Visit www.seminarlinks.blogspot.com to Download.
The intersection of railway track and the road at the same level is referred to as a level crossing. In the urban areas the level crossing is generally monitored by qualified railway personnel who monitor the train movement and close the level crossing gate to stop the interfering road traffic but such closing of gates leads to congestion in road traffic and also causes loss of time to road users. Road under bridge and road over the bridge are considered as solutions for avoiding level crossings of roads and railway track.
Visit www.seminarlinks.blogspot.com to Download.
The intersection of railway track and the road at the same level is referred to as a level crossing. In the urban areas the level crossing is generally monitored by qualified railway personnel who monitor the train movement and close the level crossing gate to stop the interfering road traffic but such closing of gates leads to congestion in road traffic and also causes loss of time to road users. Road under bridge and road over the bridge are considered as solutions for avoiding level crossings of roads and railway track.
Presentation describes important designing parameters, reasons for formwork failures and prevention of such failures. It also touches upon remedial measures.
Cracks on concrete.
How to catergorized cracks on newly poured concrete
Thermal cracks
Mass concrete
Fresh concrete
Cracks on concrete have many causes. They may affect appearance only, or it may indicate significant structural distress
How Flat Roof Garages Can Be A Better ChoiceBehm Design
These garage plans are great for blending with homes of this style are are often hard to find. Flat roof garage plans also minimize blocking of light and view which can be important siting issues in dense settings.
Ready Mixed Concrete. RMC Production. Ready-Mix Concrete (RMC) Manufacturing Plant. A Revolution in Production of Concrete
Ready-mix concrete (RMC) is a mixture of cement, water, sand and aggregates. Manufacturing ready-mix concrete and delivering through a transit mixer enables the implementation of precise concrete in the construction project, making it sturdy, strong and long lasting. Ready-mix concrete is particularly advantageous when small quantities of concrete or intermittent placing of concrete are required. Ready-mixed concrete is also ideal for large jobs where space is limited and there is little room for a mixing plant and aggregate stockpiles.
Ready mixed refers to concrete that is batched for delivery from a central plant instead of being mixed on the job site. Each batch of ready-mixed concrete is tailor-made according to the specifics of the contractor and is delivered to the contractor in a plastic condition, usually in the cylindrical trucks often known as "cement mixers."
Ready mix concrete is sometimes preferred over on-site concrete mixing because of the volume it can produce with precision of proportion of mixtures and also due to reduced work site confusion. Using a pre-determined concrete mixture reduces flexibility, both in the supply chain and in the actual components of the concrete.
See more
https://goo.gl/ZH6RJH
https://goo.gl/g6k567
https://goo.gl/kCHFGV
Contact us:
Niir Project Consultancy Services
An ISO 9001:2015 Company
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
Ready Mix Concrete, Ready Mix Concrete Plant, Ready Mixed Concrete Mixing Plant, Ready Mix Concrete Plant in India, RMC Plant, Ready-Mix Concrete Batching Plant, Ready Mix Concrete Plant Cost, Ready Mix Concrete Project Report, Ready Mix Concrete Process, Ready Mix Concrete Pdf, RMC Plant Process, Properties of Ready Mix Concrete, Manufacturing of Concrete / Ready-Mix Concrete, Ready Mixed Concrete Industry, Concrete Batching Plant, Concrete Batching Plant, How to Start a Ready-Mixed Concrete Business, Ready Mixed Concrete (RMC), Ready Mix Concrete Business Plan, Ready Mix Concrete Plant Setup Cost, Ready Mixed Industry, Concrete Construction, How to Start a Small Concrete Business, Setting up a Ready-Mix Concrete Manufacturing, Production of Ready Mix Concrete (RMC), Cement Factory, Cement Manufacturing, Ready-Mix Concrete Manufacturing, Manufacturing Process of Cement, Ready Mix Concrete Batching Plant, Project Report on Cement Manufacturing Industry, Ready Mix Concrete Applications, Detailed Project Report on Ready Mix Concrete Plant, Project Report on Ready Mix Concrete Plant, Pre-Investment Feasibility Study on Ready Mix Concrete Plant, Techno-Economic feasibility study on Ready Mix Concrete Plant,
All Prefabricated Vertical Drains (PVD) will be
installed in the same manner, unless otherwise
specified by CLIENT. This method statement
describes all steps in the process of installing the
Prefabricated Vertical Drains.
Presentation describes important designing parameters, reasons for formwork failures and prevention of such failures. It also touches upon remedial measures.
Cracks on concrete.
How to catergorized cracks on newly poured concrete
Thermal cracks
Mass concrete
Fresh concrete
Cracks on concrete have many causes. They may affect appearance only, or it may indicate significant structural distress
How Flat Roof Garages Can Be A Better ChoiceBehm Design
These garage plans are great for blending with homes of this style are are often hard to find. Flat roof garage plans also minimize blocking of light and view which can be important siting issues in dense settings.
Ready Mixed Concrete. RMC Production. Ready-Mix Concrete (RMC) Manufacturing Plant. A Revolution in Production of Concrete
Ready-mix concrete (RMC) is a mixture of cement, water, sand and aggregates. Manufacturing ready-mix concrete and delivering through a transit mixer enables the implementation of precise concrete in the construction project, making it sturdy, strong and long lasting. Ready-mix concrete is particularly advantageous when small quantities of concrete or intermittent placing of concrete are required. Ready-mixed concrete is also ideal for large jobs where space is limited and there is little room for a mixing plant and aggregate stockpiles.
Ready mixed refers to concrete that is batched for delivery from a central plant instead of being mixed on the job site. Each batch of ready-mixed concrete is tailor-made according to the specifics of the contractor and is delivered to the contractor in a plastic condition, usually in the cylindrical trucks often known as "cement mixers."
Ready mix concrete is sometimes preferred over on-site concrete mixing because of the volume it can produce with precision of proportion of mixtures and also due to reduced work site confusion. Using a pre-determined concrete mixture reduces flexibility, both in the supply chain and in the actual components of the concrete.
See more
https://goo.gl/ZH6RJH
https://goo.gl/g6k567
https://goo.gl/kCHFGV
Contact us:
Niir Project Consultancy Services
An ISO 9001:2015 Company
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
Ready Mix Concrete, Ready Mix Concrete Plant, Ready Mixed Concrete Mixing Plant, Ready Mix Concrete Plant in India, RMC Plant, Ready-Mix Concrete Batching Plant, Ready Mix Concrete Plant Cost, Ready Mix Concrete Project Report, Ready Mix Concrete Process, Ready Mix Concrete Pdf, RMC Plant Process, Properties of Ready Mix Concrete, Manufacturing of Concrete / Ready-Mix Concrete, Ready Mixed Concrete Industry, Concrete Batching Plant, Concrete Batching Plant, How to Start a Ready-Mixed Concrete Business, Ready Mixed Concrete (RMC), Ready Mix Concrete Business Plan, Ready Mix Concrete Plant Setup Cost, Ready Mixed Industry, Concrete Construction, How to Start a Small Concrete Business, Setting up a Ready-Mix Concrete Manufacturing, Production of Ready Mix Concrete (RMC), Cement Factory, Cement Manufacturing, Ready-Mix Concrete Manufacturing, Manufacturing Process of Cement, Ready Mix Concrete Batching Plant, Project Report on Cement Manufacturing Industry, Ready Mix Concrete Applications, Detailed Project Report on Ready Mix Concrete Plant, Project Report on Ready Mix Concrete Plant, Pre-Investment Feasibility Study on Ready Mix Concrete Plant, Techno-Economic feasibility study on Ready Mix Concrete Plant,
All Prefabricated Vertical Drains (PVD) will be
installed in the same manner, unless otherwise
specified by CLIENT. This method statement
describes all steps in the process of installing the
Prefabricated Vertical Drains.
1. ABI Expansion Joints Advantages
2. Engineering
3. Manufacturing
4. Testing
5. Product Offering
6. ABI product applications
7. Benefits of program to you
Emseal expansion joint and precompressed sealant catalog for architecture and...EMSEAL Joint Systems, Ltd.
EMSEAL expansion joints, precompressed sealants, and expansion joint covers have set the standard for durability and performance in structural expansion joint applications in the construction industry. Watertight, fire-rated, traffic durable, acoustic dampening, and high movement capable.
Joint construction Donnarumma & Shrestha 2011, EATAW conference, IrelandPrithvi Shrestha
It is a presentation that I gave at the European Association for Teaching Academic Writing (EATAW) at the University of Limerick, Ireland (29 June - 1 Jult 2011).
Staircase is a very important interior element which needs meticulous planning and treatment .It is also a visual treat if aesthetics are considered as well.
Design of rigid pavements. IRC method of design of rigid pavement. Transportation Engineering. Civil Engineering. Wheel loads on rigid pavement. Action of various stresses on rigid pavement. Highway engineering. How rigid pavements different from flexible pavements
1st presentation of my life . It was a group presentation . Thanks to all of our group members for there contribution.
This presentation is all about Deep Foundation. Hope you will find it important.
There are two stitching methods used to repair and strengthen longitudinal cracks or joints in concrete pavement. The first, and most common, is cross-stitching. Cross-stitching uses deformed tie bars epoxied or grouted into holes drilled at an angle through a crack or joint. The second, slot-stitching, uses deformed tie bars grouted into slots cut across a joint or crack. Each technique is beneficial for certain circumstances. Recommendations on where to use these methods are outlined in this special report.
Soil nailing is a technique used to reinforce and strengthen existing ground.Soil nailing consists of installing closely spaced bars into a slope or excavation as construction proceeds from top down.It is an effective and economical method of constructing retaining wall for excavation support, support of hill cuts, bridge abutments and high ways.This process is effective in cohesive soil, broken rock, shale or fixed face conditions.
Your Score 1420Not bad. Your score means youre slightly bette.docxodiliagilby
Your Score: 14/20
Not bad. Your score means you're slightly better than the average at reading expressions. And research suggests that people can improve their emotion recognition skills with practice. So keep an eye out for our forthcoming empathy training tool, designed to boost your emotional intelligence. Sign upfor our e-newsletter for updates on it.
Drilling Engineering
Class 8
1
Casing
• What is casing?
• Pipe that is API certified for its specific application
• Why is casing set?
• Zonal Isolation when cemented in place
• Casing point selection
• Regulations
• Area Geology
• Formation Pressures
• As the operator, who decides on casing points?
2
Casing
• API casing is available in standard sizes from 4-1/2” to 20” OD
• Usually steel but can be aluminum, fiberglass, stainless steel,
plastic, titanium etc.
• One piece of casing pipe is referred to as a “joint” of casing
• Casing length is dependent on the “range” of pipe
• Range-1: 18-22ft
• Range-2: 27-30ft
• Range-3: 38-45ft
• Casing Threads are defined by the coupling type
• API Threads
• LTC: Long thread coupling
• STC: Short thread coupling
• BTC: Buttress thread coupling
• Semi & Premium Threads
• See VAM Presentation
3
Casing
• Casing Components
• Casing
• Size, Weight, Grade, Threads
• 9-5/8" 53.5# P-110 LTC Rg 3
• See Casing Data Chart
• What is Drift Diameter?
• Pup Joints
• Float Collars
• Float Shoe
• Guide Shoe
• Centralizers
• Baskets
• Scratchers/Scrapers
4
Casing
• Running Casing
• Bales/Elevators
• Power Tongs
• Torque Turn
• Calculate weight and Hookload HL
• Calculate collapse, how often should you fill the pipe?
• Is the pipe taking the proper amount of fluid to fill? CSGcap
• Is the proper amount of fluid coming back to the pits as the
casing is run in the hole? CSGcap & CSGdisp
• Once casing is landed, circulated mud. Calculate B/U
5
Casing
• Centralization
• Vertical Wells
• Never truly vertical, usually spiral
• Typically use bow spring type centralizers
• There are state regulations on centralizer placement
• The shoe is very important to be centralized
• Horizontal Wells
• Balance between too many and not enough centralizers
• Many types: rigid, floating, bow spring, bladed, spiral bladed, etc.
• Centralizer design software can model the well as drilled and suggest
centralizer placement
• High dogleg areas need more frequent centralizers to obtain
sufficient standoff
6
Casing
• Stand-off
• Pipe Stand-off is a major contributor to hole cleaning, mud
removal, and cement quality.
• % 𝑆𝑡𝑎𝑛𝑑𝑜𝑓𝑓 = ൗ𝑊𝑛 𝑅2−𝑅1 ∗ 100%
7
Casing
• Stand-off
• The Stand-off formula results a percentage, where 0% represents
the pipe in contact with the wellbore wall. 100% represents the
pipe is perfectly centered in the well.
• When the pipe is not centered, the wider portions will promote
flow due to less resistance. There can be pockets of cuttings or
mud in the tighter areas causing
The purpose is to provide a standard approach and encouraging carrying out concreting works. This includes the planning, preparation, and arrangement of resources prior to the concreting works.
Box Pushing Technique was adopted to form abutments and construction of RCC road slab in between the abutments to construct the Underpass below running railway tracks.
Dan Staebell with Cargill examines the use of WMA, RAP and other technologies to lower asphalt's carbon footprint in a presentation delivered during the CalAPA Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Marco Estrada with PRS provides an industry perspective of cold in-place recycling in a presentation delivered during the CalAPA Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Dr. Dave Jones of the University of California Pavement Research Center provides an academic perspective of in-place recycling in a presentation delivered during the CalAPA Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Larry Hernandez with Caltrans provides the department's perspective on in-place recycling in a presentation delivered during the CalAPA Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Dr. John Harvey, director, University of California Pavement Research Center, reviews the most recent research with regard to Reclaimed Asphalt Pavement during a presentation delivered during the CalAPA Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Erik Updyke, project manager for the City & County Pavement Improvement Center, focuses on pavement quality for local agencies in a presentation delivered during the CalAPA Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Buzz Powell, technical director, Asphalt Pavement Alliance, examines various trends in the industry from a national perspective in a presentation delivered during the CalAPA Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Chris Sparks with MacRebur delves into the utilization of reclaimed plastics into asphalt pavement mixes delivered during the CalAPA Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Scott Dmytrow with PavementACES, a noted pavement preservation expert, provides an update on various tools and techniques in the pavement preservation space delivered during the CalAPA Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Presentation by Joseph Dongo of Caltrans on the department's eTicketing initiative for construction materials transport delivered during the CalAPA Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Alex Richardson with Haul Hub delivers a presentation on eTicketing technology delivered during the CalAPA Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Presentation on Environmental Product Declarations and benchmarking delivered by Amlan Mukherjee of WAP Sustainability during the CalAPA Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario.
Presentation by Cathrina Barros of Caltrans, co-chair of the Women of Asphalt California Branch, on Women of Asphalt Activities in 2023 and 2024 delivered during the CalAPA Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario
Presentation on the City & County Pavement Improvement Center delivered at the California Asphalt Pavement Association Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Presentation by Sean Devine of X-B-E on the "Hey NAPA" research tool utilizing AI technology, and other implications of AI for our industry, delivered at the California Asphalt Pavement Association Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
An overview of the Caltrans District 8 program and priorities delivered at the California Asphalt Pavement Association Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Update on the Joint Training & Certification Program for materials technicians in California delivered at the California Asphalt Pavement Association Spring Asphalt Pavement Conference March 7-8, 2024 in Ontario, Calif.
Presentation on "Pointers & TIps" related to Environmental Product Declarations (EPDs) from the perspective of an asphalt plant expert delivered by T.J. Young at the CalAPA EPD workshop on Oct. 25, 2023 in Sacramento.
Presentation titled "The Emerald Eco-Label Tool & Lessons Learned" delivered by Amlan Mukherjee, Ph.D., P.E. of WAP Sustainability Consulting at the CalAPA EPD workshop on Oct. 25, 2023 in Sacramento.
Presentation on the national perspective on Environmental Product Declarations (EPDs) delivered by Joseph Shacat of the National Asphalt Pavement Association (NAPA) at the CalAPA EPD workshop on Oct. 25, 2023 in Sacramento.
More from California Asphalt Pavement Association (20)
CW RADAR, FMCW RADAR, FMCW ALTIMETER, AND THEIR PARAMETERSveerababupersonal22
It consists of cw radar and fmcw radar ,range measurement,if amplifier and fmcw altimeterThe CW radar operates using continuous wave transmission, while the FMCW radar employs frequency-modulated continuous wave technology. Range measurement is a crucial aspect of radar systems, providing information about the distance to a target. The IF amplifier plays a key role in signal processing, amplifying intermediate frequency signals for further analysis. The FMCW altimeter utilizes frequency-modulated continuous wave technology to accurately measure altitude above a reference point.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.