1. TAHIR MAHMOOD
Tel: +971502580804
tahirqci66@yahoo.com
EducationalQualification:-
Bachelor degree in Mechanical Technology.
Diploma of Associate Engineer in Mechanical.
Diploma in Oil and Gas technology.
Certification in Computer Science. .
Certification in AUTO CAD.
TechnicalQualification:-
Senior Certified welding inspector.(Certificate no:-0812246 1).
Certified welding Inspector . (Certificate no:- 16040068 ).
Certified painting inspector B-GAs . (Certificate no:-BG-631086 ).
ASNT NDT Level II –MT-PT-UT-VT-RT.
Nebosh. International General Certificate Occupational Health and Safety. Result awaiting- Student No: 00268771.
TRAININGS:-
ISO 9001:2008 –ISO 14001:2004& OHSAS18001:2007 Internal auditor training.
Leadership course. Quality management system. UT thickness gauging. Positive
material identification. Fire fighting, first aid, Accident prevention, Job risk assessment,
Emergency response, H2S.
EXPERIENCE FIELDS:-
Total-12 Years’ experience including 10 years in UAE in the field of Mechanical, Piping, Structural
and Welding Inspection in Oil and Gas sector, LNG plants, Refinery, FPSO, FSRU, FSO conversion ships.
EXPERIENCE PREVIEW:-
 Inspection of material, Fabrication, Welding, Monitoring NDE activities, Assessment of
Inspection reports. Responsible for developing and reviewing the quality Procedures.
 Ensuring compliance with QA standards and procedures, Issuing Final Certificates of
Compliance, Monitoring PWHT, Hardness Testing & Various NDT activities and Reviewing
Related Reports as a QC.
 Test Pack Review and Release for Pressure Tests.
 Experienced in Reviewing Plot Plans, P & IDs , Piping Isometrics & G.A Diagrams.
 Proficient in Inspection, Evaluation and Acceptance of Welds of piping with reference to
International Codes & Project specifications of Plant Piping.
 Managing sites of executing Painting works with care Productive and Progressive way by
maintaining Quality as per the Project specifications and Satisfying the Client all throughout
the Project.
 Preparing and handing over various Documents and Dossiers.

2. Responsibilities: -
 Responsible for monitoring and surveillance of quality system during execution of project.
 Visiting the construction site daily to check whether all works, materials, equipment, are in
accordance with QA/QC program, Project drawing & specification. When defective
materials, equipment, or workmanship are found, immediate action to be taken to correct
them, & to report the corrective action to the Site Supervisor.
 Focal point to maintaining Quality standards on a project site.
 Responsible to conduct QC tool box talk on site before starting any activity to fulfill quality
requirements and standards.
 Explanation and implementation of different materials data sheet to workers as per
manufacturer recommendations.
 Co-ordinates with site staff to ensure that all required testing has been performed and those
acceptable results have been achieved.
 Advise site staff a deficiency detected during “in-progress” Inspection and assists and
advises on any requirements and remedial actions. Follows up to ensure that all necessary
action has been completed prior to release as final acceptance.
 To conduct all required tests in accordance with contract documents and to prepare fill in &
sign all reports & forms as necessary for the compliance with Contract Quality Standards.
 Responsible for managing Inspection and Testing activates as per approved ITPs.
 Responsible for implementation of approved Project Quality Plan at project site.
 Responsible for developing and reviewing the quality documents.
 Responsible for keeping up to date measuring equipment calibration list.
 Responsible managing all type of inspections and also coordinate with third parties for
inspection/testing if required.
 Responsible for arranging site quality meetings with coordination of Project Manager.
Roles and Activities:-
 Responsibility includes review of project specification, drawing,welding and NDT
Procedures, and ITP.
 Witnessing of welding procedure qualification, welding operator and welder
qualification test and destructive testing of specimens.
 Material inspection, material test certificate review against purchase order, requisition
and project specification requirements.
 Monitor and maintain control records for welding consumable storage.
 Welder qualification and continuous assessment of their performance
 To check the fit up stage prior and confirm that root gap, off set, bevel angle are within
acceptable limit.
 Verify that the base materials and consumable welding materials conform to the
specifications and that the welding consumables used are as specified for each base
material or combination of base materials.
 Regularly checking welding parameters and essential/non essential variables.
 Checking the availability and suitability of the filler metal and of preheating, welding
and control equipment.

3.  Monitoring the welding operations specifically the suitability of protection and
precautionary measures adopted by the welder both for the preservation of electrodes
and for facing adverse atmospheric conditions.
 Ensuring all the personnel employed and operating in the welding activities are duly
skilled and qualified in accordance with the applicable specifications, codes .
 Preparation of weld map and maintaining the weld record.
 To select the joint for the NDT as per the welder coverage and line class percentage.
 Co- ordinate with sub contractor for NDT activities like radiographic testing, magnet
particle testing, Ultrasonic testing and penetrant testing.
 To do the penetrant testing as per the approval procedure is acceptable limit or not.
 Preparation of RT selection list for the Daily Radiography works.
 To witness magnetic particle testing of fillet joints and check defects.
 To witness preheating process and verify the chart.
 Maintaining of all inspection report and related documents in QA/ QC department
coordinating with Main contractor, third party and client.
 Issue NCR for violations found during inspection. . Review the test packages.
 To study the P&ID and other circuit diagrams in the test packMonitoring the
calibration of test instruments and equipments.
 To check and prepare orifice flange inspection and pipe flange alignment report.
 Preparation of punch list and clearance to next stage like Erection and painting.
 To Carry out Line punching during the Test pack review and the reports preparation.
 Review and approval of Test Packs and Mechanical Completion.
 Witness of Hydro tests and Pneumatic tests of Piping. Inspection of TIE – IN joints.
 To carry out Reinstatement of piping and report preparation.
 Preparing and handing over various Documents and Dossiers
 Conduct all worker activities in the safe and environmental policies and procedure
ExperienceProfile:-
 Employer : Al Hassan Engineering Co. Abu Dhabi LLC.
 Project : EPC for Rumaitha/Shanayel facilities Phase 111.Project No.44010
 Client : ADCO and GS E &C.
 Duration : 03 July 2016 – present
 Designation : QA/QC Engineer.
Global Process System Mafraq Abu Dhabi:-
Fabrication of piping ,skids and pressure vessel in Global process system workshop.
PROJECTS:- ADMA- DAS facility upgrading project. Abu Dhabi.
SHELL- BAPETCO. Badar Petroleum Company. Egypt.
SEPLAT- Oben Gas development project. Nigeria.
WEATHER FORD- Zubair oilfield development project. ENI. Iraq.
TAKREER-Samsung.Carbon black and delayed coker project. Abu Dhabi.
Duration : 22 April 2012 to 03 July 2016.
Designation : QA/QC Engineer.

4. Oil and Gas Construction Company. Abu Dhabi.
Project : ADCO-ASAB Full field development project. GASCO (PETROFAC-04 Th NGL.th NGL Project.
Client : Petrofac, Adco. Gasco.
Period : 17 Nov 2010 to 21 April 2012.
Designation : QC Inspector.
Dry docks world Dubai. UAE-Dubai.
Project : Ship repair, New ship building. FPSO.FSO.
Client : TK-Saipem-Chevron-SBM-NDC.
Period : 27 Nov-2006 To 01 Nov-2010.
Designation : QC Inspector.
PersonalDetails:-
 Date of Birth : 01 Oct 1980.
 Sex / Marital Status : Male / Married.
 Languages Known : English, Urdu and Hindi .
 UAE driving license : 2026082
 Nationality : Pakistani
Pass port Details:
Pass Port No : HQ0156152
Date of Expiry : 08-July-2018
PERMANANT ADDRESS: - Tahir Mahmood S/O Muhammad yasin. (EST) Tehsil kot addu.Dist
Muzaffar garh.Street No: 04.Muhalla Norani Abad. Chowk Sarwar Shaheed.Punjab Pakistan.
Contact No=+92-3330140786 + 92-3023743731 + 92-662211018.+971526272906.
Email: tahirqci66@yahoo.com Skype Id= tahir.mehmood137. Contact in UAE.050-2580804.
Declaration:
I hereby declare that all the information given above are true and correct with the best of my
knowledge and I bear the responsibility of the above-mentioned particulars.
Tahir Mahmood