The document discusses various interpolation methods used in CNC machining, including linear, circular, and parametric interpolation. It notes that while linear interpolation is simple, it results in faceted tool paths and reduced accuracy. Circular interpolation allows curved tool paths but is limited to 2 axes. Parametric interpolation, including NURBS, generates points directly on the desired curve, avoiding segmentation issues and allowing higher speeds and accuracy. NURBS interpolation in particular allows more efficient representation of complex geometries.
What is process planning .Difficulties in traditional process planning,CAPP Model,Types of CAPP ,1.Retrieval type CAPP (variant) systems.
2.Generative CAPP systems.
3.Hybrid CAPP systems.
Process planning system , Machinability data systems , Benefits of CAPP
What is process planning .Difficulties in traditional process planning,CAPP Model,Types of CAPP ,1.Retrieval type CAPP (variant) systems.
2.Generative CAPP systems.
3.Hybrid CAPP systems.
Process planning system , Machinability data systems , Benefits of CAPP
Introduction ,FMS Equipment,FMS Layouts ,Analysis Methods for FMS,,advantages of fms,comparison of fms to conventional methods,applications.Benefits of fms.
COMPUTER AIDED PROCESS PLANNING (CAPP)KRUNAL RAVAL
Computer-aided process planning (CAPP) helps determine the processing steps required to make a part after CAP has been used to define what is to be made. CAPP programs develop a process plan or route sheet by following either a variant or a generative approach.
ANALYSIS OF TRANSFER LINE WITH BUFFER STORAGEManoj Gowda K
An automated transfer line is consisted of several workstations which are linked together by a material handling system where parts are transferred from one station to the next.
Introduction to CNC machine and Hardware. aman1312
Complete detailing of cnc machine and its operations with its required hardware necessary for increasing its Automation and increasing its manufacturing capability. Also increase in complex shape manufacturing.
GT Definition,Implementing Group Technology (GT),four methods GT, 1.OPTIZ PARTS CLASSIFICATION AND CODING SYSTEM,2.MICLASS coding system ,CODE MDSI System,BENEFITS OF GROUP TECHNOLOGY and limitations.
Computer Numerical Control (CNC) Machining is the process through which computers control machine-based processes in manufacturing. The kinds of machines controlled include lathes, mills, routers and grinders – all used for manufacturing of metal and plastic products.
Quick NC simulation & verification for high speed machiningLiu PeiLing
Numerical Control (NC) machining is the cutting edge of modern manufacturing technology. NC errors could break cutter edges, destroy work pieces and even damage the machine tool. In recent years, more and higher speed cutting is applied in the industry due to the advancement of machine tool technology and the demand of shorter production time. However, checking the NC codes for high speed machining is difficult due to the lack of information on material removal rate and the large size of NC blocks. In this paper, a novel high speed NC simulation method in an extended Z-map approach is presented, which offers higher simulation accuracy of the resulted geometry and with reasonable cutting load calculation. In conclusion the authors propose the pervasive manufacturing modeling and simulation for multi machining and layered manufacturing processes.
Introduction ,FMS Equipment,FMS Layouts ,Analysis Methods for FMS,,advantages of fms,comparison of fms to conventional methods,applications.Benefits of fms.
COMPUTER AIDED PROCESS PLANNING (CAPP)KRUNAL RAVAL
Computer-aided process planning (CAPP) helps determine the processing steps required to make a part after CAP has been used to define what is to be made. CAPP programs develop a process plan or route sheet by following either a variant or a generative approach.
ANALYSIS OF TRANSFER LINE WITH BUFFER STORAGEManoj Gowda K
An automated transfer line is consisted of several workstations which are linked together by a material handling system where parts are transferred from one station to the next.
Introduction to CNC machine and Hardware. aman1312
Complete detailing of cnc machine and its operations with its required hardware necessary for increasing its Automation and increasing its manufacturing capability. Also increase in complex shape manufacturing.
GT Definition,Implementing Group Technology (GT),four methods GT, 1.OPTIZ PARTS CLASSIFICATION AND CODING SYSTEM,2.MICLASS coding system ,CODE MDSI System,BENEFITS OF GROUP TECHNOLOGY and limitations.
Computer Numerical Control (CNC) Machining is the process through which computers control machine-based processes in manufacturing. The kinds of machines controlled include lathes, mills, routers and grinders – all used for manufacturing of metal and plastic products.
Quick NC simulation & verification for high speed machiningLiu PeiLing
Numerical Control (NC) machining is the cutting edge of modern manufacturing technology. NC errors could break cutter edges, destroy work pieces and even damage the machine tool. In recent years, more and higher speed cutting is applied in the industry due to the advancement of machine tool technology and the demand of shorter production time. However, checking the NC codes for high speed machining is difficult due to the lack of information on material removal rate and the large size of NC blocks. In this paper, a novel high speed NC simulation method in an extended Z-map approach is presented, which offers higher simulation accuracy of the resulted geometry and with reasonable cutting load calculation. In conclusion the authors propose the pervasive manufacturing modeling and simulation for multi machining and layered manufacturing processes.
Aplanning algorithm offive-axis feedrate interpolation based on drive and jer...IJRES Journal
CNC technology marks the core of modern manufacturing, and CNC interpolation module is one of the most important numerical control technology modules. Avery important feature of the CNC is to implement the feed rate that consists in producing the set points based on a NC program. In the high speed machining, the feed rate is restricted by the velocity, acceleration, and jerk. And the NURBS curve is a free curve, due to the many advantages of NURBS curves, it can be well applied to the CNC feed rate interpolation. The algorithm can get more smooth feed rate curves, which makes better use of kinematical characteristics of the machine. Finally, according to each machine axis capability, one can use the feed rate control method which is verified by simulation analysis and processing to test this method. The results show that the algorithm can effectively control the speed, acceleration and jerk.
Here in this presentation we will be dealing with Nurbs and the major difference between polygons and nurbs, modelling, technical specifications, basic control points, general equations of nurbs and nurb surfaces, nurb manpulating, knob removal
Numerical Control (NC) machine tools – CNC types, constructional details, special features, machining centre, and part programming fundamentals CNC – manual part programming – micromachining – wafer machining
CNC Programming for Begainer.
1.Easy Mehtod.
2.Complete Theoritical Knowledge.
3.Motion and coordinate system for NC machine.
4.Axes convention of VMC & HMC.
5.How to make Part Programming.
6.Coordinates System.
7.Programming Format.
8.List of G Codes And M Codes.
9.How to Use of Above Codes In Programme.
10.Reference Point and Return of Machine.
Low Speed Estimation of Sensorless DTC Induction Motor Drive Using MRAS with ...IJECEIAES
This paper presents a closed loop Model Reference Adaptive system (MRAS) observer with artificial intelligent Nuero fuzzy controller (NFC) as the adaptation technique to mitigate the low speed estimation issues and to improvise the performance of the Sensorless Direct Torque Controlled (DTC) Induction Motor Drives (IMD). Rotor flux MRAS and reactive power MRAS with NFC is explored and detailed analysis is carried out for low speed estimation. Comparative analysis between rotor flux MRAS and reactive power MRAS with PI as well as NFC as adaptive controller is performed and results are presented in this paper. The comparative analysis among these four speed estimation methods shows that reactive power MRAS with NFC as adaptation mechanism shows reduced speed estimation error and actual speed error at steady state operating conditions when the drive is subjected to low speed operation. Simulation carried out using MATLAB-Simulink software to validate the performance of the drive especially at low speeds with rated and variable load conditions.
General stiffness model for five-axis CNC machiningIJRES Journal
Five-axis CNC machining has become an important method for processing thin-walled parts. However, compared with the traditional three-axis machine system, the tool path planning becomes more difficult especially in high-speed and accuracy machining process. In this paper, taking into consideration the rigidity establishes a general stiffness model in order to increase the surface quality, restrain the chatter of the machine and provide a reference for tool path planning. The model considerate the comprehensive impact of the tool posture, tool overhang length, transmission axis of the machine and the parts, in which the finite element method and the principal of virtual-work are applied.
GRAPH MATCHING ALGORITHM FOR TASK ASSIGNMENT PROBLEMIJCSEA Journal
Task assignment is one of the most challenging problems in distributed computing environment. An optimal task assignment guarantees minimum turnaround time for a given architecture. Several approaches of optimal task assignment have been proposed by various researchers ranging from graph partitioning based tools to heuristic graph matching. Using heuristic graph matching, it is often impossible to get optimal task assignment for practical test cases within an acceptable time limit. In this paper, we have parallelized the basic heuristic graph-matching algorithm of task assignment which is suitable only for cases where processors and inter processor links are homogeneous. This proposal is a derivative of the basic task assignment methodology using heuristic graph matching. The results show that near optimal assignments are obtained much faster than the sequential program in all the cases with reasonable speed-up.
![Outlines ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)