are the most important circumstances for the productivity, growth, and quality of plants in agriculture. The temperature, humidity and water level sensors are set up to cluster the temperature and humidity values. One of the most stimulating fields having an exotic need of decision support systems is Precision Agriculture (PA). Through sensor networks, agriculture can be associated to the IoT, with the help of this approach which provides real-time information about the lands and crops that will help farmers make right decisions. The primary influence is implementation of WSN in Precision Agriculture (PA) with the help of IoT which will enhance the usage of water, fertilizers while expand the yield of the crops and also notifications are sent to farmers mobile periodically. The farmers can able to monitor the field conditions from anywhere.
Introduction
System components of automated irrigation system
Preparation of programming schedule
Various types of automation system
Benefits of automized irrigation
Limitations of automized irrigation system
A REAL – TIME IRRIGATION CONTROL SYSTEM FOR PRECISION AGRICULTURE USING WSN I...IJCSEA Journal
Agricultural sector is playing vital role in Indian economy, in which irrigation mechanism is of key concern. Our paper aims to find the exact field condition and to control the wastage of water in the field and to provide exact controlling of field by using the drip irrigation, atomizing the agricultural environment by using the components and building the necessary hardware. For the precisely monitoring and controlling of the agriculture filed, different types of sensors were used. To implement the proposed
system ARM LPC2148 Microcontroller is used. The irrigation mechanism is monitored and controlled more efficiently by the proposed system, which is a real time feedback control system. GSM technology is used to inform the end user about the exact field condition. Actually this method of irrigation system has been proposed primarily to save resources, yield of crops and farm profitability.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.