Gfe Mayur Vihar Call Girls Service WhatsApp -> 9999965857 Available 24x7 ^ De...
mohamed daowod cv
1. Curriculum Vitae
Mohamed elsayied daowod
PLANT INSPECTOR
QC/WELDING INSPECTOR
MECHANICAL ENGINEER
0TUmoh.daowod@gmail.comU0T
U00201069400659
Year of Birth: 1984Nationality: Egyptian
USummary of Experience:
• I have more than 9 years experience as senior QC, welding ,plant inspector engineer as
mechanical engineer for various Oil & Gas ,petrochemical ,refinery and heavy industrial
construction for processes piping, pipe lines, storage tanks, heaters ,heat exchanger,
structural steel and pressure vessels.,
• carrying out in-service inspection internal and external for all equipments pressure vessels,
process piping ,heat exchanger and storage tanks , working as plant inspector at more than
5 shutdowns inside Egypt and outside
• calculating corrosion rate based on the previous corrosion history and base line reading of the
equipments and piping.
• recommending repairs based on the visual inspection and nondestructive examination finding.
• carrying out inspection of equipments and piping based on the guide lines of API
510,570,571,572,573,653,650 etc and client specification.
• preliminary inspection of pressure vessels,columns,heater,heat exchanger,tank to check the present
conditions
• working at onshore and offshore fields, certified from API ,AWS ,ASNT and familiar with American
standard codes as a guide at new and in-service inspection.
• reviewing quality control plan,WPS,PQR,WQT ,ITP,for repair and construction of
piping,heaters,tanks,furuances and boilers.
• reviewing method statement/procedures for consumable control ,weld repair, purging of stainless
steel piping,hydro test, pneumatic test MPT,PT,RT,UT and PWHT.
• inspection and release of plates, pipe materials from approved vendor locations.
• witnessing and reviewing hot tapping, split tee welding and NDT as per API 2201 and client
specification.
• preparing technical inspection report for the piping and equipment .
• preparing of work packs of piping and equipments for shutdown jobs, including preparation of
inspection point (TML and NDT location ).
• coordinating and controlling plant inspectors and NDT technicians during major shutdown
inspection, during commissioning & start-up.
• Third party auditor on companies in the construction phases of the projects.
• familiar with selection and usage of welding electrodes, filler materials.
• Maintenance site engineer for static equipments in the capital shutdowns and periodic
Repairs.
2. Curriculum Vitae
UExperience through many multinational companies as:
(BP,ROO RUMAILIAH) ,oil and gas elicitation
(ENI,ZFOD ZUBZIR) , oil and gas elicitation
(ENI, PETROBELL) ,oil and gas elicitation
(BUREAU VERITASE) ,inspection company Abu Dhabi
(TÜV nord Egypt),in service pressure vessel inspection
(EBIC) ,ammonia elicitation industry from gas
(SCIMITAR),oil and gas refinery
(EIPET) ,polly ethylene industry
(ORASCOM) , oil and gas construction
(PETROJET), oil and gas construction
(ECG) Egyptian consultancy group
(ENERGIA), steel structure construction
(EMC), maintenance company
(APM), maintenance Company
UEducational Background:
B.Sc. Mechanical Engineer
2001>2007 Akhbar elyom ,faculty of engineering
Mechanical, Production department (Grade PASS)
Graduation Project design and execution of a pipe bending machine (Grade Excellent)
UTechnical Courses:
Certified no #67415 and valid to August 2019
Certified no #68143 and valid to september 2019
Certified no #62424 and valid to November 2018
Certified no #54759 and valid to November 2017
• Storage tanks inspector API 653.
• Risk based inspection RBI, API 580.
• Piping inspector API 570.
• Pressure vessel inspector API 510.
Certified no #12102081 Renew certificate and valid to
October 2018
• CWI ,welding inspector AWS .
Certified Level II
Certified Level II
Certified Level II
• Radiographic Testing (RT)ASNT.
• Ultrasonic Testing(UT)ASNT.
• Magnetic Particles Inspection(MPI)ASNT
.
Certified Level II
Certified from unigraphics NX.
• Dye Penetrant (DP) ASNT.
• Drawing ,design CAD software
UWork Experience:
QA/QC INSPECTION ENGINEER.
(ECG EGYPTIAN CONSULTATION GROUP) from may 2016 to present.
follow up supply,welding,inspection,install,commissioing and testing new chemical polymers plant
containing new carbon and stainless steel piping ,tanks ,reactors, premixer ,finisher and heat exchanger
at wadi elnatroon according to American codes and the consultant specs requirements.
3. Curriculum Vitae
AS plant inspector (SHUTDOWN)
(ENI , ZFOD ) at Iraq from December 2015 to April 2016.
(BP , RUMIALIAH ROO) at Iraq from march to November 2015 .
carrying out in-service inspection internal and external for multi pressure vessels, process piping
and storage tanks
calculating corrosion rate based on the previous corrosion history and base line reading of the
equipments and piping.
recommending repairs based on the visual inspection and nondestructive examination finding, and follow
up recommending repairs to perform hydrostatic test.
As integrity inspection
( dana ,wasco ,trust) at Egypt from December 2014 to march 2015.
Performs inspection as integrity RBI inspector TML and NDT location for process gas lines at plant
according to API 580,581.
As plant inspection engineer and welding inspector:
(Eni, Petrobell Abu rudies) at Egypt quality control co, from December 2012 to
December 2014
Professional Experience:
Performs inspection and issue recommendations reports for heat exchanger, gas boat, horizontal
separator vessels , oil desalter vessels, knock out drums, low pressure cylinder storage tanks and
piping systems according to codes (ASME,API,AWS) and company requirements, Includes noting
observations on cracks, pits, thinning and any other pattern of erosion, corrosion with analyses for
failure damage mechanism.
Responsible for internal visual inspection and maintenance repair activities during the mega
shutdown.
Supervision and provision of necessary technical guidance to contractors in inspection,
NDT,welding,fabrication activities and other related activities.
Monitoring the service of contractors performance and develop service progress report.
Prepares preliminary reports on inspections and NDT tests.
Inspection of materials, consumables, and welding process.
Review & approve WPS & PQR, witness WQT and monitor welder.
Inspection during fabrication and construction of piping, pipe lines, vessels and tanks.
Monitor performance of subcontractors by carrying out surveillance inspection of piping, vessels,
tanks, and Tie in pipeline.
Radiographs Interpretation, witness application of NDT and endorse QC reports.
Review test packages, making punch and outstanding lists.
Witness hydrostatic tests and pneumatic tests on pressure equipment, valves and pipelines as per
Company policy.
Works onshore and offshore.
4. Curriculum Vitae
Activity:
Follow up welding inspection for new storage tank water firefighting and pipe with fitting according
to API 650. (D 18 m – material SA 283 G.C.) .
Follow up fabrication , welding and inspection for 10” pipeline oil trunk line from RAS GARA to
PETRECO plant according to API 1104 (23.5 km - material API 5L GR.B)
Follow up fabrication, welding and inspection for 3 manifolds 18 branch according to ASME B31.3,
B16.5.
Follow up fabrication, welding and inspection for process piping inlet and outlet at new land refinery
station at petreco plant according to ASME B31.3, B16.5.
Follow up inspection for process piping inlet and outlet from heat exchanger, gas boat, separator,
flotation according to API570.
Follow up fabrication, welding and inspection for 3 fire tube at heater treater.
Follow up fabrication, installation and inspection for piping attached to heat exchanger inlet and
outlet according to API 570 , B16.5.
Follow up fabrication, installation and inspection for 3 manifolds 8 branches according to ASME
B31.3, B16.5.
Follow up fabrication, installation and inspection for 1 new tank according to API 650 (diameter 24m-
SA 283 grade c)
Performed hydrostatic test for 4 heat exchangers type AES at (shell side, tube side) and follow up
repair recommended retube 3 bundles with new according to TEMA and manufacture requirement.
Performed internal inspection visually and thickness survey for separator (D 3.5, MAWP 8.5 bar
MDMT13C), and follow up repair activity as recommended at report according to (API 510, ASME
VIII)
Follow up inspection more than 5 low pressure storage tank fixed roof and floating roof, according to
API 653 (diameter 48 m – material SA 283 G.C).
Performed internal and external inspection visually and thickness survey for 3 tower (H 12 MAWP 5.5
BAR MDMT8 C), and issue result reports according to (API 510, ASME VIII)
Follow up inspection for more than 10 heaters horizontal and vertical to recertification the
insurance with RINA rep according to API 574,510 codes, working as (check internal tube and
supports, check safety valves, perform cause an effect)
Performed internal and external inspection visually and thickness survey for gas boat (H 14 m,8.5
bar, material SA 516 G70), recommended a report to execute filling by deposit weld and cladding
damaged area.
Performed inspection for firefighting pipes and manifolds at all refinery plant petreco station
according to API 570.
Performed inspection for lubricant tank to turbine at LPG station.
Work as NDT inspector:
(MASSA consulting and inspection company) From December 2009 to October 2012
Work experience and activity:
Client: EIPET, Inspected new construction manifold Piping and fitting according to acceptance
criteria ASME B31.3 code by interpretation shooting films Radiographic test .
Client: EBIC, Responsible for internal visual inspection& maintenance repair activities of pressure
vessels, piping during the plant mega shutdown.
Client: EMC, Inspected Thermal Heater Piping according to acceptance criteria ASME B31.3 code by
interpretation shooting films Radiographic test
5. Curriculum Vitae
Client: SCIMETAR, Inspected Steam injection3",4" according to acceptance criteria ASME B31.3
code by interpretation shooting films Radiographic test
Client :H.GAS, Inspected 8 KM Pipe Line for new manufacture cement at bani sweef, according to
acceptance criteria API 1104 code by interpretation shooting films Radiographic test
Client :EMC, Inspected 3 bottom tanks using Thickness survey method by Ultrasonic Device
Client: ENERGIA, Inspected new construction structure for elgurda airport by Ultrasonic Device
According to AWS D1,1.
Client :ORASCOM, Inspected three new storage tank at 6 october city new power station using
vacuum box, magnetic particles and penetrant test
Work as mechanical engineer
Military Forces: from April 2007 to October 2009
Service at army forces as mechanical engineer and maintenance heavy duty cars.
Computer skills:
Windows Operating system,
Microsoft office (Word, Excel, Power Point).
NX, AutoCAD (2D- 3D)
USkills and objective:
Ability to work under high pressure.
Have a very good creativity skill.
Ability to learn new technologies and sciences.
Ability to work within team work.
Conceptual thinking in solving problems and achieving goals.
Increase Organization Competitive.
Increase Quality of Organization.
Increase Activity of Work.
Decrease Time and Cost.
Ability to travel to anywhere to work.
ULanguages:
Arabic Mother Tongue
English Fluent
References: Furnished Upon Request