This document discusses activity-based costing and its advantages over traditional costing methods. It covers key concepts such as tracing overhead costs to activities and products using cost drivers, calculating activity and product unit costs, and addressing issues like product cost distortions that can occur when products consume overhead activities in different proportions. The document provides examples of calculating predetermined overhead rates and variances, and assigning costs using multiple cost drivers and activity rates. It explains how activity-based costing can provide more accurate product costing than traditional methods.
Akuntansi Manajemen Edisi 8 oleh Hansen & Mowen Bab 4Dwi Wahyu
Materi Bab 4 Activity Based Product Costing, Akuntansi Manajemen buku Hansen & Mowen Edisi 8. Presentasi powerpoint oleh Gail B. Wright, Professor Emeritus of Accounting, Bryant University
Management AccountingActivity Based Costing vs Absorption Cost.docxinfantsuk
Management Accounting
Activity Based Costing vs Absorption Costing
Table of Contents
Budgeted Profit Statements 1
1.1 Absorption Costing 1
1.2 Activity Based Costing 3
1.3 Comments on the results 5
2.0 Discussion of the statement 6
References 9
0
2
1.0 Budgeted Profit Statements
1.1 Absorption Costing
Traditional absorption costing involves the calculation of product cost, using direct and indirect variable costs and fixed and variable overheads, which are substituted over the complete production. Overhead cost substitution is based upon the process activity that drives the cost. Machine hours and assembly hours are two example activities that influence product development; overheads are allocated based upon the hours consumed in each department.
The following table summarises the activity levels involved in the production process:
Product
Units
Machine (Hours)
Assembly (Hours)
Setups
Orders
Suppliers
XYI
50,000
100,000
350,000
120
8,000
3,000
YZT
40,000
200,000
120,000
200
8,000
4,000
ABW
30,000
120,000
60,000
200
16,000
4,200
Total
120,000
420,000
530,000
520
32,000
11,200
When the cost is allocated to each product, finding each product’s contribution towards overhead provides a clearer picture. The following table summarises the total contributions of the three products.
Total Contribution
Products
Selling Price (£)
(1)
Cost Price (£)
(2)
Contribution (£)
(3)= (1)-(2)
Units
(4)
Total Contribution (5)= (3)x(4)
XYI
45
32
13
50,000
650,000
YZT
95
84
11
40,000
440,000
ABW
73
65
8
30,000
240,000
The absorption rate on which the overhead cost is allocated to the products is also important in making the profit and loss statement. Since this involves two significant activities, the overhead is allocated over these two cost drivers.
· O/H Absorption rate (Machine Hours)
Overheads / machine hours = £504,000 / 420,000 = £1.20/hour
· O/H Absorption rate (Assembly Hours)
Overheads / assembly hours = £437,000 / 530,000 = £0.8245/hour
Based upon absorption rates, the following table summarises the division of overhead costs over the three products.
Machine Hours
Assembly Hours
Products
Hours
(1)
Rate
(2)
Overheads
(3)=(1)*(2)
Hours
(4)
Rate
(5)
Overheads
(6)=(4)*(5)
Total O/H
(7)=(3)+(6)
XYI
100,000
1.20
120,000
350,000
0.8245
288,575
408,575
YZT
200,000
1.20
240,000
120,000
0.8245
98,940
298,940
ABW
120,000
1.20
144,000
60,000
0.8245
49,470
169,470
504,000
436,985
940,985
· Statement of Profit / (Loss)
Using Absorption Costing Method
Revenue
XYI
YZT
ABW
(1) Units
50,000 units
40,000 units
30,000 units
(£)
(£)
(£)
(£)
(2) Sale Price
45
95
73
(3) Cost Price
32
84
65
(4) Contribution (2) – (3)
13
11
8
Total Contribution (4) * (1)
650,000
440,000
240,000
1,330,000
Overheads *
(408,575)
(298,940)
(169,470)
(940,985)
Net Profit
241,425
101,060
46,530
389,015
1.2 Activity Based Costing
The focus of activity based costing is upon departmentalizing overheads cost; this cost can be attributed to th ...
Akuntansi Manajemen Edisi 8 oleh Hansen & Mowen Bab 4Dwi Wahyu
Materi Bab 4 Activity Based Product Costing, Akuntansi Manajemen buku Hansen & Mowen Edisi 8. Presentasi powerpoint oleh Gail B. Wright, Professor Emeritus of Accounting, Bryant University
Management AccountingActivity Based Costing vs Absorption Cost.docxinfantsuk
Management Accounting
Activity Based Costing vs Absorption Costing
Table of Contents
Budgeted Profit Statements 1
1.1 Absorption Costing 1
1.2 Activity Based Costing 3
1.3 Comments on the results 5
2.0 Discussion of the statement 6
References 9
0
2
1.0 Budgeted Profit Statements
1.1 Absorption Costing
Traditional absorption costing involves the calculation of product cost, using direct and indirect variable costs and fixed and variable overheads, which are substituted over the complete production. Overhead cost substitution is based upon the process activity that drives the cost. Machine hours and assembly hours are two example activities that influence product development; overheads are allocated based upon the hours consumed in each department.
The following table summarises the activity levels involved in the production process:
Product
Units
Machine (Hours)
Assembly (Hours)
Setups
Orders
Suppliers
XYI
50,000
100,000
350,000
120
8,000
3,000
YZT
40,000
200,000
120,000
200
8,000
4,000
ABW
30,000
120,000
60,000
200
16,000
4,200
Total
120,000
420,000
530,000
520
32,000
11,200
When the cost is allocated to each product, finding each product’s contribution towards overhead provides a clearer picture. The following table summarises the total contributions of the three products.
Total Contribution
Products
Selling Price (£)
(1)
Cost Price (£)
(2)
Contribution (£)
(3)= (1)-(2)
Units
(4)
Total Contribution (5)= (3)x(4)
XYI
45
32
13
50,000
650,000
YZT
95
84
11
40,000
440,000
ABW
73
65
8
30,000
240,000
The absorption rate on which the overhead cost is allocated to the products is also important in making the profit and loss statement. Since this involves two significant activities, the overhead is allocated over these two cost drivers.
· O/H Absorption rate (Machine Hours)
Overheads / machine hours = £504,000 / 420,000 = £1.20/hour
· O/H Absorption rate (Assembly Hours)
Overheads / assembly hours = £437,000 / 530,000 = £0.8245/hour
Based upon absorption rates, the following table summarises the division of overhead costs over the three products.
Machine Hours
Assembly Hours
Products
Hours
(1)
Rate
(2)
Overheads
(3)=(1)*(2)
Hours
(4)
Rate
(5)
Overheads
(6)=(4)*(5)
Total O/H
(7)=(3)+(6)
XYI
100,000
1.20
120,000
350,000
0.8245
288,575
408,575
YZT
200,000
1.20
240,000
120,000
0.8245
98,940
298,940
ABW
120,000
1.20
144,000
60,000
0.8245
49,470
169,470
504,000
436,985
940,985
· Statement of Profit / (Loss)
Using Absorption Costing Method
Revenue
XYI
YZT
ABW
(1) Units
50,000 units
40,000 units
30,000 units
(£)
(£)
(£)
(£)
(2) Sale Price
45
95
73
(3) Cost Price
32
84
65
(4) Contribution (2) – (3)
13
11
8
Total Contribution (4) * (1)
650,000
440,000
240,000
1,330,000
Overheads *
(408,575)
(298,940)
(169,470)
(940,985)
Net Profit
241,425
101,060
46,530
389,015
1.2 Activity Based Costing
The focus of activity based costing is upon departmentalizing overheads cost; this cost can be attributed to th ...
Konsep Balanced Score Card. Penilaian kinerja dilihat dari 4 perspektif yaitu perspektif keuangan, konsumen, learn and growth dan proses bisnis internal.
Makalah Analisis PT Kereta API Indonesia . membahas analisis strategik dalam perusahaan kereta api, dimana dampak peraturan harga pesawat tidak ada penetapan batas bawah maka kereta api berdampak.
Makalah Analisis PT Kereta API Indonesia . membahas analisis strategik dalam perusahaan kereta api, dimana dampak peraturan harga pesawat tidak ada penetapan batas bawah maka kereta api berdampak.
Dmfi booklet indonesian. isi petisi nya yah jangan lupa klik www.dogmeatfreeindonesia.org
tidak sampai 1 menit isi petisi ini agar indonesia bebas dari daging anjing, anjing layak diperlakukan layak dan lebih baik.
tolong ya teman - teman
Dmfi booklet indonesian. isi petisi nya yah jangan lupa klik www.dogmeatfreeindonesia.org
tidak sampai 1 menit isi petisi ini agar indonesia bebas dari daging anjing, anjing layak diperlakukan layak dan lebih baik.
tolong ya teman - teman
how to sell pi coins on Bitmart crypto exchangeDOT TECH
Yes. Pi network coins can be exchanged but not on bitmart exchange. Because pi network is still in the enclosed mainnet. The only way pioneers are able to trade pi coins is by reselling the pi coins to pi verified merchants.
A verified merchant is someone who buys pi network coins and resell it to exchanges looking forward to hold till mainnet launch.
I will leave the telegram contact of my personal pi merchant to trade with.
@Pi_vendor_247
when will pi network coin be available on crypto exchange.DOT TECH
There is no set date for when Pi coins will enter the market.
However, the developers are working hard to get them released as soon as possible.
Once they are available, users will be able to exchange other cryptocurrencies for Pi coins on designated exchanges.
But for now the only way to sell your pi coins is through verified pi vendor.
Here is the telegram contact of my personal pi vendor
@Pi_vendor_247
NO1 Uk Divorce problem uk all amil baba in karachi,lahore,pakistan talaq ka m...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Introduction to Indian Financial System ()Avanish Goel
The financial system of a country is an important tool for economic development of the country, as it helps in creation of wealth by linking savings with investments.
It facilitates the flow of funds form the households (savers) to business firms (investors) to aid in wealth creation and development of both the parties
Currently pi network is not tradable on binance or any other exchange because we are still in the enclosed mainnet.
Right now the only way to sell pi coins is by trading with a verified merchant.
What is a pi merchant?
A pi merchant is someone verified by pi network team and allowed to barter pi coins for goods and services.
Since pi network is not doing any pre-sale The only way exchanges like binance/huobi or crypto whales can get pi is by buying from miners. And a merchant stands in between the exchanges and the miners.
I will leave the telegram contact of my personal pi merchant. I and my friends has traded more than 6000pi coins successfully
Tele-gram
@Pi_vendor_247
Latino Buying Power - May 2024 Presentation for Latino CaucusDanay Escanaverino
Unlock the potential of Latino Buying Power with this in-depth SlideShare presentation. Explore how the Latino consumer market is transforming the American economy, driven by their significant buying power, entrepreneurial contributions, and growing influence across various sectors.
**Key Sections Covered:**
1. **Economic Impact:** Understand the profound economic impact of Latino consumers on the U.S. economy. Discover how their increasing purchasing power is fueling growth in key industries and contributing to national economic prosperity.
2. **Buying Power:** Dive into detailed analyses of Latino buying power, including its growth trends, key drivers, and projections for the future. Learn how this influential group’s spending habits are shaping market dynamics and creating opportunities for businesses.
3. **Entrepreneurial Contributions:** Explore the entrepreneurial spirit within the Latino community. Examine how Latino-owned businesses are thriving and contributing to job creation, innovation, and economic diversification.
4. **Workforce Statistics:** Gain insights into the role of Latino workers in the American labor market. Review statistics on employment rates, occupational distribution, and the economic contributions of Latino professionals across various industries.
5. **Media Consumption:** Understand the media consumption habits of Latino audiences. Discover their preferences for digital platforms, television, radio, and social media. Learn how these consumption patterns are influencing advertising strategies and media content.
6. **Education:** Examine the educational achievements and challenges within the Latino community. Review statistics on enrollment, graduation rates, and fields of study. Understand the implications of education on economic mobility and workforce readiness.
7. **Home Ownership:** Explore trends in Latino home ownership. Understand the factors driving home buying decisions, the challenges faced by Latino homeowners, and the impact of home ownership on community stability and economic growth.
This SlideShare provides valuable insights for marketers, business owners, policymakers, and anyone interested in the economic influence of the Latino community. By understanding the various facets of Latino buying power, you can effectively engage with this dynamic and growing market segment.
Equip yourself with the knowledge to leverage Latino buying power, tap into their entrepreneurial spirit, and connect with their unique cultural and consumer preferences. Drive your business success by embracing the economic potential of Latino consumers.
**Keywords:** Latino buying power, economic impact, entrepreneurial contributions, workforce statistics, media consumption, education, home ownership, Latino market, Hispanic buying power, Latino purchasing power.
NO1 Uk Rohani Baba In Karachi Bangali Baba Karachi Online Amil Baba WorldWide...Amil baba
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
The European Unemployment Puzzle: implications from population agingGRAPE
We study the link between the evolving age structure of the working population and unemployment. We build a large new Keynesian OLG model with a realistic age structure, labor market frictions, sticky prices, and aggregate shocks. Once calibrated to the European economy, we quantify the extent to which demographic changes over the last three decades have contributed to the decline of the unemployment rate. Our findings yield important implications for the future evolution of unemployment given the anticipated further aging of the working population in Europe. We also quantify the implications for optimal monetary policy: lowering inflation volatility becomes less costly in terms of GDP and unemployment volatility, which hints that optimal monetary policy may be more hawkish in an aging society. Finally, our results also propose a partial reversal of the European-US unemployment puzzle due to the fact that the share of young workers is expected to remain robust in the US.
how to sell pi coins effectively (from 50 - 100k pi)DOT TECH
Anywhere in the world, including Africa, America, and Europe, you can sell Pi Network Coins online and receive cash through online payment options.
Pi has not yet been launched on any exchange because we are currently using the confined Mainnet. The planned launch date for Pi is June 28, 2026.
Reselling to investors who want to hold until the mainnet launch in 2026 is currently the sole way to sell.
Consequently, right now. All you need to do is select the right pi network provider.
Who is a pi merchant?
An individual who buys coins from miners on the pi network and resells them to investors hoping to hang onto them until the mainnet is launched is known as a pi merchant.
debuts.
I'll provide you the Telegram username
@Pi_vendor_247
Poonawalla Fincorp and IndusInd Bank Introduce New Co-Branded Credit Cardnickysharmasucks
The unveiling of the IndusInd Bank Poonawalla Fincorp eLITE RuPay Platinum Credit Card marks a notable milestone in the Indian financial landscape, showcasing a successful partnership between two leading institutions, Poonawalla Fincorp and IndusInd Bank. This co-branded credit card not only offers users a plethora of benefits but also reflects a commitment to innovation and adaptation. With a focus on providing value-driven and customer-centric solutions, this launch represents more than just a new product—it signifies a step towards redefining the banking experience for millions. Promising convenience, rewards, and a touch of luxury in everyday financial transactions, this collaboration aims to cater to the evolving needs of customers and set new standards in the industry.
NO1 Uk Black Magic Specialist Expert In Sahiwal, Okara, Hafizabad, Mandi Bah...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
1. 7755
CHAPTER 4
ACTIVITY-BASED PRODUCT COSTING
QUESTIONS FOR WRITING AND DISCUSSION
1. Unit costs provide essential information
needed for inventory valuation and prepara-
tion of income statements. Knowing unit
costs is also critical for many decisions such
as bidding decisions and accept-or-reject
special order decisions.
2. Cost measurement is determining the dollar
amounts associated with resources used in
production. Cost assignment is associating
the dollar amounts, once measured, with
units produced.
3. An actual overhead rate is rarely used be-
cause of problems with accuracy and timeli-
ness. Waiting until the end of the year to en-
sure accuracy is rejected because of the
need to have timely information. Timeliness
of information based on actual overhead
costs runs into difficulty (accuracy problems)
because overhead is incurred nonuniformly
and because production also may be non-
uniform.
4. For plantwide rates, overhead is first col-
lected in a plantwide pool, using direct trac-
ing. Next, an overhead rate is computed and
used to assign overhead to products.
5. First stage: Overhead is assigned to produc-
tion department pools using direct tracing,
driver tracing, and allocation. Second stage:
Individual departmental rates are used to
assign overhead to products as they pass
through the departments.
6. Departmental rates would be chosen over
plantwide rates whenever some depart-
ments are more overhead intensive than
others and if certain products spend more
time in some departments than they do in
others.
7. Plantwide overhead rates assign overhead
to products in proportion to the amount of
the unit-level cost driver used. If the prod-
ucts consume some overhead activities in
different proportions than those assigned
by the unit-level cost driver, then cost dis-
tortions can occur (the product diversity
factor). These distortions can be significant
if the nonunit-level overhead costs
represent a significant proportion of total
overhead costs.
8. Low-volume products may consume non-
unit-level overhead activities in much greater
proportions than indicated by a unit-level
cost driver and vice versa for high-volume
products. If so, then the low-volume prod-
ucts will receive too little overhead and the
high-volume products too much.
9. If some products are undercosted and oth-
ers are overcosted, a firm can make a num-
ber of competitively bad decisions. For ex-
ample, the firm might select the wrong
product mix or submit distorted bids.
10. Nonunit-level overhead activities are those
overhead activities that are not highly corre-
lated with production volume measures. Ex-
amples include setups, material handling,
and inspection. Nonunit-level cost drivers
are causal factors—factors that explain the
consumption of nonunit-level overhead. Ex-
amples include setup hours, number of
moves, and hours of inspection.
11. Product diversity is present whenever prod-
ucts have different consumption ratios for
different overhead activities.
12. An overhead consumption ratio measures
the proportion of an overhead activity con-
sumed by a product.
13. Departmental rates typically use unit-level
cost drivers. If products consume nonunit-
level overhead activities in different propor-
tions than those of unit-level measures, then
it is possible for departmental rates to move
even further away from the true consump-
tion ratios, since the departmental unit-level
ratios usually differ from the one used at the
plant level.
14. Agree. Prime costs can be assigned using
direct tracing and so do not cause cost dis-
tortions. Overhead costs, however, are not
directly attributable and can cause distor-
tions. For example, using unit-level activity
drivers to trace nonunit-level overhead costs
would cause distortions.
2. 7766
15. Activity-based product costing is an over-
head costing approach that first assigns
costs to activities and then to products. The
assignment is made possible through the
identification of activities, their costs, and the
use of cost drivers.
16. An activity dictionary is a list of activities
accompanied by information that describes
each activity (called attributes)
17. A primary activity is consumed by the final
cost objects such as products and custom-
ers, whereas secondary activities are con-
sumed by other activities (ultimately con-
sumed by primary activities).
18. Costs are assigned using direct tracing and
resource drivers.
19. Unit-level activities are those that occur each
time a product is produced. Batch-level activi-
ties are those that are performed each time a
batch of products is produced. Product-level
or sustaining activities are those that are
performed as needed to support the various
products produced by a company. Facility-
level activities are those that sustain a facto-
ry’s general manufacturing process
20. Rates can be reduced by building a system
that approximates the cost assignments of a
fully specified ABC system. One way to do
this is by using only the most expensive ac-
tivities to assign costs. If the most expensive
activities represent a large percentage of the
total costs, then most of the costs are as-
signed using a cause-and-effect relation-
ship, thus creating a good level of accuracy
while reducing the complexity of the ABC
system.
3. 7777
EXERCISES
4–1
1.
Quarter 1 Quarter 2 Quarter 3 Quarter 4 Total
Units produced 400,000 160,000 80,000 560,000 1,200,000
Prime costs $8,000,000 $3,200,000 $1,600,000 $11,200,000 $24,000,000
Overhead costs $3,200,000 $2,400,000 $3,600,000 $2,800,000 $12,000,000
Unit cost:
Prime $20 $20 $20 $20 $20
Overhead 8 15 45 5 10
Total $28 $35 $65 $25 $30
2. Actual costing can produce wide swings in the overhead cost per unit. The
cause appears to be nonuniform incurrence of overhead and nonuniform
production (seasonal production is a possibility).
3. First, calculate a predetermined rate:
OH rate = $11,640,000/1,200,000
= $9.70 per unit
This rate is used to assign overhead to the product throughout the year.
Since the driver is units produced, $9.70 would be assigned to each unit. Add-
ing this to the actual prime costs produces a unit cost under normal costing:
Unit cost = $9.70 + $20.00 = $29.70
This cost is close to the actual annual cost of $30.00.
4. 7788
4–2
1. $27,000,000/90,000 = $300 per direct labor hour (DLH)
2. $300 × 91,000 = $27,300,000
3. Applied overhead $27,300,000
Actual overhead 27,200,000
Overrapplied overhead $ 100,000
4. Predetermined rates allow the calculation of unit costs and avoid the prob-
lems of nonuniform overhead incurrence and nonuniform production asso-
ciated with actual overhead rates. Unit cost information is needed throughout
the year for a variety of managerial purposes.
4–3
1. Predetermined overhead rate = $4,500,000/600,000 = $7.50 per DLH
2. Applied overhead = $7.50 × 585,000 = $4,387,500
3. Applied overhead $ 4,387,500
Actual overhead 4,466,250
Underapplied overhead $ (78,750)
4. Unit cost:
Prime costs $ 6,750,000
Overhead costs 4,387,500
Total $ 11,137,500
Units ÷ 750,000
Unit cost $ 14.85
5. 7799
4–4
1. Predetermined overhead rate = $4,500,000/187,500 = $24 per machine hour
(MHr)
2. Applied overhead = $24 × 187,875 = $4,509,000
3. Applied overhead $ 4,509,000
Actual overhead 4,466,250
Overapplied overhead $ 42,750
4. Unit cost:
Prime costs $ 6,750,000
Overhead costs 4,509,000
Total $ 11,259,000
Units ÷ 750,000
Unit cost $ 15.01*
*Rounded
5. Gandars needs to determine what causes its overhead. Is it primarily labor
driven (e.g., composed predominantly of fringe benefits, indirect labor, and
personnel costs), or is it machine oriented (e.g., composed of depreciation on
machinery, utilities, and maintenance)? It is impossible for a decision to be
made on the basis of the information given in this exercise.
7. 8811
4–6
1. Activity rates:
Machining = $632,000/300,000
= $2.11* per MHr
Inspection = $360,000/12,000
= $30 per inspection hour
*Rounded
2. Unit overhead cost = [($2.11 × 4,000) + ($30 × 800)]/8,000
= $32,440/8,000
= $4.055
4–7
1.
Scented Cards Regular Cards
Inspection hours 0.20a
0.80a
Setup hours 0.50b
0.50b
Machine hours 0.25c
0.75c
Number of moves 0.75d
0.25d
a. Total inspection hours = 200 (40+160); 40/200 for Scented and 160/200 for Regular
b. Total Setup hours = 100 (50+50); 50/100 for Scented and 50/100 for Regular
c. Total Machine hours = 800 (200+600); 200/800 for Scented and 600/800 for Regular
d. Total Number of moves = 300 (225+75); 225/300 for Scented and 75/300 for Regular
2. The consumption ratios vary significantly from driver to driver. Using, for ex-
ample, only machine hours to assign the overhead may create accuracy prob-
lems. Both setup hours and number of moves have markedly different consump-
tion ratios.
4–8
1. Rates:
Inspecting products: $2,000/200 = $10 per inspection hour
Setting up equipment: $2,500/100 = $25 per setup hour
Machining: $4,000/800 = $5 per machine hour
Moving materials: $900/300 = $3.00 per move
Note: The denominator is the total driver amount (sum of the demand of the two
products).
8. 8822
2.
Rate = Cost/hours
Inspection hours = Cost/Rate = $2,000/$20 = 100 inspection hours
4–9
1.
Normal Intensive
Treating patients:
$4.00 × 5,000 $ 20,000
$4.00 × 20,000 $ 80,000
Providing hygienic care:
$5.00 × 5,000 25,000
$5.00 × 11,000 55,000
Responding to requests:
$2.00 × 30,000 60,000
$2.00 × 50,000 100,000
Monitoring patients:
$0.75 × 20,000 15,000
$0.75 × 180,000 135,000
Cost Assigned $120,000 $370,000
2. Nursing cost per patient day:
Normal Intensive
$120,000/10,000 $12.00
$370,000/8,000 $46.25
4–10
1. Yes. Because direct materials and direct labor are directly traceable to
each product, their cost assignment should be accurate.
2. The consumption ratios for each (using machine hours and setup hours
as the activity drivers) are as follows:
Elegant Fina
Machining 0.10 0.90 (500/5,000 and 4,500/5,000)
Setups 0.50 0.50 (100/200 and 100/200)
3. Elegant: (1.75 × $9,000)/3,000 = $5.25 per briefcase
9. 8833
Fina: (1.75 × $3,000)/3,000 = $1.75 per briefcase
Note: Overhead rate = $21,000/$12,000 = $1.75 per direct labor dollar
(or 175 percent of direct labor cost).
There are more machine and setup costs assigned to Elegant than Fina.
This is clearly a distortion because the production of Fina is automated
and uses the machine resources much more than the handcrafted Ele-
gant. In fact, the consumption ratio for machining is 0.10 and 0.90 (us-
ing machine hours as the measure of usage). Thus, Fina uses 9 times
the machining resources as Elegant. Setup costs are similarly dis-
torted. The products use an equal number of setup hours. Yet if direct
labor dollars are used, then the Elegant briefcase receives three times
more machining costs than the Fina briefcase.
4. Products tend to make different demands on overhead activities and
this should be reflected in overhead cost assignments. Usually this
means the use of both unit and nonunit-level activity drivers. In this ex-
ample, there is a unit-level activity (machining) and a nonunit-level
activity (setting up equipment).
Machine rate: $18,000/5,000 = $3.60 per machine hour
Setup rate: $3,000/200 = $15 per setup hour
Costs assigned to each product:
Machining: Elegant Fina
$3.60 × 500 $ 1,800
$3.60 × 4,500 $16,200
Setups:
$15 × 100 1,500 1,500
Total $ 3,300 $17,700
Units ÷ 3,000 ÷ 3,000
Unit overhead cost $ 1.10 $ 5.90
10. 8844
4-11
1.
Resource Unloading Counting Inspecting
Equipment $12,000 $ 800
Fuel 2,400
Operating 1,000 500
Labor* 48,000 30,000 42,000
Total $63,400 $30,000 $43,300
*(0.40 × $120,000; 0.25 × $120,000; 0.35 × $120,000)
2. Direct tracing and driver tracing are used. When the resource is used only by
one activity, then direct tracing is possible. When the activities are shared, as in
the case of labor, then resource drivers must be used.
4–12
Activity dictionary:
Activity Activity Primary/ Activity
Name Description Secondary Driver
Providing nursing Satisfying patient Primary Nursing hours
care needs
Supervising Coordinating Secondary Number of nurses
nurses nursing activities
Feeding patients Providing meals Primary Number of meals
to patients
Laundering Cleaning and Primary Pounds of laundry
bedding and delivering clothes
clothes and bedding
Providing Therapy treatments Primary Hours of therapy
physical directed by
therapy physician
Monitoring Using equipment to Primary Monitoring hours
patients monitor patient
conditions
12. 8866
Approximating assignment:
Subassembly A Subassembly B
Setup:
$266.67 × 150 $40,000
$266.67 × 150 $ 40,000
Grinding:
$6.67 × 7,200 48,024
$6.67 × 10,800 72,036
Total costs assigned $88,024 $112,036
4. Error (Subassembly A) = ($91,000 - $88,024)/$91,000 = 0.033
Error (Subassembly B) = ($109,000 - $112,036)/$109,000 = - 0.028
The error is small and so the approach may be desirable as it reduces the
complexity and size of the system, making it more likely to be accepted by
management.
4–14
1. Unit-level activities: Machining
Batch-level activities: Setups and packing
Product-level activities: Receiving
Facility-level activities: None
2. Activity rates:
(1) Machining: $80,000/40,000 = $2 per MHr
(2) Setups: $32,000/400 = $80 per setup
(3) Receiving: $18,000/600 = $30 per receiving order
(4) Packing: $48,000/3,200 = $15 per packing order
Overhead assignment:
Infantry
Activity 1: $2 × 20,000 = $ 40,000
Activity 2: $80 × 300 = 24,000
Activity 3: $30 × 200 = 6,000
Activity 4: $15 × 2,400 = 36,000
Total $106,000
13. 8877
Special forces
Activity 1: $2 × 20,000 = $40,000
Activity 2: $80 × 100 = 8,000
Activity 3: $30 × 400 = 12,000
Activity 4: $15 × 800 = 12,000
Total $72,000
Combining Activities 2 and 4 produces a new pooled rate:
($32,000 +$48,000)/400 = $ 200 per setup
Overhead assignment:
Infantry
Activity 1: $2 × 20,000 = $ 40,000
Activity 2*: $200 × 300 = 60,000
Activity 3: $30 × 200 = 6,000
Total $106,000
*Combined activities 2 and 4
Special forces
Activity 1: $2 × 20,000 = $40,000
Activity 2: $200× 100 = 20,000
Activity 3: $30 × 400 = 12,000
Total $72,000
The assignments are the same and this happens because the consump-
tion ratios of activities 2 and 4 are identical. Thus, rate reduction can
occur by combining all activities with identical rates.
3. The two most expensive activities are the first and the combined 2 and 4
activities. Each has $80,000 of cost. Thus if the cost of activity 3 is allo-
cated in proportion to the cost, each of the expensive activities would
receive 50% of the $18,000 or $9,000. This yields the following pool
rates:
Activity (pool 1) 1: ($80,000 + $9,000)/40,000 = $2.225 per machine hour
Activities 2 and 4 (pool 2): ($80,000 + $9,000)/400 = $222.50 per setup
14. 8888
Overhead assignment:
Infantry
Pool 1: $2.225 × 20,000 = $ 44,500
Pool 2: $222.50 × 300 = 66,750
Total $111,250
Special forces
Pool 1: $2.225 × 20,000 = $44,500
Pool 2: $222.5 × 100 = 22,250
Total $66,750
4. Infantry: ($111,250 - $106,000)/$106,000 = .05 (rounded)
Special forces = ($66,750 - $72,000)/$72,000 = -.07 (rounded)
The error is less than 10% for both products. Using machine hours
would have produce a rate of $178,000/40,000 = $4.45 per Mhr and an
assignment of $89,000 to each product ($4.45 × 20,000). The error for
the plantwide rate would be
Infantry: ($89,000 - $106,000)/106,000 = 0.16 (rounded)
Special forces = ($89,000 - $72,000)/$72,000 = 0.24 (rounded)
Thus, the plantwide rate produces product costing errors that are more
than three times the magnitude of the approximately relevant ABC as-
signments. Clearly, the approximation produces a more reasonable and
useful outcome and is less complex than the full ABC system.
4–15
1. Unit-level: Testing products, inserting dies
2. Batch-level: Setting up batches, handling wafer lots, purchasing
materials, receiving materials
3. Product-level: Developing test programs, making probe cards,
engineering design, paying suppliers
4. Facility-level: Providing utilities, providing space
15. 8899
PROBLEMS
4–16
1. Cost before addition of duffel bags:
$60,000/100,000 = $0.60 per unit
The assignment is accurate because all costs belong to one product.
2. Activity-based cost assignment:
Stage 1:
Activity rate = $120,000/80,000 = $1.50 per transaction
Stage 2:
Overhead applied:
Backpacks: $1.50 × 40,000* = $60,000
Duffel bags: $1.50 × 40,000 = $60,000
*80,000 transactions/2 = 40,000 (number of transactions had
doubled)
Unit cost:
Backpacks: $60,000/100,000 = $0.60 per unit
Duffel bags: $60,000/25,000 = $2.40 per unit
3. Product cost assignment:
Overhead rates:
Patterns: $48,000/10,000 = $4.80 per direct labor hour
Finishing: $72,000/20,000 = $3.60 per direct labor hour
16. 9900
Unit cost computation:
Backpacks Duffel Bags
Patterns:
$4.80 × 0.1 $0.48
$4.80 × 0.4 $1.92
Finishing:
$3.60 × 0.2 0.72
$3.60 × 0.8 2.88
Total per unit $1.20 $4.80
4. This problem allows us to see what the accounting cost per unit should
be by providing the ability to calculate the cost with and without the
duffel bags. With this perspective, it becomes easy to see the benefits
of the activity-based approach over those of the functional-based ap-
proach. The activity-based approach provides the same cost per unit as
the single-product setting. The functional-based approach used trans-
actions to allocate accounting costs to each producing department,
and this allocation probably reflects quite well the consumption of ac-
counting costs by each producing department. The problem is the
second-stage allocation. Direct labor hours do not capture the con-
sumption pattern of the individual products as they pass through the
departments. The distortion occurs, not in using transactions to assign
accounting costs to departments, but in using direct labor hours to as-
sign these costs to the two products.
In a single-product environment, ABC offers no improvement in prod-
uct-costing accuracy. However, even in a single-product environment,
it may be possible to increase the accuracy of cost assignments to oth-
er cost objects such as customers.
4–17
1. Plantwide rate = $1,320,000/440,000 = $3.00 per DLH
Overhead cost per unit:
Model A: $3.00 × 140,000/30,000 = $14.00
Model B: $3.00 × 300,000/300,000 = $3.00
17. 9911
2. Calculation of activity rates:
Activity Driver Activity Rate
Setup Prod. runs $360,000/100 = $3,600 per run
Inspection Insp. hours $280,000/2,000 = $140 per hour
Machining Mach. Hours $320,000/220,000 = $1.454 per hr
Maintenance Maint. hours $360,000/100,000 =$3.60 per hr
Overhead assignment:
Model A Model B
Setups
$3,600 × 40 $ 144,000
$3,600 × 60 $216,000
Inspections
$140 × 800 112,000
$140 × 1,200 168,000
Machining
$1.454 × 20,000 29,080
$1.454 × 200,000 290,800
Maintenance
$3.60 × 10,000 36,000
$3.60 × 90,000 ----- 324,000
Total overhead $321,080 $998,800
Units produced ÷ 30,000 ÷300,000
Overhead per unit $ 10.70 $ 3.33
3. Departmental rates:
Overhead cost per unit:
Model A: [($4.66 × 10,000) + ($1.20 × 130,000)]/30,000 = $6.76
Model B: [($4.66 × 170,000) + ($1.20 × 270,000)]/300,000 = $3.72
4.
A common justification is that of using machine hours for machine-
intensive departments and labor hours for labor-intensive departments.
Using activity-based costs as the standard, we can say that departmen-
tal rates decreased the accuracy of the overhead cost assignment (over
18. 9922
the plantwide rate) for both products. Looking at Department 1, this de-
partment’s costs are assigned at a 17:1 ratio which overcosts B and
undercosts A in a big way. This raises some doubt about the conven-
tional wisdom regarding departmental rates.
4–18
1. Labor and gasoline are driver tracing.
Labor (0.75 × $180,000) $ 135,000 Time = Resource driver
Gasoline ($4.50 × 6,000 moves) 27,000 Moves = Resource driver
Depreciation 18,000 Direct tracing
Total cost $180,000
2. Plantwide rate = $660,000/20,000
= $33 per DLH
Unit cost:
Basic Deluxe
Prime costs $160.00 $320.00
Overhead:
$33 × 10,000/40,000 8.25
$33 × 10,000/20,000 16.50
$168.25 $336.50
3. Activity rates:
Maintenance $114,000/4,000 = $28.50 per maint. hour
Engineering $120,000/6,000 = $20 per eng. hour
Material handling $180,000/6,000 = $30 per move
Setting up $ 96,000/80 = $1,200 per move
Purchasing $ 60,000/300 = $200 per requisition
Receiving $ 40,000/750 = $53.33 per order
Paying suppliers $ 30,000/750 = $40 per invoice
Providing space $ 20,000/10,000 = $2.00 per machine hour
19. 9933
4-18 (continued)
Unit cost:
Basic Deluxe
Prime costs $6,400,000 $6,400,000
Overhead:
Maintenance
$28.50 × 1,000 28,500
$28.50 × 3,000 85,500
Engineering
$20 × 1,500 30,000
$20 × 4,500 90,000
Material Handling
$30 × 1,200 36,000
$30 × 4,800 144,000
Setting up
$1,200 × 16 19,200
$1,200 × 64 76,800
Purchasing
$200 × 100 20,000
$200 × 200 40,000
Receiving
$53.33 × 250 13,333
$53.33 × 500 26,665
Paying Suppliers
$40 × 250 10,000
$40 × 500 20,000
Providing space
$2 × 5,000 10,000
$2 × 5,000 10,000
Total $6,567,033 $6,892,965
Units produced ÷ 40,000 ÷ 20,000
Unit cost (ABC) $ 164.18 $ 344.65
Unit cost (traditional) $ 168.25 $ 336.50
The ABC costs are more accurate (better tracing—closer representa-
tion of actual resource consumption). This shows that the basic model
was overcosted and the deluxe model undercosted when the plantwide
overhead rate was used.
20. 9944
4-18 (continued)
4. Consumption ratios:
Maint. Eng. Mat. H. Setups Purch. Receiving Pay. Sup Space
Basic 0.25 0.25 0.20 0.20 0.33 0.33 0.33 0.50
Delux 0.75 0.75 0.80 0.80 0.67 0.67 0.67 0.50
5. When products consume activities in the same proportion, the activi-
ties with the same proportions can be combined into one pool. This is
so because the pooled costs will be assigned in the same proportion as
the individual activity costs. Using these consumption ratios as a
guide, we create four pools, reducing the number of rates from 8 to 4.
Pool 1:
Maintenance $114,000
Engineering 120,000
Total $234,000
Maintenance hours ÷ 4,000
Pool rate $ 58.50
Note: Engineering hours could also be used as a driver. The activities
are grouped together because they have the same consumption ratios:
(0.25, 0.75).
Pool 2: Material handling $180,000
Setting up 96,000
Total $276,000
Number of moves ÷ 6,000
Pool rate $ 46
Note: Material handling and setups have the same consumption ratios:
(0.20, 0.80). The number of setups could also be used as the pool driv-
er.
21. 9955
4-18 (concluded)
Pool 4: Purchasing $ 60,000
Receiving 40,000
Paying suppliers 30,000
Total $130,000
Orders processed ÷ 750
Pool rate $ 173.33
Note: The three activities are all product-level activities and have the
same consumption ratios: (0.33, 0.67)
Pool 5: Providing space $ 20,000
Machine hours ÷ 10,000
Pool rate $ 2
Note: This is the only facility-level activity.
4–19
1. Unit-level costs ($120 × 20,000) $ 2,400,000
Batch-level costs ($80,000 × 20) 1,600,000
Product-level costs ($80,000 × 10) 800,000
Facility-level ($20 × 20,000) 400,000
Total cost $ 5,200,000
2. Unit-level costs ($120 × 30,000) $ 3,600,000
Batch-level costs ($80,000 × 20) 1,600,000
Product-level costs ($80,000 × 10) 800,000
Facility-level costs 400,000
Total cost $ 6,400,000
The unit-based costs increase because these costs vary with the number of
units produced. Because the batches and engineering orders did not change,
the batch-level costs and product-level costs remain the same, behaving as
fixed costs with respect to the unit-based driver. The facility-level costs are
fixed costs and do not vary with any driver.
3. Unit-level costs ($120 × 30,000) $ 3,600,000
Batch-level costs ($80,000 × 30) 2,400,000
Product-level costs ($80,000 × 12) 960,000
Facility-level costs 400,000
Total cost $ 7,360,000
22. 9966
Batch-level costs increase as the number of batches changes, and the costs
of engineering support change as the number of orders change. Thus,
batches and orders increased, increasing the total cost of the model.
4. Classifying costs by category allows their behavior to be better understood.
This, in turn, creates the ability to better manage costs and make decisions.
4–20
1. The total cost of care is $1,950,000 plus a $50,000 share of the cost of super-
vision [(25/150) × $300,000]. The cost of supervision is computed as follows:
Salary of supervisor (direct) $ 70,000
Salary of secretary (direct) 22,000
Capital costs (direct) 100,000
Assistants (3 × 0.75 × $48,000) 108,000
Total $ 300,000
Thus, the cost per patient day is computed as follows:
$2,000,000/10,000 = $200 per patient day
(The total cost of care divided by patient days.) Notice that every maternity
patient—regardless of type—would pay the daily rate of $200.
2. First, the cost of the secondary activity (supervision) must be assigned to the
primary activities (various nursing care activities) that consume it (the driver
is the number of nurses):
Maternity nursing care assignment:
(25/150) × $300,000 = $50,000
Thus, the total cost of nursing care is $950,000 + $50,000 = $1,000,000.
Next, calculate the activity rates for the two primary activities:
Occupancy and feeding: $1,000,000/10,000 = $100 per patient day
Nursing care: $1,000,000/50,000 = $20 per nursing hour
23. 9977
4–20 Concluded
Finally, the cost per patient day type can be computed:
Patient Daily Rate*
Normal $150
Cesarean 225
Complications 500
*($100 × 7,000) + ($20 × 17,500)/7,000
($100 × 2,000) + ($20 × 12,500)/2,000
($100 × 1,000) + ($20 × 20,000)/1,000
This example illustrates that activity-based costing can produce significant
product costing improvements in service organizations that experience prod-
uct diversity.
3. The Laundry Department cost would increase the total cost of the Maternity
Department by $100,000 [(200,000/1,000,000) × $500,000]. This would increase
the cost per patient day by $10 ($100,000/10,000). The activity approach would
need more detailed information—specifically, the amount of pounds of laun-
dry caused by each patient type. The activity approach will increase the accu-
racy of the cost assignment if patient types produce a disproportionate share
of laundry. For example, if patients with complications produce 40 percent of
the pounds with only 10 percent of the patient days, then the $10 charge per
day is not a fair assignment.
24. 9988
4–21
1. Activity classification:
Unit-level: Machining
Batch-level: Material handling, setups, inspection, and receiving
Product-level: Maintenance and engineering
Facility-level: None
2. Pool 1, consumption ratios: (0.5, 0.5):
Machining $ 90,000
Activity driver ÷ 100,000 MHr
Pool rate $ 0.90 per MHr
Pool 2, consumption ratios: (0.75, 0.25):
Setups $ 96,000
Inspection 60,000
Total $ 156,000
Activity driver ÷ 80 setups*
Pool rate $ 1,950 per setup
*Inspection hours could also be used.
Pool 3, consumption ratios: (0.33, 0.67):
Material handling $ 120,000
Receiving 30,000
Total $ 150,000
Activity driver ÷ 6,000 material moves
Pool rate $ 25 per move
Pool 4, consumption ratios: (0.67, 0.33):
Engineering $ 100,000
Maintenance 80,000
Total $ 180,000
Activity driver ÷ 6,000 maintenance hours*
Pool rate $ 30 per maintenance hour
*Number of engineering hours could also be used.
25. 9999
4–21 Concluded
3. Computation of unit overhead costs:
Small Clock Large Clock
Unit-level activities:
Pool 1:
$0.90 × 50,000 $ 45,000
$0.90 × 50,000 $ 45,000
Batch-level activities:
Pool 2:
$1,950 × 60 117,000
$1,950 × 20 39,000
Pool 3:
$25 × 2,000 50,000
$25 × 4,000 100,000
Product-level activities:
Pool 4:
$30 × 4,000 120,000
$30 × 2,000 60,000
Total overhead costs $ 332,000 $ 244,000
Units produced ÷ 100,000 ÷ 200,000
Overhead cost per unit $ 3.32 $ 1.22
27. 110011
4–22 Continued
Overhead assignment:
X-12 S-15
Setup costs:
$800 × 100 $ 80,000
$800 × 200 $ 160,000
Machine costs:
$9.46 × 125,000 1,182,500
$9.46 × 60,000 567,600
Receiving costs:
$1,500 × 400 600,000
$1,500 × 1,000 1,500,000
Engineering costs:
$200 × 5,000 1,000,000
$200 × 5,000 1,000,000
Material-handling costs:
$1,000 × 500 500,000
$1,000 × 400 400,000
Total overhead costs $ 3,362,500 $ 3,627,600
Units produced ÷ 1,000,000 ÷ 200,000
Overhead cost per kg $ 3.36 $ 18.14
Prime cost per kg 4.27 3.13
Unit cost $ 7.63 $ 21.27
Selling price $ 15.93 $ 12.00
Less unit cost 7.63 21.27
Unit gross margin $ 8.30 $ (9.27)
28. 110022
4–22 Concluded
3. No. The cost of making X-12 is $7.63, much less than the amount indicated by
functional-based costing. The company can compete by lowering its price on
the high-volume product. The $10 price offered by competitors is not out of
line. The concern about selling below cost is unfounded.
4. The $12 price of compound S-15 is well below its cost of production. This ex-
plains why Pearson has no competition and why customers are willing to pay
$15, a price that is probably still way below competitors’ quotes.
5. The price of X-12 should be lowered to a competitive level and the price of
S-15 increased so that a reasonable return is being earned.
4–23
1. Activity rates:
Testing products = $252,000/300 = $840 per setup
Purchasing materials = $36,000/1,800 = $20 per order
Machining = $252,000/21,000 = $12 per machine hour
Receiving = $60,000/2,500 = $24 per receiving hour
Overhead cost assignment:
Model A Model B
Testing products:
$840 × 200 $168,000
$840 × 100 $ 84,000
Purchasing materials:
$20 × 600 12,000
$20 × 1,200 24,000
Machining:
$12 × 12,000 144,000
$12 × 9,000 108,000
Receiving:
$24 × 750 18,000
$24 × 1,750 42,000
Total OH assigned $342,000 $258,000
29. 110033
2. New cost pools:
Testing products: $252,000 + [($252,000/$504,000) × $96,000] = $300,000
Machining: $252,000 + [($252,000/$504,000) × $96,000] = $300,000
New activity rates:
Testing products: $300,000/300 = $1,000 per setup
Machining: $300,000/21,000 = $14.29 per hour
Model A Model B
Testing products:
$1,000 × 200 $200,000
$1,000 × 100 $100,000
Machining:
$14.29 × 12,000 171,480
$14.29 × 9,000 128,610
Total OH assigned $371,480 $228,610
3. Percentage error:
Model A: ($371,480 – $342,000)/$342,000 = 0.086 (8.6%)
Model B: ($228,610 – $258,000)/$258,000 = –0.114 (11.4%)
The error is not bad and is certainly not in the range that is often seen when
comparing a plantwide rate assignment with the ABC costs. For example, if Model
A is expected to use 30% of the direct labor hours, then it would receive a plant-
wide assignment of $180,000, producing an error of more than 47%—an error al-
most six times greater than the approximately relevant assignment. In this type of
situation, it may be better to go with two drivers to gain acceptance and get rea-
sonably close to the more accurate ABC cost. It also avoids the data collection
costs of the bigger system.
31. 110055
$4,706 × 45 batches 211,770
$4,706 × 55 batches 258,830
Total overhead costs $1,506,570 $2,496,030
Units produced ÷ 1,500 ÷ 3,000
Overhead per unit $ 1,004 $ 832
3. Percentage error:
Error (Subassembly A) = ($1,004 – $1,108)/$1,108 = –0.094 (–9.4%)
Error (Subassembly B) = ($832 – $779)/$779 = 0.068 (6.8%)
The error is at most 10%. The simplification is simple and easy to implement.
Most of the costs (85%) are assigned accurately. Only three rates are used to as-
sign the costs, representing a significant reduction in complexity.
32. 110066
MANAGERIAL DECISION CASES
4–25
1. Shipping and warehousing costs are currently assigned using tons of paper
produced, a unit-based measure. Many of these costs, however, are not dri-
ven by quantity produced. Many products have special handling and shipping
requirements involving extra costs. These costs should not be assigned to
those products that are shipped directly to customers.
2. The new method proposes assigning the costs of shipping and warehousing
separately for the low-volume products. To do so requires three cost assign-
ments: receiving, shipping, and carrying. The cost drivers for each cost are
tons processed, items shipped, and tons sold.
Pool rate, receiving costs:
Receiving cost/Tons processed = $1,100,000/56,000 tons
= $19.64 per ton processed*
Pool rate, shipping costs:
Shipping cost per shipping item = $2,300,000/190,000
= $12.11 per shipping item*
Pool rate, carrying cost (an opportunity cost):
Carrying cost per year (LLHC) = 25 × $1,665 × 0.16
= $6,660
Carrying cost per ton sold = $6,660/10 = $666
Shipping and warehousing cost per ton sold:
Receiving $ 19.64
Shipping ($12.11 × 7) 84.77
Carrying 666.00
Total $770.41
*Rounded
33. 110077
4–25 Continued
3. Profit analysis:
Revised profit per ton (LLHC):
Selling price $2,400.00
Less manufacturing cost 1,665.00
Gross profit $ 735.00
Less shipping and warehousing 770.41
Loss $ (35.41)
Original profit per ton:
Selling price $2,400.00
Less manufacturing costs 1,665.00
Gross profit $ 735.00
Less shipping and warehousing 30.00
Profit $ 705.00
The revised profit, reflecting a more accurate assignment of shipping and wa-
rehousing costs, presents a much different picture of LLHC. The product is,
in reality, losing money for the company. Its earlier apparent profitability was
attributable to a subsidy being received from the high-volume products (by
spreading the special shipping and handling costs over all products, using
tons produced as the cost driver). The same effect is also true for the other
low-volume products. Essentially, the system is understating the handling
costs for low-volume products and overstating the cost for high-volume
products.
4. The decision to drop some high-volume products and emphasize low-volume
products could clearly be erroneous. As LLHC has demonstrated, its appar-
ent profitability is attributable to distorted cost assignments. A significant
change in the image of LLHC was achieved by simply improving the accuracy
of shipping and handling costs. Further improvements in accuracy in the
overhead assignments may cause the view of LLHC to deteriorate even more.
Conversely, the profitability of high-volume products may improve signifi-
cantly with increased costing accuracy. This example underscores the impor-
tance of having accurate and reliable accounting information. The accounting
system must bear the responsibility of providing reliable information.
34. 110088
4–25 Concluded
5. Ryan’s strategy changed because his information concerning the individual
products changed. Apparently, the accounting system was undercosting the
low-volume products and overcosting the high-volume products. Once better
information was available, Ryan was able to respond better to competitive
conditions.
4–26
1. Disagree. Chuck is expressing an uninformed opinion. He has not spent the
effort to find out exactly what activity-based management and costing are at-
tempting to do; therefore, he has no real ability to offer any constructive criti-
cism of the possible benefits of these two approaches.
2. and 3.
At first glance, it may seem strange to even ask if Chuck’s behavior is unethi-
cal. After all, what is unethical about expressing an opinion, albeit unin-
formed? While offering uninformed opinions or recommendations may be of
little consequence in many settings, a serious issue arises when a person’s
expertise is relied upon by others to make decisions or take actions that
could be wrong or harmful to themselves or their organizations. This very
well may be the case for Chuck’s setting, and his behavior may be labeled
professionally unethical.
Chuck’s lack of knowledge about activity-based systems is a signal of his
failure to maintain his professional competence. Standard I-1 of the IMA
Statement of Ethical Professional Practice indicates that management ac-
countants have a responsibility to continually develop their knowledge and
skills. Failure to do so is unethical.
RESEARCH ASSIGNMENT
4–27
Answers will vary.