3. production experiments magazine
•Download as PPTX, PDF•
0 likes•9 views
This document outlines Olivia Waller's process for creating a magazine cover for a sport fishing magazine. Some of the key steps included adding a fish photo as the background, adding the title "Sport Fishing" in a colored font, and adding additional text and colors to headline sections to make them stand out. Later steps involved using shapes and bold fonts to draw attention to plugs and additional details like a barcode. In the reflection, Olivia notes elements she aims to carry over to the final product, like using color pops, a bold title, and shapes to draw attention and make the magazine cover look realistic and interesting to audiences.
Report
Share
Report
Share
Recommended
6. production reflection(3)
Olivia Waller reflects on the process of creating the front cover of a magazine. She used various digital design tools to add elements like images, text in different fonts, sizes and colors, and a barcode to make the cover look professional and grab readers' attention. She also describes her process for designing double page spreads inside the magazine, including adding a title, images, and text blocks in complementary designs and colors. Overall, she feels her simple but carefully designed magazine cover and spreads will be effective and appeal to the intended audience.
3. production experiments(fishing)
The document describes the process of creating a magazine cover. The creator first found an image online of someone holding a large fish to use on the cover. Additional elements were then added, including mentioning a prize draw and stories inside the magazine. A title and issue number were also included to make the cover look more realistic. Small descriptions of stories and an advertisement for an exclusive story were later added. Finally, a title was put on the photo to make the cover look more professional.
Front Cover
The document describes the process of designing a magazine cover. The designer inserted brushes with a noisy effect for frames to give the magazine a rough look. A masthead and barcode were added to clean up the front cover while keeping the rough effect. A main image was given a purple glow to portray the subject as untouchable. The completed magazine included cover lines and an inverted pull quote over the main image, achieving the intended house style for the target audience.
Overall construction of my magazine
The document describes the process of designing the front cover of a magazine called "Note Magazine". Key steps included:
1) Creating a black background with a bubble effect and adding a red glow in the center.
2) Adding a masthead with the capital N logo and magazine name in different font sizes to make it stand out.
3) Placing the main image of a band in the center and adding yellow and white glows around it to make it the focal point.
4) Adding text including the band name "Twofold" with lighting effects to make it eye-catching.
Mediaaa
This document describes the progress of designing a magazine cover. The designer started with a photo of the feature model and added the main title. Then a smaller image and text were included to imply more interior content. Finally, a barcode was added to give the cover a professional look.
New conetnts page presentation
This document discusses the production of a contents page for a magazine. It describes the choices made for various design elements including a masthead, background picture, logo, boxes, banners, fonts, and small additional image. The creator believes the design looks professional and matches the R&B genre through the use of colors, images, and information included that would appeal to readers and be found in typical music magazines. The overall outcome is assessed as successful in looking conventional, realistic, and suited to the target genre and audience.
Codes and conventions of a contents page
The document discusses key features commonly found on magazine contents pages, including a central image of the front cover artist to engage readers. It notes contents pages always include the date and masthead with the magazine's name in a distinctive font. Smaller inside images typically include page numbers to direct readers to related stories. Standard elements are also the magazine's website address, a range of font sizes for readability, quotes from cover interviews, and an editor's letter.
Construction of front cover magazine page
The document describes the process of designing a magazine cover page. Key steps included selecting a main photo and resizing/cropping it to fit, manipulating the photo's colors to make it eye-catching, adding text describing the magazine's contents in different sizes and colors, and including additional design elements like the magazine title, issue details, and advertisements to follow magazine design conventions. The end result was intended to represent the genre of music the magazine covers and attract readers.
Recommended
6. production reflection(3)
Olivia Waller reflects on the process of creating the front cover of a magazine. She used various digital design tools to add elements like images, text in different fonts, sizes and colors, and a barcode to make the cover look professional and grab readers' attention. She also describes her process for designing double page spreads inside the magazine, including adding a title, images, and text blocks in complementary designs and colors. Overall, she feels her simple but carefully designed magazine cover and spreads will be effective and appeal to the intended audience.
3. production experiments(fishing)
The document describes the process of creating a magazine cover. The creator first found an image online of someone holding a large fish to use on the cover. Additional elements were then added, including mentioning a prize draw and stories inside the magazine. A title and issue number were also included to make the cover look more realistic. Small descriptions of stories and an advertisement for an exclusive story were later added. Finally, a title was put on the photo to make the cover look more professional.
Front Cover
The document describes the process of designing a magazine cover. The designer inserted brushes with a noisy effect for frames to give the magazine a rough look. A masthead and barcode were added to clean up the front cover while keeping the rough effect. A main image was given a purple glow to portray the subject as untouchable. The completed magazine included cover lines and an inverted pull quote over the main image, achieving the intended house style for the target audience.
Overall construction of my magazine
The document describes the process of designing the front cover of a magazine called "Note Magazine". Key steps included:
1) Creating a black background with a bubble effect and adding a red glow in the center.
2) Adding a masthead with the capital N logo and magazine name in different font sizes to make it stand out.
3) Placing the main image of a band in the center and adding yellow and white glows around it to make it the focal point.
4) Adding text including the band name "Twofold" with lighting effects to make it eye-catching.
Mediaaa
This document describes the progress of designing a magazine cover. The designer started with a photo of the feature model and added the main title. Then a smaller image and text were included to imply more interior content. Finally, a barcode was added to give the cover a professional look.
New conetnts page presentation
This document discusses the production of a contents page for a magazine. It describes the choices made for various design elements including a masthead, background picture, logo, boxes, banners, fonts, and small additional image. The creator believes the design looks professional and matches the R&B genre through the use of colors, images, and information included that would appeal to readers and be found in typical music magazines. The overall outcome is assessed as successful in looking conventional, realistic, and suited to the target genre and audience.
Codes and conventions of a contents page
The document discusses key features commonly found on magazine contents pages, including a central image of the front cover artist to engage readers. It notes contents pages always include the date and masthead with the magazine's name in a distinctive font. Smaller inside images typically include page numbers to direct readers to related stories. Standard elements are also the magazine's website address, a range of font sizes for readability, quotes from cover interviews, and an editor's letter.
Construction of front cover magazine page
The document describes the process of designing a magazine cover page. Key steps included selecting a main photo and resizing/cropping it to fit, manipulating the photo's colors to make it eye-catching, adding text describing the magazine's contents in different sizes and colors, and including additional design elements like the magazine title, issue details, and advertisements to follow magazine design conventions. The end result was intended to represent the genre of music the magazine covers and attract readers.
The soup presentation
The document discusses the development of a student magazine covering topics like researching other magazines for inspiration, designing the front cover and contents page, and choosing fonts. The front cover was designed to have a laid back, fashionable feel for busy students. Photos from a cover shoot were used on the contents page to connect it visually to the front cover. Different fonts and colors were tested before settling on a design that looked professional and conveyed the magazine's focus on autumn/winter fashion for students.
Magazine Front Cover Production Steps
The document discusses the steps taken to design a magazine cover, including selecting the best photo from a shoot, adding an adjustment layer to enhance the photo, incorporating the specified masthead font and red color scheme, adding a barcode as is conventional, and designing headlines using specified fonts with effects like black outlines and embossed shapes.
Contents page
The document describes the process of creating a magazine contents page layout. First, a black texture was applied to the template as a background. Then background images and textures were added to establish a basic layout structure. Main images were positioned first to work text around. Numbers, title, and masthead were added next to generate the initial layout. Additional text layers were incorporated along with lighting effects and contents to develop the theme further. Shape layers, textures, and font formatting were applied last to finish the layout while maintaining a consistent theme for the target audience.
Magazine contents
The document compares the contents pages of three music magazines. It finds that the first magazine's contents page is unclear and dull due to its grey color. In contrast, the NME magazine has a clearer layout that shows what each page contains. The Q magazine page uses bold colors and images to catch readers' attention, but does not clearly list all pages and contents.
Magazine Contents layout decisions
The document describes the process and decisions made in laying out the contents page of a magazine. Key steps included adding the title at the top using the same font and style as the front cover, placing pictures from the flat plan and adding a stroke around them, numbering the pictures and adding circle graphics to contain the page numbers, and progressively refining the layout by adjusting sizes, colors, and adding additional elements like headlines, stories, and graphics with text.
Photoshop process
The document describes the process of creating a magazine cover in Photoshop. Key steps include: adjusting an image size for easier editing, selecting the subject and refining the selection to isolate her from the background, placing the background behind her and editing colors, adding additional design elements like text and shadows, and applying a lens flare filter to blend the layers together. The final cover was produced meeting the planned genre and production goals.
Magazine cover layout decisions
The document describes the process and decisions made in laying out a magazine cover. Key points:
- The creator first added a background cover image centered to focus on the main subject. Space was left at the top for the masthead.
- A masthead was added and stretched across the top. Effects like bevel and emboss were used to make it stand out.
- Graphics, headlines, and text were positioned throughout using different colors, sizes, and effects to draw attention and intrigue readers.
- The layout was refined iteratively based on the brief and to improve clarity, balance, and sophistication. Positioning and design elements were adjusted.
Drafts of my table of contents
This was the author's first draft of a table of contents for a magazine. They were inspired by an NME style and felt they captured that look. Images were included to make it feel personal for consumers and like they were having a conversation with the artist. A subscribe box and page numbers were added to look more professional. The second draft aligned everything and added a signature to the editor's note to make it look more polished.
Drafts of my table of contents
This was the author's first draft of a table of contents for a magazine. They were inspired by an NME style and included a bold masthead, catchy middle text, direct images to make it feel personal for consumers, and a subscribe box. Page numbers were added to images to look professional, as was an editor's note. The author then aligned everything and added a signature to the editor's note to make it look more professional.
Powerpoint on my school magazine (1)
The document discusses ways to improve various design elements of a school magazine. It suggests that the cutting out of the feature photograph could be improved using selection tools to remove white bits. It also recommends adding more images and implementing a strict color scheme to improve the magazine's style. For the masthead, it proposes using a bolder, more colorful font to make it stand out more. The document provides additional tips for enhancing other areas like the plug text, contents page, and use of images throughout.
Stages of photoshop
The document discusses an individual altering fonts, layouts, and designs in Photoshop to make their magazine stand out and appeal to their target market. They experiment with changing fonts, backgrounds, adding layers for pages like the content page, and designing double page spreads with bold images and quotes. Their final pieces include a content page with a simplified modern design and a double page spread using direct imagery and text for visual impact.
Contents page
The document describes the iterative process of designing a contents page for a magazine. Over four versions, the designer improves the layout, adds additional formatting elements like lines, shapes and images, changes fonts and sizes, and restructures elements to look more professional and visually appealing according to the music genre theme. The final version incorporates more shapes and lines using the color scheme, enlarges page numbers, adds an editor's speech, and includes additional side images with borders to draw the eye.
3. production experiments visual
The document describes the process an individual took to create a magazine cover in Photoshop. It details each step, including adding a red banner, changing text colors, adjusting opacity of text, adding shapes, finding images online, and outlining pictures. In the reflection, the individual indicates the overall layout and use of a large background image will be included in the final magazine cover design.
7. evaluation(3)
The student created a magazine as part of a school project. In their research, they looked at existing magazines for layout inspiration and color schemes. They spent several hours researching the band they wrote about. Their planning included style sheets but they did not plan their contents page well. They finished early and had to hastily create an extra page. Peer feedback suggested adding more colors but keeping the double page spread background white. The student agreed more colors were needed but disagreed that a background was required.
Looking back at your preliminary task, what
I have learned several things in progressing from my preliminary magazine to the final product. I improved my page layout skills by organizing content better and using more appealing colors. My content became more interesting by doing additional research on my target audience. I also improved my software skills, allowing me to use more techniques like drop shadows to make the final product look more professional. Overall, my knowledge of design conventions, research abilities, and software expertise grew substantially from the preliminary to final versions.
Progress on contents
1) The document describes the process of designing the contents page for a magazine, including adding images, text, colors, and layout elements.
2) Feedback was received on making the text smaller and adding captions to images. Changes were made based on this feedback.
3) An album cover was designed by combining faces from different images. Additional editing was done to improve the quality and layout of the album cover image.
4) The final contents page was updated by replacing the original album cover image, adding more pages and page numbers, and including additional articles and explanations.
3. production experiments
Jack Bevens created a magazine cover in Photoshop by setting up an A4 size international paper page, adding a background image from the internet, and placing bold text using different tools. Colors and effects like strokes were added to the text to make it more readable and colorful. A barcode, date, and price were also included to mimic real magazines. In the reflection, Jack notes they will include sub-headings and images in the final version and need to make it more professional like a real magazine by adding more words and images.
3. production experiments
Sophie Freeman conducted production experiments for a magazine cover. She added images, captions, and names to give it a professional magazine look. More photos were included at the bottom to make the cover more detailed and interesting for potential buyers. A barcode was added last to allow scanning the product to purchase it. In her reflection, Sophie notes elements she will use in her final product, like the layout and names, and aspects to improve like adding a price.
7. evaluation (js)
Jack Sullivan created a magazine cover and spreadsheet to promote a music artist. In his document, he discusses the research, planning, time management, target audience, and technical and aesthetic qualities of his work. He received peer feedback which noted that the main font on the magazine cover stands out well but could be improved with more images and subheadings. The spreadsheet effectively promotes the artist's music but page 3 could include more text for additional details. Jack agrees with this feedback and would make changes such as adding more content to the magazine cover and spreadsheet page 3 for more depth and professional appearance.
7. FMP Evaluation
The document provides details on Leticia Pozze's FMP evaluation, including research, planning, time management, technical qualities, aesthetic qualities, audience appeal, and peer feedback received. Some key points:
- Research included analyzing survey answers to determine appealing content for the target teenage audience.
- Planning involved initial plans presentations, mood boards, and style sheets to decide layouts, color schemes, and fonts.
- Time management was successful, with all work completed on time, though more photos and improvements could have been made with more time.
- Technical qualities drew from existing magazine examples for layout ideas. Peer feedback suggested improvements to text legibility and consistency.
- Aesthetics used eye
Producing cover as
1) The document describes the process of creating a magazine front cover for a coursework assignment.
2) Key steps included creating a blank A4 page, adding a masthead with the magazine name and details in blue, importing a photo of a model and flipping it to face the inside of the magazine.
3) Additional elements were added like pulls highlighting content, a blue circle plug and red exclusive box, the main article title and teaser in black, and a bar code to complete the realistic magazine cover design.
Producing cover as
1) The document describes the process of creating a magazine front cover for a coursework assignment.
2) Key steps included creating a blank A4 page, adding a masthead with the magazine name and details in blue, importing a photo of a model and flipping it to face the inside of the magazine.
3) Additional elements were added like pulls highlighting content, a blue circle plug and red exclusive box, the main article title and teaser in black, and a bar code to complete the realistic magazine cover design.
More Related Content
What's hot
The soup presentation
The document discusses the development of a student magazine covering topics like researching other magazines for inspiration, designing the front cover and contents page, and choosing fonts. The front cover was designed to have a laid back, fashionable feel for busy students. Photos from a cover shoot were used on the contents page to connect it visually to the front cover. Different fonts and colors were tested before settling on a design that looked professional and conveyed the magazine's focus on autumn/winter fashion for students.
Magazine Front Cover Production Steps
The document discusses the steps taken to design a magazine cover, including selecting the best photo from a shoot, adding an adjustment layer to enhance the photo, incorporating the specified masthead font and red color scheme, adding a barcode as is conventional, and designing headlines using specified fonts with effects like black outlines and embossed shapes.
Contents page
The document describes the process of creating a magazine contents page layout. First, a black texture was applied to the template as a background. Then background images and textures were added to establish a basic layout structure. Main images were positioned first to work text around. Numbers, title, and masthead were added next to generate the initial layout. Additional text layers were incorporated along with lighting effects and contents to develop the theme further. Shape layers, textures, and font formatting were applied last to finish the layout while maintaining a consistent theme for the target audience.
Magazine contents
The document compares the contents pages of three music magazines. It finds that the first magazine's contents page is unclear and dull due to its grey color. In contrast, the NME magazine has a clearer layout that shows what each page contains. The Q magazine page uses bold colors and images to catch readers' attention, but does not clearly list all pages and contents.
Magazine Contents layout decisions
The document describes the process and decisions made in laying out the contents page of a magazine. Key steps included adding the title at the top using the same font and style as the front cover, placing pictures from the flat plan and adding a stroke around them, numbering the pictures and adding circle graphics to contain the page numbers, and progressively refining the layout by adjusting sizes, colors, and adding additional elements like headlines, stories, and graphics with text.
Photoshop process
The document describes the process of creating a magazine cover in Photoshop. Key steps include: adjusting an image size for easier editing, selecting the subject and refining the selection to isolate her from the background, placing the background behind her and editing colors, adding additional design elements like text and shadows, and applying a lens flare filter to blend the layers together. The final cover was produced meeting the planned genre and production goals.
Magazine cover layout decisions
The document describes the process and decisions made in laying out a magazine cover. Key points:
- The creator first added a background cover image centered to focus on the main subject. Space was left at the top for the masthead.
- A masthead was added and stretched across the top. Effects like bevel and emboss were used to make it stand out.
- Graphics, headlines, and text were positioned throughout using different colors, sizes, and effects to draw attention and intrigue readers.
- The layout was refined iteratively based on the brief and to improve clarity, balance, and sophistication. Positioning and design elements were adjusted.
Drafts of my table of contents
This was the author's first draft of a table of contents for a magazine. They were inspired by an NME style and felt they captured that look. Images were included to make it feel personal for consumers and like they were having a conversation with the artist. A subscribe box and page numbers were added to look more professional. The second draft aligned everything and added a signature to the editor's note to make it look more polished.
Drafts of my table of contents
This was the author's first draft of a table of contents for a magazine. They were inspired by an NME style and included a bold masthead, catchy middle text, direct images to make it feel personal for consumers, and a subscribe box. Page numbers were added to images to look professional, as was an editor's note. The author then aligned everything and added a signature to the editor's note to make it look more professional.
Powerpoint on my school magazine (1)
The document discusses ways to improve various design elements of a school magazine. It suggests that the cutting out of the feature photograph could be improved using selection tools to remove white bits. It also recommends adding more images and implementing a strict color scheme to improve the magazine's style. For the masthead, it proposes using a bolder, more colorful font to make it stand out more. The document provides additional tips for enhancing other areas like the plug text, contents page, and use of images throughout.
Stages of photoshop
The document discusses an individual altering fonts, layouts, and designs in Photoshop to make their magazine stand out and appeal to their target market. They experiment with changing fonts, backgrounds, adding layers for pages like the content page, and designing double page spreads with bold images and quotes. Their final pieces include a content page with a simplified modern design and a double page spread using direct imagery and text for visual impact.
What's hot (11)
Similar to 3. production experiments magazine
Contents page
The document describes the iterative process of designing a contents page for a magazine. Over four versions, the designer improves the layout, adds additional formatting elements like lines, shapes and images, changes fonts and sizes, and restructures elements to look more professional and visually appealing according to the music genre theme. The final version incorporates more shapes and lines using the color scheme, enlarges page numbers, adds an editor's speech, and includes additional side images with borders to draw the eye.
3. production experiments visual
The document describes the process an individual took to create a magazine cover in Photoshop. It details each step, including adding a red banner, changing text colors, adjusting opacity of text, adding shapes, finding images online, and outlining pictures. In the reflection, the individual indicates the overall layout and use of a large background image will be included in the final magazine cover design.
7. evaluation(3)
The student created a magazine as part of a school project. In their research, they looked at existing magazines for layout inspiration and color schemes. They spent several hours researching the band they wrote about. Their planning included style sheets but they did not plan their contents page well. They finished early and had to hastily create an extra page. Peer feedback suggested adding more colors but keeping the double page spread background white. The student agreed more colors were needed but disagreed that a background was required.
Looking back at your preliminary task, what
I have learned several things in progressing from my preliminary magazine to the final product. I improved my page layout skills by organizing content better and using more appealing colors. My content became more interesting by doing additional research on my target audience. I also improved my software skills, allowing me to use more techniques like drop shadows to make the final product look more professional. Overall, my knowledge of design conventions, research abilities, and software expertise grew substantially from the preliminary to final versions.
Progress on contents
1) The document describes the process of designing the contents page for a magazine, including adding images, text, colors, and layout elements.
2) Feedback was received on making the text smaller and adding captions to images. Changes were made based on this feedback.
3) An album cover was designed by combining faces from different images. Additional editing was done to improve the quality and layout of the album cover image.
4) The final contents page was updated by replacing the original album cover image, adding more pages and page numbers, and including additional articles and explanations.
3. production experiments
Jack Bevens created a magazine cover in Photoshop by setting up an A4 size international paper page, adding a background image from the internet, and placing bold text using different tools. Colors and effects like strokes were added to the text to make it more readable and colorful. A barcode, date, and price were also included to mimic real magazines. In the reflection, Jack notes they will include sub-headings and images in the final version and need to make it more professional like a real magazine by adding more words and images.
3. production experiments
Sophie Freeman conducted production experiments for a magazine cover. She added images, captions, and names to give it a professional magazine look. More photos were included at the bottom to make the cover more detailed and interesting for potential buyers. A barcode was added last to allow scanning the product to purchase it. In her reflection, Sophie notes elements she will use in her final product, like the layout and names, and aspects to improve like adding a price.
7. evaluation (js)
Jack Sullivan created a magazine cover and spreadsheet to promote a music artist. In his document, he discusses the research, planning, time management, target audience, and technical and aesthetic qualities of his work. He received peer feedback which noted that the main font on the magazine cover stands out well but could be improved with more images and subheadings. The spreadsheet effectively promotes the artist's music but page 3 could include more text for additional details. Jack agrees with this feedback and would make changes such as adding more content to the magazine cover and spreadsheet page 3 for more depth and professional appearance.
7. FMP Evaluation
The document provides details on Leticia Pozze's FMP evaluation, including research, planning, time management, technical qualities, aesthetic qualities, audience appeal, and peer feedback received. Some key points:
- Research included analyzing survey answers to determine appealing content for the target teenage audience.
- Planning involved initial plans presentations, mood boards, and style sheets to decide layouts, color schemes, and fonts.
- Time management was successful, with all work completed on time, though more photos and improvements could have been made with more time.
- Technical qualities drew from existing magazine examples for layout ideas. Peer feedback suggested improvements to text legibility and consistency.
- Aesthetics used eye
Producing cover as
1) The document describes the process of creating a magazine front cover for a coursework assignment.
2) Key steps included creating a blank A4 page, adding a masthead with the magazine name and details in blue, importing a photo of a model and flipping it to face the inside of the magazine.
3) Additional elements were added like pulls highlighting content, a blue circle plug and red exclusive box, the main article title and teaser in black, and a bar code to complete the realistic magazine cover design.
Producing cover as
1) The document describes the process of creating a magazine front cover for a coursework assignment.
2) Key steps included creating a blank A4 page, adding a masthead with the magazine name and details in blue, importing a photo of a model and flipping it to face the inside of the magazine.
3) Additional elements were added like pulls highlighting content, a blue circle plug and red exclusive box, the main article title and teaser in black, and a bar code to complete the realistic magazine cover design.
7. evaluation(3)
Olivia Waller evaluated her FMP production process. For research, she found it useful to explore design ideas but notes a weakness was finding an original magazine name. Her planning helped create different ideas, but weaknesses included plans not working out as intended. For time management, she completed work on time but wishes she researched more magazines. Peer feedback praised her cover colors but noted the layout seemed crowded and could include more advertisements to attract audiences.
Evaluation q1 mag
This document evaluates how the author's media product uses, develops, and challenges conventions of real magazines. It summarizes:
The author's magazine cover uses conventions like a barcode, masthead, and tagline. Colors and layout are slightly different, with the tagline below the masthead. Coverlines are more spread out and the image is an establishing shot.
The author challenges conventions by adding a bottom coverline, listing the film's cast with an exclusive interview note, and making the large price more visible. The cover design is simpler and less busy than typical magazines.
Mock ups
This document contains Tayla Matthews' mockups and evaluations of magazine covers, contents pages, and spreads for a music magazine targeting a hip hop audience. The mockups are evaluated based on pros and cons. Key pros included prominent images and mastheads, and article previews. Key cons were a lack of additional images, too much blank space, and missing typical magazine details like barcodes and dates. The evaluations concluded the styles were appropriate for the genre but needed more visual interest and typical magazine conventions to seem professional. Lessons from the mockups informed the design of Tayla's final music magazine.
6. production reflection (ah)
The document is a production reflection by Alisha Harrison describing the process of creating magazine covers and spreads using Photoshop. Over multiple steps, Alisha describes opening Photoshop, finding images online, removing backgrounds, adding text and formatting, arranging images and adjusting sizes. Feedback was received from peers and changes were made. A second magazine cover and contents page were also created, with additional formatting details included for each step in the design process.
7. Evaluation(3).pptx
The document summarizes the production process of a magazine about Newcastle United football club. In the research phase, the author found it difficult to obtain club magazines. For planning, the author changed the front page layout to make it more professional and appealing to fans. Time management was an issue, with research and planning taking longer than production. Technically, the author used selection tools to remove backgrounds from photos and added a yellow rectangle so text was readable. Feedback praised the colors but suggested adding more articles to satisfy readers. The author agrees improvements could be made but disagrees that more colors were needed given the team's colors of black and white.
7. evaluation
The document provides an evaluation of an FMP (Final Major Project) magazine production process. It summarizes the planning, research, time management, technical qualities, aesthetic qualities, audience appeal, and peer feedback stages. For planning, the student found drafting ideas helpful. Research informed the magazine style. Poor time management meant less cover detail. Peer feedback noted fonts and centering could be improved, and colors between images and text didn't match well.
7. evaluation
The document contains an evaluation of an FMP project. It discusses the strengths and weaknesses of the student's research, planning, time management, technical qualities, aesthetic qualities, audience appeal, and feedback from peers. For research, the variety of sources was a strength but more could have been written. Planning helped with the product but felt like a waste of time. Time management was good but the inside of the magazine needed more time. Peer feedback praised the bright colors and layout but suggested more cover stories, subheadings, and less white space in the article. The student agrees more context and an in-depth story were needed on the cover.
6. production reflection alisha
The document is a production reflection by Alisha Harrison detailing the process of creating a photography magazine in Photoshop. It describes opening Photoshop and setting up pages for the front cover, double page spread, and back cover. The process involves adding images, editing photos, arranging text and graphics, and rearranging layers. Guidelines are used to help keep elements aligned. Photos are edited using tools like levels, brightness, and clone stamp. The contents page is also created with page numbers, banners, and images. Improvements are made through revisions and adding elements like boxes and strokes for readability.
Evaluation
The document discusses conventions for designing a music magazine cover and contents pages. It provides details on design choices such as centering the cover image, using bold fonts for the masthead, including the band's name and album title, and placing cover lines and headlines in visible locations. For the contents page, it discusses including artist photos, using columns, and featuring article titles and page numbers prominently. Overall, the document focuses on layout, formatting, and design elements to effectively showcase a band and entice readers.
Similar to 3. production experiments magazine (20)
More from OliviaWaller2
Reflection
Olivia created fonts and color schemes for her production project over several weeks. In week 1, she researched fonts on DaFont and selected "Big Noodle Titling" and "Loves" for titles and descriptions. In week 2, she chose a bright color scheme to match her fine art theme and created a style sheet with inspiration. Creating fonts and colors in advance helped plan her production. Over weeks 3-7, Olivia continued working on her project, making improvements and finalizing her products in week 7.
Evaluation
This document summarizes Olivia Waller's evaluation of various PowerPoints and production work completed for her FMP project. It discusses evaluations of her Pre-Proposal, Proposal, Contextual Research, Research, and Production Experiments presentations. Some key points made include that researching additional books and tutorials could have provided more useful inspiration, and including more production experiments would have given more plans and inspiration to draw from. Overall the evaluations are meant to identify strengths and areas for improvement to reference throughout the remainder of the project.
Planning
Olivia Waller has created a production planning PowerPoint to help guide the development of her final major project (FMP). Over the course of 3 weeks, she considered various elements like fonts, color schemes, layouts, and content. Font and color scheme planning included experimenting with options from DaFont to find styles that fit her creepy/unique theme. Style sheet research provided inspiration for edited photo styles. Her FMP will include a Photoshop website, merchandise (tote bag, t-shirt, hoodies), and a magazine cover featuring her photos. Mockups created in PowerPoint helped evaluate potential layouts. Overall, the thorough planning PowerPoint will assist Olivia in efficiently and cohesively producing her
Problem Solving
Olivia Waller identifies several potential technical problems that could arise during her production experiments project and discusses solutions to address each problem. Some of the key technical problems addressed include battery life and power for equipment like phones and laptops, storage issues, software crashes or performance issues, and problems encountered during Photoshop tutorials like unavailable brush tools. Olivia takes steps like regularly saving work, backing up files, bringing portable chargers, and researching tutorials in advance to find workarounds for any missing assets. She documents photos taken on her phone and in the studio and experiments with Photoshop effects. Overall, identifying and planning for technical problems aims to help Olivia's production go smoothly.
Research 1
The survey responses provided useful information for the FMP project. The majority of respondents were female aged 18-24 who enjoy photography. Most preferred edited photos in color and thought portfolios best displayed photos. Respondents used phones and edited photos, photographing themselves, friends, and nature. While some didn't know fine art, over half did, supporting the project theme. Questionnaires confirmed attendees heard of galleries through online/famous exhibits and would attend a photography exhibit.
Contextual research
This document provides context for Olivia Waller's final major project (FMP) in fine art photography. Originally, she planned to do landscape photography but became interested in fine art after researching other portfolios. She has decided to create a fine art photography portfolio to showcase her edited photos. She feels confident in this choice because she has successfully completed similar projects like a fanzine in the past. The document also discusses several artists - Jeremy Blincoe, Oleg Dou, Vee Speers, Lucia Emanuela Curzi, and Silke Bachman - that inspire Olivia's style and techniques. It analyzes books on portrait photography and using Photoshop to manipulate images. Finally, it considers the theories
(5) grade reflection
This document contains a student's reflection on their previous work and action plan to improve for their future Final Major Project (FMP). The student performed well in experiments and production previously but wants to improve their proposal and production research by including more details and references. Their action plan includes conducting more in-depth audience and product research, improving problem solving and experimentation, and providing more details in pre-production planning, production reflection, and strengths/weaknesses evaluation.
Contextual research
The document discusses contextual research for an FMP in fine art photography. It summarizes the work of several photographers as examples, including Jeremy Blincoe who creates mysterious landscapes exploring the mind, Oleg Dou who manipulates faces between beautiful and repulsive, and Vee Speers who produces dramatic surreal portraits. It also outlines books on HDR photography, fine art portraits, and how Photoshop is used to manipulate photographs in various artistic styles. The research will help inform the selection of techniques for the FMP fine art photography portfolio.
Fmp pre proposal
The student wishes to create a fine art photography portfolio for their final major project. They have always enjoyed photography since their father inspired them to take photos using his professional camera when they were younger. Doing a project based on photography will allow them to enjoy creating something they have always been passionate about. They plan to research different photography styles on Instagram and will aim to have an interesting visual style throughout their portfolio that appeals to audiences and keeps them engaged. The mood of their photos will be interesting in order to keep viewers enjoying and wanting to see more, as too serious of a mood may make the photos harder to enjoy. They decided on including a variety of edited photo styles to promote their work to a wider audience and grab attention.
Factual Written Elements
This document provides recipes for three cocktails: a gin lemonade cocktail made with gin, lemonade, and a lemon and lime calippo blended together; a mint lime rum cocktail made with rum, lime, raspberries, mint, and sugar muddled together and topped with club soda; and a strawberry daiquiri made by blending rum, fresh and frozen strawberries, and lime juice into a smoothie.
Factual Evaluation Fanzine
Olivia evaluated her project and identified several key learnings. She realized the importance of time management and setting a schedule to stay organized and meet deadlines. Her research of an existing fanzine was a strength that informed her theme and design. Creating mood boards and style sheets during planning helped her decide on colors, fonts, and layout. However, she could have expanded her research beyond just cocktails to food and drink for more design inspiration. Overall, she was happy with the final designs but recognizes the need to improve her planning and research processes for future projects by adding more depth and detail.
Factual Experiments Fanzine
The document discusses several experiments Olivia Waller tried based on YouTube videos. The first experiment was very easy but not skillful enough for her project. A second experiment with droplets was new but easy to follow online instructions for. A third colorful experiment could work on the magazine cover. A final experiment was fun but too random for her production.
Theory Essay
The document discusses how social media can negatively impact the mental health of women aged 16-24. A study found that teens who used social media for 7 hours per day were more than twice as likely to be diagnosed with depression compared to those who used it for an hour a day. Frequent social media use can cause feelings of inadequacy from unrealistic depictions of others' lives and cyberbullying. Celebrities like Selena Gomez have also struggled with addiction to social media and its negative effects on mental health.
Theory research
The document discusses research on the effects of social media usage on the mental health of teenage girls aged 16-24. A UK study found that excessive social media use was linked to increased depression and anxiety in girls through factors like lack of sleep, cyberbullying exposure, and less physical activity. Frequent social media users were more than twice as likely to be diagnosed with depression or receive treatment. The risks were greater for teens spending more than 3 hours daily on social media. Negative impacts can include feelings of inadequacy, isolation, and depression from social comparison and prioritizing online interaction over real relationships.
Factual Production Refection Fanzine
Olivia created a cocktail magazine fanzine over 9 days, editing photos in Photoshop and designing layouts. She made fruit garnishes as main features, getting faster with practice. Olivia experimented with layouts, settling on a scrapbook style with polaroid templates. She found fonts to make titles stand out and tie the color scheme together cohesively. Overall, Olivia is pleased with how her fanzine turned out and thinks it will appeal to her target audience.
Factual Final Design Fanzine
This document appears to be a fanzine created by Olivia Waller. A fanzine is an informal publication created by fans of a particular cultural phenomenon for the pleasure of others who share their interest. The fanzine discusses topics related to Olivia Waller's interests and is intended to share those interests with other fans.
Factual proposal
1. Olivia Waller proposes a fanzine about cocktails targeted at 18-24 year old females and males from upper middle class backgrounds. Research will include cocktail recipes, photos, and an interview with a mixologist.
2. The rationale is that Olivia developed InDesign skills on a previous magazine and will apply them to make the fanzine look professional. Researching cocktails will provide content for the fanzine pages.
3. Olivia will take screenshots throughout to evaluate progress, reflect on changes, and analyze what worked and didn't work for future projects.
Factual Audience Research Fanzine
Olivia Waller conducted research on the target audience for her product. Her primary audience is 18-24 year olds, who often go to pubs and bars. Research showed that alcohol, especially beer, is popular across the UK. Her primary gender is female, and research found that vodka is most popular among women. Additional research covered average incomes, drinking habits, popular jobs and psychographic profiles to help appeal to and understand the target audience. Primary research in interviews provided additional insights. The research aimed to ensure the product will relate to and appeal to the target age, gender and demographic audience.
Factual Planning Fanzine
Olivia plans to create a fanzine about cocktails with a feminine theme. She will include recipes and photos of 3 cocktails, an interview with a mixologist, and a photo gallery. Olivia has selected pastel colors and feminine fonts for the design. Each cocktail page will feature the recipe, instructions, and a photo of the drink. She has created a production schedule and will take safety precautions when working on the computer such as regular breaks and backups in case of technical issues.
Factual Research pro forma
This document summarizes research from 4 fanzines about food and drink. It finds that the fanzines commonly include photos, recipes, reviews, tips and instructions for preparing ingredients and cocktails. They aim to represent interests and social groups. The fanzines were created digitally and include colorful photos and layouts to appeal to audiences interested in food, drink and cooking.
More from OliviaWaller2 (20)
Recently uploaded
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
AI for Legal Research with applications, tools
AI applications in legal research include rapid document analysis, case law review, and statute interpretation. AI-powered tools can sift through vast legal databases to find relevant precedents and citations, enhancing research accuracy and speed. They assist in legal writing by drafting and proofreading documents. Predictive analytics help foresee case outcomes based on historical data, aiding in strategic decision-making. AI also automates routine tasks like contract review and due diligence, freeing up lawyers to focus on complex legal issues. These applications make legal research more efficient, cost-effective, and accessible.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
Variable frequency drive .A Variable Frequency Drive (VFD) is an electronic device used to control the speed and torque of an electric motor by varying the frequency and voltage of its power supply. VFDs are widely used in industrial applications for motor control, providing significant energy savings and precise motor operation.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Gas agency management system project report.pdf
The project entitled "Gas Agency" is done to make the manual process easier by making it a computerized system for billing and maintaining stock. The Gas Agencies get the order request through phone calls or by personal from their customers and deliver the gas cylinders to their address based on their demand and previous delivery date. This process is made computerized and the customer's name, address and stock details are stored in a database. Based on this the billing for a customer is made simple and easier, since a customer order for gas can be accepted only after completing a certain period from the previous delivery. This can be calculated and billed easily through this. There are two types of delivery like domestic purpose use delivery and commercial purpose use delivery. The bill rate and capacity differs for both. This can be easily maintained and charged accordingly.
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Recently uploaded (20)
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
3. production experiments magazine
- 2. Process • I have used a photo from the internet of a fish to use as my background, I enlarged the photo so that it would fit on to the A4 page to fit the magazine size. • I added text onto the photo using the text tool and added “Sport Fishing” • I changed the font and colour of the text using the tools at the top of the page • Doing this has given me a title for my magazine and changing the fonts and colour has made it more eye catching and more realistic.
- 3. Process • I have added more text at the top of my magazine giving it extra detail and make it look realistic. • I have added colour on to the top of the page with some text as it helps to show the more important parts. • Different fonts have been used on these parts of the text this adds effective to the cover and makes it look more exciting and entertaining. • Adding these have progressed my magazine as it has started to look more like one just by adding a few bits of detail.
- 4. Process • More text has been added on this part of the process as I have added more information for the magazine. • I have added colour on to some parts of this section as it helps to grab attention on important bits of the magazine. • The font I chose is bold so that it stands out from the rest of the magazine. • This helps to add detail to the magazine and make I look realistic and grab peoples attention with the information shown on the font of it.
- 5. Process • I have used the shape tool to add a circle shape on to the front. • The colour of the circle used is a different colour used on the whole of the magazine as it helps to make I sand out more and grab attention to what it is about. • It is a good plug used to attract people. It says “ A BETTER WAY TO FIGHT ANY FISH” this is a good way to get people interested as if they are trying to look for this information they can see it on the cover and attract them straight away. • Colour is used on here also o make the important parts stand out.
- 6. Process • This is the last process as a few bits of detail have been added onto the magazine. • A barcode has been added onto the magazine as it is a little detail that makes a difference as it makes the whole thing look realistic • More text was added at the bottom of the page just to add more. • All the last bits of the process have made the whole magazine look real and look exciting for the audience.
- 7. Reflection • What elements of your experiments will you include in your final product? • I will include pops of colour onto my final product as I think it brings attention to the product and makes it more interesting. • I will add a barcode at the bottom as it looks more real and shows what the product is. • Having a bold title at the top helps with attraction and grab attention to the magazine and show straight away to the audience what the magazine is. • I want to include a part on my magazine where I plug something included in the magazine and make it stand out from the rest to grab attention for the audience to be interested.
Editor's Notes
- Discuss the tools and processes used in your experiments
- Discuss the tools and processes used in your experiments
- Discuss the tools and processes used in your experiments
- Discuss the tools and processes used in your experiments
- Discuss the tools and processes used in your experiments