1. QA/QC Mechanical Engineer/ Supervisor
Nguyen Van Trang
Date of birth: 14.12.1985
Place of birth: Binh Hiep Commune - Binh Son District - Quang Ngai
Province – Viet Nam
Gender: Male
Marital status: Married
Address: Vinh Tan 4 Thermal Power Plant Project, Vinh Tan
Commune, Tuy Phong Distric, Binh Thuan Province, Viet Nam.
Local Mob. No.: 0975.181.039
E-mail Address: vtrang14@gmail.com
Application For the post of QA/QC - Mechanical Engineer/ Supervisor
Objective To work and seek technical challenging position as deemed suitable to my skills,
experiences as well as backgrounds to enhance myself for further growth of
professionalism.
Skills Auto CAD
Microsoft Offices
Education  Naval Architecture and Marine engineering at Nha Trang University.
 CSWIP 3.1 Welding Inspector Level 2, CSWIP Certificate No. 89278 TWI, Day of
expiry 20 June 2019.
 NDE - Magnetic Particle Testing (ASNT) Level 2 certificate.
 Greenbelt Incident & Injury Free Champion certificate (Safety certificate) of JMJ
Associates.
Total Experience  Eight (8) years of continuous experience as QA/QC Mechanical, Welding Inspector
and Piping Engineer for projects related to Marine, Refinery & Petrochemical,
Thermal Power Plant projects.
 Knowledge and practice on International codes and standards such as: AWS D1.1;
ANSI/ASME I,II,V,VIII &IX; ASME B31.1; B31.3, B16.5; API 510 and others related
requirements of every project.
From April 2016 to till date
Employer Doosan Heavy Industries Company Limited,
Vinh Tan 4 Thermal Power Plant Project, Vinh Tan Commune, Tuy Phong Distric, Binh
Thuan Province, Viet Nam.
Project Assignment Vinh Tan 4 Thermal Power Plant Project
Qualification QA/QC - Mechanical Engineer (Welding & Piping Inspector)

2. QA/QC Mechanical Engineer/ Supervisor
Major Responsibilities  Control Power piping in Boiler and BOP piping in Pipe Rack, Turbine house, Yard,
Water treatment, Waste water treatment, FGD, ESP, Condensate, Fuel Oil, Gas
Chlorination areas as per isometric drawing, P&ID drawing, project specifications,
procedures and code ASME31.1.
 Inspection and witnessing of daily construction activities as per ITP.
 Review, evaluate and monitor the daily fit up, welding visual reports and inspection
check list from different subcontractors Lilama Corporation, Lilam 10, Lilama 45.1,
Lilam 18.
 Coordination with third party inspector and client inspector of EVN.
 Responsible for daily inspection of pipe spools at shop, pipe erection at site as fit
up, dimensional, welding visual, line check, pressure test and final walk down as
per project procedure, specification, ASME 31.1.
 Issue punch lists, prepare hydro test packages and piping document.
 To check the consumables control that complied specification & method
statements.
 Material traceability, heat number verification as per specification and drawings.
Control NDT jobs as per drawing, code ASME, ASTM.
 Welder qualification test arrangements and witness as per ASME section IX for
piping.
 Control fit up, welding joints, NDT, PWHT, Hardness test status through welding
control log.
 Responsible, prepare daily inspection & QA/QC documents and submit to Owner .
 Welder control, subcontractor control.
From December 2014 to April 2016
Employer JGCS Consortium - South Korean Engineering & Construction Co., Ltd
Nghi Son economic Zone – Tinh Gia District - Thanh Hoa Province - Viet Nam
Project Assignment Nghi Son Refinery and Petro Chemical complex project
Appointment Piping Supervisor - Piping Construction Department
Summary of Duties  Supervised, plan, manpower control and set up daily task to the Company’s
subsidiaries Lilama for proper work execution within the project’s contractual
scope of works.
 Coordinate with the Project Management Team for the priority items to be
fabricated, erected in line with the construction activities.
 Responsible for reviewing generated construction drawings for piping isometrics,
diagrams, material checking, welding activities, piping welding quality control,
control piping welding status through welding log sheet, check daily reports, follow
specifications, job instructions, material deliveries and tools applicable to the
particular discipline and area of work.
 Ensure that piping construction subcontractors’ supervision and manpower are
instructed in and comply with all aspects with health, safety, environment and
security (HSSE) policy, site regulations, permit to work procedures and client
requirements.
 Involved in direct and indirect work force at site construction including piping
spool fabrication, installation, erection, line checking, punch list, hydrostatic
testing, pneumatic on pipe racks as well as around equipment.
 Ensure safety of work, the piping fabrication, piping welding, erection and
installation activities are as per project specifications, applicable codes and
standards.
 Daily tool box meeting leader, weekly meeting with subcontractors.

3. QA/QC Mechanical Engineer/ Supervisor
From December 2013 to December 2014
Employer Daelim Heavy Industrial Co., Ltd
O Mon Thermal Power Plant Unit 2 - Phuoc Thoi Ward - O mon District - Can Tho city
- Viet Nam
Project Assignment O Mon Thermal Power Plant Unit 2 Project
Appointment QA/QC - Mechanical Engineer (Welding & Piping Inspector)
Summary of Duties  Piping activities control in Boiler, Power House, Pipe Rack and Yard.
 To inspect and maintain all mechanical QA/QC activities of subcontractor
(Lilama45.1, KTID) such as material control, piping fit up, welding inspection,
piping installation, NDE (none destructive examination), review RT film, PWHT
(post weld heat treatment), hydrostatic test, pneumatic test, final walk down, issue
punch list in accordance with project specifications, procedures, codes, standards
(ASME, ASTM), familiar with isometric drawing, diagram drawing, welder
qualification test inspection.
 Has the full authority to report all results of inspection to all areas of operations
that do not meet requirements specified in approved quality plans, procedures and
customers specifications.
 Welder control, NDT defect ratio control, control welding joints status through
welding log sheet, welding summary as well as document control.
 Weekly meeting with subcontractor, daily report to manager, daily piping welding,
installation inspection at shop and site with EVN team. Welder control,
Subcontractor control.
 Prepare package document and submit to Owner EVN.
From May 2012 to Dec 2013
Employer Sai Gon Offshore Fabrication & Engineering Co., Ltd (Sai Gon Offshore
Co., Ltd)
Rach Dua Ward - Vung Tau City - Ba Ria Vung Tau Province - Viet Nam
Appointment QA/QC - Machinery & Piping Inspector
Summary of Duties  Providing a quality control function during the execution of Company’s contract,
project works related in static and rotating equipment, piping system installation,
piping hydro test, pipe flushing, chemical cleaning inspection, welding control on
ship within standard, international code, vessel rule, specification, within
qualification training and experience limitations.
 Prepare ITP, drawing, record, report, document and submit to Owner.
 Approve and review document, records and certificates of machinery, piping
system.
 The role and responsible for document controlling, inspection of material in
coming, machineries & equipment installation such as Pump, Thruster, Shaft
alignment, Fan, Generator, Air Compressor, Boiler, Chock Fast pouring and others
related equipment. Piping activities such as shop fabrication, field installation,
welding inspection, welder qualification test, hydrostatic test, pneumatic testing,
flushing, chemical cleaning, pre-commissioning, testing & commissioning for all
machineries and piping system onboard.
 Arrange weekly meeting with production team, daily report to manager, clear
punch list and NCR with Owner. Ensure piping, machineries & equipment
installation and quality are as per project specification, applicable codes, standards,
drawing and procedures.
 Project Assignment:
 TPP piping offshore project

4. QA/QC Mechanical Engineer/ Supervisor
 Sub Sea Construction And Pipe Lay Vessel project
 Elevated Lifeboat With Tubular Legs 102,5m project
From March 2009 to May 2012
Employer Hyundai-Vinashin Shipyard Co., Ltd.
Ninh Phuoc Commune - Ninh Hoa District - Khanh Hoa Province - Viet Nam
Appointment QA/QC - Machinery, Piping & Welding Inspector
Summary of Duties  Providing a quality control function during the execution of Company’s contract,
project works related in static and rotating equipment, piping system installation,
piping hydro test, pipe flushing, chemical cleaning inspection, welding control on
ship within Huyndai standard, international code, vessel rule, specification,
qualification training and experience limitations.
 Ensure quality of machineries such as Pump, Thruster, Shaft alignment, Fan,
Generator, Air Compressor, Boiler, Chock Fast pouring and others related
equipment. Piping installation, welding inspection, electric cable installation
inspection, pre-commissioning, commissioning on vessel and satisfied
specification, procedure, standards, codes and drawing.
 Prepare ITP, document and submit to Owner, Liaise and corporate with Ship
Owner, social classification during inspection items.
 Going sea trial, all systems and machineries operation onboard to be smoothly
operation. Has the delegated authority to reject items that having been inspected
are found to be out of compliance with the standards and specifications applied to a
particular scope of work. Has authority to approve document and endorse records
and certificates that attest to the acceptability of inspected items.
 Project Assignment:
 Vessel No. S027, S028, S029 – 37.000DWT BULK CARRIERS (Client:
NORDEN)
 Vessel No. S057, S058 – 56.000DWT BULK CARRIERS (Clients: HANJIN,
GENDEN)
 Vessel No. S061 – 82.000DWT BULK CARRIERS (Client: SAINT MICHAEL)