Cu06997 lecture 2_hydrostatics_17-2-2013
•
0 likes•2,808 views
Here are the steps to solve this problem using Pascal's law: 1) Wall AB and CD are both vertical surfaces with an area of 2.44 m x 5 m = 12.2 m^2 Pressure at the bottom is due to a water column of 5 m Pressure = Density x Gravity x Height = 1000 x 10 x 5 = 50,000 N/m^2 Force on wall AB/CD = Pressure x Area = 50,000 x 12.2 = 610,000 N 2) Bottom BC is a horizontal surface with an area of 2.44 x 5 = 12.2 m^2 Pressure due to water above it is the pressure at the bottom = 50,
Report
Share
Report
Share
Download to read offline
![Water
Stagnant In motion
not flowing flowing
u = 0 m/s u > 0 m/s
Hydrostatics Fluid dynamics
Pipes Open channel
[Gesloten leidingen] [Open water]
1](https://image.slidesharecdn.com/cu06997lecture2hydrostatics17-2-2013-130217135243-phpapp01/85/Cu06997-lecture-2_hydrostatics_17-2-2013-1-320.jpg)
![CU06997 Fluid Dynamics
Lecture 2 Hydrostatics [Hydrostatica]
1.1 Pressure (page 3-5) [Druk]
1.2 Pressure measurement (page 5-8)
1.3 Pressure forces on submerged bodies (page 8-11)
[Krachten op voorwerpen onder water]
example 1.1 (a) force on dam
1.4 Flotation (page 14, 15) [Opdrijven]
1](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Cu06997 lecture 6_flow in pipes 1_2013
This document discusses fluid dynamics concepts related to pipe flow, including laminar and turbulent flow. It covers fundamental concepts such as Reynolds number, laminar flow equations for frictional head loss and wall shear stress. Turbulent flow equations are presented for head loss, Darcy-Weisbach, and Colebrook-White transition formula. Local head losses are discussed for sudden pipe enlargement and contraction.
Cu06997 lecture 3_principles_of_flow-17-2-2013
This document provides an overview of fluid dynamics principles including:
1. It classifies flows as steady or unsteady, uniform or non-uniform based on changes over time and distance.
2. It describes fundamental equations like conservation of mass, energy, and momentum. Bernoulli's equation relates pressure, velocity, and elevation.
3. It gives examples of applying these principles like calculating pressure differences in pipes using Bernoulli's equation and assuming no energy losses.
Cu06997 lecture 5_reynolds_and_r
The document discusses hydraulic radius, viscosity, laminar and turbulent flow, Reynolds number, and boundary layers in fluid dynamics. It defines hydraulic radius as the ratio of a pipe or channel's cross-sectional area to its wetted perimeter. It also explores laminar versus turbulent flow and uses the Reynolds number to characterize the transition between these flow regimes based on fluid properties and flow velocities. Finally, it introduces the boundary layer concept to explain the region of fluid that is influenced by solid boundaries.
Cu06997 lecture 9_open channel
This document summarizes key concepts in fluid dynamics related to open channel flow:
1) It describes different types of open channel flow including steady uniform/non-uniform flow and unsteady uniform/non-uniform flow.
2) Common equations for mean flow velocity are presented, including the Chezy and Manning's formulas which relate velocity to hydraulic radius and slope.
3) The concepts of hydraulic radius, roughness coefficients, shear stress, specific energy, and equilibrium/normal depth are defined and their representative equations shown.
Cu06997 lecture 4_answer
1. The flow between points P1 and P2 is steady, non-uniform flow since the water depth changes along the length of the ditch but the discharge is constant.
2. Comparing the total head at P1 and P2 using Bernoulli's equation with an energy loss term shows that there is a 0.3 m energy loss between the two points over a 1500 m length of ditch.
3. The flow is classified as one-dimensional flow since the width and depth of flow are much smaller than the length between P1 and P2.
Cu06997 lecture 2_answer
This document discusses concepts related to forces, densities, and fluid pressures. It defines key terms like force, weight, gravity, density of water and soil. It also discusses concepts like buoyancy, Pascal's law, and calculating fluid pressure. It provides an example problem about calculating forces on walls and bottom of a water tank based on the pressure, density and depth of the water.
Cu06997 exercise5
The document defines the hydraulic radius and Reynolds number, which are important concepts in fluid mechanics. The hydraulic radius is the ratio of the wetted area to the wetted perimeter of a flow channel. The Reynolds number is a dimensionless number that quantifies the ratio of inertial to viscous forces and can be used to characterize different flow regimes, with turbulent flow occurring at a Reynolds number greater than 4000 and laminar flow at less than 2000. It is calculated based on variables like fluid velocity, hydraulic diameter or radius, fluid properties, and temperature.
Cu06997 lecture 7_culvert_2013
This document discusses fluid dynamics concepts related to flow in pipes and closed conduits including turbulent flow, local head losses, and partially full pipes. It then provides equations and explanations for calculating head losses and discharge in culverts under various conditions: with and without upstream/downstream velocities, for submerged culverts, and examples of calculating discharge given water level changes and culvert dimensions. Formulas are given for inlet, friction, and outlet losses as well as calculating total head loss, discharge coefficients, and drawing head and water level lines.
Recommended
Cu06997 lecture 6_flow in pipes 1_2013
This document discusses fluid dynamics concepts related to pipe flow, including laminar and turbulent flow. It covers fundamental concepts such as Reynolds number, laminar flow equations for frictional head loss and wall shear stress. Turbulent flow equations are presented for head loss, Darcy-Weisbach, and Colebrook-White transition formula. Local head losses are discussed for sudden pipe enlargement and contraction.
Cu06997 lecture 3_principles_of_flow-17-2-2013
This document provides an overview of fluid dynamics principles including:
1. It classifies flows as steady or unsteady, uniform or non-uniform based on changes over time and distance.
2. It describes fundamental equations like conservation of mass, energy, and momentum. Bernoulli's equation relates pressure, velocity, and elevation.
3. It gives examples of applying these principles like calculating pressure differences in pipes using Bernoulli's equation and assuming no energy losses.
Cu06997 lecture 5_reynolds_and_r
The document discusses hydraulic radius, viscosity, laminar and turbulent flow, Reynolds number, and boundary layers in fluid dynamics. It defines hydraulic radius as the ratio of a pipe or channel's cross-sectional area to its wetted perimeter. It also explores laminar versus turbulent flow and uses the Reynolds number to characterize the transition between these flow regimes based on fluid properties and flow velocities. Finally, it introduces the boundary layer concept to explain the region of fluid that is influenced by solid boundaries.
Cu06997 lecture 9_open channel
This document summarizes key concepts in fluid dynamics related to open channel flow:
1) It describes different types of open channel flow including steady uniform/non-uniform flow and unsteady uniform/non-uniform flow.
2) Common equations for mean flow velocity are presented, including the Chezy and Manning's formulas which relate velocity to hydraulic radius and slope.
3) The concepts of hydraulic radius, roughness coefficients, shear stress, specific energy, and equilibrium/normal depth are defined and their representative equations shown.
Cu06997 lecture 4_answer
1. The flow between points P1 and P2 is steady, non-uniform flow since the water depth changes along the length of the ditch but the discharge is constant.
2. Comparing the total head at P1 and P2 using Bernoulli's equation with an energy loss term shows that there is a 0.3 m energy loss between the two points over a 1500 m length of ditch.
3. The flow is classified as one-dimensional flow since the width and depth of flow are much smaller than the length between P1 and P2.
Cu06997 lecture 2_answer
This document discusses concepts related to forces, densities, and fluid pressures. It defines key terms like force, weight, gravity, density of water and soil. It also discusses concepts like buoyancy, Pascal's law, and calculating fluid pressure. It provides an example problem about calculating forces on walls and bottom of a water tank based on the pressure, density and depth of the water.
Cu06997 exercise5
The document defines the hydraulic radius and Reynolds number, which are important concepts in fluid mechanics. The hydraulic radius is the ratio of the wetted area to the wetted perimeter of a flow channel. The Reynolds number is a dimensionless number that quantifies the ratio of inertial to viscous forces and can be used to characterize different flow regimes, with turbulent flow occurring at a Reynolds number greater than 4000 and laminar flow at less than 2000. It is calculated based on variables like fluid velocity, hydraulic diameter or radius, fluid properties, and temperature.
Cu06997 lecture 7_culvert_2013
This document discusses fluid dynamics concepts related to flow in pipes and closed conduits including turbulent flow, local head losses, and partially full pipes. It then provides equations and explanations for calculating head losses and discharge in culverts under various conditions: with and without upstream/downstream velocities, for submerged culverts, and examples of calculating discharge given water level changes and culvert dimensions. Formulas are given for inlet, friction, and outlet losses as well as calculating total head loss, discharge coefficients, and drawing head and water level lines.
Cu06997 lecture 12_sediment transport and back water
This document discusses sediment transport in open channels. It describes the different types of sediment transport including rolling, sliding, saltation, suspension, and dissolution. It outlines the three main steps of sediment transport: 1) particles start to move through erosion or scour, 2) particles move horizontally through transport, and 3) deposition or sedimentation where particles settle out of the flow. Key parameters that influence erosion include density, grain size, shape, cohesion, turbulence, and bed slope. Sediment transport occurs when the shear stress of the flowing water exceeds the critical shear stress of the sediment material.
Cu06997 assignment 6 2014_answer
The dimensions of the culvert are calculated to be 3 m x 2 m based on trying different cross-sectional areas. The total head loss is calculated using the given discharge of 3 m3/s, upstream velocity of 1 m/s, and downstream velocity of 0.5 m/s. A cross-section of 3 m x 2 m results in a head loss of 0.45 m, which is less than the maximum allowed head rise of 0.5 m. Sketches are provided showing the elevation of the total head and pressure lines.
Cu06997 lecture 6_exercises
- The document contains examples of calculating head loss and pressure differences in pipes due to changes in diameter or flow rate.
- In example 1, the slope of a pipe needed to be calculated to maintain equilibrium based on a given flow rate, diameter, and friction coefficient.
- Example 2 involves calculating the head loss and pressure difference across a sudden enlargement in pipe diameter.
- Example 3 is similar but calculates values for a sudden contraction in pipe diameter.
Cu06997 lecture 4_bernoulli-17-2-2013
The document discusses principles of fluid dynamics including the application of conservation laws and the energy equation to fluid flows. It covers topics such as Bernoulli's equation, velocity and pressure measurement techniques like Pitot tubes, flow through orifices, open channels, and pipes with head losses. Formulas are presented for flow rate calculation using concepts like velocity head, pressure head, and total head.
Cu06997 lecture 8_sewers
Here are the key steps to solve this problem:
1. Calculate the total flow rate at each manhole:
- P4: Q = Rain + Waste = 66 + 10 = 76 l/s
- P3: Q = Rain + Waste = 225 + 10 = 235 l/s
2. Use continuity equation to calculate flow rates in pipes:
- P4-P3 pipe: Q1 = 76 l/s
- P3-P2 pipe: Q2 = 235 l/s
3. Calculate head losses in each pipe and check if above or below allowable head.
- Use Darcy-Weisbach or Chezy equation based on pipe material and roughness
Cu06997 lecture 10_froude
This document discusses concepts in fluid dynamics including specific energy, critical depth, the Froude number, subcritical and supercritical flow, critical velocity, and hydraulic jumps. It provides equations for calculating critical depth, Froude number, critical velocity, and critical bed slope in open channels. Diagrams show the relationship between total head, water depth, and Froude number below and above critical depth.
Compressible Fluid
1) Compressible flow is when the density of a fluid changes during flow, such as gases. Incompressible flow assumes constant density, such as liquids.
2) Examples of compressible flow include gases through nozzles, compressors, high-speed projectiles and planes, and water hammer.
3) Bernoulli's equation relates pressure, temperature, and specific volume and only applies to steady, incompressible flow without friction losses along a single streamline.
Fluid dynamic
This document discusses fluid dynamics and Bernoulli's equation. It begins by defining different forms of energy in a flowing liquid, including kinetic energy, potential energy, pressure energy, and internal energy. It then derives Bernoulli's equation, which states that the total head of a fluid particle remains constant during steady, incompressible flow. The derivation considers forces acting on a fluid particle and uses conservation of energy. Finally, the document presents the general energy equation for steady fluid flow and the specific equation for incompressible fluids using the concepts of total head, head loss, and hydraulic grade line.
Cu06997 lecture 9-10_exercises
This document provides instructions for two exercises involving calculations for open channel flow. The first exercise is for a channel with a bed slope of 1:2000 over a length of 1000m, asking to calculate velocity, discharge, boundary shear stress, and determine if flow is turbulent or not. The second exercise considers a horizontal channel with a downstream water level of +1m NAP and depth of 0.7m, flow rate of 1.5m3/s, and asks to calculate upstream water level and other parameters using Manning's equation.
A Seminar Topic On Boundary Layer
It includes details about boundary layer and boundary layer separations like history,causes,results,applications,types,equations, etc.It also includes some real life example of boundary layer.
(Part ii)- open channels
This document discusses open channel hydraulics and specific energy. It defines key terms like head, energy, hydraulic grade line, energy line, critical depth, Froude number, specific energy, and gradually varied flow. It explains the concepts of critical depth, alternate depths, and how specific energy relates to critical depth for rectangular and non-rectangular channels. It also discusses surface profiles, backwater curves, types of bed slopes, occurrence of critical depth with changes in bed slope, and the energy equation for gradually varied flow. An example problem is included to demonstrate calculating distance between depths for gradually varied flow.
Fluid Mechanics
This document provides an overview of fluid mechanics concepts covered in lecture 1 of MET 306. Key points include:
- Defining units and dimensions, and examining systems of units like SI and BG. Common fluid properties like density, specific weight, and specific gravity are also defined.
- Exploring the ideal gas law and how gas density relates to pressure and temperature.
- Explaining viscosity, both dynamic and kinematic viscosity.
- Describing surface tension and how it causes liquid surfaces to behave like membranes or skins.
- Providing examples to demonstrate calculations for concepts like specific gravity, gas density, Reynolds number, and determining tube diameter based on surface tension.
Continuity Equation
1. The document discusses the continuity equation, which states that the flow rate of an incompressible fluid is constant at any point in a fluid system with no accumulation.
2. The formula for continuity equation is given as: ρ1A1v1 = ρ2A2v2, where ρ is density, A is cross-sectional area, and v is velocity.
3. Examples of applications include calculating water velocity changes in pipes or rivers of varying diameters, and a sample problem is worked out calculating velocities at different pipe positions.
CE-6451-Fluid_Mechanics.GVK
This document contains a question bank with answers for a fluid mechanics and machineries course. It includes 13 questions and answers about fluid properties, density, viscosity, surface tension, momentum equations, laminar flow, head losses, pumps, and cavitation. The questions are divided into 4 units covering fluid properties, flow through pipes, dimensional analysis, and pumps.
Flows under Pressure in Pipes (Lecture notes 02)
This document discusses fluid flow in pipes under pressure. It presents equations to describe laminar and turbulent flow. For laminar flow, the Hagen-Poiseuille equation gives the relationship between pressure drop and flow rate. For turbulent flow, the velocity profile consists of a thin viscous sublayer near the wall and a fully turbulent center zone. Equations are derived to describe velocity profiles in both the sublayer and center zone based on viscosity and turbulence effects. Pipes are classified as smooth or rough depending on roughness size compared to the sublayer thickness.
A STUDY ON VISCOUS FLOW (With A Special Focus On Boundary Layer And Its Effects)
This document summarizes a study on viscous flow with a focus on boundary layers and their effects. It defines viscosity and describes the boundary layer that forms along a solid surface moving through a fluid. Laminar and turbulent boundary layers are differentiated. The boundary layer equations are presented and used to derive the Navier-Stokes equations that govern viscous fluid flow. Key properties of boundary layers like thickness and velocity profiles are discussed. The interaction of boundary layers and shockwaves is also summarized.
Calculation of Flowrate and Pressure Drop Relationship for Laminar Flow using...
This document discusses the relationships between flow rate, pressure drop, and shear stress for laminar flow in pipes. It provides equations to calculate flow rate from shear stress and pressure drop data. The key relationships are:
1) Pressure drop is directly proportional to flow rate for laminar flow.
2) Shear stress at the wall is related to pressure drop by an equation involving pipe diameter and length.
3) Shear stress decreases linearly from the wall to the center of the pipe in laminar flow.
4) The flow rate can be calculated from experimentally measured shear stress and pressure drop data using integration methods like Simpson's rule.
Viscosity & flow
This document discusses flow measurement techniques. It begins by introducing different types of flow meters including mechanical, inferential, electrical, and other varieties. Key concepts are then explained such as units of flow, measurement principles, Reynolds number, discharge coefficient, and flow coefficient. Specific mechanical flow meters are covered in depth, including the theory and equations for fixed restriction variable head meters and orifice flow meters. Compressible gas flow is also analyzed using concepts such as rational expansion factor and moisture factor.
Cu06997 computation lecture3
The document calculates the difference in pressure between two points in a pipe with different diameters but constant flow rate, assuming no energy loss. It shows that with a diameter of 0.15m the pressure is 3.14m and with a diameter of 0.3m the pressure is 0.2m, giving a pressure difference of 2.94m. It then repeats the calculation with the diameters reversed, giving a pressure difference of -2.94m.
Fluid flow
This presentation contains the Fluid flow chapter of Pharmaceutical engineering. This chapter include the definition of flow of fluid, Reynolds number, Bernollis therom, Manometers, Fluid flow measuring equipment's and applications.
Cu06997 1 basic_calculations_6_2_2012
This course covers 13 fluid dynamics calculations including: 1) discharge from culverts and pipes, 2) dimensions of culverts, channels, and pipes, and 3) forces and buoyancy of submerged structures. Students will learn to calculate flow rates, water levels, hydraulic gradients, dimensions, head losses, and pressures/forces on structures like culverts, weirs, and pipes.
More Related Content
What's hot
Cu06997 lecture 12_sediment transport and back water
This document discusses sediment transport in open channels. It describes the different types of sediment transport including rolling, sliding, saltation, suspension, and dissolution. It outlines the three main steps of sediment transport: 1) particles start to move through erosion or scour, 2) particles move horizontally through transport, and 3) deposition or sedimentation where particles settle out of the flow. Key parameters that influence erosion include density, grain size, shape, cohesion, turbulence, and bed slope. Sediment transport occurs when the shear stress of the flowing water exceeds the critical shear stress of the sediment material.
Cu06997 assignment 6 2014_answer
The dimensions of the culvert are calculated to be 3 m x 2 m based on trying different cross-sectional areas. The total head loss is calculated using the given discharge of 3 m3/s, upstream velocity of 1 m/s, and downstream velocity of 0.5 m/s. A cross-section of 3 m x 2 m results in a head loss of 0.45 m, which is less than the maximum allowed head rise of 0.5 m. Sketches are provided showing the elevation of the total head and pressure lines.
Cu06997 lecture 6_exercises
- The document contains examples of calculating head loss and pressure differences in pipes due to changes in diameter or flow rate.
- In example 1, the slope of a pipe needed to be calculated to maintain equilibrium based on a given flow rate, diameter, and friction coefficient.
- Example 2 involves calculating the head loss and pressure difference across a sudden enlargement in pipe diameter.
- Example 3 is similar but calculates values for a sudden contraction in pipe diameter.
Cu06997 lecture 4_bernoulli-17-2-2013
The document discusses principles of fluid dynamics including the application of conservation laws and the energy equation to fluid flows. It covers topics such as Bernoulli's equation, velocity and pressure measurement techniques like Pitot tubes, flow through orifices, open channels, and pipes with head losses. Formulas are presented for flow rate calculation using concepts like velocity head, pressure head, and total head.
Cu06997 lecture 8_sewers
Here are the key steps to solve this problem:
1. Calculate the total flow rate at each manhole:
- P4: Q = Rain + Waste = 66 + 10 = 76 l/s
- P3: Q = Rain + Waste = 225 + 10 = 235 l/s
2. Use continuity equation to calculate flow rates in pipes:
- P4-P3 pipe: Q1 = 76 l/s
- P3-P2 pipe: Q2 = 235 l/s
3. Calculate head losses in each pipe and check if above or below allowable head.
- Use Darcy-Weisbach or Chezy equation based on pipe material and roughness
Cu06997 lecture 10_froude
This document discusses concepts in fluid dynamics including specific energy, critical depth, the Froude number, subcritical and supercritical flow, critical velocity, and hydraulic jumps. It provides equations for calculating critical depth, Froude number, critical velocity, and critical bed slope in open channels. Diagrams show the relationship between total head, water depth, and Froude number below and above critical depth.
Compressible Fluid
1) Compressible flow is when the density of a fluid changes during flow, such as gases. Incompressible flow assumes constant density, such as liquids.
2) Examples of compressible flow include gases through nozzles, compressors, high-speed projectiles and planes, and water hammer.
3) Bernoulli's equation relates pressure, temperature, and specific volume and only applies to steady, incompressible flow without friction losses along a single streamline.
Fluid dynamic
This document discusses fluid dynamics and Bernoulli's equation. It begins by defining different forms of energy in a flowing liquid, including kinetic energy, potential energy, pressure energy, and internal energy. It then derives Bernoulli's equation, which states that the total head of a fluid particle remains constant during steady, incompressible flow. The derivation considers forces acting on a fluid particle and uses conservation of energy. Finally, the document presents the general energy equation for steady fluid flow and the specific equation for incompressible fluids using the concepts of total head, head loss, and hydraulic grade line.
Cu06997 lecture 9-10_exercises
This document provides instructions for two exercises involving calculations for open channel flow. The first exercise is for a channel with a bed slope of 1:2000 over a length of 1000m, asking to calculate velocity, discharge, boundary shear stress, and determine if flow is turbulent or not. The second exercise considers a horizontal channel with a downstream water level of +1m NAP and depth of 0.7m, flow rate of 1.5m3/s, and asks to calculate upstream water level and other parameters using Manning's equation.
A Seminar Topic On Boundary Layer
It includes details about boundary layer and boundary layer separations like history,causes,results,applications,types,equations, etc.It also includes some real life example of boundary layer.
(Part ii)- open channels
This document discusses open channel hydraulics and specific energy. It defines key terms like head, energy, hydraulic grade line, energy line, critical depth, Froude number, specific energy, and gradually varied flow. It explains the concepts of critical depth, alternate depths, and how specific energy relates to critical depth for rectangular and non-rectangular channels. It also discusses surface profiles, backwater curves, types of bed slopes, occurrence of critical depth with changes in bed slope, and the energy equation for gradually varied flow. An example problem is included to demonstrate calculating distance between depths for gradually varied flow.
Fluid Mechanics
This document provides an overview of fluid mechanics concepts covered in lecture 1 of MET 306. Key points include:
- Defining units and dimensions, and examining systems of units like SI and BG. Common fluid properties like density, specific weight, and specific gravity are also defined.
- Exploring the ideal gas law and how gas density relates to pressure and temperature.
- Explaining viscosity, both dynamic and kinematic viscosity.
- Describing surface tension and how it causes liquid surfaces to behave like membranes or skins.
- Providing examples to demonstrate calculations for concepts like specific gravity, gas density, Reynolds number, and determining tube diameter based on surface tension.
Continuity Equation
1. The document discusses the continuity equation, which states that the flow rate of an incompressible fluid is constant at any point in a fluid system with no accumulation.
2. The formula for continuity equation is given as: ρ1A1v1 = ρ2A2v2, where ρ is density, A is cross-sectional area, and v is velocity.
3. Examples of applications include calculating water velocity changes in pipes or rivers of varying diameters, and a sample problem is worked out calculating velocities at different pipe positions.
CE-6451-Fluid_Mechanics.GVK
This document contains a question bank with answers for a fluid mechanics and machineries course. It includes 13 questions and answers about fluid properties, density, viscosity, surface tension, momentum equations, laminar flow, head losses, pumps, and cavitation. The questions are divided into 4 units covering fluid properties, flow through pipes, dimensional analysis, and pumps.
Flows under Pressure in Pipes (Lecture notes 02)
This document discusses fluid flow in pipes under pressure. It presents equations to describe laminar and turbulent flow. For laminar flow, the Hagen-Poiseuille equation gives the relationship between pressure drop and flow rate. For turbulent flow, the velocity profile consists of a thin viscous sublayer near the wall and a fully turbulent center zone. Equations are derived to describe velocity profiles in both the sublayer and center zone based on viscosity and turbulence effects. Pipes are classified as smooth or rough depending on roughness size compared to the sublayer thickness.
A STUDY ON VISCOUS FLOW (With A Special Focus On Boundary Layer And Its Effects)
This document summarizes a study on viscous flow with a focus on boundary layers and their effects. It defines viscosity and describes the boundary layer that forms along a solid surface moving through a fluid. Laminar and turbulent boundary layers are differentiated. The boundary layer equations are presented and used to derive the Navier-Stokes equations that govern viscous fluid flow. Key properties of boundary layers like thickness and velocity profiles are discussed. The interaction of boundary layers and shockwaves is also summarized.
Calculation of Flowrate and Pressure Drop Relationship for Laminar Flow using...
This document discusses the relationships between flow rate, pressure drop, and shear stress for laminar flow in pipes. It provides equations to calculate flow rate from shear stress and pressure drop data. The key relationships are:
1) Pressure drop is directly proportional to flow rate for laminar flow.
2) Shear stress at the wall is related to pressure drop by an equation involving pipe diameter and length.
3) Shear stress decreases linearly from the wall to the center of the pipe in laminar flow.
4) The flow rate can be calculated from experimentally measured shear stress and pressure drop data using integration methods like Simpson's rule.
Viscosity & flow
This document discusses flow measurement techniques. It begins by introducing different types of flow meters including mechanical, inferential, electrical, and other varieties. Key concepts are then explained such as units of flow, measurement principles, Reynolds number, discharge coefficient, and flow coefficient. Specific mechanical flow meters are covered in depth, including the theory and equations for fixed restriction variable head meters and orifice flow meters. Compressible gas flow is also analyzed using concepts such as rational expansion factor and moisture factor.
Cu06997 computation lecture3
The document calculates the difference in pressure between two points in a pipe with different diameters but constant flow rate, assuming no energy loss. It shows that with a diameter of 0.15m the pressure is 3.14m and with a diameter of 0.3m the pressure is 0.2m, giving a pressure difference of 2.94m. It then repeats the calculation with the diameters reversed, giving a pressure difference of -2.94m.
Fluid flow
This presentation contains the Fluid flow chapter of Pharmaceutical engineering. This chapter include the definition of flow of fluid, Reynolds number, Bernollis therom, Manometers, Fluid flow measuring equipment's and applications.
What's hot (20)
Cu06997 lecture 12_sediment transport and back water
Cu06997 lecture 12_sediment transport and back water
A STUDY ON VISCOUS FLOW (With A Special Focus On Boundary Layer And Its Effects)
A STUDY ON VISCOUS FLOW (With A Special Focus On Boundary Layer And Its Effects)
Calculation of Flowrate and Pressure Drop Relationship for Laminar Flow using...
Calculation of Flowrate and Pressure Drop Relationship for Laminar Flow using...
Viewers also liked
Cu06997 1 basic_calculations_6_2_2012
This course covers 13 fluid dynamics calculations including: 1) discharge from culverts and pipes, 2) dimensions of culverts, channels, and pipes, and 3) forces and buoyancy of submerged structures. Students will learn to calculate flow rates, water levels, hydraulic gradients, dimensions, head losses, and pressures/forces on structures like culverts, weirs, and pipes.
Cu06997 the basics_26052013
This course covers 13 fluid dynamics calculations including:
1) Flow types in pipes and open channels (steady/unsteady, uniform/non-uniform)
2) Discharge calculations for culverts, weirs, and open channels
3) Determining dimensions and flow rates in pipes and channels
4) Calculating forces on structures from water such as pressure, buoyancy, and hydraulic gradients
Computation exam
The document contains questions regarding water flow calculations. For question 1, the calculation shows that the lock gate will turn to the right due to higher pressure from freshwater. Question 2 involves calculations of bed slope, Froude number, weir crest level and checking for free flow conditions in an open channel. Question 3 calculates culvert loss coefficients and upstream water level. Question 4 calculates discharge in a sewer pipe, checks for turbulent flow, and calculates the paved area serviced by the pipe, noting that the design is poor since the sewer will always be full.
14 chapter 5
This summarizes a document discussing Reddin's 3-D model of leadership styles. It begins by introducing Reddin's model which categorizes leadership styles based on combinations of task orientation, relationship orientation, and effectiveness. It then reviews prior research that Reddin's model integrates, such as the Ohio State studies, Blake and Mouton's managerial grid, and various other leadership typologies. The document also discusses how Reddin identified 20 situational elements and derived the eight specific leadership styles from combinations of high and low orientations across the three dimensions.
Diploma Fire Safety Engineering
This one-year diploma program focuses on fire and safety engineering. The curriculum includes courses in communicative English, computer fundamentals, accident prevention, risk management, fire hydraulics, fire loss control, safety in electrical systems, safety in chemical and petrochemical industries, fire prevention and control, and six practical courses. The program is offered through the Employees Health and Safety Institute in Chennai, India.
Employees health safety institute hydrostatics
EHSI is the leading institute in health and safety training and consultancy management in India established by St.John Safety and health Society.
Lecture 4 part ii
The document discusses several theories of accident causation:
1. Petersen's accident theory which extends the human factors theory and adds elements like overload, ergonomic traps, decision to err, and system failures.
2. Epidemiological theory which studies the relationship between environmental factors and accidents, looking at predisposition and situational characteristics.
3. Systems theory which views accidents as resulting from interactions within a system consisting of the host, agent, and environment.
4. Firenzie's systems theory focuses on information gathering, risk assessment, decision making, and task performance, and how stressors can impact these.
5. Bird and Loftus's loss causation theory which
Management Styles
This document discusses and compares three types of management styles: autocratic, democratic, and laissez-faire. For each style, it defines the characteristics, advantages, and disadvantages. The autocratic style concentrates power and decision-making with the manager, allowing for fast decisions but limiting worker input. The democratic style shares power between managers and employees through participation in decisions, improving satisfaction but slowing processes. The laissez-faire style gives workers full autonomy over decisions with minimal manager guidance, allowing freedom but potentially less productivity and effectiveness. In conclusion, the best style depends on factors like the competence of managers and workers.
Accident Causation
This document discusses accident causation and workplace safety. It outlines several accident causation models from simple linear models to complex non-linear models. It also discusses factors that can lead to workplace accidents like lack of training or unsafe conditions. The document notes that accident investigations are important to identify causes and implement corrective actions to reduce risks. Finally, it discusses employees' rights to compensation and benefits for workplace injuries under relevant laws and regulations.
Epidemiology
The epidemiological theory of accident causation views accidents similarly to how epidemiology views disease causation. It holds that accidents can be studied by examining the relationship between environmental factors and accidents, just as epidemiology examines the relationship between environmental factors and disease. The epidemiological theory looks at both predisposition characteristics, such as an individual's susceptibility, and situational characteristics, such as environmental pressures, that can interact to increase the probability of an accident occurring. An example given is an employee who is susceptible to peer pressure being more likely to have an accident if pressured by coworkers to speed up their work.
Safetypassport hydrostatics
The St. John Safety Passport scheme (SSPS) was established in response to the needs identified within industry and has undertaken to develop and extend the safety passport culture across all interested sectors in INDIA. ST.JOHN SAFETY AND HEALTH SOCIETY (SAHS)
Epidemiology by prof. dr. rs mehta for msn students
This document provides an overview of epidemiology and epidemiological studies. It defines epidemiology as the study of disease distribution, determinants, and frequencies in populations. It describes different epidemiological study designs including descriptive, analytical, and interventional studies. It also covers topics such as infectious disease epidemiology, chronic disease epidemiology, disease prevention and control, and investigating and controlling epidemics.
leadership style
This document discusses various leadership styles including behavioral, situational, and contingency approaches. It describes styles such as autocratic, participative, free-rein, Likert's four systems of management, the managerial grid, and Hersey-Blanchard's situational leadership model. It concludes that there is no single best leadership style and that the effective style depends on situational factors like the organization, subordinates' skills, and task requirements.
Leadership processes (Instructional Leadership)
The document discusses various leadership processes such as planning, information and communication, time management, delegation, and management styles. It provides descriptions and examples of different leadership models including the Leadership Process Model and frameworks for planning. The goal is to help readers understand effective leadership processes and how to apply them.
Control of Substances Hazardous to Health
COSHH outlines what constitutes a hazardous substance and the requirements for controlling exposure and protecting health. Hazardous substances include those classified as dangerous to health, substances with occupational exposure limits, biological agents, and dusts above specified concentrations. Excluded are asbestos, lead, radioactive, explosive or flammable substances which have separate regulations. A risk assessment must identify hazardous substances, those at risk, evaluate risks, record findings and review controls. Exposure must be prevented, substituted or controlled through engineering controls, isolation, ventilation, work method changes, PPE, housekeeping and training. Controls must be properly used, maintained, defects reported, and exposure monitored for certain substances. Health surveillance is required for significant exposure or exposure linked to
Chaos1
Chaos theory proposes that seemingly random events may actually arise from deterministic systems and can be predicted. It views organizations as complex systems with nonlinear relationships between variables. Applying chaos theory to organizational crises suggests that: 1) small changes can have large effects; 2) long-term predictions are impossible but short-term are feasible; 3) crises may arise from bifurcation points where outcomes oscillate. Chaos theory provides an alternative lens for analyzing unpredictable crisis events in organizations.
Supervision report
This document discusses several theories of leadership styles and their effectiveness. It describes two dimensions of leadership identified in Ohio State studies: initiating structure, which focuses on tasks, and consideration, which focuses on relationships. The Michigan studies identified similar categories of production-centered and employee-centered leadership. Situational leadership theory posits that leadership depends on the leader, follower, and situation. Different styles identified include directing, coaching, supporting, and delegating. Effectiveness depends on matching the proper style to follower competence and commitment levels.
Instructor Led Training
TTS is an accredited provider of technical training and maintenance optimization services. They offer instructor-led training, eLearning, and consulting services across various industries including power, oil and gas, automotive, manufacturing, and food services. Some of their key services include maintenance optimization, reliability improvement, skills assessments, procedure writing, and staff augmentation. They have extensive experience training on various gas turbines, steam turbines, controls systems, and other industrial equipment.
Viewers also liked (20)
Epidemiology by prof. dr. rs mehta for msn students
Epidemiology by prof. dr. rs mehta for msn students
Similar to Cu06997 lecture 2_hydrostatics_17-2-2013
Fluids static
The document provides an overview of hydrostatics. It defines key properties of liquids like viscosity, bulk modulus, and density. It describes how pressure increases with depth in liquids and defines concepts like gauge pressure, absolute pressure, and pressure head. Archimedes' principle states that the upward force on a submerged object equals the weight of the fluid displaced. Worked examples demonstrate calculating pressure, force, and volume displaced for various hydrostatic situations.
unit 5 Principals of hydraulics.pptx
1. Hydraulics is the science of transmitting force and motion through a confined liquid. Power is transmitted by pushing on a confined liquid, which then transmits the energy equally in all directions.
2. Water pressure in a confined space increases proportionally with depth. A pressure gauge will read higher if placed lower in a water column or reservoir.
3. Frictional losses occur when water flows through hoses or pipes due to the water molecules rubbing against surfaces and each other. This decreases pressure over the length of the hose.
MET 212 Module 2-hydrostatics
The document discusses several key concepts in hydrostatics:
1. It defines fluid pressure and provides an example calculation of pressure on a piston.
2. It explains Pascal's Law that pressure at a point in a fluid is the same in all directions.
3. It describes how pressure decreases with increasing height in a fluid under gravity.
4. It discusses pressure measurement using various devices like manometers and provides example calculations.
Chapter 2S1.pptx
This document provides an overview of fluid statics and pressure measurement. It defines key concepts like pressure, absolute and gauge pressure, and buoyancy. It also gives examples of pressure measurement devices like piezometers, manometers (simple, multi-fluid, and differential), and bourdon gauges. Sample problems demonstrate calculating pressure at various depths and interfaces between fluids, as well as buoyant forces and fractional submersion of objects based on fluid densities. The goal is for students to understand fluid statics, pressure characteristics, and how to measure pressure using different techniques.
Pressure and its Measurement
1. The document discusses various concepts related to fluid mechanics including pressure, Pascal's law, units of pressure, measurement of pressure using manometers, and example problems. It provides definitions and equations for pressure, hydrostatic pressure, Pascal's law, and discusses different types of manometers and pressure gauges for measuring pressure. Example problems are included for calculating pressure under various conditions.
Pressure in still water and gases Experiment No. 3.pdf
The document summarizes an experiment on pressure in still liquids and gases. The objectives were to calibrate an electronic pressure sensor and measure hydrostatic pressure. Key findings include:
1) Hydrostatic pressure depends only on water level, not volume.
2) There was a difference between actual and measured pressures due to sensor inaccuracies.
3) Calibrating the sensor produced a curve showing pressure increases with height.
notes in fluid mechanics
This document discusses fluid mechanics and hydraulics concepts including:
1. Definitions of density, specific gravity, atmospheric pressure, absolute and gauge pressure.
2. Descriptions of viscosity, laminar flow, turbulent flow, continuity equation, and steady vs unsteady flow.
3. Explanations of surface tension, capillarity, hydrostatic pressure, buoyancy, and center of pressure.
4. Discussions of manometers, energy equations, forces on submerged surfaces, and fluid static forces.
Lecture Ch 10
This document summarizes key concepts from Chapter 10 on fluids, including:
1) The three phases of matter, density, pressure in fluids, and atmospheric pressure.
2) Bernoulli's principle relating pressure, velocity, and height in fluid flow, and its applications including lift on airplane wings.
3) Buoyancy and Archimedes' principle relating the buoyant force on an object to the weight of fluid displaced.
Physics 1 salah el-sheikh
The document provides information about physics concepts related to pressure and temperature measurement. It discusses:
- Definitions of pressure, standard pressure units like Pascal and atmospheric pressure in different units.
- Relationship between pressure, density, height of liquid and gravity.
- Conversion between different pressure units.
- Operation of barometers, manometers and gas thermometers to measure pressure and temperature. Barometers use mercury columns, while manometers use liquid columns differentially to measure gas pressures. Gas thermometers use the direct relationship between gas pressure and temperature at constant volume.
Physics 1 salah el-sheikh
The document provides information about physics concepts related to pressure and temperature measurement. It discusses:
- Definitions of pressure, standard pressure units like pascals, and relationships between pressure, force, and area.
- How manometers and barometers can be used to measure gas pressure and atmospheric pressure.
- The relationship between temperature and gas pressure in a constant volume gas thermometer according to Boyle's law.
- Latent heat and heating curves related to phase changes of materials like water.
- Example problems for calculating pressure, heat transfer during phase changes, and using manometers to determine unknown pressures.
Intro fluids
Fluid mechanics concepts including pressure, atmospheric pressure, fluid statics, hydrostatics, and buoyancy are introduced. Pressure increases linearly with depth in static fluids and can produce large forces on surfaces like dams. The pressure at a point depends on the density of the fluid and the depth. Buoyancy forces allow objects to float based on the weight and volume of fluid displaced.
Physics class 9
the chapter is intended mostly for use students of class 9. based on the Selina publishers
Fluid Mechanics - 203PHYS
This document provides information about fluid mechanics, including definitions, concepts, and examples. It begins with definitions of a fluid and common fluids like liquids and gases. It then describes fluid mechanics as the study of fluids at rest or in motion. Key concepts discussed include density, pressure, Pascal's law, buoyancy, and Bernoulli's equation. Examples are provided to demonstrate applications of these principles, such as calculating forces from submerged objects.
S3 Chapter 2 Fluid Pressure
This document discusses fluid pressure and various ways to measure it. It defines pressure as a force per unit area and explains that pressure increases linearly with depth in a static fluid. It also describes how manometers and barometers work to measure pressure differences and atmospheric pressure respectively using the hydrostatic pressure equation. Manometers use columns of liquid like mercury or water, while barometers use a mercury column to directly measure atmospheric pressure at sea level.
Fluid mechanics basics
1. The document provides information about fluid mechanics and machinery. It defines fluids and discusses density, pressure, gauge and absolute pressure, Pascal's principle, buoyancy, fluid flow rates, Bernoulli's equation, and other key concepts.
2. Key equations are presented for pressure, density, flow rate, continuity, Bernoulli's equation, and buoyancy. Examples are given to show how to use the equations to calculate pressure, velocity, flow rate, and tension in cables.
3. The document is intended to present fundamental concepts and equations for fluid mechanics to understand properties of fluids, pressure, flow, and buoyancy.
Hydrostatics pressure
All thanks to Ashurii-sensei ☺. This PowerPoint is an introduction to pressure in solids and fluids. Just the basics (Your welcome).
Fluid mechanics-2014-2b4j5bo
1. The document provides information about fluid mechanics, including definitions of key terms like density, pressure, gauge pressure, absolute pressure, Pascal's principle, buoyancy, flow rate, Bernoulli's equation, and other fluid dynamics concepts.
2. Key definitions include: density is mass per unit volume, pressure is force per unit area, gauge pressure measures pressure differences while absolute pressure includes atmospheric pressure, Pascal's principle states pressure changes are transmitted equally in all directions through a confined fluid.
3. Bernoulli's equation states the total pressure and potential/kinetic energy in a fluid remains constant, so changes in one form result in equal changes to others.
Chapter15 a
The document discusses concepts related to fluids at rest, including:
- Hot air balloons use heated air which is less dense than surrounding air to create an upward buoyant force according to Archimedes' Principle.
- Fluid pressure is directly proportional to depth and density of the fluid, and is independent of container shape or area.
- Buoyant force on an object equals the weight of fluid displaced by the object.
A Important IGCSE Power Point on Pressure.pptx
This document provides information about pressure, including definitions, equations, and examples. It defines pressure as force per unit area (pressure = force/area). It explains that pressure increases with depth below the surface of liquids and can be calculated using the equation pressure = density x gravity x height. Common examples of pressure levels are also given, such as atmospheric pressure at sea level being around 100,000 Pa.
Fluid (8 MAY 2020).pdf
This document discusses fluid mechanics concepts including fluid statics, fluid dynamics, and the equation of continuity. Key points covered include:
- Fluid statics concepts such as density, pressure, buoyancy force.
- Fluid dynamics concepts such as laminar vs turbulent flow and the equation of continuity.
- Ideal fluid flow assumptions including steady, nonviscous, incompressible, and irrotational flow.
- Examples calculating pressure, buoyancy force, fluid flow rates, and more.
Similar to Cu06997 lecture 2_hydrostatics_17-2-2013 (20)
Pressure in still water and gases Experiment No. 3.pdf
Pressure in still water and gases Experiment No. 3.pdf
More from Henk Massink
Cu07821 ppt9 recapitulation
This document discusses water management goals and models for two agricultural areas covering 1000 hectares each. It aims for optimal water levels for farming and nature while preventing water issues. The Sobek model simulates a rainstorm over 96 hours, calculating water levels every 5 minutes for 1 month. Questions address water storage capacities in soil and surface water. Calibration requires precipitation data and variances in water levels. Simulations examine summer and winter conditions under different drainage scenarios and capacities. Maintaining infrastructure is important to ensure proper water discharge and storage.
Cu07821 10management and maintenance2015
Management and maintenance of water systems involves complying with various regulations at the European, national, provincial and local levels. It requires managing surface waters, beds, embankments, structures, water levels and other components. Key instruments used include the "Legger" which establishes the situation and dimensions, the "Peilbesluit" which sets water levels, and the "Keur" which establishes regulations. Maintenance activities include dredging, mowing, reconstructing side structures and embankments, and removing new growth. Maintenance of structures involves removing dredgings and repairing structures as needed.
Cu07821 9 zoning plan2015
The document discusses zoning plans, water assessments, and ledgers related to land development and water management. A zoning plan describes allowed land and building uses, and can regulate details like building heights and distances. Changing a zoning plan's designation requires stakeholder input and can take years. A water assessment analyzes how a zoning change, like converting farmland to urban use, will impact the water system. Ledgers document requirements for waterways regarding location, form, size, and construction, and define management boundaries and protection zones. The case involves stakeholders debating a developer's proposed zoning change, with topics including impacts to the water system and potential problems.
Cu07821 8 weirs
This document discusses different types of weirs used to measure water discharge, including broad crested weirs, thin plate weirs, and Rehbock, Romijn, Cipoletti, circular, and Thomson weirs. Broad crested weirs can be long or short, and influence discharge measurements differently depending on whether water downstream affects flow. Thin plate weirs have a sharp crest and allow measuring the upstream water level where it is streamlined with atmospheric pressure under the nappe. The document also provides a link to a video about a hydrosystem and field trip in Macedonia.
Cu07821 7 culverts new
Culverts are civil engineering structures used to allow water to pass under roads or embankments. There are several types of culverts including round concrete tubes, rectangular precast concrete elements, and metal culverts. Culverts require appropriate foundations depending on the material and site conditions, including shallow foundations, foundations on improved soil, or foundations on wooden or concrete poles. Culvert endings can have various shapes like long front walls, receding wings, or return walls to connect to surrounding terrain.
Cu07821 6 pumping stations_update
The document discusses various types of pumping stations including Archimedean screws, axial pumps, centrifugal pumps, and submerged pumps. It notes key components of centrifugal pumps like impellers, volutes, and casings. It also covers pump installation methods, switching levels, frequency drives, impeller types for different uses, and hydraulic concepts like duty point and head.
Cu07821 5 drainage
1) Darcy's law describes groundwater flow through porous media according to hydraulic conductivity and hydraulic gradient.
2) Factors that influence groundwater levels include precipitation, soil type, and land use. Heavy rainfall or irrigation can cause groundwater levels to rise.
3) The drainage of an agricultural parcel is calculated based on the hydraulic conductivity, horizontal distance from a stream, and vertical distances between the groundwater level and impenetrable layer and stream level.
Cu07821 4 soil
This document discusses the hydrological cycle and soil moisture in the unsaturated zone. It describes:
1) The process of rainfall infiltration and groundwater recharge. Water is stored in the pores of the unsaturated zone below the ground surface.
2) Forces that act on soil moisture in the unsaturated zone, including adsorption, osmotic, and capillary forces. Capillary action causes smaller pores to fill with water before larger pores.
3) The soil moisture curve and Staring series, which relate soil type to water pressure and volume of water stored. Finer textured soils like clay can store more water than coarser soils like sand.
Cu07821 3 precipitation and evapotranspiration
1. The hydrological cycle diagram shows the annual water balance for an area, with 800 mm of precipitation, 350 mm of evapotranspiration, 425 mm of surface runoff, and 475 mm of groundwater recharge.
2. Effective precipitation is defined as the volume of precipitation available for groundwater recharge, and is calculated as total precipitation minus actual evapotranspiration, which depends on crop type.
3. Extreme precipitation events like the 1998 "Westlandbui" storm that dropped 100 mm of rain in 24 hours can cause hundreds of millions of euros in flood damage.
Cu07821 2 help
This document discusses water management strategies in the Netherlands, specifically focusing on optimal water level agreements. It describes how water levels are managed through water level agreement areas, where the surface water level is fixed and uniform. The typical Dutch strategy involves examining the existing water situation and specifying adjustments to achieve an optimal groundwater and surface water regime. It also discusses how to relate crop selection and production to soil type and groundwater classification using HELP tables. Maintaining appropriate water levels is important for preventing flooding, drying out, and salination while supporting agriculture and nature.
Cu07821 1 intro_1415
This document provides information about several rural water management courses, including their course codes and names. It then discusses the organization of one course called "Rural Water Management" including that it has both theory and assignment classes each week. The document outlines the course assignment which is to prepare a water level agreement for a polder in Noord Beveland. It also lists the criteria for marks in the course. The rest of the document covers hydrological cycle concepts and diagrams, reasons for managing water systems, how water systems can be adjusted, key topics covered in the course, and an exercise on simple water level areas.
Research portfolio delta_academy_s2_2014_2015
Every semester the 4 research groups of the Delta Academy offer research possibilities for internships, final thesis and Minor. The document (also in English) shows the assignments for the second semester of study year 2014/2015.
Research portfolio da arc 2014-2015 s1
This document provides a summary of research projects conducted by the Delta Academy Applied Research Centre between September 2014 and January 2015. The research was divided among four main research groups: Aquaculture in Delta Areas, Building with Nature, Water Technology, and Water Safety & Area Development. The projects covered a wide range of topics including algae cultivation, shellfish feeding, bioremediation, coastal ecosystem restoration, wastewater reuse, community resilience, and water management in the Dutch delta region.
Research portfolios1 2013_2014 jan july 2014
Mindert de Vries (mindert.devries@hz.nl)
FEEDING TRIALS OYSTERS
The quality of algal biomass as feed for shellfish is dependent on the cultivation parameters. In order to
determine the effect of algal quality on shellfish growth and condition, feeding trials with oysters using
algae cultivated under different parameters are needed. In cooperation with the algae research a set of
feeding trials will be designed and executed. Growth and condition parameters of the oysters will be
determined. This will give insight in the effect of algal quality on shellfish production parameters.
Research type: experiments (HZ, Vlissingen)
Research level: minor
Vision group1(5)
This document outlines a vision and action plan for sustainable development along the Guadalete river basin in Spain. It discusses objectives in areas like water quality, water quantity, ecosystem management, and economic development. It proposes various measures like improving wastewater treatment, promoting renewable energy, education initiatives, green infrastructure projects, sustainable tourism, and balancing economic and natural resource goals. Stakeholders are grouped according to their priorities and the plan identifies both short and long term actions needed to achieve an integrated approach to river management.
Final presentation spain quattro
This document discusses plans for sustainable management of the Guadelete River basin in southern Spain. It envisions transitioning the region away from traditional agriculture and overdevelopment towards more sustainable practices like aquaculture, eco-tourism, and sustainable agriculture/aquaculture. Specific measures proposed include improving wastewater treatment, promoting sustainable farming techniques, developing rural hotels and tourism activities centered around the river, and restoring abandoned salt marshes to create jobs and biodiversity. Stakeholders like universities, NGOs, and different levels of government would need to cooperate to achieve this sustainable vision for the river basin.
Final presentation group 3
The document outlines a plan to improve the Guadalete river basin in Spain by 2030. The vision is for the river basin to have good water quality, sustainable industries, increased environmental awareness, good management, and a high quality of living. Several objectives are identified, including sustainable development, increasing public awareness, and improving water quality and management. Specific measures and timelines are proposed to achieve these objectives, such as improving wastewater treatment plants, sewage systems, and increasing taxes from industries and tourism to fund improvements. Educational programs for local schools are also described to increase environmental awareness among residents.
More from Henk Massink (20)
Cu06997 lecture 2_hydrostatics_17-2-2013
- 1. Water Stagnant In motion not flowing flowing u = 0 m/s u > 0 m/s Hydrostatics Fluid dynamics Pipes Open channel [Gesloten leidingen] [Open water] 1
- 2. CU06997 Fluid Dynamics Lecture 2 Hydrostatics [Hydrostatica] 1.1 Pressure (page 3-5) [Druk] 1.2 Pressure measurement (page 5-8) 1.3 Pressure forces on submerged bodies (page 8-11) [Krachten op voorwerpen onder water] example 1.1 (a) force on dam 1.4 Flotation (page 14, 15) [Opdrijven] 1
- 3. Newton Force F= m . g F= Force [N] m=Weight [Kg] g=earths gravity = ± 10 [m/s2] Water m = ρ . V [kg/m3] . [m3]=[kg] ρ fresh water =1000 [kg/m3] ρ salt water =1025 [kg/m3] 1
- 4. General pressure / druk Pressure [Pa=N/m2] Force [N] Area on which the force acts [m2] Pressure 𝐹 𝑝= 𝐴 1
- 5. y F g A y [N] 2
- 6. General pressure intensity Pressure [Pa=N/m2] Force [N] Area on which the force acts [m2] Fluid Pressure at a point 𝐹 𝜌∙ 𝑔∙ 𝐴∙ 𝑦 𝑝= = = 𝜌∙ 𝑔∙ 𝑦 𝐴 𝐴 Gauge Pressure / Absolute Pressure 3
- 7. Pressure Head 𝑝 𝑦= [Drukhoogte] 𝜌∙ 𝑔 𝑦 = distance surface to point [m] Pressure [Pa=N/m2] fluid density [Kg/m3] earths gravity = ± 10 [m/s2] [Kg/m3] 3 [Kg/m3]
- 8. Pressure Head in a pipe y Transparent tube Pressure 10.000 N/m2, fresh water, Calculate pressure head 4
- 9. Pressure (p) 10.000 N/m2, fresh water y Transparent tube y 4
- 10. Mano meter 4
- 11. Piezometric Head [Piezometrisch nivo] 𝑧1 + 𝑦1 = 𝑧2 + 𝑦2 = 𝑧3 + 𝑦3 Stagnant, not flowing 𝑦3 Piezometric Head 𝑦2 𝑦1 Surface / water level [druklijn] Horizontal reference line / datum 𝑝 𝑦= =Pressure Head[drukhoogte] [m] 𝜌∙ 𝑔 5 =Potential Head[plaatshoogte] [m]
- 12. Pascal’s law Pascal's law or Pascal's principle states that “a change in the pressure of an enclosed incompressible fluid is conveyed undiminished to every part of the fluid and to the surfaces of its container” [Een druk die wordt uitgeoefend op een vloeistof die zich in een geheel gevuld en gesloten vat bevindt, zal zich onverminderd in alle richtingen voortplanten] 6
- 13. Example Pascal’s law 𝐹 𝑝= = 1 N/m2 𝐴 ??? 6
- 15. Atmospheric and gauge pressure Gauge pressure = absolute pressure - atmospheric pressure Relatieve druk = absolute druk – atmosferische druk • 1 atmosphere = 100 kPa = 100.000 N/m2 • So 1 atm = 10 m freshwater = 10 mwc • 1 bar = 1 atm = 100 kPa • 1 mwc = 10.000 N/m2 = 10 kPa • 10 mwc = 100 kPa = 1 bar = 1 atm • mwc = meter water column [mwk] 6a
- 16. Atmospheric and gauge pressure • Hand = 150 cm2 = 150/10000 =0.015 m2 • So downward force = 0.015 x 100.000 = 1.500 N • According to Pascal, there is also a upward force • Upward force = 0.015 x 100.000 = 1.500 N 6a
- 17. Archimedes’ principle Buoyancy is the upward force that keeps things afloat. The net upward buoyancy force is equal to the magnitude of the weight of fluid displaced by the body. This force enables the object to float or at least seem lighter. 7
- 18. Archimedes’ principle Upward force = weight of fluid displaced by the body 7
- 19. 7
- 20. Exercise buoyancy [Opdrijving] Will buoyancy [opdrijving] occur???? +6 m NAP ground water level +5 m NAP 5m 0,20 m Culvert 3m Empty 0 m NAP ρ concrete=2400 [kg/m3] cross-section ρ soil=1600[kg/m3]
- 21. Exercise Pascal’s law The tank contains fresh water. Width of the tank is 2,44 m. Question 1 Calculate the force on wall AB and CD Question 2 Calculate the force on bottom BC Question 3 Calculate the total weight of the water and compare this water the answer of 2. Explain the difference.