This document discusses speed control methods for AC induction motors. It describes several methods including pole changing, stator frequency variation, stator voltage variation using a slip ring induction motor, and rotor resistance variation. It also mentions slip power recovery schemes and basic inverter circuits for variable voltage frequency control. The document provides introductions and explanations of these various speed control techniques for AC induction motors.
Electric Drives and Controls Unit 1 IntroductionDr.Raja R
Electric Drives and Controls
Unit 1 Introduction
Block Diagram of Electric Drive
Power Source
Power Modulator
Load
Control Unit
Sensing Unit
Motor
Classification of Electrical Drives
Advantages of Electrical Drives
Disadvantages of Electrical Drive
Applications of Electrical Drives
Breaking,Types of Electrical Braking system, Regenerative Braking, Plugging ...Waqas Afzal
Why Breaking?
Requirements for Braking
Types of Electrical Braking system
Regenerative Braking.
Plugging type braking.
Dynamic braking.
Breaking implementations at DC Motor and AC Motor
Nowadays, it is very important to maintain voltage level. Controlling of that voltage is also important. This Presentation contains methods of voltage control.
Torque Production & Control of Speed in Synchronous Motor.
Speed of synchronous motors can be controlled using two methods called open loop and close loop control.
Open loop contol is the simplest scalar control method where motor speed is controlled by independent frequency control of the converter.
In case of close loop self control mode, instead of controlling the inverter frequency independentaly, the frequency and the phase of the output waveform are controlled by an absolute position encoder mounted on the machine shaft giving an account of position of the rotor.
Electric Drives and Controls Unit 1 IntroductionDr.Raja R
Electric Drives and Controls
Unit 1 Introduction
Block Diagram of Electric Drive
Power Source
Power Modulator
Load
Control Unit
Sensing Unit
Motor
Classification of Electrical Drives
Advantages of Electrical Drives
Disadvantages of Electrical Drive
Applications of Electrical Drives
Breaking,Types of Electrical Braking system, Regenerative Braking, Plugging ...Waqas Afzal
Why Breaking?
Requirements for Braking
Types of Electrical Braking system
Regenerative Braking.
Plugging type braking.
Dynamic braking.
Breaking implementations at DC Motor and AC Motor
Nowadays, it is very important to maintain voltage level. Controlling of that voltage is also important. This Presentation contains methods of voltage control.
Torque Production & Control of Speed in Synchronous Motor.
Speed of synchronous motors can be controlled using two methods called open loop and close loop control.
Open loop contol is the simplest scalar control method where motor speed is controlled by independent frequency control of the converter.
In case of close loop self control mode, instead of controlling the inverter frequency independentaly, the frequency and the phase of the output waveform are controlled by an absolute position encoder mounted on the machine shaft giving an account of position of the rotor.
Electrical drives are integral part of industrial and automation processes, particularly where precise control of speed of the motor is the prime requirement. In addition, all modern electric trains or locomotive systems have been powered by electrical drives. Robotics is another major area where adjustable speed drives offer precise speed and position control.
Everywhere DC motors are used in large applications, the use of drives are very necessary for the smooth running and operating of these motors. The DC motor drives are used mainly for good speed regulation, frequent starting, braking and reversing.
A reluctance motor is a type of electric motor that induces non-permanent magnetic poles on the ferromagnetic rotor. The rotor does not have any windings. It generates torque through magnetic reluctance.
Reluctance motor sub types include synchronous, variable, switched and variable stepping.
Reluctance motors can deliver high power density at low cost, making them attractive for many applications. Disadvantages include high torque ripple (the difference between maximum and minimum torque during one revolution) when operated at low speed, and noise due to torque ripple.
Robotics deals with the design, construction, operation, and use of robots, as well as computer systems for their control, sensory feedback, and information processing. These technologies are used to develop machines that can substitute for humans and replicate human actions
Electrical drives are integral part of industrial and automation processes, particularly where precise control of speed of the motor is the prime requirement. In addition, all modern electric trains or locomotive systems have been powered by electrical drives. Robotics is another major area where adjustable speed drives offer precise speed and position control.
Everywhere DC motors are used in large applications, the use of drives are very necessary for the smooth running and operating of these motors. The DC motor drives are used mainly for good speed regulation, frequent starting, braking and reversing.
A reluctance motor is a type of electric motor that induces non-permanent magnetic poles on the ferromagnetic rotor. The rotor does not have any windings. It generates torque through magnetic reluctance.
Reluctance motor sub types include synchronous, variable, switched and variable stepping.
Reluctance motors can deliver high power density at low cost, making them attractive for many applications. Disadvantages include high torque ripple (the difference between maximum and minimum torque during one revolution) when operated at low speed, and noise due to torque ripple.
Robotics deals with the design, construction, operation, and use of robots, as well as computer systems for their control, sensory feedback, and information processing. These technologies are used to develop machines that can substitute for humans and replicate human actions
Electrical drive unit 1 as per IP university_EEEamrutapattnaik2
it is the complete Electrical Drive syllabus of the unit1. i 've tried a lot to merge everything in one PPT.it might be helpful for final year students.
i am also thankful to slideshare as I also collected all data and notes from this site too.
kindly share your suggestions for the improvement
Electrical AC & DC Drives in Control of Electrical DrivesHardik Ranipa
content
Introduction:
ELECTRIC DRIVES - A DEFINITION
Block diagram of Electrical drive:
Components in electric drives
DC drives classification in various types
Single-Phase Half-Wave-Converter Drives:
Three-phase drives
Ac motor drives
Introduction: AC Motor Drives
Stator Voltage Control:
Rotor Voltage Control:
Frequency Control:
DC DRIVES Vs AC DRIVES
Conclusion:
Thank u......
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
2. UNIT-I INTRODUCTION
UNIT-II SPEED CONTROL OF DC MACHINES
UNIT-III SPEED CONTROL OF AC MACHINES
UNIT-IV MOTOR STARTERS AND CONTROLLERS
UNIT-V HEATING AND POWER RATING OF DRIVE
MOTORS
3.
4. Fundamentals of electric drives
Advances of electric drive
Characteristics of loads
Different types of mechanical loads
Choice of an electric drive
Control circuit components: Fuses,
switches
Circuit breakers
Contactors, Relay
Control transformers
5. INTRODUCTION TO ELECTRIC DRIVES
Electrical Drives
Drives are systems employed for motion control
Require prime movers
Drives that employ electric motors as
prime movers are known as Electrical Drives
Electric Drives and Control 5
6. INTRODUCTION TO ELECTRIC DRIVES
Electrical Drives
• About 50% of electrical energy used for drives
• Can be either used for fixed speed or variable speed
• 75% - constant speed, 25% variable speed (expanding)
Electric Drives and Control 6
7. Example on VSD application
motor pump
valve
Supply
Constant speed Variable Speed Drives
Power
In
Power loss
Mainly in valve
Power out
INTRODUCTION TO ELECTRIC DRIVES
Electric Drives and Control 7
8. Example on VSD application
motor pump
valve
Supply
motor
PEC pump
Supply
Constant speed Variable Speed Drives
Power
In
Power loss
Power out
INTRODUCTION TO ELECTRIC DRIVES
Power loss
Mainly in valve
Power out
Power
In
Electric Drives and Control 8
9. INTRODUCTION TO ELECTRIC DRIVES
Conventional electric drives (variable speed)
• Bulky
• Inefficient
• inflexible
Electric Drives and Control 9
10.
11. Electrical Motors
AC motor (Synchronous or Asynchronous motor)
DC Motor (DC shunt, DC series, DC compound motor)
Power Modulators
Rectifier (AC-DC)
Inverters (DC-AC)
Choppers or DC-DC Converters
Cycloconverters
Sources
DC Source
AC Source
Control Unit
12. INTRODUCTION TO ELECTRIC DRIVES
Advantages of electric drives
• Flexible control characteristics
• Compact in size
• Automatic fault detection system
• Available in wide range of speed, torque and power
• It can operate in all the four quadrants of speed – torque plane
• Control gear required for speed control, starting and braking is
usually simple and easy to operate
Electric Drives and Control 12
13. INTRODUCTION TO ELECTRIC DRIVES
Classification of electric drives
Group Drive
• Single motor which drives one or more line shafts
supported on bearings.
• The line shafts may be fitted with either pulleys and belts
or gears Also called as shaft drive
Advantages
• Single large motor can be used instead of a no.of motors
• Normally induction type motor used, can thus work at
about full load, increasing the efficiency
Disadvantages
• No flexibility .If fault occurs, whole process will come to
stop.
• Addition of extra machine to the main shaft is difficult
Electric Drives and Control 13
14. INTRODUCTION TO ELECTRIC DRIVES
Classification of electric drives
Individual Drive
• Each individual machine is driven by a separate motor.
• Example: Lathes (Three phase squirrel cage type im is used)
• Also called as shaft drive
Advantages
• Easy to control each machine
Disadvantages
• Energy transmitted to different parts of the same
mechanism by means of parts like gears, pulleys, etc.
Hence, these occurs some power loss
Electric Drives and Control 14
15. INTRODUCTION TO ELECTRIC DRIVES
Classification of electric drives
Multimotor Drive
• Several drives, each of which serves to actuate one of the
working parts of the driven mechanism
• Example: Complicated metal cutting machine tools, Crane
Advantages
• Suitable for heavy loads
Disadvantages
• Difficult to control the speed.
Electric Drives and Control 15
16. Selection of DC or AC drives
Electric Drives and Control 16
DC Drives
AC Drives
(particularly Induction Motor)
Motor • requires maintenance
• heavy, expensive
• limited speed (due to mechanical
construction)
• less maintenance
• light, cheaper
• high speeds achievable (squirrel-
cage IM)
• robust
Control Unit Simple & cheap control even for high
performance drives
• decoupled torque and flux control
• Possible implementation using
single analog circuit
Depends on required drive performance
• complexity & costs increase with
performance
• DSPs or fast processors required in
high performance drives
Performance Fast torque and flux control Scalar control – satisfactory in some
applications
Vector control – similar to DC drives
18. 2. TORQUE PROPORTIONAL TO SPEED
Eg: Calendaring machines, DC generator connected
with resistive load, eddy current brakes.
19. 3. TORQUE PROPORTIONAL TO SQUARE OF THE
SPEED
Eg: Fans, rotary pumps, compressors and ship
propellers
20. 4. TORQUE INVERSELY PROPORTIONAL TO SPEED
Eg: Lathes, boring machines, milling machines,
steel mill coiler and electric traction load.
21. Choice (or) Selection of electric drives
1. Steady state operation requirements
• Nature of speed-torque characteristics, speed regulation,
speed range, efficiency, duty cycle, quadrants of operation,
speed fluctuations
2. Transient operation requirements
• Values of acceleration & deceleration, starting, braking and
reversing performance.
Electric Drives and Control 21
22. 3. Requirements related to the source
• Type of source, magnitude of voltage, voltage fluctuations, power factor, harmonics
4. Capital and running cost, maintenance needs, life
5. Space and weight restrictions
6. Environment and location
7. Reliability
23.
24. Introduction of speed control of DC motors
DC shunt motors- Speed Torque
characterisitics
Ward Leonard method
DC series motor, series parallel control
Solid state DC drives
Thyristor based bridge rectifier circuits
Chopper circuits
25. Types of DC Motors
Based on the connections of armature and field
windings DC motors classified in to three types they
are
Separately excited DC motor [Field and armature
windings are excited separately by independent
sources]
Shunt excited DC motor [field winding and armature
winding are connected in parallel and are excited by a
common source]
Series excited DC motor [field winding and armature
winding are connected in series and are excited by a
common source]
26. Three types of speed control available for a
DC motor
1. Armature Voltage control
Reducing the armature voltage V of the motor reduces the
motor speed.
2. Field flux control
Reducing Field voltage reduces the flux, and the motor speed
increases.
3. Armature resistance control
When the resistance is inserted in the armature circuit, the
speed drop increases and the motor speed decreases.
27. (i) Torque and Armature current characteristic (Ta/Ia)
It is the curve between armature torque Ta and armature
current Ia of a d.c. motor. It is also known as electrical
characteristic of the motor.
(ii) Speed and armature current characteristic (N/ia)
It is the curve between speed N and armature current Ia of
a d.c. motor. It is very important characteristic as it is
often the deciding factor in the selection of the motor for a
particular application.
(iii) Speed and torque characteristic (N/Ta)
It is the curve between speed N and armature torque Ta of
a d.c. motor. It is also known as mechanical characteristic.
28. ( )
( )
tan ( )
a
a
a a
N Speed rpm
I Armature current Amps
R Armture resis ce ohm
flux
V I R
N
( )
a
a
T Torque
I Armature current Amps
flux
T I
29. Ta/Ia Characteristic:
◦ Since the motor is operating from a constant
supply voltage, flux f is constant (neglecting
armature reaction).
◦ Hence Ta/Ia characteristic is a straight line passing
through the origin as shown in Fig.
30. N/Ia Characteristic :
◦ The flux f and back e.m.f. Eb in a shunt motor are almost
constant under normal conditions. Therefore, speed of a
shunt motor will remain constant
N/Ta Characteristic
◦ It may be seen that speed falls somewhat as the load
torque increases.
31. Conclusions
Following two important conclusions are drawn
from the above characteristics:
(i) There is slight change in the speed of a
shunt motor from no-load to fullload. Hence,
it is essentially a constant-speed motor.
(ii) The starting torque is not high because Ta µ
Ia.
32. Ta/Ia Characteristic :
This means that starting torque of a d.c. series motor will be
very high as compared to a shunt motor
33. N/Ia Characteristic :
◦ The speed of the motor reduces as Torque increases.
N/Ta Characteristic:
◦ A parabolic curve as shown in figure. It is clear that series motor
develops high torque at low speed and vice-versa.
34. Series Connection (Speed Decreases)
◦ In series connection voltage varies(reduces) but
current remains constant
◦ When two are more dc series motors are connected
in series then the voltage across each motor
decreases, hence motor speed reduces from rated
value.
Parallel Connection (Speed Increases)
• In parallel connection voltage remains(reduces) but
current remains constant
• When two are more dc series motors are connected in
parallel, hence motor speed increases or remains
constant.
35. 1. Single phase half controlled rectifier
2. Single phase full converter
36. The converter operates only in Single
quadrant(Forward motoring or Reverse
motoring)
The converter operates only in the
rectification
36
37.
38. The average output voltage is:
The dc voltage can be varied from Vm/π to
0 by varying α from 0 to π.
(1 cos )
m
dc
V
V
Triggering angle
39. The circuit for a single-phase full converter is
shown below.
The load is assumed to be highly inductive,
so the load current is continuous and ripple
free.
The converter operates in the rectification
and inversion modes.
39
41. Working
Mode 1 (0< <180)
◦ T1 and T2 conduct
◦ Input voltage Vs=+ve
◦ Output voltage Vo=+ve, Current Io= +ve
◦ Power flows from source to load (rectification process)
Mode 2 (180< <180+ )
◦ Output voltage Vo=-ve, Current Io= +ve
◦ Power flows from load to source (Inversion process)
Mode 3 (180< <360)
◦ T3 and T4 conduct.
◦ Input voltage Vs=-ve
◦ Output voltage Vo=+ve, Current Io= +ve
◦ Power flows from source to load (rectification process)
41
42. The average output voltage is:
The dc voltage can be varied from 2Vm/π to
-2Vm/π by varying α from 0 to π.
cos
2
)
(
sin
2
2 m
m
dc
V
t
d
t
V
V
42
48. ECE 442 Power Electronics 48
Q1 and D2 operate
Q1 ON, Vs applied
to the motor
Q1 turned OFF, D2
“free-wheels”
Armature current
decays
49. ECE 442 Power Electronics 49
Q2 and D1 operate
Q2 turned ON,
motor acts as a
generator, and the
armature current
rises
Q2 turned OFF,
motor returns
energy to the
supply via D1 “free-
wheeling”
52. ECE 442 Power Electronics 52
Q1 and Q2 turned ON
Supply voltage
appears across the
motor
Armature current
rises
Q1 and Q2 turned
OFF
Armature current
decays via D3 and D4
53. ECE 442 Power Electronics 53
Q1, Q2, and Q3 turned
OFF
Turn Q4 ON
Armature current rises
and flows through Q4,
D2
Q4 turned OFF, motor
acts as a generator,
returns energy back to
the supply via D1, D2
ia reverses
54. ECE 442 Power Electronics 54
Q3 and Q4 turned ON
Supply voltage
appears in the
reverse direction
across the motor
Armature current
rises and flows in the
reverse direction
Q3 and Q4 turned
OFF
Armature current
decays via D1 and D2
ia
55. ECE 442 Power Electronics 55
Q1, Q3, Q4 turned
OFF
Q2 turned ON
Armature current
rises through Q2 and
D4
Q2 turned OFF
Armature current
falls and returns
energy via D3 and D4
i a
56.
57. Introduction of speed control of Induction motors
Pole changing
Stator Frequency variation
Slip ring induction motor – Stator voltage
variation
Rotor resistance variation
Slip Power recovery scheme
Basic Inverter circuits
Variable voltage frequency control
58. AC motor Drives are used in many industrial and
domestic application, such as in conveyer, lift, mixer,
escalator etc.
There are two type of AC motor Drives :
1. Induction Motor Drives
2. Synchronous Motor Drives
59. Two methods of speed control
1. Stator side control
a. Pole changing control
b. Stator voltage control
c. Stator frequency control
2. Rotor side control
a. Rotor resistance control
60. a. Pole changing control
Series Connection
• Reduces the number of poles in the stator
• Increases the speed
• All the winding groups are connected in series
Parallel Connection
• Increases the number of poles in the stator
• Decreases the speed
• Winding groups are connected in parallel
Ns is syncronous speed [rpm]
p is numbers of poles
f is the supply frequency [Hz]
p
f
Ns
120
61. b. Stator voltage control
The speed of the induction motor is varied by
varying the stator voltage. Here, supply frequency is
constant.
The stator voltage can be controlled by two methods
i. Using auto transformer
ii. Using resistance connected in series with stator
winding
62. i) Using auto transformer
Auto transformer provides variable AC voltage
without change in frequency. This voltage fed to
induction motor and hence speed varies
accordingly.
3 phase
auto
transformer
3
phase
IM
R
Y
B
63. ii) Using resistance connected in series with stator
winding
By varying the primary resistance, the voltage drop across
the motor terminal is reduced.
Reduced voltage is applied to the
motor, hence the speed of the motor
is reduced.
Torque is proportional to square of
its stator voltage 2
T α V
65. Instead of wasting the slip power in the rotor
circuit resistance, a better approach is to convert it
to ac line power and return it back to the line. Two
types of converter provide this approach:
1) Static Kramer Drive - only allows operation at
sub-synchronous speed.
2) Static Scherbius Drive – allows operation above
and below synchronous speed.
69. Introduction
DC motor starter
◦ Voltage sensing relay
◦ Current sensing relay
◦ Time delay relay
AC motor starter
◦ Frequency sensing relay
◦ DOL (Direct Online Starter)
◦ Autotransformer starter
71. To limit the starting current the starters are
used.
At the time of starting the back emf of DC
motor is zero.
Eb=V-IaRa
For 220V Machine, Ra=1ohm then the
starting current will be 220A.
76. Main
coil
energi
zes
Main contactor
(NO) closes
hence motor
starts
When Start
button is
pressed
When motor gains its speed,
corresponding voltage sensing relay
(1AR, 2AR, 3AR) works accordingly
1AR
energizes
when speed
gains
1A (NO)
closes and
cuts the
resistance
Clo
ses
Energiz
es
79. Starting
resistance
can also be
cut off at
specific
intervals of
time by
using time
delay relays
1AR, 2AR, 3AR are
off time delay
relays.
1. Start Button
In
Energized
state
Opens
Before
pressing
start
button
80. Starting
resistance
can also be
cut off at
specific
intervals of
time by
using time
delay relays
1AR, 2AR, 3AR are
off time delay
relays.
1. Start Button
OPENS
CLOSE
S
CLOSE
S
De-
energize
with time
delay
Closes with
time delay
CLOSE
S
Energizes
De-
energize
with time
delay
Closes with
time delay
81.
82.
83.
84. Main contactor
(NO) closes
hence motor
starts
When Start
button is
pressed
Main Coil
Energizes
Resistance
added during
starting
Frequency
sensing relay
-1 energizes
when speed
picks-up
1A contactor
closes &
removes the
resistance
1FR
closes
1A closes Frequency
sensing relay
-2 energizes
when speed
picks-up
2FR
closes
2A closes
2A contactor
closes &
removes the
resistance
87. LOAD DIAGRAM
OVERLOAD CAPACITY
INSULATING MATERIAL
HEATING AND COOLING OF MOTORS
SERVICE CONDITION OF ELECTRIC DRIVE
CONTINUOUS, INTERMITTENT & SHORT TIME DUTY
INDUSTRIAL APPLICATION
88. If there is no cooling in the motor the machine
cannot dissipate the heat to the external
medium. So the temperature in the motor
increases to the high value.
Due to increase in the temperature in the motor,
insulation in the windings get damaged.
89. It should provide a suitable speed-torque
characteristics to drive the load.
When the motor is loaded its final steady-state
temperature must be with in the permissible value
of class of insulation used.
The motor selected should be capable of driving
the load satisfactorily both steady-state and
transient conditions.
If the motor is fully loaded it must not have excess
temperature rise and also capable of with stand
short time overloads.
It should have enough starting torque to accelerate
the motor to the desired speed with time.
90. The right choice of
motor for a given
application can be
found from the
load diagram.
Motor rating must
be > than load
torque
Load diagram of
two types
◦ Static or Steady
state component
◦ Dynamic component
91. Torque(T) vs Time(t) in load
diagram for crane
Time t1-t2 Hoisting of
load (Load is constant ),
hence Torque T remains
constant.
t2-t3 Pulley is blocked
by clutch(No load)
t3-t4 Lowering process(
Load raises and becomes
constant)
Dynamic components of
load (during hoisting &
lowering)
Hoisti
ng
Loweri
ng
No
loa
d
92. max
max
T =Maximum torque of motor
= Instantaneous torque overload capacity of the motor
r
T
T
94. CONDUCTORS
The substances through which electric
current can flow easily are called
conductors.
e.g. Silver, gold, copper, aluminum
etc. Conductors have a large number
of free electrons. Generally metals
have a large number of free electrons,
So all metals are good conductors.
95. The materials which have very high
resistivity i.e. offers a very high resistance
to the flow of electric current. Insulating
materials plays an important part in various
electrical and electronic circuits.
In domestic wiring insulating material
protect us from shock and also prevent
leakage current.
So insulating material offers a wide range
of uses in engineering applications. e.g.
Glass, Mica, dry Air, Bakelite etc.
96. SEMICONDUCTORS
The substances whose resistivity lies
between the resistivity of conductors
and insulators are called
semiconductors. e.g. Germanium,
Silicon, Carbon etc.
97. RESISTIVITY
Resistivity is the resistance between the two opposite faces
of a cube having each side equal to one meter.
Resistivity of
CONDUCTORS 10-8 to 10-3 ohm-m
INSULATORS 1010-20 ohm-m
SEMICONDUCTORS 100-0.5 ohm-m
98. Operating condition : Before selecting an insulating
material for a particular application the selection should be
made on the basis of operating temperature, pressure and
magnitude of voltage and current.
Easy in shaping : Shape and size is also important affect.
Availability of material : The material is easily
available.
Cost : Cost is also a important factor.
99. CLASSIFICATION ON THE BASIS OF OPERATING
TEMPERATURE
CLASS ‘Y’ INSULATION - 90 ºC
CLASS ‘A’ INSULATION - 105 ºC
CLASS ‘E’ INSULATION - 120 ºC
CLASS ‘B’ INSULATION - 130 ºC
CLASS ‘F’ INSULATION - 155 ºC
CLASS ‘H’ INSULATION - 180 ºC
CLASS ‘C’ INSULATION - >180 ºC
100. CLASS ‘Y’ INSULATION
Material if un-impregnated fall in this category with operating
temperature up to 90 ºC. e.g. paper, cardboard, cotton, poly vinyl
chloride etc.
CLASS ‘A’ INSULATION
Insulators of class Y when impregnated fall in class A with
operating temperature of about 105 ºC.
CLASS ‘E’ INSULATION
Insulation of this class has operating temperature of 120 ºC.
Insulators used for enameling of wires fall in this category. e.g.
pvc etc.
101. CLASS ‘B’ INSULATION
Impregnated materials fall in class B insulation category with
operating temperatures of about 130 ºC. e.g. impregnated mica,
asbestos, fiber glass etc.
CLASS ‘F’ INSULATION
Impregnated materials, impregnated or glued with better
varnishes e.g. polyurethane, epoxides etc. fall in this category
with operating temperature of about 155 ºC.
CLASS ‘H’ INSULATION
Insulating materials either impregnated or not, operating at 180 ºC
fall in this category. e.g. fiberglass, mica, asbestos, silicon rubber
etc.
102. CLASS ‘C’ INSULATION
Insulators which have operating temperatures more
than 180 ºC fall in class C insulation category. e.g.
glass, ceramics, polytera fluoro ethylene etc.
103. The following assumptions are made in determining the
variation of temperature rise(motor temperature minus ambient
temperature) with time
The atmosphere possesses an infinity thermal capacity, so
the temperature does not change due to heat received from
motor.
The internal conductivity is infinite and as a result, all parts
in the motor has same temperature.
The motor is homogeneous, i.e the condition for the cooling
are identical at all the points on the surface of the motor.
108. After the disconnecting the motor from
the circuit, the load of the motor has
been decreased, the steady state
temperature rise is not equal to zero.
Motor reaches its steady state
temperature after three to four times of
TH.
TH for squirrel cage self-ventilated
motor lies between 11 to 22 minutes.
TH for wound rotor induction motor lies
between 25 to 90 minutes.
109. Time constant TH does not vary with
load it is determined by the parameters
C and A.
C=G.H and A=S.λ
G=Weight of the active parts of the
machine, kg.
H=Specific heat, cal per kg peroc.
S=cooling surface, m2.
λ=Specific heat dissipation or
emissivity, cal per sec per m2 peroc.
110. Method of average losses
Equivalent current method
Equivalent torque method
Equivalent power method
111. The HP rating of a motor to drive a particular load is selected on the basis of thermal
loading.
Continuous Duty
Selection of motor power rating is simple with load as constant.
kW rating of motor is found using kW rating of load(FAN) is found using
N-Speed (rpm) Q- Volume of air (m3 /sec)
T- Load Torque (kg-m) h- pressure (kg/m2 )
Efficiency Efficiency
975
kW
NT
P
102
kW
Qh
P