The process of transformation of a substance from liquid to solid state in which the crystal lattice forms and crystals appear.
•Volume shrinkage or volume contraction
The process of transformation of a substance from liquid to solid state in which the crystal lattice forms and crystals appear.
•Volume shrinkage or volume contraction
Constitution of alloys – Solid solutions, substitutional and interstitial – phase diagrams, Isomorphous, eutectic, eutectoid, peritectic, and peritectoid reactions, Iron – carbon equilibrium diagram. Classification of steel and cast Iron microstructure, properties and application.
UNIT - I ---CONSTITUTION OF ALLOYS.pptxShanmathyAR2
CONSTITUTION OF ALLOYS
Constitution of alloys – Solid solutions, substitutional and interstitial – phase diagrams, Lever rule, Isomorphous, eutectic, eutectoid, peritectic and peritectoid reactions, Iron – Iron carbon equilibrium diagram – Classification of steels and cast irons, microstructure, properties and applications – Ferrite and austenite stabilizers.
Crystal Material, Non-Crystalline Material, Crystal Structure, Space Lattice, Unit Cell, Crystal Systems, and Bravais Lattices, Simple Cubic Lattice, Body-Centered Cubic Structure, Face centered cubic structure, No of Atoms per Unit Cell, Atomic Radius, Atomic Packing Factor, Coordination Number, Crystal Defects, Point Defects, Line Defects, Planar Defects, Volume Defects.
work measurement, the uses of work measurement, the techniques of work measurement, time study, time study form, methods of timing, work sampling, allowances, predetermined motion time and systems (P.M.T.S.),
Method Study, Objective of method study, Pre-requisites for method study, Steps/basic procedure in method study, different method recording techniques,
Definition of Productivity, Measurement of productivity, benefits of productivity, the role of management, government and labour to improve the productivity, factors affecting the productivity
Production Planning and Control, Objective of production planning and control, Function of PPC, Types of the Production Systems, Process Planning, Sales Forecasting, Sequencing, Loading, and Scheduling, Line of Balance, Progress control, Economic Order Quantity (EQC), Goods Service Tax (GST)
Site Selection, nature of the location, Factors affecting the location, Selection of the location, Importance of the plant location, choice of site for selection, Gov policies on decentralization, Industrial estates, Comparision of location, Plant layout, Principles of Plant Layout, Objective of Plant Layout, Flow pattern, Technique used in plant layout, Sample of different layout
Introduction to generalized measurement system, primary sensing element, data conversion element, data transfer element, manipulation element, data presentation element, the functional element of bourdon tube pressure gauge, the functional element of the pressure-actuated thermometer, static characteristics of instruments, dynamic characteristics of instruments
Standards of measurement, Historical developments of standards of measurements, material length standard, international yard, international prototype meter, Lightwave or optical length standards, primary standards, secondary standards, tertiary standards, working standards, line standards, end standards,
Definition of Metrology, Scientific or fundamental metrology, Applied or Industrial Metrology, Legal Metrology, Need of Inspection, Process of Measurement, Direct measurement, indirect measurement, Primary, Secondary and Tertiary Measurement, Instruments and Classification of Instruments, selection of measuring instruments,
Automobile Brakes, Functions of Brakes, Requirements of a good braking system, Types of Brakes, Mechanical Brakes, Internal Expanding Brake, Hand Brake, Disk Brake, Hydraulic Brake, Power Brakes, Air Brake, Air-Hydraulic Brake, Vacum Brake, Exhaust Brake, Electric Brake, Antilock Braking System (ABS), Brake Effectiveness
Safety in automobile, requirements of safety in automobile, airbags, seat belt, working of airbags, working of seat belts, radio ranging (radar), night vision, GPS, Emergency braking system, auto-dimming mirrors, heads up display, back up sensing system, energy-absorbing steering system.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
2. Introduction
• The “Grain Structure” of a material shows shape and size of the grains
(crystals) which form the bulk material.
• It is characterized by grain boundaries, grain shape and grain size.
• There are different types of grains such as columnar, dendritic, equiaxed
or a combination of these types.
• Grain type can be controlled by controlling nucleation and growth
phenomena which occur during solidification of the liquid metal.
• To understand the microstructure of single and multiphase solids and
conditions required to improve their properties by changing micro-
structure thermodynamically, one needs to understand the phase
diagrams and phase transformations.
3. Introduction
System
• Thermodynamically, a system is an isolated body of matter which is under study.
• More precisely, a system can be defined as a substance or a group of substances so
isolated from its surroundings that it is totally unaffected by the surroundings but
changes in its overall composition, temperature, pressure or total volume can be
allowed as per the desire of the person who investigates it.
• A system may contain solids, liquids, gases or their combination.
• It may have metals or non-metals separately or in combined form.
4. Introduction
Phase
• A phase is a substance or a portion of matter which is homogenous, physically distinct
and mechanically separable.
• It is homogenous in the sense that its two smallest parts cannot be distinguished
(identified differently) from one another.
• Physically distinct and mechanically separable means that the phase will have a
definite boundary surface.
• A phase can exist in three different states of vapour, liquid or solid depending upon
pressure and temperature. Different phases are given different names or symbols like
α (alpha),ß (Beta), γ (Gamma), etc.
5. Introduction
Equilibrium :
• Equilibrium in a system is the state of minimum free energy under any specified
combination of overall composition, temperature, pressure and overall volume.
• Once equilibrium is achieved, even a minor change in these parameters of
composition, temperature, pressure, volume or state of any substance within the
system means an increase in free energy.
Degrees of Freedom:
• It is also known as variance of system.
• It is defined as number of external or internal factors of the system (temperature,
pressure and concentration) that can be independently changed without altering
equilibrium i.e. without causing disappearance of a phase or formation of a new phase
in the system.
6. Introduction
Structural Constituent
• Phase distribution in a system is not necessarily uniform throughout the structure.
• These phases are associated in different ways to form the structure. This association of
phases in a recognizably distinct fashion is referred to as “structural constituent” of the
alloy.
7. Cooling Curves
• A method, to determine the
temperatures at which phase
changes (Liquid to Solid or Solid
to Liquid) occur in an alloy
system, consists of following the
temperature as a function of time
as different alloys in the system
are very slowly cooled.
• The data obtained in this manner
from a cooling curve for each of
the alloys.
Cooling curves for (a) Pure metal or compound (b) Binary solid
solution (c) Binary eutectic system
9. Interpretation of Phase Diagrams
The following three conclusions
are the rules necessary for the
interpreting phase diagrams:
1. The phases that are present.
2. The chemical composition of
each phase.
3. The lever Rule (the amount of
each phase).
10. Gibbs Phase Rule
• Gibbs Phase Rule establishes the
relationship between the
number of degree of freedom
(F), the number of components
(C), and the number of phases
(P). It is expressed
mathematically as follows:
P + F = C + 2
11. Classification of Equilibrium Diagrams
• Equilibrium diagrams may be classified according to the relation of the
components in the liquid and solid states as follows:
1. Components completely soluble in the liquid state,
a) and also completely soluble in the solid state,
b) but partly soluble in the solid state (Eutectic Reaction).
c) but insoluble in the solid state (Eutectic Reaction).
d) the Peritectic reaction
2. Components partially soluble in the liquid state,
a) but completely soluble in the solid state.
b) and partly soluble in the solid state.
3. Components completely insoluble in the liquid state and completely
insoluble in the solid state.
13. Eutectic System
In an eutectic reaction, when a liquid solution of fixed composition,
solidifies at a constant temperature, forms a mixture of two or more solid
phases without an intermediate pasty stage. This process reverses on
heating.
Liquid Solid 1 + Solid 2
Cooling
Heating
Solid 1 + Solid 2
Liquid
14. Eutectic System
In eutectic system, there is
always a specific alloy,
known as eutectic
composition, that freezes at
a lower temperature than
all other compositions.
15. The Bismuth-Cadmium Equilibrium Diagram
Two metals completely soluble in
the liquid state but completely
insoluble in the solid state.
In eutectic system, there is always
a specific alloy, known as eutectic
composition, that freezes at a
lower temperature than all other
compositions.
17. The Tin-Lead Equilibrium Diagram
• Tin will dissolve up to maximum of 2.6 % Pb at eutectic temperature,
forming the solid solution α.
• Lead will dissolve up to a maximum of (100 – 80.5), i.e., 19.5 % tin at the
eutectic temperature, giving the solid solution β.
• Slope of BA and CD indicate that the solubility of Pb in Sn (α) and that of
Sn in Pb (β) decreases as temperature falls.
21. Allotropy
• Iron is a relatively soft and ductile material.
• Iron has melting point of 1539 °C.
• Iron is allotropic metal, which means that it exists in more than one type
of lattice structure (e.g., BCC/FCC) depending upon temperature.
• At room temperature iron is BCC lattice arrangement, where as 908 °C it
changes to FCC and then at 1403 °C back to BCC again and vice versa.
• At 770 °C called the curie point
23. Micro – Constitutes of Iron and Steel
• When steel is heated above the austenitic temperature and is allowed to
cool under different conditions, the austenite in steel transforms into
variety of microconstituents.
• The study of these microconstituents is essential in order to understand
Fe-C equilibrium diagram and T. T. T. diagrams.
• Various micro – constituents are:
1. Austenite
2. Cementite
3. Pearlite
4. Martensite
5. Sorbite
6. Ferrite
7. Ledeburite
8. Bainite
9. Troostite
24. Micro – Constitutes of Iron and Steel
1. Austenite
• Austenite is the solid solution of carbon and/or other alloying elements (e.g., Mn, Ni,
etc.) in gamma iron.
• Carbon is in interstitial solid solution whereas Mn, Ni, Cr, etc., are in substitutional
solid solution with iron.
• Austenite can dissolve maximum 2% carbon at 1130 °C.
• Austenite has:
• Tensile strength 10500 𝑘𝑔/𝑐𝑚2
.
• Elongation 10% in 50 mm.
• Hardness Rockwell C 40 (Approx.)
• Austenite is normally not stable at room temperature.
• Austenite is non-magnetic and soft.
25. Micro – Constitutes of Iron and Steel
2. Ferrite
• Ferrite is B.C.C. iron phase with very limited solubility for carbon.
• The maximum solubility is 0.025 % carbon at 723 °C and it dissolves only 0.008%
carbon at room temperature.
• Ferrite has:
• Tensile strength 2800 𝑘𝑔/𝑐𝑚2
(Approx.)
• Elongation 40% in 50 mm.
• Hardness less than Rockwell C 0 or Rockwell B 90
26. Micro – Constitutes of Iron and Steel
3. Cementite
• Cementite or iron carbide, chemical formula Fe3C, contains 6.67% carbon by weight.
• It is typical hard and brittle interstitial compound of low tensile strength (approx. 350
𝑘𝑔/𝑐𝑚2) but high compressive strength.
• Cementite is the hardest structure that appears on the iron-carbon equilibrium
diagram. Its crystal structure is orthorhombic.
4. Ledeburite
• Ledeburite is the eutectic mixture of austenite and cementite. It contains 4.3% carbon.
It is formed at about 1130 °C (2065 °F)
27. Micro – Constitutes of Iron and Steel
5. Pearlite
• The perlite microstructure consists of alternate lamellae of ferrite and cementite.
• Pearlite is the product of austenite decomposition by eutectoid reaction; thus pearlite
is eutectoid mixture containing about 0.8% carbon and is formed at 1333 °F (723 °C).
• Perlite has
• Elongation 20% in 50 mm.
• Hardness Rockwell C 20.
6. Bainite
• Bainite is the constituent produced in a steel when austenite transforms at a
temperature below that at which perlite is produced and above that at which
martensite is formed.
• Bainite is an isothermal transformation product and cannot be produced by
continuous cooling.
28. Micro – Constitutes of Iron and Steel
7. Martensite
• Martensite is a metastable phase of steel, formed by transformation of austenite
below the Ms temperature.
• Martensite is an international supersaturated solid solution of carbon in alpha iron and
has a Body Centered Tetragonal Lattice.
• Martensite, normally, is a product of quenching.
• Martensite possesses an acicular or needle-like structure.
8. Troostite
• Troostite (Nodular) is a mixture of radial lamellae of ferrite and cementite.
• In steel heat treatment, the troostite, i.e. the microstructure, consisting of ferrite and
finely divided cementite is produced on tempering martensite below approximately
450 °C.
29. Micro – Constitutes of Iron and Steel
9. Sorbite
• Sorbite is the microstructure consisting of ferrite and finely divided cementite,
produced on tempering martensite above approximately 450 °C.
• The constituent also known as Sorbite Pearlite, is produced by the decomposition of
austenite when cooled at a rate slower than that which will yield a troostitic structure
and faster than that which will produce a pearlitic structure.
30. Micro – Constitutes of Iron and Steel
α or Ferrite γ or Austenite
Ferrite + Cementite or
a+Fe3C or
Pearlite
Fe3C or Cementite
Austenite + Cementite or
γ +Fe3C or
Ledeburite
31.
32. T. T. T. Diagram
• T.T.T. (Time – Temperature – Transformation) diagram is also known as S Curve, C
Curve, Bain’s Curve or Isothermal Transformation diagram.
• T.T.T. diagram is used more particularly in the assessment of decomposition of
austenite in a heat treatable steel.
• The principal source of transformation on the actual process of austenite
decomposition under non equilibrium conditions is the T.T.T. diagram, which related
the transformation of austenite to the time and temperature conditions to which it is
subjected.