1. Name: Hossein Pournaimi
Address: Parroquia 15, 22520 Fraga (Spain)
Email : hosein.pournaimi@its-grp.com
pournaimi@yahoo.com
Born :23.12.1977
.
PROFESSIONAL EXPERIENCE
i.t.s
Institute of Technical
Services
° Inspect welds for quality standards.
° Performed testing of products at specific steps to
ensure meeting of quality measurements, including
dimensions, performance and correct chemical
makeup
° Inspect all tanks, pressure vessel and heat exchanger
in accordance to the standards laid by API for the
various storage tanks such as API- 620, 650, 653 and
682.
° Rejected inferior products and inferior welds.
° Read and interpreted engineering documents.
° Performed statistical analyses using computer models
to test conformance to specifications.
° Worked as a part of the management team to achieve
increased productivity while reducing error rates.
GERMANISCHER
LLOYDS
INDUSTRIAL
SERVICES LTD
° Review and Approval of MTC and ITP ‘S.
° Controlling of all QC activities and Documents in
Piping, Mechanical, Material receiving, NDT,
Welding and Civil Sections.
° Inspection and Review of Documentations.
° To assist Quality Control Manager for making
Procedures, Method of Statements, and Acceptance
Criteria.
° Material receiving, inspection, identification and
traceability, preservation and protection.
° Inspecting materials and equipment on receipt and
preparing receiving inspection reports
° Maintaining Material Test Certificates and records.
° Randomly verifying material heat number transfer
2010 to 2013

2. Abu Dhabi Gas
Industries Limited
(GASCO)
° Periodically verification of materials and equipment
storage, preservation and protection.
° Radiography Inspection Inspected all equipment by
disassembling them.
° Performed complete inspection of the products and
followed the Standard Work Procedures and Policies
while inspecting.
° Prepared records of all the inspection work carried and if
required provided sketches of the same.
° Administered the process by using special calibrated
tools and simple hand tools for inspecting the products.
° Studied and interpreted the assembly blueprints and
performed the inspection in accordance to the technical
specifications.
° Coordinated with the management and performed the
inspection work as directed.
2007 to 2012
SUMMARY OF QUALIFICATION:
Over 10 years of proven experience in all aspect Technical inspection consisted off:
o Profound knowledge of the centrifugal compressors, steam turbines and reciprocating compressors
o Operational knowledge of the precision measuring equipment
o Ability to inspect welds, casting and forgings with the help of the UT instruments
o Ability to maintain the equipment and ensure its proper functioning
o Skilled to conduct visual examination of the equipment
o Outstanding communication skills
o Proficient in using measurement tools in inspection
o Ability to work with written procedures, structural drawings and specifications

3. Inspection Experience History:
COMPANY: Dresser Rand(france)
PROJECT: PURCHASE ORDER (General Pourpose Turbine)
CLIENT Sulzer pump india, Ltd
POSITION: FIELD INSPECTION(QC, PMI,Mechanical Running test)
DURATION: 13.03.2016 UP TO 16.03.2016
COMPANY: Stahlwerk Thuringen GMBH (Germany)
PROJECT: Structural Steel Rolled Sections
CLIENT: PETROFAC
POSITION: Technical Inspector(QC,Geometry and acceptance deviations,Mill test,Final inspection)
DURATION: 18.03.2016 up to 19.03.2016
COMPANY: Borzig ZM Compression(Germany)
PROJECT: South Pars Phases Gas Compressors
CLIENT: P.K.S.K
POSITION: Thecnical Inspector(Witness hydro test,Mechanical Running test,Drawing ,final, packing inspection)
DURATION: 21.03.2016 up to 4.04.2016
COMPANY: Sulzer pumpen (Germany)
PROJECT: DHT project at BPCL Mumbai(Pumps)
CLIENT: EIL
POSITION: Thecnical Inspector( hydro/Air,MTC ,Rotor balancing test)
DURATION: 05.04.2016 up to 07.04.2016
SKILLS
Industry Skills:

4. Quality assurance and Quality control (QA/QC(
• QA/QC documentation and review:
o ITP, welding Procedure and material Analyze check
o Review of Certification
o Test and review of final booking
• Inspection and auditing
o Visual and dimensional Inspection for mechanical equipment (based on different codes)
o Rolling/ bending inspection
o NDT, PWHT and Hardness Test Inspection (ASME VIII, ASME B31.3, API 650)
o Final line checks Inspection and punch lists preparation (ASME B31.3)
o Hydro test/ pneumatic test, cleaning, reinstatement and leak test Inspection.
o Wrapping and painting activities Inspection.
o Shipping and Packing Inspection.
o Vendor’s workshop auditing
o PQR and welders’ qualification test
o General inspection procedure preparation for Oil, Gas, Offshore and petrochemical tenders
EDUCATION/DEGREES
- Mathematic in Isfahan High school
- Electronic Engineering (B.Sc. Noor university ) Iran
- Metallurgical (M.Sc. Amirkabir University –Tehran) Iran
- NDT Level II according to SNT-TC-1A
PROFESSIONAL CERTIFICATIONS & LICENSING
o UT, MT, PT, RT, VT Test NDT level II according requirements ASNT-TC-1A
o CWI (certified welding inspector) Based on AWS QC1 Requirements
o Training certificate in WPS,PQR and WPQ accordance with ASME SEC.IX
o Integrated Management System courses / Iran
o Pump and valves Inspection Course / Iran
o Pressure vessels Inspections course/ Iran
o Comprehensive Industrial Safety/IMQ Academy
o Advanced Fire Prevention and Fire Fighting/Iran
o Safety training course (OHSAS 18001:2007)
LANGUAGES KNOWLEDGE & SKILL SOFTWERE

5. English : Fluent
Software Skills:
o Internet
o Microsoft Office (Excel, Word, PowerPoint)
o Windows advanced
o Visual basic
o C++
o AutoCAD
o Matlab programing
o Solidworks
Thank you. I hope my qualifications match your needs
17.04.2016
Hossein Pournaimi

6. English : Fluent
Software Skills:
o Internet
o Microsoft Office (Excel, Word, PowerPoint)
o Windows advanced
o Visual basic
o C++
o AutoCAD
o Matlab programing
o Solidworks
Thank you. I hope my qualifications match your needs
17.04.2016
Hossein Pournaimi