Chapter 10
•Download as PPT, PDF•
1 like•1,969 views
The document discusses various systems for warning first responders about hazardous materials, including the U.S. DOT placard system for transportation and the NFPA 704 system for fixed facilities. It also describes agencies like the EPA, NOAA, Coast Guard that provide chemical information and the responsibilities of state and local emergency planning committees. The challenges of weapons of mass destruction incidents led to the development of the National Incident Management System.
Report
Share
Report
Share
![Objectives ,[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
ASME BPVC 2023 Section I para leer y entender
This document contains the rules and requirements for constructing power boilers according to the 2023 edition of the ASME Boiler and Pressure Vessel Code Section I. It outlines materials, design, openings, piping connections and other general requirements that must be followed. Markings like "ASME" can only be used if the item was constructed according to all applicable Code requirements and was formally ASME certified. The document also contains copyright information and a table of contents listing the specific rule sections covered.
Steam Header Design in Fluid (Steam) System
Hello
in this section, we are going to see following :
1. What is steam header
2. Find dimensions: Off-takes, header, piping etc. as per design
3. Selection of steam accessories: valves, separators, traps etc.
4. Layout of designed system
Thanks and Regards,
Aditya D.
deshadi805@gmail.com
Pressure Safety Valve Sizing - API 520/521/526
No chemical process facility is immune to the risk of overpressure to avoid dictating the necessity for overpressure protection. For every situation that demands safe containment of process gas, it becomes an obligation for engineers to equally provide pressure relieving and flaring provisions wherever necessary. The levels of protection are hierarchical, starting with designing an inherently safe process to avoid overpressure followed by providing alarms for operators to intervene and Emergency Shutdown provisions through ESD and SIL rated instrumentation. Beyond these design and instrument based protection measures, the philosophy of containment and abatement steps such as pressure relieving devices, flares, physical dikes and Emergency Response Services is employed
API 650 vs 620
A basic comparison of two of the most used design standard for storage tanks in the oil and gas indusry.
High pressure vessel leakage in urea plants
In urea plant ammonium carbamate solution is very corrosive; all metals have corrosion problems with ammonium carbamate and the corrosion problems increase with temperature, a ten degree Celsius rise in temperature doubles the corrosion rate to the point where the duplex steel is no longer acceptable. The material plays a very important role in Urea plants. The space between the reactor liner and the shell is most often empty and employs various methods of detecting a leak ranging from conductivity measurements. Vacuum leak detection system, pressure leak detection system etc. Titanium, SS316L (urea grade), 2 RE-69 etc.) Over the years that can resist ammonium carbamate corrosion. Materials plays very important role in any industry. Selection of material is vital at design stage itself ,Wrong selection of material may lead to catastrophic failures and outage of plants & even loss of Human lives, Right selection of material leads to long life of plant. In the latest plants specialty duplex materials are used for liner. The actual reactor has been constructed using a variety of materials, e.g. Zirconium, Vessel inside a protective liner. This paper intended study of number of leakage in the HP loop vessels, e.g. Zirconium, Vessel inside a protective liner. This paper intended study of number of leakage in the HP loop vessels, e.g. Reactor, Stripper, Carbamate condenser etc. How to detect leakage and troubleshooting during detection and attending the leakages.
IS 4985 : 2000
This document provides the specification for unplasticized polyvinyl chloride (UPVC) pipes used for potable water supplies. It covers requirements for both plain and socket-ended UPVC pipes. The document defines important terminology related to pipe dimensions and establishes classifications for pipes based on working pressure ratings at 27°C. It specifies composition of the pipes, permissible dimensions and tolerances, and required mechanical and physical properties. The document also describes various tests to be conducted on pipe samples including type tests and acceptance tests.
Thermopack ppt
This document contains information about the operation of a Thermopack unit. It includes descriptions of the main components like the burner, circulation pumps, safety valves, heat exchangers and more. It also provides details on the control system components like the PLC, sensors, actuators and wiring diagrams. The document is meant to explain the working and components of the Thermopack unit.
Buku Pintar MIGAS INDONESIA - Sertifikasi lokasi berbahaya untuk peralatan li...
Buku Pintar MIGAS INDONESIA - Sertifikasi lokasi berbahaya untuk peralatan li...Ariyandi Yuda Prahara
SERTIFIKASI LOKASI BERBAHAYA UNTUK PERALATAN LISTRIK
author - Alvin Alfiyansyah
Process Engineer
PT. Technip Indonesia – BalikpapanRecommended
ASME BPVC 2023 Section I para leer y entender
This document contains the rules and requirements for constructing power boilers according to the 2023 edition of the ASME Boiler and Pressure Vessel Code Section I. It outlines materials, design, openings, piping connections and other general requirements that must be followed. Markings like "ASME" can only be used if the item was constructed according to all applicable Code requirements and was formally ASME certified. The document also contains copyright information and a table of contents listing the specific rule sections covered.
Steam Header Design in Fluid (Steam) System
Hello
in this section, we are going to see following :
1. What is steam header
2. Find dimensions: Off-takes, header, piping etc. as per design
3. Selection of steam accessories: valves, separators, traps etc.
4. Layout of designed system
Thanks and Regards,
Aditya D.
deshadi805@gmail.com
Pressure Safety Valve Sizing - API 520/521/526
No chemical process facility is immune to the risk of overpressure to avoid dictating the necessity for overpressure protection. For every situation that demands safe containment of process gas, it becomes an obligation for engineers to equally provide pressure relieving and flaring provisions wherever necessary. The levels of protection are hierarchical, starting with designing an inherently safe process to avoid overpressure followed by providing alarms for operators to intervene and Emergency Shutdown provisions through ESD and SIL rated instrumentation. Beyond these design and instrument based protection measures, the philosophy of containment and abatement steps such as pressure relieving devices, flares, physical dikes and Emergency Response Services is employed
API 650 vs 620
A basic comparison of two of the most used design standard for storage tanks in the oil and gas indusry.
High pressure vessel leakage in urea plants
In urea plant ammonium carbamate solution is very corrosive; all metals have corrosion problems with ammonium carbamate and the corrosion problems increase with temperature, a ten degree Celsius rise in temperature doubles the corrosion rate to the point where the duplex steel is no longer acceptable. The material plays a very important role in Urea plants. The space between the reactor liner and the shell is most often empty and employs various methods of detecting a leak ranging from conductivity measurements. Vacuum leak detection system, pressure leak detection system etc. Titanium, SS316L (urea grade), 2 RE-69 etc.) Over the years that can resist ammonium carbamate corrosion. Materials plays very important role in any industry. Selection of material is vital at design stage itself ,Wrong selection of material may lead to catastrophic failures and outage of plants & even loss of Human lives, Right selection of material leads to long life of plant. In the latest plants specialty duplex materials are used for liner. The actual reactor has been constructed using a variety of materials, e.g. Zirconium, Vessel inside a protective liner. This paper intended study of number of leakage in the HP loop vessels, e.g. Zirconium, Vessel inside a protective liner. This paper intended study of number of leakage in the HP loop vessels, e.g. Reactor, Stripper, Carbamate condenser etc. How to detect leakage and troubleshooting during detection and attending the leakages.
IS 4985 : 2000
This document provides the specification for unplasticized polyvinyl chloride (UPVC) pipes used for potable water supplies. It covers requirements for both plain and socket-ended UPVC pipes. The document defines important terminology related to pipe dimensions and establishes classifications for pipes based on working pressure ratings at 27°C. It specifies composition of the pipes, permissible dimensions and tolerances, and required mechanical and physical properties. The document also describes various tests to be conducted on pipe samples including type tests and acceptance tests.
Thermopack ppt
This document contains information about the operation of a Thermopack unit. It includes descriptions of the main components like the burner, circulation pumps, safety valves, heat exchangers and more. It also provides details on the control system components like the PLC, sensors, actuators and wiring diagrams. The document is meant to explain the working and components of the Thermopack unit.
Buku Pintar MIGAS INDONESIA - Sertifikasi lokasi berbahaya untuk peralatan li...
Buku Pintar MIGAS INDONESIA - Sertifikasi lokasi berbahaya untuk peralatan li...Ariyandi Yuda Prahara
SERTIFIKASI LOKASI BERBAHAYA UNTUK PERALATAN LISTRIK
author - Alvin Alfiyansyah
Process Engineer
PT. Technip Indonesia – BalikpapanCembre Hexagonal Die Sets - Selection Guide For Cembre Hydraulic Crimping Tools
Cembre Hexagonal Die Sets - Selection Guide For Cembre Hydraulic Crimping ToolsThorne & Derrick International
The document appears to be a chart providing information on hydraulic tools, dies, and connectors for various conductor sizes. It lists applicable dies, nests, indentors, and adapters for a wide range of conductor gauges from 0.25-200 mm2 for tasks such as crimping, splicing, connecting, and tapping conductors. It also includes information for extra flexible and aluminum conductors. The chart acts as a reference for selecting the proper equipment to complete various jobs on copper, aluminum and flexible conductors of differing sizes.Fire and Gas Detection System : Part 2_Block Diagram_Philosophy, Signal Types...
Fire and Gas Detection System Requirements for the Oil and Gas Industry. Offshore Platforms are also applicable for onshore plants/terminals. Safeguarding and Protective System to ensure oil and gas facilities are safe to operate.
LPG – Liquefied Petroleum Gas & Gas Detection System
This document provides information about LPG (liquefied petroleum gas) and gas detection systems. It discusses what LPG is, how it is used to supply buildings and various appliances, and the components of LPG and gas detection systems including piping, outlets, sensors, panels, and standards. The document also outlines procedures for installing, testing, commissioning, maintaining and operating LPG and gas detection systems. Calculations for LPG demand, storage, and pipe sizing are presented.
Wet Chemical vs. Water Sprinkler
Learn more about the differences between wet chemical pre-engineered restaurant systems and water sprinklers. Examines test results from both systems and includes the benefits and downfalls of each.
Electrical wiring systems and safety devices.pptx
Electricity can cause serious injuries or death if safety precautions are not followed. Some common electrical hazards include exposed electrical parts, overloaded circuits, defective insulation, improper grounding, and damaged power tools. It is important for workers to be aware of electrical hazards and follow safety practices such as inspecting cords before use, avoiding overloading circuits, staying away from unguarded conductors, and wearing appropriate personal protective equipment when working with electricity. Training workers on electrical safety practices, lockout/tagout procedures, and safe work practices is essential for prevention of electrical accidents.
C&i systems
The document discusses how work is done in a turbine. It explains that:
1) The heat energy in steam is converted to kinetic energy as it enters the turbine through nozzles, and then to mechanical work as it impacts the rotating blades.
2) Further work is done as the steam reacts with fixed blades, redirecting it to more rotating blades.
3) As the steam travels through the machine, it continually expands, giving up energy at each set of blades.
4) The tapering shape of the turbine allows the steam to enter at smaller blades and exit at larger blades.
Sprinkler system
This document summarizes the components and operation of a sprinkler system on a ship. It describes how sprinkler heads are activated by heat and spray water over a large area. The system includes a pressurized water tank, pumps, valves, and an alarm system. When a sprinkler activates, an alarm sounds and the location is indicated. The installation has multiple sections that can be isolated. Fresh water is used initially to reduce corrosion, and cleaning is important to ensure proper operation.
Life Safety Code: NFPA 101, IFC 2015 & OSHA Subpart E
An overview from Antea Group on the purpose and application of Life Safety Code, as well as a deep dive into relevant regulations NFPA 101, IFC 2015, and OSHA Subpart E. For more information, visit http://us.anteagroup.com/en-us/services/health-and-safety.
Urea reactor liner leakage(a case study)
The document discusses liner leakage issues in the urea reactor of a fertilizer plant in India. It describes two instances of leakage detected through the weep hole monitoring system, in 2006 and 2017. Both times, the plant underwent shutdowns to locate and repair the leak. Detection methods like soap solution, ammonia testing, and differential pressure checks were used. The 2017 leak took longer to locate and required welding repairs between trays. The shutdown lasted 72 hours before feed was restored. Proper monitoring and maintenance of weep holes and liners is important for preventing corrosion and leaks.
Oil and Gas Industry : Datasheet for Fire and Gas Detectors.pdf
Oil and Gas Industry Requirements/Guidelines for Fire and Gas Detectors - datasheets for field devices and some training notes.
Technology Economics: Ethylene via Ethanol Dehydration
Intratec presents a techno-economic study on a mature chemical process for the production of ethylene via ethylene dehydration, similar to that developed by Chematur and Petron's. Besides a full technology description, an economic analysis is presented for a plant located in the U. S. Gulf and both capital and operating costs are also presented for a plant located in Brazil.
Know more at http://www.intratec.us/publications/ethylene-via-ethanol-dehydration
Fire_Fighting_Course_Prepared_by.pdf
The document provides an overview of different types of fire fighting systems, including water-based and gas-based automatic and manual systems. It discusses components and procedures for common water-based automatic sprinkler systems like wet pipe, dry pipe, pre-action, and deluge systems. It also covers water-based manual firefighting systems and gas-based automatic and manual fire suppression systems. Diagrams and case studies are provided to illustrate key concepts and system configurations.
Kingsmill - Copper Earthing, Surge Protection & Lightning Protection
Kingsmill Industries (UK) Ltd is a leading manufacturer and distributor of earthing and lightning protection products in the UK and export markets. The company aims to provide high quality products and excellent customer service without compromising on price. All products are manufactured according to British and international standards like BS EN 62305, BS EN 50164, and BS 7430. The catalog provides information on Kingsmill's wide range of earthing and lightning protection products and components. Recent projects utilizing Kingsmill products include restoring the lightning protection system on the historic Jessops Monument tower and supplying materials for international projects in Ireland, Syria, and other locations.
Busbar sizing
The document discusses factors that cause fires, with electricity playing a major role through accidental causes. It focuses on proper sizing of busbars in electrical panels to prevent fires. Busbar sizing is important as undersized busbars cannot carry full load currents and can melt. While thumb rules are used, proper calculations considering factors like current capacity, clearance, and temperature rise are needed. An example calculation for busbar sizing in a transformer panel is provided.
CPD Presentation: General Principles of Smoke Control
Overview of the history of Smoke Control.
Legislation and the use of smoke control in the construction industry, including basic principles and guidelines for the main applications, including:
Single Storey Buildings
Shopping Centres
Atria
Fire fighting shafts
Apartment buildings
Car Parks
Busbar design
The document discusses the design basics of busbar systems. It describes how copper is well-suited for busbars due to its high electrical and thermal conductivity. It then covers how to calculate current ratings for busbars which depend on working temperature, heat loss through convection and radiation, and the generated heat from current. The economic sizing of busbars is also discussed, finding the cross-sectional area that results in the lowest lifetime costs considering materials, installation, and energy costs. Software is available to assist with these busbar calculations.
Fundamental training on Fire Detection & Alarm System
This is a basic training on Fire Detection and Alarm System, created to give my colleagues from non-engineering divisions a comprehensive brief on the system. This is most suitable for individuals with little or no technical knowledge. This training introduces the devices and the system in a whole, not how to design it.
Nitrogen purging
This document provides a nitrogen purging procedure for repairing a 16" gas pipeline between UTUE KP and UBIT PP in Nigeria. It outlines the objectives, scope of work, safety considerations, equipment needs, and step-by-step work procedures. The key steps include isolating and depressurizing the pipeline, installing nitrogen tie-in points, purging the line with nitrogen in cycles until gas concentration drops below 5% LEL, recording purge results, and demobilizing equipment. The procedure is intended to remove combustible gases and oxygen from the pipeline to allow for safe repair work.
Safety valve in process industry1
Safety valves are automatic pressure relief devices that prevent excessive pressure buildup in systems like reactors, pipelines, and compressors. They open rapidly when pressure exceeds the set point to safely release pressure and reclose once normal pressure is restored. Proper safety valve design and sizing according to codes like API 520 and 526 is critical to ensure the valve can relieve the required flow rate without overpressurizing equipment. Key parameters include pressure conditions, required flow rate, orifice area, and type of valve.
PPT on ESP
This document provides an overview of an electrostatic precipitator (ESP) used to remove dust particles from industrial exhaust gases. It discusses how ESPs work by using corona discharge to electrically charge particles, which are then attracted to oppositely charged collection plates. The document also outlines the construction of an ESP including discharge electrodes, collection plates, casing and hopper. It compares dry and wet ESP types and discusses factors that influence ESP performance such as particle size distribution and flue gas temperature.
2014 WMD Sanctions Presentation
Presentation given at the Permanent Mission of Canada to the United Nations on implementation of sanctions with regard to DPRK and Iran.
Chapter 05
This document discusses various public and private support organizations that assist the fire service. It identifies national and international organizations like the American Red Cross, NFPA, and IAFC. It also describes federal organizations such as FEMA, NIOSH, and OSHA. State organizations discussed include offices of the state fire marshal and state forestry departments. Local support organizations mentioned are police, EMS, and community groups. The purpose of these organizations is to provide resources, training, legislation assistance, and support to firefighters.
More Related Content
What's hot
Cembre Hexagonal Die Sets - Selection Guide For Cembre Hydraulic Crimping Tools
Cembre Hexagonal Die Sets - Selection Guide For Cembre Hydraulic Crimping ToolsThorne & Derrick International
The document appears to be a chart providing information on hydraulic tools, dies, and connectors for various conductor sizes. It lists applicable dies, nests, indentors, and adapters for a wide range of conductor gauges from 0.25-200 mm2 for tasks such as crimping, splicing, connecting, and tapping conductors. It also includes information for extra flexible and aluminum conductors. The chart acts as a reference for selecting the proper equipment to complete various jobs on copper, aluminum and flexible conductors of differing sizes.Fire and Gas Detection System : Part 2_Block Diagram_Philosophy, Signal Types...
Fire and Gas Detection System Requirements for the Oil and Gas Industry. Offshore Platforms are also applicable for onshore plants/terminals. Safeguarding and Protective System to ensure oil and gas facilities are safe to operate.
LPG – Liquefied Petroleum Gas & Gas Detection System
This document provides information about LPG (liquefied petroleum gas) and gas detection systems. It discusses what LPG is, how it is used to supply buildings and various appliances, and the components of LPG and gas detection systems including piping, outlets, sensors, panels, and standards. The document also outlines procedures for installing, testing, commissioning, maintaining and operating LPG and gas detection systems. Calculations for LPG demand, storage, and pipe sizing are presented.
Wet Chemical vs. Water Sprinkler
Learn more about the differences between wet chemical pre-engineered restaurant systems and water sprinklers. Examines test results from both systems and includes the benefits and downfalls of each.
Electrical wiring systems and safety devices.pptx
Electricity can cause serious injuries or death if safety precautions are not followed. Some common electrical hazards include exposed electrical parts, overloaded circuits, defective insulation, improper grounding, and damaged power tools. It is important for workers to be aware of electrical hazards and follow safety practices such as inspecting cords before use, avoiding overloading circuits, staying away from unguarded conductors, and wearing appropriate personal protective equipment when working with electricity. Training workers on electrical safety practices, lockout/tagout procedures, and safe work practices is essential for prevention of electrical accidents.
C&i systems
The document discusses how work is done in a turbine. It explains that:
1) The heat energy in steam is converted to kinetic energy as it enters the turbine through nozzles, and then to mechanical work as it impacts the rotating blades.
2) Further work is done as the steam reacts with fixed blades, redirecting it to more rotating blades.
3) As the steam travels through the machine, it continually expands, giving up energy at each set of blades.
4) The tapering shape of the turbine allows the steam to enter at smaller blades and exit at larger blades.
Sprinkler system
This document summarizes the components and operation of a sprinkler system on a ship. It describes how sprinkler heads are activated by heat and spray water over a large area. The system includes a pressurized water tank, pumps, valves, and an alarm system. When a sprinkler activates, an alarm sounds and the location is indicated. The installation has multiple sections that can be isolated. Fresh water is used initially to reduce corrosion, and cleaning is important to ensure proper operation.
Life Safety Code: NFPA 101, IFC 2015 & OSHA Subpart E
An overview from Antea Group on the purpose and application of Life Safety Code, as well as a deep dive into relevant regulations NFPA 101, IFC 2015, and OSHA Subpart E. For more information, visit http://us.anteagroup.com/en-us/services/health-and-safety.
Urea reactor liner leakage(a case study)
The document discusses liner leakage issues in the urea reactor of a fertilizer plant in India. It describes two instances of leakage detected through the weep hole monitoring system, in 2006 and 2017. Both times, the plant underwent shutdowns to locate and repair the leak. Detection methods like soap solution, ammonia testing, and differential pressure checks were used. The 2017 leak took longer to locate and required welding repairs between trays. The shutdown lasted 72 hours before feed was restored. Proper monitoring and maintenance of weep holes and liners is important for preventing corrosion and leaks.
Oil and Gas Industry : Datasheet for Fire and Gas Detectors.pdf
Oil and Gas Industry Requirements/Guidelines for Fire and Gas Detectors - datasheets for field devices and some training notes.
Technology Economics: Ethylene via Ethanol Dehydration
Intratec presents a techno-economic study on a mature chemical process for the production of ethylene via ethylene dehydration, similar to that developed by Chematur and Petron's. Besides a full technology description, an economic analysis is presented for a plant located in the U. S. Gulf and both capital and operating costs are also presented for a plant located in Brazil.
Know more at http://www.intratec.us/publications/ethylene-via-ethanol-dehydration
Fire_Fighting_Course_Prepared_by.pdf
The document provides an overview of different types of fire fighting systems, including water-based and gas-based automatic and manual systems. It discusses components and procedures for common water-based automatic sprinkler systems like wet pipe, dry pipe, pre-action, and deluge systems. It also covers water-based manual firefighting systems and gas-based automatic and manual fire suppression systems. Diagrams and case studies are provided to illustrate key concepts and system configurations.
Kingsmill - Copper Earthing, Surge Protection & Lightning Protection
Kingsmill Industries (UK) Ltd is a leading manufacturer and distributor of earthing and lightning protection products in the UK and export markets. The company aims to provide high quality products and excellent customer service without compromising on price. All products are manufactured according to British and international standards like BS EN 62305, BS EN 50164, and BS 7430. The catalog provides information on Kingsmill's wide range of earthing and lightning protection products and components. Recent projects utilizing Kingsmill products include restoring the lightning protection system on the historic Jessops Monument tower and supplying materials for international projects in Ireland, Syria, and other locations.
Busbar sizing
The document discusses factors that cause fires, with electricity playing a major role through accidental causes. It focuses on proper sizing of busbars in electrical panels to prevent fires. Busbar sizing is important as undersized busbars cannot carry full load currents and can melt. While thumb rules are used, proper calculations considering factors like current capacity, clearance, and temperature rise are needed. An example calculation for busbar sizing in a transformer panel is provided.
CPD Presentation: General Principles of Smoke Control
Overview of the history of Smoke Control.
Legislation and the use of smoke control in the construction industry, including basic principles and guidelines for the main applications, including:
Single Storey Buildings
Shopping Centres
Atria
Fire fighting shafts
Apartment buildings
Car Parks
Busbar design
The document discusses the design basics of busbar systems. It describes how copper is well-suited for busbars due to its high electrical and thermal conductivity. It then covers how to calculate current ratings for busbars which depend on working temperature, heat loss through convection and radiation, and the generated heat from current. The economic sizing of busbars is also discussed, finding the cross-sectional area that results in the lowest lifetime costs considering materials, installation, and energy costs. Software is available to assist with these busbar calculations.
Fundamental training on Fire Detection & Alarm System
This is a basic training on Fire Detection and Alarm System, created to give my colleagues from non-engineering divisions a comprehensive brief on the system. This is most suitable for individuals with little or no technical knowledge. This training introduces the devices and the system in a whole, not how to design it.
Nitrogen purging
This document provides a nitrogen purging procedure for repairing a 16" gas pipeline between UTUE KP and UBIT PP in Nigeria. It outlines the objectives, scope of work, safety considerations, equipment needs, and step-by-step work procedures. The key steps include isolating and depressurizing the pipeline, installing nitrogen tie-in points, purging the line with nitrogen in cycles until gas concentration drops below 5% LEL, recording purge results, and demobilizing equipment. The procedure is intended to remove combustible gases and oxygen from the pipeline to allow for safe repair work.
Safety valve in process industry1
Safety valves are automatic pressure relief devices that prevent excessive pressure buildup in systems like reactors, pipelines, and compressors. They open rapidly when pressure exceeds the set point to safely release pressure and reclose once normal pressure is restored. Proper safety valve design and sizing according to codes like API 520 and 526 is critical to ensure the valve can relieve the required flow rate without overpressurizing equipment. Key parameters include pressure conditions, required flow rate, orifice area, and type of valve.
PPT on ESP
This document provides an overview of an electrostatic precipitator (ESP) used to remove dust particles from industrial exhaust gases. It discusses how ESPs work by using corona discharge to electrically charge particles, which are then attracted to oppositely charged collection plates. The document also outlines the construction of an ESP including discharge electrodes, collection plates, casing and hopper. It compares dry and wet ESP types and discusses factors that influence ESP performance such as particle size distribution and flue gas temperature.
What's hot (20)
Cembre Hexagonal Die Sets - Selection Guide For Cembre Hydraulic Crimping Tools
Cembre Hexagonal Die Sets - Selection Guide For Cembre Hydraulic Crimping Tools
Fire and Gas Detection System : Part 2_Block Diagram_Philosophy, Signal Types...
Fire and Gas Detection System : Part 2_Block Diagram_Philosophy, Signal Types...
LPG – Liquefied Petroleum Gas & Gas Detection System
LPG – Liquefied Petroleum Gas & Gas Detection System
Life Safety Code: NFPA 101, IFC 2015 & OSHA Subpart E
Life Safety Code: NFPA 101, IFC 2015 & OSHA Subpart E
Oil and Gas Industry : Datasheet for Fire and Gas Detectors.pdf
Oil and Gas Industry : Datasheet for Fire and Gas Detectors.pdf
Technology Economics: Ethylene via Ethanol Dehydration
Technology Economics: Ethylene via Ethanol Dehydration
Kingsmill - Copper Earthing, Surge Protection & Lightning Protection
Kingsmill - Copper Earthing, Surge Protection & Lightning Protection
CPD Presentation: General Principles of Smoke Control
CPD Presentation: General Principles of Smoke Control
Fundamental training on Fire Detection & Alarm System
Fundamental training on Fire Detection & Alarm System
Similar to Chapter 10
2014 WMD Sanctions Presentation
Presentation given at the Permanent Mission of Canada to the United Nations on implementation of sanctions with regard to DPRK and Iran.
Chapter 05
This document discusses various public and private support organizations that assist the fire service. It identifies national and international organizations like the American Red Cross, NFPA, and IAFC. It also describes federal organizations such as FEMA, NIOSH, and OSHA. State organizations discussed include offices of the state fire marshal and state forestry departments. Local support organizations mentioned are police, EMS, and community groups. The purpose of these organizations is to provide resources, training, legislation assistance, and support to firefighters.
Chapter 05
This document discusses various public and private support organizations that assist the fire service in the United States. It identifies national organizations like the American Red Cross, NFPA, and IAFC. It also discusses federal agencies including FEMA, OSHA, and NIOSH. Additionally, it covers state-level groups like state fire marshals and forestry departments, as well as local organizations that support fire departments through services, funding, and resources. The overall purpose is to outline the types of external groups that fire services can contact for information, training, standards, or assistance in their work.
Analise de risco npfa
The document provides instructions on beginning the hazard analysis process by identifying hazardous materials present in a community. It outlines several key data sources for the analysis, including historical records of chemicals frequently involved in releases, local incident reports, and facility directories. Material safety data sheets (MSDS) are identified as an important source of information on chemical hazards, locations, and properties. The document provides an example MSDS and explains how to use the information presented to evaluate hazards and risks.
Preparing for the Joint Commission's Hazardous Waste Management Booster Pack
Preparing for the Joint Commission's Hazardous Waste Management Booster Pack Triumvirate Environmental
The document discusses a webinar on the Joint Commission's new focus on hazardous materials and waste management in healthcare facilities. It provides an overview of the "hazardous materials booster pack" which will impact upcoming Joint Commission surveys. Experts discuss how facilities can prepare for these surveys, including ensuring proper hazardous materials inventory, spill response plans, training, disposal procedures, and documentation. A mock tracer case study demonstrates what may occur during a survey, identifying challenges and compliance with various environment of care standards. Questions from a recent survey are also presented.PSAT Presentations (1417246_1).PPT
1) Nearly 20% of all incidents reported to the Pennsylvania Emergency Incident Reporting System in 2011 were related to hazardous materials or petroleum. The document discusses preparing for and responding to environmental emergencies in Pennsylvania.
2) It outlines the relevant Pennsylvania laws around emergency management, hazardous materials, and mutual aid. This includes requirements for emergency operations plans, hazardous chemical reporting and notifications of releases.
3) The document provides guidance on identifying potential environmental hazards through publicly available databases and developing an emergency response plan to address issues around drinking water, air quality, and local resources.
DOT - Hazardous Materials Sign Resources
The Hazardous Materials Regulations (HMR) specifies requirements for the safe transportation of hazardous materials in the United States via aircraft, rail car, marine vessels, and motor vehicles. The HMR apples to all person involved in packaging, loading, and transport of hazardous materials. Definitions, classifications and transportation requirements are listed in the Hazardous Materials Table.
UNIT I STUDY GUIDEHazardous WasteCourse Learning Outcomes for Unit.docx
UNIT I STUDY GUIDEHazardous WasteCourse Learning Outcomes for Unit I
Upon completion of this unit, students should be able to:
1. Identify the primary laws that govern hazardous waste operations and discuss how they are applied in workplace situations.
2. Identify hazardous wastes using the EPA-defined characteristics of ignitibility, corrosivity, reactivity, and toxicity.
3. Identify hazardous wastes using the EPA F, K, P, and U lists.
4. Define universal wastes and describe the requirements for handling them.
5. Define the various categories of hazardous waste generators and explain the regulatory requirements that apply to each.
6. Describe the precautions for the safe handling of hazardous waste.
7. Identify and explain strategies for waste minimization.
8. Identify the considerations for selecting hazardous waste transporters and treatment storage and disposal facilities (TSDF).
9. Discuss the process and options available for the remediation of contaminated hazardous waste sites.
Reading Assignment
Forward: pp. iv-vii
Chapter 1:
Hazardous Waste
EPA Listed Wastes, 40 CFR 261.31-33: http://www.epa.gov/epa waste/hazard/wastetypes/listed.htm
Unit Lesson
BOS 3125, Hazardous Materials Management
5
(NARA, 2011a)
Here we are, ready to start a course titled “Hazardous Materials Management,” but the first course unit and first chapter in the book are titled “Hazardous Waste.” What’s that about? Isn’t hazardous waste at the end of the lifecycle and more appropriate for the end of the course? Besides, safety practitioners aren’t responsible for hazardous waste; that’s an environmental thing, right?
In order to manage hazardous materials in the workplace effectively, we need to start with the end in mind; that is, what happens to the material when we are done with it. The Resource Conservation and Recovery Act (RCRA) of 1976 introduced us to the cradle to grave” concept of hazardous materials management by focusing efforts on the final disposal of hazardous substances (Haight, 2012). The improper disposal of industrial waste over many decades had created enormous health and environmental issues, as well as a nearly insurmountable cleanup problem.
The Environmental Protection Agency (EPA) has created regulations for the cleanup of contaminated waste sites, but more importantly, has forced industries to think about the materials they use, how they are stored and handled, and how they are to be discarded when no longer needed. The escalating cost of the disposal of hazardous wastes in accordance with EPA rules has caused many industries to change to materials that are less hazardous or change processes so that hazardous materials are no longer needed. Recycling and reuse of hazardous materials has become more cost-effective than disposal. One of the goals of RCRA is to prevent
future problems caused by irresponsible waste management (Haight, 2012). This goal is being achieved by managing the full lifecycle of hazardous materials.
Sa ...
Vinyl Chloride - Hazardous Substance Fact Sheet
Vinyl chloride is a colorless gas used to make plastics that is extremely flammable and hazardous. Exposure can cause immediate effects like headaches or dizziness and long term effects like liver damage and cancer. If exposed, flush eyes and skin with water and seek medical help. People who work with vinyl chloride may need medical tests if symptoms develop or exposure is suspected. Facilities that use hazardous chemicals like vinyl chloride must report inventories and releases under federal and state Right to Know laws to help communities prepare for and respond to potential chemical emergencies.
24_Hour_Hazwoper.ppt
This document provides an agenda and overview for a 24-hour hazardous waste operations training. The training covers regulations, hazard recognition, toxicology, engineering controls, personal protective equipment, medical surveillance, monitoring, decontamination, safe work practices, confined spaces, drum handling, transportation and emergency procedures over three days. Key topics include OSHA regulations, the HAZWOPER standard, site characterization, safety programs, identification and assessment of chemical and radiological hazards, and proper use of personal protective equipment. The training aims to ensure workers can safely handle hazardous waste in compliance with environmental laws and regulations.
24_Hour_Hazwoper (1556161616161681861).ppt
This document provides an agenda and overview for a 24-hour hazardous waste operations training. The training covers regulations, hazard recognition, toxicology, engineering controls, personal protective equipment, medical surveillance, monitoring, decontamination, safe work practices, confined spaces, drum handling, transportation and emergency procedures over three days. Key topics include OSHA regulations, the HAZWOPER standard, site characterization, control programs, identification and assessment of chemical and radiological hazards. The goal is to train workers on safely handling hazardous waste.
Hazwoper hazardous waste site 40 hour student initial course manual
This document provides a summary of a 40-hour hazardous waste site training course. The course covers health and safety regulations, hazard recognition and control, monitoring instruments, toxicology, respiratory protection, protective equipment, site entry procedures, decontamination, and safety planning. It is intended to train personnel working at hazardous waste sites to meet OSHA requirements. The course uses a student training handbook to provide overviews of key topics and serve as a reference for developing health and safety programs.
International Nuclear and Radiological Event Scale (INES) - 12 April 2011
International Nuclear and Radiological Event Scale (INES) - 12 April 2011International Atomic Energy Agency
The International Nuclear Event Scale (INES) provides criteria for rating events associated with radioactive material to communicate their safety significance to the public. INES ratings are based on three criteria: impact on people and the environment, radiological barriers and controls, and degradation of defense in depth protections. Higher level events involve more significant radioactive releases or damage to fuel and barriers. The defense in depth strategy uses multiple layers of safety systems so that failure of one is compensated by others to prevent harm.Nanotechnology in Consumer Products: An Update on Regulatory Responses and Li...
The document provides an overview of regulatory developments and potential litigation related to nanotechnology in consumer products. It discusses the National Nanotechnology Initiative and efforts by agencies like EPA, FDA, and NIOSH to research and potentially regulate nanomaterials. While no human health impacts have been proven yet, some animal studies suggest risks from exposure. No legal cases involving nanomaterial injuries have occurred so far. Continued research is needed to understand impacts and inform regulation.
risk analysis
This document provides definitions and information related to risk analysis. It defines key terms like hazard, risk, risk analysis, risk assessment, and reliability. It discusses various quantitative and qualitative methods for risk analysis including fault tree analysis, failure mode and effects analysis, and hazard and operability studies. Failure rate data for some process components is also presented. The document provides an overview of important concepts in quantitative risk analysis including reliability, mean time between failures, and interaction between equipment for series and parallel systems. Overall it serves as a reference on the topic of risk analysis, defining key terms and outlining various approaches.
NatureNanotechnology2011
Regulators from the US EPA, European Commission, and OECD discuss the role of science in informing nanotechnology decisions. Science helps identify hazards, exposures, and risks to inform whether nanomaterials can be used safely. Testing requires characterization of nanomaterials and consideration of potential exposures and transformations throughout their lifecycles. Regulators worldwide are working to generate data on nanomaterials through voluntary and mandatory programs to make responsible decisions about their development and use.
Chapter 10
The document describes the key activities and organization of a typical fire prevention bureau. It discusses that fire prevention bureaus perform inspections, public education, and enforcement of fire codes. Larger bureaus may have a chief of prevention as the head, while smaller departments may have a company officer in charge. Bureaus work to prevent fires through education, engineering, and enforcement activities like inspections and investigating fire causes. The overall goal is to gain voluntary compliance and keep people and property safe from fire.
Chapter 10
The document describes the key activities and organization of a typical fire prevention bureau. It discusses that fire prevention bureaus perform inspections, public education, and enforcement of fire codes. Larger bureaus may have a chief of prevention as the head, while smaller departments may have a company officer in charge. Bureaus aim to prevent fires through hazard identification, education, and ensuring fire safety systems are properly installed and maintained. Their goals are to reduce loss of life and property from fires.
Berkeley Class 2009 Final
The document discusses the history and current state of chemicals policy and regulation in the European Union, specifically the REACH regulation. It provides background on the development of EU chemicals legislation over time, from early directives on classification and labeling in the 1960s to the adoption of the REACH regulation in 2006. It describes the key elements and objectives of REACH including registration, evaluation, authorization and restrictions for chemicals. It also discusses the role of the European Chemicals Agency and provides an overview of the implementation of REACH to date.
The Fire and Rescue Service Books is a guidance for organize a safe system of...
Operational guidance for incidents involving hazardous material.
In everyday language "hazardous materials" means solids, liquids, or gases that can wound people, other living organisms, or damage property, or the environment. They not only include materials that are toxic, radioactive, flammable, explosive, corrosive, oxidizers, asphyxiates, biohazards, pathogen or allergen substances and organisms, but also materials with physical conditions or other characteristics that render them hazardous in specific circumstances, such as compressed gases and liquids, or hot/cold materials.
The Department for Communities & local Government, with collaboration of CFRA (Chief Fire & Rescue Adviser) publish in 2012 an interesting guideline for a bettere organization of the incident ground, following safe and correct procedure. The target of this operational guidance, about the "incident involving hazardous materials" is to provide an unvaried approach for common operational practices. This simple rules could give a better explanation about the interoperability between fire and rescue services, other emergency responders, industry experts and other relevant groups. These common principles, practices and procedures are intended to support the development of safe systems of work on the incident ground and to enhance national resilience.
This book promotes and enhance good practice within the Fire and Rescue Service and is offered as a current industry standard. It is envisaged that this will help establish high standards of efficiency and safety in the interests of employers, employees and the general public.
The Guidance, which is compiled using the best sources of information known at the date of issue, is intended for use by competent persons. The application of the guidance does not remove the need for appropriate technical and managerial judgement in practical situations with due regard to local circumstances, nor does it confer any immunity or exemption from relevant legal requirements, including by-laws.Those investigating compliance with the law may refer to this guidance as illustrating an industry standard.
This book could contain interesting suggestion that could interest also Firefighters, first responder and EMS from different country, wich not follow law, guidelines or practices from United Kingdom or Commonwealth Countries.
Major incidents involving hazardous materials in the United Kingdom are rare. Such incidents place significant demands on local fire and rescue services and often require resources and support from other fire and rescue services and emergency responders.
However smaller scale incidents involving hazardous materials are more prevalent and these may require a response from any fire and rescue service in England.
The Fire and Rescue Service Operational Guidance – Incidents involving hazardous materials provid
Similar to Chapter 10 (20)
Preparing for the Joint Commission's Hazardous Waste Management Booster Pack
Preparing for the Joint Commission's Hazardous Waste Management Booster Pack
UNIT I STUDY GUIDEHazardous WasteCourse Learning Outcomes for Unit.docx
UNIT I STUDY GUIDEHazardous WasteCourse Learning Outcomes for Unit.docx
Hazwoper hazardous waste site 40 hour student initial course manual
Hazwoper hazardous waste site 40 hour student initial course manual
International Nuclear and Radiological Event Scale (INES) - 12 April 2011
International Nuclear and Radiological Event Scale (INES) - 12 April 2011
Nanotechnology in Consumer Products: An Update on Regulatory Responses and Li...
Nanotechnology in Consumer Products: An Update on Regulatory Responses and Li...
The Fire and Rescue Service Books is a guidance for organize a safe system of...
The Fire and Rescue Service Books is a guidance for organize a safe system of...
More from snoshoesam
Chapter 14
The document discusses emerging fire protection technologies including building information modeling platforms that allow data sharing, computer fire modeling to understand fire spread, and performance-based design approaches. New detection methods like video cameras and gas/particulate analysis are presented. Mass notification, multipurpose piping systems, variable speed fire pumps, compressed air foam systems, and aerosol suppression systems are emerging technologies aimed to improve fire detection, control, and suppression.
Chapter 13
This document discusses property security, emergency response, and fire protection systems. It covers means of egress requirements, including the three parts of egress and requirements for exit stairway doors. It also describes delayed egress locks and access controlled doors. The document outlines emergency building entrance systems and different methods for emergency responders to access property through security gates and barriers, such as siren sensors, access keys, codes and radio signals. Maintaining means of egress and balancing security and emergency access is important.
Chapter 12
Smoke control and management systems aim to contain smoke and toxic gases to the area of origin using three main methods: containment, exhaust, and opposed airflow. Key goals are to prevent smoke from spreading and to maintain tenable conditions for evacuation. Systems often integrate with fire protection, HVAC, and other building systems. Proper design, installation, and regular acceptance testing are important to ensure effective operation.
Chapter 11
Portable fire extinguishers are intended to quickly suppress small fires. They contain a fixed amount of suppression agent and require trained operators for effective use. Three common types are pumped, stored pressure, and cartridge pressure extinguishers, which use different mechanisms to expel agents matched to specific fire classes, such as water, foam, dry chemicals, or carbon dioxide. Regular inspection, maintenance, and hydrostatic testing are necessary to ensure extinguishers are in proper working order.
Chapter 09
Wet and dry chemical fire extinguishing systems provide alternatives to water-based systems. Wet systems use water-based proprietary agents while dry systems use pressurized gas to distribute solid particle agents. Both systems undergo acceptance testing upon installation and periodic inspection, testing, and maintenance is required to ensure proper operation. Major components include agent storage containers, expelling gas cartridges, piping and fittings, nozzles, and activation devices.
Chapter 08
There are different types of fire alarm and detection systems based on factors like occupancy, building characteristics, and technology. Modern systems use addressable technology and intelligent software while older systems relied on conventional technology. Fire alarm systems are classified by NFPA 72 based on how they operate, monitor signals, and report events. Proper installation, inspection, testing and maintenance are required to ensure reliability and prevent false alarms.
Chapter 07
Fire alarm systems serve several important functions: notifying occupants of fire conditions, notifying first responders, signaling other onsite and offsite locations, signaling other building systems, and providing information to first responders. They are comprised of various components like control panels, power sources, initiating devices, and notification appliances. Initiating devices can be manual pull stations or automatic detectors like heat, smoke, and gas detectors. Notification appliances produce audible alarms through devices like horns, speakers, or bells and visible alarms through flashing lights or strobes. Different types of alarm signals include fire alarms, supervisory signals for other system issues, and trouble signals for problems in the system.
Chapter 06
This document discusses specialized water-based fire protection systems as alternatives to standard sprinkler systems. It describes fixed foam, water spray, foam-water, and water mist systems, noting their components, applications, and inspection requirements. These systems provide targeted protection for hazards where sprinklers would be inadequate, such as flammable liquid storage, using methods like foam application or ultra-fine water mist. Proper design, installation, and maintenance are needed to ensure effective performance.
Chapter 05
This document summarizes different types of automatic fire sprinkler systems. It describes wet pipe, dry pipe, pre-action, and deluge systems, explaining their components, design concepts, and applications. The document emphasizes that sprinkler systems are effective for both property protection and life safety when fires occur. Regular inspection, testing and maintenance are required to ensure systems function properly.
Chapter 04
Standpipe and hose systems are required in buildings based on height, area, occupancy, and hazards. NFPA 14 establishes standards for standpipe classifications, types, components, and testing. Regular inspection and testing is essential to ensure standpipe systems will operate properly in an emergency.
Chapter 03
The document discusses water supply systems for fire protection. It describes the components of source/supply networks like water sources, intake, pumping and distribution networks including storage, mains and laterals. It also discusses the difference between public municipal systems and private systems, and types of supply systems like gravity, pumped and combined. It covers factors like pressure, flow and duration that impact water-based fire protection.
Chapter 02
Building and fire codes provide uniform standards to maintain public safety. Model codes, such as those developed by the ICC and NFPA, are adopted by governments and provide minimum requirements. These codes reference other standards and may be amended. The model code development process involves public participation and consensus to establish requirements for fire protection systems based on occupancy hazards and risks.
Chapter 01
The document discusses the basics of fire behavior including:
1) The fire triangle/tetrahedron which depicts the relationship between fuel, heat, and oxygen/chemical chain reaction required for combustion.
2) The different classes of fire (A-K) and their corresponding extinguishing agents.
3) The five types of fires - diffusion, smoldering, spontaneous combustion, self-heating, and premixed flame.
4) The five stages of fire - pre-ignition, ignition, growth, fully developed, and decay.
Chapter 10
This document describes different types of gaseous fire extinguishing systems including carbon dioxide, halons, and clean agents. Carbon dioxide works by displacing oxygen and forming a fog-like cloud to extinguish fires. Halons break down the chemical reaction of fire and were commonly used but are no longer manufactured due to environmental concerns. Clean agents like inert gases are environmentally safe alternatives to halons that effectively extinguish Class A, B, and C fires without leaving residues. All gaseous systems require regular inspection, testing and maintenance to ensure proper operation.
Chapter 13
The document discusses several key aspects of public financial management and budgeting for fire prevention programs. It describes the purpose of public budgets as supplying information to elected officials and the public about government programs and establishing spending policies. It distinguishes between operating budgets, which fund day-to-day expenses, and capital budgets, which fund long-term projects. It also discusses different budget formats, the importance of developing fee structures based on recovery of costs for specific services, and having financial management processes in place to ensure accountability.
Chapter 12
This document discusses personnel considerations for fire prevention bureaus. It notes that bureaus are often made up of a combination of uniformed firefighters and civilian specialists. Uniformed staff bring fire service experience while civilians have specific skills and education. The document emphasizes that training and certification are critical for all positions, and it outlines various national standards and certifying organizations. Retention of qualified staff is also highlighted as important for an effective fire prevention program.
Chapter 11
Fire prevention records generated by government agencies are considered public records and subject to freedom of information laws. These records must be retained according to state-mandated schedules and are generally stored using an information management system. When developing an electronic records system, fire bureaus must carefully consider their operational needs, legal requirements, and ensure the system can integrate with standard procedures. Proper planning and implementation of a records system is crucial to the effective functioning of a fire prevention program.
Chapter 10
This document discusses the importance of public fire safety education and planning effective education programs. It outlines key aspects of developing programs including using local fire statistics to identify target audiences, designing messages tailored to those audiences, implementing programs, and evaluating their effectiveness in changing behaviors. The document also highlights the role of the media, schools, and public hearings in disseminating fire safety messages to various groups.
Chapter 8
Fire prevention bureaus have taken on additional functions beyond traditional fire prevention due to their relevant expertise in areas like construction, hazardous materials, and emergency response. These expanded roles can benefit public safety but also risk distracting from the core mission of fire prevention. Key expanded roles discussed include construction code enforcement, property maintenance inspections, investigating hazardous waste and vacant building issues, and assisting with homeland security and civil defense.
Chapter 7
This document discusses the importance of testing fire protection systems to ensure reliability. It describes how unreliable systems can negatively impact public safety and businesses. The document emphasizes that proper design, equipment, installation, and maintenance are necessary for reliability. It also explains that acceptance tests after installation, along with regular inspections and retests, are required by fire codes to maintain system integrity over time.
More from snoshoesam (20)
Recently uploaded
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Discover the Beauty and Functionality of The Expert Remodeling Service
Unlock your kitchen's true potential with expert remodeling services from O'Brien Group Inc. Transform your space into a functional, modern, and luxurious haven with their experienced professionals. From layout reconfiguration to high-end upgrades, they deliver stunning results tailored to your style and needs. Visit obriengroupinc.com to elevate your kitchen's beauty and functionality today.
Pro Tips for Effortless Contract Management
Tired of chasing down expiring contracts and drowning in paperwork? Mastering contract management can significantly enhance your business efficiency and productivity. This guide unveils expert secrets to streamline your contract management process. Learn how to save time, minimize risk, and achieve effortless contract management.
Kanban Coaching Exchange with Dave White - Example SDR Report
Slides from the June 2024 Kanban Coaching Exchange with Dave White. He talked about the Service Delivery Review.
一比一原版(lbs毕业证书)英国伦敦商学院毕业证如何办理
原版一模一样【微信：741003700 】【(lbs毕业证书)英国伦敦商学院毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(lbs毕业证书)英国伦敦商学院毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(lbs毕业证书)英国伦敦商学院毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(lbs毕业证书)英国伦敦商学院毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(lbs毕业证书)英国伦敦商学院毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
20240609_ TJ Communications Credentials.pdf
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions. 𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢2024 GROUNDBREAKING CEREMONY OF SK LEAVEO PLANT
➢2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢2024 CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
➢ Daewon Pharm Year End Party
➢ Giant Lantern Festival in Ha Noi with Gamuda Land
➢ Light Festival 2019 in HCMC with Phu My Hung Corp
(etc)
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
Revolutionizing Surface Protection Xlcoatings Nano Based Solutions
Excelcoating Transforming surface protection with their cutting-edge, eco-friendly nano-based coatings. This presentation delves into their innovative product lineup, including Excel CoolCoat for roof cooling, Excel NanoSeal for cement surfaces, Excel StayCool for UV-filtering glass, Excel StayClean for solar panels, Excel CoolTile for heat-reflective tiles, and Excel InsulX for film insulation.
Enhancing Adoption of AI in Agri-food: Introduction
Introduction to the Panel on: Pathways and Challenges: AI-Driven Technology in Agri-Food, AI4Food, University of Guelph
“Enhancing Adoption of AI in Agri-food: a Path Forward”, 18 June 2024
L'indice de performance des ports à conteneurs de l'année 2023
Une évaluation comparable de la performance basée sur le temps d'escale des navires
L'objectif de l'ICPP est d'identifier les domaines d'amélioration qui peuvent en fin de compte bénéficier à toutes les parties concernées, des compagnies maritimes aux gouvernements nationaux en passant par les consommateurs. Il est conçu pour servir de point de référence aux principaux acteurs de l'économie mondiale, notamment les autorités et les opérateurs portuaires, les gouvernements nationaux, les organisations supranationales, les agences de développement, les divers intérêts maritimes et d'autres acteurs publics et privés du commerce, de la logistique et des services de la chaîne d'approvisionnement.
Le développement de l'ICPP repose sur le temps total passé par les porte-conteneurs dans les ports, de la manière expliquée dans les sections suivantes du rapport, et comme dans les itérations précédentes de l'ICPP. Cette quatrième itération utilise des données pour l'année civile complète 2023. Elle poursuit le changement introduit l'année dernière en n'incluant que les ports qui ont eu un minimum de 24 escales valides au cours de la période de 12 mois de l'étude. Le nombre de ports inclus dans l'ICPP 2023 est de 405.
Comme dans les éditions précédentes de l'ICPP, la production du classement fait appel à deux approches méthodologiques différentes : une approche administrative, ou technique, une méthodologie pragmatique reflétant les connaissances et le jugement des experts ; et une approche statistique, utilisant l'analyse factorielle (AF), ou plus précisément la factorisation matricielle. L'utilisation de ces deux approches vise à garantir que le classement des performances des ports à conteneurs reflète le plus fidèlement possible les performances réelles des ports, tout en étant statistiquement robuste.
2024.06 CPMN Cambridge - Beyond Now-Next-Later.pdf
Slides presented by Phil Hornby, Founder and Director of "for product people", at Cambridge Product Management Network, on Monday 17th June 2024.
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Tesla Energy rEVolution And The Golden Age For Copper: Kirill Klip GEM Royalty TNR Gold Copper Presentation
Kalyan Chart Satta Matka Dpboss Kalyan Matka Results
KALYAN CHART SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Unlocking WhatsApp Marketing with HubSpot: Integrating Messaging into Your Ma...
50 million companies worldwide leverage WhatsApp as a key marketing channel. You may have considered adding it to your marketing mix, or probably already driving impressive conversions with WhatsApp.
But wait. What happens when you fully integrate your WhatsApp campaigns with HubSpot?
That's exactly what we explored in this session.
We take a look at everything that you need to know in order to deploy effective WhatsApp marketing strategies, and integrate it with your buyer journey in HubSpot. From technical requirements to innovative campaign strategies, to advanced campaign reporting - we discuss all that and more, to leverage WhatsApp for maximum impact. Check out more details about the event here https://events.hubspot.com/events/details/hubspot-new-delhi-presents-unlocking-whatsapp-marketing-with-hubspot-integrating-messaging-into-your-marketing-strategy/
8328958814KALYAN MATKA | MATKA RESULT | KALYAN
8328958814KALYAN MATKA | MATKA RESULT | KALYAN KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA
Adani Group's Active Interest In Increasing Its Presence in the Cement Manufa...
Time and again, the business group has taken up new business ventures, each of which has allowed it to expand its horizons further and reach new heights. Even amidst the Adani CBI Investigation, the firm has always focused on improving its cement business.
❽❽❻❼❼❻❻❸❾❻ DPBOSS NET SPBOSS SATTA MATKA RESULT KALYAN MATKA GUESSING FREE KA...
DPBOSS NET SPBOSS SATTA MATKA RESULT KALYAN MATKA GUESSING FREE KALYAN FIX JODI ANK LEAK FIX GAME BY DP BOSS MATKA SATTA NUMBER TODAY LUCKY NUMBER FREE TIPS ...
Recently uploaded (20)
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Discover the Beauty and Functionality of The Expert Remodeling Service
Discover the Beauty and Functionality of The Expert Remodeling Service
Kanban Coaching Exchange with Dave White - Example SDR Report
Kanban Coaching Exchange with Dave White - Example SDR Report
Revolutionizing Surface Protection Xlcoatings Nano Based Solutions
Revolutionizing Surface Protection Xlcoatings Nano Based Solutions
Enhancing Adoption of AI in Agri-food: Introduction
Enhancing Adoption of AI in Agri-food: Introduction
L'indice de performance des ports à conteneurs de l'année 2023
L'indice de performance des ports à conteneurs de l'année 2023
2024.06 CPMN Cambridge - Beyond Now-Next-Later.pdf
2024.06 CPMN Cambridge - Beyond Now-Next-Later.pdf
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Kalyan Chart Satta Matka Dpboss Kalyan Matka Results
Kalyan Chart Satta Matka Dpboss Kalyan Matka Results
Unlocking WhatsApp Marketing with HubSpot: Integrating Messaging into Your Ma...
Unlocking WhatsApp Marketing with HubSpot: Integrating Messaging into Your Ma...
Adani Group's Active Interest In Increasing Its Presence in the Cement Manufa...
Adani Group's Active Interest In Increasing Its Presence in the Cement Manufa...
❽❽❻❼❼❻❻❸❾❻ DPBOSS NET SPBOSS SATTA MATKA RESULT KALYAN MATKA GUESSING FREE KA...
❽❽❻❼❼❻❻❸❾❻ DPBOSS NET SPBOSS SATTA MATKA RESULT KALYAN MATKA GUESSING FREE KA...
Chapter 10
- 1. Hazardous Materials and Warning Systems Chapter 10
- 11. National Fire Protection Association System (cont’d.) Figure 10-1 Example of a NFPA 704 hazard warning placard used for fixed facilities Figure 10-2 NFPA placard
- 13. NFPA Placard Identification System
- 25. Radioactive Materials Advantages and Disadvantages (cont’d.) Figure 10-7 Radiation protective clothing for firefighters