Robin Mathew Koshy has over 8 years of experience as a QA/QC welding and piping inspector working on various oil and gas projects in Saudi Arabia. He holds certifications in welding inspection from CSWIP and API, as well as NDT certifications. His responsibilities have included inspection of welding, piping, materials, and coordinating with engineering on projects adhering to international codes and standards. He aims to contribute his skills and experience to a progressive organization.

1. CURRICULAM VITAE
Page 1 of 5
ROBIN MATHEW KOSHY
QA/QC WELDING INSPECTOR (ARAMCO APPROVED)
(SABIC, SADARA, ADCO APPROVED QA/QC WELDING & PIPING)
KSA Driving License No-2360139527
E-mail:parayilrobin@gmail.com
MOBILE NO: +966-506310097
CARRIER OBJECTIVE
A Dynamic innovative with Good knowledge and Engineering skills, working in a
Competitive environment seeking to pursue a challenging career opportunity to contribute to the growth
of a progressive organization. As an enterprising engineering professional that complements leadership
qualities.
CERTIFICATION
 CSWIP 3.1 Welding inspector (Cert No: 65501) Exp-18-05-2022
 API-570 - Piping Inspector Certification -(Cert No: 69285) Exp-30-11-2019
 Diploma in Mechanical Engineering in MVJ Polytechnic B’lore Reg no-366ME04034
 ASNT Level II
Radiographic Testing (RT)
Ultrasonic Testing (UT)
Magnetic Particle testing (MT)
Liquid penetrant testing (LPT)
KNOWLEDGE IN INTERNATIONAL CODES & STANDARDS
 ASME SECTION IX ,II and V
 ASME B31.3
 API-570,API 1104.
 Exposure in Saudi Aramco Standards(SAES,SAEP,SAMSS)
EMPLOYEMENT HISTORY
YEAR OF EXPERIENCE: 8 YEARS
 PROJECT : FADAHLI GAS PROGRAM PROJECT
 CLIENT : SAUDI ARAMCO,
 CONTRACTOR : Technicas Reunidas/Saudi Binladin Group-PCM Division
 POSITION : QA/QC WELDING INSPECTOR,
 PEROID : JANUARY 2017 TO TILL DATE.
 PROJECT : IBN-RUSHID NAPHTHA SUPPLY-B PROJECT
 CLIENT : SAUDI ARAMCO/ SABIC,
 CONTRACTOR : Saudi Binladin Group-PCM Division ,
 POSITION : QA/QC WELDING INSPECTOR,
 PEROID : MAY 2016 TO DECEMBER 2016.

2. CURRICULAM VITAE
Page 2 of 5
 PROJECT : Coke & TAR Removal System(80/54 Conversation Project)
 CLIENT : SABIC
 CONTRACTOR : Saudi Binladin Group-PCM Division
 POSITION : QA/QC WELDING INSPECTOR,
 PEROID : APRIL 2015 TO APRIL 2016.
 PROJECT : SADARA
 CLIENT : SAUDI ARAMCO/DOW
 CONTRACTOR : DAELIM/Saudi Binladin Group-PCM Division
 POSITION : QA/QC WELDING/PIPING INSPECTOR,
 PEROID : JANUARY 2014 TO MARCH 2015.
 PROJECT : SASREF Turn Around(Shut Down)
 CLIENT : SASREF
 CONTRACTOR : Saudi Binladin Group-PCM Division
 POSITION : QA/QC WELDING/PIPING INSPECTOR,
 PEROID : NOVEMBER 2013 TO DECEMBER.2013
 PROJECT : Quasahwira Field Development Project (QFD)
 CLIENT : ADCO/NPCC
 CONTRACTOR : Consolidated contractors. Intl Co (CCIC),Abudabi,UAE
 POSITION : QA/QC WELDING/PIPING INSPECTOR,
 PEROID : MAY 2011 TO AUGUST 2013.
 PROJECT : CITY GAS DISTRIBUTION PIPELINE PROJECT
 CLIENT : INDRAPRASTHA GAS LIMITED
 CONTRACTOR : UNIVERSAL ENERGY LIMITED,NEW-DELHI
 POSITION : QA/QC INSPECTOR PIPELINE
 PEROID : DECEMBER 2010 TO APRIL 2011.
 PROJECT : SaudiKayan Petrochemical Complex Phenolic Project
 CLIENT : SABIC
 CONTRACTOR : TR/Nasser.S.Al-Hajari Corp
 POSITION : QA/QC PIPING INSPECTOR,
 PEROID : NOVEMBER 2009 TO OCTOBER 2010.
 PROJECT : SaudiKayan Petrochemical Complex Olefins Project
 CLIENT : SABIC
 CONTRACTOR : KBR/Nasser.S.Al-Hajari Corp
 POSITION : PIPING SUPERVISOR
 PEROID : SEPTEMBER 2008 TO October 2009
SUMMARY OF WORK EXPERIENCE:
Having more than 8 years’ experience in Oil & Gas sector, NDT reports and Related Field of
Engineering, Procurement in construction of Pipeline Plants, piping Inspection, welding inspection,
activities like welding consumable storage, handling,, issue and conditioning., In process welding
Inspection, Post Welding Inspection,, coordinating with NDT activities, Carried out PWHT Inspection
and Inspecting of Hardness Testing construction projects according to international codes and

3. CURRICULAM VITAE
Page 3 of 5
standards. Monitored Pipeline activities, trenching, stringing, bending, welding, lowering,, HDD
Drilling, tie-in, coating, holiday test and hydro test as API 1104 & Client Standards
JOBS & RESPONSIBLITIES AS WELDING INSPECTOR:
 Experienced in QA works by preparing, submitting quality documents and resubmission of
documents with Comments resolution sheet (If there any comments from Client
SAPMT/Proponent & SAPID’s).
 Witnessing Fabrication shop For Approval
 Preparing Preliminary WPS for PQR and WPS based on third party PQR as per ASME IX and
initial submission to CSD and PMT and PID for approval as per SAEP-352
 Ensuring the welding machines, ovens and tools calibration is valid and working properly
 Raising RFI’s in QMIS for inspection notification to Saudi Aramco PMT and PID.
 Receiving inspection of welding consumables with Aramco representative
 Good knowledge in material of carbon steel low temperature carbon steel, stainless steel, alloy
steel.
 Preparation and submission of JCC card for welders.
 Inspection of joints & its details based on isometric drawings, WPS & welders before starting
welding
 Doing Pre/During/After welding Inspection including welder/welding operator audit for compliance
with WPS.
 Preheat, inter pass temperature & heat input checking as per approved WPS
 Perform welding parameter check to ensure according to the Approved WPS and Project
Specification
 Conducting tool box meeting with supervisor, foreman, fabricators, and welders.
 Verifying baking, holding and electrode issuance records
 Maintaining log book for daily activities and updating daily RFI status.
 Issuing Nonconformance report if there is any deviation from procedures, codes or standards/ it will
impact the quality requirements.
 Maintaining continuity records for welders & giving retrain and retest those fails to meet quality
requirements.
 Socket joint gap checking as per the ASME B31.3.
 Preparing Weekly welding repair rate report(WRR)as per SATR’s W-2019 & 2008
 Requesting NDT for weld completed joints as per procedure requirements.
 Review for the Percentage of RT shoot for welder or welding joints as per project requirements.
 Verifying Positive Material Identification of Low alloy, Stainless steel
 Witnessing NDT, PWHT, and PMI, Hardness, Impact test and other
 To review NDE reports and PWHT documents as per standards.
 Review of documents for test packages with client. Included P & ID, drawing, welding Summary,
material take off and all reports for hydro test
 Discuss with engineering Department for any drawing clarification
 Review As built Drawing and Final Quality Dossier
 Inspection of line check as per P&ID / ISO drawings and to raise the punches (A /B) in punch list

4. CURRICULAM VITAE
Page 4 of 5
JOBS & RESPONSIBLITIES AS PIPING & PIPELINE INSPECTOR
 Receiving inspection of pipes, fittings and welding consumables and coordinating with Client
representative.
 Carrying out Material Inspection
 Verification of Material Storage and Preservation system
 Familiar with fit-up of piping, and pipelines for dimensional accuracy and material being used
 Monitored Pipeline activities, trenching, stringing, welding, Bending, lowering, tie-in, coating,
holiday test and hydro test as API 1104 & Client Standards
 Monitoring of welding consumables as per issuing and baking register
 Inspection of joints & its details based on isometric drawings, WPS & welders before starting
 Verify welder job clearance certificate (JCC), before starting welding.
 Preheat, inter pass temperature & heat input checking as per approved WPS.
 Carried out visual inspection on various pipeline activities like pipe bending, stringing, lowering
Cleaning and Gauging
 Coordinating and witnessing of Horizontal Directional Drilling (*HDD) of pipelines
 Carrying out Visual Inspection on shop and field weld for various materials piping according to
ITP, method statements, project standards and codes
 Flange alignment checking and ensure flange faces smooth without damages before installation of
gaskets
 Requesting NDT for weld completed joints as per procedure requirements.
 Review for the Percentage of RT shoot for welder or welding joints as per project requirements
 Verifying Pipeline cleaning and Gauging Inspection Record
 Inspection of line check as per P&ID / ISO drawings and to raise the punches (A /B) in punch list
 Preparing test packages and verify all documents against P&ID and line number
 Monitoring Instrument Calibration Certificate ,Test Equipment Data Sheet and Pigging Data
Sheet
 Verifying Water Analyses Report
 Verifying Pipeline water filling , Temperature Stabilization ,Hydro test Hold time and Pressurized
Records
 Monitoring after Hydro testing De-watering,Swabbing,Drying Activities
 Issues related to valves ,special instruments, insulation and bolted joints to be noticed to the
engineering and construction
 Inspection of gaskets and verifying with drawings whether installing suitable gaskets
 Verification of gaskets and free from damage particularly on flange seating areas
 Inspecting gaskets like ring, spiral wound, asbestos, rubber types.
 Inspection of flanges as per isometric drawings
 Inspection of all bolts and nuts threads are in good condition, not corroded and molykote applied
properly.
 Reinstatement of complete packages along with final bolt torque as per client requirement
JOBS & RESPONSIBLITIES AS PIPING SUPERVISOR
 To ensure the project deliver safely as per project schedule, budget and meet the requirements of
the project in terms of: quality, reliability, operability and maintainability.
 Monitors inspect and expedite the piping fabrication activities carried out by contractor and their
subcontractors until completion of project.

5. CURRICULAM VITAE
Page 5 of 5
 Assists the construction manager for structural/piping work in all construction phases including
review of shop drawings, construction methods, pre-fabrication, erection, lifting, integration,
equipment installation, testing and completions as they relate to the discipline.
 Implements HSE requirements as per company specifications;
 Active in improvement of efficiency within the team, and proactive in team building within the
company team and co-operates with the team Engineers, the QC Coordinator, and the other
Construction Supervisors
 Assists in the resolution of technical query and NCR’s by monitors the correct implementation of
remedial and preventive actions and reports to the QC manager when corrective actions are
completed;
 Reports to the construction manager/HSE or QC Manager, all inappropriate conditions, which
occur during the construction execution Welding consumable requirement and control.
Computer Skills and Software’s:
 Computer Skills : Programming Installation, Typing
 Simulation Tools : Outlook.
 Operating Systems : MS. Windows 98/2000/XP/Vista/ Window 7 etc…
 Other Tools : MS Office (Excel, Word, PowerPoint,)
Personal details
Date of Birth 18-10-1985
Nationality Indian
Marital Status Married
Passport P-1389419
Place of issue TRIVANDRUM
Date of Expiry 02-11-2026
Languages known English, Hindi and Malayalam
DECLARATION
I hereby declare that the above information furnished above is true to the best of
my knowledge
Place: Saudi Arabia Robin Mathew Koshy
Date :