1. Page 1 / 4
Broosto George
Mechanical Engineer/Site Engineer
Email:broosto12@gmail.com
Mobile: +971-562771627/+971-528550253 (UAE)
+919946222883(India)
Profile
An ambitious, optimistic professional with proven abilities in managing a wide gamut of activities with core
strengths in Mechanical, Piping and QC Engineering. Exemplary leadership skills with the ability to drive
organizational initiatives through efficient team work. Able to identify areas of strength & weakness and lay
down Organization systems & process within the prescribed timeline that optimizes productivity. An excellent
relationship management skill articulate and thrives on a challenge, works effectively with all levels.
Career summary
Bachelor’s Degree in Mechanical Engineering having 4 year experience in UAE (Abu Dhabi).
Career path
Mechanical / Site Engineer
TARGET ENGINEERING CONSTRUCTION CO. L.L.C (Abu Dhabi, UAE) - September 2012 – Till Date
Current Project:-
CPP –Causeway pipe line project-Offshore
Company: ADOC,
Career Responsibilities
 Review that all project purchase orders and delivery requirements
 Working with vendors/ suppliers to minimize delays with drawings, deliveries, sub-suppliers delays.
 Monitoring timely execution of delivery schedules for the project purchase orders
 Daily Contact with vendors to follow up on progress of project orders (Equipment’s and Materials)
 Daily expediting report update to project team
 Working with vendors/suppliers to minimize delays with drawings, deliveries, sub-suppliers delays,
 Report to Engineering team if any problems identified and propose recovery solutions
 Analyze procurement documents to identify items to be tracked
 Coordinate on-site inspection of vendor’s facilities and material inspection as required by project orders
 Expedite required documentation after the receipt of goods to complete on-time shipment of the order
 Due diligence to expedite vendor documents to prioritize on-time shipment of orders
 Monitoring piping fabrication and erection as per applicable codes, standards, and project specification
 Various types of valves and equipment’s maintenance and replacement
 Conducting inspection in site with client
 Arranging manpower, equipment handling and planning for mechanical activities prior to the project.
 Planning, monitoring and coordinating daily work for timely completion of the shut down without
compromising the quality.
 Identify the test loop as per Hydro/Pneumatic Test Pack.

2. Page 2 / 4
 MRF preparation and procurement follow up.
 Preparing camp execution plan, materials and caravans for causeway camp and execution .
 Barge arrangements and project materials shifting to offshore and coordination with marine department and
port authority.
 Arranging required material for Hydro/Pneumatic testing as per project specification.
 Arranging proper barricading and safety requirements for testing areas as per calculation.
 Organize the work systematically and distribute the work load to my subordinates.
 Fabrication of structural steel offshore platforms
 Erection of cross beam on top of offshore piles and Walkways, ladders and fenders
 Ensure all materials as per MTC (material test certificate) &quality is check as per requirement.
 Schedule and assign daily/weekly work for several crews and to make sure that all safety standards are
maintained
 Resolve any schedule delays with the project manager and propose methods for recovery to maintain the
overall project base line schedule
 Tracking the cost of the project by the cost of consumables, manpower, and equipment after completion of
the works.
 Fabrication and Erection of roof structure and roof cladding for transformer buildings.
 To assist Construction Manager in tracking of equipment and material cost, supervision and construction,
subcontract cost and cost of overtime.
 Co-ordination with client and sub-contractor through various phase of the project, reviewing the progress of
project.
 Responsible for inventory control, Generating reports of used &balance quantity in stores/warehouse
 Co-ordination with painting subcontractor ,fire proofing and scaffolding subcontractor
 Co-coordinating with planning department for invoicing, cost controlling and project schedule planning.
Projects Handled
Project-1:- EPC works for Paraffinic Naphtha tank replacement-Offshore PNT (Das Island-Abu
Dhabi)
Company: ADGAS
Contractor: TARGET MECHANICAL OIL& GAS
Scope of PNT Project
The scope of works include to replace the existing ADGAS paraffinic naphtha tanks with new storage tanks at
a new location within the ADMA storage facility on Das Island, U.A.E. The existing Plant consists of two
identical trains with associated utilities commissioned in 1977 and a third train with associated utilities
commissioned in 1994; Plant products are LNG, LPG, Paraffinic Naphtha and molten Sulphur. These are
exported through separate jetties; one for LNG, LPG and Paraffinic Naphtha and the other one for Sulphur. The
existing paraffinic naphtha tanks have reached their design life and are to be replaced with larger capacity,
double skin floating roof tanks at a new location. The existing tanks will remain in operation, and will be
demolished at a later date.
Project-2:-SMP-4 - Shut Down project Ruwaise –Abu Dhabi
Client: GASCO
Scope of SMP-4
The project involves Construction of mechanical works (Structure, Mechanical and Piping works), Pre-
commissioning and commissioning assistance works, Provision, Operation and Maintenance of All temporary
Site Facilities, mechanical completion and pre-commissioning of the plant
Project -3:- NGL-4 Ruwaise –Abu Dhabi
Company: GASCO
Scope of NGL-4 Project
The project scope of works includes engineering, design, procurement, supply, install, construction,
mechanical completion, testing and commissioning for the sea water system. It consists of three pipes of 108”
(2.75m diameter) about 2 kms into sea.

3. Page 3 / 4
Works include civil earthworks, foundations, road crossings, marine dredging, trench excavation, RCC works
for intake basin and pump chambers, steel structure works, drain pumps, pipe spools, bar screens, rotating
screens, pipe supports, and associated electrical and instrumentation works - cathodic protection works, and
future corrosion monitoring system.
Project:-4-SGD-A Shah Gas Development Project Package-2&3(Non-Process Building).
Client: Al HOSN GAS-Shah-Abudhabi
Contractor: SAIPE
Scope of SGD –A project
Works consist of construction of 12 buildings (Instrument equipment Shelter & Substations) total area of
Building is 13,363 M2 and total area of Transformer Bay Construction is 5130 M2. Building works shall
consist of Architectural & Structural works for buildings (Transformer Bays, External Cylinder shed and
Concrete areas for placing HVAC Equipment) Works include Plumbing and Drainage works, Furniture,
Functional and Safety Signals, Civil works assistance to system installations. Building services includes
Electrical Services, Telecommunication, Fire Protection, Fire and Gas Detection System and Heating,
Ventilation and Air Conditioning system etc.
Project-5:- OAG-1 shut down Das Island, Abu Dhabi
Company: Adgas
Contractor: Technip
Scope of OAG Shut Down:
Project Scope includes Above Ground Piping Work Prefabrication & Erection, Painting Works at Fabrication
Shop, Transportation to Site, Assistance to Thermal Spray Coating , & Epoxy coating, Nozzles of ASME
Vessels Modifications, replacement of Equipment’s, Insulation, Electrical Demolition, Installation Works &
Instrumentation.
Job Profile and Responsibilities as Mechanical Engineer in Target Engineering Fabrication
Workshop
 Project Management and Team Management in infrastructure, gas/oil and petro-chemical projects.
 Manage all operational responsibilities of fabrication shop to include scheduling, job cost tracking,
inventory, staffing, shop expense management, and personnel management,
 Handling structural steel, piping and pressure vessel fabrication works in fabrication workshop
 Manage for developing the fabrication detailing plan for structural steel, piping and pressure vessel
fabrication
 Manage fabrication quality control in the Structural Steel & Pipe fabrication environment
Monitor and control expenses related to projects and ensure company's forecasts and budgets are met
for these expenses.
 Provide in-house support to the project management and engineering groups, and managing
subcontractor relationships
 Knowledge of different Structural Steel, Piping and pressure vessel manufacturing standards, Grades
and its application in various industries
Education
 Bachelor’s Degree in Mechanical Engineering from Vinayaka Mission University, Tamil Nadu
 Higher Secondary Education from Higher Secondary Board Of Examination-Kerala
 Secondary Education from Kerala State Secondary Education - Kerala.
Technical Certifications
1. ASNT Level II in
Radiographic Testing Method (RT)

4. Page 4 / 4
Penetrant Testing Method (PT)
Ultrasonic Testing Method (UT)
Magnetic Particle Testing Method (MPT)
2. CSWIP 3.1 (QC)
CSWIP Certificate no: 65414
Computer knowledge
MS office tools
Auto cad, Pro-e
Professional Training Attended
 Passed HSE (Health, Safety & Environment) training in permit system from Emal.
 H2S/breathing apparatus, Sea Survival and Helicopter under water escape train attended from GTSC
 Course completed on Placement training and Language Skills conducted by HP (Hewlett-Packar
Personal details
Nationality : Indian
Date of Birth : 28-12-1989
Permanent Address : Thanninilkumpathalil, Oottupara p o
Cast : Cristian
Marital Status : Single
Languages Known : English, Hindi, Malayalam & Tamil
Passport details : J9901587
UAE DRIVING LICENSE NO.: 2351980
Declaration
I assured that the above furnished details are true to the best of my knowledge
Broosto George