This document provides information about Mohamed Abdelgwad Saied including his personal details, education, qualifications, skills, and 10 years of work experience in inspection, welding, and QA/QC engineering for oil, gas, and petrochemical companies. It details his roles and responsibilities in various projects for companies like DNV GL, Qatar Petroleum, Qatar Petrochemical Company, ThyssenKrupp Industrial Solutions, Inspecta International, and others.

1. MOHAMED ABDELGWAD SAIED
- Egyptian, Male, Married
- Address: - B-Ring Road, Doha, Qatar
- Military Service: - Exempted
- Birth Date: - May 18, 1982
- Driving Licenses: - Egypt, Qatar
- Tel.: - Qatar: +97433821866, Egypt: +2 01005484829
- E-mail: - Private: m_a_saied@yahoo.com
Work: mohamed.abdelgwad@dnvgl.com
saied@qp.com.qa
Career Objective
I have ten (10) years experience in inspection, welding and QA/QC engineering in Oil/gas and petrochemical
industries along with extensive knowledge of inspection Codes and Standards. I have gained a broad range of skills
through my experience as QA/QC Inspection Engineer (Welding/Mechanical) with different companies and I hope
to join a progressive company where I can apply my knowledge and experience to contribute in the success of the
company while advancing my engineering and management skills.
Education
B. Sc. in Metallurgy and Material Science Engineering at May 2004.
Suez Canal University, Faculty of Petroleum and Mining Engineering
Languages
Arabic Mother tongue
English V. Good Command (write, read and speak)
Personal Skills
-Good communication and presentation skills
-Problem solving and analytical skills and work as a team member
-Ability to work with a broad section of highly specialized technical personnel
Qualification & Training Courses:
- CSWIP 3.2.2 – Senior Welding Inspector, Certificate no. 68712
- CSWIP 3.1 – Welding Inspector, Certificate no. 52258
- API 510 – Authorized Pressure Vessel Inspector, Certificate no. 58892
- API 570 – Authorized Piping Inspector, Certificate no. 43058
- API 571 – Advanced Corrosion & Materials Program, Certificate no. 61004
- NDE level II (RT, MT, PT, and UT) based on ASNT-TC-1A
- QMS Auditor/Lead Auditor based on ISO 9001:2008 (IRCA)
- Safe use of Industrial Radiography Equipment and safe keeping from Ionic Radiation training course from
Atomic Energy Organization
- Basic H2S & Confined Space Entry training courses from ENERTECH QATAR
- Successfully completed PTW Level "2" and qualified as Performing Authority from QP
- Corrosion at Petroleum Industries from Higher Technological Institute
- Managerial Skills Developing for Engineers from ASI (American Supplier Institute)

2. Ongoing Qualification Courses
- API 580 - Risk Based Inspection Professional
- API 577 - Welding Inspection and Metallurgy Professional
Experience & Knowledge
I) Welding and Non Destructive Examination
- Having good experience of preparing WPS & PQR and supervising & evaluating WPQT
- Having high experience of performing, supervising and interpretation of N.D.E. as RT, PT, MT and UT
II) CODE, STANDARD & SPECIFICATION
- Familiar with the international codes and standards e.g. ASME, API, AWS, and EN
- Familiar with multi international specification UHDE, TECHNIP, QP, BECHTEL, etc.
III) DOCUMENTION
- Preparing of ITP and MDR
- Preparing & check punch list of test packages
- Review of material & filler metal certificates
Work History
1) From JAN. 2014 till Now
Company: DNV GL – Qatar
Position: QA/QC Inspection Engineer
Projects Handled
A) From JAN. 2015 till Now
Company Qatar Petroleum –QP (Supplied from DNV GL)
Location Messaied - Qatar
Project QP Gas Operation (Mesaieed NGL Plants)
Position Plant Inspector
- On stream inspection for the piping integrity and periodic corrosion rate calculations, Condition
Monitoring Location identification and arrangement for UT thickness measurement
- Coordinate with the NDE coordinator and technicians to get the NDE done, Review all piping NDE
reports and findings and field verify as necessary during NGL-3 shut down.
- During on-stream inspection for piping based on corrosion loop, assess extent of corrosion,
vibration and records any abnormalities, selection of thickness measurement location, radiography
and other NDT method for data input of RBMI programmed.
- Collecting background data (review design data, operation & inspection history, and corrosion
monitoring results), making inspection checklist & determining failure mode, evaluating service
induced defects and recommendations to prevent reoccurrence
B) From Jan. 2014 to December 2014:
Company Qatar Petrochemical –QAPCO (Supplied from DNV GL)
Location Messaied - Qatar
Project EP3 Furnaces and Tank Project-QAPCO & Shut Down(GSD)
Position Mechanical Inspector

3. Review W.P.S., P.Q.R., and drawings related to Tie Ins piping connected to New Ethylene Tank, Mixed
Feed Cracker and New Furnaces according to specification and code
- Review and follow Job Safety Analysis (JSA) for different tasks during GSD
- Coordinate with operations, maintenance, process and corrosion engineers before and during GSD
for Tie In piping.
2) From Jan. 2013 till Dec. 2013
Company ThyssenKrupp Industrial Solutions – Egypt.
Project New Complete NA/LDAN Complex Project
Location Ain Sokhna - EGYPT
Position Piping QA/QC Inspector
- Performs Pipes line up check, ensuring that all installed pipe/fittings are to the correct specification
and that the material is in accordance with the specified Material Traceability requirements.
- Follow up of test package, punch list, hydrotest and PWHT activities, etc.
- Prepare W.P.S. & P.Q.R., and Review drawings and specification. (ASME-Codes)
- Ensure that all Welding, Heat Treatment, any hardness testing, Inspection and Non-destructive
testing are in compliance with the relevant codes and specifications.
3) From June 2012 till Dec. 2012 "End of Project"
Company Inspecta-International “Qatar Petroleum (QP) Contractor"
Project INPLANT PIPING SURVEY FOR PLANTS WITHIN THE DUKHAN FIELDS
Location DUKHAN – QATAR
Position Authorized Piping Inspector
- Survey of all process and instrumentation piping at Fahahil and Khatiya Area Plants in the Dukhan
Fields, to determine the extent of internal and external corrosion and any other forms of
deterioration and defects according to Scope of Services conforming to API 570 requirements
- Follow all the Examination and Inspection (VT, MPI, RT, UT, and Vibration Test) required being
done and acceptable according to the Spec. and Code.
4) From Jan. 2011 till June 2012 "End of Project"
Company: GUPCO (Gulf of Suez Petroleum Company)
Project: Shut Down at SHOAB ALI & ALFA Complexs
Location: Ras Shukeir – EGYPT
Position: Off-shore Inspection Engineer.
- Coordinate with operations, maintenance, process and corrosion engineers when required for
static equipment and piping condition monitoring and developing inspection plans for
enhancement of their integrity. (ASME B31.3)
- Having good experience in Flange managements and using Hydra-tight and Hi-Force programs
for flanges tighten
- Ensure that all welding and NDE requirements of Sealine joining to be done according to the
specific code (DNV-OS-F101-2007) and specifications.
5) From Aug. 2007 till Jan. 2011
Company: PETROJET – Egypt.
Position: QC Welding Inspection Engineer.
Projects: IDKU WORKSHOPS- multi-projects &
EL SOKHNA-ABOU SOLTAN Gas Pipeline 36"
- The Scope of work in all Projects includes and not limited to:

4. Monitor Welder performance and their repair rates in accordance with job quality requirements.
Review of RT films quality and review of M.D.R. of equipment for the multi-projects at IDKU
Workshop.
Coordinate with the clients, and client Project Development Team on routinely inspection and
activities to be done.
Major projects done at Idku workshops:
• Fabrication of steel structure (more than 5000 Ton), for UHDE, GASCO, E-METHANEX, BADR EL-
DEN, and KHALDA. (AWS D1.1)
• Fabrication of more than 30 pressure vessels -U stamp- for KHALDA project (client PETROFAC), E-
STYRENICS, TUNA project (PETROBEL), and PETROTRADE. (ASME VIII Div. 1)
• Fabrication of 2 Towers -U stamp- for E-STYRENICS project
• Fabrication of 4 pressure vessels for PETROBEL
• Prefabrication of 10 tanks ( client E-METHANEX )
• Fabrication of 3 tanks for KAHROMICA Company (API 650)
6) From November 2004 to July 2007
Company: ARCOSTEEL – Egypt.
Position: QC ENGINEER.
I performed a number of tasks as a Metallurgist (Quality Control and Process Control Engineer) as,
• Surface inspection and quality decision of billet after conditioning by Magnetic Particles
• Inspection (MPI), Also Billet Inspection (Cast structure) from internal defects Such as (Voids
Cracks,
Non-Metallic Inclusions and Segregation)
• Using macro-etching test for as-cast and rolled steel products with Hydrochloric acid
• Problems reporting during the shift and find solutions and Preparation of data for quality assurance
All certificates are available upon request and I hope that my C.V. will fulfill your requirements