Qc

MD ARIF UZAIR
Shek Alam Chak Jehanabad, Bihar-804408
Contact: , +96890934948 E-mail: arifuzair2@gmail.com
QUALITY CONTROL/ INSPECTION ENGINEER
Offering over 10 years of experience across the industry
PROFILE:PROFILE:
 Dedicated, resourceful and innovative Mechanical Engineer, offering experience of 10 years across inspection of
welding, Piping and quality control operations. Currently working with GALFAR ENGINEERING OMAN as QC
Engineer (Piping/Welding).
 QA/QC-Welding Inspector (Mechanical & Piping) is responsible for handling Quality activities pertaining to
fabrication, installation and commissioning through to handover.
 Experienced in implementing QA/QC systems, conducting stage wide welding quality checks, carrying out Welder
Qualification Tests, Procedure Qualification Records, preparing welding diagram and Welding Procedure
Specifications.
 Extensive experience in carrying out stage by stage inspections and handling complete in-process quality control and
implanting measures for enhancing quality levels.
 Core competencies in Material Inspection, NDT Activities and Pressure Test, Pipeline. Familiar with Standards,
Codes and Specifications ASME section I, II, V, VIII and IX, ASTM & BS, BSEN Standards, NDT, ISO & MSS
Standards.
 Recognized as a hands-on, proactive professional who can rapidly identify problems, formulate tactical plans, initiate
change and implement effective programs in challenging and diverse environments.
PROFESSIONAL EXPERIENCEPROFESSIONAL EXPERIENCE
GALFAR ENGINEERING & CONT.COMPANY S.A.O.G (OMAN) JAN’2014 Til
Date
PROJECT: YIBAL KHUF CPF
PROJECT: YIBAL ODC GAS PIPE LINE PROJECT
QA/QC ENGINEER WELDING PIPING
 Good knowledge in International Codes, Standards and Specifications on materials, welding,
 Review of QA/QC documentation related to project vendor / shop works, provided by CONTRACTOR
(Material certificates, certificates of conformity to standards, NDT reports, etc.).
 Responsible for all fabrication, installation and testing of piping system at oil well head areas.
 Conducting daily progress review meeting with all supervisors and Foreman.
 Extract MTO and make availability for material during Construction.
 To do Final hook up and line check as per ISOMETRIC drawing released for construction.
 Scheduling, Conducting & follow up step by step activities after installation like Hydro test, pickling,
purging and drying.
 Verify the line by self before request for hydro test as per Drawing and standard.
 Preparation of package as per P & ID and attached all related hydro test documents.
 Hydro test package send to PMC for final review before hydro test before 24 hours prior to RFI.
 Witness holiday test, vacuum test and implementation of test packages.
 Promote quality and safety consciousness among workers.
 Responsible for the complete piping activities as required by the existing company standard codes.
 To make technical quire if the Concern is not as per Drawing or as per agreed technical specs.
 Making isometric drawing for small bore pipes as required.
 Investigate the discrepancies of pipes found during inspection, analyze the defect if beyond tolerance limits and
make the necessary corrective measures.

SINOPEC ENGINEERING (ABU DHABI)
PROJECT: RUWAIS REFINERY EXPANSION (TAKREER-ADNOC). May’2012-
Oct2013
QA/QC WELDING INSPECTOR
Scope of the project: 1/2” to 48” carbon steel, stainless steel, Alloy steel piping with GTAW/SMAW processes’.
 Preparation and maintenance of daily inspection reports, compilation of final inspection, Welding and
NDT records. Carry out material receiving inspections, welding inspections as per Client Standards.
 Complying with the Approved WPS and the ITPS during fabrication and erection of piping.
 Witnessed and reviewed WPS, PQR, Welder Qualifications As per Client Specified Codes & Reviewed subcontractors
procures according to Specifications and ensure compliance
 Carry out Line punching during the Test pack internal review and assistance for the reports preparation.
 Entrusted with the task of preparation of internal punch list and clearance inspection during fabrication.
 Check and prepare orifice flange inspection and pipe flange alignment report.
 Perform the inspection and review wrapping/coating, holiday test, and QC reports.
 Preparation and maintenance of daily inspection reports, compilation of final inspection records, conduct
welding procedures qualification, welding operator qualification, implementation of client project
specification and relevant industry codes.
 Core member in the preparation of the hydro test packs and testing of CS and SS pipelines.
 Making daily inspections based on the work procedures and issuing punch lists and non conformance to
the construction department.
 Ensured compliance to quality standards and control all related documents, updating various welding processes like
SMAW, MIG, MAG, SAW, FCAW

GS ENGINEERING & CONSTRUCTION. (KUWAIT) Dec’11-April’12
 QA/QC WELDING INSPECTOR Core competencies in QA/QC, Inspection, Welding, Piping, Pipeline laying, valve
testing, Different type of Static Equipment, Different type of ferrous and Non-ferrous Material inspection, Mechanical
testing, NDT activities, Pressure testing etc..
 Managing overall activities of QA / QC including NDT, DT, Welding functions. Involved in handling Customers visit
& audits and its documentation for improvement on customers comments.
 Acquired expertise in welding Inspection on GTAW, SMAW, FCAW, SAW, GMAW and Weld Overlay.
 Reviewing hydro-test packages and Tie-in packages.
 Coordinating and witnessing hydro tests of Cross country Pipe Line and piping.
 Inspection of mechanical items and systems such as pipes, piping, fittings, valves, structural steel, and
fasteners, … etc. ,
MOODY INTERNATIONAL INDIA PRIVATE LIMITED (DELHI) Nov’10-Dec 11
MECHANICAL INSPECTION ENGINEER
 Holds credential in conducting Stage Inspection including Final inspection, Receiving Inspection, Outward
inspection.
 Managing overall activities of QA / QC including NDT, DT, Welding functions. Involved in handling Customers visit
& audits and its documentation for improvement on customers comments.
 Maintaining quality standards for incoming materials, ensuring stringent adherence to quality standards, norms &
practices, identifying gaps and taking corrective action
 Executing cost saving techniques/ measures and modifications to achieve substantial reduction in O&M expenditures
and work within the budget.
 Assessment of the performance of the vendors based on various criterions such as percentage for rejections, quality
improvement rate etc.
 Perform internal audits, equipment calibration and related quality activities as required.
 Perform assessment of inspection systems and identify areas of improvement.

 Accountable for Project Coordination, Inspection co ordination and back up office support & Management support
 Carry out Line punching during the Test pack internal review and assistance for the reports preparation.
 Entrusted with the task of preparation of internal punch list and clearance inspection during fabrication.
 Check and prepare orifice flange inspection and pipe flange alignment report.
 Perform the inspection and review wrapping/coating, holiday test, and QC reports.
 Conduct Review and Interpretation of RT films as per ASME V. Check the fit up stage prior and confirm that root
gap, Off set, bevel angle are within acceptable limit.
 Maintaining all inspection report and related documents in QA/QC department.
 Preparing formats for all new jobs, Weld maps & its stages as per drawing requirement, etc.
AYOKI FABRICON PRIVATE LIMITED (JAMNAGAR) Oct’09-Nov’10
Inspector Welding/Piping
 Carried out inspection of incoming materials bought out materials and finished components.
 Involved in inspection in Pipeline, Trunk Line, Manifold, Pumping Station, Block Valve station, Storage Tank and Tie-
in.
 Conducted Structural Steel Fabrication & erection and Pile Drive Installation.
 Well versed in Welders qualification and procedure qualification and Welding consumable control.
 Acquired expertise in welding Inspection on GTAW, SMAW, FCAW, SAW, GMAW and Weld Overlay.
 Sound knowledge of Fit-up, Dimensional, Orientation, Preheating, Post Heating and Inter-pass temperature control.
 Undertook tasks pertaining to Visual Inspection, PWHT, HT & NDT requirements.
 Adequately skilled in Plastic Pipes, FRP, HDPE, PVC, welding, Spigot and bonding inspection.
 Facilitated Hydro/pneumatic/leak test for piping, tank and valves.
 Handled NDT, PWHT, HT, PMI, FN Reports, controlled copy of drawings, specifications, vendor drawings, data
sheets and data books.
 Deputed to handle Material Test Report with conferment products and Physical Verification.
 Conducted Inspection Test Plan, Quality Control Plan and Generic Records.
 Improved the existing systems on ISO/Calibration, etc. as well as implementing Quality Standards for old and new
components.
AVINASH EM PROJECT PRIVATE LIMITED (INDORE) March’8- Oct’09
QA/QC Engineer
 Monitored production, kept control over activities and analyzed processes for stabilization thereby ensuring smooth
operations.
 Interacted & coordinated with Clients for Quality parameters.
 Reviewed all subcontractors Procedures, ITP’s and Inspection report formats according to Client specification.
 Witnessed and reviewed WPS, PQR, Welder Qualifications As per Client Specified Codes & Reviewed subcontractors
procures according to Specifications and ensure compliance
 Maintained quality standards for incoming materials, ensuring stringent adherence to quality standards, norms &
practices, identifying gaps and taking corrective action
 Performed assessment of inspection systems and identify areas of improvement. Responsible for preparation of the
necessary documentation.
 Responsible for checking and maintenance of all related documents for further analysis and remedial action.
 Ensured compliance to quality standards and control all related documents, updating various welding processes like
SMAW, MIG, MAG, SAW, FCAW
 Ensured 100% Quality check during in-coming, in-process and pre delivery stages
 Facilitated cost reduction through continual improvement and implementing various processes
 Providing approval of internal WPS / PQR / WPQ / Validation of Welder Certificates

EDUCATIONAL & PROFESSIONAL CREDENTIALSEDUCATIONAL & PROFESSIONAL CREDENTIALS
B.TECH in Mechanical Engineering, 2008
JNTU HYDERABAD ANDHARA PRADESH
Certifications:
TWI CSWIP 3.1(Cert No-57227) 27 July 2011
ASNT Level –II
KNOWLEDGE OF INTERNATIONAL CODE & STANDARDS:
 Familiar with ASME SEC-II, SEC-V, SEC-VIII & SEC-IX.
 Familiar with ASME B31.1, B31.3, B31.4, B31.8 & B31.9
 Familiar with ASME B16.5, B16.47, B16.9, B16.11, B36.10, B16.10, B16.34, B16.20,
B16.21
 Familiar with ASTM A370, ASTM A262, ASTM A388, ASTM A105/ A106/
A234/ A516/ A350/ A333/ A420/ A182/ A335/ A312/ A387/ A240/ A403/
A216 / A179/ A351/ A790, ASTM B466 & CRAs material/Alloy 825( ASTM
B423/B564/B366)
 Familiar with API-5L, API-1104, API-598, API 6D, API-650, API-653, API-510 &
API-570.
Date of Birth: 05th
February 1982
MD ARIF UZAIR
Shek Alam Chak Jehanabad, Bihar-804408
Contact: +96890934948 E-mail: arifuzair2@gmail.com
<Date>

<Name> MOHAMMAD ARIF UZAIR
<Designation> QC ENGINEER
<Company Name> <Address GALFAR ENGINEERING
Sub: QC ENGINEER Piping/Welding
Against your expressed requirement of an appropriately qualified candidate for the subject position, I avail this occasion
to endorse my resume for perusal and consideration.
Performance-driven, dynamic and talented professional with over 10 years of experience as a QA/QC/ inspection
/Welding engineer across wide range of industries. I have acquired extensive expertise in conducting various types of
tests and inspection procedures across wide range of industrial /pipeline projects. As certified welding inspector I have
demonstrated competencies in conducting weld visual inspection, performing welding Procedure & certifying Welder
Qualification.
Currently working with GALFAR ENGINEERING as QC Engineer (Piping/Welding). I have experience in
implementing QA/QC systems, conducting stage wide welding quality checks, carrying out Welder Qualification Tests,
Procedure Qualification Records, preparing welding diagram and Welding Procedure Specifications.
With sound technical education including B.TECH in Mechanical Engineering from JNTU Hyderabad Andhra Pradesh, I
seek professional realignment at senior level in the domains of QA/QC/Inspection/Testing/Welding Engineering. Self
driven and motivated I am capable of working effectively and independently on multiple priorities. I have strong
credentials in planning goals and estimating workloads to establish completion dates and proven ability to perform
complicated tasks to meet the deadlines.
My attached resume shall familiarize you with details and I would be obliged if an occasion is granted to me for a
personal / telephonic interview to provide you further inputs on my abilities to suit the subject position.
Thanking you
MOHAMMAD ARIF UZAIR

Qc

More Related Content

What's hot

Similar to Qc

Recently uploaded

Qc