1. Nour Eldin Ahmed Mohamed Mobile: +971551075210
Senior Mechanical Engineer Email:noureldin.ahmed@hotmail.com
Nour Eldin Ahmed Mohamed
AMIMechE Senior Mechanical Engineer
CAREER OBJECTIVE
A Certified Professional Mechanical Engineer offering over 8 years of diversified experience with equally impressive skills, seeking a
key profile with a respected organization to utilize accrued skills in the field of Engineering, Procurement and Project Management.
KEY SKILLS
Piping Design, Package Design, Equipment Selection/Sizing, Procurement and Project Management.
Key Account Management, Budgets, Sales Negotiation, Strategic Planning and Implementation.
Fiscal Management, Proposal Development, Deal Structuring and Formulating Policies/Procedures.
EDUCATION
AMIMechE/IEng Institute of Mechanical Engineers, London (2015)
Associate Professional Engineering Registration Membership Certification.
Bachelor of Engineering, Mechanical Engineering ( 2002 – 2007)
Faculty of Engineering, Alexandria University
COMPUTER SKILLS
Plant Design and Management Systems (PDMS equipment and piping modules).
AFT Impulse Steady and Surge Hydraulic Analysis.
Primavera P3 e/c version 6.
AutoCAD (2D/3D).
Microsoft office (Word, Excel, PowerPoint).
PROJECT MANAGEMENT COURSES
Successfully completed the technology project management professional based training courses offered by
THOMSON – NETg, certificates were given based on passing several assessments.
Project Management Essentials Planning a Project.
Project Management Essentials Project Scheduling and Budgeting.
Project Management Essentials Controlling and Closing a Project.
Project Cost Management.
Project Time Management.
Project Scope Management.
GENERAL EXPERIENCE SUMMARY
I- Technical and Design Experience
Preparing/Reviewing datasheets for Mechanical Equipments & Components such as Valves, Pumps, and Pipes.
Acquainted in preparing design documents for Pressurized Tanks according to ASME Sec VIII Div.1.
Pioneered in pipe sizing calculation, pressure drop calculation, flanges rating, relief valve calculation, NPSHA & piping schedule
interpretations.
Proficient use of international standards such as ASME B31.3, B36.10, B36.19, B16.5, API 610 & ASME Sec VIII Div.1.
III- Computer Aided Design Software Experience
Experienced in working for PDMS modules including Equipment Modeling, Piping Designer & Isometric Extraction.
Experienced in using AFT Impulse to perform Hydraulic Analysis (Steady state and Surge Cases).
IV- Field Experience
Proposing redesign solutions for the field obstacles (clashing, mismatching & lack of material item).
Supervising construction, fabrication activities and taking necessary actions to maintain satisfactory standards.
Witnessing the Pre-Commissioning & Non-Destructive Testing includes Hydro-Test, Chemical Cleaning & Air Blowing.

2. Nour Eldin Ahmed Mohamed Mobile: +971551075210
Senior Mechanical Engineer Email:noureldin.ahmed@hotmail.com
WORK EXPERIENCE
Proserv Middle East (August 2013 – Till Present)
Leading multinational manufacturing company in the oil & gas field specialized in chemical injection packages, well head control
panel, subsea and drilling technology.
Position: Senior Mechanical Design Engineer (Proposals / Detailed Engineering)
Scope of work:
Working for Chemical Injection Systems / Well Head Control Panels portfolio of Control Systems core business of Proserv.
Developing the related design documents such as Atmospheric and Pressurized Tank design and sizing calculation according
to ASME Sec VIII Div.1 as well as Pump selection according to API-675 and API-610.
Knowledge of component selection according to ATEX hazardous area classification requirement.
Drafting all the related design documents during bidding stage and detailed engineering stage such as (Technical Offer, Pump
Datasheet, Pulsation Dampeners Sizing, Valve Datasheet, sizing and selection of Pressure Relief Valves according to API-520).
Formulating preliminary and detailed P&ID in accordance with the client operation & control philosophy.
Preparing the detailed costing and commercial offer and assisting the legal team in contract formation.
Conducting commercial negotiations with sub-vendors to minimize the overall cost and increase the profit margin.
Authorized to delegate responsibilities among mechanical designers for the drafting work.
Timely executing the proposal engineering requirements within client dictated bid closing dates
Adhering to the compliance of submission for design outputs during detailed engineering stage within schedule
Evaluating quality engineering deliverables generated by other team members in engineering department
Monitor and manage project schedule, project budget and project risk.
Assisting in Bid evaluation for large scale Projects.
Performing as single point engineering coordinator involving Process Control Systems for Oil & Gas sector.
Active participation in reducing in ‘Cost of Poor Quality’ (CoPQ) entries against engineering department.
ACHIEVEMENTS
Winner of Proserv regional engineering competition for presenting new ideas about what Proserv could pursue to grow its
business developing a number of new products, and services implementing new technology, based on our customers’ needs.
Leading the regional sales and services aftermarket team in proposing long term service contracts with Proserv’s clients in
Egypt (Bapetco, Rashpetco & Petrobel).
Promote a culture of continuous improvement, and lead by example to ensure company goals are achieved and exceeded.
Conducted several training courses as a Technical Instructor providing detailed illustration to Proserv Middle East client team
members (Sonatrach & ARAMCO) on supplied Well Head Control Panels including theoretical as well as on-site training.
Danway Electrical and Mechanical Engineering L.L.C.
Construction of Water Supply System for Fujairah Distribution Network (May 2012 – July 2013)
Position: Mechanical Design Engineer
Scope of work:
Prepared network Hydraulic Calculation Report Steady and Surge Hydraulic Analysis modules using AFT impulse software.
Prepared the reports for NPSH calculation, Friction Loss Calculation, Pipe Size Calculation, Piping material specification and Pipe
Wall Thickness Calculation, according to ASME B31.3 & ASME B31.4 using AFT Impulse.
Formulated detailed design report for the Cooling System of main Pump Motors as well as the VFDs including sizing and selection
of Circulation Pumps, Heat Exchangers and related system interconnecting Pipes.
Reviewed vendor documentation and drawing for the whole system valves, surge vessels, pipes and fittings.
Developed Technical data sheets, Material Technical Specification, for the mechanical related equipments.
Conducted technical and commercial comparison for the shortlisted vendors and further commercial negotiations.
Prepared the flooding system calculation report and selecting the respective Sump Pumps.
Prepared the design basis reports for the compressed air system including sizing and selection of Compressors & Surge Vessels.
Communicated effectively with clients to identify needs and evaluate alternative business solutions.
ACHIEVEMENTS
Built a robust network of suppliers and manufacturers sources with a focus on attentive cost control, quality management and
increased purchasing leverage to prioritize optimal efficiency.
Slashed payroll/benefits administration costs 30% reduction by simplifying the design and proper material selection, while
ensuring the continuation and enhancements of services.
Kharafi National (Water & Waste Water Operations)
Construction of Wathba Waste Water Treatment Plant (300,000 m3/day), UAE (May 2009 – April 2012)
Position: Mechanical Engineer

3. Nour Eldin Ahmed Mohamed Mobile: +971551075210
Senior Mechanical Engineer Email:noureldin.ahmed@hotmail.com
Scope of work:
Assisting in man-hours estimate for new project within the proposal phase.
Review the piping design documents (P&ID, Isometrics, GA’s, Supports Details, and MTO).
Review the piping activities and completion in accordance with schedule requirements.
Preparation of technical procedures and method of statement for the installation of mechanical equipments.
Prioritized scope activities to most efficiently meet project schedule requirements.
Prepare material take offs of field purchased piping material, equipment, structural, assist field procurement in inspection
and receipt of mechanical materials & order placement for any subsequent revisions.
Supervision of all pre-commissioning activities such as dry run, clean water test and all related equipments start up for the
entire water stream including main Pumping Station, Clarifiers, Aeration Tank, Filter Station, RAS & SAS Pumping Station.
ACHIEVEMENTS
Implemented processes that reduced the project engineering costs 40 to 60 Percent.
Created detailed 3D model that demonstrate Accessibility, Maintainability and Constructability consideration.
Construction of Polyethylene Expansion Project (LPK), Kuwait (Jun 2008 – Apr 2009)
Position: Mechanical Field Engineer
Scope of work:
Prepared the required Man-hour estimate for a specific working area in the project scope, compilation of equipment scope
activities including MTO’s, drawings, and project activity durations.
Assisted in supervising of all Equipments installation, erection, heavy lift & all Pre-Commissioning activities such as Hydro-Testing,
Chemical Cleaning, Water Flushing & Air Blowing.
Prepared work packages for construction activities and Method of Statements.
Reviewed the progress completion of the field activities in accordance with the schedule requirements.
Ensured all engineering inspections and tests are carried out and results are satisfactory.
Responsible for monitoring workmanship quality through Punch List preparation and associated rectification actions.
Construction of Ethylene Glycol-2 Plant, Kuwait: (Nov 2007 - Jun 2008)
Position: Graduate Mechanical Engineer (Technical Office)
Scope of work:
Reviewed specifications, procedures, inspection reports, delivery schedules, vendor manuals and technical data.
Interfaced with design on constructability issues and in the resolution of obstacles through discussion with the client.
Monitored the fabrication shop to insure the quality of Piping fabrication in accordance with the client standards.
Performed constructability reviews of engineering design, resolves issues with engineering and/or fabricator.
Assisted field Supervisors in inspection and receipt of materials & order replacement for any subsequent revisions.
Assisted in supervising the erection of the Steel Structures of the Pipes and Pipe Supports.
TRAINING COURSES
2005: A course in Operation and Maintenance of Thermal Power Station and Heat Recovery Boiler by EGPC.
2004: A course in Operation of Cooling Towers, Water Treatment units and Heat Exchangers by SIDPEC.
2003: A course in Operation and Maintenance of Hydraulic Equipments and Gas Compressors by SIDPEC.
LANGUAGE SKILLS
Fluent in Arabic and English (writing, reading and speaking)
GRADUATION PROJECT
Pipeline Design, Full SCADA System, Economical studying, Selection of optimum route and building a complete database for
existing system for Alexandria Petroleum Company. (Graduation project grade: 95% Distinction).
PERSONAL DATA
Address : P.O. Box 16922 Dubai - UAE
Date of Birth : 30
th
January 1985
Nationality : Egyptian
Marital Status : Married
Driving License : Valid (UAE & Egypt)
Visa Status : Resident Visa.