Dynamic UPS
•Download as PPT, PDF•
1 like•2,461 views
An UPS provides backup power when main power fails. A dynamic UPS differs from a static UPS in that it uses a flywheel instead of batteries to store energy. It provides near-instantaneous power during interruptions to start generators or safely shut down equipment. It has better transient response than static UPS and can handle heavy loads and fluctuations without interruption, making it suitable for critical applications like data centers, manufacturing processes, and electromagnetic lifting.
Report
Share
Report
Share
Recommended
ups
This document discusses uninterruptible power supplies (UPS). It defines a UPS as a device with an alternate energy source that provides power when the primary source is disrupted. UPS systems protect equipment from multiple power disturbances and offer protection against outages. When selecting a UPS, factors to consider include the power quality needs, required run time without primary power, reliability, noise level, monitoring capabilities, initial and maintenance costs, and warranty.
MCC Motor Control Center 1
Motor control centers (MCCs) are groupings of combination motor starters in a single assembly. MCCs allow for centralized control of multiple motors from a single location. They provide advantages like faster installation, neat appearance, ease of modifications, and generally less space required compared to individual motor starters. Power is typically supplied to MCCs from large AC generators that produce three-phase voltage at utilities standard frequencies like 60Hz in the US.
Protective relay
A relay is a automatic device which senses an abnormal condition of electric circuit and closes its contacts
UPS Working, UPS Types
UPS systems provide backup power to connected electrical loads when main power fails. There are three main types of UPS systems - offline UPS, online UPS, and line-interactive UPS. Offline UPS converts battery power to AC during outages with a 25ms transfer time, while online UPS has zero transfer time by continuously powering loads from batteries. Line-interactive UPS is similar to offline but adds a tap-changing transformer for voltage regulation and lower transients. UPS systems are commonly used in data centers, industries, telecommunications, hospitals, banks, and other critical applications.
UPS (Uninterrupted Power Supply)
This document summarizes UPS (Uninterrupted Power Supply) systems. It defines a UPS as an electrical apparatus that provides emergency backup power when main power fails. It describes the three main types of UPS systems as online, offline, and electronic generators. It lists some common applications of UPS systems like data centers, healthcare, and industries. It outlines key advantages like protecting devices from power issues and providing emergency power, as well as drawbacks like energy use and maintenance costs.
Solar pv -simulation and designing
The document is about simulating and designing a solar PV system. It acknowledges the mentor and consultant who provided guidance. It then provides a brief summary of each section in the table of contents, including introducing the components of the PV system like the solar array, mounting, cabling, tracker and inverter. It discusses grid-connected and standalone PV systems and describes software used to assess annual solar production.
UPS (Uninterruptible Power Supply) on oil and gas industry. pdf
An Uninterruptible Power Supply (UPS) provides backup electrical power when the primary power source fails. It has three main components: a rectifier that converts AC to DC power, batteries that store the energy, and an inverter that converts the stored DC back to AC power. There are two main types of UPS - rotary UPS uses an alternator while static UPS uses solid-state components without rotating parts. A static UPS has four operating modes including normal operation from the main power, backup from batteries if the main fails, switching to a standby power source, and bypass for maintenance. The UPS ensures critical systems have continuous power for processes, safety and data protection.
Floating power plant 25 03-11
Floating power plants (FPPs) are mobile offshore power generation facilities that can be rapidly deployed to supply electricity to areas in need. One of the earliest FPPs was constructed in 1940 in the Philippines and is still operational today in Ecuador. Countries in Southeast Asia and South America have utilized FPPs to address severe power shortages. FPPs are designed to operate like ships on water, generating power while remaining stable without rotational movement as water levels change. Recent FPP developments include diesel, wind, and tidal energy powered models.
Recommended
ups
This document discusses uninterruptible power supplies (UPS). It defines a UPS as a device with an alternate energy source that provides power when the primary source is disrupted. UPS systems protect equipment from multiple power disturbances and offer protection against outages. When selecting a UPS, factors to consider include the power quality needs, required run time without primary power, reliability, noise level, monitoring capabilities, initial and maintenance costs, and warranty.
MCC Motor Control Center 1
Motor control centers (MCCs) are groupings of combination motor starters in a single assembly. MCCs allow for centralized control of multiple motors from a single location. They provide advantages like faster installation, neat appearance, ease of modifications, and generally less space required compared to individual motor starters. Power is typically supplied to MCCs from large AC generators that produce three-phase voltage at utilities standard frequencies like 60Hz in the US.
Protective relay
A relay is a automatic device which senses an abnormal condition of electric circuit and closes its contacts
UPS Working, UPS Types
UPS systems provide backup power to connected electrical loads when main power fails. There are three main types of UPS systems - offline UPS, online UPS, and line-interactive UPS. Offline UPS converts battery power to AC during outages with a 25ms transfer time, while online UPS has zero transfer time by continuously powering loads from batteries. Line-interactive UPS is similar to offline but adds a tap-changing transformer for voltage regulation and lower transients. UPS systems are commonly used in data centers, industries, telecommunications, hospitals, banks, and other critical applications.
UPS (Uninterrupted Power Supply)
This document summarizes UPS (Uninterrupted Power Supply) systems. It defines a UPS as an electrical apparatus that provides emergency backup power when main power fails. It describes the three main types of UPS systems as online, offline, and electronic generators. It lists some common applications of UPS systems like data centers, healthcare, and industries. It outlines key advantages like protecting devices from power issues and providing emergency power, as well as drawbacks like energy use and maintenance costs.
Solar pv -simulation and designing
The document is about simulating and designing a solar PV system. It acknowledges the mentor and consultant who provided guidance. It then provides a brief summary of each section in the table of contents, including introducing the components of the PV system like the solar array, mounting, cabling, tracker and inverter. It discusses grid-connected and standalone PV systems and describes software used to assess annual solar production.
UPS (Uninterruptible Power Supply) on oil and gas industry. pdf
An Uninterruptible Power Supply (UPS) provides backup electrical power when the primary power source fails. It has three main components: a rectifier that converts AC to DC power, batteries that store the energy, and an inverter that converts the stored DC back to AC power. There are two main types of UPS - rotary UPS uses an alternator while static UPS uses solid-state components without rotating parts. A static UPS has four operating modes including normal operation from the main power, backup from batteries if the main fails, switching to a standby power source, and bypass for maintenance. The UPS ensures critical systems have continuous power for processes, safety and data protection.
Floating power plant 25 03-11
Floating power plants (FPPs) are mobile offshore power generation facilities that can be rapidly deployed to supply electricity to areas in need. One of the earliest FPPs was constructed in 1940 in the Philippines and is still operational today in Ecuador. Countries in Southeast Asia and South America have utilized FPPs to address severe power shortages. FPPs are designed to operate like ships on water, generating power while remaining stable without rotational movement as water levels change. Recent FPP developments include diesel, wind, and tidal energy powered models.
Uninterrupted power supply
A sudden loss of power will disrupt most business operations, it is not only total mains failures or
‘blackouts’ which can trigger devastating effects. Many electrical loads, for example computer
systems, are equally susceptible to power sags, brown-outs, black-outs, power spikes and surges,
noise and radio frequency interference, and supply frequency changes.
Such loads are often referred to as ‘critical loads’, partly because their continuous operation is
fundamental to the functioning of the business, and also because they require a more stable and
reliable power source than that generally offered by the utility mains supply in order to guarantee
their correct function.
Critical Load Applications
The numbers and types of load falling into the ‘critical’ category are rapidly expanding as an
ever increasing range of microprocessor-based equipment enters both the industrial and commercial
marketplaces. This is typified by the growth of on-line transaction processing and Ecommerce
where 24 hour trading demands absolute power quality with zero downtime.
Among typical critical loads are:
• Computers – e.g. data processing and control systems.
• Industrial process equipment – e.g. precision manufacturing.
• Medical equipment – e.g. life support and monitoring systems.
• Telecommunications network equipment – e.g. PABX.
• Point of sales (POS) terminals – e.g retailing environment.
• On-line business transactions – e.g. internet shopping.
The effects of an inadequate supply to a critical load can include:
• Cessation of the business process – i.e. a total inability to trade and/or communicate
• data loss or corruption due to software crashing
• Expensive hardware failure including component damage – e.g. due to power sags,
spikes etc.
• Production loss due to incorrect operation of a manufacturing process and possible
production equipment damage
• Inappropriate control system operation
• Lost business due to failed POS or telecommunications equipment
• Possible time penalty paid to repair/reset affected systems
Solar Power Plant Design and PV Syst
This document outlines the features and process for using solar PV system design software. The software was developed by the University of Geneva and can analyze meteorological data, design grid-connected or standalone solar PV systems, import module and inverter data from databases, perform shadow analysis using 3D models, and export results. The document provides step-by-step instructions for importing location details, meteorological data, designing the system orientation and components, accounting for losses, running simulations, and viewing results.
**Lightning Arrester Presentation**
This document summarizes types of lightning arresters, their classification, identification, standard ratings, and service conditions. There are three main types of arresters: expulsion, valve, and gapless metal-oxide. Arresters are classified into four classes based on their nominal discharge current and use: station, intermediate, distribution, and secondary. Arresters must be properly identified and can operate under normal conditions of temperature, radiation, altitude, and frequency, but may require special consideration under abnormal conditions.
Power factor improvement
This document discusses power factor, causes of low power factor, disadvantages of low power factor, and methods for improving power factor. It begins by defining power factor as the ratio of active power to apparent power. Inductive loads like transformers and motors cause low power factors by introducing reactive power. Low power factor results in larger equipment sizes, greater losses, and reduced system capacity. Methods for improving power factor include installing capacitors to offset reactive power and replacing standard motors with high efficiency models. The document concludes with a case study where installing capacitors at a factory's main board improved the average power factor from 0.75 to 0.95.
Tripping and control of impulse generators
The document discusses methods for tripping and controlling impulse generators. A simple method uses a three electrode gap in the first stage, where the central electrode is maintained at a potential between the top and bottom electrodes. Tripping is initiated by applying a pulse to a thyraton, which produces a negative pulse to trigger the three electrode gap. Modern methods instead use a trigatron, which requires a smaller voltage for operation. A trigatron consists of a high voltage sphere, earthed main sphere, and trigger electrode. Tripping is achieved by a pulse causing a spark between the trigger electrode and earthed sphere, inducing a spark across the main gap.
Design solar pv system
To design a solar PV system, you first determine the power consumption demands by calculating the total watt-hours per day needed for loads. You then size the PV modules to meet the total watt-hours by calculating the total watt-peak rating needed and number of modules. Next, you size the inverter to handle the total watts of appliances and size batteries based on total watt-hours used per day and days of autonomy. Finally, you size the solar charge controller based on the total short circuit current of the PV array. An example is provided to demonstrate how to apply these steps to design a system for a house with various appliances.
Design of solar pv system
The document provides steps to design a solar PV system for a home:
1. Calculate energy consumption of appliances to determine total daily load.
2. Size the inverter to be 25-30% larger than the total load to allow for surges.
3. Calculate battery bank size based on total daily load, battery voltage and days of autonomy required.
4. Determine number of solar panels needed by dividing the total daily energy needed by the hours of sunlight per day.
Electrical bus bar and its types
The document discusses different types of electrical bus bar arrangements used in power systems. It defines a bus bar as a conductor that collects electric power from incoming feeders and distributes it to outgoing feeders. The main types discussed are single bus bar, single bus bar with sectionalization, main and transfer bus, double bus double breaker, sectionalized double bus bar, one and a half breaker, ring main, and mesh arrangements. Each has advantages like reliability, flexibility and cost considerations, but also disadvantages related to complexity, maintenance costs, and ability to isolate faults.
Load dispatch center
The load dispatch center monitors and controls the power system to ensure reliable power supply. It collects data using a SCADA system and oversees elements like generators, transformers, and transmission lines. The load dispatch center performs economic and secure operation of the power system, and works to restore power lines after faults. It is responsible for functions like load forecasting, outage monitoring, voltage regulation, load scheduling, and coordination between grids.
Substation protection devices
This presentation discusses the key protection devices used in electrical substations. It introduces current transformers and potential transformers, which reduce current and voltage levels for protection relays. Relays detect faults by measuring currents and voltages. When a fault is detected, relays signal circuit breakers to isolate the faulty component. Other protection devices discussed include lightning arresters, isolators, and surge diverters. The objective of the substation protection system is to isolate only faulty parts of the network while keeping the rest operational.
Electrical Power Distribution Systems Design
Electrical power distribution system essentially is the system that receives power from one or more points of power supply and then distributes it over to different electrical equipment individually.
Electrical maintenance-1
This document provides an overview of electrical maintenance, including definitions, types (preventive, operational, corrective), and examples of tasks. It discusses preventive maintenance strategies like reliability centered maintenance and scheduled inspection/testing of critical components. Specific preventive maintenance techniques are covered for both low and high voltage equipment, including infrared analysis, ultrasound leak detection, transformer oil testing, and polarization index testing. Operational maintenance is defined as care performed by operators during equipment use, while corrective maintenance focuses on repair after breakdown. Modern maintenance software programs are also noted.
Solar Panel Installation And Maintenance PowerPoint Presentation Slides
World is moving towards a sustainable future and renewable energy is playing a vital role in achieving that goal. There are various sources of renewable energy but solar energy is dominant when it comes to meet both industrial and residential energy demand at low cost. This presentation will benefit the manufacturing organization that wants to optimize their energy consumption and electricity bill cost by shifting to solar energy. The presentation includes sections namely energy consumption analysis that will help the firm in defining its current electricity composition by resource, its daily, monthly and annual energy utilization rate, share of electricity demand in current year, energy star rating of current appliances and machineries and monthly electricity bill of the plant. Issues we are currently facing section will highlight the current challenges faced by the manufacturer in terms of machine downtime, energy consumption and Co2 emission. Firm can illustrate various solution along with their cost overview to counter their current challenges with help of Available solutions to counter energy issues section. Solar system overview section will help the firm in providing overview about solar system types and its applications along with system workflow. Permission and regulatory key considerations section will help the manufacturer to describe the essential permission and regulatory key consideration required for solar system installation. Manufacturer can provide detailed specification about the project, it objective and expected outcomes with the help of Project description and specifications section. Manufacturer can ensure the best quality of solar panels, mounting structure and inverter with decision making checklist for solar project section. Estimated cost of solar project section will shed a light on total cost required to install solar system. Implementation schedule will help the firm in illustrating the different stages to install solar system. Maintenance plan and schedule section will help the organization in maintaining the solar panel and inverter health. Manufacturer can portrays the stats of plant capacity per annum and electricity bill saving with impact on performance section. Risk and mitigation strategies section will help the manufacturer in illustrating possible risk that may occur during solar system installation and right measures to overcome them. Company can portray possible challenges that may arise while opting for solar energy and solution to overcome them with the help of barriers and solutions for solar energy application section. Finally, performance tracking dashboard will help the manufacturer in tracking plant electricity consumption, solar production and export to grid. https://bit.ly/2MP2gfF
UPS (Uninterrupted Power Supply) - Power Protection Solution
The document discusses various power problems including power failures, sags, surges, under voltages, over voltages, electrical line noise, switching transients, and harmonic distortion. It describes their causes and effects. It then discusses different ways of solving power problems including generators, automatic voltage regulators (AVRs), and uninterruptible power supplies (UPSs). It focuses on UPS technologies and sizing UPS systems based on equipment loads. The document promotes Powerware UPS systems, describing their advantages such as advanced battery management that doubles battery life.
POWER SYSTEM SIMULATION LAB-1 MANUAL (ELECTRICAL - POWER SYSTEM ENGINEERING )
This document discusses the computation of parameters for single and double circuit transmission lines. It provides the theoretical background on line parameters such as resistance, inductance, capacitance. Formulas are given for calculating inductance and capacitance based on the geometric mean distance and radius for different conductor arrangements including single circuit, three phase symmetrical, asymmetrical transposed lines and double circuit transposed lines. Sample exercises are given to calculate the inductance and capacitance of given transmission line configurations and verify the results using software.
Solar on grid application ppt
An on-grid solar electric system generates solar electricity through solar panels and routes it to the main utility grid. The homeowner lives as if connected to only the grid, except some or all electricity comes from the sun. There are four cases: 1) Only solar energy supplies households during sunny periods. 2) Solar and grid energy are both used on cloudy or rainy days when solar is insufficient. 3) Excess solar energy is routed back to the utility grid. 4) At night, households rely solely on grid energy with no solar available.
induction generator
This document summarizes the principles and operation of an induction generator. It explains that an induction generator operates when the rotor spins faster than synchronous speed, inducing a current in the stator. Reactive power is required from an external capacitor bank to generate a rotating magnetic field. Induction generators are simpler and cheaper than other generators but have lower efficiency and cannot independently regulate voltage levels. Their applications include use in variable-speed wind turbines and dynamic braking systems.
Distribution and Load Sharing of Transformer Automatically by using Microcont...
This document describes a system for automatically distributing load and sharing load between transformers using a microcontroller. The system monitors the load on the main transformer and connects additional transformers in parallel when the load exceeds the rating of the main transformer to prevent overloading. It uses current transformers to sense the load, a microcontroller to compare the load to a threshold and control relays, and relays to connect additional transformers as needed. When the load is heavy, the second transformer connects to help share the extra load, and a third transformer can connect if needed. The system aims to protect transformers from overloading and overheating while providing uninterrupted power by automatically distributing the load across multiple transformers.
Presentation on Power transformer
This presentation provides an overview of power transformers. It discusses that power transformers are static machines that transform power from one circuit to another without changing frequency, and are used between generators and distribution circuits. It then describes the typical power ratings of small, medium, and large power transformers. The main components of power transformers are then outlined, including bushings, the core and winding, conservator tank, breather and silica gel, cooling tubes, tap changer, transformer oil, and Buchholz relay. The functions of these key components are explained at a high level.
Switchgear presentation
This document discusses switchgear, its types and components, as well as maintenance procedures. It begins by defining switchgear and its purposes of controlling, protecting and isolating electrical equipment. It then discusses low voltage and medium voltage switchgear, and lists the basic functions of switchgear as electrical protection, safe isolation from live parts, and local or remote switching. The document goes on to discuss periodic and preventive maintenance of switchgear.
Power electronics & power electronic system
Power electronics involves efficiently converting electrical energy from one form to another using semiconductor devices. It deals with modifying electrical energy on a power level rather than signal level. Power electronic converters can be found wherever electrical energy needs to be modified, ranging from milliwatts to hundreds of megawatts. Power conversion systems can be classified based on their input and output power types, such as AC to DC, DC to AC, DC to DC, and AC to AC conversion.
Led Lighting
This document provides an overview of LED lighting technologies and their advantages over traditional lighting sources. It discusses the basic components and types of LED lights including downlights, panels, floodlights, and portable lights. It also compares LEDs to incandescent, fluorescent, compact fluorescent, and metal halide lights in terms of energy efficiency, lifespan, heat output, and other factors. Guidelines are provided for using specification sheets and focusing on benefits rather than initial costs when recommending LED lighting to customers.
More Related Content
What's hot
Uninterrupted power supply
A sudden loss of power will disrupt most business operations, it is not only total mains failures or
‘blackouts’ which can trigger devastating effects. Many electrical loads, for example computer
systems, are equally susceptible to power sags, brown-outs, black-outs, power spikes and surges,
noise and radio frequency interference, and supply frequency changes.
Such loads are often referred to as ‘critical loads’, partly because their continuous operation is
fundamental to the functioning of the business, and also because they require a more stable and
reliable power source than that generally offered by the utility mains supply in order to guarantee
their correct function.
Critical Load Applications
The numbers and types of load falling into the ‘critical’ category are rapidly expanding as an
ever increasing range of microprocessor-based equipment enters both the industrial and commercial
marketplaces. This is typified by the growth of on-line transaction processing and Ecommerce
where 24 hour trading demands absolute power quality with zero downtime.
Among typical critical loads are:
• Computers – e.g. data processing and control systems.
• Industrial process equipment – e.g. precision manufacturing.
• Medical equipment – e.g. life support and monitoring systems.
• Telecommunications network equipment – e.g. PABX.
• Point of sales (POS) terminals – e.g retailing environment.
• On-line business transactions – e.g. internet shopping.
The effects of an inadequate supply to a critical load can include:
• Cessation of the business process – i.e. a total inability to trade and/or communicate
• data loss or corruption due to software crashing
• Expensive hardware failure including component damage – e.g. due to power sags,
spikes etc.
• Production loss due to incorrect operation of a manufacturing process and possible
production equipment damage
• Inappropriate control system operation
• Lost business due to failed POS or telecommunications equipment
• Possible time penalty paid to repair/reset affected systems
Solar Power Plant Design and PV Syst
This document outlines the features and process for using solar PV system design software. The software was developed by the University of Geneva and can analyze meteorological data, design grid-connected or standalone solar PV systems, import module and inverter data from databases, perform shadow analysis using 3D models, and export results. The document provides step-by-step instructions for importing location details, meteorological data, designing the system orientation and components, accounting for losses, running simulations, and viewing results.
**Lightning Arrester Presentation**
This document summarizes types of lightning arresters, their classification, identification, standard ratings, and service conditions. There are three main types of arresters: expulsion, valve, and gapless metal-oxide. Arresters are classified into four classes based on their nominal discharge current and use: station, intermediate, distribution, and secondary. Arresters must be properly identified and can operate under normal conditions of temperature, radiation, altitude, and frequency, but may require special consideration under abnormal conditions.
Power factor improvement
This document discusses power factor, causes of low power factor, disadvantages of low power factor, and methods for improving power factor. It begins by defining power factor as the ratio of active power to apparent power. Inductive loads like transformers and motors cause low power factors by introducing reactive power. Low power factor results in larger equipment sizes, greater losses, and reduced system capacity. Methods for improving power factor include installing capacitors to offset reactive power and replacing standard motors with high efficiency models. The document concludes with a case study where installing capacitors at a factory's main board improved the average power factor from 0.75 to 0.95.
Tripping and control of impulse generators
The document discusses methods for tripping and controlling impulse generators. A simple method uses a three electrode gap in the first stage, where the central electrode is maintained at a potential between the top and bottom electrodes. Tripping is initiated by applying a pulse to a thyraton, which produces a negative pulse to trigger the three electrode gap. Modern methods instead use a trigatron, which requires a smaller voltage for operation. A trigatron consists of a high voltage sphere, earthed main sphere, and trigger electrode. Tripping is achieved by a pulse causing a spark between the trigger electrode and earthed sphere, inducing a spark across the main gap.
Design solar pv system
To design a solar PV system, you first determine the power consumption demands by calculating the total watt-hours per day needed for loads. You then size the PV modules to meet the total watt-hours by calculating the total watt-peak rating needed and number of modules. Next, you size the inverter to handle the total watts of appliances and size batteries based on total watt-hours used per day and days of autonomy. Finally, you size the solar charge controller based on the total short circuit current of the PV array. An example is provided to demonstrate how to apply these steps to design a system for a house with various appliances.
Design of solar pv system
The document provides steps to design a solar PV system for a home:
1. Calculate energy consumption of appliances to determine total daily load.
2. Size the inverter to be 25-30% larger than the total load to allow for surges.
3. Calculate battery bank size based on total daily load, battery voltage and days of autonomy required.
4. Determine number of solar panels needed by dividing the total daily energy needed by the hours of sunlight per day.
Electrical bus bar and its types
The document discusses different types of electrical bus bar arrangements used in power systems. It defines a bus bar as a conductor that collects electric power from incoming feeders and distributes it to outgoing feeders. The main types discussed are single bus bar, single bus bar with sectionalization, main and transfer bus, double bus double breaker, sectionalized double bus bar, one and a half breaker, ring main, and mesh arrangements. Each has advantages like reliability, flexibility and cost considerations, but also disadvantages related to complexity, maintenance costs, and ability to isolate faults.
Load dispatch center
The load dispatch center monitors and controls the power system to ensure reliable power supply. It collects data using a SCADA system and oversees elements like generators, transformers, and transmission lines. The load dispatch center performs economic and secure operation of the power system, and works to restore power lines after faults. It is responsible for functions like load forecasting, outage monitoring, voltage regulation, load scheduling, and coordination between grids.
Substation protection devices
This presentation discusses the key protection devices used in electrical substations. It introduces current transformers and potential transformers, which reduce current and voltage levels for protection relays. Relays detect faults by measuring currents and voltages. When a fault is detected, relays signal circuit breakers to isolate the faulty component. Other protection devices discussed include lightning arresters, isolators, and surge diverters. The objective of the substation protection system is to isolate only faulty parts of the network while keeping the rest operational.
Electrical Power Distribution Systems Design
Electrical power distribution system essentially is the system that receives power from one or more points of power supply and then distributes it over to different electrical equipment individually.
Electrical maintenance-1
This document provides an overview of electrical maintenance, including definitions, types (preventive, operational, corrective), and examples of tasks. It discusses preventive maintenance strategies like reliability centered maintenance and scheduled inspection/testing of critical components. Specific preventive maintenance techniques are covered for both low and high voltage equipment, including infrared analysis, ultrasound leak detection, transformer oil testing, and polarization index testing. Operational maintenance is defined as care performed by operators during equipment use, while corrective maintenance focuses on repair after breakdown. Modern maintenance software programs are also noted.
Solar Panel Installation And Maintenance PowerPoint Presentation Slides
World is moving towards a sustainable future and renewable energy is playing a vital role in achieving that goal. There are various sources of renewable energy but solar energy is dominant when it comes to meet both industrial and residential energy demand at low cost. This presentation will benefit the manufacturing organization that wants to optimize their energy consumption and electricity bill cost by shifting to solar energy. The presentation includes sections namely energy consumption analysis that will help the firm in defining its current electricity composition by resource, its daily, monthly and annual energy utilization rate, share of electricity demand in current year, energy star rating of current appliances and machineries and monthly electricity bill of the plant. Issues we are currently facing section will highlight the current challenges faced by the manufacturer in terms of machine downtime, energy consumption and Co2 emission. Firm can illustrate various solution along with their cost overview to counter their current challenges with help of Available solutions to counter energy issues section. Solar system overview section will help the firm in providing overview about solar system types and its applications along with system workflow. Permission and regulatory key considerations section will help the manufacturer to describe the essential permission and regulatory key consideration required for solar system installation. Manufacturer can provide detailed specification about the project, it objective and expected outcomes with the help of Project description and specifications section. Manufacturer can ensure the best quality of solar panels, mounting structure and inverter with decision making checklist for solar project section. Estimated cost of solar project section will shed a light on total cost required to install solar system. Implementation schedule will help the firm in illustrating the different stages to install solar system. Maintenance plan and schedule section will help the organization in maintaining the solar panel and inverter health. Manufacturer can portrays the stats of plant capacity per annum and electricity bill saving with impact on performance section. Risk and mitigation strategies section will help the manufacturer in illustrating possible risk that may occur during solar system installation and right measures to overcome them. Company can portray possible challenges that may arise while opting for solar energy and solution to overcome them with the help of barriers and solutions for solar energy application section. Finally, performance tracking dashboard will help the manufacturer in tracking plant electricity consumption, solar production and export to grid. https://bit.ly/2MP2gfF
UPS (Uninterrupted Power Supply) - Power Protection Solution
The document discusses various power problems including power failures, sags, surges, under voltages, over voltages, electrical line noise, switching transients, and harmonic distortion. It describes their causes and effects. It then discusses different ways of solving power problems including generators, automatic voltage regulators (AVRs), and uninterruptible power supplies (UPSs). It focuses on UPS technologies and sizing UPS systems based on equipment loads. The document promotes Powerware UPS systems, describing their advantages such as advanced battery management that doubles battery life.
POWER SYSTEM SIMULATION LAB-1 MANUAL (ELECTRICAL - POWER SYSTEM ENGINEERING )
This document discusses the computation of parameters for single and double circuit transmission lines. It provides the theoretical background on line parameters such as resistance, inductance, capacitance. Formulas are given for calculating inductance and capacitance based on the geometric mean distance and radius for different conductor arrangements including single circuit, three phase symmetrical, asymmetrical transposed lines and double circuit transposed lines. Sample exercises are given to calculate the inductance and capacitance of given transmission line configurations and verify the results using software.
Solar on grid application ppt
An on-grid solar electric system generates solar electricity through solar panels and routes it to the main utility grid. The homeowner lives as if connected to only the grid, except some or all electricity comes from the sun. There are four cases: 1) Only solar energy supplies households during sunny periods. 2) Solar and grid energy are both used on cloudy or rainy days when solar is insufficient. 3) Excess solar energy is routed back to the utility grid. 4) At night, households rely solely on grid energy with no solar available.
induction generator
This document summarizes the principles and operation of an induction generator. It explains that an induction generator operates when the rotor spins faster than synchronous speed, inducing a current in the stator. Reactive power is required from an external capacitor bank to generate a rotating magnetic field. Induction generators are simpler and cheaper than other generators but have lower efficiency and cannot independently regulate voltage levels. Their applications include use in variable-speed wind turbines and dynamic braking systems.
Distribution and Load Sharing of Transformer Automatically by using Microcont...
This document describes a system for automatically distributing load and sharing load between transformers using a microcontroller. The system monitors the load on the main transformer and connects additional transformers in parallel when the load exceeds the rating of the main transformer to prevent overloading. It uses current transformers to sense the load, a microcontroller to compare the load to a threshold and control relays, and relays to connect additional transformers as needed. When the load is heavy, the second transformer connects to help share the extra load, and a third transformer can connect if needed. The system aims to protect transformers from overloading and overheating while providing uninterrupted power by automatically distributing the load across multiple transformers.
Presentation on Power transformer
This presentation provides an overview of power transformers. It discusses that power transformers are static machines that transform power from one circuit to another without changing frequency, and are used between generators and distribution circuits. It then describes the typical power ratings of small, medium, and large power transformers. The main components of power transformers are then outlined, including bushings, the core and winding, conservator tank, breather and silica gel, cooling tubes, tap changer, transformer oil, and Buchholz relay. The functions of these key components are explained at a high level.
Switchgear presentation
This document discusses switchgear, its types and components, as well as maintenance procedures. It begins by defining switchgear and its purposes of controlling, protecting and isolating electrical equipment. It then discusses low voltage and medium voltage switchgear, and lists the basic functions of switchgear as electrical protection, safe isolation from live parts, and local or remote switching. The document goes on to discuss periodic and preventive maintenance of switchgear.
What's hot (20)
Solar Panel Installation And Maintenance PowerPoint Presentation Slides
Solar Panel Installation And Maintenance PowerPoint Presentation Slides
UPS (Uninterrupted Power Supply) - Power Protection Solution
UPS (Uninterrupted Power Supply) - Power Protection Solution
POWER SYSTEM SIMULATION LAB-1 MANUAL (ELECTRICAL - POWER SYSTEM ENGINEERING )
POWER SYSTEM SIMULATION LAB-1 MANUAL (ELECTRICAL - POWER SYSTEM ENGINEERING )
Distribution and Load Sharing of Transformer Automatically by using Microcont...
Distribution and Load Sharing of Transformer Automatically by using Microcont...
Viewers also liked
Power electronics & power electronic system
Power electronics involves efficiently converting electrical energy from one form to another using semiconductor devices. It deals with modifying electrical energy on a power level rather than signal level. Power electronic converters can be found wherever electrical energy needs to be modified, ranging from milliwatts to hundreds of megawatts. Power conversion systems can be classified based on their input and output power types, such as AC to DC, DC to AC, DC to DC, and AC to AC conversion.
Led Lighting
This document provides an overview of LED lighting technologies and their advantages over traditional lighting sources. It discusses the basic components and types of LED lights including downlights, panels, floodlights, and portable lights. It also compares LEDs to incandescent, fluorescent, compact fluorescent, and metal halide lights in terms of energy efficiency, lifespan, heat output, and other factors. Guidelines are provided for using specification sheets and focusing on benefits rather than initial costs when recommending LED lighting to customers.
Nuclear Power Plant
Nuclear power plants and types of nuclear reactors...
Please do comment your suggestions and corrections...
LED PRESENTATION
The document discusses the history and advantages of LED lighting technology. It provides details on the LED chip, Target Solutions' full range of LED products including panel lights, downlights, bulbs, flood lighting, and specialty lighting. The document also presents a case study on the benefits and cost savings of replacing metal halide floodlights with LED floodlights for a building.
Tariff, Wiring and Lighting Systems
A brief description of different types of tariffs is provided here. It also covers the basic concept of Electrical wiring systems and lighting systems. Working of different types of lamp with figures are also included.
Students of APJ Abdul Kalam Technological University (KTU) may find this helpful for their sixth module preparation.
Electric Lamps
Working, construction and features of:
1 Sodium Vapour Lamp
2 Metal Halide Lamp
3 Mercury Vapour Lamp
4 Fluorescent Tube Light
5 Compact Fluorescent Lamp
6 Light Emitting Diode
7 Incandescent Lamp
Battery product knowledge
The document provides information about battery training. It discusses the history and certifications of Atlas BX, a large automotive battery producer in Korea. It then covers various topics related to batteries, including components, types, maintenance, charging, storage, capacity ratings, and frequently asked questions. Safety tips are also provided throughout.
Instrumentation Engineering : Transducers, THE GATE ACADEMY
THE GATE ACADEMY's GATE Correspondence Materials consist of complete GATE syllabus in the form of booklets with theory, solved examples, model tests, formulae and questions in various levels of difficulty in all the topics of the syllabus. The material is designed in such a way that it has proven to be an ideal material in-terms of an accurate and efficient preparation for GATE.
Quick Refresher Guide : is especially developed for the students, for their quick revision of concepts preparing for GATE examination. Also get 1 All India Mock Tests with results including Rank,Percentile,detailed performance analysis and with video solutions
GATE QUESTION BANK : is a topic-wise and subject wise collection of previous year GATE questions ( 2001 – 2013). Also get 1 All India Mock Tests with results including Rank,Percentile,detailed performance analysis and with video solutions
Bangalore Head Office:
THE GATE ACADEMY
# 74, Keshava Krupa(Third floor), 30th Cross,
10th Main, Jayanagar 4th block, Bangalore- 560011
E-Mail: info@thegateacademy.com
Ph: 080-61766222
Maintenance and Troubleshooting of Uninterruptible Power Supply (UPS) Systems...
Supplying reliable electric power for critical systems is an essential part of modern industrial installations. Uninterrupted DC emergency power supply systems are used in various installations ranging from power generating stations to consumer-end substations and various applications such as control power to emergency lighting and small but critical motive loads. AC uninterrupted supply equipment find wide use in critical applications such as control, instrumentation, computer and communication systems as well as other types of installations.
Electrical engineers in any industry or other large facilities in diverse areas such as commercial buildings, transportation systems such as railways, airports etc. are bound to come across AC or DC uninterrupted power supply systems. This manual covers the basic understanding of various options of UPS systems available, the principle of operation and of the main energy source in most of the modern UPS installations, viz., the battery.
MORE INFORMATION: http://www.idc-online.com/content/uninterruptible-power-supply-ups-systems-23?id=146
Power Electronic Devices
The document discusses thyristors (also called SCRs). It describes thyristors as 4-layer 3-junction semiconductor devices that can be turned on by applying a gate current. Once on, the gate loses control and it remains on until the anode current drops below the holding current level. The document summarizes the construction, working principles, static and switching characteristics of thyristors including forward and reverse operation, latching/holding currents, turn on/off times. It also discusses different firing circuits used to trigger thyristors like R, RC, and UJT triggering.
Battery Types and Battery technology
This document discusses various battery technologies including primary and secondary cells. It provides details on dry cells, lead-acid batteries, nickel-cadmium batteries, and fuel cells. The key points are:
- Primary cells cannot be recharged while secondary cells can be recharged by passing current in the opposite direction.
- Dry cells are inexpensive but have a limited shelf life. Lead-acid batteries are rechargeable and commonly used in vehicles. Nickel-cadmium batteries can be recharged hundreds of times.
- Fuel cells directly convert chemical energy to electrical energy and include hydrogen-oxygen and methanol-oxygen types. They do not require recharging and have applications in space, military, and stationary power
Dcs operator training
This document provides an overview of the Delta V distributed control system (DCS) being used. It describes the key components of the Delta V system including the engineering workstation, application workstation, operator workstations, controllers, I/O modules, and typical network schematic. It also summarizes the functions and features of the operator workstation including the buttons, common display elements or "dynamos" like gauges and valves, and the faceplates used for process monitoring and control.
Power electronics note
This document discusses power electronics and provides an overview of key concepts:
1. Power electronics refers to controlling and converting electrical power using power semiconductor devices like SCRs. Main applications include rectification, inversion, DC-DC conversion, and AC-AC conversion.
2. Rectification can be uncontrolled using diodes or controlled using SCRs. Common rectifier configurations include single and three-phase bridge rectifiers. Inversion converts DC to AC using devices like SCRs, IGBTs, and MOSFETs.
3. DC-DC conversion is commonly done using switch-mode power supplies with devices like BJTs and MOSFETs. AC-AC conversion using cycloconverters
Instrumentation and control systems
K is the meter constant used in fluid mechanics. The document discusses differential pressure meters which can measure pressure differences in industrial processes. These meters can be fitted with additional instrumentation to output the pressure readings electronically or pneumatically.
Phase Controlled Rectifiers
Operation of different phase controlled rectifiers...
Please do comment your suggestions and corrections...
Flywheel Energy Storage Systeems
This FES unit describe the working and application of Flywheel energy storage systems. For more details contact sengar.avinash@outlook.com
Electric machine
This document discusses the classification and operation of different types of electrical machines. It begins by classifying electrical machines as either static machines like transformers, or rotating machines like DC and AC machines. Within rotating machines, it further divides them into DC machines like DC generators and motors, and AC machines like asynchronous and synchronous machines. The document then focuses on describing the basic components and working principles of DC generators and DC motors. It explains how DC generators use electromagnetic induction to convert mechanical energy to electrical energy, and how DC motors convert electrical energy back to mechanical energy using the interaction of magnetic and electric fields.
Maintenance and Troubleshooting of Uninterruptible Power Supply (UPS) Systems...
Supplying reliable electric power for critical systems is an essential part of modern industrial installations. Uninterrupted DC emergency power supply systems are used in various installations ranging from power generating stations to consumer-end substations and various applications such as control power to emergency lighting and small but critical motive loads. AC uninterrupted supply equipment find wide use in critical applications such as control, instrumentation, computer and communication systems as well as other types of installations.
Electrical engineers in any industry or other large facilities in diverse areas such as commercial buildings, transportation systems such as railways, airports etc. are bound to come across AC or DC uninterrupted power supply systems. This manual covers the basic understanding of various options of UPS systems available, the principle of operation and of the main energy source in most of the modern UPS installations, viz., the battery.
more information: http://www.idc-online.com/content/uninterruptible-power-supply-ups-systems-23?id=146
80 instrumentation interview questions with answers
In this file, you can ref interview materials for instrumentation such as, instrumentation situational interview, instrumentation behavioral interview, instrumentation phone interview, instrumentation interview thank you letter, instrumentation interview tips …
Top 36 instrumentation interview questions with answers pdf
free pdf download ebook
Uninterruptible Power Supply (UPS)
The Panduit no battery, maintenance-free UPS lowers the risk of downtime, provides lower TCO and features easy integration and remote device management.
Viewers also liked (20)
Instrumentation Engineering : Transducers, THE GATE ACADEMY
Instrumentation Engineering : Transducers, THE GATE ACADEMY
Maintenance and Troubleshooting of Uninterruptible Power Supply (UPS) Systems...
Maintenance and Troubleshooting of Uninterruptible Power Supply (UPS) Systems...
Maintenance and Troubleshooting of Uninterruptible Power Supply (UPS) Systems...
Maintenance and Troubleshooting of Uninterruptible Power Supply (UPS) Systems...
80 instrumentation interview questions with answers
80 instrumentation interview questions with answers
Similar to Dynamic UPS
Uninterrupted power supply
An uninterruptible power supply or uninterruptible power source (UPS) is an electrical apparatus that provides emergency power to a load when the input power source or mains power fails.
UPS
The document discusses uninterruptible power supplies (UPS). It begins with an introduction and overview of UPS systems. It then discusses the need for UPS systems to provide backup power when main power fails and protect against power issues like surges, sags, noise and instability. The document outlines the history of UPS systems and describes the main UPS topologies - standby, line interactive, and online/double conversion. It also covers the typical architecture of UPS systems as either distributed or centralized. The document concludes that UPS systems help keep businesses running by protecting critical systems and data from power issues.
Importance of Uninterruptible Power Supply
The document discusses uninterruptible power supplies (UPS). A UPS acts as a backup power source when main power fails by converting incoming AC power to stored DC power and converting that DC power back to AC for connected devices. It consists of a rectifier, inverter, battery, and transfer switch. UPS systems work by charging batteries from the main power supply and powering loads using inverted battery power when main power cuts out. There are different UPS technologies including offline/standby, line interactive, and online/double conversion systems that vary in complexity and backup capabilities. Common UPS applications are in industries, power plants, and hospitals for equipment requiring continuous, reliable power.
UPS - by Damodaran
UPS provides protection against power outages by supplying power from batteries to critical equipment. It increases reliability and can save work and time. A UPS has components like a battery charger, rectifiers, battery, inverter, and filters. It works by converting incoming AC power to DC to charge the battery, and can convert the battery DC power back to AC to power equipment during an outage. Proper maintenance like ventilation, load control, and battery charging/discharging can extend the life of a UPS.
Uninterruptable power supply
This presentation discusses uninterruptible power supplies (UPS). It begins by defining a UPS as a device that provides battery backup power to critical loads when utility power drops to unacceptable levels, with switchover times of 2-4 milliseconds to prevent disruptions. It then covers power problems UPS addresses like voltage distortions, basic UPS components like rectifiers, batteries, and inverters, power quality provided, topologies of line-interactive and double conversion UPS, and applications in data centers, telecommunications, healthcare, and industries. The conclusion emphasizes UPS's strategic aim of best service and lowest rates through information technology upgrades to meet customer needs.
Uninterruptible power supply
This presentation discusses uninterruptible power supplies (UPS). It begins by defining a UPS as a device that provides backup power when primary power is disrupted. It then covers the basic circuit diagram of a UPS and the three main types: online, offline, and line interactive. The key components of a UPS are also outlined, including converters, batteries, inverters, monitors, and controls. The working principles of UPS systems are then explained, noting how standby, line interactive, and online UPS topologies differ in their level of power protection. The presentation concludes by covering the two main types of UPS waveforms: sine wave and simulated sine wave output.
What is an Uninterruptible Power Supply (UPS)
An uninterruptible power supply (UPS) is an enhanced battery system that activates itself in the event of a power failure and acts as the primary power source until electronic equipment can be safely shut down.
The purpose of a UPS is to maintain consistent power levels and prevent fluctuations that could damage digital or mechanical equipment. All types of UPS systems are designed to maintain consistent power levels and prevent fluctuations that could damage digital or mechanical equipment, but there are different types of designs that provide different levels of protection.
Tags: best uninterruptible power supply, uninterruptible power supply calculator, uninterrupted power supply calculator.
Solar Inverters
An inverter converts direct current (DC) from a solar panel into alternating current (AC) that can power household appliances and be fed into the electric grid. There are different types of inverters - string inverters connect multiple solar panels in series, microinverters convert power from individual panels, and central inverters are large units used for large commercial arrays. Inverters use maximum power point tracking technology to optimize power output from solar panels and may include additional functions like battery charging. Grid-tied inverters synchronize with utility power while off-grid inverters operate independently without grid connection.
The working principle of ups
UPS systems provide backup power to devices when main power fails. They contain four main components: 1) a rectifier that converts AC to DC power, 2) batteries that store energy, 3) an inverter that converts DC back to AC, and 4) a static switch that switches power sources. Proper use and maintenance of UPS systems, such as periodic discharge of batteries, can extend their lifespan and reliability.
Solar ppt
- Hybrid inverters interface both grid power and renewable solar energy to provide uninterrupted 24/7 power supply. When the grid is available, power is drawn directly from it, and solar energy charges the battery. Without grid power, the inverter uses stored battery power or current from solar panels to power loads.
- The system aims to maximize the use of solar energy through intelligent charging strategies and an additional DC output to power small loads directly when solar energy is not fully utilized by the battery. It provides reliable backup power during outages while reducing costs and environmental impact over diesel generators.
SME PPT
Sree Meenakshi Electricals is a leading supplier of power quality and power electronics products in India. It offers products like power factor correction panels, capacitors, UPS systems, and batteries. The company aims to provide high quality, customized solutions and services to satisfy customers in various industries like textiles, food processing, manufacturing and others. It works with several brands and partners to deliver total power solutions.
ups uninterruptable power supply
This document summarizes a student project to design an uninterruptible power supply (UPS) using IGBTs that can provide 500-800W of backup power. A group of two students led by supervisor Mr. Ali Arshad will build the UPS using IGBTs for step-up and step-down voltage control to reduce weight. The UPS will charge batteries from the main power grid and use the batteries to power appliances during power outages, preventing food spoilage and allowing continued device use. The circuit design includes an IGBT-based inverter to convert battery DC to 220V AC for loads.
An ac power supply (ups) circuit
This document discusses uninterruptible power supplies (UPS). A UPS provides emergency backup power when main power fails by converting stored battery power to AC power using inverters. It has two main modes: normal mode where power comes directly from mains and charges the batteries, and backup mode where the inverter converts battery DC power to AC power for loads. UPS systems provide advantages like preventing data loss, emergency power supply, surge protection, maintaining battery life, and power quality refinement for equipment.
UPS Electrical Design and Installation
UPS Electrical Design and Installation by Critical Power Supplies.
Important considerations for the electrical design and installation of UPS systems in mission critical applications.
Where Critical Power applications are concerned, the electrical design and installation of a UPS (uninterruptible power supply) system is crucially important for several reasons.
Firstly, it must work in alignment with installations already on site and not interfere with other electrical
equipment. This is particularly important for industrial and healthcare installations where there may already
be critical equipment (medical and life support, for example) in operation.
It all starts with a site survey.
A pre-installation site survey will reveal details about the scope of the electrical work to be undertaken.
Such information will reveal, for instance, the type of electrical loads, power quality issues, harmonics, whether it is a
high, medium or low voltage installation and electrical distribution set up, including the breaker sizes already on site
and their discrimination.
If you would like more information please contact sales on 0800 978 8988 or email sales@criticalpowersupplies.co.uk
Apc1500 manual scon-724 qqg-r0_en
The document provides instructions for installing, starting up, operating, and maintaining an APC Smart-UPS uninterruptible power supply (UPS). It explains how to unpack, position, and rack mount the UPS, connect equipment and networks to the UPS, start it up, and configure user settings through PowerChute software. It also covers operating the UPS, user-configurable items, storage, maintenance, battery replacement, and basic troubleshooting.
Types of UPS | Benefits of UPS
BCL Power supply, install, maintain and support Uninterruptible Power Supply (UPS), APC UPS and standby battery solutions throughout the UK. We aim to ensure the clients’ UPS systems and standby batteries are in optimum condition, ready to protect should a power outage or power related issue occur.
https://www.bclpower.co.uk/
Inverter doc
An inverter is an electric apparatus that changes direct current (DC) to alternating current (AC). It is not the same thing as an alternator, which converts mechanical energy(e.g. movement) into alternating current.
Direct current is created by devices such as batteries and solar panels. When connected, an inverter allows these devices to provide electric power for small household devices. The inverter does this through a complex process of electrical adjustment. From this process, AC electric power is produced. This form of electricity can be used to power an electric light, a microwave oven, or some other electric machine.
BEEE_seminor-1.pdf
Uninterrupted power supplies (UPS) and switch mode power supplies (SMPS) both provide backup power and voltage regulation. UPS devices provide emergency backup power when main power fails by using batteries. There are two main types of UPS - offline UPS which has a faster changeover time than inverters, and online UPS which remains connected to batteries even when main power is available. SMPS efficiently converts power from a source to a load using a switching regulator. It has stages for input rectification, inversion, output transformation and regulation. Both UPS and SMPS provide advantages like voltage stabilization, surge protection and smaller size, but also have disadvantages such as higher maintenance costs and electromagnetic interference.
Running UPS in Economy Mode To Save Energy
Uniterruptible Power Supply play two important roles as providing quality power supply and also act as power backup solutions. As, importance of datacenter is increasing day by day that is why awareness of the potential to run on-line UPS in a less resilient power mode known as ECO-mode is also growing to reduce running costs.
KRYPTON CONTROL AND SOLUTIONS
Krypton Control & Solutions is an Indian company that manufactures solar products such as solar power houses, solar street lights, solar lanterns, and LED lighting solutions. It aims to provide innovative energy solutions using multiple technologies. The company's vision is to provide quality energy conservation solutions for commercial, industrial, and home applications through technological expertise. It manufactures products like pure sine wave inverters/UPSs, solar charge controllers, and solar power houses with MPPT for off-grid and hybrid applications. The solar power houses can charge batteries from solar panels or the grid to power loads, prioritizing solar power. The company also produces LED street lights and solar lanterns to provide lighting solutions.
Similar to Dynamic UPS (20)
Recently uploaded
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
When it comes to unit testing in the .NET ecosystem, developers have a wide range of options available. Among the most popular choices are NUnit, XUnit, and MSTest. These unit testing frameworks provide essential tools and features to help ensure the quality and reliability of code. However, understanding the differences between these frameworks is crucial for selecting the most suitable one for your projects.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Finale of the Year: Apply for Next One!
Presentation for the event called "Finale of the Year: Apply for Next One!" organized by GDSC PJATK
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Recently uploaded (20)
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Dynamic UPS
- 2. What is UPS… It stands for Uninterrupted Power Supply Comes in action when main power supply fails or power interrupts. Works as backup supply for short duration. Energy stored in batteries are used as a backup supply . Has typical electronic circuit consisting of battery charger and inverters. Provides protection from power surges.
- 5. Cons of Conventional UPS Needs battery for energy storage which requires high maintenance. Have electronic circuit like charger and inverter, so less reliable. Have less power carrying capacity i.e. not suitable for heavy loads. Transient response is not good so it is not suitable for very critical loads. Inverter output is not pure sinusoidal in nature having spikes and flat tops. Not purely uninterrupted, it have interruption of the order of few millisecond.
- 11. Why Dynamic UPS For IT Loads A small interruption in data centers may lead to incur loss of vital network traffic. Fluctuations in power supply may lead to data loss or interruption in important data processing. Improved power factor by dynamic ups reduces overall electricity bill. For Industrial Loads Interruption in supply will cause to cease various utility motors. Material handling on conveyor belts does not allow even a few seconds of interruption. The synchronous motor in this system supplies reactive power to the utility grid correcting the overall power factor of the industry.
- 12. Why Dynamic UPS For Electromagnetic lifting Even a voltage dip of few percent may cause weakening of electromagnet intensity and disengaging of lifted freight. Due to its great transient response, there is very negligible chance of accident to happen. The chance of starting of generator is very high as mechanical stored energy due to continuous running flywheel is required to start. It reduces spikes, surges harmonics, and produces the output in purely sinusoidal wave. Has more electrical components, hence more reliable. Has no batteries, hence least maintenance are required.
- 13. Static UPS vs. Dynamic UPS Static UPS Dynamic UPS
- 16. Industries with Conveyor Belts SECTION-A Power Fails
- 17. Industries with Conveyor Belts SECTION-B Overflow SECTION-B
- 18. Future Scope Dynamic UPS technologies must be implemented to the Lifts which can be used as the replacement with counter weight. It will not only provides the safety but also will provides continuous supply to the lift. It can be implemented to the Battery Bank replacing the battery being used for storage of power for control circuit from Dynamic UPS in power sub stations. In industries, capacitor bank can be replaced to Dynamic UPS Technology for Power Factor correction. Few more industries also have to adapt this technology using which they will able to prevent common industrial accidents
- 19. Thank You