This presentation includes what is accident detection system ppt ,what are its requirements and how its works and its advantages,disadvantages and applications,Results and future sccope and at last conclusion
In highly populated countries, people lose their lives because of accidents and poor emergency facilities every day. These lives could have been saved if medical facilities are provided at the right time. This thesis implies a system which is a solution to this drawback, when a vehicle meets with an accident immediately, accelerometer module detects the signal, and it is sent to the Arduino microcontroller programmed by C programming language. Arduino sends an alert message through the GSM module including the location to the police station or a rescue team. So the police can immediately trace the location through the GPS modem after receiving the information. LCD is used to display location message from GPS module. The system is simulated and practically designed by the use of required hardware components and the results are satisfied with the expectation. Yu Yu Mon Win | Moe Myint Aung | Thin Thin "Accident Detection System using Arduino Uno" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27840.pdfPaper URL: https://www.ijtsrd.com/computer-science/other/27840/accident-detection-system-using-arduino-uno/yu-yu-mon-win
The main objective of our project is to provide an optimum solution to the traffic hazards and the road accidents. According to this project when a vehicle meets with an accident, immediately vibration sensor will detect the signal and sends it to ARM controller. Microcontroller sends the alert message through the GSM MODEM including the location to police control room or a rescue team. So the police can immediately trace the location through the GPS MODEM after receiving the information.
In highly populated countries, people lose their lives because of accidents and poor emergency facilities every day. These lives could have been saved if medical facilities are provided at the right time. This thesis implies a system which is a solution to this drawback, when a vehicle meets with an accident immediately, accelerometer module detects the signal, and it is sent to the Arduino microcontroller programmed by C programming language. Arduino sends an alert message through the GSM module including the location to the police station or a rescue team. So the police can immediately trace the location through the GPS modem after receiving the information. LCD is used to display location message from GPS module. The system is simulated and practically designed by the use of required hardware components and the results are satisfied with the expectation. Yu Yu Mon Win | Moe Myint Aung | Thin Thin "Accident Detection System using Arduino Uno" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27840.pdfPaper URL: https://www.ijtsrd.com/computer-science/other/27840/accident-detection-system-using-arduino-uno/yu-yu-mon-win
The main objective of our project is to provide an optimum solution to the traffic hazards and the road accidents. According to this project when a vehicle meets with an accident, immediately vibration sensor will detect the signal and sends it to ARM controller. Microcontroller sends the alert message through the GSM MODEM including the location to police control room or a rescue team. So the police can immediately trace the location through the GPS MODEM after receiving the information.
ppt on accident detection system based on Iotrahul ranjan
The Internet if Things(IoT) is regarded as atechnology and economic wave in the global information industry after the Internet. The IoT is an intelligent network which connects all things to the Internet for the purpose of exchanging information and communicating through the information sensing devices in accordance with agreed protocols. It achieves the goal of intelligent identifying, locating, tracking, monitoring, and managingthings . It is an extension and expansion of Internet-based network, which expands the communication from human and human to human andthings or things and things. In the IoT paradigm, many objectssurrounding us will be connected into networks in one form oranother. TheIOT concept, hence, aims at making the Internet even more immersive and pervasive.
IOT will foster the development of a number of applications that make useof the potentially enormous amount and variety of data generated by suchObjects to provide new services to citizens, companies, and public administrations.
Here we are designing “INTELLIGENT HIGHWAY” by deploying wireless sensor network. Wireless sensor networks are adhoc networks which consistof large number of tiny sensor nodes with limited resource and one or more base stations, sensor nodes consist of processing unit with limited computational power and limited capacity. We are integrating this wireless sensor networks into the internet as a part of IOT so that anyone can access the Situations about the highway anywhere in the world.
Project report on Vehicle accident and Alcohol sensing alert with Engine Lock...Hitesh Kumar Singh
The main purpose behind this project is “Drunk driving detection”. Now a days, many accidents are happening because of the alcohol consumption of the driver or the person who is driving the vehicle. Thus, Drunk driving is a major reason of accidents in almost all the countries in the world. Alcohol Detector in Car project is designed for the safety of the people seating inside the car. This project should be fitted / installed inside the vehicle. If any Accident occurs then engine goes off and Alarm goes on. If there is no alcohol / no accident, then the Engine remains on and Alarm remains off. Even, if the Alcohol is detected, the engine goes off Alarm starts beeping.
Gas Leakage Detection Based on IOT
Cloud Technologies providing Complete Solution for all
Academic Projects Final Year/Semester Student Projects
For More Details,
Contact:
Mobile:- +91 8121953811,
whatsapp:- +91 8522991105,
Email ID: cloudtechnologiesprojects@gmail.com
Vehicle anti theft tracking system based on internet of things Jyothsna Sridhar
As the number of urban vehicles are growing rapidly vehicle theft has become an important concern for all vehicle owners.
However present anti theft system lacks the tracking and monitoring system.
The vehicle anti theft tracking System based on Internet of things is proposed which can provide all round service to car owners.
This project represents a way of developing an
interface to detect driver drowsiness based on continuously
monitoring eyes and DIP algorithms. Micro sleeps that are short
period of sleeps lasting 2 to 3 seconds are good indicator of
fatigue state. Thus by continuously monitoring the eyes of the
driver by using camera one can detect the sleepy state of driver
and timely warning is issued.
Aim of the project is to develop the hardware which is very
advanced product related to driver safety on the roads using
controller and image processing. This product detects driver
drowsiness and gives warning in form of alarm and as well as
decreases the speed of vehicle.Along with the drowsiness
detection process there is continuous monitoring of the distance
done by the Ultrasonic sensor. The ultrasonic sensor detects the
obstacle and accordingly warns the driver as well as decreases
speed of vehicle.
ppt on accident detection system based on Iotrahul ranjan
The Internet if Things(IoT) is regarded as atechnology and economic wave in the global information industry after the Internet. The IoT is an intelligent network which connects all things to the Internet for the purpose of exchanging information and communicating through the information sensing devices in accordance with agreed protocols. It achieves the goal of intelligent identifying, locating, tracking, monitoring, and managingthings . It is an extension and expansion of Internet-based network, which expands the communication from human and human to human andthings or things and things. In the IoT paradigm, many objectssurrounding us will be connected into networks in one form oranother. TheIOT concept, hence, aims at making the Internet even more immersive and pervasive.
IOT will foster the development of a number of applications that make useof the potentially enormous amount and variety of data generated by suchObjects to provide new services to citizens, companies, and public administrations.
Here we are designing “INTELLIGENT HIGHWAY” by deploying wireless sensor network. Wireless sensor networks are adhoc networks which consistof large number of tiny sensor nodes with limited resource and one or more base stations, sensor nodes consist of processing unit with limited computational power and limited capacity. We are integrating this wireless sensor networks into the internet as a part of IOT so that anyone can access the Situations about the highway anywhere in the world.
Project report on Vehicle accident and Alcohol sensing alert with Engine Lock...Hitesh Kumar Singh
The main purpose behind this project is “Drunk driving detection”. Now a days, many accidents are happening because of the alcohol consumption of the driver or the person who is driving the vehicle. Thus, Drunk driving is a major reason of accidents in almost all the countries in the world. Alcohol Detector in Car project is designed for the safety of the people seating inside the car. This project should be fitted / installed inside the vehicle. If any Accident occurs then engine goes off and Alarm goes on. If there is no alcohol / no accident, then the Engine remains on and Alarm remains off. Even, if the Alcohol is detected, the engine goes off Alarm starts beeping.
Gas Leakage Detection Based on IOT
Cloud Technologies providing Complete Solution for all
Academic Projects Final Year/Semester Student Projects
For More Details,
Contact:
Mobile:- +91 8121953811,
whatsapp:- +91 8522991105,
Email ID: cloudtechnologiesprojects@gmail.com
Vehicle anti theft tracking system based on internet of things Jyothsna Sridhar
As the number of urban vehicles are growing rapidly vehicle theft has become an important concern for all vehicle owners.
However present anti theft system lacks the tracking and monitoring system.
The vehicle anti theft tracking System based on Internet of things is proposed which can provide all round service to car owners.
This project represents a way of developing an
interface to detect driver drowsiness based on continuously
monitoring eyes and DIP algorithms. Micro sleeps that are short
period of sleeps lasting 2 to 3 seconds are good indicator of
fatigue state. Thus by continuously monitoring the eyes of the
driver by using camera one can detect the sleepy state of driver
and timely warning is issued.
Aim of the project is to develop the hardware which is very
advanced product related to driver safety on the roads using
controller and image processing. This product detects driver
drowsiness and gives warning in form of alarm and as well as
decreases the speed of vehicle.Along with the drowsiness
detection process there is continuous monitoring of the distance
done by the Ultrasonic sensor. The ultrasonic sensor detects the
obstacle and accordingly warns the driver as well as decreases
speed of vehicle.
IoT Based Accident Avoidance and Detection System for Two WheelersIJASRD Journal
The World Health Organization (WHO) pointed out that about 1.25 million people die each year due to accident especially, two wheelers. Timely medical aid can help in saving lives. This system aims to avoid accident and alert the nearby medical center and relatives about an accident to provide immediate medical aid in case of an accident. The attached accelerometer in the vehicle senses the tilt of the vehicle and supporting wheels will avoid the bike from fall. The vibration sensor on the vehicle senses the level of vibration to understand the seriousness of the accident. Thus, the system will make a decision and sends the information to the smart phone through IoT modem. The Android application in the mobile phone will sent text message to the nearest medical center and friends. Application also shares the exact location of the accident that can save the time. This system is also used to monitor the speed of the vehicle and to avoid accident by using the speed sensor. If the speed is greater than the predefined value then the alarm will enable to indicate the driver to reduce the speed.
At Present, the number of vehicles plying on the roads has increased, leading to heavy traffic, particularly in the intersection of roads. This drastic increase in vehicles has caused risk to Emergency Vehicle drivers. They lose a lot of time, struck in traffic jams and confusion among people in giving way to the Emergency Vehicles. So we are developing a Mobile Application to detect the approach of an Emergency Vehicle and warn the people who are on the way or near the ambulance. The traditional siren and lights prove not to be helpful when there is lot of traffic and noise. We believe our system will be better and effective. We plan to use GPS (Global Positioning System) to detect the position of the Emergency Vehicle and alert people within a circle of the GPS location.
“Helpdroid” we inspire by movie-Prema the
project we provide the accident detection in any place. We
provide the help to injuries peoples. When the car or bike
crash together then the GPS and GMS with the crash sensor
send the digital signal and send the message and call to near
police station, ambulance and there related persons.
Wireless Reporting System for Accident Detection at Higher SpeedsIJERA Editor
Speed is one of the basic reasons for vehicle accident. Many lives could have been saved if emergency service
could get accident information and reach in time. Nowadays, GPS has become an integral part of a vehicle
system. This paper proposes to utilize the capability of a GPS receiver to monitor speed of a vehicle and detect
accident basing on monitored speed and send accident location to an Alert Service Center. The GPS will
monitor speed of a vehicle and compare with the previous speed in every second through a Microcontroller
Unit. Whenever the speed will be below the specified speed, it will assume that an accident has occurred. The
system will then send the accident location acquired from the GPS along with the time and the speed by utilizing
the GSM network. This will help to reach the rescue service in time and save the valuable human life.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
1. SHREE INSTITUTE OF TECHNICAL EDUCATION
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING
(An ISO 9001:2008 Certified institution)
(Approved by AICTE, Affiliated toJ.N.T.University, Anantapur)
Krishnapuram (M), Tirupati-Srikalahasti Highway Road, Renigunta.
Chittoor (Dist), A.P.
(2016-2020).
2. ACCIDENT DETECTION USING SMART PHONES
PRESENTED BY: UNDER THE GUIDENCE
V.SAI JOSHNA MR.T.PRASAD
(164A1A0406) (HODOF ECE)
3. Contents:-
Introduction of project
Purpose of project
Survey on accident
Analysis
Design
Function
Application
Advantages
Disadvantages
conclusion
4. INTRODUCTION
The main purpose behind the implementation of the Accident
prevention is to minimize the road accidents which causes the
loss of valuable human life and other valuable goods.
Accident Prevention And Detection System(APDS) save lives
by reducing the time required for emergency responders to
arrive.
We are developing one Android application which will help to
reduces percentage of accident .
It is based on GPS(Global Positioning System).
5. PURPOSE OF SYSTEM
To prevent the accident
Detect the current location if accident occurs.
GPS provide us one function known as “DIGTALSPEDDOMETER”.
This Application contains two modules:-
Prevention
Detection.
It is a Alert system which is used to give alert to the family andmedical
services after aAccident.
6. Survey on Accident
Accidents are a leading cause of death:-
Over 1,37,000 people were killed in road accidents in 2013 alone,
that is more than the number of people killed in all our wars put
together
16 children die on Indian roads daily.
5 lives end on Delhi’s roads everyday.
There is one death every four minutes due to a road accident in
India.
7. Requirements for Using
•Application
• It works on Kit-Kat (4.0) and above androidversion.
• Display size of mobile is above 4 inches.
• User must have to install ADS in their Android SmartPhone.
• User must have to enables their GPS.
• User must have to enables their internet connection.
8. What is a Digital Speedometer
Application?
• It is one android application which is easily available in the market.
• It displays the current speed of vehicle by using GPS.
• It gives values in the form of Seven SegmentDisplay.
• It is so accurate and it nearby gives 99.99% accurate result.
9. How it works?
It is a GPS based application.
GPS will be allocating one value to every location.
As we travel from one location to another the GPS knows where weare
travelling by the allocated value.
That means value of location will be changed as we travel from one
location to the other.
Digital speedometer calculates the change in location with respective to
time.
10. Concept & Working
• User first of all will have to install the APDS Application
on their Android SmartPhone.
• Then one Registration window will be popup where user have to
enter their Name, Phone Number, Email id, Blood Group.
13. Alert
If Current speed of vehicle is equal to or more than Maximum Speed
enter by the user then alarm will be blown using the application.
Alarm contains continues vibration with voice message “Slow down
the Speed”.
14. Ignore Alert
If user ignore this alert, then message will be send
to users registered contacts.
15. Detection & Messaging
This was all about prevention. In Detection part sudden fall in speedwill
be observed and also it will be calculated.
After detection of sudden fall the application sends message to registered
numbers of the user and search near by hospitals and informthem.
16. Application
Ambulance Management.
Accident Information system .
Insurance Companies.
Police Department.
Blood Banks.
Regional Transport Office(RTO).
Toll way Accident Management.
Road Traveling services.
17. Advantages
Automatic alert on crossing speed limit.
Immediate help can be provided.
Nearest hospitals can be located.
Accident rate can be reduced
Parents monitor their child driving.
19. CONCLUSION
In the present world the percentage of accident has increased so widely
because people were not helping when accident occurs even if theperson
is fallen in front of their eyes. After development of ACCIDENT
DETECTION system in future if accident of person is happened he
would not have to depend on other people for help one more advantage
will be that , by using this application the location of nearby hospitals be
acknowledged to the user and message will be send to nearby hospital.