Io t #11 introduction and closing slides
•
0 likes•262 views
This document summarizes an IoT Midlands meetup on smart cities. It lists sponsors and speakers who discussed using IoT technologies like air quality sensors, transport infrastructure data, big data analysis and small IoT hubs to build smart cities. Information was also provided on upcoming opportunities to visit smart cities in Southeast Europe and Lithuania through sponsored study tours to foster collaboration and innovation.
Report
Share
Report
Share
Download to read offline
Recommended
Welcome
Welcome to Bristol is Open event held at Bristol University's Goldney Hall on 7 July 2015, Andrew Nix
The Third International Workshop on Sensors and Smart Cities SSC 2017
The Third International Workshop on Sensors and Smart Cities SSC 2017PhD. student @University of Catania,Italy
The Third International Workshop on Sensors and Smart Cities (SSC 2017) will be held May 29, 2017 in Hong Kong, China in conjunction with the Third IEEE International Conference on Smart Computing. The workshop aims to bring together developments related to sensors and smart cities, including computing and sensing infrastructures, communication technologies, data processing, and applications. Topics of interest include cost, adaptability, self-learning, deployment, maintenance, smart user experiences, and overcoming adoption barriers. Authors are invited to submit papers no longer than 6 pages by March 15, 2017 for peer review and possible inclusion in the proceedings.Have Open Standards Delivered ITS Architectures that Matter?
The document discusses the history and development of open standards for passenger information systems from early analog systems to modern digital implementations. It outlines key standards and architectures developed between the 1990s and 2011, noting both benefits like standardized processes but also limitations like outdated technologies and documentation issues. While initial standards lacked major implementations, the document concludes that more recent open standards like GTFS-Realtime have delivered architectures that matter for passenger information. It raises questions about incentives for the private sector to continue advancing technologies built on public investments.
Mikael Börjeson - Future internet for Smarter Cities and User-centric Open I...
The document discusses the concepts of smart cities and user-centric open innovation using living labs. It defines a smart city as one that uses information and communication technologies to efficiently address challenges related to development and resources through integrated solutions that satisfy citizen desires. Living labs are described as systems that facilitate efficient user involvement in co-creative need-finding and designing desirable products, services, and solutions to address development and resource issues. Examples provided include crowd desire prediction, smart traffic management, and smart energy management. The document concludes by noting opportunities for synergy between open user-centric innovation, smart cities, and experimental facilities.
Presentation computer
1) The document discusses the X-Internet, which was proposed in 2000 as an evolution of the traditional Internet and World Wide Web to address some of their limitations.
2) Key aspects of the X-Internet include it being an "Executable Internet" that moves application execution closer to end users for faster response times, and an "Extended Internet" that connects physical objects to the digital world through sensors and RFID tags.
3) Some advantages of the X-Internet discussed are reducing data transfers by distributing processing logic between servers and smart clients, and providing a more interactive and context-aware experience than the traditional web.
Responsible Use of IoT Data in Research
Sheets of a talk given by Dr. Jacky Bourgeois at the Playground Meeting of the Delft Design for Values (DDfV) Institute that took place at 13 December 2018.
Real World Internet, Smart Cities and Linked Data: Mirko Presser (Alexandrea ...
The document discusses challenges facing cities like urbanization, aging populations, and climate change, and how a "smart city" approach using real-time data from sensors could help address these issues in a more cost effective way. It describes the "real world internet" concept of connecting physical objects to the digital world using RFID and sensors. Key challenges of this approach are handling large and heterogeneous data streams while ensuring privacy, security, and interoperability. The document advocates using semantic web and linked data techniques to annotate and integrate real-world sensor data.
Rein ahas smart cities and big data
This document discusses opportunities for smart cities and utilizing big data analysis. It covers three main topics: 1) mobility in the century of spatial mobility and how ICT use positively correlates with mobility, 2) how ICT and big data from sources like Twitter can be used to better understand and govern cities, and 3) potential business models for big data and whether smart decisions can be made through centralized data analysis or local sensor networks. The overall message is that big data can act as a mirror to understand what is happening and help create successful networks within cities rather than hierarchical systems, and ICT may be a tool to develop functioning networks.
Recommended
Welcome
Welcome to Bristol is Open event held at Bristol University's Goldney Hall on 7 July 2015, Andrew Nix
The Third International Workshop on Sensors and Smart Cities SSC 2017
The Third International Workshop on Sensors and Smart Cities SSC 2017PhD. student @University of Catania,Italy
The Third International Workshop on Sensors and Smart Cities (SSC 2017) will be held May 29, 2017 in Hong Kong, China in conjunction with the Third IEEE International Conference on Smart Computing. The workshop aims to bring together developments related to sensors and smart cities, including computing and sensing infrastructures, communication technologies, data processing, and applications. Topics of interest include cost, adaptability, self-learning, deployment, maintenance, smart user experiences, and overcoming adoption barriers. Authors are invited to submit papers no longer than 6 pages by March 15, 2017 for peer review and possible inclusion in the proceedings.Have Open Standards Delivered ITS Architectures that Matter?
The document discusses the history and development of open standards for passenger information systems from early analog systems to modern digital implementations. It outlines key standards and architectures developed between the 1990s and 2011, noting both benefits like standardized processes but also limitations like outdated technologies and documentation issues. While initial standards lacked major implementations, the document concludes that more recent open standards like GTFS-Realtime have delivered architectures that matter for passenger information. It raises questions about incentives for the private sector to continue advancing technologies built on public investments.
Mikael Börjeson - Future internet for Smarter Cities and User-centric Open I...
The document discusses the concepts of smart cities and user-centric open innovation using living labs. It defines a smart city as one that uses information and communication technologies to efficiently address challenges related to development and resources through integrated solutions that satisfy citizen desires. Living labs are described as systems that facilitate efficient user involvement in co-creative need-finding and designing desirable products, services, and solutions to address development and resource issues. Examples provided include crowd desire prediction, smart traffic management, and smart energy management. The document concludes by noting opportunities for synergy between open user-centric innovation, smart cities, and experimental facilities.
Presentation computer
1) The document discusses the X-Internet, which was proposed in 2000 as an evolution of the traditional Internet and World Wide Web to address some of their limitations.
2) Key aspects of the X-Internet include it being an "Executable Internet" that moves application execution closer to end users for faster response times, and an "Extended Internet" that connects physical objects to the digital world through sensors and RFID tags.
3) Some advantages of the X-Internet discussed are reducing data transfers by distributing processing logic between servers and smart clients, and providing a more interactive and context-aware experience than the traditional web.
Responsible Use of IoT Data in Research
Sheets of a talk given by Dr. Jacky Bourgeois at the Playground Meeting of the Delft Design for Values (DDfV) Institute that took place at 13 December 2018.
Real World Internet, Smart Cities and Linked Data: Mirko Presser (Alexandrea ...
The document discusses challenges facing cities like urbanization, aging populations, and climate change, and how a "smart city" approach using real-time data from sensors could help address these issues in a more cost effective way. It describes the "real world internet" concept of connecting physical objects to the digital world using RFID and sensors. Key challenges of this approach are handling large and heterogeneous data streams while ensuring privacy, security, and interoperability. The document advocates using semantic web and linked data techniques to annotate and integrate real-world sensor data.
Rein ahas smart cities and big data
This document discusses opportunities for smart cities and utilizing big data analysis. It covers three main topics: 1) mobility in the century of spatial mobility and how ICT use positively correlates with mobility, 2) how ICT and big data from sources like Twitter can be used to better understand and govern cities, and 3) potential business models for big data and whether smart decisions can be made through centralized data analysis or local sensor networks. The overall message is that big data can act as a mirror to understand what is happening and help create successful networks within cities rather than hierarchical systems, and ICT may be a tool to develop functioning networks.
Euro Data Portal and Support Centre for Data Sharing
The document discusses the establishment of a Support Centre for Data Sharing (SCDS) to enable data sharing in the private and public sectors in Europe. The SCDS aims to provide guidance on legal and technical aspects of data sharing, research and showcase best practices, connect stakeholders from different sectors, and exchange experiences to establish a knowledge base on data sharing practices. The overall goal is to demystify and enable increased data sharing across Europe.
Smart Cities
The document discusses how smart cities can be created using digital technologies and citizen engagement. It outlines Manchester's strategy to become a smart city by focusing on digital inclusion, industries, and innovation. The strategy aims to provide leadership, investment, and exemplar projects while collaborating with other cities. It envisions how future internet technologies can transform living and working in areas like mobility, environments, learning, and public services. Citizen engagement and open data/innovation are seen as keys to co-designing services and solutions that make cities more sustainable, democratic, and attractive.
Fireball: Smart Cities and Future Internet Michael Nilsson
The document outlines the agenda for a workshop on Smart Cities and the Future Internet. Session 1 will discuss the European Commission's innovation policy and Smart Cities initiative. Session 2 will feature presentations from Manchester, Amsterdam, Lisbon, Helsinki, and Barcelona on challenges of becoming smarter cities. Session 3 will discuss technologies and the Future Internet's role in empowering city innovation. Session 4 will include breakout groups, and Session 5 will have a panel discussion on understanding, experiencing, and building smarter cities. Living Labs are seen as open innovation ecosystems that can help address cities' competitiveness, employment, and sustainability challenges through collaboration with the Future Internet community.
CityPulse: Large-scale data analysis for smart city applications
The document discusses the CityPulse project, which uses large-scale data analysis to help solve problems in smart cities. It addresses privacy issues and 101 smart city scenarios that could be explored. Key issues discussed include privacy and trust, security, reliability, control and monitoring, and social impacts of large-scale urban data analysis. The presenter provides contact information for the EU FP7 CityPulse project.
CityPulse: Large-scale data analysis for smart city applications
The document summarizes the EU FP7 CityPulse Project, which aims to develop a smart city framework and analytics tools for large-scale data analysis from Internet of Things (IoT) devices. The project has defined over 101 smart city scenarios and will prototype 10 of these. It is developing an integrated framework with software tools, backend support servers, and common data interfaces. The goal is to extract insights from physical, cyber, and social data streams in (near) real-time to address smart city problems and provide proof-of-concept demonstrations and applications. Key challenges include processing real-world IoT data streams, ensuring privacy and security, and designing an open and reliable smart city data analytics framework.
The Internet of Things: What's next?
The document discusses the Internet of Things (IoT) and some of the key challenges. It notes that IoT data is multi-modal, distributed, heterogeneous, noisy and incomplete. It raises issues around data management, actuation and feedback, service descriptions, real-time analysis, and privacy and security. The document outlines research challenges around transforming raw data to actionable information, machine learning for large datasets, making data accessible and discoverable, and energy efficient data collection and communication. It emphasizes that IoT data integration requires solutions across physical, cyber and social domains.
Connected Smart Cities 2019
This document discusses the development of urban data platforms and smart city initiatives. It outlines the key stakeholders in urban data platforms, including municipalities, companies, startups, app developers, and citizens. It also discusses the current status of urban data platforms, from exploring and planning to operational stages. Additionally, it identifies several facilitators and inhibitors to effective urban data platforms, such as lack of business cases, technical standards, and cultural/social issues. Finally, it discusses the scale-up potential and market opportunities for further developing and expanding urban data platforms across city clusters nationally and internationally.
Dynamic Semantics for Semantics for Dynamic IoT Environments
This document discusses the need for dynamic semantics to handle the complex and changing nature of data in IoT environments. It notes that while semantic models and ontologies exist and are helpful for interoperability, they need to be designed simply and account for the dynamic nature of IoT data. Semantic annotations may change over time and location, and tools are needed to update them automatically. Overall, semantics are an important part of solving interoperability but must be implemented carefully considering the constraints of IoT environments.
Mobilis 2008 - TR1 : Urban Mobility: Municipal Wireless Networks as an Enabli...
Support utilisé lors de la table ronde 1 : "Les offres innovantes de mobilité urbaine" lors des rencontres Mobilis 2008 (Belfort 18&19 nov 08). Intervenant : Antonio Capone (Politecnico di Milano)
Large-scale data analytics for smart cities
This document discusses large-scale data analytics for smart cities. It notes that smart city data is multi-modal, heterogeneous, noisy, incomplete, time and location dependent, and dynamic. Effective smart city data analytics requires approaches that can handle these complexities as well as address issues like privacy, security, scalability and flexibility. The document outlines some of the key challenges in smart city data collection, processing, analysis and visualization. It also summarizes recent research on topics like data discovery, abstraction, ontology learning and social media analysis for smart cities.
Data Analytics for Smart Cities: Looking Back, Looking Forward
This document discusses data analytics for smart cities. It describes how large volumes of data from sources like traffic, weather, and social media can be analyzed to provide insights and improve city management. However, ensuring privacy, security, and that citizens remain in control of their data is challenging. Open data standards and complementary datasets are also needed to fully understand events. Overall, data analytics enables new smart city applications but also raises issues that must be addressed regarding data quality, context, and governance.
Gsc mstf m_koster_atlanta_may_7_2013_rev1.1
Michael Koster presented on open standards for the Internet of Things at the GSC MSTF Conference at Georgia Tech Research Institute. He discussed the value of connecting physical objects through the IoT and the need for an open horizontal platform to enable interoperability. Koster proposed that stakeholders work together to build IoT standards using an open source process, addressing real problems through use cases and developing common data models, information models, and APIs. He introduced the Open Source Internet of Things organization which aims to collaboratively develop such an open horizontal platform for the IoT.
Information Engineering in the Age of the Internet of Things
The document discusses information engineering challenges in the age of the Internet of Things (IoT). It notes that while semantic models and ontologies are useful, simplicity is important for real-world implementation. Dynamic and streaming IoT data also requires approaches different from traditional semantic web techniques. The document provides several "design commandments" focused on usability, interoperability, and accounting for the constraints of IoT environments. Overall, it argues that semantics are just one part of effectively handling and processing IoT data.
Manchester Smart City 2012 Event 3
The document summarizes Manchester's digital agenda and development as a smart city region. Key points include establishing the Manchester Digital Development Agency in 2004 to coordinate the digital agenda. Manchester aims to be a smart, inclusive and sustainable city through initiatives like open data, open innovation, smart mobility and green technologies. It also discusses Manchester's history of industrialization and regeneration efforts to transition to a knowledge-based economy through initiatives like the Manchester Living Lab and growing the digital/creative sector.
Rin armenia icin 2020
This document summarizes the goals and activities of the Center of Expertise in RINA in Armenia. The center was established in 2018 to be the first to systematically deploy the Recursive Internetwork Architecture (RINA) worldwide through research, development, testing and training. Key activities included collaborating with academic institutions to develop RINA courses, testing RINA applications in sectors like telecommunications and IoT, raising awareness of RINA through conferences, and establishing research labs. The center outlined plans for 2020 to further develop use cases, expand private sector collaboration and academic engagement, and address bottlenecks like the lack of a complete RINA product and numbers to demonstrate its benefits to non-telecom audiences.
Dynamic Data Analytics for the Internet of Things: Challenges and Opportunities
Dynamic Data Analytics for the Internet of Things: Challenges and Opportunities
IoT data analytics faces unique challenges compared to traditional big data analytics. IoT data is multi-modal, heterogeneous, noisy, incomplete, time and location dependent, and dynamic. It requires near real-time analysis while ensuring privacy and security. Analyzing IoT data requires an ecosystem approach that can integrate data from multiple sources and platforms semantically. Discovery engines are needed to locate IoT data streams and resources that are often mobile and transient. Context-aware and opportunistic techniques are required to access and route IoT data. The goal is to extract insights and actionable knowledge from physical, cyber, and social data sources.
Working Group Smart Cities – FIREBALL Summary March 2012
The document discusses the FIREBALL project which aims to create a connected smart cities network in Europe through collaboration between different research communities related to future internet and smart cities. It seeks to identify common assets, create innovation showcases, and develop a roadmap to support future internet-enabled services in smart cities. The network includes cities like Helsinki, Manchester, Amsterdam, and Barcelona that are working to enhance city life through digital technologies and collective intelligence. The project expects to establish a shared vision and sustainable smart cities network through various stakeholder engagements and funding opportunities.
Working Group Smart Cities – ICT PSP Smart Cities Portfolio March 2012
1) The Smart Cities Portfolio Working Group, chaired by the Manchester Digital Development Agency, coordinates several European projects related to smart cities and future internet technologies.
2) These projects include CITADEL, CitySDK, Commons 4 Europe, iCity, and i-SCOPE which develop technologies like high-speed mobile apps, open source smart city app ecosystems, collaborative web applications, linked open data ecosystems, and interoperable smart city service platforms.
3) The working group aims to promote smart cities, plan collaborative work with groups like Eurocities, develop project results and links with decision makers, and participate in global networking events through 2013.
Working Group Smart Cities – Bologna case study
The document summarizes recent smart cities projects in Bologna, Italy. It discusses the SMARtiP project which aims to enhance citizen-centric internet services across five European cities, including Bologna. For Bologna, SMARtiP focuses on smart engagement, environments, and mobility projects. It also mentions the iCity project framework and plans for the future Citizen's Electronic Record. Finally, it announces an upcoming Smart Cities Exhibition in Bologna from November 27-29, 2012.
Towards Wireless Collaboration
This presentation was given to a meeting of IT Heads and Network Managers at a UCISA London gathering (Jan 2019). It covered City's experiences of investigating a wireless collaboration solution for its learning spaces.
Jabed technologies rev12_jf
The document provides details on the JABED Technologies Smart Home Irrigation System project including:
1) An introduction to JABED Technologies, the project team members and organizational structure, stakeholders, and the need for a smart irrigation system.
2) A description of the proposed smart irrigation system including an overview of its functions to store and reuse rainwater, schedule watering automatically, determine water sources, and utilize environmental conditions to adjust watering schedules.
3) Project financial details such as the initial $10,000 investment and estimated $1,000 profit per unit once developed and sold at an estimated retail price of $2,500.
Green and Smart Homes to Save theplanet : Prof K P Mohandas
A presentation on Green Homes and Smart Homes.. What are Green Homes and Why they are required. What are Smart Homes and what it can do to save the planet
More Related Content
What's hot
Euro Data Portal and Support Centre for Data Sharing
The document discusses the establishment of a Support Centre for Data Sharing (SCDS) to enable data sharing in the private and public sectors in Europe. The SCDS aims to provide guidance on legal and technical aspects of data sharing, research and showcase best practices, connect stakeholders from different sectors, and exchange experiences to establish a knowledge base on data sharing practices. The overall goal is to demystify and enable increased data sharing across Europe.
Smart Cities
The document discusses how smart cities can be created using digital technologies and citizen engagement. It outlines Manchester's strategy to become a smart city by focusing on digital inclusion, industries, and innovation. The strategy aims to provide leadership, investment, and exemplar projects while collaborating with other cities. It envisions how future internet technologies can transform living and working in areas like mobility, environments, learning, and public services. Citizen engagement and open data/innovation are seen as keys to co-designing services and solutions that make cities more sustainable, democratic, and attractive.
Fireball: Smart Cities and Future Internet Michael Nilsson
The document outlines the agenda for a workshop on Smart Cities and the Future Internet. Session 1 will discuss the European Commission's innovation policy and Smart Cities initiative. Session 2 will feature presentations from Manchester, Amsterdam, Lisbon, Helsinki, and Barcelona on challenges of becoming smarter cities. Session 3 will discuss technologies and the Future Internet's role in empowering city innovation. Session 4 will include breakout groups, and Session 5 will have a panel discussion on understanding, experiencing, and building smarter cities. Living Labs are seen as open innovation ecosystems that can help address cities' competitiveness, employment, and sustainability challenges through collaboration with the Future Internet community.
CityPulse: Large-scale data analysis for smart city applications
The document discusses the CityPulse project, which uses large-scale data analysis to help solve problems in smart cities. It addresses privacy issues and 101 smart city scenarios that could be explored. Key issues discussed include privacy and trust, security, reliability, control and monitoring, and social impacts of large-scale urban data analysis. The presenter provides contact information for the EU FP7 CityPulse project.
CityPulse: Large-scale data analysis for smart city applications
The document summarizes the EU FP7 CityPulse Project, which aims to develop a smart city framework and analytics tools for large-scale data analysis from Internet of Things (IoT) devices. The project has defined over 101 smart city scenarios and will prototype 10 of these. It is developing an integrated framework with software tools, backend support servers, and common data interfaces. The goal is to extract insights from physical, cyber, and social data streams in (near) real-time to address smart city problems and provide proof-of-concept demonstrations and applications. Key challenges include processing real-world IoT data streams, ensuring privacy and security, and designing an open and reliable smart city data analytics framework.
The Internet of Things: What's next?
The document discusses the Internet of Things (IoT) and some of the key challenges. It notes that IoT data is multi-modal, distributed, heterogeneous, noisy and incomplete. It raises issues around data management, actuation and feedback, service descriptions, real-time analysis, and privacy and security. The document outlines research challenges around transforming raw data to actionable information, machine learning for large datasets, making data accessible and discoverable, and energy efficient data collection and communication. It emphasizes that IoT data integration requires solutions across physical, cyber and social domains.
Connected Smart Cities 2019
This document discusses the development of urban data platforms and smart city initiatives. It outlines the key stakeholders in urban data platforms, including municipalities, companies, startups, app developers, and citizens. It also discusses the current status of urban data platforms, from exploring and planning to operational stages. Additionally, it identifies several facilitators and inhibitors to effective urban data platforms, such as lack of business cases, technical standards, and cultural/social issues. Finally, it discusses the scale-up potential and market opportunities for further developing and expanding urban data platforms across city clusters nationally and internationally.
Dynamic Semantics for Semantics for Dynamic IoT Environments
This document discusses the need for dynamic semantics to handle the complex and changing nature of data in IoT environments. It notes that while semantic models and ontologies exist and are helpful for interoperability, they need to be designed simply and account for the dynamic nature of IoT data. Semantic annotations may change over time and location, and tools are needed to update them automatically. Overall, semantics are an important part of solving interoperability but must be implemented carefully considering the constraints of IoT environments.
Mobilis 2008 - TR1 : Urban Mobility: Municipal Wireless Networks as an Enabli...
Support utilisé lors de la table ronde 1 : "Les offres innovantes de mobilité urbaine" lors des rencontres Mobilis 2008 (Belfort 18&19 nov 08). Intervenant : Antonio Capone (Politecnico di Milano)
Large-scale data analytics for smart cities
This document discusses large-scale data analytics for smart cities. It notes that smart city data is multi-modal, heterogeneous, noisy, incomplete, time and location dependent, and dynamic. Effective smart city data analytics requires approaches that can handle these complexities as well as address issues like privacy, security, scalability and flexibility. The document outlines some of the key challenges in smart city data collection, processing, analysis and visualization. It also summarizes recent research on topics like data discovery, abstraction, ontology learning and social media analysis for smart cities.
Data Analytics for Smart Cities: Looking Back, Looking Forward
This document discusses data analytics for smart cities. It describes how large volumes of data from sources like traffic, weather, and social media can be analyzed to provide insights and improve city management. However, ensuring privacy, security, and that citizens remain in control of their data is challenging. Open data standards and complementary datasets are also needed to fully understand events. Overall, data analytics enables new smart city applications but also raises issues that must be addressed regarding data quality, context, and governance.
Gsc mstf m_koster_atlanta_may_7_2013_rev1.1
Michael Koster presented on open standards for the Internet of Things at the GSC MSTF Conference at Georgia Tech Research Institute. He discussed the value of connecting physical objects through the IoT and the need for an open horizontal platform to enable interoperability. Koster proposed that stakeholders work together to build IoT standards using an open source process, addressing real problems through use cases and developing common data models, information models, and APIs. He introduced the Open Source Internet of Things organization which aims to collaboratively develop such an open horizontal platform for the IoT.
Information Engineering in the Age of the Internet of Things
The document discusses information engineering challenges in the age of the Internet of Things (IoT). It notes that while semantic models and ontologies are useful, simplicity is important for real-world implementation. Dynamic and streaming IoT data also requires approaches different from traditional semantic web techniques. The document provides several "design commandments" focused on usability, interoperability, and accounting for the constraints of IoT environments. Overall, it argues that semantics are just one part of effectively handling and processing IoT data.
Manchester Smart City 2012 Event 3
The document summarizes Manchester's digital agenda and development as a smart city region. Key points include establishing the Manchester Digital Development Agency in 2004 to coordinate the digital agenda. Manchester aims to be a smart, inclusive and sustainable city through initiatives like open data, open innovation, smart mobility and green technologies. It also discusses Manchester's history of industrialization and regeneration efforts to transition to a knowledge-based economy through initiatives like the Manchester Living Lab and growing the digital/creative sector.
Rin armenia icin 2020
This document summarizes the goals and activities of the Center of Expertise in RINA in Armenia. The center was established in 2018 to be the first to systematically deploy the Recursive Internetwork Architecture (RINA) worldwide through research, development, testing and training. Key activities included collaborating with academic institutions to develop RINA courses, testing RINA applications in sectors like telecommunications and IoT, raising awareness of RINA through conferences, and establishing research labs. The center outlined plans for 2020 to further develop use cases, expand private sector collaboration and academic engagement, and address bottlenecks like the lack of a complete RINA product and numbers to demonstrate its benefits to non-telecom audiences.
Dynamic Data Analytics for the Internet of Things: Challenges and Opportunities
Dynamic Data Analytics for the Internet of Things: Challenges and Opportunities
IoT data analytics faces unique challenges compared to traditional big data analytics. IoT data is multi-modal, heterogeneous, noisy, incomplete, time and location dependent, and dynamic. It requires near real-time analysis while ensuring privacy and security. Analyzing IoT data requires an ecosystem approach that can integrate data from multiple sources and platforms semantically. Discovery engines are needed to locate IoT data streams and resources that are often mobile and transient. Context-aware and opportunistic techniques are required to access and route IoT data. The goal is to extract insights and actionable knowledge from physical, cyber, and social data sources.
Working Group Smart Cities – FIREBALL Summary March 2012
The document discusses the FIREBALL project which aims to create a connected smart cities network in Europe through collaboration between different research communities related to future internet and smart cities. It seeks to identify common assets, create innovation showcases, and develop a roadmap to support future internet-enabled services in smart cities. The network includes cities like Helsinki, Manchester, Amsterdam, and Barcelona that are working to enhance city life through digital technologies and collective intelligence. The project expects to establish a shared vision and sustainable smart cities network through various stakeholder engagements and funding opportunities.
Working Group Smart Cities – ICT PSP Smart Cities Portfolio March 2012
1) The Smart Cities Portfolio Working Group, chaired by the Manchester Digital Development Agency, coordinates several European projects related to smart cities and future internet technologies.
2) These projects include CITADEL, CitySDK, Commons 4 Europe, iCity, and i-SCOPE which develop technologies like high-speed mobile apps, open source smart city app ecosystems, collaborative web applications, linked open data ecosystems, and interoperable smart city service platforms.
3) The working group aims to promote smart cities, plan collaborative work with groups like Eurocities, develop project results and links with decision makers, and participate in global networking events through 2013.
Working Group Smart Cities – Bologna case study
The document summarizes recent smart cities projects in Bologna, Italy. It discusses the SMARtiP project which aims to enhance citizen-centric internet services across five European cities, including Bologna. For Bologna, SMARtiP focuses on smart engagement, environments, and mobility projects. It also mentions the iCity project framework and plans for the future Citizen's Electronic Record. Finally, it announces an upcoming Smart Cities Exhibition in Bologna from November 27-29, 2012.
Towards Wireless Collaboration
This presentation was given to a meeting of IT Heads and Network Managers at a UCISA London gathering (Jan 2019). It covered City's experiences of investigating a wireless collaboration solution for its learning spaces.
What's hot (20)
Euro Data Portal and Support Centre for Data Sharing
Euro Data Portal and Support Centre for Data Sharing
Fireball: Smart Cities and Future Internet Michael Nilsson
Fireball: Smart Cities and Future Internet Michael Nilsson
CityPulse: Large-scale data analysis for smart city applications
CityPulse: Large-scale data analysis for smart city applications
CityPulse: Large-scale data analysis for smart city applications
CityPulse: Large-scale data analysis for smart city applications
Dynamic Semantics for Semantics for Dynamic IoT Environments
Dynamic Semantics for Semantics for Dynamic IoT Environments
Mobilis 2008 - TR1 : Urban Mobility: Municipal Wireless Networks as an Enabli...
Mobilis 2008 - TR1 : Urban Mobility: Municipal Wireless Networks as an Enabli...
Data Analytics for Smart Cities: Looking Back, Looking Forward
Data Analytics for Smart Cities: Looking Back, Looking Forward
Information Engineering in the Age of the Internet of Things
Information Engineering in the Age of the Internet of Things
Dynamic Data Analytics for the Internet of Things: Challenges and Opportunities
Dynamic Data Analytics for the Internet of Things: Challenges and Opportunities
Working Group Smart Cities – FIREBALL Summary March 2012
Working Group Smart Cities – FIREBALL Summary March 2012
Working Group Smart Cities – ICT PSP Smart Cities Portfolio March 2012
Working Group Smart Cities – ICT PSP Smart Cities Portfolio March 2012
Viewers also liked
Jabed technologies rev12_jf
The document provides details on the JABED Technologies Smart Home Irrigation System project including:
1) An introduction to JABED Technologies, the project team members and organizational structure, stakeholders, and the need for a smart irrigation system.
2) A description of the proposed smart irrigation system including an overview of its functions to store and reuse rainwater, schedule watering automatically, determine water sources, and utilize environmental conditions to adjust watering schedules.
3) Project financial details such as the initial $10,000 investment and estimated $1,000 profit per unit once developed and sold at an estimated retail price of $2,500.
Green and Smart Homes to Save theplanet : Prof K P Mohandas
A presentation on Green Homes and Smart Homes.. What are Green Homes and Why they are required. What are Smart Homes and what it can do to save the planet
Smart Irrigation: Smartphone Technology for Managing Urban and Agricultural I...
Smart Irrigation: Smartphone Technology for Managing Urban and Agricultural I...National Institute of Food and Agriculture
This document summarizes a project to develop smartphone apps for irrigation scheduling of various crops. The project involves researchers from multiple universities who are developing evapotranspiration-based scheduling tools for crops like citrus, cotton, strawberries, and turfgrass. The apps use local weather and soil data, crop coefficients, and information about irrigation systems to provide customized irrigation schedules with minimal user input. Over 400 users have adopted the turfgrass app, and adoption is growing for the other crop apps as well. Field tests show the apps can increase yields while reducing water use compared to traditional scheduling methods.Water level sensors
This document discusses various types of water level sensors used to monitor canal water levels, including contact sensors like pressure sensors, staff gauges, and Doppler sensors, and non-contact sensors like ultrasonic transmitters and radar sensors. It compares the accuracy, cost, and limitations of different sensor brands. Field observations at sample canal locations identified suitable installation points and challenges. The document recommends radar sensors for major canals and ultrasonic sensors or digital sensors for other canals, depending on conditions. It acknowledges contributions from organizations that supported the study.
Water level sensors repot
An ultrasonic level sensor uses high frequency sound waves to measure the distance from the sensor to the surface of the liquid being measured. It works by transmitting sound pulses and measuring the time it takes for the echoes to return. The sensor contains piezoelectric crystals that generate and detect sound waves. It can provide continuous level monitoring or point level control and has advantages of being non-contact, requiring no calibration, and working with viscous or solid materials. However, its accuracy can be affected by temperature, turbulence, foam and other process factors.
Smart farming using ARDUINO (Nirma University)
this is to giude those who wants to learnf about automation in the field of agriculture and green harvesting.
Smart Irrigation ppt
This document describes a smart irrigation system that uses sensors to measure soil moisture, temperature, humidity and water levels. The system has a transmitter section with sensors that sends the sensor readings via Zigbee modules to a receiver section. The receiver section has a microcontroller that receives the data and sends messages to farmers via GSM if irrigation is needed. The system automatically provides water to crops based on sensor readings to save water and reduce human intervention in agriculture.
Smart irrigation system using Internet Of Things
This document describes a smart irrigation system project conducted by four students at SDM College of Engineering and Technology in Dharwad, India. The project aims to develop a smart irrigation system using Internet of Things technology. It was conducted during the 2015-2016 academic year under the guidance of a professor in the Electronics and Communication Engineering department. The report documents the system developed and results obtained from the project.
Green-house-environment-control
This document is a project report submitted by four students for their Bachelor of Engineering degree. It outlines a proposed system to automatically monitor and control the environment of a greenhouse. The system would use sensors to measure parameters like temperature, humidity, light, and soil moisture. A microcontroller would read the sensor measurements and control actuators like pumps, sprayers, coolers, and lights to maintain optimal conditions for plant growth. The proposed system aims to reduce human intervention and provide a low-cost and effective automation solution for Indian farmers compared to existing manual or partially automated greenhouse systems.
Smart irrigation ppt
This document describes a smart irrigation system using a GSM network. It consists of a soil moisture sensor connected to a microcontroller that controls a water pump. The microcontroller is connected to a GSM module to send SMS alerts. If the sensor detects soil moisture is below a threshold, it triggers the pump and notifies the user by SMS. When moisture reaches the threshold, the pump stops and another SMS is sent. The system aims to remotely monitor soil moisture in real-time and automate watering to conserve water and reduce labor.
Wireless greenhouse environment monitoring through sensors
This document describes a wireless greenhouse environment monitoring system using sensors. The system monitors temperature, humidity, soil moisture, and light intensity using various sensors and sends the data to a microcontroller. The microcontroller then controls actuators like water pumps, sprayers, and lights depending on the sensor readings and predefined thresholds. It uses sensors, a microcontroller, LCD display, and RF transmission to monitor and control devices in the greenhouse remotely.
Embedded green house automation system
This document describes an automated greenhouse system using an 8051 microcontroller. The system monitors environmental conditions like temperature, light, and humidity using sensors and controls factors like watering and lighting using relays to maintain optimal growing conditions for plants. The microcontroller runs a software program to automate monitoring of sensors and control of relays. The system aims to save water, increase efficiency, and reduce environmental impacts on plant production while allowing remote monitoring and control of the greenhouse over the internet.
Sensors for water level, soil moisture temp & r.humidity
Arduino and sensors for water level, soil moisture, temperature & relative humidity for application in the ClimaAdapt Project areas - Nagarjuna Sagar Project Left and Right Canals in the States of Telangana and Andhra Pradesh for water use efficiency - Canal and On Farm
Green house weather control system
The document describes a weather monitoring and control system for a greenhouse. Sensors measure parameters like temperature, humidity, light, and soil moisture. A microcontroller processes the sensor data and controls actuators like pumps, sprayers, and lights. The system aims to automatically control the greenhouse climate based on predefined thresholds to optimize plant growth and production.
Connected Agricultural services and internet of things..
This document discusses connected agriculture and the Internet of Things. It begins with an overview of global challenges in food production such as the need to increase food output 50% by 2025 to feed a growing population. It then discusses opportunities for connected solutions in agriculture to address issues like increasing productivity while using fewer resources. The document proposes a connected agriculture solution that would provide farmers technology and expert advice to better manage irrigation, seeds, pesticides, and make decisions. It outlines a functional architecture and implementation challenges for the solution.
Flywheel Energy Storage Systeems
This FES unit describe the working and application of Flywheel energy storage systems. For more details contact sengar.avinash@outlook.com
75600403 automatic-plant-irrigation-system
The document describes an automatic plant irrigation system project undertaken by four students. It includes a cover page listing the students and their department. It then outlines the system which uses sensors to detect soil moisture levels and a microcontroller to control water pumps for different fields. The system prioritizes fields based on the order their sensors detect low moisture levels to efficiently irrigate plants.
Automatic Irrigation System
This ppt is explained how to develop an automatic irrigation system that switches a pump motor on/off upon sensing moisture content of the soil.By using this method is to reduce human intervention and still ensure proper irrigation.
Edgefxkits.com has a wide range of electronic projects ideas that are primarily helpful for ECE, EEE and EIE students and the ideas can be applied for real life purposes as well.
http://www.edgefxkits.com/
Visit our page to get more ideas on popular electronic projects developed by professionals.
Edgefx provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
Greenhouse technology
Greenhouses provide a controlled environment for crop growth. They allow sunlight to enter while protecting crops from outside environmental factors like cold, heat, and rain. This controlled environment allows for higher crop yields year-round. Greenhouse technologies regulate temperature, humidity, carbon dioxide levels, and protect from pests and diseases. Components include the structural framework, covering materials, and environmental control systems.
Automatic irrigation system ppt
This document describes a microcontroller-based automatic irrigation system. It consists of a soil moisture sensor to detect moisture levels, a comparator circuit to analyze the sensor readings, an ATmega328 microcontroller to control the system, and a solenoid valve and relay circuit to regulate water flow. The system automatically monitors soil moisture and operates the valve to optimize irrigation based on moisture thresholds, reducing water use and labor compared to manual systems.
Viewers also liked (20)
Green and Smart Homes to Save theplanet : Prof K P Mohandas
Green and Smart Homes to Save theplanet : Prof K P Mohandas
Smart Irrigation: Smartphone Technology for Managing Urban and Agricultural I...
Smart Irrigation: Smartphone Technology for Managing Urban and Agricultural I...
Wireless greenhouse environment monitoring through sensors
Wireless greenhouse environment monitoring through sensors
Sensors for water level, soil moisture temp & r.humidity
Sensors for water level, soil moisture temp & r.humidity
Connected Agricultural services and internet of things..
Connected Agricultural services and internet of things..
Similar to Io t #11 introduction and closing slides
Open Smart Cities in Canada - Webinar 1 - English
Slides presented for Open Smart Cities in Canada's first webinar.
Listen to the webinar at: https://bit.ly/2HH7x29
Learn more about the project at:
http://www.opennorth.ca/projects#1
Webinar 1: Situating Canadian Cities in an International Smart City Ecosystem
Webinar 1: Situating Canadian Cities in an International Smart City EcosystemCommunication and Media Studies, Carleton University
Presented by: Jean-Noe Landry (Open North) & Dr Tracey P. Lauriault (Carleton University) & Rachel Bloom (Open North)
Content Contributors: David Fewer CIPPIC, Mark Fox U. of Toronto, Stephen Letts (RA Carleton U.)
Partner Cities: City of Edmonton, City of Guelph, Ville de Montréal & City of Ottawa
Project Name: Open Smart Cities in Canada
Date: August 30, 2017
Michael Nilsson - Towards Future Internet: What can it mean for Living Labs a...
Michael Nilsson - Towards Future Internet: What can it mean for Living Labs a...ENoLL Conference 2010
This document summarizes discussions from the Future Internet Assembly conference in Ghent, Belgium in 2010. It discusses how future internet research and experimentation can be adopted in living labs and smart cities to enable open innovation. Speakers discussed using new technologies in cities to develop public services through living lab methodologies. This allows for user co-creation and identification of successful concepts to create sustainable services. Questions focused on how to prepare new technologies for living lab testing, manage interdisciplinary teams, and involve users. The role of future internet experimentation in innovation environments in cities and opportunities for companies were also discussed.Alex Gluhak & Michael Nilsson - Smart Cities
Alex Gluhak & Michael Nilsson
Part I: Experimentation and Innovation Facilities for Smart Cities – Opportunities and Needs,
Part II: Collaboration Requirements and Opportunities in the Future Internet, Living Labs and Smart City Communities
Ec, Olavi Luotonen, Barcelona, 26 March 2010
Intervención Olavi Luotonen. Comisión europea. Scientific Officer, New Infrastucture Paradigms and Experimental Facilities en las Primeras Jornadas de Centros de Conocimiento. Citilab Cornellà #citilab #joceco
06 Smart Cities Michael Nilsson
The document summarizes the FIREBALL project which brings together different players to exploit the linkages between smart cities, living labs, and the future internet for connected smart city innovation. It discusses key concepts like smart cities and living labs, outlines FIREBALL's goals of creating synergies among research communities and identifying common assets. It also maps the innovation landscape involving topics like internet technologies, smart city applications, and describes expected results like a connected European smart cities network and a roadmap for exploring future internet innovation opportunities in smart cities.
Virtualisation taking place – Martin Brynskov
How understanding virtualisation, the computing continuum and communities of practice is essential for making the right investments in research, innovation and deployment. A global perspective from Europe. By Martin Brynskov https://www.linkedin.com/in/brynskov/
2019 04-08 oasc-martin_brynskov
Martin Brynskov is the chair of Open & Agile Smart Cities (OASC) and coordinator of SynchroniCity and NGIoT initiatives. The summary is:
OASC's mission is to create a global smart city market based on city needs through a global network of 130 cities in 28 countries. SynchroniCity provides a common technical ground including OASC standards, reference implementations, and cloud hosting to enable innovation and procurement of IoT services across domains. The SynchroniCity architecture defines interoperability points for key APIs to integrate city data and applications.
Self-Improving Sustainable Intelligent Transport System (ITS) Using Video Con...
Objective: to develop VCA algorithms that are suitable for big data processing, and designing visual, audio and environmental sensors/actuators ready to support sustainable transport
Expected results
Short-term: increasing and expanding technical excellence by creating a set of innovative solutions integrating various sensors and actuators designed & developed for enabling ITS
Long-term: significant impact on the urban environment in areas of transit efficiency, pollution & safety
Gerald Santucci Birmingham Beyond 2010
The document discusses the rise of smart cities and the Internet of Things. It provides examples of smart city initiatives in Portland, Guangzhou, and Amsterdam that focus on areas like transportation, sustainability, energy efficiency, and green technology. The document also outlines some technical and computing challenges of large-scale IoT systems as well as examples of how IoT can improve areas like smart buildings, energy, lighting, and water systems. EU research programs have funded work related to future internet technologies, applications, and smart cities.
Smart city case studies in the USA
The document provides an overview and analysis of leading smart city projects in the United States. It identifies Portland and Seattle as initial cities for a field trip by a Finnish delegation due to their high scores across metrics relevant to smart city development. Relevant smart city cases from Oregon and Washington are highlighted, including systems modeling in Portland, sustainability tools in Tacoma, and the Living Building Challenge framework. The document proposes broadening the field trip to include Anchorage, representing the Cascadia region of North America as a logical place to start Finnish-American smart city networking.
Future Internet: Challenge And Research Trend
1) The document discusses the challenges of the current Internet and outlines the concept of Future Internet research, which aims to address these challenges through new network architectures, technologies, and services.
2) It describes major Future Internet research programs and testbeds in countries like the US, Europe, Japan, China, and South Korea. These programs focus on areas like virtualization, resource sharing, mobility, and federation of experimental facilities.
3) The trends of Future Internet research include a focus on networking ubiquitous devices and interconnecting people, things, and content through both evolutionary and revolutionary approaches.
Internet of Things for Smart City
This document discusses using the Internet of Things (IoT) to create smart cities. It begins by defining IoT and describing how connecting various components through sensors, microcontrollers and the internet can improve quality of life. The document then discusses the architecture of an urban IoT network, including different components like sensors, gateways and the web. It describes various services an IoT-enabled smart city could provide, such as traffic management, garbage collection, air quality monitoring and energy usage optimization. Finally, the document presents a conceptual model of an urban IoT network and discusses protocols like HTTP, CoAP and 6LoWPAN that could be used to connect constrained devices in a smart city IoT system.
Keynote: Making Smarter Tuscany and Florence with Km4City
Keynote at International Summit on Smart World and Smart Cities, In Conjunction With 2017 IEEE Smart World Congress
August 5, 2017, San Francisco, USA
http://smart-city-conference.com/summit2017/
Sentient Urban Platform for Smart City
Set up an ICT based Urban Platform integrated and unified data management among services, city operators and city users:
Control Room, Real Time Monitoring
decision support, assessing and monitoring risk and resilience
Data analytics and business intelligence
predictions, reasoning, city users behavior analysis, ….
Reading the city: big data, users behavior and needs, ...
IOT, Open data sensors, private data, static and real time data.
City Strategies: stimulate virtuous behavior of City Users
participation, totem, twitter, Apps, etc.
Transform Data into value
Put in action smart city innovative solutions and services, development tools
What is enabling and providing smart services
Smart Parking, in Tuscany
Smart First Aid in Tuscany
Smart Fuel pricing in Tuscany
Smart search for POI and public transport srv.
Public Transportation in Tuscany
Routing and multimodal in Tuscany
Social Media Monitoring and acting
Traffic events and Resilience in Florence
Bike Sharing in Pisa and Siena
Recharge stations for e-vehicles
Entertainment Events in Florence
Traffic Sensors in Tuscany
Weather forecast/condition in Tuscany
Pollution and Pollination in Tuscany
People Monitoring Assessment in the City, in Florence via WiFi
People Monitoring, in Tuscany via App
All Point of Interests, cultural activities, IOT, …
Over than 1.2 Million of complex events per day!
Towards a "People-first" Smart City
This document discusses creating people-first smart cities. It argues that cities should be designed for people and that citizens, government, and technology must be better connected. It provides examples of cities that empower citizens through open data, crowdsourcing solutions, and training public servants in data science. The document advocates avoiding one-size-fits-all technical solutions, making data open and shareable, and developing solutions through public-private partnerships that engage stakeholders. The overarching message is that people must be at the core of any smart city plan.
Smart Cities (19.2)
Third seminary realized at PET-MA group, and the first one in english version (instead of portuguese). Speech about Smart Cities, IoT - and specially what is behind of the marketing involved into these topics.
Max Lemke - Smart cities: a fertile ground for Internet innovation
1) Smart cities are a fertile ground for internet innovation and are key locations for experimenting with new ICT technologies and services.
2) The European Commission supports smart cities through various programs that aim to promote internet innovation, such as the Digital Agenda for Europe and Future Internet Public-Private Partnership.
3) Living labs and smart cities play an important role in these programs by bringing users and stakeholders together to test new internet-based services in real-world environments.
Max Lemke - Smart Cities: A fertile ground for Internet innovation
The document discusses how smart cities are a fertile ground for internet innovation and how various European initiatives support this. It outlines how smart cities can help test and deploy new internet technologies and services and drive innovation as part of the European Digital Agenda. Living labs play a role in experimenting with technologies in smart cities and getting user input.
Intelligent cities: A new planning paradigm. 15 years research at Urenio
This document discusses the concept of intelligent or smart cities as a new urban planning paradigm. It provides background on the rise of literature around intelligent cities since 2001 and defines intelligent cities from several perspectives. It then outlines the theoretical research conducted at URENIO, including models of intelligent city structure, operation, and strategic planning. Applied research at URENIO is presented, including the development of software applications and projects implementing intelligent city solutions.
20090327 Software Engineering -- What's in it for me?
Presentation about the opportunities for funding in Software and Services, esp in the FP7 ICT Work Programme, ITEA2, and Artemis, for the CSMR conference, Kaiserslautern (Germany), 27 March 2009
Similar to Io t #11 introduction and closing slides (20)
Webinar 1: Situating Canadian Cities in an International Smart City Ecosystem
Webinar 1: Situating Canadian Cities in an International Smart City Ecosystem
Michael Nilsson - Towards Future Internet: What can it mean for Living Labs a...
Michael Nilsson - Towards Future Internet: What can it mean for Living Labs a...
Self-Improving Sustainable Intelligent Transport System (ITS) Using Video Con...
Self-Improving Sustainable Intelligent Transport System (ITS) Using Video Con...
Keynote: Making Smarter Tuscany and Florence with Km4City
Keynote: Making Smarter Tuscany and Florence with Km4City
Max Lemke - Smart cities: a fertile ground for Internet innovation
Max Lemke - Smart cities: a fertile ground for Internet innovation
Max Lemke - Smart Cities: A fertile ground for Internet innovation
Max Lemke - Smart Cities: A fertile ground for Internet innovation
Intelligent cities: A new planning paradigm. 15 years research at Urenio
Intelligent cities: A new planning paradigm. 15 years research at Urenio
20090327 Software Engineering -- What's in it for me?
20090327 Software Engineering -- What's in it for me?
More from WMG, University of Warwick
Dr Weisi Guo, University of Warwick
Dr. Weisi Guo is an assistant professor at the University of Warwick who runs a research team studying big data, wireless networks, and smart cities. His research focuses on integrating big data analytics into traditional ICT systems to help design solutions for cities. He has received several awards for his work. At Warwick, he is involved with the Warwick Institute for Science of Cities and collaborations with other universities on smart city research through organizations like the Centre for Urban Science and Progress. His research examines how social media data can act as a sensor to understand cities and services by providing high resolution spatial, temporal, and contextual data on issues like sentiment mapping and complex network analysis.
Mike Waters,Coventry City Council
The document discusses mobility as a service (MaaS) and the public sector's role in developing intelligent mobility solutions in the West Midlands region of the UK. It outlines the population growth and challenges around air quality and obesity facing the region. The public sector aims to develop an effective MaaS system using live travel data and payment systems to incentivize sustainable travel choices. Key priorities include integrated ticketing/fares, travel information, data management, and reducing emissions. The roles of public and private sectors in developing technology platforms, data collection, and innovation are also discussed.
Dr Rick Robinson, amey
The document discusses how cities and technology have evolved over the past century and how new technologies like Big Data and the Internet of Things will transform cities in the future. It notes that by 2050, there will be 3 billion more urban citizens, and that traditional businesses are being disrupted by new platform models. New opportunities exist at the intersection of technology and industries like transportation, utilities and waste management to create smarter cities and a circular economy. Entrepreneurs need to focus on creating value by getting the right resources to the right places at the right time through new business models and technologies.
Amanda Randle, AQMesh
AQMesh is a small, weatherproof air quality monitoring unit that can take measurements of various gases and particulates and transmit data online. It offers local authorities and organizations an affordable way to monitor air quality for research, compliance, and traffic management purposes. While AQMesh provides near real-time data access and sharing capabilities, there are issues around stakeholders, public interest in air quality, and whether the data will be used effectively. Performance is key to broader adoption of the technology. AQMesh has been used in smart city projects involving multiple pods deployed across cities.
Failure Mode Effect Analysis
This document provides an introduction and overview of Failure Mode Effect Analysis (FMEA). FMEA is used across several industries including automotive, aerospace, military, and others to analyze potential failures, their causes and effects. The document outlines the steps to conduct an FMEA, including defining the item or process being analyzed, identifying potential failure modes and their causes and effects, analyzing current prevention and detection controls, and determining a risk priority number. It then provides a sample FMEA analysis for purchasing milk for a lactose intolerant child, identifying potential failures from purchasing the wrong milk to packaging issues, and assessing prevention controls, occurrence, detection and severity to calculate risk.
Mythbusting alm for circulation
3D printing has several myths and realities. It is not as quick or easy as imagined, as it requires multiple software programs and equipment steps to produce a finished part. While high quality parts can be 3D printed, the speed is too slow to replace mass production. Scanning technologies provide point cloud data that is difficult to convert into CAD files. Large parts can now be 3D printed, but large printers are very expensive. 3D printing is best for applications where time is important, such as rapid prototyping, low volume production, or customized parts.
Playing with data and industry 4.0
The document summarizes key points about smart manufacturing and moving to Industry 4.0. Part 1 discusses the value of data collection from machines and processes, and provides case studies on using sensors to monitor machine efficiency and oven temperature. Part 2 defines Industry 4.0 as the fourth industrial revolution, outlines its 6 design principles, and notes benefits for small businesses including faster response, improved productivity and flexibility. It concludes with an interactive quiz to self-assess a company's readiness for Industry 4.0.
Applying Lean and Assessing plants
This document outlines an agenda for a presentation on applying Lean principles and assessing manufacturing plants. The presentation covers Lean implementation, Lean principles like focusing on customer value, and conducting a Rapid Plant Assessment (RPA) using a 20 question questionnaire and rating sheet to evaluate a plant's "leanness". The RPA involves observing all aspects of plant operations, including safety, organization, visual management systems, and empowered employee teams.
Introduction to Productivity
This document discusses productivity, including its definition, measurement, and explanations for growth. It provides the following key points:
1. Productivity is defined as output per input, where output is value added and input includes costs of labor, capital, and bought goods and services. Productivity can be measured at the firm, sector, or economy level.
2. Productivity is commonly measured as labor productivity (value added per worker) or total factor productivity (amount output exceeds inputs). International comparisons examine levels in a common currency or growth rates in national currencies.
3. Recent productivity growth rates have been below long-term trends in many countries. Increased investment in capital equipment, skills, R&D, and
Introduction to Productivity Slides, Skills and Productivity
The document summarizes a conference on smart manufacturing tools and technologies to boost productivity. The agenda for the full-day conference is provided, with sessions on topics like lean manufacturing, industry 4.0, additive layer manufacturing, and skills development. The document also discusses how improving productivity has become a key priority for the UK government and how boosting productivity among SMEs is important since they account for much of the private sector economy and job growth. The WMG SME group is introduced as focusing on supporting SMEs through research-led innovation and skills programs.
Nigel Maris & Tom Screen, Assembled Electronics Solutions Ltd
Disruptive innovation is defined as bringing together dissimilar skills and expertise to creatively solve problems in novel ways. The Internet of Everything (IoE) is growing exponentially, connecting everything and integrating 38.5 billion devices by 2020. This connectivity allows for monitoring vehicle and equipment data via dashboards and storing it in the cloud for management review. Predictive maintenance using IoE provides value through business continuity, preventing downtime costs which exceed component costs. Companies must harness IoE's power through innovative joined technologies or risk falling behind competitors providing these services.
Jeff Stewart, M2M CloudFactory
The document describes MIIMETIQ, a development suite for the Industrial Internet of Things. MIIMETIQ provides infrastructure and tools to connect, manage and analyze data from IoT devices and systems across various industries like smart cities, agriculture, manufacturing and more. It offers features like a control panel, device management, data analytics, APIs and can be used by system integrators, hardware suppliers and end users. The suite also supports hosting applications on customer servers, in the cloud, or on systems like IBM Softlayer. An example is given of using MIIMETIQ to monitor and control over 5,000 diesel generators worldwide.
Chunyang Xu, Dekon Company Ltd
Dr. Xu from Dekon Company Limited presents iHomer, a new home alarm system that uses motion sensors and WiFi connectivity to alert smartphone users when an intruder is detected. iHomer sensors are independent, easy to install, and can detect any movement without needing angle adjustments. The system allows users to view their home status on smart devices and potentially work with mini drones for surveillance.
Emma Hockley, Big Bear Plastics, Thermoforming and Materials
Big Bear specializes in thermoforming large and medium-sized plastic parts using single-sheet, twin-sheet, and pressure forming machines. They have experience forming a wide variety of plastic materials and can advise customers on material selection. Some advantages of thermoforming include low tooling costs, the ability to tailor tools for specific part volumes, and forming large parts difficult to make with other molding processes. However, thermoforming has higher per-part costs than injection molding due to sheet extrusion and trim waste.
Neil Reynolds, WMG University of Warwick, Innovations in Composite Materials ...
Neil Reynolds, WMG University of Warwick, Innovations in Composite Materials ...WMG, University of Warwick
The document summarizes research being conducted at the Automotive Composites Research Centre (ACRC) to develop processing technologies for high-volume structural application of composites in the automotive industry. The ACRC aims to reduce costs through materials, processing, and simulation technologies while considering factors like recyclability and integration. The research utilizes both traditional analytical techniques and industrially-relevant tools like pre-preg compression molding, carbon fiber-SMC, rapid stamp-forming of aligned thermoplastics, and RTM. Key capabilities at ACRC include processing technologies, joining techniques, automation, and performance testing to provide data for simulations enabling component design.Graeme Herlihy, Engel UK, MuCell Process
This document introduces MuCell®, a process for foaming thermoplastics using gases like nitrogen or carbon dioxide. MuCell® injects gas into the melt to create an internal and homogenous post-pressure that reduces weight, warpage, and clamp force while allowing for new filling strategies. The foaming agent also lowers viscosity for improved filling. MuCell® enables reduced cycle times through optimized cooling and nearly eliminated hold times. It reduces filling pressure and the need for external holding pressure. Special material grades and process optimizations can improve surface quality by reducing streaks. MuCell® is applicable for volumetrically filling cavities and increasing cavity thickness.
Polymer Innovation Network "Innovations in Plastic Processing"
This document summarizes an event hosted by the Polymer Innovation Network on innovations in plastic processing. The agenda includes presentations on innovations in composite materials processing, microcellular foam molding, and thermoforming materials advances. There will also be two-minute introductory pitches from various organizations. The goal of the event is to stimulate discussion on plastics issues, build collaborative networks, and highlight funding opportunities regarding molding, forming, hybrid processes, materials, recycling, and rapid manufacturing of polymers. Attendees will have a chance to provide feedback on the event format and suggest topics for future Polymer Innovation Network gatherings.
Robert Harrison, WMG - IIoT and Industry 4.0 in Automation Systems Engineering
Robert Harrison, WMG - IIoT and Industry 4.0 in Automation Systems EngineeringWMG, University of Warwick
Robert Harrison's presentation discusses how automation systems are being shaped by new technologies like IoT, Industry 4.0, and cyber-physical systems. The Automation Systems Group provides lifecycle support for automation projects including virtual engineering, engineering services, and user-driven applications. Examples include developing powertrain systems for Ford and electric machines for JLR. Digital automation uses a common engineering model across the virtual design, physical implementation, and operational phases. This allows for real-time updates and optimization. Mobile apps and augmented reality can provide workers with access to engineering data, maintenance instructions, and sensor readings to support tasks.Jon Hill InVMA - Real Industrial Case Studies creating Value with IoT
Presentation from Internet of Things Midlands event on 8th September, 2015: http://www.meetup.com/IoTMidlands/events/223960036/
More from WMG, University of Warwick (20)
Introduction to Productivity Slides, Skills and Productivity
Introduction to Productivity Slides, Skills and Productivity
Nigel Maris & Tom Screen, Assembled Electronics Solutions Ltd
Nigel Maris & Tom Screen, Assembled Electronics Solutions Ltd
Emma Hockley, Big Bear Plastics, Thermoforming and Materials
Emma Hockley, Big Bear Plastics, Thermoforming and Materials
Neil Reynolds, WMG University of Warwick, Innovations in Composite Materials ...
Neil Reynolds, WMG University of Warwick, Innovations in Composite Materials ...
Polymer Innovation Network "Innovations in Plastic Processing"
Polymer Innovation Network "Innovations in Plastic Processing"
Robert Harrison, WMG - IIoT and Industry 4.0 in Automation Systems Engineering
Robert Harrison, WMG - IIoT and Industry 4.0 in Automation Systems Engineering
Jon Hill InVMA - Real Industrial Case Studies creating Value with IoT
Jon Hill InVMA - Real Industrial Case Studies creating Value with IoT
Recently uploaded
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Recently uploaded (20)
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Io t #11 introduction and closing slides
- 1. IoT Midlands #11 Smart Cities
- 2. Thanks to our Sponsors
- 3. Aim of IoTMidlands Software Developers Electronics Manufacturers UX Experts Transport Economists Academic research Telematics Web development Data analysis RFID and NFC Smartphones Cloud technology COLLABORATION INNOVATION
- 4. Postscapes IoT : Smart City Awards http://iotawards.postscapes.com/
- 5. (USA)
- 7. Smart Cities Readers’ Choice (Korea)
- 8. Postscapes: 4 Smart City themes
- 9. Tonight’s speakers Amanda Randle, AQMesh Local air quality measurements online Mike Waters, Head of Transport Infrastructure at Coventry City Council Visions of a SMART Coventry & West Midlands – what the public sector is doing Rick Robinson, IT Director (Smart Data and Technology) at Amey Big data, open data and telepathy: building Smart Cities as if people mattered Dr Weisi Guo, Assistant Professor at Warwick University School of Engineering How Big Data can Guide the Deployment of Small IoT Hubs
- 10. EU trip – innovation study tour UK delegation to SE Europe SmartCities Expo Departs UK April 4th (til 8th) Incl. a strategic workshop in B’ham facilitated by ex-editor, CleanTech Investor magazine. Plus accompanying media crew. Bursaries available subject to eligibility. www.contented.net/next Additional trip to Vilnius in June.
- 11. Thankyou Next meetup will be 12th July 2016 www.meetup.com/IoTmidlands Fancy doing a show and tell? Send your presentation idea to: scott.crowther@warwick.ac.uk