aix installed via nim

1. AIX INSTALLATION VIA NIM SERVER
HMC ( Hardware Managemnet Console )
 Power on HMC .
 HMC user id : hscroot
 Password: abc123
HMC IPs set :
 192.168.1.101
 192.168.2.101
 192.168.3.101
 192.168.4.101
Power Server AIX IPs:
 HMC Port 1 : 192.168.2.147
 HMC Port 2 : 192.168.3.147
REMOTE CONNECTION THROUGH ETHERNET :
 HMC set IPs and ping to Power server AIX IPs.
Test IP : 192.168.2.147 / 192.168.3.147
 You connect through Ethernet to Power server AIX port 1 so you add IP 192.168.2.147 in HMC .
 Then IP Ping to HMC and Server from selected IP 192.168.2.147
 IPs is ping and create connection to Power server AIX and HMC .
LPAR CREATION :
 Power Server AIX connect to HMC.
 Then next step through HMC you create LPAR in Power server AIX .
 Following steps to create LPAR .

2. STEP 1.
STEP 2.
STEP 3.

3. STEP 4.
STEP 5.

4. STEP 6.
STEP 7.

5. STEP 8.
STEP 9.

6. STEP 10.
STEP 11.

7. AIX INSTALLATION
 Enter console window option show black screen now put the command
#smitty
 Boot AIX media and start AIX installation .
 Following steps to install AIX in Power server .
STEP 1.
#smitty

8. STEP 2.
Select Boot Options
STEP 3.
Select Install/Boot Device

9. STEP 4.
CD/DVD
STEP 5.
SATA Drive

10. STEP 6.

11. STEPS 7 .
Press any key to continue Aix Installation
SSH ENABLE :
 Putt command
#smitty .
NIM configuration under AIX6.1
NIM CONFIGURATION :
 Installing AIX 6.1 OS in NIM master server.
 Install bos.sysmgt.nim filesets, which is needed for NIM master.
 Configure NM master server.
 #smitty
STEP 1.
#smitty

12. STEP 2.

13. STEP 3.
STEP 4.

14. STEP 5.
STEP 6.

15. STEP 7.
STEP 8.

16. STEP 9.
STEP 10.

17. STEP 11.
 #Smitty nim_config_env
STEP 1.

18. STEP 2.
STEP 3.

19. STEP 4.
STEP 5.

20. STEP 6.
STEP 7.

21. STEP 8.
STEP 9.

22. STEP 10.
 Adding a standalone NIM client to the NIM master.
 #smitty nim_mkmac
 Boot the system in SMS mode. (If LPAR set it to boot in SMS mode.)
 Test connectivity from client to NIM server using SMS ping
NOTE: Perform PING from SMS menu to make sure client is able to communicate to NIM Server
using the IP address.
 Go to Remote IPL option and select do PING test.

23. STEP 1.
STEP 2.

24. STEP 3.
STEP 4.

25. STEP 5.
STEP 6.

26. STEP 7.
STEP 8.

27. STEP 9.
Ping Error : Client Between NIM master server .