SlideShare a Scribd company logo
1 of 6
CURRICULAM VITAE
Name : Mohsin Iqubal
Position Applied : HVAC QC INSPECTOR / WELDING INSPECTOR
Mobile : +966-515098202/+91-507246083
Email: connect2mohsin85@gmail.com
CAREER OBJECTIVE
Seeking assignments in the domain of Mechanical Engineering to obtain a responsible and
challenging position in an organization where I could leverage my background of technical study to
contribute to the Organizational growth and development.
WORK SUMMARY
A Mechanical Engineer having over 6 years of independent rich work experience in HVAC
(Heating Ventilation Air-conditioning) & Welding in large commercial and Industrial Projects in
India and Saudi Arabia.
Knowledge of major industry Codes and Standards like ASHRAE, SMACNA, NFPA,
UMC,ARAMCO,SADARA, ASME Sec IX,V,II,B31.3 etc.
EDUCATIONAL QUALIFICATION
First class Graduate Mechanical Engineer from MACET, Patna in 2010.
ADDITIONAL PROFESSIONAL QUALIFICATION
CSWIP 3.1 WELDING INSPECTOR.( Certificate No-97323)
ASNT LEVEL II,(PT ,UT ,MT, RT, VT).
HVAC (Heating ventilation air conditioning) Designing and draughting.
PROFESSIONAL WORK EXPERIENCE
DAELIM SAUDI ARABIA LTD.
Client :SADARA ( Saudi Aramco and Dow)
Project : Sadara Isocynates Project
Position : HVAC QC INSPECTOR
Period : May 2014 to till date.
JOB PROFILE
• Reviewed quality related documents, i.e. approved project procedures, applicable drawings,
vendors, manual and instructions, technical specifications and standard codes such as
SMACNA,ASHRAE,UMC for inspect ability and acceptability.
• Understand clearly HVAC system drawing of the project.
• Checked and understand the HVAC equipment schedule plan, to know the equipment specification
and identification of location ,where to be install.
• During the receiving inspection RFI must be checked the documents like approved P.O, Delivery
note, certificate from the vendor of quality test, vendor approval and carefully check the equipment
from any damage during the transport delivery or factory damage.
• Air handling Unit (AHU)
AHU receiving inspection.
Handling, storage and preservation inspection (weekly inspection).
Essential operating facilities HVAC requirements inspection.
Pressurized building HVAC requirements inspection.
Communication facilities HVAC requirements inspection.
Battery room HVAC requirements inspection.
• Packaged Air conditioning unit (PACU) system
PACU receiving inspection
Handling, storage and preservation inspection (weekly inspection)
drain lay-out inspection.
• Air Cool Condensing Unit(ACCU)
ACCU receiving inspection
Handling, storage and preservation inspection (weekly inspection)
Essential operating facilities HVAC requirements inspection.
Communication facilities HVAC requirements inspection
Battery room HVAC requirements inspection
Air moving /cooling equipment duct /pipe connection inspection
Condensate drain lay-out inspection.
• Exhaust fan
Material receiving inspection
Handling, storage and preservation inspection (weekly inspection)
Exhaust and supply fan installation inspection
Battery room HVAC requirements inspection
Essential operating facilities HVAC requirements inspection
Pressurized building HVAC requirements inspection
Communication facilities HVAC requirements inspection
Air moving /cooling equipment duct /pipe connection inspection.
• Air filtration devices and grease filter
Filter receiving inspection.
Filter handling, storage and preservation inspection (weekly inspection).
Pre-filter and final filter installation inspection.
Chemical filter, grease filter installation inspection (if notified).
• HVAC metal Duct system
Duct hangers and supports, metal ducts, duct insulation, duct accessories, Air terminal devices&
flexible connector, fire damper receiving inspection. Handling, storage and preservation inspection
(weekly inspection).
Duct hangers and supports ,metal duct ,grease duct (serving type l hood or as Applicable
inspection)duct insulation, duct accessories Air terminal devices & flexible connector, fire
damper installation inspection.
• Refrigerant piping system
Winess of Pneumatic test and Evacuation test of refrigerant piping.
Witness of refrigerant gas charging.
• Regular visit to lay down yard for assess the health of equipment and materials.
Company : JAIN INFRAPROJECT LTD.
Position : MECHANICAL INSPECTOR.
Clint : SAIL.Durgapur.
Project : Compressed Air Station & Inter Plant Pipe line Projects.
Period : Feb 2012 to March 2014,
Location : DURGAPUR.
JOB PROFILE
• Conduct inspection of received materials of duct and accessories and all HVAC
equipments.
• Review of Material Test Certificates & random physical verification of material prior to
commencement of fabrication activities
• Inspection of orientation, Installation of all HVAC equipment.
• Inspection of ducts and accessories installed prior to insulation and rapping.
• Ensure proper supporting and elevation of ducts installed.
• Inspection of duct insulation and wrapping.
• Verifying all the welding activities is in compliance with the applicable code
& standard and project specification.
• Verifying the welding consumables against WPS, maintaining inventory of stock,
issuance and return records.
• Verification of calibration records for all inspection tools, welding machines,
baking oven, holding oven and quivers.
• Fit up inspection of chilled water piping and condenser water piping.
• Visual inspection of weld joint of chilled water and condenser water piping.
• Monitor and witness for PT.
• Monitor and inspect erection of fire water pipeline across the pipeline corridor.
• Ensure the issuance of appropriate IFC drawings and submittal of final As-built
drawings.
• Conduct quality related meetings with client, vendors and contractors to ensure that quality is
maintained on site.
• Ensure calibration of any tools and equipments used at site or workshop.
• Follow up and implementation for short and long term vendor recommended preservation for
equipments and witness it periodically.
• Fit up and dimensional Inspection prior to welding as required by the approved “Inspection and
Test Plan.
• Witnessing NDE activities like PT, MPT, RT, UT, PMI and Hardness Test.
• Witnessing PQR and performance qualification test.
• Inspection of welding consumables and ensuring the proper storage and handling.
• Verifying/Maintaining consumable control records..
• Verification of welding machines, baking ovens, measuring instruments and pressure gauge
calibration etc
• Dimensional& Visual Inspection Of spool Prior to Painting and preparing Reports
• Witnessing of hydro testing.
• Witness of Pressure and leak testing.
• Co-ordination with client inspectors for all inspection activities.
Company - Randhawa Construction Company
Position - Welding QC Engineer
Period - 20th
2011 april to 2nd
feb 2012.
Location - JAMNAGAR.
JOB PROFILE
• Competency to witness the welding activities in accordance with the Code, Standards and
Specification.
• Review the WPS and welder performance qualification record to assure they are acceptable
for work.
• Reviewing all shop drawings prior to fabrication.
• Confirm welding equipment and instruments are calibrated and operative.
• Ensure all filler metals, base materials are properly marked as specified and acceptable.
• Confirm proper handling of consumables, Weather protection and wind break requirements.
• Confirm weld preparation, Joint fit-up and dimensions are acceptable and correct.
• Confirm welding parameters and techniques are supported by the WPS & WPQ.
• Conducting routine surveillance at field and shop to monitor welding and NDE activities.
• Review of quality documents (RFI) before submitting to client for final inspection.
• Checking revision of latest IFC Drawings used at site for construction. Coordinate with field
engineering Department for latest revision, Design Modification, as built drawings &
Technical Queries etc.
• Ensuring implementation of Quality Plan (ITP), specification, Code and Standards throughout
the project.
• Submitting the RFI for client’s inspection and assist the client inspector during inspection.
• Witnessing PQR and performance qualification test.
• Witnessing and signing of Joint fit-up prior to start welding.
• Performing visual inspection of completed welds.
• Conducting Welders Qualification Test (WQT) and Preparing Welder Qualification Test
records and JCC.
• Evaluating the Welder Performance on weekly basis and conducting the root cause analysis
survey.
• Conducting welders training programs based on rejection rate ratio.
• Verification of welding machines, baking ovens, measuring instruments and pressure gauge
calibration etc.
• Inspection of welding consumables and ensuring the proper storage and handling.
• Verifying/Maintaining consumable control records..
• Witnessing NDE activities like PT, MPT, RT, UT, PMI and Hardness Test.
• Ensuring Pre-heating and Post Weld Heat Treatment as per the WPS.
• Review and Evaluate third party reports.
Company - Vishal Ref & Air conditioning Works
Position - Mechanical Engineer.
Period - 3rd
Jul 2010 – 9th
April 2011
Location - NEW DELHI.
• Plant room chiller pumps installation as per drawing & capacity.
• Execution of chilled water piping hot water piping installation.
• Look into the fabrication and installation of duct as per drawing.
• To prepare Bills of quantity and bill of materials from approved AUTO CAD drawing.
• Execution of installation of VRV system and Ductable splite system.
• Materials take off (MTO) from approved engineering drawings.
• Support Procurement for major Equipments and Materials.
• To ensure that the work is completed in time with the given specifications and standards
• Co-ordinate with subordinates and settles the dispute on site peacefully.
• Attend appraisal meetings with the project engineers / managers in case of delay / change in
drawings / work / unavailability of material and suggest suitably.
• Ensuring execution and completion of the projects well within the financial budget and
allocated manpower.
• Maintained proper documentation of all the daily work being carried out.
SKILL SUMMARY
• Good Inter-Personal and Public Relation Skill
• Excellent ability to lead a team of Foreman, Charge Hands and Skilled /Unskilled Workers.
• Can Work Effectively as an Individual or In a Team..
• Successful Execution of Projects at the Post of Site Mechanical Engineer for Complete HVAC
Services.
SOFTWARE SKILL
• HAP.
• McQuay ductsizer.
• McQuay pipesizer.
• Auto CAD.
• MS Office.
Personal Details
Nationality Indian
Marital status Un married
Passport no H9769867
Date of expiry 7 Jan 2020
AL- JUBAIL,SAUDI ARABIA. Mohsin Iqubal
• Materials take off (MTO) from approved engineering drawings.
• Support Procurement for major Equipments and Materials.
• To ensure that the work is completed in time with the given specifications and standards
• Co-ordinate with subordinates and settles the dispute on site peacefully.
• Attend appraisal meetings with the project engineers / managers in case of delay / change in
drawings / work / unavailability of material and suggest suitably.
• Ensuring execution and completion of the projects well within the financial budget and
allocated manpower.
• Maintained proper documentation of all the daily work being carried out.
SKILL SUMMARY
• Good Inter-Personal and Public Relation Skill
• Excellent ability to lead a team of Foreman, Charge Hands and Skilled /Unskilled Workers.
• Can Work Effectively as an Individual or In a Team..
• Successful Execution of Projects at the Post of Site Mechanical Engineer for Complete HVAC
Services.
SOFTWARE SKILL
• HAP.
• McQuay ductsizer.
• McQuay pipesizer.
• Auto CAD.
• MS Office.
Personal Details
Nationality Indian
Marital status Un married
Passport no H9769867
Date of expiry 7 Jan 2020
AL- JUBAIL,SAUDI ARABIA. Mohsin Iqubal

More Related Content

What's hot

Civil QA&QC Inspector Updated Resume
Civil  QA&QC Inspector Updated ResumeCivil  QA&QC Inspector Updated Resume
Civil QA&QC Inspector Updated ResumeMurugan murugan
 
Senior Inspection Engineer V.Chandrasekhar RESUME as on 01-12-2014
Senior Inspection Engineer V.Chandrasekhar RESUME as on 01-12-2014Senior Inspection Engineer V.Chandrasekhar RESUME as on 01-12-2014
Senior Inspection Engineer V.Chandrasekhar RESUME as on 01-12-2014Chandra ABS IV
 
Qa qc mech enggs or sr.qc inspector welding.piping.pipeline
Qa qc mech enggs or sr.qc inspector welding.piping.pipelineQa qc mech enggs or sr.qc inspector welding.piping.pipeline
Qa qc mech enggs or sr.qc inspector welding.piping.pipelineJOBY Joby.Stephan
 
CV Field Mechanical and Piping Engineer
CV Field  Mechanical  and Piping EngineerCV Field  Mechanical  and Piping Engineer
CV Field Mechanical and Piping EngineerPopovici Adrian
 
Cv of qaqc, inspection engineer, welding, painting & coating inspector. s.san...
Cv of qaqc, inspection engineer, welding, painting & coating inspector. s.san...Cv of qaqc, inspection engineer, welding, painting & coating inspector. s.san...
Cv of qaqc, inspection engineer, welding, painting & coating inspector. s.san...Sangilimuthu Samiayyah
 
QA/QC INSPECTION ENGINEER
QA/QC INSPECTION ENGINEERQA/QC INSPECTION ENGINEER
QA/QC INSPECTION ENGINEERMOHAMMED ZUBAIR
 
QA QC Engineer Mechanical
QA QC Engineer MechanicalQA QC Engineer Mechanical
QA QC Engineer MechanicalFaizan Raza
 
Amjad CV Pipeing sup 2016
Amjad CV Pipeing sup 2016Amjad CV Pipeing sup 2016
Amjad CV Pipeing sup 2016Amjad Goraya
 
Resume - Zubair Khan - Civil QC Inspector
Resume - Zubair Khan - Civil QC InspectorResume - Zubair Khan - Civil QC Inspector
Resume - Zubair Khan - Civil QC InspectorM.ZUBAIR KHAN
 
Resume of QA QC-Welding Engineer with 5+ years of exp
Resume of QA QC-Welding Engineer with 5+ years of expResume of QA QC-Welding Engineer with 5+ years of exp
Resume of QA QC-Welding Engineer with 5+ years of expVijay Raghavan
 
00 resume of site supervisor (Pipeline & welding)
00 resume of site supervisor (Pipeline & welding)00 resume of site supervisor (Pipeline & welding)
00 resume of site supervisor (Pipeline & welding)Mohammad Khan
 
Mohamad Elyaas CV & Certf
Mohamad Elyaas CV & CertfMohamad Elyaas CV & Certf
Mohamad Elyaas CV & CertfMohamad Elyaas
 
Structural & Piping QC Inspector CV - PDF
Structural & Piping QC Inspector CV - PDFStructural & Piping QC Inspector CV - PDF
Structural & Piping QC Inspector CV - PDFChandra Battu
 
MEP Supervisor
MEP SupervisorMEP Supervisor
MEP SupervisorArun Arun
 
Saurabh Shah Piping Engineer CV
Saurabh Shah Piping Engineer CVSaurabh Shah Piping Engineer CV
Saurabh Shah Piping Engineer CVSaurabh Shah
 

What's hot (20)

Civil QA&QC Inspector Updated Resume
Civil  QA&QC Inspector Updated ResumeCivil  QA&QC Inspector Updated Resume
Civil QA&QC Inspector Updated Resume
 
Senior Inspection Engineer V.Chandrasekhar RESUME as on 01-12-2014
Senior Inspection Engineer V.Chandrasekhar RESUME as on 01-12-2014Senior Inspection Engineer V.Chandrasekhar RESUME as on 01-12-2014
Senior Inspection Engineer V.Chandrasekhar RESUME as on 01-12-2014
 
cv piping(1)
cv piping(1)cv piping(1)
cv piping(1)
 
Qa qc mech enggs or sr.qc inspector welding.piping.pipeline
Qa qc mech enggs or sr.qc inspector welding.piping.pipelineQa qc mech enggs or sr.qc inspector welding.piping.pipeline
Qa qc mech enggs or sr.qc inspector welding.piping.pipeline
 
CV Field Mechanical and Piping Engineer
CV Field  Mechanical  and Piping EngineerCV Field  Mechanical  and Piping Engineer
CV Field Mechanical and Piping Engineer
 
Cv of qaqc, inspection engineer, welding, painting & coating inspector. s.san...
Cv of qaqc, inspection engineer, welding, painting & coating inspector. s.san...Cv of qaqc, inspection engineer, welding, painting & coating inspector. s.san...
Cv of qaqc, inspection engineer, welding, painting & coating inspector. s.san...
 
Updated cv
Updated cvUpdated cv
Updated cv
 
QA/QC INSPECTION ENGINEER
QA/QC INSPECTION ENGINEERQA/QC INSPECTION ENGINEER
QA/QC INSPECTION ENGINEER
 
QA QC Engineer Mechanical
QA QC Engineer MechanicalQA QC Engineer Mechanical
QA QC Engineer Mechanical
 
Manohar CV QA-QC
Manohar CV QA-QCManohar CV QA-QC
Manohar CV QA-QC
 
Amjad CV Pipeing sup 2016
Amjad CV Pipeing sup 2016Amjad CV Pipeing sup 2016
Amjad CV Pipeing sup 2016
 
Resume - Zubair Khan - Civil QC Inspector
Resume - Zubair Khan - Civil QC InspectorResume - Zubair Khan - Civil QC Inspector
Resume - Zubair Khan - Civil QC Inspector
 
Resume of QA QC-Welding Engineer with 5+ years of exp
Resume of QA QC-Welding Engineer with 5+ years of expResume of QA QC-Welding Engineer with 5+ years of exp
Resume of QA QC-Welding Engineer with 5+ years of exp
 
E&I inspector cv
E&I inspector cvE&I inspector cv
E&I inspector cv
 
00 resume of site supervisor (Pipeline & welding)
00 resume of site supervisor (Pipeline & welding)00 resume of site supervisor (Pipeline & welding)
00 resume of site supervisor (Pipeline & welding)
 
Mohamad Elyaas CV & Certf
Mohamad Elyaas CV & CertfMohamad Elyaas CV & Certf
Mohamad Elyaas CV & Certf
 
Structural & Piping QC Inspector CV - PDF
Structural & Piping QC Inspector CV - PDFStructural & Piping QC Inspector CV - PDF
Structural & Piping QC Inspector CV - PDF
 
MEP Supervisor
MEP SupervisorMEP Supervisor
MEP Supervisor
 
Saurabh Shah Piping Engineer CV
Saurabh Shah Piping Engineer CVSaurabh Shah Piping Engineer CV
Saurabh Shah Piping Engineer CV
 
resume piping
resume pipingresume piping
resume piping
 

Viewers also liked

GSP TDOT Utility Presentation
GSP TDOT Utility PresentationGSP TDOT Utility Presentation
GSP TDOT Utility PresentationRichard Yeager
 
Bus 16 (Transportation Engineering Dr.Lina Shbeeb)
Bus 16 (Transportation Engineering Dr.Lina Shbeeb)Bus 16 (Transportation Engineering Dr.Lina Shbeeb)
Bus 16 (Transportation Engineering Dr.Lina Shbeeb)Hossam Shafiq I
 
Lec 02 Human Factor (Transportation Engineering Dr.Lina Shbeeb)
Lec 02  Human Factor (Transportation Engineering Dr.Lina Shbeeb) Lec 02  Human Factor (Transportation Engineering Dr.Lina Shbeeb)
Lec 02 Human Factor (Transportation Engineering Dr.Lina Shbeeb) Hossam Shafiq I
 
Driver Vehicle (Transportation Engineering Dr.Lina Shbeeb)
Driver Vehicle (Transportation Engineering Dr.Lina Shbeeb)Driver Vehicle (Transportation Engineering Dr.Lina Shbeeb)
Driver Vehicle (Transportation Engineering Dr.Lina Shbeeb)Hossam Shafiq I
 
CV213 (S5) Transportation Engineering
CV213 (S5) Transportation Engineering CV213 (S5) Transportation Engineering
CV213 (S5) Transportation Engineering TANZEEL HABEEBULLA
 
Vehicle inspection training
Vehicle inspection trainingVehicle inspection training
Vehicle inspection trainingKristin Franks
 
Pre trip inspection(2014)
Pre trip inspection(2014)Pre trip inspection(2014)
Pre trip inspection(2014)Jeff Adams
 
Lec 14 Demand Forecasting 2008 (Transportation Engineering Dr.Lina Shbeeb)
Lec 14 Demand Forecasting 2008 (Transportation Engineering Dr.Lina Shbeeb)Lec 14 Demand Forecasting 2008 (Transportation Engineering Dr.Lina Shbeeb)
Lec 14 Demand Forecasting 2008 (Transportation Engineering Dr.Lina Shbeeb)Hossam Shafiq I
 
Lec 01 Introduction of Transportation Engineering (Transportation Engineering...
Lec 01 Introduction of Transportation Engineering (Transportation Engineering...Lec 01 Introduction of Transportation Engineering (Transportation Engineering...
Lec 01 Introduction of Transportation Engineering (Transportation Engineering...Hossam Shafiq I
 
Transportation Engineering I
Transportation Engineering  ITransportation Engineering  I
Transportation Engineering IGAURAV. H .TANDON
 
Non destructive testing (ndt)
Non destructive testing (ndt)Non destructive testing (ndt)
Non destructive testing (ndt)mapqrs
 
Top 8 quality engineer resume samples
Top 8 quality engineer resume samplesTop 8 quality engineer resume samples
Top 8 quality engineer resume samplesRoyKeane789
 

Viewers also liked (14)

GSP TDOT Utility Presentation
GSP TDOT Utility PresentationGSP TDOT Utility Presentation
GSP TDOT Utility Presentation
 
My CV Jan2017
My CV Jan2017My CV Jan2017
My CV Jan2017
 
Bus 16 (Transportation Engineering Dr.Lina Shbeeb)
Bus 16 (Transportation Engineering Dr.Lina Shbeeb)Bus 16 (Transportation Engineering Dr.Lina Shbeeb)
Bus 16 (Transportation Engineering Dr.Lina Shbeeb)
 
Lec 02 Human Factor (Transportation Engineering Dr.Lina Shbeeb)
Lec 02  Human Factor (Transportation Engineering Dr.Lina Shbeeb) Lec 02  Human Factor (Transportation Engineering Dr.Lina Shbeeb)
Lec 02 Human Factor (Transportation Engineering Dr.Lina Shbeeb)
 
Hours Of Service
Hours Of ServiceHours Of Service
Hours Of Service
 
Driver Vehicle (Transportation Engineering Dr.Lina Shbeeb)
Driver Vehicle (Transportation Engineering Dr.Lina Shbeeb)Driver Vehicle (Transportation Engineering Dr.Lina Shbeeb)
Driver Vehicle (Transportation Engineering Dr.Lina Shbeeb)
 
CV213 (S5) Transportation Engineering
CV213 (S5) Transportation Engineering CV213 (S5) Transportation Engineering
CV213 (S5) Transportation Engineering
 
Vehicle inspection training
Vehicle inspection trainingVehicle inspection training
Vehicle inspection training
 
Pre trip inspection(2014)
Pre trip inspection(2014)Pre trip inspection(2014)
Pre trip inspection(2014)
 
Lec 14 Demand Forecasting 2008 (Transportation Engineering Dr.Lina Shbeeb)
Lec 14 Demand Forecasting 2008 (Transportation Engineering Dr.Lina Shbeeb)Lec 14 Demand Forecasting 2008 (Transportation Engineering Dr.Lina Shbeeb)
Lec 14 Demand Forecasting 2008 (Transportation Engineering Dr.Lina Shbeeb)
 
Lec 01 Introduction of Transportation Engineering (Transportation Engineering...
Lec 01 Introduction of Transportation Engineering (Transportation Engineering...Lec 01 Introduction of Transportation Engineering (Transportation Engineering...
Lec 01 Introduction of Transportation Engineering (Transportation Engineering...
 
Transportation Engineering I
Transportation Engineering  ITransportation Engineering  I
Transportation Engineering I
 
Non destructive testing (ndt)
Non destructive testing (ndt)Non destructive testing (ndt)
Non destructive testing (ndt)
 
Top 8 quality engineer resume samples
Top 8 quality engineer resume samplesTop 8 quality engineer resume samples
Top 8 quality engineer resume samples
 

Similar to RESUME FOR QC INSPECTOR

Similar to RESUME FOR QC INSPECTOR (20)

Resume Khurshid
Resume KhurshidResume Khurshid
Resume Khurshid
 
ars resume
ars resumears resume
ars resume
 
Muhammed Riswan-QC rev1
Muhammed Riswan-QC rev1Muhammed Riswan-QC rev1
Muhammed Riswan-QC rev1
 
PRAKASH VIJAYAN NEW CV 2015
PRAKASH VIJAYAN NEW CV 2015PRAKASH VIJAYAN NEW CV 2015
PRAKASH VIJAYAN NEW CV 2015
 
Ganesan Plant Inspector_CV
Ganesan Plant Inspector_CVGanesan Plant Inspector_CV
Ganesan Plant Inspector_CV
 
QA,QC INSPECTOR ANANDA RAM PRASATH.V RESUME
QA,QC INSPECTOR ANANDA RAM PRASATH.V RESUMEQA,QC INSPECTOR ANANDA RAM PRASATH.V RESUME
QA,QC INSPECTOR ANANDA RAM PRASATH.V RESUME
 
Rajasekaran CV-updated
Rajasekaran CV-updatedRajasekaran CV-updated
Rajasekaran CV-updated
 
MD.NAFISUL HAQUE_original
MD.NAFISUL HAQUE_originalMD.NAFISUL HAQUE_original
MD.NAFISUL HAQUE_original
 
Praneshkumar QC Supervisor
Praneshkumar QC SupervisorPraneshkumar QC Supervisor
Praneshkumar QC Supervisor
 
Nagarajan Saravanan
Nagarajan SaravananNagarajan Saravanan
Nagarajan Saravanan
 
ROGELIO DE GUZMAN Piping welding Inspector
ROGELIO DE GUZMAN  Piping  welding InspectorROGELIO DE GUZMAN  Piping  welding Inspector
ROGELIO DE GUZMAN Piping welding Inspector
 
Resume
ResumeResume
Resume
 
Resume_Chintan_Gohil_
Resume_Chintan_Gohil_Resume_Chintan_Gohil_
Resume_Chintan_Gohil_
 
ANAND CV
ANAND CVANAND CV
ANAND CV
 
PRAGASH-QC INSPECTION ENGG Feb'2016
PRAGASH-QC INSPECTION ENGG Feb'2016PRAGASH-QC INSPECTION ENGG Feb'2016
PRAGASH-QC INSPECTION ENGG Feb'2016
 
Khurshid WI cswip 3.1
Khurshid WI cswip 3.1Khurshid WI cswip 3.1
Khurshid WI cswip 3.1
 
QA/QC Engineer - simon lawrence
QA/QC Engineer - simon lawrenceQA/QC Engineer - simon lawrence
QA/QC Engineer - simon lawrence
 
CV
CVCV
CV
 
Resume
ResumeResume
Resume
 
SivakumarDhanapalan Resume@Inspector
SivakumarDhanapalan Resume@Inspector SivakumarDhanapalan Resume@Inspector
SivakumarDhanapalan Resume@Inspector
 

RESUME FOR QC INSPECTOR

  • 1. CURRICULAM VITAE Name : Mohsin Iqubal Position Applied : HVAC QC INSPECTOR / WELDING INSPECTOR Mobile : +966-515098202/+91-507246083 Email: connect2mohsin85@gmail.com CAREER OBJECTIVE Seeking assignments in the domain of Mechanical Engineering to obtain a responsible and challenging position in an organization where I could leverage my background of technical study to contribute to the Organizational growth and development. WORK SUMMARY A Mechanical Engineer having over 6 years of independent rich work experience in HVAC (Heating Ventilation Air-conditioning) & Welding in large commercial and Industrial Projects in India and Saudi Arabia. Knowledge of major industry Codes and Standards like ASHRAE, SMACNA, NFPA, UMC,ARAMCO,SADARA, ASME Sec IX,V,II,B31.3 etc. EDUCATIONAL QUALIFICATION First class Graduate Mechanical Engineer from MACET, Patna in 2010. ADDITIONAL PROFESSIONAL QUALIFICATION CSWIP 3.1 WELDING INSPECTOR.( Certificate No-97323) ASNT LEVEL II,(PT ,UT ,MT, RT, VT). HVAC (Heating ventilation air conditioning) Designing and draughting. PROFESSIONAL WORK EXPERIENCE DAELIM SAUDI ARABIA LTD. Client :SADARA ( Saudi Aramco and Dow) Project : Sadara Isocynates Project Position : HVAC QC INSPECTOR Period : May 2014 to till date. JOB PROFILE • Reviewed quality related documents, i.e. approved project procedures, applicable drawings, vendors, manual and instructions, technical specifications and standard codes such as SMACNA,ASHRAE,UMC for inspect ability and acceptability. • Understand clearly HVAC system drawing of the project. • Checked and understand the HVAC equipment schedule plan, to know the equipment specification and identification of location ,where to be install. • During the receiving inspection RFI must be checked the documents like approved P.O, Delivery note, certificate from the vendor of quality test, vendor approval and carefully check the equipment from any damage during the transport delivery or factory damage.
  • 2. • Air handling Unit (AHU) AHU receiving inspection. Handling, storage and preservation inspection (weekly inspection). Essential operating facilities HVAC requirements inspection. Pressurized building HVAC requirements inspection. Communication facilities HVAC requirements inspection. Battery room HVAC requirements inspection. • Packaged Air conditioning unit (PACU) system PACU receiving inspection Handling, storage and preservation inspection (weekly inspection) drain lay-out inspection. • Air Cool Condensing Unit(ACCU) ACCU receiving inspection Handling, storage and preservation inspection (weekly inspection) Essential operating facilities HVAC requirements inspection. Communication facilities HVAC requirements inspection Battery room HVAC requirements inspection Air moving /cooling equipment duct /pipe connection inspection Condensate drain lay-out inspection. • Exhaust fan Material receiving inspection Handling, storage and preservation inspection (weekly inspection) Exhaust and supply fan installation inspection Battery room HVAC requirements inspection Essential operating facilities HVAC requirements inspection Pressurized building HVAC requirements inspection Communication facilities HVAC requirements inspection Air moving /cooling equipment duct /pipe connection inspection. • Air filtration devices and grease filter Filter receiving inspection. Filter handling, storage and preservation inspection (weekly inspection). Pre-filter and final filter installation inspection. Chemical filter, grease filter installation inspection (if notified). • HVAC metal Duct system Duct hangers and supports, metal ducts, duct insulation, duct accessories, Air terminal devices& flexible connector, fire damper receiving inspection. Handling, storage and preservation inspection (weekly inspection). Duct hangers and supports ,metal duct ,grease duct (serving type l hood or as Applicable inspection)duct insulation, duct accessories Air terminal devices & flexible connector, fire damper installation inspection. • Refrigerant piping system Winess of Pneumatic test and Evacuation test of refrigerant piping. Witness of refrigerant gas charging. • Regular visit to lay down yard for assess the health of equipment and materials.
  • 3. Company : JAIN INFRAPROJECT LTD. Position : MECHANICAL INSPECTOR. Clint : SAIL.Durgapur. Project : Compressed Air Station & Inter Plant Pipe line Projects. Period : Feb 2012 to March 2014, Location : DURGAPUR. JOB PROFILE • Conduct inspection of received materials of duct and accessories and all HVAC equipments. • Review of Material Test Certificates & random physical verification of material prior to commencement of fabrication activities • Inspection of orientation, Installation of all HVAC equipment. • Inspection of ducts and accessories installed prior to insulation and rapping. • Ensure proper supporting and elevation of ducts installed. • Inspection of duct insulation and wrapping. • Verifying all the welding activities is in compliance with the applicable code & standard and project specification. • Verifying the welding consumables against WPS, maintaining inventory of stock, issuance and return records. • Verification of calibration records for all inspection tools, welding machines, baking oven, holding oven and quivers. • Fit up inspection of chilled water piping and condenser water piping. • Visual inspection of weld joint of chilled water and condenser water piping. • Monitor and witness for PT. • Monitor and inspect erection of fire water pipeline across the pipeline corridor. • Ensure the issuance of appropriate IFC drawings and submittal of final As-built drawings. • Conduct quality related meetings with client, vendors and contractors to ensure that quality is maintained on site. • Ensure calibration of any tools and equipments used at site or workshop. • Follow up and implementation for short and long term vendor recommended preservation for equipments and witness it periodically. • Fit up and dimensional Inspection prior to welding as required by the approved “Inspection and Test Plan. • Witnessing NDE activities like PT, MPT, RT, UT, PMI and Hardness Test. • Witnessing PQR and performance qualification test. • Inspection of welding consumables and ensuring the proper storage and handling. • Verifying/Maintaining consumable control records.. • Verification of welding machines, baking ovens, measuring instruments and pressure gauge calibration etc • Dimensional& Visual Inspection Of spool Prior to Painting and preparing Reports • Witnessing of hydro testing. • Witness of Pressure and leak testing.
  • 4. • Co-ordination with client inspectors for all inspection activities. Company - Randhawa Construction Company Position - Welding QC Engineer Period - 20th 2011 april to 2nd feb 2012. Location - JAMNAGAR. JOB PROFILE • Competency to witness the welding activities in accordance with the Code, Standards and Specification. • Review the WPS and welder performance qualification record to assure they are acceptable for work. • Reviewing all shop drawings prior to fabrication. • Confirm welding equipment and instruments are calibrated and operative. • Ensure all filler metals, base materials are properly marked as specified and acceptable. • Confirm proper handling of consumables, Weather protection and wind break requirements. • Confirm weld preparation, Joint fit-up and dimensions are acceptable and correct. • Confirm welding parameters and techniques are supported by the WPS & WPQ. • Conducting routine surveillance at field and shop to monitor welding and NDE activities. • Review of quality documents (RFI) before submitting to client for final inspection. • Checking revision of latest IFC Drawings used at site for construction. Coordinate with field engineering Department for latest revision, Design Modification, as built drawings & Technical Queries etc. • Ensuring implementation of Quality Plan (ITP), specification, Code and Standards throughout the project. • Submitting the RFI for client’s inspection and assist the client inspector during inspection. • Witnessing PQR and performance qualification test. • Witnessing and signing of Joint fit-up prior to start welding. • Performing visual inspection of completed welds. • Conducting Welders Qualification Test (WQT) and Preparing Welder Qualification Test records and JCC. • Evaluating the Welder Performance on weekly basis and conducting the root cause analysis survey. • Conducting welders training programs based on rejection rate ratio. • Verification of welding machines, baking ovens, measuring instruments and pressure gauge calibration etc. • Inspection of welding consumables and ensuring the proper storage and handling. • Verifying/Maintaining consumable control records.. • Witnessing NDE activities like PT, MPT, RT, UT, PMI and Hardness Test. • Ensuring Pre-heating and Post Weld Heat Treatment as per the WPS. • Review and Evaluate third party reports. Company - Vishal Ref & Air conditioning Works Position - Mechanical Engineer. Period - 3rd Jul 2010 – 9th April 2011 Location - NEW DELHI. • Plant room chiller pumps installation as per drawing & capacity. • Execution of chilled water piping hot water piping installation. • Look into the fabrication and installation of duct as per drawing. • To prepare Bills of quantity and bill of materials from approved AUTO CAD drawing. • Execution of installation of VRV system and Ductable splite system.
  • 5. • Materials take off (MTO) from approved engineering drawings. • Support Procurement for major Equipments and Materials. • To ensure that the work is completed in time with the given specifications and standards • Co-ordinate with subordinates and settles the dispute on site peacefully. • Attend appraisal meetings with the project engineers / managers in case of delay / change in drawings / work / unavailability of material and suggest suitably. • Ensuring execution and completion of the projects well within the financial budget and allocated manpower. • Maintained proper documentation of all the daily work being carried out. SKILL SUMMARY • Good Inter-Personal and Public Relation Skill • Excellent ability to lead a team of Foreman, Charge Hands and Skilled /Unskilled Workers. • Can Work Effectively as an Individual or In a Team.. • Successful Execution of Projects at the Post of Site Mechanical Engineer for Complete HVAC Services. SOFTWARE SKILL • HAP. • McQuay ductsizer. • McQuay pipesizer. • Auto CAD. • MS Office. Personal Details Nationality Indian Marital status Un married Passport no H9769867 Date of expiry 7 Jan 2020 AL- JUBAIL,SAUDI ARABIA. Mohsin Iqubal
  • 6. • Materials take off (MTO) from approved engineering drawings. • Support Procurement for major Equipments and Materials. • To ensure that the work is completed in time with the given specifications and standards • Co-ordinate with subordinates and settles the dispute on site peacefully. • Attend appraisal meetings with the project engineers / managers in case of delay / change in drawings / work / unavailability of material and suggest suitably. • Ensuring execution and completion of the projects well within the financial budget and allocated manpower. • Maintained proper documentation of all the daily work being carried out. SKILL SUMMARY • Good Inter-Personal and Public Relation Skill • Excellent ability to lead a team of Foreman, Charge Hands and Skilled /Unskilled Workers. • Can Work Effectively as an Individual or In a Team.. • Successful Execution of Projects at the Post of Site Mechanical Engineer for Complete HVAC Services. SOFTWARE SKILL • HAP. • McQuay ductsizer. • McQuay pipesizer. • Auto CAD. • MS Office. Personal Details Nationality Indian Marital status Un married Passport no H9769867 Date of expiry 7 Jan 2020 AL- JUBAIL,SAUDI ARABIA. Mohsin Iqubal